Commit Graph

724 Commits

Author SHA1 Message Date
Linus Torvalds
7fd23a2471 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
  HID: add support for Logitech Driving Force Pro wheel
  HID: hid-ortek: remove spurious reference
  HID: add support for Ortek PKB-1700
  HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
  HID: hid-ntrig: init settle and mode check
  HID: merge hid-egalax into hid-multitouch
  HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
  HID: ntrig remove if and drop an indent
  HID: ACRUX - activate the device immediately after binding
  HID: ntrig: apply NO_INIT_REPORTS quirk
  HID: hid-magicmouse: Correct touch orientation direction
  HID: ntrig don't dereference unclaimed hidinput
  HID: Do not create input devices for feature reports
  HID: bt hidp: send Output reports using SET_REPORT on the Control channel
  HID: hid-sony.c: Fix sending Output reports to the Sixaxis
  HID: add support for Keytouch IEC 60945
  HID: Add HID Report Descriptor to sysfs
  HID: add IRTOUCH infrared USB to hid_have_special_driver
  HID: kernel oops in out_cleanup in function hidinput_connect
  HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
  ...
2011-03-18 10:35:30 -07:00
Jiri Kosina
65b06194c9 Merge branches 'dragonrise', 'hidraw-feature', 'multitouch', 'ntrig', 'roccat', 'upstream' and 'upstream-fixes' into for-linus 2011-03-17 14:31:46 +01:00
Linus Torvalds
7a6362800c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
2011-03-16 16:29:25 -07:00
Linus Torvalds
e6bee325e4 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
2011-03-16 15:11:04 -07:00
John W. Linville
a177584609 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 2011-03-04 13:59:44 -05:00
Szymon Janc
b8534e0f2b Bluetooth: Fix some small code style issues in mgmt.c
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-01 22:19:48 -03:00
Szymon Janc
3cf2a4f6ca Bluetooth: Use variable name instead of type in sizeof()
As written in the CodingStyle doc.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-01 22:19:10 -03:00
Szymon Janc
8ce6284ea3 Bluetooth: Remove unused code from get_connections
Command pointer was a leftover after moving controller index to
mgmt_hdr.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-01 22:18:54 -03:00
Szymon Janc
34eb525c1f Bluetooth: Log all parameters in cmd_status for easier debugging
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-01 22:18:47 -03:00
Szymon Janc
8020c16a6c Bluetooth: Fix possible NULL pointer dereference in cmd_complete
It is now possible to create command complete event without specific
reply data by passing NULL as reply with len 0. Check pointer before
calling memcpy to avoid undefined behaviour.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-01 22:18:17 -03:00
Gustavo F. Padovan
d45dcef770 Bluetooth: Fix BT_L2CAP and BT_SCO in Kconfig
If we want something "bool" built-in in something "tristate" it can't
"depend on" the tristate config option.

Report by DaveM:

   I give it 'y' just to make it happen, for both, and afterways no
   matter how many times I rerun "make oldconfig" I keep seeing things
   like this in my build:

scripts/kconfig/conf --silentoldconfig Kconfig
include/config/auto.conf:986:warning: symbol value 'm' invalid for BT_SCO
include/config/auto.conf:3156:warning: symbol value 'm' invalid for BT_L2CAP

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28 14:06:53 -05:00
Ville Tervo
30e7627219 Bluetooth: Use ERR_PTR as return error from hci_connect
Use ERR_PTR mechanism to return error from hci_connect.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27 17:11:29 -03:00
Szymon Janc
bdce7bafb7 Bluetooth: Validate data size before accessing mgmt commands
Crafted (too small) data buffer could result in reading data outside of buffer.
Validate buffer size and return EINVAL if size is wrong.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27 16:57:07 -03:00
Szymon Janc
4e51eae9cd Bluetooth: Move index to common header in management interface
Most mgmt commands and event are related to hci adapter. Moving index to
common header allow to easily use it in command status while reporting errors.
For those not related to adapter use MGMT_INDEX_NONE (0xFFFF) as index.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27 16:56:41 -03:00
Szymon Janc
779cb85016 Bluetooth: Use proper command structure in remove_uuid
The structure used for command was wrong (probably copy-paste mistake).

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27 16:24:05 -03:00
Gustavo F. Padovan
50899e8d3a Bluetooth: Remove duplicated BT_INFO() from L2CAP
The message for the initialization of the L2CAP layer was being
printed twice.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25 22:37:10 -03:00
Anand Gadiyar
0ed54dad52 Bluetooth: remove unnecessary call to hci_sock_cleanup
hci_sock_cleanup is already called after the sock_err label.
It appears that we can drop this call.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25 22:36:58 -03:00
Greg Kroah-Hartman
f227e08b71 Merge 2.6.38-rc6 into tty-next
This was to resolve a merge issue with drivers/char/Makefile and
drivers/tty/serial/68328serial.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 11:36:31 -08:00
Anand Gadiyar
b7440a14f2 Bluetooth: fix build break on hci_sock.c
Linux-next as of 20110217 complains when building for OMAP1.

  LD      vmlinux
`hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o
`hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o
make: *** [vmlinux] Error 1

A recent patch by Gustavo (Bluetooth: Merge L2CAP and SCO modules
into bluetooth.ko) introduced this by calling the hci_sock_cleanup
function in the error path of bt_init.

Fix this by dropping the __exit marking for hci_sock_cleanup.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-22 08:43:52 -03:00
Antonio Ospite
97e1efbbe1 HID: bt hidp: send Output reports using SET_REPORT on the Control channel
The current implementation of hidp_output_raw_report() relies only on
the Control channel even for Output reports, and the BT HID
specification [1] does not mention using the DATA message for Output
reports on the Control channel (see section 7.9.1 and also Figure 11:
SET_ Flow Chart), so let us just use SET_REPORT.

This also fixes sending Output reports to some devices (like Sony
Sixaxis) which are not able to handle DATA messages on the Control
channel.

Ideally hidp_output_raw_report() could be improved to use this scheme:
  Feature Report -- SET_REPORT on the Control channel
  Output Report  -- DATA on the Interrupt channel
for more efficiency, but as said above, right now only the Control
channel is used.

[1] http://www.bluetooth.com/Specification%20Documents/HID_SPEC_V10.pdf

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-22 11:08:13 +01:00
Anderson Briglia
15c4794fe2 Bluetooth: Fix LE conn creation
This patch prevents a crash when remote host tries to create a LE
link which already exists. i.e.: call l2test twice passing the
same parameters.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:57:41 -03:00
Johan Hedberg
a664b5bc77 Bluetooth: Fix unnecessary list traversal in mgmt_pending_remove
All of the places that need to call mgmt_pending_remove already have a
pointer to the pending command, so searching for the command in the list
doesn't make sense. The added benefit is that many places that
previously had to call list_del + mgmt_pending_free can just call
mgmt_pending_remove now.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:45 -03:00
Johan Hedberg
a958355699 Bluetooth: Fix inititial value for remote authentication requirements
The remote authentication requirements for conections need to be
initialized to 0xff (unknown) since it is possible that we receive a IO
Capability Request before we have received information about the remote
requirements.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:44 -03:00
Johan Hedberg
2a61169209 Bluetooth: Add mgmt_auth_failed event
To properly track bonding completion an event to indicate authentication
failure is needed. This event will be sent whenever an authentication
complete HCI event with a non-zero status comes. It will also be sent
when we're acting in acceptor role for SSP authentication in which case
the controller will send a Simple Pairing Complete event.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:44 -03:00
Johan Hedberg
ac56fb13c0 Bluetooth: Fix mgmt_pin_code_reply return parameters
The command complete event for mgmt_pin_code_reply &
mgmt_pin_code_neg_reply should have the adapter index, Bluetooth address
as well as the status.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:44 -03:00
Johan Hedberg
59a24b5d0d Bluetooth: Fix mgmt_pin_code_reply command status opcode
The opcode for the ENODEV case was wrong (probably copy-paste mistake).

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:44 -03:00
Johan Hedberg
a5c296832b Bluetooth: Add management support for user confirmation request
This patch adds support for the user confirmation (numeric comparison)
Secure Simple Pairing authentication method.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:44 -03:00
Johan Hedberg
e9a416b5ce Bluetooth: Add mgmt_pair_device command
This patch adds a new mgmt_pair_device which can be used to initiate a
dedicated bonding procedure. Some extra callbacks are added to the
hci_conn struct so that the pairing code can get notified of the
completion of the procedure.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:43 -03:00
Johan Hedberg
366a033698 Bluetooth: Make pending_add return a pointer to the added entry
This makes it more convenient to do manipulations on the entry (needed
by later commits).

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21 17:22:43 -03:00
John W. Linville
b67afe7f43 Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
Conflicts:
	drivers/bluetooth/ath3k.c
	drivers/bluetooth/btusb.c
2011-02-18 17:03:41 -05:00
Gustavo F. Padovan
8ffd878419 Bluetooth: fix checkpatch errors in af_bluetooth.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 19:24:05 -03:00
Gustavo F. Padovan
602f9887cd Bluetooth: Fix errors reported by checkpatch.pl
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 19:22:19 -03:00
Gustavo F. Padovan
e2174ca430 Bluetooth: fix errors reported by checkpatch.pl
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 19:16:55 -03:00
Alan Cox
6caa76b778 tty: now phase out the ioctl file pointer for good
Only oddities here are a couple of drivers that bogusly called the ldisc
helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes
away.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:59:56 -08:00
Alan Cox
20b9d17715 tiocmset: kill the file pointer argument
Doing tiocmget was such fun we should do tiocmset as well for the same
reasons

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:52:43 -08:00
Alan Cox
60b33c133c tiocmget: kill off the passing of the struct file
We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:47:33 -08:00
Szymon Janc
138d22ef14 Bluetooth: Fix some code style issues in hci_event.c
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 13:34:50 -03:00
Szymon Janc
01df8c31d1 Bluetooth: Fix some code style issues in hci_core.c
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 13:31:32 -03:00
Szymon Janc
0786f8b777 Bluetooth: Clean up hci_sniff_subrate_evt function
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 11:29:42 -03:00
Szymon Janc
7235975383 Bluetooth: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
As warned by checkpatch.pl, use #include <linux/uaccess.h> instead of
<asm/uaccess.h>.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17 11:28:19 -03:00
Claudio Takahasi
2ce603ebe1 Bluetooth: Send LE Connection Update Command
If the new connection update parameter are accepted, the LE master
host sends the LE Connection Update Command to its controller informing
the new requested parameters.

Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 20:13:21 -03:00
Ville Tervo
6bd32326cd Bluetooth: Use proper timer for hci command timout
Use proper timer instead of hci command flow control to timeout
failed hci commands. Otherwise stack ends up sending commands
when flow control is used to block new commands.

2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000
2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 0
2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6
    bdaddr 00:16:CF:E1:C7:D7

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:26 -03:00
Gustavo F. Padovan
c6f3c5f7f2 Bluetooth: Fix crash when ioctl(HCIUARTSETPROTO) fails
If the fail happens the HCI del_timer may timeout after the the hci dev
unregister. This lead to a kernel crash.

Reported-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:24 -03:00
Claudio Takahasi
de73115a7d Bluetooth: Add connection parameter update response
Implements L2CAP Connection Parameter Update Response defined in
the Bluetooth Core Specification, Volume 3, Part A, section 4.21.
Address the LE Connection Parameter Procedure initiated by the slave.

Connection Interval Minimum and Maximum have the same range: 6 to
3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum.
The Slave Latency field shall have a value in the range of 0 to
((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall
be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms.
Multiplier field shall have a value in the range of 10 to 3200.

Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:24 -03:00
Claudio Takahasi
3300d9a930 Bluetooth: Add LE signaling commands handling
This patch splits the L2CAP command handling function in order to
have a clear separation between the commands related to BR/EDR and
LE. Commands and responses in the LE signaling channel are not being
handled yet, command reject is sent to all received requests. Bluetooth
Core Specification, Volume 3, Part A, section 4 defines the signaling
packets formats and allowed commands/responses over the LE signaling
channel.

Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:23 -03:00
Ville Tervo
bae1f5d946 Bluetooth: Treat LE and ACL links separately on timeout
Separate LE and ACL timeouts. Othervise ACL connections
on non LE hw will time out after 45 secs.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:15 -03:00
Vinicius Costa Gomes
b92a62238f Bluetooth: Fix initiated LE connections
Fix LE connections not being marked as master.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:10 -03:00
Ville Tervo
5589fa9c2d Bluetooth: Do not send disconn comand over LE links
l2cap over LE links can be disconnected without sending
disconnect command first.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:06 -03:00
Ville Tervo
b62f328b8f Bluetooth: Add server socket support for LE connection
Add support for LE server sockets.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:33:02 -03:00
Ville Tervo
acd7d37085 Bluetooth: Add LE connection support to L2CAP
Add basic LE connection support to L2CAP. LE
connection can be created by specifying cid
in struct sockaddr_l2

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16 16:32:55 -03:00