Commit Graph

55 Commits

Author SHA1 Message Date
Vladimir Zapolskiy
4d3ac66624 clk: bcm2835: fix check of error code returned by devm_ioremap_resource()
The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails due to some reason.

The devm_ioremap_resource() function returns ERR_PTR() and never
returns NULL, which makes useless a following check for NULL.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: 5e63dcc74b ("clk: bcm2835: Add a driver for the auxiliary peripheral clock gates")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15 18:14:11 -07:00
Stephen Boyd
bd41aa6773 clk: bcm: Remove CLK_IS_ROOT
This flag is a no-op now. Remove usage of the flag.

Cc: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02 17:42:41 -08:00
Martin Sperl
2103a21561 clk: bcm2835: added missing clock register definitions
Added missing CTRL and DIV clock register definitions for:
PCM, SLIM, TCNT, TEC, TD0, TD1

Register information taken from:
https://rawgit.com/msperl/rpi-registers/master/rpi-registers.html#CM
which extracted the information from the header files shared by
Broadcom/rpi foundation in this file:
http://www.broadcom.com/docs/support/videocore/Brcm_Android_ICS_Graphics_Stack.tar.gz

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-25 16:07:59 -08:00
Michael Turquette
3aef66490d Merge branch 'clk-bcm2835' into clk-next 2016-02-16 12:31:51 -08:00
Eric Anholt
79c1e2fc2c clk: bcm2835: Reuse CLK_DIVIDER_MAX_AT_ZERO for recalc_rate()
We were rolling this ourselves, but clk-divider can do it now.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-02-16 12:30:09 -08:00
Eric Anholt
773b3966dd clk: bcm2835: Fix setting of PLL divider clock rates
Our dividers weren't being set successfully because CM_PASSWORD wasn't
included in the register write.  It looks easier to just compute the
divider to write ourselves than to update clk-divider for the ability
to OR in some arbitrary bits on write.

Fixes about half of the video modes on my HDMI monitor (everything
except 720x400).

Cc: stable@vger.kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-02-16 12:30:07 -08:00
Ray Jui
df416e565d clk: iproc: Remove __init from header
Remove __init macro from all function prototypes in clk-iproc.h

Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29 16:31:40 -08:00
Simran Rai
bcd8be1398 clk: iproc: Add support for Cygnus audio clocks
This patch adds support for Broadcom Cygnus audio PLL and leaf
clocks

Signed-off-by: Simran Rai <ssimran@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29 16:31:38 -08:00
Michael Turquette
82d0f8bc4b Merge branch 'clk-bcm2835' into clk-next 2015-12-24 20:39:02 -08:00
Remi Pommarel
cfbab8fbab clk: bcm2835: Add PWM clock support
Register the pwm clock for bcm2835.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-24 20:38:38 -08:00
Remi Pommarel
6d18b8adbe clk: bcm2835: Support for clock parent selection
Some bcm2835 clocks used by hardware (like "PWM" or "H264") can have multiple
parent clocks. These clocks divide the rate of a parent which can be selected by
setting the proper bits in the clock control register.

Previously all these parents where handled by a mux clock. But a mux clock
cannot be used because updating clock control register to select parent needs a
password to be xor'd with the parent index.

This patch get rid of mux clock and make these clocks handle their own parent,
allowing them to select the one to use.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-24 20:38:30 -08:00
Remi Pommarel
9c95b32ca0 clk: bcm2835: add a round up ability to the clock divisor
Make bcm2835_clock_choose_div to optionally round up the chosen MASH divisor
so that the resulting average rate will not be higher than the requested one.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-24 20:38:06 -08:00
Michael Turquette
ce6dd266d5 Merge branch 'clk-bcm2835' into clk-next 2015-12-22 16:49:38 -08:00
Eric Anholt
5e63dcc74b clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.
There are a pair of SPI masters and a mini UART that were last minute
additions.  As a result, they didn't get integrated in the same way as
the other gates off of the VPU clock in CPRMAN.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 16:47:17 -08:00
Florian Fainelli
addc3ba666 clk: bcm: Add BCM63138 clock support
BCM63138 has a simple clocking domain which is primarily the ARMPLL
clocking complex, from which the ARM (CPU), APB and AXI clocks would be
derived from.

Since the ARMPLL controller is entirely compatible with the iProc ARM
PLL, we just initialize it without additional parameters.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-20 15:46:27 -08:00
Stephen Boyd
f63d19ef52 Merge branch 'clk-iproc' into clk-next
* clk-iproc:
  clk: iproc: define Broadcom NS2 iProc clock binding
  clk: iproc: define Broadcom NSP iProc clock binding
  clk: ns2: add clock support for Broadcom Northstar 2 SoC
  clk: iproc: Separate status and control variables
  clk: iproc: Split off dig_filter
  clk: iproc: Add PLL base write function
  clk: nsp: add clock support for Broadcom Northstar Plus SoC
  clk: iproc: Add PWRCTRL support
  clk: cygnus: Convert all macros to all caps
  ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled
2015-10-21 17:28:19 -07:00
Jon Mason
f7225a832d clk: ns2: add clock support for Broadcom Northstar 2 SoC
The Broadcom Northstar 2 SoC is architected under the iProc
architecture. It has the following PLLs: GENPLL SCR, GENPLL SW,
LCPLL DDR, LCPLL Ports, all derived from an onboard crystal.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 17:22:58 -07:00
Jon Mason
40c8bec3f2 clk: iproc: Separate status and control variables
Some PLLs have separate registers for Status and Control.  The means the
pll_base needs to be split into 2 new variables, so that those PLLs can
specify device tree registers for those independently.  Also, add a new
driver flag to identify this presence of the split, and let the driver
know that additional registers need to be used.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 17:03:41 -07:00
Jon Mason
f713c6bf32 clk: iproc: Split off dig_filter
The PLL loop filter/gain can be located in a separate register on some
SoCs.  Split these off into a separate variable, so that an offset can
be added if necessary.  Also, make the necessary modifications to the
Cygnus and NSP drivers for this change.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 17:02:57 -07:00
Jon Mason
7968d24107 clk: iproc: Add PLL base write function
All writes to the PLL base address must be flushed if the
IPROC_CLK_NEEDS_READ_BACK flag is set.  If we add a function to make the
necessary write and reads, we can make sure that any future code which
makes PLL base writes will do the correct thing.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 17:02:14 -07:00
Jon Mason
5f024b0685 clk: nsp: add clock support for Broadcom Northstar Plus SoC
The Broadcom Northstar Plus SoC is architected under the iProc
architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
derived from an onboard crystal.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 16:53:20 -07:00
Jon Mason
01b6722fdf clk: iproc: Add PWRCTRL support
Some iProc SoC clocks use a different way to control clock power, via
the PWRDWN bit in the PLL control register.  Since the PLL control
register is used to access the PWRDWN bit, there is no need for the
pwr_base when this is being used.  A new flag, IPROC_CLK_EMBED_PWRCTRL,
has been added to identify this usage.  We can use the AON interface to
write the values to enable/disable PWRDOWN.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
[sboyd@codeaurora.org: Remove useless parentheses]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 16:53:15 -07:00
Jon Mason
2dfc8a27ec clk: cygnus: Convert all macros to all caps
The macros that are being used to initialize the values of the clk
structures should be all caps.  Find and replace all of them with their
relevant counterparts.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 16:53:10 -07:00
Arnd Bergmann
1e9bc9d636 ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled
When CONFIG_CYGNUS is set but CONFIG_COMMON_CLK_IPROC is disabled, the
following link failures are caused:

drivers/built-in.o: In function `cygnus_armpll_init':
:(.init.text+0x1d290): undefined reference to `iproc_armpll_setup'
drivers/built-in.o: In function `cygnus_genpll_clk_init':
:(.init.text+0x1d2c4): undefined reference to `iproc_pll_clk_setup'
drivers/built-in.o: In function `cygnus_lcpll0_clk_init':
:(.init.text+0x1d304): undefined reference to `iproc_pll_clk_setup'
drivers/built-in.o: In function `cygnus_mipipll_clk_init':
:(.init.text+0x1d344): undefined reference to `iproc_pll_clk_setup'
drivers/built-in.o: In function `cygnus_asiu_init':
:(.init.text+0x1d370): undefined reference to `iproc_asiu_setup'

It is fixed it by always selecting COMMON_CLK_IPROC from
ARCH_BCM_IPROC, and making COMMON_CLK_IPROC a silent option (thus
preventing it from being erroneously disabled by a user).

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 16:52:57 -07:00
Simran Rai
63243a4da7 clk: iproc: Fix PLL output frequency calculation
This patch affects the clocks that use fractional ndivider in their
PLL output frequency calculation. Instead of 2^20 divide factor, the
clock's ndiv integer shift was used. Fixed the bug by replacing ndiv
integer shift with 2^20 factor.

Signed-off-by: Simran Rai <ssimran@broadcom.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-10-21 02:43:57 -07:00
Javier Martinez Canillas
4a7748c3d6 clk: Allow drivers to build if COMPILE_TEST is enabled
These drivers only have runtime but no build time dependencies so can be
built for testing purposes if the Kconfig COMPILE_TEST option is enabled.

This is useful to have more build coverage and make sure that drivers are
not affected by changes that could cause build regressions.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-16 11:58:53 -07:00
Eric Anholt
41691b8862 clk: bcm2835: Add support for programming the audio domain clocks
This adds support for enabling, disabling, and setting the rate of the
audio domain clocks.  It will be necessary for setting the pixel clock
for HDMI in the VC4 driver and let us write a cpufreq driver.  It will
also improve compatibility with user changes to the firmware's
config.txt, since our previous fixed clocks are unaware of it.

The firmware also has support for configuring the clocks through the
mailbox channel, but the pixel clock setup by the firmware doesn't
work, and it's Raspberry Pi specific anyway.  The only conflicts we
should have with the firmware would be if we made firmware calls that
result in clock management (like opening firmware V3D or ISP access,
which we don't support in upstream), or on hardware over-thermal or
under-voltage (when the firmware would rewrite PLLB to take the ARM
out of overclock).  If that happens, our cached .recalc_rate() results
would be incorrect, but that's no worse than our current state where
we used fixed clocks.

The existing fixed clocks in the code are left in place to provide
backwards compatibility with old device tree files.

Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-12 11:32:02 -07:00
Eric Anholt
4f61d8e220 clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
clk-bcm2835.c predates the drivers under bcm/, but all the new BCM
drivers are going in there so let's follow them.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 17:12:03 -07:00
Stephen Boyd
6f220c2243 clk: bcm: Convert to clk_hw based provider APIs
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.

Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:48:48 -07:00
Stephen Boyd
9cfad9bc47 Merge branch 'cleanup-clk-h-includes' into clk-next
* cleanup-clk-h-includes: (62 commits)
  clk: Remove clk.h from clk-provider.h
  clk: h8300: Remove clk.h and clkdev.h includes
  clk: at91: Include clk.h and slab.h
  clk: ti: Switch clk-provider.h include to clk.h
  clk: pistachio: Include clk.h
  clk: ingenic: Include clk.h
  clk: si570: Include clk.h
  clk: moxart: Include clk.h
  clk: cdce925: Include clk.h
  clk: Include clk.h in clk.c
  clk: zynq: Include clk.h
  clk: ti: Include clk.h
  clk: sunxi: Include clk.h and remove unused clkdev.h includes
  clk: st: Include clk.h
  clk: qcom: Include clk.h
  clk: highbank: Include clk.h
  clk: bcm: Include clk.h
  clk: versatile: Remove clk.h and clkdev.h includes
  clk: ux500: Remove clk.h and clkdev.h includes
  clk: tegra: Properly include clk.h
  ...
2015-07-28 11:59:09 -07:00
Stephen Boyd
19aab27308 Merge branch 'clk-determine-rate-struct' into clk-next
* clk-determine-rate-struct:
  clk: fix some determine_rate implementations
  clk: change clk_ops' ->determine_rate() prototype
2015-07-28 11:51:30 -07:00
Boris Brezillon
0817b62cc0 clk: change clk_ops' ->determine_rate() prototype
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27 18:12:01 -07:00
Stephen Boyd
d4945ab647 clk: bcm: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:21 -07:00
Ray Jui
69916d9609 clk: iproc: fix bit manipulation arithmetic
A 32-bit variable should be type casted to 64-bit before arithmetic
operation and assigning it to a 64-bit variable

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02 09:51:09 -07:00
Ray Jui
45a481c217 clk: iproc: fix memory leak from clock name
of_property_read_string_index takes array of pointers and assign them to
strings read from device tree property. No additional memory allocation
is needed prior to calling of_property_read_string_index. In fact, since
the array of pointers will be re-assigned to other strings, any memory
that it points to prior to calling of_property_read_string_index will be
leaked

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02 09:50:26 -07:00
Ray Jui
61ca7b0c7f clk: cygnus: add clock support for Broadcom Cygnus
The Broadcom Cygnus SoC is architected under the iProc architecture. It
has the following PLLs: ARMPLL, GENPLL, LCPLL0, MIPIPLL, all dervied
from an onboard crystal. Cygnus also has various ASIU clocks that are
derived directly from the onboard crystal.

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 12:36:39 -07:00
Ray Jui
5fe225c105 clk: iproc: add initial common clock support
This adds basic and generic support for various iProc PLLs and clocks
including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks.

SoCs under the iProc architecture can define their specific register
offsets and clock parameters for their PLL and clock controllers. These
parameters can be passed as arugments into the generic iProc PLL and
clock setup functions

Derived from code originally provided by Jonathan Richardson
<jonathar@broadcom.com>

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 12:36:38 -07:00
Stephen Boyd
7926b3f8c6 clk: bcm/kona: Remove ccu_list
This list doesn't look to be used. Let's remove it and any
associated code that would be manipulating this list. This also
silences this error:

drivers/clk/bcm/clk-kona-setup.c:24:1: warning: symbol 'ccu_list' was not declared. Should it be static?

Reviewed-by: Alex Elder <elder@linaro.org>
Cc: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:20 -07:00
Stephen Boyd
4cca1be4bc clk: bcm/kona: Silence sparse warnings
drivers/clk/bcm/clk-kona.c:1243:16: warning: odd constant _Bool cast (ffffffffffffffea becomes 1)

Reviewed-by: Alex Elder <elder@linaro.org>
Cc: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:19 -07:00
Javi Merino
aa7762010a clk: bcm/kona: use DIV_ROUND_CLOSEST_ULL()
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal
implementation and use the kernel one.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:03:55 -04:00
Tomeu Vizoso
1c8e600440 clk: Add rate constraints to clocks
Adds a way for clock consumers to set maximum and minimum rates. This
can be used for thermal drivers to set minimum rates, or by misc.
drivers to set maximum rates to assure a minimum performance level.

Changes the signature of the determine_rate callback by adding the
parameters min_rate and max_rate.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[sboyd@codeaurora.org: set req_rate in __clk_init]
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate
                        migrated clk-private.h changes to clk.c]
2015-02-02 14:23:42 -08:00
Tomeu Vizoso
646cafc6aa clk: Change clk_ops->determine_rate to return a clk_hw as the best parent
This is in preparation for clock providers to not have to deal with struct clk.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03 16:21:37 -08:00
Alex Elder
c2152d0e4d clk: bcm/kona: implement determine_rate()
Implement the clk->determine_rate method for Broadcom Kona peripheral
clocks.  This allows a peripheral clock to be re-parented in order to
satisfy a rate change request.  This takes the place of the previous
kona_peri_clk_round_rate() functionality, though that function remains
because it is used by the new one.

The parent clock that allows the peripheral clock to produce a rate
closest to the one requested is the one selected, though the current
parent is used by default.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-27 17:34:32 -07:00
Alex Elder
7d3723ba8c clk: bcm21664: use common clock framework
Define the set of CCUs and provided clocks sufficient to satisfy the
needs of all the existing clock references for BCM21664.  Replace
the "fake" fixed-rate clocks used previously with "real" ones.

Note that only the minimal set of these clocks and CCUs is defined
here.  More clock definitions will need to be added as required by
the addition of additional drivers.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:44 -07:00
Alex Elder
0bdab78ba6 clk: bcm281xx: move compatible string definitions
The Broadcom 281xx clock code uses a #define for the compatible
string for it's clock control units (CCUs).  Rather than defining
those in the C source file, define them in the header file that's
shared by both the code and the device tree source file (along with
all the clock ids).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:39 -07:00
Alex Elder
dc613840a6 clk: bcm281xx: add clock hysteresis support
Add support for clock gate hysteresis control.  For now, if it's
defined for a clock, it's enabled.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:38 -07:00
Alex Elder
a597faccc7 clk: bcm281xx: add clock policy support
Add support for CCU policy engine control, and also for setting the
mask bits for bus clocks that require a policy change to get
activated.  This includes adding validity checking framework for
CCUs, to validate the policy fields if defined.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:36 -07:00
Alex Elder
03548ec06a clk: bcm281xx: define CCU clock data statically
Rather than "manually" setting up each CCU's clock entries at run
time, define a flexible array of generic Kona clock structures
within the CCU structure itself.  Each of these entries contains
generic kona clock information (like its CCU pointer and clock
framework initialization data).  Each also has a pointer to a
structure contianing clock type-dependent initialization data
(like register definitions).

Since we'll iterate over these arrays we need to be sure they have
slots for all potential clock index values.  (E.g. for the root CCU
we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.)  To
ensure this we always define an extra entry and fill it using the
special initializer LAST_KONA_CLK.

Just about everything we need to know about a clock can be defined
statically.  As a result, kona_clk_setup() can be changed to take
just a kona_clk structure as its argument, and peri_clk_setup() can
be simplified.  With the information pre-defined we are also able
to handle most clock setup genericially.  We can do away with the
CCU-specific callback functions that previously were needed to set
up the entries in CCU's clock array.

Move the definition of the ccu_data structure down in "clk-kona.h"
to avoid a forward dependency.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:35 -07:00
Alex Elder
b12151ca5c clk: bcm281xx: initialize CCU structures statically
We know up front how many CCU's we'll support, so there's no need to
allocate their data structures dynamically.  Define a macro
KONA_CCU_COMMON() to simplify the initialization of many of the
fields in a ccu_data structure.  Pass the address of a statically
defined CCU structure to kona_dt_ccu_setup() rather than having that
function allocate one.

We also know at build time how many clocks a given CCU will provide,
though the number of of them for each CCU is different.  Record the
number of clocks we need in the CCU's clk_onecell_data struct
(which is used when we register the CCU with the common clock code
as a clock provider).  Rename that struct field "clk_data" (because
"data" alone gets a little confusing).

Use the known clock count to move the allocation of each CCU's
clocks array into ccu_clks_setup() rather than having each CCU's
setup callback function do it.

(The real motivation behind all of this is that we'll be doing some
static initialization of some additional CCU-specific data soon.)

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:33 -07:00
Alex Elder
9d3d87c750 clk: bcm281xx: change some symbol names
As I developed the bcm281xx clock code I understood there were
restrictions on device tree "compatible" strings names, and as a
result "bcm11351" was used in places despite the part family being
more properly called "bcm281xx".  This can be a little confusing.

In some cases I went to far and things using "bcm11351" when that
was not necessary.

This patch remedies this.  It renames the symbol used to define the
"compatible" string (but not its value) so it uses "BCM281XX".
Similarly, the name names provided to the CLK_OF_DECLARE() macro
are changed, hoping to minimize the number of places that the
confusing "11351" string is used.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:32 -07:00