Commit Graph

671 Commits

Author SHA1 Message Date
Christoph Lameter
b5637e65ee i386: use page allocator to allocate thread_info structure
i386 uses kmalloc to allocate the threadinfo structure assuming that the
allocations result in a page sized aligned allocation.  That has worked so
far because SLAB exempts page sized slabs from debugging and aligns them in
special ways that goes beyond the restrictions imposed by
KMALLOC_ARCH_MINALIGN valid for other slabs in the kmalloc array.

SLUB also works fine without debugging since page sized allocations neatly
align at page boundaries.  However, if debugging is switched on then SLUB
will extend the slab with debug information.  The resulting slab is not
longer of page size.  It will only be aligned following the requirements
imposed by KMALLOC_ARCH_MINALIGN.  As a result the threadinfo structure may
not be page aligned which makes i386 fail to boot with SLUB debug on.

Replace the calls to kmalloc with calls into the page allocator.

An alternate solution may be to create a custom slab cache where the
alignment is set to PAGE_SIZE.  That would allow slub debugging to be
applied to the threadinfo structure.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:53 -07:00
Zachary Amsden
0013572b2a i386: use pte_update_defer in ptep_test_and_clear_{dirty,young}
If you actually clear the bit, you need to:

+         pte_update_defer(vma->vm_mm, addr, ptep);

The reason is, when updating PTEs, the hypervisor must be notified.  Using
atomic operations to do this is fine for all hypervisors I am aware of.
However, for hypervisors which shadow page tables, if these PTE
modifications are not trapped, you need a post-modification call to fulfill
the update of the shadow page table.

Acked-by: Zachary Amsden <zach@vmware.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:52 -07:00
David Rientjes
10a8d6ae4b i386: add ptep_test_and_clear_{dirty,young}
Add ptep_test_and_clear_{dirty,young} to i386.  They advertise that they
have it and there is at least one place where it needs to be called without
the page table lock: to clear the accessed bit on write to
/proc/pid/clear_refs.

ptep_clear_flush_{dirty,young} are updated to use the new functions.  The
overall net effect to current users of ptep_clear_flush_{dirty,young} is
that we introduce an additional branch.

Cc: Hugh Dickins <hugh@veritas.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:52 -07:00
Linus Torvalds
ea62ccd00f Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05 14:55:20 -07:00
Linus Torvalds
fabb5c4e4a Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6:
  [VOYAGER] add smp alternatives
  [VOYAGER] Use modern techniques to setup and teardown low identiy mappings.
  [VOYAGER] Convert the monitor thread to use the kthread API
  [VOYAGER] clockevents driver: bring voyager in to line
  [VOYAGER] clockevents: correct boot cpu is zero assumption
  [VOYAGER] add smp_call_function_single
2007-05-05 13:30:23 -07:00
Linus Torvalds
89661adaae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits)
  PCI: Free resource files in error path of pci_create_sysfs_dev_files()
  pci-quirks: disable MSI on RS400-200 and RS480
  PCI hotplug: Use menuconfig objects
  PCI: ZT5550 CPCI Hotplug driver fix
  PCI: rpaphp: Remove semaphores
  PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry
  PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically
  PCI: rpaphp: Document is_php_dn()
  PCI: rpaphp: Document find_php_slot()
  PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot()
  PCI: rpaphp: refactor tail call to rpaphp_register_slot()
  PCI: rpaphp: remove rpaphp_set_attention_status()
  PCI: rpaphp: remove print_slot_pci_funcs()
  PCI: rpaphp: Remove setup_pci_slot()
  PCI: rpaphp: remove a call that does nothing but a pointer lookup
  PCI: rpaphp: Remove another wrappered function
  PCI: rpaphp: Remve another call that is a wrapper
  PCI: rpaphp: remove a function that does nothing but wrap debug printks
  PCI: rpaphp: Remove un-needed goto
  PCI: rpaphp: Fix a memleak; slot->location string was never freed
  ...
2007-05-04 18:04:29 -07:00
Linus Torvalds
98b96173c7 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] sworks-agp: Switch to PCI ref counting APIs
  [AGPGART] Nvidia AGP: Use refcount aware PCI interfaces
  [AGPGART] Fix sparse warning in sgi-agp.c
  [AGPGART] Intel-agp adjustments
  [AGPGART] Move [un]map_page_into_agp into asm/agp.h
  [AGPGART] Add missing calls to global_flush_tlb() to ali-agp
  [AGPGART] prevent probe collision of sis-agp and amd64_agp
2007-05-04 17:38:16 -07:00
Jean Delvare
a9dfd281a7 PCI: scatterlist.h needs types.h
Most architectures' scatterlist.h use the type dma_addr_t, but omit to
include <asm/types.h> which defines it.  This could lead to build failures,
so let's add the missing includes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:34 -07:00
Jan Kiszka
c41bf8fa5e [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
There are two callers of __unlazy_fpu, unlazy_fpu and __switch_to, and
none of them appear to require additional preempt_disable/enable here.
Let's open-code save_init_fpu in __unlazy_fpu to save a few ops.

Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Jan Kiszka
02b64dab56 [PATCH] i386: white space fixes in i387.h
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Andi Kleen
c5bcb5635a [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
RDTSCP is already synchronous and doesn't need an explicit CPUID.
This is a little faster and more importantly avoids VMEXITs on Hypervisors.

Original patch from Joerg Roedel, but reworked by AK
Also includes miscompilation fix by Eric Biederman

Cc: "Joerg Roedel" <joerg.roedel@amd.com>

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Andi Kleen
9bccb23dc5 [PATCH] i386: Add X86_FEATURE_RDTSCP
Following x86-64
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
3aefbe0746 [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
Syncs up with x86-64.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
e859dc553c [PATCH] i386: Implement alternative_io for i386
Ported from x86-64.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
3671df8572 [PATCH] i386: Evaluate constant cpu features at runtime
Redefine cpu_has() to evaluate cpu features already checked in early
boot at compile time.  This way the compiler might eliminate some dead code.
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
c7f81c9453 [PATCH] i386: Verify important CPUID bits in real mode
Check some CPUID bits that are needed for compiler generated early in boot.
When the system is still in real mode before changing the VESA BIOS mode
it is possible to still display an visible error message on the screen.

Similar to x86-64.

Includes cleanups from Eric Biederman

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
09198e6850 [PATCH] i386: Clean up NMI watchdog code
- Introduce a wd_ops structure
- Convert the various nmi watchdogs over to it
- This allows to split the perfctr reservation from the watchdog
setup cleanly.
- Do perfctr reservation globally as it should have always been
- Remove dead code referenced only by unused EXPORT_SYMBOLs

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Zachary Amsden
9e5e3162b2 [PATCH] i386: pte simplify ops
Add comment and condense code to make use of native_local_ptep_get_and_clear
function.  Also, it turns out the 2-level and 3-level paging definitions were
identical, so move the common definition into pgtable.h

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:19 +02:00
Zachary Amsden
142dd97591 [PATCH] i386: pte xchg optimization
In situations where page table updates need only be made locally, and there is
no cross-processor A/D bit races involved, we need not use the heavyweight
xchg instruction to atomically fetch and clear page table entries.  Instead,
we can just read and clear them directly.

This introduces a neat optimization for non-SMP kernels; drop the atomic xchg
operations from page table updates.

Thanks to Michel Lespinasse for noting this potential optimization.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:19 +02:00
Zachary Amsden
c2c1accd4b [PATCH] i386: pte clear optimization
When exiting from an address space, no special hypervisor notification of page
table updates needs to occur; direct page table hypervisors, such as Xen,
switch to another address space first (init_mm) and unprotects the page tables
to avoid the cost of trapping to the hypervisor for each pte_clear.  Shadow
mode hypervisors, such as VMI and lhype don't need to do the extra work of
calling through paravirt-ops, and can just directly clear the page table
entries without notifiying the hypervisor, since all the page tables are about
to be freed.

So introduce native_pte_clear functions which bypass any paravirt-ops
notification.  This results in a significant performance win for VMI and
removes some indirect calls from zap_pte_range.

Note the 3-level paging already had a native_pte_clear function, thus
demanding argument conformance and extra args for the 2-level definition.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:19 +02:00
Fernando Luis VazquezCao
f2b218dd61 [PATCH] i386: safe_apic_wait_icr_idle - i386
apic_wait_icr_idle looks like this:

static __inline__ void apic_wait_icr_idle(void)
{
  while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
    cpu_relax();
}

The busy loop in this function would not be problematic if the
corresponding status bit in the ICR were always updated, but that does
not seem to be the case under certain crash scenarios. Kdump uses an IPI
to stop the other CPUs in the event of a crash, but when any of the
other CPUs are locked-up inside the NMI handler the CPU that sends the
IPI will end up looping forever in the ICR check, effectively
hard-locking the whole system.

Quoting from Intel's "MultiProcessor Specification" (Version 1.4), B-3:

"A local APIC unit indicates successful dispatch of an IPI by
resetting the Delivery Status bit in the Interrupt Command
Register (ICR). The operating system polls the delivery status
bit after sending an INIT or STARTUP IPI until the command has
been dispatched.

A period of 20 microseconds should be sufficient for IPI dispatch
to complete under normal operating conditions. If the IPI is not
successfully dispatched, the operating system can abort the
command. Alternatively, the operating system can retry the IPI by
writing the lower 32-bit double word of the ICR. This “time-out”
mechanism can be implemented through an external interrupt, if
interrupts are enabled on the processor, or through execution of
an instruction or time-stamp counter spin loop."

Intel's documentation suggests the implementation of a time-out
mechanism, which, by the way, is already being open-coded in some parts
of the kernel that tinker with ICR.

Create a apic_wait_icr_idle replacement that implements the time-out
mechanism and that can be used to solve the aforementioned problem.

AK: moved both functions out of line
AK: added improved loop from Keith Owens

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:17 +02:00
Bernhard Kaindl
de938c51d5 [PATCH] i386: Enable support for fixed-range IORRs to keep RdMem & WrMem in sync
If our copy of the MTRRs of the BSP has RdMem or WrMem set, and
we are running on an AMD64/K8 system, the boot CPU must have had
MtrrFixDramEn and MtrrFixDramModEn set (otherwise our RDMSR would
have copied these bits cleared), so we set them on this CPU as well.

This allows us to keep the AMD64/K8 RdMem and WrMem bits in sync
across the CPUs of SMP systems in order to fullfill the duty of
system software to "initialize and maintain MTRR consistency
across all processors." as written in the AMD and Intel manuals.

If an WRMSR instruction fails because MtrrFixDramModEn is not
set, I expect that also the Intel-style MTRR bits are not updated.

AK: minor cleanup, moved MSR defines around

Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02 19:27:17 +02:00
Bernhard Kaindl
2b1f6278d7 [PATCH] x86: Save the MTRRs of the BSP before booting an AP
Applied fix by Andew Morton:
http://lkml.org/lkml/2007/4/8/88 - Fix `make headers_check'.

AMD and Intel x86 CPU manuals state that it is the responsibility of
system software to initialize and maintain MTRR consistency across
all processors in Multi-Processing Environments.

Quote from page 188 of the AMD64 System Programming manual (Volume 2):

7.6.5 MTRRs in Multi-Processing Environments

"In multi-processing environments, the MTRRs located in all processors must
characterize memory in the same way. Generally, this means that identical
values are written to the MTRRs used by the processors." (short omission here)
"Failure to do so may result in coherency violations or loss of atomicity.
Processor implementations do not check the MTRR settings in other processors
to ensure consistency. It is the responsibility of system software to
initialize and maintain MTRR consistency across all processors."

Current Linux MTRR code already implements the above in the case that the
BIOS does not properly initialize MTRRs on the secondary processors,
but the case where the fixed-range MTRRs of the boot processor are changed
after Linux started to boot, before the initialsation of a secondary
processor, is not handled yet.

In this case, secondary processors are currently initialized by Linux
with MTRRs which the boot processor had very early, when mtrr_bp_init()
did run, but not with the MTRRs which the boot processor uses at the
time when that secondary processors is actually booted,
causing differing MTRR contents on the secondary processors.

Such situation happens on Acer Ferrari 1000 and 5000 notebooks where the
BIOS enables and sets AMD-specific IORR bits in the fixed-range MTRRs
of the boot processor when it transitions the system into ACPI mode.
The SMI handler of the BIOS does this in SMM, entered while Linux ACPI
code runs acpi_enable().

Other occasions where the SMI handler of the BIOS may change bits in
the MTRRs could occur as well. To initialize newly booted secodary
processors with the fixed-range MTRRs which the boot processor uses
at that time, this patch saves the fixed-range MTRRs of the boot
processor before new secondary processors are started. When the
secondary processors run their Linux initialisation code, their
fixed-range MTRRs will be updated with the saved fixed-range MTRRs.

If CONFIG_MTRR is not set, we define mtrr_save_state
as an empty statement because there is nothing to do.

Possible TODOs:

*) CPU-hotplugging outside of SMP suspend/resume is not yet tested
   with this patch.

*) If, even in this case, an AP never runs i386/do_boot_cpu or x86_64/cpu_up,
   then the calls to mtrr_save_state() could be replaced by calls to
   mtrr_save_fixed_ranges(NULL) and  mtrr_save_state() would not be
   needed.

   That would need either verification of the CPU-hotplug code or
   at least a test on a >2 CPU machine.

*) The MTRRs of other running processors are not yet checked at this
   time but it might be interesting to syncronize the MTTRs of all
   processors before booting. That would be an incremental patch,
   but of rather low priority since there is no machine known so
   far which would require this.

AK: moved prototypes on x86-64 around to fix warnings

Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02 19:27:17 +02:00
Bernhard Kaindl
2b3b4835c9 [PATCH] x86: Adds mtrr_save_fixed_ranges() for use in two later patches.
In this current implementation which is used in other patches,
mtrr_save_fixed_ranges() accepts a dummy void pointer because
in the current implementation of one of these patches, this
function may be called from smp_call_function_single() which
requires that this function takes a void pointer argument.

This function calls get_fixed_ranges(), passing mtrr_state.fixed_ranges
which is the element of the static struct which stores our current
backup of the fixed-range MTRR values which all CPUs shall be
using.

Because  mtrr_save_fixed_ranges calls get_fixed_ranges after
kernel initialisation time, __init needs to be removed from
the declaration of get_fixed_ranges().

If CONFIG_MTRR is not set, we define mtrr_save_fixed_ranges
as an empty statement because there is nothing to do.

AK: Moved prototypes for x86-64 around to fix warnings

Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02 19:27:17 +02:00
Jeremy Fitzhardinge
441d40dca0 [PATCH] x86: PARAVIRT: Jeremy Fitzhardinge <jeremy@goop.org>
The other symbols used to delineate the alt-instructions sections have the
form __foo/__foo_end.  Rename parainstructions to match.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:16 +02:00
Zachary Amsden
e0bb864397 [PATCH] i386: Convert VMI timer to use clock events
Convert VMI timer to use clock events, making it properly able to use the NO_HZ
infrastructure.  On UP systems, with no local APIC, we just continue to route
these events through the PIT.  On systems with a local APIC, or SMP, we provide
a single source interrupt chip which creates the local timer IRQ.  It actually
gets delivered by the APIC hardware, but we don't want to use the same local
APIC clocksource processing, so we create our own handler here.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
CC: Dan Hecht <dhecht@vmware.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
57decbda6a [PATCH] x86: update for i386 and x86-64 check_bugs
Remove spurious comments, headers and keywords from x86-64 bugs.[ch].

Use identify_boot_cpu()

AK: merged with other patch

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
c5413fbe89 [PATCH] i386: Fix UP gdt bugs
Fixes two problems with the GDT when compiling for uniprocessor:
 - There's no percpu segment, so trying to load its selector into %fs fails.
   Use a null selector instead.
 - The real gdt needs to be loaded at some point.  Do it in cpu_init().

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
1956c73bb5 [PATCH] i386: Define per_cpu_offset
Define per_cpu_offset in asm-i386/percpu.h when SMP defined, like
asm-generic/percpu.h does for UP.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
978c038ec9 [PATCH] i386: cleanups to help using per-cpu variables from asm
This patch does a few small cleanups:
 - use PER_CPU_NAME to generate the names of per-cpu variables
 - use lea to add the per_cpu offset in PER_CPU(), because it doesn't
   affect condition flags
 - add PER_CPU_VAR which allows direct access to pre-cpu variables
   with the %fs: prefix on SMP.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
7c3576d261 [PATCH] i386: Convert PDA into the percpu section
Currently x86 (similar to x84-64) has a special per-cpu structure
called "i386_pda" which can be easily and efficiently referenced via
the %fs register.  An ELF section is more flexible than a structure,
allowing any piece of code to use this area.  Indeed, such a section
already exists: the per-cpu area.

So this patch:
(1) Removes the PDA and uses per-cpu variables for each current member.
(2) Replaces the __KERNEL_PDA segment with __KERNEL_PERCPU.
(3) Creates a per-cpu mirror of __per_cpu_offset called this_cpu_off, which
    can be used to calculate addresses for this CPU's variables.
(4) Simplifies startup, because %fs doesn't need to be loaded with a
    special segment at early boot; it can be deferred until the first
    percpu area is allocated (or never for UP).

The result is less code and one less x86-specific concept.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
7a61d35d4b [PATCH] i386: Page-align the GDT
Xen wants a dedicated page for the GDT.  I believe VMI likes it too.
lguest, KVM and native don't care.

Simple transformation to page-aligned "struct gdt_page".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
4cdd9c8931 [PATCH] i386: PARAVIRT: drop unused ptep_get_and_clear
In shadow mode hypervisors, ptep_get_and_clear achieves the desired
purpose of keeping the shadows in sync by issuing a native_get_and_clear,
followed by a call to pte_update, which indicates the PTE has been
modified.

Direct mode hypervisors (Xen) have no need for this anyway, and will trap
the update using writable pagetables.

This means no hypervisor makes use of ptep_get_and_clear; there is no
reason to have it in the paravirt-ops structure.  Change confusing
terminology about raw vs. native functions into consistent use of
native_pte_xxx for operations which do not invoke paravirt-ops.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
1a45b7aaa5 [PATCH] i386: PARAVIRT: Clean up paravirt patchable wrappers
Replace all the open-coded macros for generating calls with a pair of
more general macros (__PVOP_CALL/VCALL), and redefine all the
PVOP_V?CALL[0-4] in terms of them.

[ Andrew, Andi: this should slot in immediately after "Document asm-i386/paravirt.h"
  (paravirt_ops-document-asm-i386-paravirth.patch) ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
4e0fa85602 [PATCH] i386: PARAVIRT: Use enums for paravirt lazy flush modi
Remove #defines, add enum for PARAVIRT_LAZY_FLUSH.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
ce6234b529 [PATCH] i386: PARAVIRT: add kmap_atomic_pte for mapping highpte pages
Xen and VMI both have special requirements when mapping a highmem pte
page into the kernel address space.  These can be dealt with by adding
a new kmap_atomic_pte() function for mapping highptes, and hooking it
into the paravirt_ops infrastructure.

Xen specifically wants to map the pte page RO, so this patch exposes a
helper function, kmap_atomic_prot, which maps the page with the
specified page protections.

This also adds a kmap_flush_unused() function to clear out the cached
kmap mappings.  Xen needs this to clear out any potential stray RW
mappings of pages which will become part of a pagetable.

[ Zach - vmi.c will need some attention after this patch.  It wasn't
  immediately obvious to me what needs to be done. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
a27fe809b8 [PATCH] i386: PARAVIRT: revert map_pt_hook.
Back out the map_pt_hook to clear the way for kmap_atomic_pte.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
d4c104771a [PATCH] i386: PARAVIRT: add flush_tlb_others paravirt_op
This patch adds a pv_op for flush_tlb_others.  Linux running on native
hardware uses cross-CPU IPIs to flush the TLB on any CPU which may
have a particular mm's pagetable entries cached in its TLB.  This is
inefficient in a paravirtualized environment, since the hypervisor
knows which real CPUs actually contain cached mappings, which may be a
small subset of a guest's VCPUs.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
63f70270cc [PATCH] i386: PARAVIRT: add common patching machinery
Implement the actual patching machinery.  paravirt_patch_default()
contains the logic to automatically patch a callsite based on a few
simple rules:

 - if the paravirt_op function is paravirt_nop, then patch nops
 - if the paravirt_op function is a jmp target, then jmp to it
 - if the paravirt_op function is callable and doesn't clobber too much
    for the callsite, call it directly

paravirt_patch_default is suitable as a default implementation of
paravirt_ops.patch, will remove most of the expensive indirect calls
in favour of either a direct call or a pile of nops.

Backends may implement their own patcher, however.  There are several
helper functions to help with this:

paravirt_patch_nop	nop out a callsite
paravirt_patch_ignore	leave the callsite as-is
paravirt_patch_call	patch a call if the caller and callee
			have compatible clobbers
paravirt_patch_jmp	patch in a jmp
paravirt_patch_insns	patch some literal instructions over
			the callsite, if they fit

This patch also implements more direct patches for the native case, so
that when running on native hardware many common operations are
implemented inline.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
294688c028 [PATCH] i386: PARAVIRT: Document asm-i386/paravirt.h
Clean things up, and broadly document:
 - the paravirt_ops functions themselves
 - the patching mechanism

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
f8822f4201 [PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
Wrap a set of interesting paravirt_ops calls in a wrapper which makes
the callsites available for patching.  Unfortunately this is pretty
ugly because there's no way to get gcc to generate a function call,
but also wrap just the callsite itself with the necessary labels.

This patch supports functions with 0-4 arguments, and either void or
returning a value.  64-bit arguments must be split into a pair of
32-bit arguments (lower word first).  Small structures are returned in
registers.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
42c24fa22e [PATCH] i386: PARAVIRT: Fix patch site clobbers to include return register
Fix a few clobbers to include the return register.  The clobbers set
is the set of all registers modified (or may be modified) by the code
snippet, regardless of whether it was deliberate or accidental.

Also, make sure that callsites which are used in contexts which don't
allow clobbers actually save and restore all clobberable registers.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
d582203578 [PATCH] i386: PARAVIRT: Use patch site IDs computed from offset in paravirt_ops structure
Use patch type identifiers derived from the offset of the operation in
the paravirt_ops structure.  This avoids having to maintain a separate
enum for patch site types.

Also, since the identifier is derived from the offset into
paravirt_ops, the offset can be derived from the identifier.  This is
used to remove replicated information in the various callsite macros,
which has been a source of bugs in the past.

This patch also drops the fused save_fl+cli operation, which doesn't
really add much and makes things more complex - specifically because
it breaks the 1:1 relationship between identifiers and offsets.  If
this operation turns out to be particularly beneficial, then the right
answer is to define a new entrypoint for it.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
98de032b68 [PATCH] i386: PARAVIRT: rename struct paravirt_patch to paravirt_patch_site for clarity
Rename struct paravirt_patch to paravirt_patch_site, so that it
clearly refers to a callsite, and not the patch which may be applied
to that callsite.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
d6dd61c831 [PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destruction
Add hooks to allow a paravirt implementation to track the lifetime of
an mm.  Paravirtualization requires three hooks, but only two are
needed in common code.  They are:

arch_dup_mmap, which is called when a new mmap is created at fork

arch_exit_mmap, which is called when the last process reference to an
  mm is dropped, which typically happens on exit and exec.

The third hook is activate_mm, which is called from the arch-specific
activate_mm() macro/function, and so doesn't need stub versions for
other architectures.  It's called when an mm is first used.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: linux-arch@vger.kernel.org
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
5311ab62cd [PATCH] i386: PARAVIRT: Allow paravirt backend to choose kernel PMD sharing
Normally when running in PAE mode, the 4th PMD maps the kernel address space,
which can be shared among all processes (since they all need the same kernel
mappings).

Xen, however, does not allow guests to have the kernel pmd shared between page
tables, so parameterize pgtable.c to allow both modes of operation.

There are several side-effects of this.  One is that vmalloc will update the
kernel address space mappings, and those updates need to be propagated into
all processes if the kernel mappings are not intrinsically shared.  In the
non-PAE case, this is done by maintaining a pgd_list of all processes; this
list is used when all process pagetables must be updated.  pgd_list is
threaded via otherwise unused entries in the page structure for the pgd, which
means that the pgd must be page-sized for this to work.

Normally the PAE pgd is only 4x64 byte entries large, but Xen requires the PAE
pgd to page aligned anyway, so this patch forces the pgd to be page
aligned+sized when the kernel pmd is unshared, to accomodate both these
requirements.

Also, since there may be several distinct kernel pmds (if the user/kernel
split is below 3G), there's no point in allocating them from a slab cache;
they're just allocated with get_free_page and initialized appropriately.  (Of
course the could be cached if there is just a single kernel pmd - which is the
default with a 3G user/kernel split - but it doesn't seem worthwhile to add
yet another case into this code).

[ Many thanks to wli for review comments. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Christoph Lameter <clameter@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
90caccb975 [PATCH] i386: PARAVIRT: Allocate a fixmap slot
Allocate a fixmap slot for use by a paravirt_ops implementation.  This
is intended for early-boot bootstrap mappings.  Once the zones and
allocator have been set up, it would be better to use get_vm_area() to
allocate some virtual space.

Xen uses this to map the hypervisor's shared info page, which doesn't
have a pseudo-physical page number, and therefore can't be mapped
ordinarily.  It is needed early because it contains the vcpu state,
including the interrupt mask.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
b239fb2501 [PATCH] i386: PARAVIRT: Hooks to set up initial pagetable
This patch introduces paravirt_ops hooks to control how the kernel's
initial pagetable is set up.

In the case of a native boot, the very early bootstrap code creates a
simple non-PAE pagetable to map the kernel and physical memory.  When
the VM subsystem is initialized, it creates a proper pagetable which
respects the PAE mode, large pages, etc.

When booting under a hypervisor, there are many possibilities for what
paging environment the hypervisor establishes for the guest kernel, so
the constructon of the kernel's pagetable depends on the hypervisor.

In the case of Xen, the hypervisor boots the kernel with a fully
constructed pagetable, which is already using PAE if necessary.  Also,
Xen requires particular care when constructing pagetables to make sure
all pagetables are always mapped read-only.

In order to make this easier, kernel's initial pagetable construction
has been changed to only allocate and initialize a pagetable page if
there's no page already present in the pagetable.  This allows the Xen
paravirt backend to make a copy of the hypervisor-provided pagetable,
allowing the kernel to establish any more mappings it needs while
keeping the existing ones.

A slightly subtle point which is worth highlighting here is that Xen
requires all kernel mappings to share the same pte_t pages between all
pagetables, so that updating a kernel page's mapping in one pagetable
is reflected in all other pagetables.  This makes it possible to
allocate a page and attach it to a pagetable without having to
explicitly enumerate that page's mapping in all pagetables.

And:

+From: "Eric W. Biederman" <ebiederm@xmission.com>

If we don't set the leaf page table entries it is quite possible that
will inherit and incorrect page table entry from the initial boot
page table setup in head.S.  So we need to redo the effort here,
so we pick up PSE, PGE and the like.

Hypervisors like Xen require that their page tables be read-only,
which is slightly incompatible with our low identity mappings, however
I discussed this with Jeremy he has modified the Xen early set_pte
function to avoid problems in this area.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: William Irwin <bill.irwin@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
3dc494e86d [PATCH] i386: PARAVIRT: Add pagetable accessors to pack and unpack pagetable entries
Add a set of accessors to pack, unpack and modify page table entries
(at all levels).  This allows a paravirt implementation to control the
contents of pgd/pmd/pte entries.  For example, Xen uses this to
convert the (pseudo-)physical address into a machine address when
populating a pagetable entry, and converting back to pphys address
when an entry is read.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
4587623360 [PATCH] i386: PARAVIRT: use paravirt_nop to consistently mark no-op operations
Add a _paravirt_nop function for use as a stub for no-op operations,
and paravirt_nop #defined void * version to make using it easier
(since all its uses are as a void *).

This is useful to allow the patcher to automatically identify noop
operations so it can simply nop out the callsite.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
[mingo] but only as a cleanup of the current open-coded (void *) casts.
My problem with this is that it loses the types. Not that there is much
to check for, but still, this adds some assumptions about how function
calls look like
2007-05-02 19:27:13 +02:00