Commit Graph

26 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
3d5134ee83 [POWERPC] Rewrite IO allocation & mapping on powerpc64
This rewrites pretty much from scratch the handling of MMIO and PIO
space allocations on powerpc64.  The main goals are:

 - Get rid of imalloc and use more common code where possible
 - Simplify the current mess so that PIO space is allocated and
   mapped in a single place for PCI bridges
 - Handle allocation constraints of PIO for all bridges including
   hot plugged ones within the 2GB space reserved for IO ports,
   so that devices on hotplugged busses will now work with drivers
   that assume IO ports fit in an int.
 - Cleanup and separate tracking of the ISA space in the reserved
   low 64K of IO space. No ISA -> Nothing mapped there.

I booted a cell blade with IDE on PIO and MMIO and a dual G5 so
far, that's it :-)

With this patch, all allocations are done using the code in
mm/vmalloc.c, though we use the low level __get_vm_area with
explicit start/stop constraints in order to manage separate
areas for vmalloc/vmap, ioremap, and PCI IOs.

This greatly simplifies a lot of things, as you can see in the
diffstat of that patch :-)

A new pair of functions pcibios_map/unmap_io_space() now replace
all of the previous code that used to manipulate PCI IOs space.
The allocation is done at mapping time, which is now called from
scan_phb's, just before the devices are probed (instead of after,
which is by itself a bug fix). The only other caller is the PCI
hotplug code for hot adding PCI-PCI bridges (slots).

imalloc is gone, as is the "sub-allocation" thing, but I do beleive
that hotplug should still work in the sense that the space allocation
is always done by the PHB, but if you unmap a child bus of this PHB
(which seems to be possible), then the code should properly tear
down all the HPTE mappings for that area of the PHB allocated IO space.

I now always reserve the first 64K of IO space for the bridge with
the ISA bus on it. I have moved the code for tracking ISA in a separate
file which should also make it smarter if we ever are capable of
hot unplugging or re-plugging an ISA bridge.

This should have a side effect on platforms like powermac where VGA IOs
will no longer work. This is done on purpose though as they would have
worked semi-randomly before. The idea at this point is to isolate drivers
that might need to access those and fix them by providing a proper
function to obtain an offset to the legacy IOs of a given bus.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:56 +10:00
Linas Vepstas
e1d04c9769 [POWERPC] Add EEH sysfs blinkenlights
Add sysfs blinkenlights for EEH statistics.  Shuffle the
eeh_add_device_tree() call so that it appears in the correct
sequence.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/Makefile    |    2
 arch/powerpc/platforms/pseries/eeh.c       |    4 +
 arch/powerpc/platforms/pseries/eeh_cache.c |    2
 arch/powerpc/platforms/pseries/eeh_sysfs.c |   84 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/pseries/pci_dlpar.c |    7 +-
 include/asm-powerpc/ppc-pci.h              |    3 +
 6 files changed, 98 insertions(+), 4 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:55 +10:00
Linas Vepstas
17213c3bf6 [POWERPC] Assorted janitorial EEH cleanups
Assorted minor cleanups to EEH code; -- use literals, use
kerneldoc format.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c        |   13 ++++++++++---
 arch/powerpc/platforms/pseries/eeh_driver.c |    7 ++++---
 include/asm-powerpc/ppc-pci.h               |   18 +++++++++++++++---
 3 files changed, 29 insertions(+), 9 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-10 21:28:13 +10:00
Michael Opdenacker
59c51591a0 Fix occurrences of "the the "
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:57:56 +02:00
Linas Vepstas
9c547768e7 [POWERPC] EEH: wait for slot status
Modify routine that returns PCI slot status to wait for slot status
to become available. This is needed, as slots that are in some remote
card cage may go offline for extended periods of time. New users for
this routine in following patches.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-22 22:52:54 +11:00
Stephen Rothwell
36241ce695 [POWERPC] Make find_and_init_pbs() a void function
It always returned 0 and noone checked.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:26 +11:00
Stephen Rothwell
bed5927581 [POWERPC] Allow pSeries to build without CONFIG_PCI
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:26 +11:00
Benjamin Herrenschmidt
4c9d2800be [POWERPC] Generic OF platform driver for PCI host bridges.
When enabled in Kconfig, it will pick up any of_platform_device
matching it's match list (currently type "pci", "pcix", "pcie",
or "ht" and setup a PHB for it.

Platform must provide a ppc_md.pci_setup_phb() for it to work
(for doing the necessary initialisations specific to a given PHB
like setting up the config space ops).

It's currently only available on 64 bits as the 32 bits PCI code
can't quite cope with it in it's current form. I will fix that
later.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:49 +11:00
Benjamin Herrenschmidt
f90bb153b1 [POWERPC] Make pci_read_irq_line the default
This patch reworks the way IRQs are fixed up on PCI for arch powerpc.

It makes pci_read_irq_line() called by default in the PCI code for
devices that are probed, and add an optional per-device fixup in
ppc_md for platforms that really need to correct what they obtain
from pci_read_irq_line().

It also removes ppc_md.irq_bus_setup which was only used by pSeries
and should not be needed anymore.

I've also removed the pSeries s7a workaround as it can't work with
the current interrupt code anyway. I'm trying to get one of these
machines working so I can test a proper fix for that problem.

I also haven't updated the old-style fixup code from 85xx_cds.c
because it's actually buggy :) It assigns pci_dev->irq hard coded
numbers which is no good with the new IRQ mapping code. It should
at least use irq_create_mapping(NULL, hard_coded_number); and possibly
also set_irq_type() to set them as level low.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:00:04 +11:00
Linas Vepstas
47b5c838af [POWERPC] EEH: enable MMIO/DMA on frozen slot
Add wrapper around the rtas call to enable MMIO or DMA on a frozen pci
slot.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-21 22:59:14 +10:00
John Rose
92eb4602eb [PATCH] powerpc: properly configure DDR/P5IOC children devs
The dynamic add path for PCI Host Bridges can fail to configure children
adapters under P5IOC controllers.  It fails to properly fixup bus/device
resources, and it fails to properly enable EEH.  Both of these steps
need to occur before any children devices are enabled in
pci_bus_add_devices().

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16 16:55:07 +11:00
Linas Vepstas
7684b40cb5 [PATCH] powerpc: Save device BARs much earlier in the boot sequence
241-eeh-save-bars-earlier.patch

Save the PCI device bars *before* any PCI probing is done.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 76c902b919098860f3d4e125f847abcc4cb1782a commit)
2006-01-10 15:30:39 +11:00
Linas Vepstas
b6495c0c8f [PATCH] powerpc: Don't continue with PCI Error recovery if slot reset failed.
238-eeh-stop-if-reset_failed.patch

If the firmware is unable to reset the PCI slot for some reason, then
don't attempt any further recovery steps after that point.  Instead,
mark the device as permanently failed.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from e06b942521eb2cdaf232726f45a820d5837acb12 commit)
2006-01-10 15:30:14 +11:00
Linas Vepstas
9fb40eb883 [PATCH] powerpc: Remove duplicate code
234-eeh-find-pe.patch

The find_device_pe() routine is duplicated in two files. Remove one of
the two copies, declare the other extern.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 48408e708282d4d0269136ff27ea5acbd9410b5a commit)
2006-01-10 15:29:33 +11:00
Linas Vepstas
5d5a0936b3 [PATCH] powerpc: Split out PCI address cache to its own file
25-pci-address-cache.patch

The core EEH file is rather large. This patch splits out a self-contained
chunk of it into its own file.  This is the chunk that performes the
caching and lookup of pci devices based on the i/o addresses of thier
resoures.  This code is almos architecture-independent and could be
used by any system that wanted to find a pci device based only on
the i/o address used by the device.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from b0b291d59906d4a9a89ed9e34d9fd684c7188924 commit)
2006-01-10 15:29:04 +11:00
Linas Vepstas
77bd741561 [PATCH] powerpc: PCI Error Recovery: PPC64 core recovery routines
Various PCI bus errors can be signaled by newer PCI controllers.  The
core error recovery routines are architecture dependent.  This patch adds
a recovery infrastructure for the  PPC64 pSeries systems.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from e8ca11b460c4c9c7fa6b529be221529ebd770e38 commit)
2006-01-10 15:28:32 +11:00
Arnd Bergmann
88ced03149 [PATCH] powerpc: sanitize header files for user space includes
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that
are not meant for use by user space, include/asm-powerpc does
not have this yet.

This patch gets us a lot closer there. There are a few cases
where I was not sure, so I left them out. I have verified
that no CONFIG_* symbols are used outside of __KERNEL__
any more and that there are no obvious compile errors when
including any of the headers in user space libraries.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:13:08 +11:00
Paul Mackerras
f8ef270596 powerpc: Merge pci.h
This involves some minor changes: a few unused functions that the
ppc32 pci.c provides are no longer declared here or exported;
pcibios_assign_all_busses now just refers to the pci_assign_all_buses
variable on both 32-bit and 64-bit; pcibios_scan_all_fns is now
just 0 instead of a function that always returns 0 on 64-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-19 20:46:04 +11:00
Benjamin Herrenschmidt
b5166cc252 [PATCH] powerpc: pci_64 fixes & cleanups
I discovered that in some cases (PowerMac for example) we wouldn't
properly map the PCI IO space on recent kernels. In addition, the code
for initializing PCI host bridges was scattered all over the place with
some duplication between platforms.

This patch fixes the problem and does a small cleanup by creating a
pcibios_alloc_controller() in pci_64.c that is similar to the one in
pci_32.c (just takes an additional device node argument) that takes care
of all the grunt allocation and initialisation work. It should work for
both boot time and dynamically allocated PHBs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 13:29:46 +11:00
Linas Vepstas
d9564ad114 [PATCH] ppc64: mark failed devices
17-eeh-slot-marking-bug.patch

A device that experiences a PCI outage may be just one deivce out
of many that was affected. In order to avoid repeated reports of
a failure, the entire tree of affected devices should be marked
as failed. This patch marks up the entire tree.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 16:00:32 +11:00
Linas Vepstas
8b553f32db [PATCH] ppc64: Save & restore of PCI device BARS
14-eeh-device-bar-save.patch

After a PCI device has been resest, the device BAR's and other config
space info must be restored to the same state as they were in when
the firmware first handed us this device.  This will allow the
PCI device driver, when restarted, to correctly recognize and set up
the device.

Tis patch saves the device config space as early as reasonable after
the firmware has handed over the device.  Te state resore funcion
is inteded for use by the EEH recovery routines.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:38:14 +11:00
Linas Vepstas
6dee3fb940 [PATCH] ppc64: PCI reset support routines
13-eeh-recovery-support-routines.patch

EEH Recovery support routines

This patch adds routines required to help drive the recovery of
EEH-frozen slots.  The main function is to drive the PCI #RST
signal line high for a qurter of a second, and then allow for
a second & a half of settle time.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:38:11 +11:00
Linas Vepstas
56b0fca3a0 [PATCH] ppc64: PCI address cache minor fixes
03-eeh-addr-cache-cleanup.patch

This is a minor patch to clean up a buglet related to the PCI address cache.
(The buglet doesn't manifes itself unless there are also bugs elsewhere,
which is why its minor.).  Also:

-- Improved debug printing.
-- Declare some private routines as static
-- Adds reference counting to struct pci_dn->pcidev structure

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:33:07 +11:00
linas
ae65a391ca [PATCH] ppc64: uniform usage of bus unit id interfaces
01-pci-dn-uniformization.patch

This patch changes the rtas_pci interface to use the new struct pci_dn
structure for two routines that work with pci device nodes.

This patch also does some minor janitorial work: it uses some handy macros
and cleans up some trailing whitespace in the affected file.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:30:25 +11:00
John Rose
ead837174d [PATCH] dlpar enable for OF pci probe
This patch contains the arch/ppc64 bits for enabling DLPAR and PCI
Hotplug for the new OF-based PCI probe mechanism.  This code path is
currently broken.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:09:02 +11:00
Stephen Rothwell
d387899f3f powerpc: Move iSeries_pci.c to powerpc/platform/iseries
and rename it to pci.c.  This also required moving
arch/ppc64/kernel/pci.h into include/asm-powerpc (called
ppc-pci.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:50:25 +10:00