Commit Graph

642 Commits

Author SHA1 Message Date
Jeremy Fitzhardinge
c5413fbe89 [PATCH] i386: Fix UP gdt bugs
Fixes two problems with the GDT when compiling for uniprocessor:
 - There's no percpu segment, so trying to load its selector into %fs fails.
   Use a null selector instead.
 - The real gdt needs to be loaded at some point.  Do it in cpu_init().

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
1956c73bb5 [PATCH] i386: Define per_cpu_offset
Define per_cpu_offset in asm-i386/percpu.h when SMP defined, like
asm-generic/percpu.h does for UP.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
978c038ec9 [PATCH] i386: cleanups to help using per-cpu variables from asm
This patch does a few small cleanups:
 - use PER_CPU_NAME to generate the names of per-cpu variables
 - use lea to add the per_cpu offset in PER_CPU(), because it doesn't
   affect condition flags
 - add PER_CPU_VAR which allows direct access to pre-cpu variables
   with the %fs: prefix on SMP.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
7c3576d261 [PATCH] i386: Convert PDA into the percpu section
Currently x86 (similar to x84-64) has a special per-cpu structure
called "i386_pda" which can be easily and efficiently referenced via
the %fs register.  An ELF section is more flexible than a structure,
allowing any piece of code to use this area.  Indeed, such a section
already exists: the per-cpu area.

So this patch:
(1) Removes the PDA and uses per-cpu variables for each current member.
(2) Replaces the __KERNEL_PDA segment with __KERNEL_PERCPU.
(3) Creates a per-cpu mirror of __per_cpu_offset called this_cpu_off, which
    can be used to calculate addresses for this CPU's variables.
(4) Simplifies startup, because %fs doesn't need to be loaded with a
    special segment at early boot; it can be deferred until the first
    percpu area is allocated (or never for UP).

The result is less code and one less x86-specific concept.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
7a61d35d4b [PATCH] i386: Page-align the GDT
Xen wants a dedicated page for the GDT.  I believe VMI likes it too.
lguest, KVM and native don't care.

Simple transformation to page-aligned "struct gdt_page".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
4cdd9c8931 [PATCH] i386: PARAVIRT: drop unused ptep_get_and_clear
In shadow mode hypervisors, ptep_get_and_clear achieves the desired
purpose of keeping the shadows in sync by issuing a native_get_and_clear,
followed by a call to pte_update, which indicates the PTE has been
modified.

Direct mode hypervisors (Xen) have no need for this anyway, and will trap
the update using writable pagetables.

This means no hypervisor makes use of ptep_get_and_clear; there is no
reason to have it in the paravirt-ops structure.  Change confusing
terminology about raw vs. native functions into consistent use of
native_pte_xxx for operations which do not invoke paravirt-ops.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
1a45b7aaa5 [PATCH] i386: PARAVIRT: Clean up paravirt patchable wrappers
Replace all the open-coded macros for generating calls with a pair of
more general macros (__PVOP_CALL/VCALL), and redefine all the
PVOP_V?CALL[0-4] in terms of them.

[ Andrew, Andi: this should slot in immediately after "Document asm-i386/paravirt.h"
  (paravirt_ops-document-asm-i386-paravirth.patch) ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
4e0fa85602 [PATCH] i386: PARAVIRT: Use enums for paravirt lazy flush modi
Remove #defines, add enum for PARAVIRT_LAZY_FLUSH.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
ce6234b529 [PATCH] i386: PARAVIRT: add kmap_atomic_pte for mapping highpte pages
Xen and VMI both have special requirements when mapping a highmem pte
page into the kernel address space.  These can be dealt with by adding
a new kmap_atomic_pte() function for mapping highptes, and hooking it
into the paravirt_ops infrastructure.

Xen specifically wants to map the pte page RO, so this patch exposes a
helper function, kmap_atomic_prot, which maps the page with the
specified page protections.

This also adds a kmap_flush_unused() function to clear out the cached
kmap mappings.  Xen needs this to clear out any potential stray RW
mappings of pages which will become part of a pagetable.

[ Zach - vmi.c will need some attention after this patch.  It wasn't
  immediately obvious to me what needs to be done. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
a27fe809b8 [PATCH] i386: PARAVIRT: revert map_pt_hook.
Back out the map_pt_hook to clear the way for kmap_atomic_pte.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
d4c104771a [PATCH] i386: PARAVIRT: add flush_tlb_others paravirt_op
This patch adds a pv_op for flush_tlb_others.  Linux running on native
hardware uses cross-CPU IPIs to flush the TLB on any CPU which may
have a particular mm's pagetable entries cached in its TLB.  This is
inefficient in a paravirtualized environment, since the hypervisor
knows which real CPUs actually contain cached mappings, which may be a
small subset of a guest's VCPUs.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
63f70270cc [PATCH] i386: PARAVIRT: add common patching machinery
Implement the actual patching machinery.  paravirt_patch_default()
contains the logic to automatically patch a callsite based on a few
simple rules:

 - if the paravirt_op function is paravirt_nop, then patch nops
 - if the paravirt_op function is a jmp target, then jmp to it
 - if the paravirt_op function is callable and doesn't clobber too much
    for the callsite, call it directly

paravirt_patch_default is suitable as a default implementation of
paravirt_ops.patch, will remove most of the expensive indirect calls
in favour of either a direct call or a pile of nops.

Backends may implement their own patcher, however.  There are several
helper functions to help with this:

paravirt_patch_nop	nop out a callsite
paravirt_patch_ignore	leave the callsite as-is
paravirt_patch_call	patch a call if the caller and callee
			have compatible clobbers
paravirt_patch_jmp	patch in a jmp
paravirt_patch_insns	patch some literal instructions over
			the callsite, if they fit

This patch also implements more direct patches for the native case, so
that when running on native hardware many common operations are
implemented inline.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
294688c028 [PATCH] i386: PARAVIRT: Document asm-i386/paravirt.h
Clean things up, and broadly document:
 - the paravirt_ops functions themselves
 - the patching mechanism

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
f8822f4201 [PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
Wrap a set of interesting paravirt_ops calls in a wrapper which makes
the callsites available for patching.  Unfortunately this is pretty
ugly because there's no way to get gcc to generate a function call,
but also wrap just the callsite itself with the necessary labels.

This patch supports functions with 0-4 arguments, and either void or
returning a value.  64-bit arguments must be split into a pair of
32-bit arguments (lower word first).  Small structures are returned in
registers.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
42c24fa22e [PATCH] i386: PARAVIRT: Fix patch site clobbers to include return register
Fix a few clobbers to include the return register.  The clobbers set
is the set of all registers modified (or may be modified) by the code
snippet, regardless of whether it was deliberate or accidental.

Also, make sure that callsites which are used in contexts which don't
allow clobbers actually save and restore all clobberable registers.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
d582203578 [PATCH] i386: PARAVIRT: Use patch site IDs computed from offset in paravirt_ops structure
Use patch type identifiers derived from the offset of the operation in
the paravirt_ops structure.  This avoids having to maintain a separate
enum for patch site types.

Also, since the identifier is derived from the offset into
paravirt_ops, the offset can be derived from the identifier.  This is
used to remove replicated information in the various callsite macros,
which has been a source of bugs in the past.

This patch also drops the fused save_fl+cli operation, which doesn't
really add much and makes things more complex - specifically because
it breaks the 1:1 relationship between identifiers and offsets.  If
this operation turns out to be particularly beneficial, then the right
answer is to define a new entrypoint for it.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
98de032b68 [PATCH] i386: PARAVIRT: rename struct paravirt_patch to paravirt_patch_site for clarity
Rename struct paravirt_patch to paravirt_patch_site, so that it
clearly refers to a callsite, and not the patch which may be applied
to that callsite.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
d6dd61c831 [PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destruction
Add hooks to allow a paravirt implementation to track the lifetime of
an mm.  Paravirtualization requires three hooks, but only two are
needed in common code.  They are:

arch_dup_mmap, which is called when a new mmap is created at fork

arch_exit_mmap, which is called when the last process reference to an
  mm is dropped, which typically happens on exit and exec.

The third hook is activate_mm, which is called from the arch-specific
activate_mm() macro/function, and so doesn't need stub versions for
other architectures.  It's called when an mm is first used.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: linux-arch@vger.kernel.org
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Jeremy Fitzhardinge
5311ab62cd [PATCH] i386: PARAVIRT: Allow paravirt backend to choose kernel PMD sharing
Normally when running in PAE mode, the 4th PMD maps the kernel address space,
which can be shared among all processes (since they all need the same kernel
mappings).

Xen, however, does not allow guests to have the kernel pmd shared between page
tables, so parameterize pgtable.c to allow both modes of operation.

There are several side-effects of this.  One is that vmalloc will update the
kernel address space mappings, and those updates need to be propagated into
all processes if the kernel mappings are not intrinsically shared.  In the
non-PAE case, this is done by maintaining a pgd_list of all processes; this
list is used when all process pagetables must be updated.  pgd_list is
threaded via otherwise unused entries in the page structure for the pgd, which
means that the pgd must be page-sized for this to work.

Normally the PAE pgd is only 4x64 byte entries large, but Xen requires the PAE
pgd to page aligned anyway, so this patch forces the pgd to be page
aligned+sized when the kernel pmd is unshared, to accomodate both these
requirements.

Also, since there may be several distinct kernel pmds (if the user/kernel
split is below 3G), there's no point in allocating them from a slab cache;
they're just allocated with get_free_page and initialized appropriately.  (Of
course the could be cached if there is just a single kernel pmd - which is the
default with a 3G user/kernel split - but it doesn't seem worthwhile to add
yet another case into this code).

[ Many thanks to wli for review comments. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Christoph Lameter <clameter@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
90caccb975 [PATCH] i386: PARAVIRT: Allocate a fixmap slot
Allocate a fixmap slot for use by a paravirt_ops implementation.  This
is intended for early-boot bootstrap mappings.  Once the zones and
allocator have been set up, it would be better to use get_vm_area() to
allocate some virtual space.

Xen uses this to map the hypervisor's shared info page, which doesn't
have a pseudo-physical page number, and therefore can't be mapped
ordinarily.  It is needed early because it contains the vcpu state,
including the interrupt mask.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
b239fb2501 [PATCH] i386: PARAVIRT: Hooks to set up initial pagetable
This patch introduces paravirt_ops hooks to control how the kernel's
initial pagetable is set up.

In the case of a native boot, the very early bootstrap code creates a
simple non-PAE pagetable to map the kernel and physical memory.  When
the VM subsystem is initialized, it creates a proper pagetable which
respects the PAE mode, large pages, etc.

When booting under a hypervisor, there are many possibilities for what
paging environment the hypervisor establishes for the guest kernel, so
the constructon of the kernel's pagetable depends on the hypervisor.

In the case of Xen, the hypervisor boots the kernel with a fully
constructed pagetable, which is already using PAE if necessary.  Also,
Xen requires particular care when constructing pagetables to make sure
all pagetables are always mapped read-only.

In order to make this easier, kernel's initial pagetable construction
has been changed to only allocate and initialize a pagetable page if
there's no page already present in the pagetable.  This allows the Xen
paravirt backend to make a copy of the hypervisor-provided pagetable,
allowing the kernel to establish any more mappings it needs while
keeping the existing ones.

A slightly subtle point which is worth highlighting here is that Xen
requires all kernel mappings to share the same pte_t pages between all
pagetables, so that updating a kernel page's mapping in one pagetable
is reflected in all other pagetables.  This makes it possible to
allocate a page and attach it to a pagetable without having to
explicitly enumerate that page's mapping in all pagetables.

And:

+From: "Eric W. Biederman" <ebiederm@xmission.com>

If we don't set the leaf page table entries it is quite possible that
will inherit and incorrect page table entry from the initial boot
page table setup in head.S.  So we need to redo the effort here,
so we pick up PSE, PGE and the like.

Hypervisors like Xen require that their page tables be read-only,
which is slightly incompatible with our low identity mappings, however
I discussed this with Jeremy he has modified the Xen early set_pte
function to avoid problems in this area.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: William Irwin <bill.irwin@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
3dc494e86d [PATCH] i386: PARAVIRT: Add pagetable accessors to pack and unpack pagetable entries
Add a set of accessors to pack, unpack and modify page table entries
(at all levels).  This allows a paravirt implementation to control the
contents of pgd/pmd/pte entries.  For example, Xen uses this to
convert the (pseudo-)physical address into a machine address when
populating a pagetable entry, and converting back to pphys address
when an entry is read.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
4587623360 [PATCH] i386: PARAVIRT: use paravirt_nop to consistently mark no-op operations
Add a _paravirt_nop function for use as a stub for no-op operations,
and paravirt_nop #defined void * version to make using it easier
(since all its uses are as a void *).

This is useful to allow the patcher to automatically identify noop
operations so it can simply nop out the callsite.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
[mingo] but only as a cleanup of the current open-coded (void *) casts.
My problem with this is that it loses the types. Not that there is much
to check for, but still, this adds some assumptions about how function
calls look like
2007-05-02 19:27:13 +02:00
Rusty Russell
a75c54f933 [PATCH] i386: i386 separate hardware-defined TSS from Linux additions
On Thu, 2007-03-29 at 13:16 +0200, Andi Kleen wrote:
> Please clean it up properly with two structs.

Not sure about this, now I've done it.  Running it here.

If you like it, I can do x86-64 as well.

==
lguest defines its own TSS struct because the "struct tss_struct"
contains linux-specific additions.  Andi asked me to split the struct
in processor.h.

Unfortunately it makes usage a little awkward.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
d0175ab644 [PATCH] i386: Remove smp_alt_instructions
The .smp_altinstructions section and its corresponding symbols are
completely unused, so remove them.

Also, remove stray #ifdef __KENREL__ in asm-i386/alternative.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:13 +02:00
H. Peter Anvin
4bc5aa91fb [PATCH] x86: Clean up x86 control register and MSR macros (corrected)
This patch is based on Rusty's recent cleanup of the EFLAGS-related
macros; it extends the same kind of cleanup to control registers and
MSRs.

It also unifies these between i386 and x86-64; at least with regards
to MSRs, the two had definitely gotten out of sync.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:12 +02:00
Andi Kleen
f039b75471 [PATCH] x86: Don't use MWAIT on AMD Family 10
It doesn't put the CPU into deeper sleep states, so it's better to use the standard
idle loop to save power. But allow to reenable it anyways for benchmarking.

I also removed the obsolete idle=halt on i386

Cc: andreas.herrmann@amd.com

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:12 +02:00
Jeremy Fitzhardinge
1dbf527c51 [PATCH] i386: Make COMPAT_VDSO runtime selectable.
Now that relocation of the VDSO for COMPAT_VDSO users is done at
runtime rather than compile time, it is possible to enable/disable
compat mode at runtime.

This patch allows you to enable COMPAT_VDSO mode with "vdso=2" on the
kernel command line, or via sysctl.  (Switching on a running system
shouldn't be done lightly; any process which was relying on the compat
VDSO will be upset if it goes away.)

The COMPAT_VDSO config option still exists, but if enabled it just
makes vdso_enabled default to VDSO_COMPAT.

+From: Hugh Dickins <hugh@veritas.com>

Fix oops from i386-make-compat_vdso-runtime-selectable.patch.

Even mingetty at system startup finds it easy to trigger an oops
while reading /proc/PID/maps: though it has a good hold on the mm
itself, that cannot stop exit_mm() from resetting tsk->mm to NULL.

(It is usually show_map()'s call to get_gate_vma() which oopses,
and I expect we could change that to check priv->tail_vma instead;
but no matter, even m_start()'s call just after get_task_mm() is racy.)

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: "Jan Beulich" <JBeulich@novell.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
2007-05-02 19:27:12 +02:00
Jeremy Fitzhardinge
d4f7a2c18e [PATCH] i386: Relocate VDSO ELF headers to match mapped location with COMPAT_VDSO
Some versions of libc can't deal with a VDSO which doesn't have its
ELF headers matching its mapped address.  COMPAT_VDSO maps the VDSO at
a specific system-wide fixed address.  Previously this was all done at
build time, on the grounds that the fixed VDSO address is always at
the top of the address space.  However, a hypervisor may reserve some
of that address space, pushing the fixmap address down.

This patch does the adjustment dynamically at runtime, depending on
the runtime location of the VDSO fixmap.

[ Patch has been through several hands: Jan Beulich wrote the orignal
  version; Zach reworked it, and Jeremy converted it to relocate phdrs
  as well as sections. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: "Jan Beulich" <JBeulich@novell.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
2007-05-02 19:27:12 +02:00
Jeremy Fitzhardinge
a6c4e076ee [PATCH] i386: clean up identify_cpu
identify_cpu() is used to identify both the boot CPU and secondary
CPUs, but it performs some actions which only apply to the boot CPU.
Those functions are therefore really __init functions, but because
they're called by identify_cpu(), they must be marked __cpuinit.

This patch splits identify_cpu() into identify_boot_cpu() and
identify_secondary_cpu(), and calls the appropriate init functions
from each.  Also, identify_boot_cpu() and all the functions it
dominates are marked __init.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:12 +02:00
Jeremy Fitzhardinge
1353ebb4b4 [PATCH] i386: Clean up asm-i386/bugs.h
Most of asm-i386/bugs.h is code which should be in a C file, so put it there.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 19:27:12 +02:00
Jan Beulich
b92e9fac40 [PATCH] x86: fix amd64-agp aperture validation
Under CONFIG_DISCONTIGMEM, assuming that a !pfn_valid() implies all
subsequent pfn-s are also invalid is wrong. Thus replace this by
explicitly checking against the E820 map.

AK: make e820 on x86-64 not initdata

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
2007-05-02 19:27:11 +02:00
Jeremy Fitzhardinge
07f3331c6b [PATCH] i386: Add machine_ops interface to abstract halting and rebooting
machine_ops is an interface for the machine_* functions defined in
<linux/reboot.h>.  This is intended to allow hypervisors to intercept
the reboot process, but it could be used to implement other x86
subarchtecture reboots.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Jeremy Fitzhardinge
01a2f43556 [PATCH] i386: Add smp_ops interface
Add a smp_ops interface.  This abstracts the API defined by
<linux/smp.h> for use within arch/i386.  The primary intent is that it
be used by a paravirtualizing hypervisor to implement SMP, but it
could also be used by non-APIC-using sub-architectures.

This is related to CONFIG_PARAVIRT, but is implemented unconditionally
since it is simpler that way and not a highly performance-sensitive
interface.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-05-02 19:27:11 +02:00
Rusty Russell
4fbb596881 [PATCH] i386: cleanup GDT Access
Now we have an explicit per-cpu GDT variable, we don't need to keep the
descriptors around to use them to find the GDT: expose cpu_gdt directly.

We could go further and make load_gdt() pack the descriptor for us, or even
assume it means "load the current cpu's GDT" which is what it always does.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:11 +02:00
Andi Kleen
b4531e863d [PATCH] i386: Use X86_EFLAGS_IF in irqflags.h.
Move X86_EFLAGS_IF et al out to a new header: processor-flags.h, so we
can include it from irqflags.h and use it in raw_irqs_disabled_flags().

As a side-effect, we could now use these flags in .S files.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:10 +02:00
Jan Beulich
d01ad8dd56 [PATCH] x86: Improve handling of kernel mappings in change_page_attr
Fix various broken corner cases in i386 and x86-64 change_page_attr.

AK: split off from tighten kernel image access rights

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:10 +02:00
Rusty Russell
90a0a06aa8 [PATCH] i386: rationalize paravirt wrappers
paravirt.c used to implement native versions of all low-level
functions.  Far cleaner is to have the native versions exposed in the
headers and as inline native_XXX, and if !CONFIG_PARAVIRT, then simply
#define XXX native_XXX.

There are several nice side effects:

1) write_dt_entry() now takes the correct "struct Xgt_desc_struct *"
   not "void *".

2) load_TLS is reintroduced to the for loop, not manually unrolled
   with a #error in case the bounds ever change.

3) Macros become inlines, with type checking.

4) Access to the native versions is trivial for KVM, lguest, Xen and
   others who might want it.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Rusty Russell
d2cbcc49e2 [PATCH] i386: clean up cpu_init()
We now have cpu_init() and secondary_cpu_init() doing nothing but calling
_cpu_init() with the same arguments.  Rename _cpu_init() to cpu_init() and use
it as a replcement for secondary_cpu_init().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Rusty Russell
bf50467204 [PATCH] i386: Use per-cpu GDT immediately upon boot
Now we are no longer dynamically allocating the GDT, we don't need the
"cpu_gdt_table" at all: we can switch straight from "boot_gdt_table" to the
per-cpu GDT.  This means initializing the cpu_gdt array in C.

The boot CPU uses the per-cpu var directly, then in smp_prepare_cpus() it
switches to the per-cpu copy just allocated.  For secondary CPUs, the
early_gdt_descr is set to point directly to their per-cpu copy.

For UP the code is very simple: it keeps using the "per-cpu" GDT as per SMP,
but we never have to move.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Rusty Russell
ae1ee11be7 [PATCH] i386: Use per-cpu variables for GDT, PDA
Allocating PDA and GDT at boot is a pain.  Using simple per-cpu variables adds
happiness (although we need the GDT page-aligned for Xen, which we do in a
followup patch).

[akpm@linux-foundation.org: build fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Ian Campbell
79e030114a [PATCH] i386: Allow i386 crash kernels to handle x86_64 dumps
The specific case I am encountering is kdump under Xen with a 64 bit
hypervisor and 32 bit kernel/userspace.  The dump created is 64 bit due to
the hypervisor but the dump kernel is 32 bit for maximum compatibility.

It's possibly less likely to be useful in a purely native scenario but I
see no reason to disallow it.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Ian Campbell <ian.campbell@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Horms <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:09 +02:00
Rusty Russell
692174b97d [PATCH] i386: Initialize esp0 properly all the time
Whenever we schedule, __switch_to calls load_esp0 which does:

	tss->esp0 = thread->esp0;

This is never initialized for the initial thread (ie "swapper"), so when we're
scheduling that, we end up setting esp0 to 0.  This is fine: the swapper never
leaves ring 0, so this field is never used.

lguest, however, gets upset that we're trying to used an unmapped page as our
kernel stack.  Rather than work around it there, let's initialize it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:09 +02:00
john stultz
5a90cf205c [PATCH] x86: Log reason why TSC was marked unstable
Change mark_tsc_unstable() so it takes a string argument, which holds the
reason the TSC was marked unstable.

This is then displayed the first time mark_tsc_unstable is called.

This should help us better debug why the TSC was marked unstable on certain
systems and allow us to make sure we're not being overly paranoid when
throwing out this troublesome clocksource.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:08 +02:00
Vivek Goyal
1833d6bc72 [PATCH] i386: modpost apic related warning fixes
o Modpost generates warnings for i386 if compiled with CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.text:find_unisys_acpi_oem_table from .text between 'acpi_madt_oem_check' (at offset 0xc0101eda) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:acpi_get_table_header_early from .text between 'acpi_madt_oem_check' (at offset 0xc0101ef0) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'acpi_madt_oem_check' (at offset 0xc0101f2e) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:setup_unisys from .text between 'acpi_madt_oem_check' (at offset 0xc0101f37) and 'enable_apic_mode'WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'mps_oem_check' (at offset 0xc0101ec7) and 'acpi_madt_oem_check'
WARNING: vmlinux - Section mismatch: reference to .init.text:es7000_sw_apic from .text between 'enable_apic_mode' (at offset 0xc0101f48) and 'check_apicid_present'

o Some functions which are inline (acpi_madt_oem_check) are not inlined by
  compiler as these functions are accessed using function pointer. These
  functions are put in .text section and they in-turn access __init type
  functions hence modpost generates warnings.

o Do not iniline acpi_madt_oem_check, instead make it __init.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:08 +02:00
Jeremy Fitzhardinge
973efae21b [PATCH] i386: clean up mach_reboot_fixups
The reboot_fixups stuff seems to be a bit of a mess, specifically the
header is in linux/ when its a purely i386-specific piece of code.  I'm
not sure why it has its config option; its only currently needed for
"geode-gx1/cs5530a", so perhaps whatever config option controls that
hardware should enable this?

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:06 +02:00
Aneesh Kumar K.V
6d1c426158 [PATCH] i386: Update __copy_to_user_inatomic linuxdoc description
Explicity specify that the caller should pin the user memory
otherwise the function will sleep

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:06 +02:00
Simon Arlott
0949be3509 [PATCH] i386: Add an option for the VIA C7 which sets appropriate L1 cache
The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has
a cache line length of 64 according to
http://www.digit-life.com/articles2/cpu/rmma-via-c7.html.  This patch sets
gcc to -march=686 and select s the correct cache shift.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:05 +02:00
takada
f5e8861583 [PATCH] i386: pit_latch_buggy has no effect
Eliminated the arch/i386/kernel/timers in 2.6.18, use clocksoures instead.
pit_latch_buggy was referred in timers/timer_tsc.c, and currently removed.
Therefore nobody refer it.

Until 2.6.17, MediaGX's TSC works correctly.  after 2.6.18, warned "TSC
appears to be running slowly.  Marking it as unstable".  So marked unstable
TSC when CS55x0.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:05 +02:00
Jeremy Fitzhardinge
f76c392380 [PATCH] i386: No need to use -traditional for processing asm in i386/kernel/
No need to use -traditional for processing asm in i386/kernel/

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:05 +02:00