Commit Graph

1310 Commits

Author SHA1 Message Date
Anton Blanchard
059e277e5b [PATCH] ppc64: silence perfmon exception warnings
We dont need to use the PERFMON exception on POWER5, in fact the firmware
returns an error.  Due to this just remove the warning.

Also now that we have proper runlatch support we can remove the bootup
hack.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:42 -07:00
Michael Ellerman
b6bff397ea [PATCH] ppc64: Be consistent about printing which idle loop we're using
Not sure if we really need this, but it was handy to know which iSeries loop I
was testing.

Be consistent about printing which idle loop we're using, with this patch we
cover all cases.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:42 -07:00
Anton Blanchard
10ca1e1ed5 [PATCH] ppc64: fix compile warning
Fix a compile warning introduced by the previous patches.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Anton Blanchard
45e75dfb60 [PATCH] ppc64: idle fixups
- remove some unnecessary includes
- add runlatch support
- no need to use raw_smp_processor_id any more, current preempt debug
  logic checks for processes that are bound to one cpu.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Anton Blanchard
050a09389e [PATCH] ppc64: pSeries idle fixups
- separate out sleep logic in dedicated_idle, it was so far indented
  that it got squashed against the right side of the screen.
- add runlatch support, looping on runlatch disable.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Anton Blanchard
3c57bb9f45 [PATCH] ppc64: iSeries idle fixups
- remove min/max yield time, we dont use the values anywhere
- separate shared and dedicated idle loops
- check need_resched again with irqs off to avoid sleeping with pending work
- continually set runlatch off in idle loop, this means we dont need to
  turn the runlatch off on exception exit and suffer that associated
  cost for all exceptions. (A future patch will turn the runlatch on at
  exception entry)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
08d5e3eb4b [PATCH] ppc64: Remove obsolete idle_setup()
Now that the idle loop is configured by each platform we don't need
idle_setup() anymore.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
62d60e9f0f [PATCH] ppc64: Fixup platforms for new ppc_md.idle
This patch fixes up iSeries, pSeries, pmac and maple to set the correct idle
function for each platform.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
c66d5dd6b5 [PATCH] ppc64: Move pSeries idle functions into pSeries_setup.c
dedicated_idle() and shared_idle() are only used by pSeries, so move them into
pSeries_setup.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
d200903e11 [PATCH] ppc64: Move iSeries_idle() into iSeries_setup.c
Move iSeries_idle() into iSeries_setup.c, no one else needs to know about it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:40 -07:00
Michael Ellerman
fd899c0cc7 [PATCH] ppc64: Make idle_loop a ppc_md function
This patch adds an idle member to the ppc_md structure and calls it from
cpu_idle().  If a platform leaves ppc_md.idle as null it will get the default
idle loop default_idle().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:40 -07:00
Milton Miller
70b234a401 [PATCH] hvc_console: Separate the NUL character filtering from get_hvc_chars
Separate the NUL character filtering from get_hvc_chars.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:40 -07:00
Milton Miller
acad9559f1 [PATCH] hvc_console: Separate hvc_console and vio code 2
Remove all the vio device driver code from hvc_console.c

This will allow us to separate hvsi, hvc, and allow hvc_console to be used
without the ppc64 vio layer.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:39 -07:00
Milton Miller
d5ee257c33 [PATCH] hvc_console: Separate hvc_console and vio code
Separate the console setup routines of the hvc_console and the vio layer.

Remove the call to find_init_vty from hvc_console.c.

Fail the setup routine if the console doesn't exist, but register the console
again when the specified channel is instantiated.  This scheme maintains the
print buffer semantics while eliminating callout and call back for the console
code.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:39 -07:00
Anton Blanchard
79c2cc7b6d [PATCH] ppc64: add ioprio syscalls
- Clean up sys32_getpriority comment.
- Add ioprio syscalls, and sign extend 32bit versions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
4416f3968a [PATCH] ppc64: sys_ppc32.c cleanups
Remove some unnecessary includes, an out of date comment and a prototype for
sys_timer_create (which is now in syscalls.h)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
8dc4fd87f2 [PATCH] ppc64: Turn runlatch on in exception entry
Enable the runlatch at the start of each exception.  Unfortunately we are out
of space in the 0x300 handler, so I added it a bit later.

The SPR write is fairly expensive, perhaps we should cache the runlatch state
in the paca and avoid the write when possible.

We don't need to turn the runlatch off, we do that in the idle loop.  Better
to take the hit in the idle loop than for each exception exit.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
a2f7a9ce2a [PATCH] ppc64: Fix runlatch code to work on pseries machines
Not all ppc64 CPUs have the CTRL SPR, so we need a cputable feature for it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
315a699851 [PATCH] ppc64: use c99 initialisers in cputable code
Use c99 initialisers in the cputable code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:36 -07:00
Olaf Hering
2098eec228 [PATCH] ppc64: vdso32: fix link errors after recent toolchain changes
Patch from <amodra@bigpond.net.au>,
http://sources.redhat.com/bugzilla/show_bug.cgi?id=1042

/usr/bin/ld: arch/ppc64/kernel/vdso32/vdso32.so: The first section in the
PT_DYNAMIC segment is not the .dynamic section

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:36 -07:00
Andrew Morton
c23a4e9649 [PATCH] iounmap debugging
We get sporadic reports of `__iounmap: bad address' coming out.  Add a
dump_stack() to find the culprit.

Try to identify which subsystem is having iounmap() problems.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:35 -07:00
Jeff Dike
eda8022886 [PATCH] uml: kill some useless vmalloc tlb flushing
There is absolutely no reason to flush the kernel's VM area during a
tlb_flush_mm.

This results in a noticable performance increase in the kernel build
benchmark.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:35 -07:00
Linus Torvalds
043d051615 Merge master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 2005-07-07 10:24:51 -07:00
Jack Steiner
21517a57e8 [IA64] - Disable tiocx driver on non-SN systems
Disable the tiocx driver on non-SN systems.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-07 09:52:59 -07:00
Linus Torvalds
c101f3136c Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-07-06 22:15:13 -07:00
Tony Luck
8d7e35174d [IA64] fix generic/up builds
Jesse Barnes provided the original version of this patch months ago, but
other changes kept conflicting with it, so it got deferred.  Greg Edwards
dug it out of obscurity just over a week ago, and almost immediately
another conflicting patch appeared (Bob Picco's memory-less nodes).

I've resolved the conflicts and got it running again.  CONFIG_SGI_TIOCX
is set to "y" in defconfig, which causes a Tiger to not boot (oops in
tiocx_init).  But that can be resolved later ... get this in now before it
gets stale again.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 18:18:10 -07:00
Linus Torvalds
359ea2f135 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 2005-07-06 17:04:06 -07:00
bob.picco
564601a5d1 [IA64] memory-less-nodes repost
I reworked how nodes with only CPUs are treated.  The patch below seems
simpler to me and has eliminated the complicated routine
reassign_cpu_only_nodes.  There isn't any longer the requirement
to modify ACPI NUMA information which was in large part the
complexity introduced in reassign_cpu_only_nodes. 

This patch will produce a different number of nodes. For example,
reassign_cpu_only_nodes would reduce two CPUonly nodes and one memory node
configuration to one memory+CPUs node configuration.  This patch
doesn't change the number of nodes which means the user will see three.  Two
nodes without memory and one node with all the memory.

While doing this patch, I noticed that early_nr_phys_cpus_node isn't serving
any useful purpose.  It is called once in find_pernode_space but the value
isn't used to computer pernode space.  

Signed-off-by: bob.picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:45:30 -07:00
af25e94d4d [IA64] Make ia64 die() preempt safe
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:44:55 -07:00
Eddie C. Dost
12cf649f41 [SPARC64]: Fix set_intr_affinity()
Do not cat bucket->irq_info to struct irqaction * directly,
but go through struct irq_desc *.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 15:40:21 -07:00
Linus Torvalds
107177410b Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-07-06 15:39:15 -07:00
Tony Luck
67d340f440 Auto merge with /home/aegl/GIT/linus 2005-07-06 15:35:18 -07:00
Keith Owens
2ba3e3e65c [IA64] restore_sigcontext is not preempt safe
restore_sigcontext calls ia64_set_local_fpu_owner() which requires that
preempt be disabled.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:31:15 -07:00
Prarit Bhargava
6f354b014b [IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code
This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:53 -07:00
Prarit Bhargava
283c7f6ac6 [IA64] hotplug/ia64: SN Hotplug Driver - new SN PROM version code
This patch is a rewrite of the code to check the PROM version.  The current
code has some deficiences in the way PROM comparisons were made.  The minimum
value of PROM that will boot has also been changed to 4.04.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:13 -07:00
Prarit Bhargava
c13cf3714f [IA64] hotplug/ia64: SN Hotplug Driver: moving of header files
This patch moves header files out of the arch/ia64/sn directories and into
include/asm-ia64/sn.  These files were being included by other subsystems
and should be under include/asm-ia64/sn.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:26:51 -07:00
Deepak Saxena
450008b5a6 [PATCH] ARM: 2792/1: IXP4xx iomap API implementation
Patch from Deepak Saxena

This patch implements the iomap API for Intel IXP4xx NPU systems.
We need to implement our own version of the API functions b/c of the
PCI hostbridge does not provide the capability to map PCI I/O space
into the CPU's physical memory space. In addition, if a system has
more than 64M of PCI memory mapped BARs, PCI memory must also be
accessed indirectly.  This patch changes the assignment of PCI I/O
resources to fall into to 0x0000:0xffff range so that we can trap
I/O areas in our ioread/iowrite macros.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-06 23:06:05 +01:00
Todd Poynor
7bc7fc50ce [PATCH] ARM: 2791/1: Add CRCs for aliased ARM symbols
Patch from Todd Poynor

Fix module versioning for 3 ARM symbols that do not have CRCs added,
avoid "disagrees about version of symbol struct_module" errors at module
load time.  From David Singleton.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-06 23:06:05 +01:00
Stefan Sorensen
bcaafbe4a1 [PATCH] ARM: 2790/1: Properly terminate plat_serial8250_port arrays on ixdp425 and
coyote

Patch from Stefan Sorensen

On the ixdp425 and coyote platforms, the plat_serial8250_port arrays are
missing the terminating entry required by serial8250_probe.

Signed-off-by: Stefan Sorensen <ssoe@kirktelecom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-06 23:06:04 +01:00
Catalin Marinas
d1d890edac [PATCH] ARM: 2789/1: Enable access to both CP10 and CP11 on ARMv6
Patch from Catalin Marinas

The VFP instructions trigger undefined exceptions because the access to
CP11 is disabled (only CP10 is currently enabled by the kernel). The patch
fixes this problem.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-06 23:06:03 +01:00
Prarit Bhargava
cb4cb2cb9b [IA64] hotplug/ia64: SN Hotplug Driver: SN IRQ Fixes
This patch  fixes the SN IRQ code such that cpu affinity and
Hotplug can modify IRQ values.  The sn_irq_info structures are now locked
using a RCU lock mechanism to avoid lock contention in the lost interrupt
WAR code.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 14:59:44 -07:00
Andreas Steinmetz
a2a892a236 [CRYPTO] Add x86_64 asm AES
Implementation:
===============
The encrypt/decrypt code is based on an x86 implementation I did a while
ago which I never published. This unpublished implementation does
include an assembler based key schedule and precomputed tables. For
simplicity and best acceptance, however, I took Gladman's in-kernel code
for table generation and key schedule for the kernel port of my
assembler code and modified this code to produce the key schedule as
required by my assembler implementation. File locations and Kconfig are
kept similar to the i586 AES assembler implementation.
It may seem a little bit strange to use 32 bit I/O and registers in the
assembler implementation but this gives the best code size. My
implementation takes one instruction more per round compared to
Gladman's x86 assembler but it doesn't require any stack for local
variables or saved registers and it is less serialized than Gladman's
code.
Note that all comparisons to Gladman's code were done after my code was
implemented. I did only use FIPS PUB 197 for the implementation so my
implementation is independent work.
If anybody has a better assembler solution for x86_64 I'll be pleased to
have my code replaced with the better solution.

Testing:
========
The implementation passes the in-kernel crypto testing module and I'm
running it without any problems on my laptop where it is mainly used for
dm-crypt.

Microbenchmark:
===============
The microbenchmark was done in userspace with similar compile flags as
used during kernel compile.
Encrypt/decrypt is about 35% faster than the generic C implementation.
As the generic C as well as my assembler implementation are both table
I don't really expect that there is much room for further
improvements though I'll be glad to be corrected here.
The key schedule is about 5% slower than the generic C implementation.
This is due to the fact that some more work has to be done in the key
schedule routine to fit the schedule to the assembler implementation.

Code Size:
==========
Encrypt and decrypt are together about 2.1 Kbytes smaller than the
generic C implementation which is important with regard to L1 cache
usage. The key schedule routine is about 100 bytes larger than the
generic C implementation.

Data Size:
==========
There's no difference in data size requirements between the assembler
implementation and the generic C implementation.

License:
========
Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only
(I'm  not going to change the license for my code). So I had to change
the module license for the x86_64 aes module from 'Dual BSD/GPL' to
'GPL' to reflect the most restrictive license within the module.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 13:55:00 -07:00
Jeff Mahoney
5e6557722e [PATCH] openfirmware: generate device table for userspace
This converts the usage of struct of_match to struct of_device_id,
similar to pci_device_id.  This allows a device table to be generated,
which can be parsed by depmod(8) to generate a map file for module
loading.

In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied.  Those patches are
available at:

 ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06 12:55:20 -07:00
Linus Torvalds
fe0c9f5877 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-07-05 20:37:09 -07:00
David S. Miller
fef43da4e4 [SPARC64]: Fix UltraSPARC-III fallout from membar changes.
The membar changes made the size of __cheetah_flush_tlb_pending
grow by one instruction, but the boot-time code patching was
not updated to match.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05 19:45:24 -07:00
Rusty Lynch
6772926bef [PATCH] kprobes: fix namespace problem and sparc64 build
The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:19:00 -07:00
Eugene Surovegin
4b1294f928 [PATCH] ppc32: explicitly disable 440GP IRQ compatibility mode in 440GX setup
Add explicit disabling of 440GP IRQ compatibility mode when configuring
440GX interrupt controller.  This helps when board firmware for some reason
uses this compatibility mode and leaves it enabled.  It breaks 440GX
interrupt code because it assumes native 440GX IRQ mode.  People seems to
be continuously bitten by this.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:18:59 -07:00
john stultz
f326d22b8c [PATCH] ppc32: stop misusing NTP's time_offset value
As part of my timeofday rework, I've been looking at the NTP code and I
noticed that the PPC architecture is apparently misusing the NTP's
time_offset (it is a terrible name!) value as some form of timezone offset.

This could cause problems when time_offset changed by the NTP code.  This
patch changes the PPC code so it uses a more clear local variable:
timezone_offset.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:18:59 -07:00
Andrei Konovalov
e6b6239f8e [PATCH] ppc32: add Freescale MPC885ADS board support
This patch adds the Freescale MPC86xADS board support.  The supported
devices are SMC UART and 10Mbit ethernet on SCC1.

The manual for the board says that it "is compatible with the MPC8xxFADS
for software point of view".  That's why this patch extends FADS instead of
introducing a new platform.

FEC is not supported as the "combined FCC/FEC ethernet driver" driver by
Pantelis Antoniou should replace the current FEC driver.

Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com>
Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:18:59 -07:00
Linus Torvalds
d06e7a56d9 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-07-05 14:17:40 -07:00
Linus Torvalds
346fced899 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 2005-07-05 11:35:58 -07:00
David S. Miller
864ae18007 [SPARC64]: Fix IRQ retry interval timer value on sparc64 PCI controllers.
Use '5' instead of 'infinity'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 15:58:19 -07:00
David S. Miller
9fba62a59c [SPARC64]: Small Schizo PCI controller programming tweaks.
Use macro instead of magic value for Tomatillo discard-
timeout interrupt enable register bit.

Leave OBP programming PTO value unless Tomatillo and
version >= 0x2.

If no-bus-parking property is present, explicitly clear
PCICTRL_PARK bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 14:53:33 -07:00
David S. Miller
bb6743f4f0 [SPARC64]: Do proper DMA IRQ syncing on Tomatillo
This was the main impetus behind adding the PCI IRQ shim.

In order to properly order DMA writes wrt. interrupts, you have to
write to a PCI controller register, then poll for that bit clearing.
There is one bit for each interrupt source, and setting this register
bit tells Tomatillo to drain all pending DMA from that device.

Furthermore, Tomatillo's with revision less than 4 require us to do a
block store due to some memory transaction ordering issues it has on
JBUS.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 13:26:04 -07:00
David S. Miller
088dd1f81b [SPARC64]: Add support for IRQ pre-handlers.
This allows a PCI controller to shim into IRQ delivery
so that DMA queues can be drained, if necessary.

If some bus specific code needs to run before an IRQ
handler is invoked, the bus driver simply needs to setup
the function pointer in bucket->irq_info->pre_handler and
the two args bucket->irq_info->pre_handler_arg[12].

The Schizo PCI driver is converted over to use a pre-handler
for the DMA write-sync processing it needs when a device
is behind a PCI->PCI bus deeper than the top-level APB
bridges.

While we're here, clean up all of the action allocation
and handling.  Now, we allocate the irqaction as part of
the bucket->irq_info area.  There is an array of 4 irqaction
(for PCI irq sharing) and a bitmask saying which entries
are active.

The bucket->irq_info is allocated at build_irq() time, not
at request_irq() time.  This simplifies request_irq() and
free_irq() tremendously.

The SMP dynamic IRQ retargetting code got removed in this
change too.  It was disabled for a few months now, and we
can resurrect it in the future if we want.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 13:24:38 -07:00
Raphael Assenat
e7270dec08 [SPARC64/COMPAT]: Add some compat ioctl for ppdev
The following patch adds some ioctls to include/linux/compat_ioctl.h
to allow using ppdev from the 32 bit user space on sparc64.

This patch also adds the PPDEV option in the sparc64 menu, near Parallel
printer support in the 'General machine setup' submenu.

All those ioctls seem to be compatible, since (correct me if I'm wrong)
they dont use the 'long' type. See include/linux/ppdev.h.

The application I used to test the new ioctls only used the following:
PPEXCL
PPCLAIM
PPNEGOT
PPGETMODES
PPRCONTROL
PPWCONTROL
PPDATADIR
PPWDATA
PPRDATA

But I beleive that the other ioctls will work fine.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 13:23:45 -07:00
Russell King
68070bdeec [PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers
These didn't match my sed expression correctly, fix them up manually.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-04 10:44:34 +01:00
Russell King
f9bd6ea446 [PATCH] ARM: Change 'param_offset' to 'boot_params'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-04 10:43:36 +01:00
Catalin Marinas
0d670b413f [PATCH] ARM: 2784/1: Fix the block cache flush operation range
Patch from Catalin Marinas

The range for the ARMv6 block cache operations is inclusive but the
kernel doesn't re-calculate the end address, causing a page fault when
used (this only happens with support for cache aliasing, otherwise the
blk_flush_kern_dcache_page() is not called). This patch subtracts
L1_CACHE_BYTES from the end address.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03 17:53:25 +01:00
Russell King
e9dea0c65d [PATCH] ARM: Remove machine description macros
Remove the pointless machine description macros, favouring C99
initialisers instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03 17:38:58 +01:00
Linus Torvalds
86166f9846 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-07-02 10:37:50 -07:00
Greg Kroah-Hartman
7586585897 [PATCH] PCI: clean up dynamic pci id logic
The dynamic pci id logic has been bothering me for a while, and now that
I started to look into how to move some of this to the driver core, I
thought it was time to clean it all up.

It ends up making the code smaller, and easier to follow, and fixes a
few bugs at the same time (dynamic ids were not being matched
everywhere, and so could be missed on some call paths for new devices,
semaphore not needed to be grabbed when adding a new id and calling the
driver core, etc.)

I also renamed the function pci_match_device() to pci_match_id() as
that's what it really does.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01 13:35:50 -07:00
Ivan Kokshaysky
299de0343c [PATCH] PCI: pci_assign_unassigned_resources() on x86
- Add sanity check for io[port,mem]_resource in setup-bus.c. These
  resources look like "free" as they have no parents, but obviously
  we must not touch them.
- In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be
  allocated for some reason, then clear its flags. This prevents any child
  allocations in this range, so the setup-bus code will work with a clean
  resource sub-tree.
- i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks
  only resources 0-5, which looks like a clear bug to me. I suspect it
  might break hotplug as well in some cases.

From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01 13:35:50 -07:00
Ivan Kokshaysky
4a89a04f1e [PATCH] alpha smp fix (part #2)
This fixes the bug that caused BUG_ON(!irqs_disabled()) to trigger in
run_posix_cpu_timers() on alpha/smp.  We didn't disable interrupts
properly before calling smp_percpu_timer_interrupt().

We *do* disable interrupts everywhere except this unfortunate
smp_percpu_timer_interrupt().  Fixed thus.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-01 08:20:23 -07:00
Nishanth Aravamudan
db57955476 [PATCH] ARM: replace schedule_timeout() with msleep()
Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. Neither signals nor wait-queue events are
important at this point in the code, I believe.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01 12:11:51 +01:00
Russell King
c77b042700 [PATCH] ARM: Make the magic values in head.S more obvious
Make the magic address values in head.S more obvious as to where
they came from.  Wrap all debug code in CONFIG_DEBUG_LL.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01 11:56:55 +01:00
Ben Dooks
e695f60454 [PATCH] ARM: 2783/1: Remove omnimeter_defconfig as there is no kernel support
Patch from Ben Dooks

The omnimeter_defconfig does not define any machines and
seems to have no other support in the current kernel.
This patch removes the config file, as this is the only
thing currently mentioning the ominmeter.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01 11:27:06 +01:00
Todd Poynor
26705ca46b [PATCH] ARM: 2781/2: PXA27x Standby mode take 2
Patch from Todd Poynor

Add support for PXA27x Standby mode, a low-power mode that retains CPU
and some peripheral state (the existing "sleep" mode is a power-power
mode that retains less state). Activated via:
echo -n standby > /sys/power/state
From: David Burrage and Todd Poynor

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01 11:27:05 +01:00
Ivan Kokshaysky
eaf05be039 [PATCH] alpha smp fix
As usual, the reason of this breakage is quite silly: in do_entIF, we
are checking for PS == 0 to see whether it was a kernel BUG() or
userspace trap.

It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode
due to non-zero IPL, and the things get messed up horribly then.  In
this particular case it was BUG_ON(!irqs_disabled()) triggered in
run_posix_cpu_timers(), so we ended up shooting "current" with the
bursts of one SIGTRAP and three SIGILLs on every timer tick.  ;-)
2005-06-30 22:29:48 -07:00
Linus Torvalds
62351cc38d Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-06-30 17:07:37 -07:00
Catalin Marinas
abaf48a05a [PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUs
Patch from Catalin Marinas

This patch fixes the V bit setting for the ARM1020x processors. At
reset, this bit is automatically set to the value of the HIVECSINIT
input signal which just happened to be 1 but it is not mandatory.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-30 17:04:14 +01:00
Catalin Marinas
c28a814f25 [PATCH] ARM: 2778/1: Add -mno-thumb-interwork to CFLAGS_ABI
Patch from Catalin Marinas

The new EABI gcc adds -mthumb-interwork by default, even if
-mabi=apcs-gnu is passed. This causes a warning for every compiled C
file when -march=armv4 is used. The patch adds -mno-thumb-interwork
if the option is supported. This is also useful since we don't need
any ARM/Thumb interworking in the kernel

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-30 17:04:14 +01:00
Catalin Marinas
c19cb1df80 [PATCH] ARM: 2777/1: Fix broken comment arch/arm/mm/proc-arm1020.S
Patch from Catalin Marinas

This patch fixes a broken comment in the proc-arm1020.S file which
prevents the file compilation

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-30 17:04:13 +01:00
Linus Torvalds
12829dcb10 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-06-30 08:48:56 -07:00
Chris Zankel
9ec55a9bd3 [PATCH] xtensa: Fix asm macro
Removed dead code in arch/xtensa/kernel/pci.c and use the pci_name() macro.
 Fixed an error in the delay asm macro: '1' is an invalid immediate value.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:11 -07:00
Chris Zankel
e7d163f766 [PATCH] xtensa: Removed local copy of zlib and fixed O= support
Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out).  Some minor
clean-ups in the make files.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:11 -07:00
Chris Zankel
82300bf479 [PATCH] xtensa: Added mm/Kconfig to get a flat memory layout
Added 'mm/Kconfig' to the xtensa Kconfig file to get a flat memory layout.
Fixed a typo in one of the help texts (thanks Geert for pointing it out)

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:10 -07:00
Jesper Juhl
0ee23b50f1 [PATCH] xtensa: use valid_signal()
xtensa should use valid_signal() instead of testing _NSIG directly like
everyone else.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:10 -07:00
Ingo Molnar
306e440daf [PATCH] x86: i8253/i8259A lock cleanup
Introduce proper declarations for i8253_lock and i8259A_lock.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:10 -07:00
Kumar Gala
bcbda35ca7 [PATCH] ppc32: Fix pointer check for MPC8540 ADS device
Editor snafu in which the call to ppc_sys_get_pdata got inside the if check
instead of before it.  Oops.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:09 -07:00
Olaf Hering
ee93b43a05 [PATCH] ppc32: use correct register names in arch/ppc/kernel/relocate_kernel.S
CONFIG_KEXEC=y doesnt work:

arch/ppc/kernel/relocate_kernel.S:37: Error: unsupported relocation against SRR1
arch/ppc/kernel/relocate_kernel.S:39: Error: unsupported relocation against SRR0

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:09 -07:00
Russell King
cfb0810eab [PATCH] ARM: Don't try to send a signal to pid0
If we receive an unrecognised abort during boot, don't try to
send a signal to pid0, but instead report the current state.
This leads to less confusing debug reports.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-30 11:06:49 +01:00
Michael Ellerman
719d1cd867 [PATCH] ppc64: Replace custom locking code with a spinlock
The hvlpevent_queue (formally ItLpQueue) has a member called xInUseWord
which is used for serialising access to the queue. Because it's a word
(ie. 32 bit) there's a custom 32-bit version of test_and_set_bit() or
thereabouts in ItLpQueue.c.

The xInUseWord is not shared with they hypervisor, so we can replace it
with a spinlock and remove the custom code.

There is also another locking mechanism (ItLpQueueInProcess). This is
redundant because it's only manipulated while the lock's held. Remove it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:17:02 +10:00
Michael Ellerman
ffe1b7e14e [PATCH] ppc64: Formatting cleanups in arch/ppc64/kernel/ItLpQueue.c
Just formatting cleanups:
 * rename some "nextLpEvent" variables to just "event"
 * make code fit in 80 columns
 * use brackets around if/else
 * use a temporary to make hvlpevent_clear_valid clearer

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:48 +10:00
Michael Ellerman
38fcdcfe38 [PATCH] ppc64: Cleanup whitespace in arch/ppc64/kernel/ItLpQueue.c
Just cleanup white space.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:28 +10:00
Michael Ellerman
9b0470200a [PATCH] ppc64: Cleanup proc printing of event types
The code that prints event counts by type uses a hand-coded number of tabs
to get the alignment right. Instead use a printf alignment which will allow
allow us to use the event_type strings elsewhere in the future.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:18 +10:00
Michael Ellerman
ed094150bd [PATCH] ppc64: Simplify counting of lpevents, remove lpevent_count from paca
Currently there's a per-cpu count of lpevents processed, a per-queue (ie.
global) total count, and a count by event type.

Replace all that with a count by event for each cpu. We only need to add
it up int the proc code.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:09 +10:00
Michael Ellerman
74889802a1 [PATCH] ppc64: Don't count number of events processed for caller
Currently we count the number of lpevents processed in 3 seperate places.

One of these counters is never read, so just remove it. This means
hvlpevent_queue_process() no longer needs to return the number of events
processed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:15:53 +10:00
Michael Ellerman
937b31b114 [PATCH] ppc64: Rename ItLpQueue_* functions to hvlpevent_queue_*
Now that we've renamed the xItLpQueue structure, rename the functions that
operate on it also.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:15:42 +10:00
Michael Ellerman
a61874648d [PATCH] ppc64: Rename xItLpQueue to hvlpevent_queue
The xItLpQueue is a queue of HvLpEvents that we're given by the Hypervisor.
Rename xItLpQueue to hvlpevent_queue and make the type struct hvlpevent_queue.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:15:32 +10:00
Michael Ellerman
ab354b6379 [PATCH] ppc64: Move definition of xItLpQueue
The xItLpQueue is declared in LparData.c, move it into ItLpQueue.c.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:12:21 +10:00
Michael Ellerman
0f6014b37e [PATCH] ppc64: Make two ItLpQueue related functions static
External parties don't need to use ItLpQueue_getNextLpEvent() or
ItLpQueue_clearValid(), they're internal to ItLpQueue.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:08:56 +10:00
Michael Ellerman
7b01328d45 [PATCH] ppc64: Move xItLpQueue proc code into ItLpQueue.c
Move the code that displays xItLpQueue values in /proc into
ItLpQueue.c.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:08:44 +10:00
Michael Ellerman
512d31d6a8 [PATCH] ppc64: Move initialisation of xItLpQueue into ItLpQueue.c
The xItLpQueue is initalised manually in iSeries_setup_arch().  Move
this code into ItLpQueue.c for a cleaner separation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:08:27 +10:00
Michael Ellerman
1b19bc7214 [PATCH] ppc64: Don't pass the pointers to xItLpQueue around
Because there's only one ItLpQueue and we know where it is, ie. xItLpQueue,
there's no point passing pointers to it it around all over the place.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:57 +10:00
Michael Ellerman
ee48444b85 [PATCH] ppc64: Reorganise the paca initialisation macros
This patch updates the macros that initialise the paca to remove the lpq
parameter. It also rearranges them a bit with the hope of making them a
bit clearer.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:48 +10:00
Michael Ellerman
0c885c175c [PATCH] ppc64: Move set_spread_lpevents() into ItLpQueue.c
The only code outside ItLpQueue.c that refers to spread_lpevents is in
set_apread_lpevents(), so move it inside ItLpQueue.c and make spread_lpevents
static.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:33 +10:00
Michael Ellerman
fc07695386 [PATCH] ppc64: Spread lpevents by default on iSeries
With the previous patch in place, spreading lpevents by default becomes
a one liner.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:21 +10:00
Michael Ellerman
bea248fb30 [PATCH] ppc64: Remove lpqueue pointer from the paca on iSeries
The iSeries code keeps a pointer to the ItLpQueue in its paca struct. But
all these pointers end up pointing to the one place, ie. xItLpQueue.

So remove the pointer from the paca struct and just refer to xItLpQueue
directly where needed.

The only complication is that the spread_lpevents logic was implemented by
having a NULL lpqueue pointer in the paca on CPUs that weren't supposed to
process events. Instead we just compare the spread_lpevents value to the
processor id to get the same behaviour.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:09 +10:00
Linus Torvalds
9b4311eedb Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 2005-06-29 21:03:03 -07:00
Linus Torvalds
0b35ff23b2 Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-06-29 21:00:38 -07:00
Tony Luck
0647d8cfd4 [IA64] Update zx1_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29 16:01:40 -07:00
Tony Luck
06697eea4c [IA64] Update tiger_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29 15:45:41 -07:00
Tony Luck
d18bfacff2 Auto merge with /home/aegl/GIT/linus 2005-06-29 15:21:41 -07:00
Russell King
da41119af7 [PATCH] ARM: Don't force SIGFPE
We were forcing SIGFPE on to a user program for no good reason.
Use send_sig_info() instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 23:02:02 +01:00
Russell King
438a761679 [PATCH] ARM: Fix VFP to use do_div()
VFP used __divdi3 64-bit division needlessly.  Convert it to use
our 64-bit by 32-bit division instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 23:01:02 +01:00
Tony Lindgren
b3402cf50e [PATCH] ARM: 2771/1: Dynamic Tick support for OMAP, take 4
Patch from Tony Lindgren

This patch adds support for Dynamic Tick Timer for OMAP.
This patch is an updated version of ARM patch 2642/1 to
make it work with the already integrated generic ARM
dyntick support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 19:59:48 +01:00
Russell King
026d02a236 [PATCH] Serial: Split 8250 port table (part 2)
Remove legacy ISA serial ports for Accent, Boca, Fourport, Hub6 and MCA
from the architecture specific serial.h include.

The only ports which remain in asm-*/serial.h are the platform specific
entries.  These should really be converted by platform maintainers to
use a platform device, such as can be found in
arch/arm/mach-footbridge/isa.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 18:45:19 +01:00
Russell King
20f720ccce [PATCH] ARM: Remove nmi_tick from integrator platforms
The nmi watchdog code hasn't been merged for this platform yet.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 18:26:19 +01:00
Nicolas Pitre
c7e7887666 [PATCH] ARM: 2723/2: remove __udivdi3 and __umoddi3 from the kernel
Patch from Nicolas Pitre

Those are big, slow and generally not recommended for kernel code.
They are even not present on i386.  So it should be concluded that
one could as well get away with do_div() alone.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 18:10:54 +01:00
Catalin Marinas
aaaa3f9e51 [PATCH] ARM: 2769/1: cpu_init() stack setup fix
Patch from Catalin Marinas

The compiler allocates r14 for the stk variable in the __asm__ directive.
This is a shadowed register and gets changed when the mode is changed,
causing random values in the SP register. The patch adds a clobber for
the r14 register.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 15:34:39 +01:00
Russell King
b720f73296 [PATCH] ARM: Convert ARM timer implementations to use readl/writel
Convert ARMs timer implementations to use readl/writel instead of accessing
the registers via a struct.

People have recently asked if accessing timers via a structure is the
"right way" and its not the Linux way.  So fix this code to conform to
"The Linux Way"(tm).

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2005-06-29 15:15:54 +01:00
Ben Dooks
6904b2465c [PATCH] ARM: 2765/1: S3C24XX - small cleanups in arch/arm/mach-s3c2410
Patch from Ben Dooks

Re-tab the devs.c file, and change the initialiser for the
mach-vr1000.c to use `.xxx = yyy` form.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 11:09:15 +01:00
Ben Dooks
f705b1aed7 [PATCH] ARM: 2764/1: S3C24XX - Common PM functions for Simtec boards
Patch from Ben Dooks

All current S3C24XX implementations from Simtec share the same
requirements for suspend/resume information.
This patch moves the save code out of the mach-bast.c file,
and into it's own so it can be shared by all the current
Simtec S3C24XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 11:09:15 +01:00
Russell King
99a0616bcd Merge with ../linux-2.6-smp 2005-06-29 09:40:28 +01:00
William Lee Irwin III
2668fb91cb [PATCH] sparc32: Kconfig fixups
Something reverted most of the arch/sparc/Kconfig changes, leaving
arch/sparc/ unconfigurable.  This patch re-removes the parts made redundant
by drivers/Kconfig in addition to a mysterious, spurious second instance of
source "mm/Kconfig".  cvs strikes again?

Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:37 -07:00
Alan Cox
200803dfe4 [PATCH] irqpoll
Anyone reporting a stuck IRQ should try these options.  Its effectiveness
varies we've found in the Fedora case.  Quite a few systems with misdescribed
IRQ routing just work when you use irqpoll.  It also fixes up the VIA systems
although thats now fixed with the VIA quirk (which we could just make default
as its what Redmond OS does but Linus didn't like it historically).

A small number of systems have jammed IRQ sources or misdescribes that cause
an IRQ that we have no handler registered anywhere for.  In those cases it
doesn't help.

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:35 -07:00
KAMBAROV, ZAUR
a8f5034540 [PATCH] coverity: i386: build.c: negative return to unsigned fix
Variable "c" was declared as an unsigned int, but used in:

125  		for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
126  			if (write(1, buf, c) != c)
127  				die("Write call failed");

(akpm: read() can return -1.  If it does, we fill the disk up with garbage).

Signed-off-by: Zaur Kambarov <zkambarov@coverity.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:33 -07:00
Linus Torvalds
7e568e62e9 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-06-28 15:00:08 -07:00
Ben Dooks
5027397897 [PATCH] ARM: 2763/1: S3C24XX - mark IRQ_LCD as valid
Patch from Ben Dooks

Fix the IRQ_LCD so that it is marked as valid
since we no longer de-mux this in the main IRQ
handler.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 22:42:06 +01:00
Tony Lindgren
f2be64b3b1 [PATCH] ARM: 2760/1: Add a warning on dynamic tick timekeeping on some platforms
Patch from Tony Lindgren

This patch was suggested by RMK, and adds a warning on the accuracy
of timekeeping when using dynamic tick on some platforms. Depending
on the timer implementation, dynamic tick may affect the accuracy of
timekeeping.
Currently at least OMAP is known to have accurate timekeeping with
dynamic tick.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 21:01:16 +01:00
Richard Purdie
fa0ebff62a [PATCH] ARM: 2761/1: OProfile: Add call graphing support for arm
Patch from Richard Purdie

Add functions to generate backtraces of both kernel and user processes
which allows oprofile's call graphing functionality to be used on arm.
This requires unstripped binaries/libs which use a frame pointer.

Signed-off-by: Richard Purdie
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 21:01:03 +01:00
Peter Chubb
a68db763af [IA64] Fix another IA64 preemption problem
There's another problem shown up by Ingo's recent patch to make
smp_processor_id() complain if it's called with preemption enabled.
local_finish_flush_tlb_mm() calls activate_context() in a situation
where it could be rescheduled to another processor.  This patch
disables preemption around the call.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 10:01:19 -07:00
David Mosberger-Tang
819c67e69c [IA64] Replace stale KDB-code with useful MAGIC_SYSRQ code in simserial.c
Patch makes it possible to use the "F4" function key to do
magic sysrq in the HP Ski simulator.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:58:29 -07:00
Bruce Losure
c1ffb6a8aa [IA64-SGI] Altix patch to tiocx, add subsys_initcall
This patch fixes an ordering issue between the init code for the
tiocx bus driver and tiocx-related device drivers.   Also adds
a new brick to the list of known FPGA bricks.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:53:42 -07:00
Prarit Bhargava
92a582ed27 [IA64] sparse cleanup of TIOCA files
This patch is a sparse compile cleanup of tioca_provider.c, sn_hwperf.h, and
tioca_provider.h.  Each of these files had sparse warnings when
compiled.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:50:48 -07:00
Jack Steiner
71a5d027c9 [IA64-SGI] - new macros for SGI SN simulator
This patch changes some macros that are used when running kernel on the
SGI simulator.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:45:45 -07:00
Prarit Bhargava
8e4641b3ee [IA64] sparse cleanup of shub_mmr.h
This patch is a sparse compile cleanup of shub_mmr.h using both the defconfig
and the sn2_defconfig config files.

The issue with this file was the missing usage of __IA64_UL_CONST wrapper.
This wrapper is defined in include/asm-ia64/types.h and wraps a long
constant definition with UL or with nothing depending on its usage in the
kernel.  The missing wrapper caused many sparse compile errors like

        warning: constant 0x0x0000000010000380 so big it is long

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:37:16 -07:00
David Mosberger-Tang
458f935527 [IA64] Speed up lfetch.fault [NULL]
This patch greatly speeds up the handling of lfetch.fault instructions
which result in NaT consumption. Due to the NaT-page mapped at address
0, this is guaranteed to happen when lfetch.fault'ing a NULL pointer.
With this patch in place, we can even define prefetch()/prefetchw() as
lfetch.fault without significant performance degradation.  More
importantly, it allows compilers to be more aggressive with using
lfetch.fault on pointers that might be NULL.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:28:16 -07:00
Bjorn Helgaas
e15da40176 [IA64] Recognize HP sx2000 chipset
No functional change, just identify the device nicely:

  -IOC: Unknown (103c:12ec) 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
  +IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000

We used to create fake PCI devices for these chips, but we no longer do that.
So I don't think there's any reason to touch pci_ids.h now.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:25:56 -07:00
Mark Maule
a9f9de7378 [IA64-SGI] altix: enable vgacon support
Altix patch to enable use of vgacon driver on that platform.  Depends on the
PCDP generalization patch discussed at:

	http://marc.theaimsgroup.com/?l=linux-ia64&m=111446235101939&w=2

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:23:04 -07:00
Mark Maule
66b7f8a304 [IA64-SGI] pcdp: add PCDP pci interface support
Resend 2 with changes per Bjorn Helgaas comments.  Changes from original:

+ Change globals to vga_console_iobase/vga_console_membase and make them
  unconditional.
+ Address style-related comments.

Patch to extend the PCDP vga setup code to support PCI io/mem translations
for the legacy vga ioport and ram spaces on architectures (e.g. altix) which
need them.

Summary of the changes:

drivers/firmware/pcdp.c
drivers/firmware/pcdp.h
-----------------------
+ add declaration for the spec-defined PCI interface struct (pcdp_if_pci)
  as well as support macros.

+ extend setup_vga_console() to know about pcdp_if_pci and add a couple of
  globals to hold the io and mem translation offsets if present.

arch/ia64/kernel/setup.c
------------------------
+ tweek early_console_setup() to allow multiple early console setup routines
  to be called.

include/asm-ia64/vga.h
----------------------
+ make VGA_MAP_MEM vga_console_membase aware

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:09:06 -07:00
Tony Luck
54522b6613 Auto merge with /home/aegl/GIT/ia64-test 2005-06-28 08:24:49 -07:00
Russell King
4b0ef3b112 [PATCH] ARM SMP: Add IPI support code for SMP TLB flushing
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 13:49:16 +01:00
Russell King
564c90aa07 [PATCH] ARM SMP: Use local_flush_tlb* where we really want to be local
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 13:46:09 +01:00
Olaf Hering
b1bdfbd0a2 [PATCH] remove duplicate printf in arch/ppc64/boot/main.c
initrd size is printed as hex, add a missing 0x
remove a duplicate printf when initrd is used.
remove use of kernel type to access the first bytes of the initrd memarea.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:46 +10:00
Olaf Hering
e6019db5a7 [PATCH] remove printk usage in arch/ppc64/boot/prom.c
remove the printk usage in the zImage. we are not there, yet.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:35 +10:00
Olaf Hering
a58dfbbb2a [PATCH] remove unused arch/ppc64/boot/mknote.c
mknote is not called in arch/ppc64/boot/Makefile

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:28 +10:00
Olaf Hering
45891f7660 [PATCH] remove unused arch/ppc64/boot/piggyback.c
piggyback is not called in arch/ppc64/boot/Makefile

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:21 +10:00
Nathan Lynch
f5f1cc5437 [PATCH] ppc64: don't create spurious symlinks under node0 sysdev
On partitioned systems we can wind up creating spurious symlinks in
/sys/devices/system/node/node0 to non-present cpus.  The symlinks are
not broken; the problem is that we're potentially misinforming
userspace that there is a relationship between node0 and cpus which
are to be added later.  There's no guarantee at all that a cpu which
is added later will belong to node 0.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 20:55:25 +10:00
Arnd Bergmann
a341ad9724 [PATCH] ppc64: simplify nvram partition scanning code
Convert nvram_create_os_partition to use list_for_each_entry
instead of list_for_each, as this reduces the code size by
two lines.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 20:33:49 +10:00
Greg KH
8644d2a42b Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-27 22:07:56 -07:00
Greg Kroah-Hartman
1cde8a1681 [PATCH] PCI: use the MCFG table to properly access pci devices (x86-64)
Now that we have access to the whole MCFG table, let's properly use it
for all pci device accesses (as that's what it is there for, some boxes
don't put all the busses into one entry.)

If, for some reason, the table is incorrect, we fallback to the "old
style" of mmconfig accesses, namely, we just assume the first entry in
the table is the one for us, and blindly use it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:48 -07:00
Greg Kroah-Hartman
d57e26ceb7 [PATCH] PCI: use the MCFG table to properly access pci devices (i386)
Now that we have access to the whole MCFG table, let's properly use it
for all pci device accesses (as that's what it is there for, some boxes
don't put all the busses into one entry.)

If, for some reason, the table is incorrect, we fallback to the "old
style" of mmconfig accesses, namely, we just assume the first entry in
the table is the one for us, and blindly use it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:47 -07:00
Greg Kroah-Hartman
545493917d [PATCH] PCI: add proper MCFG table parsing to ACPI core.
This patch is the first step in properly handling the MCFG PCI table.
It defines the structures properly, and saves off the table so that the
pci mmconfig code can access it.  It moves the parsing of the table a
little later in the boot process, but still before the information is
needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:47 -07:00
Michael Ellerman
2311b1f2bb [PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch
This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch
which is in 2.6.12-rc4-mm1.

It fixes the patch to work on PPC iSeries, removes some debug printks
at Ben's request, and incorporates your
fix-pci-mmap-on-ppc-and-ppc64-fix.patch also.

Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch was discussed at length on linux-pci and so far, the last
iteration of it didn't raise any comment.  It's effect is a nop on
architecture that don't define the new pci_resource_to_user() callback
anyway.  It allows architecture like ppc who put weird things inside of
PCI resource structures to convert to some different value for user
visible ones.  It also fixes mmap'ing of IO space on those archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:45 -07:00
Kenji Kaneshige
0e888adc41 [PATCH] ACPI based I/O APIC hot-plug: ia64 support
This is an ia64 implementation of acpi_register_ioapic() and
acpi_unregister_ioapic() interfaces.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:44 -07:00
Kenji Kaneshige
b1bb248a5d [PATCH] ACPI based I/O APIC hot-plug: add interfaces
This patch adds the following new interfaces for I/O xAPIC
hotplug. The implementation of these interfaces depends on each
architecture.

    o int acpi_register_ioapic(acpi_handle handle, u64 phys_addr,
			       u32 gsi_base);

        This new interface is to add a new I/O xAPIC specified by
        phys_addr and gsi_base pair. phys_addr is the physical address
        to which the I/O xAPIC is mapped and gsi_base is global system
        interrupt base of the I/O xAPIC. acpi_register_ioapic returns
        0 on success, or negative value on error.

    o int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);

        This new interface is to remove a I/O xAPIC specified by
        gsi_base. acpi_unregister_ioapic returns 0 on success, or
        negative value on error.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:44 -07:00
Rajesh Shah
f7d473d919 [PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus
Read bridge io/mem/pfmem ranges when fixing up the bus so that bus resources
are tracked.  This is required to properly support pci end device and bridge
hotplug.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:41 -07:00
Rajesh Shah
71c3511c22 [PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe
PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans a
new bridge.  For root bridge hot-plug, the bridge and it's attached devices
may not have been configured properly yet, so it's not safe to claim those
resources at this time.

This code goes away when we clean up the way pci resources are claimed (in
pci_enable_device()), so this is only a stopgap fix.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Rajesh Shah
fab3fb0ac8 [PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges
When checking if a PCI to PCI bridge should be enabled to decode memory and/or
IO resources, we need to look at all device resources not just the first 6.
This is needed to allow PCI bridges to pass down memory and IO accesses to
child devices even when the bridge itself does not consume resources in its
PCI BARs.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Rajesh Shah
c431ada45d [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
devices attached to it that have not been configured by firmware.  In this
case, we need to configure the devices before starting them.  This patch
separates device start from device scan so that we can introduce the
configuration step in the middle.

I kept the existing semantics for pci_scan_bus() since there are a huge number
of callers to that function.

Also, I have no way of testing the changes I made to the parisc files, so this
needs review by those folks.  Sorry for the massive cross-post, this touches
files in many different places.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
jayalk@intworks.biz
120bb4246a [PATCH] PCI Allow OutOfRange PIRQ table address
I updated this to remove unnecessary variable initialization, make
check_routing be inline only and not __init, switch to strtoul, and
formatting fixes as per Randy Dunlap's recommendations.

I updated this to change pirq_table_addr to a long, and to add a warning
msg if the PIRQ table wasn't found at the specified address, as per thread
with Matthew Wilcox.

In our hardware situation, the BIOS is unable to store or generate it's PIRQ
table in the F0000h-100000h standard range. This patch adds a pci kernel
parameter, pirqaddr to allow the bootloader (or BIOS based loader) to inform
the kernel where the PIRQ table got stored. A beneficial side-effect is that,
if one's BIOS uses a static address each time for it's PIRQ table, then
pirqaddr can be used to avoid the $pirq search through that address block each
time at boot for normal PIRQ BIOSes.

Signed-off-by: Jaya Kumar <jayalk@intworks.biz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:38 -07:00
Linus Torvalds
6e5a32754c Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-06-27 20:10:18 -07:00
David S. Miller
63b614522c [SPARC64]: Get rid of fast IRQ feature.
The only real user was the assembler floppy interrupt
handler, which does not need to be in assembly.

This makes it so that there are less pieces of code which
know about the internal layout of ivector_table[] and
friends.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 17:04:45 -07:00
David S. Miller
b445e26cbf [SPARC64]: Avoid membar instructions in delay slots.
In particular, avoid membar instructions in the delay
slot of a jmpl instruction.

UltraSPARC-I, II, IIi, and IIe have a bug, documented in
the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51

The long and short of it is that if the IMU unit misses
on a branch or jmpl, and there is a store buffer synchronizing
membar in the delay slot, the chip can stop fetching instructions.

If interrupts are enabled or some other trap is enabled, the
chip will unwedge itself, but performance will suffer.

We already had a workaround for this bug in a few spots, but
it's better to have the entire tree sanitized for this rule.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 15:42:04 -07:00
Keshavamurthy Anil S
c7b645f934 [PATCH] kprobes/ia64: refuse kprobe on ivt code
Not safe to insert kprobes on IVT code.

This patch checks to see if the address on which Kprobes is being inserted is
in ivt code and if it is in ivt code then refuse to register kprobe.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Acked-by: David Mosberger <davidm@napali.hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:54 -07:00
Rusty Lynch
a528e21c23 [PATCH] kprobes/ia64: refuse inserting kprobe on slot 1
Without the ability to atomically write 16 bytes, we can not update the
middle slot of a bundle, slot 1, unless we stop the machine first.  This
patch will ensure the ability to robustly insert and remove a kprobe by
refusing to insert a kprobe on slot 1 until a mechanism is in place to
safely handle this case.

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Rusty Lynch
97f7943d70 [PATCH] Return probe redesign: ppc64 specific implementation
The following is a patch provided by Ananth Mavinakayanahalli that implements
the new PPC64 specific parts of the new function return probe design.

NOTE: Since getting Ananth's patch, I changed trampoline_probe_handler()
      to consume each of the outstanding return probem instances (feedback
      on my original RFC after Ananth cut a patch), and also added the
      arch_init() function (adding arch specific initialization.) I have
      cross compiled but have not testing this on a PPC64 machine.

Changes include:
 * Addition of kretprobe_trampoline to act as a dummy function for instrumented
   functions to return to, and for the return probe infrastructure to place
   a kprobe on on, gaining control so that the return probe handler
   can be called, and so that the instruction pointer can be moved back
   to the original return address.
 * Addition of arch_init(), allowing a kprobe to be registered on
   kretprobe_trampoline
 * Addition of trampoline_probe_handler() which is used as the pre_handler
   for the kprobe inserted on kretprobe_implementation.  This is the function
   that handles the details for calling the return probe handler function
   and returning control back at the original return address
 * Addition of arch_prepare_kretprobe() which is setup as the pre_handler
   for a kprobe registered at the beginning of the target function by
   kernel/kprobes.c so that a return probe instance can be setup when
   a caller enters the target function.  (A return probe instance contains
   all the needed information for trampoline_probe_handler to do it's job.)
 * Hooks added to the exit path of a task so that we can cleanup any left-over
   return probe instances (i.e. if a task dies while inside a targeted function
   then the return probe instance was reserved at the beginning of the function
   but the function never returns so we need to mark the instance as unused.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Rusty Lynch
9508dbfe39 [PATCH] Return probe redesign: ia64 specific implementation
The following patch implements function return probes for ia64 using
the revised design.  With this new design we no longer need to do some
of the odd hacks previous required on the last ia64 return probe port
that I sent out for comments.

Note that this new implementation still does not resolve the problem noted
by Keith Owens where backtrace data is lost after a return probe is hit.

Changes include:
 * Addition of kretprobe_trampoline to act as a dummy function for instrumented
   functions to return to, and for the return probe infrastructure to place
   a kprobe on on, gaining control so that the return probe handler
   can be called, and so that the instruction pointer can be moved back
   to the original return address.
 * Addition of arch_init(), allowing a kprobe to be registered on
   kretprobe_trampoline
 * Addition of trampoline_probe_handler() which is used as the pre_handler
   for the kprobe inserted on kretprobe_implementation.  This is the function
   that handles the details for calling the return probe handler function
   and returning control back at the original return address
 * Addition of arch_prepare_kretprobe() which is setup as the pre_handler
   for a kprobe registered at the beginning of the target function by
   kernel/kprobes.c so that a return probe instance can be setup when
   a caller enters the target function.  (A return probe instance contains
   all the needed information for trampoline_probe_handler to do it's job.)
 * Hooks added to the exit path of a task so that we can cleanup any left-over
   return probe instances (i.e. if a task dies while inside a targeted function
   then the return probe instance was reserved at the beginning of the function
   but the function never returns so we need to mark the instance as unused.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Rusty Lynch
ba8af12f43 [PATCH] Return probe redesign: x86_64 specific changes
The following patch contains the x86_64 specific changes for the new
return probe design.  Changes include:
 * Removing the architecture specific functions for querying a return probe
   instance off a stack address
 * Complete rework onf arch_prepare_kretprobe() and trampoline_probe_handler()
 * Removing trampoline_post_handler()
 * Adding arch_init() so that now we handle registering the return probe
   trampoline instead of kernel/kprobes.c doing it

NOTE:
Note that with this new design, the dependency on calculating a pointer to
the task off the stack pointer no longer exist (resolving the problem of
interruption stacks as pointed out in the original feedback to this port.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Rusty Lynch
4bdbd37f6d [PATCH] Return probe redesign: i386 specific changes
The following patch contains the i386 specific changes for the new
return probe design.  Changes include:

 * Removing the architecture specific functions for querying a return probe
   instance off a stack address
 * Complete rework onf arch_prepare_kretprobe() and trampoline_probe_handler()
 * Removing trampoline_post_handler()
 * Adding arch_init() so that now we handle registering the return probe
   trampoline instead of kernel/kprobes.c doing it

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Ananth N Mavinakayanahalli
9ec4b1f356 [PATCH] kprobes: fix single-step out of line - take2
Now that PPC64 has no-execute support, here is a second try to fix the
single step out of line during kprobe execution.  Kprobes on x86_64 already
solved this problem by allocating an executable page and using it as the
scratch area for stepping out of line.  Reuse that.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:52 -07:00
Linus Torvalds
d3b8a1a849 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 2005-06-27 15:13:26 -07:00
Andrea Arcangeli
ffaa8bd6c9 [PATCH] seccomp: tsc disable
I believe at least for seccomp it's worth to turn off the tsc, not just for
HT but for the L2 cache too.  So it's up to you, either you turn it off
completely (which isn't very nice IMHO) or I recommend to apply this below
patch.

This has been tested successfully on x86-64 against current cogito
repository (i686 compiles so I didn't bother testing ;).  People selling
the cpu through cpushare may appreciate this bit for a peace of mind.

There's no way to get any timing info anymore with this applied
(gettimeofday is forbidden of course).  The seccomp environment is
completely deterministic so it can't be allowed to get timing info, it has
to be deterministic so in the future I can enable a computing mode that
does a parallel computing for each task with server side transparent
checkpointing and verification that the output is the same from all the 2/3
seller computers for each task, without the buyer even noticing (for now
the verification is left to the buyer client side and there's no
checkpointing, since that would require more kernel changes to track the
dirty bits but it'll be easy to extend once the basic mode is finished).

Eliminating a cold-cache read of the cr4 global variable will save one
cacheline during the tlb flush while making the code per-cpu-safe at the
same time.  Thanks to Mikael Pettersson for noticing the tlb flush wasn't
per-cpu-safe.

The global tlb flush can run from irq (IPI calling do_flush_tlb_all) but
it'll be transparent to the switch_to code since the IPI won't make any
change to the cr4 contents from the point of view of the interrupted code
and since it's now all per-cpu stuff, it will not race.  So no need to
disable irqs in switch_to slow path.

Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:44 -07:00
Benjamin Herrenschmidt
6ae3db110e [PATCH] ppc64: Add missing exports
This patch adds a couple of missing symbol exports.  flush_dcache_page is
used by the AGP driver and rtc_lock by the RTC driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:43 -07:00
Benjamin Herrenschmidt
8c8709334c [PATCH] ppc32: Remove CONFIG_PMAC_PBOOK
This patch removes CONFIG_PMAC_PBOOK (PowerBook support).  This is now
split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some
powerbooks have, CONFIG_PM for power management related code, and just left
out of any CONFIG_* option for some generally useful stuff that can be used
on non-laptops as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:43 -07:00
Benjamin Herrenschmidt
e4ee69c8c1 [PATCH] ppc32: Bump PMU interrupt priority
The Power Management Unit on PowerMacs is very sensitive to timeouts during
async message exchanges.  It uses rather crude protocol based on a shift
register with an interrupt and is almost continuously exchanging messages with
the host CPU on laptops.

This patch adds a routine to the open_pic driver to be able to select a PMU
driver so that it bumps it's interrupt priority to above the normal level.

This will allow PMU interrupts to occur while another interrupt is pending,
and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to
a timeout in PMU communication caused by excessive interrupt latency.  The
problem is very rare, and usually just doesn't happen, but it is still useful
to make things even more robust.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Marcelo Tosatti
bb16574681 [PATCH] 8xx: avoid "dcbst" misbehaviour with unpopulated TLB
The proposed _tlbie call at update_mmu_cache() is safe because:

Addresses for which update_mmu_cache() gets invocated are never inside the
static kernel virtual mapping, meaning that there is no risk for the
_tlbie() here to be thrashing the pinned entry, as Dan suspected.

The intermediate TLB state in which this bug can be triggered is not
visible by userspace or any other contexts, except the page fault handling
path.  So there is no need to worry about userspace dcbxxx users.

The other solution to this is to avoid dcbst misbehaviour in the first
place, which involves changing in-kernel "dcbst" callers to use 8xx
specific SPR's.

Summary:

On 8xx, cache control instructions (particularly "dcbst" from
flush_dcache_icache) fault as write operation if there is an unpopulated
TLB entry for the address in question.  To workaround that, we invalidate
the TLB here, thus avoiding dcbst misbehaviour.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Yoichi Yuasa
d4b3a80e39 [PATCH] mips: fixed try_to_freeze build error
arch/mips/kernel/signal.c: In function 'do_signal':
arch/mips/kernel/signal.c:460: error: too many arguments to function 'try_to_freeze'

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Kumar Gala
9c4142a133 [PATCH] ppc32: Fix compiling of sandpoint platform
Lost a curly brace in translation.  Everything is better now.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:41 -07:00
Linus Torvalds
8b789b7d7e Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-06-27 15:00:10 -07:00
David Brownell
313980c927 [PATCH] USB: omap_udc updates (mostly cleanups)
Various USB patches, mostly for portability:

  - Fifo mode 1 didn't work previously (oopsed), so now it's fixed and
    (why not) defines even more endpoints for composite devices.

  - OMAP 1710 doesn't have an internal transceiver.

  - Small PM update:  if the USB link is suspended, don't disconnect on
    entry to deep sleep.

  - Be more correct about handling zero length control reads.  OMAP
    seems to mis-handle that protocol peculiarity though; best avoided.

  - Platform device resources (for UDC and OTG controllers) now use
    physical addresses, so /proc/iomem is more consistent.

  - Minor cleanups, notably (by volume) for "sparse" NULL warnings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2005-06-27 14:43:41 -07:00
Jens Axboe
22e2c507c3 [PATCH] Update cfq io scheduler to time sliced design
This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:33:29 -07:00
Russell King
f3bb742640 [PATCH] ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 14:49:10 +01:00
Russell King
a013053d49 [PATCH] ARM: Move memmap freeing into init.c
It doesn't make sense for this to be in mm-armv.c now that 26-bit
ARM support is no longer integrated into arch/arm.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 14:16:47 +01:00
Russell King
a343e6075a [PATCH] ARM: Move PGD kernel page table initialisation
It doesn't make sense to have the PGD kernel pointers initialisation
separate from the PGD user pointers, especially when we clean the
data cache over the whole range.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 14:08:56 +01:00
Russell King
2ea83398b7 [PATCH] ARM: Add VST idle loop call
This call allows the dynamic tick support to reprogram the timer
immediately before the CPU idles.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 14:04:05 +01:00
Russell King
99bcc05908 [PATCH] ARM: Add missed AAEC2000 file
My scripts missed committing this file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 13:59:43 +01:00
Linus Torvalds
41b6c37326 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-06-26 17:28:24 -07:00
Lennert Buytenhek
26799e675e [PATCH] ARM: 2757/1: remove ixdp2400_init_irq from ixdp2800 code
Patch from Lennert Buytenhek

Compiling one kernel that supports both ixdp2400 and ixdp2800 gives
an error, as a copy of the ixdp2400 irq init routing accidentally
ended up in ixdp2800.c somehow.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26 22:24:19 +01:00
Lennert Buytenhek
baaf7ed179 [PATCH] ARM: 2756/1: add ixp2000 msf mapping
Patch from Lennert Buytenhek

Add a mapping for the ixp2400 and ixp2800 msf unit.  The msf is the
ixp2000's 'media and switch fabric' unit, which handles the networking
part of the chip.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26 22:24:17 +01:00
Russell King
09b8b5f843 [PATCH] ARM: Add SA_TIMER flag to timer interrupts
VST needs to know which timer handler is for the timer interrupt.
Mark all timer interrupts with the SA_TIMER flag.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26 17:06:36 +01:00
Kumar Gala
7d681b23d6 [PATCH] ppc32: Fix MPC83xx IPIC external interrupt pending register offset
The pending registers for IRQ1-IRQ7 were pointing to the interrupt pending
register instead of the external one.

Signed-off-by: Tony Li <Tony.Li@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 08:43:19 -07:00
Andrew Morton
bdb94f3a78 [PATCH] arm: swsusp build fix
Another swsusp fixup.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 08:43:19 -07:00
Linus Torvalds
6f0dcb72d6 Fix up try_to_freeze() usage in arch/i386/kernel/signal.c
The parentheses were missing. Noted by Pavel Machek.
2005-06-25 20:09:12 -07:00
Linus Torvalds
2031d0f586 Merge Christoph's freeze cleanup patch 2005-06-25 17:16:53 -07:00
Christoph Lameter
3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Christophe Lucas
f90e7185ee [PATCH] printk: arch/i386/mm/pgtable.c
printk() calls should include appropriate KERN_* constant.

Signed-off-by: Christophe Lucas <clucas@rotomalug.org>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:08 -07:00
Christophe Lucas
ee48dd5799 [PATCH] printk: arch/i386/mm/ioremap.c
printk() calls should include appropriate KERN_* constant.

Signed-off-by: Christophe Lucas <clucas@rotomalug.org>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:08 -07:00
Olaf Hering
f14c6fd0fc [PATCH] update comment about gzip scratch size
fix a comment about the array size.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:07 -07:00
Adrian Bunk
9e84d1c36a [PATCH] i386: cleanup boot_cpu_logical_apicid variables
There are currently two different boot_cpu_logical_apicid variables:
- a global one in mpparse.c
- a static one in smpboot.c

Of these two, only the one in smpboot.c might be used (through
boot_cpu_apicid).

This patch therefore removes the one in mpparse.c .

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:05 -07:00
Domen Puncer
f45494480f [PATCH] x86_64: coding style and whitespace fixups
Remove some of the unnecessary differences between arch/i386 and
arch/x86_64.  This patch fixes more whitespace issues, some miscellaneous
typos, a wrong URL and a factually incorrect statement about the current
boot sector code.

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:02 -07:00
Jesper Juhl
4ae6673e02 [PATCH] get rid of redundant NULL checks before kfree() in arch/i386/
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:00 -07:00
Domen Puncer
40086ea17e [PATCH] arch/i386/crypto/aes.c: fix sparse warnings
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:59 -07:00
Domen Puncer
c7c5844526 [PATCH] arch/i386/mm/fault.c: fix sparse warnings
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:59 -07:00
Domen Puncer
77617bd806 [PATCH] arch/i386/kernel/apm.c: fix sparse warnings
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:58 -07:00
Domen Puncer
3f3ae3471f [PATCH] arch/i386/kernel/traps.c: fix sparse warnings
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:58 -07:00
randy_dunlap
09dbb4768c [PATCH] x86-64: add memcpy/memset prototypes
Put function prototypes for memset() and memcpy() ahead of where
there are used, to kill sparse warnings:

arch/x86_64/boot/compressed/../../../../lib/inflate.c:317:3: warning: undefined identifier 'memset'
arch/x86_64/boot/compressed/../../../../lib/inflate.c:601:11: warning: undefined identifier 'memcpy'
arch/x86_64/boot/compressed/misc.c:151:2: warning: undefined identifier 'memcpy'
arch/x86_64/boot/compressed/../../../../lib/inflate.c:317:3: warning: call with no type!
arch/x86_64/boot/compressed/../../../../lib/inflate.c:601:17: warning: call with no type!
arch/x86_64/boot/compressed/misc.c:151:9: warning: call with no type!

Signed-off-by: randy_dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:57 -07:00
Maneesh Soni
72414d3f1d [PATCH] kexec code cleanup
o Following patch provides purely cosmetic changes and corrects CodingStyle
  guide lines related certain issues like below in kexec related files

  o braces for one line "if" statements, "for" loops,
  o more than 80 column wide lines,
  o No space after "while", "for" and "switch" key words

o Changes:
  o take-2: Removed the extra tab before "case" key words.
  o take-3: Put operator at the end of line and space before "*/"

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:55 -07:00
Alexander Nyberg
4f339ecb30 [PATCH] kdump: Save trap information for later analysis
If we are faulting in kernel it is quite possible this will lead to a
panic.  Save trap number, cr2 (in case of page fault) and error_code in the
current thread (these fields already exist for signal delivery but are not
used here).

This helps later kdump crash analyzing from user-space (a script has been
submitted to dig this info out in gdb).

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: <fastboot@lists.osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:55 -07:00
Alexander Nyberg
6e274d1443 [PATCH] kdump: Use real pt_regs from exception
Makes kexec_crashdump() take a pt_regs * as an argument.  This allows to
get exact register state at the point of the crash.  If we come from direct
panic assertion NULL will be passed and the current registers saved before
crashdump.

This hooks into two places:
die(): check the conditions under which we will panic when calling
do_exit and go there directly with the pt_regs that caused the fatal
fault.

die_nmi(): If we receive an NMI lockup while in the kernel use the
pt_regs and go directly to crash_kexec(). We're probably nested up badly
at this point so this might be the only chance to escape with proper
information.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:54 -07:00
Vivek Goyal
2030eae52b [PATCH] Retrieve elfcorehdr address from command line
This patch adds support for retrieving the address of elf core header if one
is passed in command line.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:53 -07:00
Vivek Goyal
60e64d46a5 [PATCH] kdump: Routines for copying dump pages
This patch provides the interfaces necessary to read the dump contents,
treating it as a high memory device.

Signed off by Hariprasad Nellitheertha <hari@in.ibm.com>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:53 -07:00
Vivek Goyal
5f016456c9 [PATCH] kdump: Kconfig
- config option CONFIG_CRASH_DUMP

- Made it dependent on HIGHMEM.  This is required as capture kernel treats
  the previous kernel's memory as high memmory and stitches a PTE for
  accessing it.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:53 -07:00
Vivek Goyal
92aa63a5a1 [PATCH] kdump: Retrieve saved max pfn
This patch retrieves the max_pfn being used by previous kernel and stores it
in a safe location (saved_max_pfn) before it is overwritten due to user
defined memory map.  This pfn is used to make sure that user does not try to
read the physical memory beyond saved_max_pfn.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:52 -07:00
Vivek Goyal
a3ea8ac846 [PATCH] Kexec: Kexec on panic fix with nmi watchdog enabled
o Problem: Kexec on panic hangs if first kernel is booted with nmi_watchdog
  command line parameter. This problem occurs because kexec crash shutdown
  code replaces the NMI callback handler. This handler saves the cpu register
  states and halts the cpu. If system is booted with nmi_watchdog parameter,
  then crashing cpu also runs this nmi handler and halts itself.

o This patch fixes the problem by keeping a track of crashing cpu and not
  executing the new nmi handler on crashing cpu.

o There is a dependence on smp_processor_id() function which might return
  insane value for cpu, if cpu field of thread_info is corrupted.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:52 -07:00
Vivek Goyal
4d55476c3f [PATCH] kdump: NMI handler segment selector, stack pointer fix
CPU does not save ss and esp on stack if execution was already in kernel mode
at the time of NMI occurrence.  This leads to saving of erractic values for ss
and esp.  This patch fixes the issue.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:52 -07:00
Vivek Goyal
625f1c8219 [PATCH] Kdump: Export crash notes section address through sysfs
o Following patch exports kexec global variable "crash_notes" to user space
  through sysfs as kernel attribute in /sys/kernel.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Heiko Carstens
cf13f0eaff [PATCH] kexec: s390 support
Add kexec support for s390 architecture.

From: Milton Miller <miltonm@bga.com>

- Fix passing of first argument to relocate_kernel assembly.
- Fix Kconfig description.
- Remove wrong comment and comments that describe obvious things.
- Allow only KEXEC_TYPE_DEFAULT as image type -> dump not supported.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
R Sharada
fce0d57403 [PATCH] ppc64: kexec support for ppc64
This patch implements the kexec support for ppc64 platforms.

A couple of notes:

1)  We copy the pages in virtual mode, using the full base kernel
    and a statically allocated stack.   At kexec_prepare time we
    scan the pages and if any overlap our (0, _end[]) range we
    return -ETXTBSY.

    On PowerPC 64 systems running in LPAR (logical partitioning)
    mode, only a small region of memory, referred to as the RMO,
    can be accessed in real mode.  Since Linux runs with only one
    zone of memory in the memory allocator, and it can be orders of
    magnitude more memory than the RMO, looping until we allocate
    pages in the source region is not feasible.  Copying in virtual
    means we don't have to write a hash table generation and call
    hypervisor to insert translations, instead we rely on the pinned
    kernel linear mapping.  The kernel already has move to linked
    location built in, so there is no requirement to load it at 0.

    If we want to load something other than a kernel, then a stub
    can be written to copy a linear chunk in real mode.

2)  The start entry point gets passed parameters from the kernel.
    Slaves are started at a fixed address after copying code from
    the entry point.

    All CPUs get passed their firmware assigned physical id in r3
    (most calling conventions use this register for the first
    argument).

    This is used to distinguish each CPU from all other CPUs.
    Since firmware is not around, there is no other way to obtain
    this information other than to pass it somewhere.

    A single CPU, referred to here as the master and the one executing
    the kexec call, branches to start with the address of start in r4.
    While this can be calculated, we have to load it through a gpr to
    branch to this point so defining the register this is contained
    in is free.  A stack of unspecified size is available at r1
    (also common calling convention).

    All remaining running CPUs are sent to start at absolute address
    0x60 after copying the first 0x100 bytes from start to address 0.
    This convention was chosen because it matches what the kernel
    has been doing itself.  (only gpr3 is defined).

    Note: This is not quite the convention of the kexec bootblock v2
    in the kernel.  A stub has been written to convert between them,
    and we may adjust the kernel in the future to allow this directly
    without any stub.

3)  Destination pages can be placed anywhere, even where they
    would not be accessible in real mode.  This will allow us to
    place ram disks above the RMO if we choose.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: R Sharada <sharada@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
R Sharada
f4c82d5132 [PATCH] ppc64 kexec: native hash clear
Add code to clear the hash table and invalidate the tlb for native (SMP,
non-LPAR) mode.  Supports 16M and 4k pages.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: R Sharada <sharada@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Eric W. Biederman
70765aa4bd [PATCH] kexec: kexec ppc support
I have tweaked this patch slightly to handle an empty list
of pages to relocate passed to relocate_new_kernel.  And
I have added ppc_md.machine_crash_shutdown.  To keep up with
the changes in the generic kexec infrastructure.

From: Albert Herranz <albert_herranz@yahoo.es>

The following patch adds support for kexec on the ppc32 platform.

Non-OpenFirmware based platforms are likely to work directly without
additional changes on the kernel side.  The kexec-tools userland package
may need to be slightly updated, though.

For OpenFirmware based machines, additional work is still needed on the
kernel side before kexec support is ready.  Benjamin Herrenschmidt is
kindly working on that part.

In order for a ppc platform to use the kexec kernel services it must
implement some ppc_md hooks.  Otherwise, kexec will be explicitly disabled,
as suggested by benh.

There are 3+1 new ppc_md hooks that a platform supporting kexec may
implement.  Two of them are mandatory for kexec to work.  See
include/asm-ppc/machdep.h for details.

- machine_kexec_prepare(image)

  This function is called to make any arrangements to the image before it
  is loaded.

  This hook _MUST_ be provided by a platform in order to activate kexec
  support for that platform.  Otherwise, the platform is considered to not
  support kexec and the kexec_load system call will fail (that makes all
  existing platforms by default non-kexec'able).

- machine_kexec_cleanup(image)

  This function is called to make any cleanups on image after the loaded
  image data it is freed.  This hook is optional.  A platform may or may
  not provide this hook.

- machine_kexec(image)

  This function is called to perform the _actual_ kexec.  This hook
  _MUST_ be provided by a platform in order to activate kexec support for
  that platform.

  If a platform provides machine_kexec_prepare but forgets to provide
  machine_kexec, a kexec will fall back to a reboot.

  A ready-to-use machine_kexec_simple() generic function is provided to,
  hopefully, simplify kexec adoption for embedded platforms.  A platform
  may call this function from its specific machine_kexec hook, like this:

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}

- machine_shutdown()

  This function is called to perform any machine specific shutdowns, not
  already done by drivers.  This hook is optional.  A platform may or may
  not provide this hook.

An example (trimmed) platform specific module for a platform supporting
kexec through the existing machine_kexec_simple follows:

/* ... */

#ifdef CONFIG_KEXEC
int myplatform_kexec_prepare(struct kimage *image)
{
        /* here, we can place additional preparations
*/
        return 0; /* yes, we support kexec */
}

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}
#endif /* CONFIG_KEXEC */

/* ... */

void __init
platform_init(unsigned long r3, unsigned long r4,
unsigned long r5,
              unsigned long r6, unsigned long r7)
{

/* ... */

#ifdef CONFIG_KEXEC
        ppc_md.machine_kexec_prepare =
myplatform_kexec_prepare;
        ppc_md.machine_kexec         =
myplatform_kexec;
#endif /* CONFIG_KEXEC */

/* ... */

}

The kexec ppc kernel support has been heavily tested on the GameCube Linux
port, and, as reported in the fastboot mailing list, it has been tested too
on a Moto 82xx ppc by Rick Richardson.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Eric W. Biederman
5f5609df0c [PATCH] crashdump: x86_64: crashkernel option
This is the x86_64 implementation of the crashkernel option.  It reserves
a window of memory very early in the bootup process, so we never use
it for anything but the kernel to switch to when the running
kernel panics.

In addition to reserving this memory a resource structure is registered
so looking at /proc/iomem it is clear what happened to that memory.

ISSUES:
Is it possible to implement this in a architecture generic way?
What should be done with architectures that always use an iommu and
thus don't report their RAM memory resources in /proc/iomem?

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:50 -07:00
Eric W. Biederman
5234f5eb04 [PATCH] kexec: x86_64 kexec implementation
This is the x86_64 implementation of machine kexec.  32bit compatibility
support has been implemented, and machine_kexec has been enhanced to not care
about the changing internal kernel paget table structures.

From: Alexander Nyberg <alexn@dsv.su.se>

      build fix

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:50 -07:00
Eric W. Biederman
d89559589a [PATCH] kexec: x86_64: factor out apic shutdown code
Factor out the apic and smp shutdown code from machine_restart so it can be
called by in the kexec reboot path as well.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:50 -07:00
Eric W. Biederman
1bc3b91aee [PATCH] crashdump: x86 crashkernel option
This is the x86 implementation of the crashkernel option.  It reserves a
window of memory very early in the bootup process, so we never use it for
anything but the kernel to switch to when the running kernel panics.

In addition to reserving this memory a resource structure is registered so
looking at /proc/iomem it is clear what happened to that memory.

ISSUES:
Is it possible to implement this in a architecture generic way?
What should be done with architectures that always use an iommu and
thus don't report their RAM memory resources in /proc/iomem?

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:50 -07:00
Eric W. Biederman
63d30298ef [PATCH] kexec: x86 shutdown APICs during crash_shutdown
In the case of a crash/panic an architecture specific function
machine_crash_shutdown is called.  This patch adds to the x86 machine_crash
function the standard kernel code for shutting down apics.

Every line of code added to that function increases the risk that we will call
code after a kernel panic that is not safe.

This patch should not make it to the stable kernel without a being reviewed a
lot more.  It is unclear how much a hardned kernel can take when it comes to
misconfigured apics.  So since a normal kernel has problems this patch does a
clean shutdown.

It is my expectation this patch will be dropped from future generations of the
kexec work.  But for the moment it is a crutch to keep from breaking
everything.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:50 -07:00
Eric W. Biederman
2c818b45a2 [PATCH] kexec: x86: snapshot registers during crash shutdown
After the kernel panics if we wish to generate an entire machine core file it
is very nice to know the register state at the time the machine crashed.

After long discussion it was realized that if you are going to be saving the
information anyway it is reasonable to store the information in a format that
it will be used and recognized in so the register state is stored in the
standard ELF note format.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:49 -07:00
Eric W. Biederman
c4ac4263a0 [PATCH] crashdump: x86: add NMI handler to capture other CPUs
One of the dangers when switching from one kernel to another is what happens
to all of the other cpus that were running in the crashed kernel.  In an
attempt to avoid that problem this patch adds a nmi handler and attempts to
shoot down the other cpus by sending them non maskable interrupts.

The code then waits for 1 second or until all known cpus have stopped running
and then jumps from the running kernel that has crashed to the kernel in
reserved memory.

The kernel spin loop is used for the delay as that should behave continue to
be safe even in after a crash.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:49 -07:00
Eric W. Biederman
5033cba087 [PATCH] kexec: x86 kexec core
This is the i386 implementation of kexec.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:49 -07:00
Eric W. Biederman
dd2a13054f [PATCH] kexec: x86: factor out apic shutdown code
Factor out the apic and smp shutdown code from machine_restart so it can be
called by in the kexec reboot path as well.

By switching to the bootstrap cpu by default on reboot I can delete/simplify
some motherboard fixups well.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:49 -07:00
Eric W. Biederman
d0537508a9 [PATCH] kexec: x86_64: add CONFIG_PHYSICAL_START
For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86_64 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Vivek Goyal
8a9190853c [PATCH] kexec: reserve Bootmem fix for booting nondefault location kernel
This patch fixes a problem with reserving memory during boot up of a kernel
built for non-default location.  Currently boot memory allocator reserves
the memory required by kernel image, boot allocaotor bitmap etc.  It
assumes that kernel is loaded at 1MB (HIGH_MEMORY hard coded to 1024*1024).
 But kernel can be built for non-default locatoin, hence existing
hardcoding will lead to reserving unnecessary memory.  This patch fixes it.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Eric W. Biederman
3d345e3fc9 [PATCH] kexec: x86: add CONFIG_PYSICAL_START
For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Eric W. Biederman
5ded01e83e [PATCH] kexec: x86_64: vmlinux: fix physical addresses
The vmlinux on x86_64 does not report the correct physical address of
the kernel.  Instead in the physical address field it currently
reports the virtual address of the kernel.

This is patch is a bug fix that corrects vmlinux to report the
proper physical addresses.

This is potentially a help for crash dump analysis tools.

This definitiely allows bootloaders that load vmlinux as a standard
ELF executable.  Bootloaders directly loading vmlinux become of
practical importance when we consider the kexec on panic case.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:47 -07:00
Eric W. Biederman
ad0d75ebac [PATCH] kexec: x86: vmlinux: fix physical addresses
The vmlinux on i386 does not report the correct physical address of
the kernel.  Instead in the physical address field it currently
reports the virtual address of the kernel.

This is patch is a bug fix that corrects vmlinux to report the
proper physical addresses.

This is potentially a help for crash dump analysis tools.

This definitiely allows bootloaders that load vmlinux as a standard
ELF executable.  Bootloaders directly loading vmlinux become of
practical importance when we consider the kexec on panic case.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:47 -07:00
Eric W. Biederman
208fb93162 [PATCH] kexec: x86_64: restore apic virtual wire mode on shutdown
When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:47 -07:00
Eric W. Biederman
650927ef8a [PATCH] kexec: x86: resture apic virtual wire mode on shutdown
When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:47 -07:00
Eric W. Biederman
719e711050 [PATCH] kexec: x86_64: add i8259 shutdown method
From: Eric W. Biederman <ebiederm@xmission.com

The following patch simply adds a shutdown method to the x86_64 i8259 code.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:46 -07:00
Eric W. Biederman
cee5dab485 [PATCH] kexec: x86: i8259 shutdown: disable interrupts
From: Eric W. Biederman <ebiederm@xmission.com>

This patch disables interrupt generation from the legacy pic on reboot.  Now
that there is a sys_device class it should not be called while drivers are
still using interrupts.

There is a report about this breaking ACPI power off on some systems.
http://bugme.osdl.org/show_bug.cgi?id=4041
However the final comment seems to exonerate this code.  So until
I get more information I believe that was a false positive.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:46 -07:00
Eric W. Biederman
70adada428 [PATCH] kexec: x86_64: e820 64bit fix
From: Eric W. Biederman <ebiederm@xmission.com>

It is ok to reserve resources > 4G on x86_64 struct resource is 64bit now :)

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:46 -07:00
Eric W. Biederman
9635b47d91 [PATCH] kexec: x86: local apic fix
From: "Maciej W. Rozycki" <macro@linux-mips.org>

Fix a kexec problem whcih causes local APIC detection failure.

The problem is detect_init_APIC() is called early, before the command line
have been processed.  Therefore "lapic" (and "nolapic") have not been seen,
yet.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:46 -07:00
Ingo Molnar
cc19ca86a0 [PATCH] consolidate PREEMPT options into kernel/Kconfig.preempt
This patch consolidates the CONFIG_PREEMPT and CONFIG_PREEMPT_BKL
preemption options into kernel/Kconfig.preempt.  This, besides reducing
source-code, also enables more centralized tweaking of preemption related
options.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Dinakar Guniguntala
7f1867a5b3 [PATCH] Dynamic sched domains: ia64 changes
ia64 changes similar to kernel/sched.c.

Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Acked-by: Paul Jackson <pj@sgi.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Nick Piggin
687f1661d3 [PATCH] sched: sched tuning
Do some basic initial tuning.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:42 -07:00
Paul E. McKenney
b2b1866006 [PATCH] RCU: clean up a few remaining synchronize_kernel() calls
2.6.12-rc6-mm1 has a few remaining synchronize_kernel()s, some (but not
all) in comments.  This patch changes these synchronize_kernel() calls (and
comments) to synchronize_rcu() or synchronize_sched() as follows:

- arch/x86_64/kernel/mce.c mce_read(): change to synchronize_sched() to
  handle races with machine-check exceptions (synchronize_rcu() would not cut
  it given RCU implementations intended for hardcore realtime use.

- drivers/input/serio/i8042.c i8042_stop(): change to synchronize_sched() to
  handle races with i8042_interrupt() interrupt handler.  Again,
  synchronize_rcu() would not cut it given RCU implementations intended for
  hardcore realtime use.

- include/*/kdebug.h comments: change to synchronize_sched() to handle races
  with NMIs.  As before, synchronize_rcu() would not cut it...

- include/linux/list.h comment: change to synchronize_rcu(), since this
  comment is for list_del_rcu().

- security/keys/key.c unregister_key_type(): change to synchronize_rcu(),
  since this is interacting with RCU read side.

- security/keys/process_keys.c install_session_keyring(): change to
  synchronize_rcu(), since this is interacting with RCU read side.

Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:38 -07:00
Michael Holzheu
66a464dbc8 [PATCH] s390: debug feature changes
This patch changes the memory allocation method for the s390 debug feature.
Trace buffers had been allocated using the get_free_pages() function before.
Therefore it was not possible to get big memory areas in a running system due
to memory fragmentation.  Now the trace buffers are subdivided into several
subbuffers with pagesize.  Therefore it is now possible to allocate more
memory for the trace buffers and more trace records can be written.

In addition to that, dynamic specification of the size of the trace buffers is
implemented.  It is now possible to change the size of a trace buffer using a
new debugfs file instance.  When writing a number into this file, the trace
buffer size is changed to 'number * pagesize'.

In the past all the traces could be obtained from userspace by accessing files
in the "proc" filesystem.  Now with debugfs we have a new filesystem which
should be used for debugging purposes.  This patch moves the debug feature
from procfs to debugfs.

Since the interface of debug_register() changed, all device drivers, which use
the debug feature had to be adjusted.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:37 -07:00
Christian Borntraeger
6b979de395 [PATCH] s390: add vmcp interface
Add interface to issue VM control program commands.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:37 -07:00
Heiko Carstens
77fa22450d [PATCH] s390: improved machine check handling
Improved machine check handling.  Kernel is now able to receive machine checks
while in kernel mode (system call, interrupt and program check handling).
Also register validation is now performed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:37 -07:00
Jeff Dike
29d56cfe3c [PATCH] uml: hot-unplug code cleanup
Clean up the hot-unplugging code.  There is now an id procedure which is
called to figure out what device we're talking to.  The error messages from
that are now done from mconsole_remove instead of the driver.  remove is now
called with the device number, after it has been checked, so doesn't need to
do sanity checking on it.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:36 -07:00
Jeff Dike
fc47a0d18a [PATCH] uml: time initialization tidying
user_time_init_skas and user_time_init_tt were essentially the same.  So, this
merges them, deleting the mode-specific functions and declarations.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:35 -07:00
Jeff Dike
026549d284 [PATCH] uml: always disable kmalloc during shutdown
kmalloc wasn't being disabled during panic.  This patch ensures that, no
matter how UML is exiting, it is disabled.  This matters because part of the
cleanup is to remove the umid file, which involves readdir, which calls
malloc.  This must map to libc malloc, rather than kmalloc or vmalloc.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:35 -07:00
Jeff Dike
a6f4e3cf75 [PATCH] uml: fix timer initialization
In skas mode, the call to uml_idle_timer permanently shut off the virtual
timer, resulting in no timer ticks to anything but the idle thread.  This is
likely the cause of the soft lockups that are seen sporadically in recent
UMLs.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:35 -07:00
Jeff Dike
e0877f07e8 [PATCH] uml: fork cleanup
Fix the do_fork calling convention: normal arch pass the regs and the new sp
value to do_fork instead of NULL.

Currently the arch-independent code ignores these values, while the UML code
(actually it's copy_thread) gets the right values by itself.

With this patch, things are fixed up.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:35 -07:00
Jesper Juhl
41f2148a67 [PATCH] uml: kfree cleanup
Here's a small patch to remove a few unnessesary NULL pointer checks before
kfree() in arch/um/drivers/daemon_user.c

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:35 -07:00
Andrew Morton
350d5bd84e [PATCH] uml: fix sizeof usage
Size of pointer doesn't seem right, but maybe my solution isn't either
(sig_size maybe?).

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:34 -07:00
Pavel Machek
8d783b3e02 [PATCH] swsusp: clean assembly parts
This patch fixes register saving so that each register is only saved once,
and adds missing saving of %cr8 on x86-64.  Some reordering so that
save/restore is more logical/safer (segment registers should be restored
after gdt).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:33 -07:00
Pavel Machek
343c3f6428 [PATCH] s-t-RAM: load gdt the right way
Sleep code uses wrong version of lgdt, that does the wrong thing when
gdt is beyond 16MB or so.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:32 -07:00
Pavel Machek
648be31881 [PATCH] swsusp: kill config_pm_disk
CONFIG_PM_DISK is long gone, but it still managed to survived at few
places.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:32 -07:00
Li Shaohua
5a72e04df5 [PATCH] suspend/resume SMP support
Using CPU hotplug to support suspend/resume SMP.  Both S3 and S4 use
disable/enable_nonboot_cpus API.  The S4 part is based on Pavel's original S4
SMP patch.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:32 -07:00
Shaohua Li
a9fa06c26f [PATCH] set cpu_state for CPU hotplug (ia64)
Dead CPU notifies online CPU that it's dead using cpu_state variable.
After switching to physical cpu hotplug, we forgot setting the variable.
This patch fixes it.  Currently only __cpu_die uses it.  We changed other
locations for consistency in case others use it.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:31 -07:00
Ashok Raj
a02c4cb67e [PATCH] x86_64: Provide ability to choose using shortcuts for IPI in flat mode.
This patch provides an option to switch broadcast or use mask version for
sending IPI's.  If CONFIG_HOTPLUG_CPU is defined, we choose not to use
broadcast shortcuts by default, otherwise we choose broadcast mode as default.

both cases, one can change this via startup cmd line option, to choose
no-broadcast mode.

	no_ipi_broadcast=1

This is provided on request from Andi Kleen, since he doesnt agree with
replacing IPI shortcuts as a solution for CPU hotplug.  Without removing
broadcast IPI's, it would mean lots of new code for __cpu_up() path, which
would acheive the same results.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Andi Kleen <ak@muc.de>
Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:31 -07:00
Ashok Raj
884d9e40b4 [PATCH] x86_64: Dont use broadcast shortcut to make it cpu hotplug safe.
Broadcast IPI's provide un-expected behaviour for cpu hotplug.  CPU's in
offline state also end up receiving the IPI.  Once the cpus become online they
receive these stale IPI's which are bad and introduce unexpected behaviour.

This is easily avoided by not sending a broadcast and addressing just the
CPU's in online map.  Doing prelim cycle counts it appears there is no big
overhead and numbers seem around 0x3000-0x3900 on an average on x86 and x86_64
systems with CPUS running 3G, both for broadcast and mask version of the
API's.

The shortcuts are useful only for flat mode (where the perf shows no
degradation), and in cluster mode, its unicast anyway.  Its simpler to just
not use broadcast anymore.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Andi Kleen <ak@muc.de>
Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:31 -07:00
Ashok Raj
cb0cd8d49a [PATCH] x86_64: CPU hotplug sibling map cleanup
This patch is a minor cleanup to the cpu sibling/core map.  It is required
that this setup happens on a per-cpu bringup time.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Andi Kleen <ak@muc.de>
Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:31 -07:00
Ashok Raj
76e4f660d9 [PATCH] x86_64: CPU hotplug support
Experimental CPU hotplug patch for x86_64
  -----------------------------------------
This supports logical CPU online and offline.
- Test with maxcpus=1, and then kick other cpu's off to test if init code
  is all cleaned up. CONFIG_SCHED_SMT works as well.
- idle threads are forked on demand from keventd threads for clean startup

TBD:
1. Not tested on a real NUMA machine (tested with numa=fake=2)
2. Handle ACPI pieces for physical hotplug support.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Andi Kleen <ak@muc.de>
Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Shaohua.li<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:30 -07:00
Ashok Raj
e6982c671c [PATCH] x86_64: Change init sections for CPU hotplug support
This patch adds __cpuinit and __cpuinitdata sections that need to exist past
boot to support cpu hotplug.

Caveat: This is done *only* for EM64T CPU Hotplug support, on request from
Andi Kleen.  Much of the generic hotplug code in kernel, and none of the other
archs that support CPU hotplug today, i386, ia64, ppc64, s390 and parisc dont
mark sections with __cpuinit, but only mark them as __devinit, and
__devinitdata.

If someone is motivated to change generic code, we need to make sure all
existing hotplug code does not break, on other arch's that dont use __cpuinit,
and __cpudevinit.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Andi Kleen <ak@muc.de>
Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:30 -07:00
Li Shaohua
e1367daf3e [PATCH] cpu state clean after hot remove
Clean CPU states in order to reuse smp boot code for CPU hotplug.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:30 -07:00
Li Shaohua
0bb3184df5 [PATCH] init call cleanup
Trival patch for CPU hotplug.  In CPU identify part, only did cleaup for intel
CPUs.  Need do for other CPUs if they support S3 SMP.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:30 -07:00
Li Shaohua
d720803a93 [PATCH] sibling map initializing rework
Make sibling map init per-cpu.  Hotplug CPU may change the map at runtime.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
Li Shaohua
6fe940d6c3 [PATCH] sep initializing rework
Make SEP init per-cpu, so it is hotplug safe.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
Ashok Raj
67664c8f7e [PATCH] i386: Dont use IPI broadcast when using cpu hotplug.
This patch introduces a startup parameter no_broadcast.  When we enable
CONFIG_HOTPLUG_CPU, we dont want to use broadcast shortcut as it has ill
effects on a offline cpu.  If we issue broadcast, the IPI is also delivered
to offline cpus, or partially up cpu causing stale IPI's to be handled,
which is a problem and can cause undesirable effects.

Introduces a new startup cmdline option no_ipi_broadcast, that can be
switched at cmdline if necessary.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
Zwane Mwaikambo
f370513640 [PATCH] i386 CPU hotplug
(The i386 CPU hotplug patch provides infrastructure for some work which Pavel
is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua
<shaohua.li@intel.com> is doing)

The following provides i386 architecture support for safely unregistering and
registering processors during runtime, updated for the current -mm tree.  In
order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the
cpu_online check in do_IRQ() by modifying fixup_irqs().  The difference being
that on cpu offline, fixup_irqs() is called before we clear the cpu from
cpu_online_map and a long delay in order to ensure that we never have any
queued external interrupts on the APICs.  There are additional changes to s390
and ppc64 to account for this change.

1) Add CONFIG_HOTPLUG_CPU
2) disable local APIC timer on dead cpus.
3) Disable preempt around irq balancing to prevent CPUs going down.
4) Print irq stats for all possible cpus.
5) Debugging check for interrupts on offline cpus.
6) Hacky fixup_irqs() to redirect irqs when cpus go off/online.
7) play_dead() for offline cpus to spin inside.
8) Handle offline cpus set in flush_tlb_others().
9) Grab lock earlier in smp_call_function() to prevent CPUs going down.
10) Implement __cpu_disable() and __cpu_die().
11) Enable local interrupts in cpu_enable() after fixup_irqs()
12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus.
13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline.

Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
Shaohua Li
d92de65cab [PATCH] variable overflow after hundreds round of hotplug CPU
I'm doing the cpu hotplug stress test and found a variable ('ready') is
overflow after several hundreds rounds of cpu hotplug.  Here is a fix.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:28 -07:00
Shaohua Li
a13db56624 [PATCH] CPU hotplug: fix hpet sectioning
With hpet enabled, cpu hotplug uses some routines marked with __init.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:28 -07:00
Andrey Panin
1249c5138f [PATCH] dmi: spring cleanup
Whitespace and CodingStyle cleanup. No functionality changes.

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:28 -07:00
Andrey Panin
b625883f24 [PATCH] dmi: remove central blacklist
Since last dmi quirk looks useless (it just prints 404 compliant url) we can
finally remove central dmi blacklist.

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:28 -07:00
Andrey Panin
0f8133a8db [PATCH] dmi: move ACPI sleep quirk
This patch moves ACPI sleep quirk out of dmi_scan.c

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:28 -07:00
Andrey Panin
aea00143a8 [PATCH] dmi: move ACPI boot quirk
This patch moves ACPI boot quirks out of dmi_scan.c

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Michael Ellerman
856509d5da [PATCH] ppc64: Fix compile warnings in arch/ppc64/kernel/lparcfg.c
Stephen's patch to remove LparData.h missed an include in lparcfg.c This
fixes a few compile warnings.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Kumar Gala
2ec19faf61 [PATCH] ppc32: remove some unnecessary includes of bootmem.h
Continue the Good Fight:  Limit bootmem.h include creep.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Kumar Gala
3d9077afea [PATCH] ppc32: Remove FSL OCP support
Support for the OCP device model on Freescale (FSL) PPC's is no longer used.
All FSL PPC's that were using OCP have be converted to using the platform
device model.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Kumar Gala
33d9e9b56d [PATCH] ppc32: Add support for Freescale e200 (Book-E) core
The e200 core is a Book-E core (similar to e500) that has a unified L1 cache
and is not cache coherent on the bus.  The e200 core also adds a separate
exception level for debug exceptions.  Part of this patch helps to cleanup a
few cases that are true for all Freescale Book-E parts, not just e500.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:26 -07:00
Kumar Gala
62aa751d16 [PATCH] ppc32: Check return of ppc_sys_get_pdata before accessing pointer
Ensure that the returned pointer from ppc_sys_get_pdata is not NULL before we
start using it.  This handles any cases where we have variants of processors
on the same board with different functionality.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:26 -07:00
Yoichi Yuasa
b4819b5937 [PATCH] mips: add MIPS-specific support for flatmem/discontigmem
2.6.12-git6 doesn't boot on some MIPS machines.  They need the support of flat
memory and discontig memory.

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:25 -07:00
Russell King
7919a693bd [PATCH] Serial: remove unnecessary register_serial/unregister_serial
A couple of drivers declare register_serial/unregister_serial prototypes
but don't use them.  FRV contains a commented out call to register_serial.
Since these are deprecated, remove these unnecessary references.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:25 -07:00
Dave Jones
821fe94727 [PATCH] gcc4 compile fix for recent ia64 xpc changes
Gcc4 doesn't like volatile casts as lvalues.  Make the structure members
volatile instead.

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:25 -07:00
Dmitry Torokhov
e70c9d5e61 [PATCH] I8K: use standard DMI interface
I8K: Change to use stock dmi infrastructure instead of homegrown
     parsing code. The driver now requires box's DMI data to match
     list of supported models so driver can be safely compiled-in
     by default without fear of it poking into random SMM BIOS
     code. DMI checks can be ignored with i8k.ignore_dmi option.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:24 -07:00
Russell King
8749af6821 [PATCH] ARM: Generic Dynamic Tick Timer support for ARM, take 4
This patch adds support for Dynamic Tick Timer for ARM. Dynamic Tick is
also known as VST (Variable Scheduling Timeouts).

Dynamic Tick has been in use in the OMAP tree since last October.  The
patch is not intrusive, and does not do anything unless CONFIG_NO_IDLE_HZ
is defined.  This patch has the following fixed based on comments from
RMK:
- Time is updated before calling interrupt handlers.
- Added new interrupt flag SA_TIMER to avoid duplicate timer interrupts
- Moved struct dyn_tick_timer to time.h until we at some point probably
  have an arch independent dyn-tick.h
- Cleaned up testing for DYN_TICK_ENABLED in irq.c

 I've cleaned up this patch to fix some remaining issues:
 - Call the timer tick handler with irqs disabled, as it would be from
   a normal interrupt
 - if we have a dyn_tick, we better implement all methods.
 - generic timer_dyn_reprogram() call, to be called before sleeping
 - added command line option - "dyntick=" to allow boot-time control
   of this feature
    -- rmk

Signed-off-by: Tony Lindgren
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-25 19:39:45 +01:00
Lennert Buytenhek
321ab6a5fa [PATCH] ARM: 2752/1: disable ixp2000 PCI I/O software workaround on chips that don't need it
Patch from Lennert Buytenhek

The later ixp2000 models don't need the PCI I/O workaround that we
currently perform.  Add a config option to disable the workaround,
and panic on boot if a kernel without the workaround is booted on a
buggy chip.  As only pre-production ixp2000s need the workaround,
the default is for it not to be configured in.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-25 19:30:04 +01:00
Russell King
3cd9e19ebc [PATCH] ARM: Fix discontigmem
The merge of sparsemem broke ARM discontigmem.  Fix it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-25 19:29:34 +01:00
Lennert Buytenhek
8144f56bd1 [PATCH] ARM: 2751/1: ixp2000 gpio cleanup broke ixdp2800 build
Patch from Lennert Buytenhek

The ixp2000 gpio cleanup broke the ixdp2800 build as it moved some
gpio-related functions from arch/platform.h to arch/gpio.h and the
ixdp2x00 support code used those functions but didn't include the
latter header file.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-25 16:58:22 +01:00
Lennert Buytenhek
ea23d1ac7e [PATCH] ARM: 2750/1: add i2c platform device for enp2611 on-board i2c bus
Patch from Lennert Buytenhek

On the enp2611, GPIO 7 and 6 are connected to an on-board i2c bus that
attaches to the SODIMM module slot (for SPD) and an LM84 temperature
sensor.  Add a platform device for this i2c bus.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-25 16:58:21 +01:00
Lennert Buytenhek
456b6b863a [PATCH] ARM: 2749/1: update ixp2000 defconfigs to 2.6.12-git6
Patch from Lennert Buytenhek

Update the defconfigs for the ixp2000 platforms to 2.6.12-git6.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-25 16:58:21 +01:00
Catalin Marinas
79042f087b [PATCH] ARM: 2698/1: Enable kernel r/w access to user pages on ARMv6
Patch from Catalin Marinas

cpu_v6_set_pte() sets the kernel access rights to r/o for user
pages (L_PTE_USER) when neither L_PTE_WRITE nor L_PTE_DIRTY are
set. This causes a kernel data abort when writing the TLS value
in the 0xffff0000 page. This patch enables the kernel r/w access.

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-24 21:27:39 +01:00
Deepak Saxena
5932ae3f5d [PATCH] ARM: 2745/1: Fix IXP4xx debug macros
Patch from Deepak Saxena

Current IXP4xx debug macros do not work in the small window between
the MMU being enabled and the call to map_io() b/c the standard
peripheral mapping is not properly setup for use with the low-level
debug code. This patch creates a new section-aligned mapping for the
UART specifically for use with the debug macros.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-24 20:54:35 +01:00
Lennert Buytenhek
c4982887ca [PATCH] ARM: 2744/1: ixp2000 gpio irq support
Patch from Lennert Buytenhek

This patch cleans up the ixp2000 gpio irq code and implements the
set_irq_type method for gpio irqs so that users can select for which
events (falling edge/rising edge/level low/level high) on the gpio
pin they want the corresponding gpio irq to be triggered.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-24 20:54:35 +01:00
Chris Zankel
7282bee787 [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 8
The attached patches provides part 8 of an architecture implementation
for the Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:22 -07:00
Chris Zankel
3f65ce4d14 [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5
The attached patches provides part 5 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:22 -07:00
Chris Zankel
249ac17e96 [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 4
The attached patches provides part 4 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:21 -07:00
Chris Zankel
5a0015d626 [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3
The attached patches provides part 3 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:21 -07:00
Chris Zankel
4bedea9454 [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2
The attached patches provides part 2 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:21 -07:00
Chris Zankel
8e1a6dd2fd [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 1
The attached patches provides part 1 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:21 -07:00
Andrea Arcangeli
7286aa9b9a [PATCH] ppc64: fix seccomp with 32-bit userland
The seccomp check has to happen when entering the syscall and not when
exiting it or regs->gpr[0] contains garabge during signal handling in
ppc64_rt_sigreturn (this actually might be a bug too, but an orthogonal
one, since we really have to run the check before invoking the syscall and
not after it).

Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:18 -07:00
Linus Torvalds
adb7ee3746 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-06-23 17:19:56 -07:00
Ben Dooks
691027b91b [PATCH] ARM: 2730/1: S3C2410 default configuration update
Patch from Ben Dooks

Add support for the DM9000 and bring default configuration
up-to-date with the latest 2.6.12 kernel release

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 21:56:48 +01:00
Ben Dooks
d97a666f36 [PATCH] ARM: 2729/1: DM9000 platform support for S3C2410 machines (BAST, VR1000)
Patch from Ben Dooks

Add platform_device information for DM9000 chip(s) on the
Simtec BAST and the VR1000 board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 21:56:47 +01:00
Nicolas Pitre
c1241c4c3a [PATCH] ARM: 2722/1: remove reliance on udivdi3 for nwfpe
Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 21:56:46 +01:00
Linus Torvalds
24665cd00d Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-06-23 09:49:55 -07:00
Christoph Hellwig
9a59f452ab [PATCH] remove <linux/xattr_acl.h>
This file duplicates <linux/posix_acl_xattr.h>, using slightly different
names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:33 -07:00