Commit Graph

116 Commits

Author SHA1 Message Date
Thomas Renninger
7ee767b69b cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states
This specific processor supports 3 new package sleep states.
Provide a monitor, so that the user can see their usage.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05 01:52:19 +02:00
Thomas Renninger
2aa1ca75c4 cpupower: Haswell also supports the C-states introduced with SandyBridge
Add Haswell model numbers to snb_register() as it also supports the
C-states introduced in SandyBridge processors.

[rjw: Changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05 01:52:19 +02:00
Thomas Renninger
c4f3610eba cpupower: Introduce idle-set subcommand and C-state enabling/disabling
Example:

cpupower idle-set -d 3

will disable C-state 3 on all processors (set commands are active on
all CPUs by default), same as:

cpupower -c all idle-set -d 3

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05 01:52:19 +02:00
Thomas Renninger
0924c369bc cpupower: Implement disabling of cstate interface
Latest kernel allows to disable C-states via:
/sys/devices/system/cpu/cpuX/cpuidle/stateY/disable

This patch provides lower level sysfs access functions to make use of
this interface.  A later patch will implement the higher level stuff.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05 01:52:19 +02:00
Thomas Renninger
f605181abd cpupower: Make idlestate usage unsigned
Use unsigned int as the data type for some variables related to CPU
idle states which allows the code to be simplified slightly.

[rjw: Changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05 01:52:19 +02:00
Josh Triplett
b844db3187 turbostat: Increase output buffer size to accommodate C8-C10
On platforms with C8-C10 support, the additional C-states cause
turbostat to overrun its output buffer of 128 bytes per CPU.  Increase
this to 256 bytes per CPU.

[ As a bugfix, this should go into 3.10; however, since the C8-C10
  support didn't go in until after 3.9, this need not go into any stable
  kernel. ]

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-13 09:55:56 -07:00
Linus Torvalds
ac4e01093f Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull idle update from Len Brown:
 "Add support for new Haswell-ULT CPU idle power states"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  intel_idle: initial C8, C9, C10 support
  tools/power turbostat: display C8, C9, C10 residency
2013-05-11 15:23:17 -07:00
Linus Torvalds
5d434fcb25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...
2013-04-30 09:36:50 -07:00
Kristen Carlson Accardi
ca58710f3a tools/power turbostat: display C8, C9, C10 residency
Display residency in the new C-states, C8, C9, C10.

C8, C9, C10 are present on some:
"Fourth Generation Intel(R) Core(TM) Processors",
which are based on Intel(R) microarchitecture code name Haswell.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2013-04-17 19:23:26 -04:00
Masanari Iida
1051e9b33b treewide: Fix typos in kernel messages
Correct spelling typos in various part of printk.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-31 17:50:31 +02:00
Len Brown
149c2319c6 tools/power turbostat: additional Haswell CPU-id
There is an additional HSW CPU-id, 0x46,
which has C-states exactly like CPU-id 0x45.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-03-15 11:05:26 -04:00
Rafael J. Wysocki
10baf04e95 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  cpuidle: remove vestage definition of cpuidle_state_usage.driver_data
  x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag
  x86 idle: remove mwait_idle() and "idle=mwait" cmdline param
  ...

Conflicts:
	arch/x86/kernel/process.c (with PM / tracing commit 43720bd)
	drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18 22:34:11 +01:00
Len Brown
1ed51011af tools/power turbostat: display SMI count by default
The SMI counter is popular -- so display it by default
rather than requiring an option.  What the heck,
we've blown the 80 column budget on many systems already...

Note that the value displayed is the delta
during the measurement interval.
The absolute value of the counter can still be seen with
the generic 32-bit MSR option, ie.  -m 0x34

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-13 18:22:12 -05:00
Len Brown
6792041834 tools/power turbostat: decode MSR_IA32_POWER_CTL
When verbose is enabled, print the C1E-Enable
bit in MSR_IA32_POWER_CTL.

also delete some redundant tests on the verbose variable.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:26:16 -05:00
Len Brown
70b43400bc tools/power turbostat: support Haswell
This patch enables turbostat to run properly on the
next-generation Intel(R) Microarchitecture, code named "Haswell" (HSW).

HSW supports the BCLK and counters found in SNB.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:25:57 -05:00
Thomas Renninger
e183fcb344 ACPI tools / acpidump: must be run as root - install it into /usr/sbin
Change the default location to install acpidump into from /usr/bin
to /usr/sbin, as this tool needs to be run as root.

[rjw: Subject and changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-05 23:35:32 +01:00
Linus Torvalds
6842d98de7 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull powertool update from Len Brown:
 "This updates the tree w/ the latest version of turbostat, which
  reports temperature and - on SNB and later - Watts."

Fix up semantic merge conflict as per Len.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools: Allow tools to be installed in a user specified location
  tools/power: turbostat: make Makefile a bit more capable
  tools/power x86_energy_perf_policy: close /proc/stat in for_every_cpu()
  tools/power turbostat: v3.0: monitor Watts and Temperature
  tools/power turbostat: fix output buffering issue
  tools/power turbostat: prevent infinite loop on migration error path
  x86 power: define RAPL MSRs
  tools/power/x86/turbostat: share kernel MSR #defines
2012-12-18 12:34:29 -08:00
Josh Boyer
55f1f545f7 tools: Allow tools to be installed in a user specified location
When building x86_energy_perf_policy or turbostat within the confines of
a packaging system such as RPM, we need to be able to have it install to
the buildroot and not the root filesystem of the build machine.  This
adds a DESTDIR variable that when set will act as a prefix for the
install location of these tools.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30 01:09:45 -05:00
Mark Asselstine
ee0778a301 tools/power: turbostat: make Makefile a bit more capable
The turbostat Makefile is pretty simple, its output is placed in the
same directory as the source, the install rule has no concept of a
prefix or sysroot, and you can set CC to use a specific compiler but
not use the more familiar CROSS_COMPILE. By making a few minor changes
these limitations are removed while leaving the default behavior
matching what it used to be.

Example build with these changes:
make CROSS_COMPILE=i686-wrs-linux-gnu- DESTDIR=/tmp install

or from the tools directory
make CROSS_COMPILE=i686-wrs-linux-gnu- DESTDIR=/tmp turbostat_install

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30 01:09:45 -05:00
Colin Ian King
84764a415c tools/power x86_energy_perf_policy: close /proc/stat in for_every_cpu()
Instead of returning out of for_every_cpu() we should break out of the loop=
 which will then tidy up correctly by closing the file /proc/stat.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30 01:09:44 -05:00
Len Brown
889facbee3 tools/power turbostat: v3.0: monitor Watts and Temperature
Show power in Watts and temperature in Celsius
when hardware support is present.

Intel's Sandy Bridge and Ivy Bridge processor generations support RAPL
(Run-Time-Average-Power-Limiting).  Per the Intel SDM
(Intel® 64 and IA-32 Architectures Software Developer Manual)
RAPL provides hardware energy counters and power control MSRs
(Model Specific Registers).  RAPL MSRs are designed primarily
as a method to implement power capping.  However, they are useful
for monitoring system power whether or not power capping is used.

In addition, Turbostat now shows temperature from DTS
(Digital Thermal Sensor) and PTM (Package Thermal Monitor) hardware,
if present.

As before, turbostat reads MSRs, and never writes MSRs.

New columns are present in turbostat output:

The Pkg_W column shows Watts for each package (socket) in the system.
On multi-socket systems, the system summary on the 1st row shows the sum
for all sockets together.

The Cor_W column shows Watts due to processors cores.
Note that Core_W is included in Pkg_W.

The optional GFX_W column shows Watts due to the graphics "un-core".
Note that GFX_W is included in Pkg_W.

The optional RAM_W column on server processors shows Watts due to DRAM DIMMS.
As DRAM DIMMs are outside the processor package, RAM_W is not included in Pkg_W.

The optional PKG_% and RAM_% columns on server processors shows the % of time
in the measurement interval that RAPL power limiting is in effect on the
package and on DRAM.

Note that the RAPL energy counters have some limitations.

First, hardware updates the counters about once every milli-second.
This is fine for typical turbostat measurement intervals > 1 sec.
However, when turbostat is used to measure events that approach
1ms, the counters are less useful.

Second, the 32-bit energy counters are subject to wrapping.
For example, a counter incrementing 15 micro-Joule units
on a 130 Watt TDP server processor could (in theory)
roll over in about 9 minutes.  Turbostat detects and handles
up to 1 counter overflow per measurement interval.
But when the measurement interval exceeds the guaranteed
counter range, we can't detect if more than 1 overflow occured.
So in this case turbostat indicates that the results are
in question by replacing the fractional part of the Watts
in the output with "**":

Pkg_W  Cor_W GFX_W
  3**    0**   0**

Third, the RAPL counters are energy (Joule) counters -- they sum up
weighted events in the package to estimate energy consumed.  They are
not analong power (Watt) meters.  In practice, they tend to under-count
because they don't cover every possible use of energy in the package.
The accuracy of the RAPL counters will vary between product generations,
and between SKU's in the same product generation, and with temperature.

turbostat's -v (verbose) option now displays more power and thermal configuration
information -- as shown on the turbostat.8 manual page.
For example, it now displays the Package and DRAM Thermal Design Power (TDP):

cpu0: MSR_PKG_POWER_INFO: 0x2f064001980410 (130 W TDP, RAPL 51 - 200 W, 0.045898 sec.)
cpu0: MSR_DRAM_POWER_INFO,: 0x28025800780118 (35 W TDP, RAPL 15 - 75 W, 0.039062 sec.)
cpu8: MSR_PKG_POWER_INFO: 0x2f064001980410 (130 W TDP, RAPL 51 - 200 W, 0.045898 sec.)
cpu8: MSR_DRAM_POWER_INFO,: 0x28025800780118 (35 W TDP, RAPL 15 - 75 W, 0.039062 sec.)

Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30 01:09:44 -05:00
Len Brown
ddac0d6872 tools/power turbostat: fix output buffering issue
In periodic mode, turbostat writes to stdout,
but users were un-able to re-direct stdout, eg.

turbostat > outputfile

would result in an empty outputfile.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30 01:09:43 -05:00
Thomas Renninger
8d219e3658 cpupower: IvyBridge (0x3a and 0x3e models) support
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:20 +01:00
Thomas Renninger
c8cfc3c6bf cpupower: Provide -c param for cpupower monitor to schedule process on all cores
If an MSR based monitor is run in parallel this is not needed. This is the
default case on all/most Intel machines.

But when only sysfs info is read via cpupower monitor -m Idle_Stats (typically
the case for non root users) or when other monitors are PCI based (AMD),
Idle_Stats, read from sysfs can be totally bogus:

cpupower monitor -m Idle_Stats
PKG |CORE|CPU | POLL | C1-N | C3-N | C6-N
   0|   0|   0|  0.00|  0.00|  0.24| 99.81
   0|   0|  32|  0.00|  0.00|  0.00| 100.7
...
   0|  17|  20|  0.00|  0.00|  0.00| 173.1
   0|  17|  52|  0.00|  0.00|  0.07| 173.0
   0|  18|  68|  0.00|  0.00|  0.00|  0.00
   0|  18|  76|  0.00|  0.00|  0.00|  0.00
...

With the -c option all cores are woken up and the kernel
did update cpuidle statistics before reading out sysfs.
This causes some overhead. Therefore avoid if possible, use
if needed:

cpupower monitor -c -m Idle_Stats
PKG |CORE|CPU | POLL | C1-N | C3-N | C6-N
   0|   0|   0|  0.00|  0.00|  0.00| 100.2
   0|   0|  32|  0.00|  0.00|  0.00| 100.2
...
   0|   8|   8|  0.00|  0.00|  0.00| 99.82
   0|   8|  40|  0.00|  0.00|  0.00| 99.81
   0|   9|  24|  0.00|  0.00|  0.00| 100.3
   0|   9|  56|  0.00|  0.00|  0.00| 100.2
   0|  16|   4|  0.00|  0.00|  0.00| 99.75
   0|  16|  36|  0.00|  0.00|  0.00| 99.38
...

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:20 +01:00
Palmer Cox
ea1021ffa6 cpupower tools: Fix warning and a bug with the cpu package count
The pkgs member of cpupower_topology is being used as the number of
cpu packages. As the comment in get_cpu_topology notes, the package ids
are not guaranteed to be contiguous. So, simply setting pkgs to the value
of the highest physical_package_id doesn't actually provide a count of
the number of cpu packages. Instead, calculate pkgs by setting it to
the number of distinct physical_packge_id values which is pretty easy
to do after the core_info structs are sorted. Calculating pkgs this
way also has the nice benefit of getting rid of a sign comparison warning
that GCC 4.6 was reporting.

Signed-off-by: Palmer Cox <p@lmercox.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:19 +01:00
Palmer Cox
35a169737c cpupower tools: Fix malloc of cpu_info structure
The cpu_info member of cpupower_topology was being declared as an unnamed
structure. This member was then being malloced using the size of the
parent cpupower_topology * the number of cpus. This works
because cpu_info is smaller than cpupower_topology. However, there is
no guarantee that will always be the case. Making cpu_info its own
top level structure (named cpuid_core_info) allows for mallocing the actual
size of this structure. This also lets us get rid of a redefinition of
the structure in topology.c with slightly different field names.

Signed-off-by: Palmer Cox <p@lmercox.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:19 +01:00
Palmer Cox
53d2000ebe cpupower tools: Fix issues with sysfs_topology_read_file
Fix a variety of issues with sysfs_topology_read_file:
* The return value of sysfs_topology_read_file function was not properly
  being checked for failure.
* The function was reading int valued sysfs variables and then returning
  their value. So, even if a function was trying to check the return value
  of this function, a caller would not be able to tell an failure code apart
  from reading a negative value. This also conflicted with the comment on the
  function which said that a return value of 0 indicated success.
* The function was parsing int valued sysfs values with strtoul instead of
  strtol.
* The function was non-static even though it was only used in the
  file it was declared in.

Signed-off-by: Palmer Cox <p@lmercox.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:19 +01:00
Palmer Cox
fb8eaeb7ab cpupower tools: Fix minor warnings
Fix minor warnings reported with GCC 4.6:
* The sysfs_write_file function is unused - remove it.
* The pr_mon_len in the print_header function is unsed - remove it.

Signed-off-by: Palmer Cox <p@lmercox.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:18 +01:00
Palmer Cox
275a4dc441 cpupower tools: Update .gitignore for files created in the debug directories
The files generated by the Makefiles in the debug directories aren't listed
in the .gitignore file in the root of the cpupower tool which causes these
files to show up in the output of 'git status'.

Signed-off-by: Palmer Cox <p@lmercox.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:18 +01:00
Palmer Cox
8c00bdfbc7 cpupower tools: Remove brace expansion from clean target
The clean targets from the cpupower tools' Makefiles use brace expansion to
remove some generated files. However, the default shells on many systems do
not support this feature resulting in some generated files not being removed
by clean.

Signed-off-by: Palmer Cox <p@lmercox.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 23:07:18 +01:00
Len Brown
e52966c084 tools/power turbostat: prevent infinite loop on migration error path
Turbostat assumed if it can't migrate to a CPU, then the CPU
must have gone off-line and turbostat should re-initialize
with the new topology.

But if turbostat can not migrate because it is restricted by
a cpuset, then it will fail to migrate even after re-initialization,
resulting in an infinite loop.

Spit out a warning when we can't migrate
and endure only 2 re-initialize cycles in a row
before giving up and exiting.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-27 00:03:06 -05:00
Len Brown
9c63a650bb tools/power/x86/turbostat: share kernel MSR #defines
Now that turbostat is built in the kernel tree,
it can share MSR #defines with the kernel.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
2012-11-23 21:40:04 -05:00
Len Brown
d91bb17c2a tools/power turbostat: graceful fail on garbage input
When invald MSR's are specified on the command line,
turbostat should simply print an error and exit.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-01 00:22:00 -04:00
Len Brown
39300ffb9b tools/power turbostat: Repair Segmentation fault when using -i option
Fix regression caused by commit 8e180f3cb6
(tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter
deltas)

Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-01 00:21:43 -04:00
Wei Yongjun
4084a9b99c tools/power/acpi/acpidump: remove duplicated include from acpidump.c
Remove duplicated include.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-09 00:53:23 -04:00
Linus Torvalds
d43b7167d4 Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
 "Here are two fixes I intended to send after v3.6-rc7, but failed to do
  so.  So please pull them for v3.7-rc1 and they will be picked up by
  stable.

  The first one fixes gcc -x <language> syntax in various build-time
  tests, which icecream and possible other gcc wrappers did not
  understand (and yes, icecream is going to be fixed as well).

  The second one fixes make tar-pkg so that unpacking the tarball does
  not replace the /lib -> /usr/lib symlink on recent Fedora releases."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix gcc -x syntax
  kbuild: Do not package /boot and /lib in make tar-pkg
2012-10-08 07:56:10 +09:00
Len Brown
3f44ea0d1c Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', 'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release
add acpidump utility
intel_idle driver now supports IVB Xeon
turbostat can now count SMIs
ACPI can now bind to USB3 hubs
misc fixes
2012-10-06 16:00:32 -04:00
Len Brown
f9240813e6 tools/power/turbostat: add option to count SMIs, re-name some options
Counting SMIs is popular, so add a dedicated "-s" option to do it,
and juggle some of the other option letters.

-S is now system summary (was -s)
-c is 32 bit counter (was -d)
-C is 64-bit counter (was -D)
-p is 1st thread in core (was -c)
-P is 1st thread in package (was -p)

bump the minor version number

Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-06 15:26:31 -04:00
Jean Delvare
b1e0d8b70f kbuild: Fix gcc -x syntax
The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.

This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.

Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-10-03 09:03:24 +02:00
Len Brown
8e180f3cb6 tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
# turbostat -d 0x34
is useful for printing the number of SMI's within an interval
on Nehalem and newer processors.

where
 # turbostat -m 0x34
will simply print out the total SMI count since reset.

Suggested-by: Andi Kleen
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-27 22:04:56 -04:00
Len Brown
2f32edf12c tools/power turbostat: add [-m MSR#] option
-m MSR# prints the specified MSR in 32-bit format
-M MSR# prints the specified MSR in 64-bit format

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26 18:17:21 -04:00
Len Brown
130ff304f6 tools/power turbostat: make -M output pretty
The -M option dumps the specified 64-bit MSR with every sample.

Previously it was output at the end of each line.
However, with the v2 style of printing, the lines are now staggered,
making MSR output hard to read.

So move the MSR output column to the left where things are aligned.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26 18:17:21 -04:00
Len Brown
6574a5d505 tools/power turbostat: print more turbo-limit information
The "turbo-limit" is the maximum opportunistic processor
speed, assuming no electrical or thermal constraints.
For a given processor, the turbo-limit varies, depending
on the number of active cores.  Generally, there is more
opportunity when fewer cores are active.

Under the "-v" verbose option, turbostat would
print the turbo-limits for the four cases
of 1 to 4 cores active.

Expand that capability to cover the cases of turbo
opportunities with up to 16 cores active.

Note that not all hardware platforms supply this information,
and that sometimes a valid limit may be specified for
a core which is not actually present.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26 18:15:48 -04:00
Len Brown
d7db690165 tools/power turbostat: delete unused line
MSR_TSC is no longer needed because
we now use RDTSC directly.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26 18:11:48 -04:00
Len Brown
1300651b40 tools/power turbostat: run on IVB Xeon
This fix is required to run on IVB Xeon,
which previously had an incorrect cpuid model number listed.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26 18:11:31 -04:00
Len Brown
45e1424be7 tools/power/acpi/acpidump: create acpidump(8), local make install targets
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-25 00:21:04 -04:00
Yakui Zhao
b7e1751278 tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
This is unchanged version 20101221, plus a small bit in
DEFINE_ALTERNATE_TYPES to enable building with latest kernel headers.

This version finds dynamic tables exported by Linux in
/sys/firmware/acpi/tables/dynamic

Signed-off-by: Yakui Zhao <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-25 00:20:40 -04:00
Len Brown
8fa6b970ff Merge branch 'acpidump' into acpica 2012-09-22 23:34:35 -04:00
Len Brown
0e7cc27935 tools/power/acpi/acpidump: create acpidump(8), local make install targets
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 23:32:08 -04:00
Len Brown
d4bb1c90c8 tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
This is unchanged version 20101221, plus a small bit in
DEFINE_ALTERNATE_TYPES to enable building with latest kernel headers.

This version finds dynamic tables exported by Linux in
/sys/firmware/acpi/tables/dynamic

Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 23:09:15 -04:00