Commit Graph

528 Commits

Author SHA1 Message Date
Tony Thompson
1b3a02eb45 ARMv7: Check whether the SMP/nAMP mode was already enabled
If running in non-secure mode, enabling this register will fault.

Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com>
Acked-by: Srinidhi Kasagar <srinidhikasagar@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-04 12:19:22 +00:00
Russell King
4b46d64165 ARM: ensure initial page tables are setup for SMP systems
Mapping the same memory using two different attributes (memory
type, shareability, cacheability) is unpredictable.  During boot,
we encounter a situation when we're updating the kernel's page
tables which can lead to dirty cache lines existing in the cache
which are subsequently missed.  This causes stack corruption,
and therefore a crash.

Therefore, ensure that the shared and cacheability settings
matches the configuration that will be used later; this together
with the restriction in early_cachepolicy() ensures that we won't
create a mismatch during boot.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-02 16:59:59 +00:00
Russell King
df71dfd4ca ARM: Fix errata 411920 workarounds
Errata 411920 indicates that any "invalidate entire instruction cache"
operation can fail if the right conditions are present.  This is not
limited just to those operations in flush.c, but elsewhere.  Place the
workaround in the already existing __flush_icache_all() function
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29 19:13:09 +00:00
Russell King
657e12fd38 ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled
When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem
to allocate data structures.  However, we call memory_present() after
declaring memory to bootmem, but before we've reserved areas.

This leads to sparsemem data structures being overwritten later in the
kernel's initialization (when slab initializes.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29 17:06:17 +00:00
Russell King
c06e004c72 ARM: Use GFP_DMA only for masks _less_ than 32-bit
We were using GFP_DMA for masks other than 0xffffffff, which is
wrong when some masks are initialized to 0xffffffffffffffff.
This caused such masks to obtain memory from the precious DMA
pool.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25 22:44:30 +00:00
Hartley Sweeten
c768e67625 ARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URL
Remove the URL listed for Maverick EP9312 since it is not available
and modify the help text appropriately.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21 13:09:37 +01:00
Nitin Gupta
787b2faadc ARM: force dcache flush if dcache_dirty bit set
On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.

One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:

do_swap_page()
{
    - Allocate a new page (if not already in swap cache)
    - Issue read from swap disk
        - Block driver issues flush_dcache_page()
        - flush_dcache_page() simply sets PG_dcache_dirty bit and does not
          actually issue a flush since this page has no user space mapping yet.
    - Now, if swap disk is almost full, this newly read page is removed
      from swap cache and corrsponding swap slot is freed.
    - Map this page anonymously in user space.
    - update_mmu_cache()
        - Since this page does not have kernel mapping (its not in page/swap
          cache and is mapped anonymously), it does not issue dcache flush
          even if dcache_dirty bit is set by flush_dcache_page() above.

    <user now gets stale data since dcache was never flushed>
}

Same problem exists on mips too.

[1] example:
 - brd (RAM based block device)
 - ramzswap (RAM based compressed swap device)

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-12 17:52:26 +01:00
Russell King
6a5e293f1b ARM: Add kmap_atomic type debugging
Seemingly this support was missed when highmem was added, so
DEBUG_HIGHMEM wouldn't have checked the kmap_atomic type.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11 16:29:48 +01:00
Catalin Marinas
3257f43d92 ARM: 5747/1: Fix the start_pg value in free_memmap()
If sparsemem is enabled, the start_pfn passed to the free_memmap()
function corresponds to an area of memory not known to the kernel and
pfn_to_page returns a wrong value. The (start_pfn - 1), however, is
known to the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:13:00 +01:00
Catalin Marinas
32cfb1b16f ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range
This is needed because applications using the sys_cacheflush system call
can pass a memory range which isn't mapped yet even though the
corresponding vma is valid. The patch also adds unwinding annotations
for correct backtraces from the coherent_user_range() functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:12:59 +01:00
Imre Deak
1d2127123d ARM: 5742/1: ARM: add debug check for invalid kernel page faults
According to the following in arch/arm/mm/fault.c page faults from
kernel mode are invalid if mmap_sem is already held and there is
no exception handler defined for the faulting instruction:

/*
 * As per x86, we may deadlock here.  However, since the kernel only
 * validly references user space from well defined areas of the code,
 * we can bug out early if this is from code which shouldn't.
 */
if (!down_read_trylock(&mm->mmap_sem)) {
	if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
		goto no_context;

Since mmap_sem can be held at arbitrary times by another thread this
also means that any page faults from kernel mode are invalid if no
exception handler is defined for them, regardless whether mmap_sem is
held at the time of fault.

To easier detect code that can trigger the above error, add a check
also for the case where mmap_sem is acquired. As this has an overhead
make it a VM debug check.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-05 17:55:55 +01:00
Kirill A. Shutemov
d25ef8b86e ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7
Currently, on ARMv6 and ARMv7, if an application tries to execute
code (or garbage) on non-executable page it hangs. It caused by
incorrect prefetch abort handling. Now every prefetch abort
processes as a translation fault.

To fix this we have to analyze instruction fault status register
to figure out reason why we've got the abort and process it
accordingly.

To make IFSR different from DFSR we set bit 31 which is reserved in
both IFSR and DFSR.

This patch also tries to protect from future hangs on unexpected
exceptions. An application will be killed if unexpected exception
type was received.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:34:32 +01:00
Kirill A. Shutemov
4fb2847437 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()
Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:34:32 +01:00
Greg Ungerer
6806bfe18f ARM: 5740/1: fix valid_phys_addr_range() range check
Commit 1522ac3ec9
("Fix virtual to physical translation macro corner cases")
breaks the end of memory check in valid_phys_addr_range().
The modified expression results in the apparent /dev/mem size
being 2 bytes smaller than what it actually is.

This patch reworks the expression to correctly check the address,
while maintaining use of a valid address to __pa().

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:32:34 +01:00
Russell King
e616c59140 ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast
We suffer an unfortunate combination of "features" which makes highmem
support on platforms without hardware TLB maintainence broadcast difficult:

- we need kmap_high_get() support for DMA cache coherence
- this requires kmap_high() to take a spinlock with IRQs disabled
- kmap_high() occasionally calls flush_all_zero_pkmaps() to clear
  out old mappings
- flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which
  on s/w IPI'd systems eventually calls smp_call_function_many()
- smp_call_function_many() must not be called with IRQs disabled:

WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240()
Modules linked in:
Backtrace:
[<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c)
 r6:c007cd18 r5:c02ff228 r4:0000017c
[<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80)
[<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c)
 r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34
[<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240)
[<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38)
[<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38)
[<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58)
 r6:00000001 r5:00000800 r4:c05f3590
[<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8)
[<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0)
[<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c)
[<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194)
[<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290)
[<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38)
[<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438)
 r4:c1819988
[<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c)
[<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318)
[<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4)
[<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84)
[<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4)
 r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0
[<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60)
...

So we disable highmem support on these systems.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28 18:06:20 +01:00
Russell King
041d785f80 ARM: Fix warning: unused variable 'highmem'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28 18:06:20 +01:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Rusty Russell
56f8ba83a5 cpumask: use mm_cpumask() wrapper: arm
Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-24 09:34:49 +09:30
Russell King
ae19ffbadc Merge branch 'master' into for-linus 2009-09-22 21:01:40 +01:00
Geert Uytterhoeven
cc013a8890 arches: drop superfluous casts in nr_free_pages() callers
Commit 9617729941 ("Drop free_pages()")
modified nr_free_pages() to return 'unsigned long' instead of 'unsigned
int'.  This made the casts to 'unsigned long' in most callers superfluous,
so remove them.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <zankel@tensilica.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:34 -07:00
Russell King
df297bf6c7 ARM: Add support for checking access permissions on prefetch aborts
ARMv6 introduces non-executable mappings, which can cause prefetch aborts
when an attempt is made to execute from such a mapping.  Currently, this
causes us to loop in the page fault handler since we don't correctly
check for proper permissions.

Fix this by checking that VMAs have VM_EXEC set for prefetch aborts.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-20 16:53:40 +01:00
Russell King
d374bf14a5 ARM: Separate out access error checking
Since we get notified separately about prefetch aborts, which may be
permission faults, we need to check for appropriate access permissions
when handling a fault.  This patch prepares us for doing this by
separating out the access error checking.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-20 16:53:40 +01:00
Russell King
bf4569922b ARM: Ensure correct might_sleep() check in pagefault path
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-20 12:55:50 +01:00
Russell King
b42c6344b0 ARM: Update page fault handling for new OOM techniques
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-20 12:55:49 +01:00
Russell King
c88d6aa71b ARM: Provide definitions and helpers for decoding the FSR register
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-20 12:55:49 +01:00
Russell King
40d743b8c1 Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 2009-09-19 13:47:57 +01:00
Linus Walleij
bc581770cf ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3
This adds the TCM interface to Linux, when active, it will
detect and report TCM memories and sizes early in boot if
present, introduce generic TCM memory handling, provide a
generic TCM memory pool and select TCM memory for the U300
platform.

See the Documentation/arm/tcm.txt for documentation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:11:05 +01:00
Kirill A. Shutemov
910a17e57a ARM: 5700/1: ARM: Introduce ARM_L1_CACHE_SHIFT to define cache line size
Currently kernel believes that all ARM CPUs have L1_CACHE_SHIFT == 5.
It's not true at least for CPUs based on Cortex-A8.

List of CPUs with cache line size != 32 should be expanded later.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:06:38 +01:00
Nicolas Pitre
2f82af08fc Nicolas Pitre has a new email address
Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-15 09:37:12 -07:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
7010381449 Merge branch 'nomadik' into devel-stable 2009-09-12 11:50:52 +01:00
Russell King
b7cfda9fc3 ARM: Fix pfn_valid() for sparse memory
On OMAP platforms, some people want to declare to segment up the memory
between the kernel and a separate application such that there is a hole
in the middle of the memory as far as Linux is concerned.  However,
they want to be able to mmap() the hole.

This currently causes problems, because update_mmu_cache() thinks that
there are valid struct pages for the "hole".  Fix this by making
pfn_valid() slightly more expensive, by checking whether the PFN is
contained within the meminfo array.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Khasim Syed Mohammed <khasim@ti.com>
2009-09-12 11:48:09 +01:00
Nicolas Pitre
7929eb9cf6 ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
Let's suppose a highmem page is kmap'd with kmap().  A pkmap entry is
used, the page mapped to it, and the virtual cache is dirtied.  Then
kunmap() is used which does virtually nothing except for decrementing a
usage count.

Then, let's suppose the _same_ page gets mapped using kmap_atomic().
It is therefore mapped onto a fixmap entry instead, which has a
different virtual address unaware of the dirty cache data for that page
sitting in the pkmap mapping.

Fortunately it is easy to know if a pkmap mapping still exists for that
page and use it directly with kmap_atomic(), thanks to kmap_high_get().

And actual testing with a printk in the added code path shows that this
condition is actually met *extremely* frequently.  Seems that we've been
quite lucky that things have worked so well with highmem so far.

Cc: stable@kernel.org
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-04 19:20:07 +01:00
Nicolas Pitre
13f96d8f4c ARM: 5687/1: fix an oops with highmem
In xdr_partial_copy_from_skb() there is that sequence:

		kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
		[...]
		flush_dcache_page(*ppage);
		kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);

Mixing flush_dcache_page() and kmap_atomic() is a bit odd,
especially since kunmap_atomic() must deal with cache issues
already.  OTOH the non-highmem case must use flush_dcache_page()
as kunmap_atomic() becomes a no op with no cache maintenance.

Problem is that with highmem the implementation of kmap_atomic()
doesn't set page->virtual, and page_address(page) returns 0 in
that case. Here flush_dcache_page() calls __flush_dcache_page()
which calls __cpuc_flush_dcache_page(page_address(page)) resulting
in a kernel oops.

None of the kmap_atomic() implementations uses set_page_address().
Hence we can assume page_address() is always expected to return 0 in
that case. Let's conditionally call __cpuc_flush_dcache_page() only
when the page address is non zero, and perform that test only when
highmem is configured.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02 11:33:24 +01:00
Russell King
65cec8e3db ARM: implement highpte
Add the ARM implementation of highpte, which allows PTE tables to be
placed in highmem.  Unfortunately, we do not offer highpte support
when support for L2 cache is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-17 20:02:06 +01:00
Russell King
dde5828f56 ARM: Fix broken highmem support
Currently, highmem is selectable, and you can request an increased
vmalloc area.  However, none of this has any effect on the memory
layout since a patch in the highmem series was accidentally dropped.
Moreover, even if you did want highmem, all memory would still be
registered as lowmem, possibly resulting in overflow of the available
virtual mapping space.

The highmem boundary is determined by the highest allowed beginning
of the vmalloc area, which depends on its configurable minimum size
(see commit 60296c71f6 for details on
this).

We should create mappings and initialize bootmem only for low memory,
while the zone allocator must still be told about highmem.

Currently, memory nodes which are completely located in high memory
are not supported.  This is not a huge limitation since systems
relying on highmem support are unlikely to have discontiguous memory
with large holes.

[ A similar patch was meant to be merged before commit 5f0fbf9eca
  and be available  in Linux v2.6.30, however some git rebase screw-up
  of mine dropped the first commit of the series, and that goofage
  escaped testing somehow as well. -- Nico ]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Nicolas Pitre <nico@marvell.com>
2009-08-15 12:36:00 +01:00
Catalin Marinas
412bb0a622 Include linux/sched.h in arch/arm/mm/fault.c
When building with !MMU, task_struct is not defined. Just include the
relevant file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:37:09 +01:00
Catalin Marinas
bdaaaec397 nommu: Do not set PRRR and NMRR in proc-v7.S if !MMU
ARMv7-R profile CPUs do not have these registers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:35:06 +01:00
Catalin Marinas
8b79d5f217 nommu: Add #ifdef CONFIG_MMU around the PTE sanity checks
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:35:04 +01:00
Catalin Marinas
b32f3afe3c nommu: Include asm/setup.h in arch/arm/mm/nommu.c
This is needed for the struct meminfo definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:35:03 +01:00
Catalin Marinas
ab6494f0c9 nommu: Add noMMU support to the DMA API
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:35:02 +01:00
Catalin Marinas
09529f7a1a nommu: Fix the fault processing for the MMU-less case
The patch adds the necessary ifdefs around functions that only make
sense when the MMU is enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:34:55 +01:00
Catalin Marinas
347c8b70b1 Thumb-2: Implement the unified arch/arm/mm support
This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:56 +01:00
Russell King
f7a55fa6ec [ARM] remove L_PTE_BUFFERABLE and L_PTE_CACHEABLE
These old symbols are meaningless now that we have memory type
support implemented.  The entire memory type field needs to be
modified rather than just a few bits twiddled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-11 16:55:52 +01:00
Russell King
ba9b42e4ff [ARM] export __cpu_flush_dcache_page
Now required for libsas:

  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 1096 modules
ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined!

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05 15:25:00 +01:00
Alessandro Rubini
0b260fd4b0 [ARM] 5587/1: nomadik: add l2cc
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:20:47 +01:00
Linus Torvalds
9e268beb92 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits)
  [ARM] idle: clean up pm_idle calling, obey hlt_counter
  [ARM] S3C: Fix gpio-config off-by-one bug
  [ARM] S3C64XX: add to_irq() support for EINT() GPIO
  [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit
  [ARM] S3C64XX: fix HCLK gate defines
  [ARM] Update mach-types
  [ARM] wire up rt_tgsigqueueinfo and perf_counter_open
  OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
  OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
  OMAP3: Add support for DPLL3 divisor values higher than 2
  OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
  OMAP3 SRAM: add more comments on the SRAM code
  OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  OMAP3 clock: add a short delay when lowering CORE clk rate
  OMAP3 clock: initialize SDRC timings at kernel start
  OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
  [ARM] Add old Feroceon support to compressed/head.S
  [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit
  [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks
  [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU
  ...
2009-06-22 14:56:13 -07:00
Linus Torvalds
d06063cc22 Move FAULT_FLAG_xyz into handle_mm_fault() callers
This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21 13:08:22 -07:00
George G. Davis
c2860d43f5 [ARM] 5540/1: 32-bit Thumb-2 {ld,st}{m,rd} alignment fault fixup support
From: Min Zhang <mzhang@mvista.com>

Add alignment fault fixup support for 32-bit Thumb-2 LDM, LDRD, POP,
PUSH, STM and STRD instructions.  Alignment fault fixup support for
the remaining 32-bit Thumb-2 load/store instruction cases is not
included since ARMv6 and later processors include hardware support
for loads and stores of unaligned words and halfwords.

Signed-off-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 16:35:34 +01:00