Commit Graph

2673 Commits

Author SHA1 Message Date
Hans Verkuil
c3624f99a8 V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never set
ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set.

The values set with VIDIOC_S_FBUF were not actually used until the next
VIDIOC_S_FMT. Fixed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20 12:18:02 -03:00
Adrian Bunk
0a0f2c87cd V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d static
The fcv1236d support patch was created before the "dvb: remove static
dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't
get merged until after the fact.

struct dvb_pll_fcv1236d can become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:37 -03:00
Adrian Bunk
4bc4365291 V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixes
This patch:
- adds a missing error check and
- removes an error check that could never be true

Both spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:37 -03:00
Luca Olivetti
639ffd2d90 V4L/DVB (5932): Af9005 fix tuner module unload
This patch removes the useless tuner field and avoids a double free of 
the tuner (either mt2060 or qt1010).

Signed-off-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:36 -03:00
Hans Verkuil
be9a5c7d9a V4L/DVB (5920): ivtv: fix incorrect fw size report.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:35 -03:00
Hans Verkuil
5a338c38ce V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.
While decoding (MPEG or YUV) is active or when VBI output is in use, then
do not clear the VBI output of the saa7127. Only after the last user is
gone can we clear it.

This fixes the case where playback was stopped, another channel was chosen
and playback was restarted, while /dev/vbi16 was used to set the WSS
(widescreen) setting. Without this fix the WSS was reset on every stop
instead of just keeping the last value.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:34 -03:00
Hans Verkuil
0b3e29e6d7 V4L/DVB (5917): ivtv: improve mailbox responsiveness.
First try polling for the result of a mailbox command, then
switch to a test/sleep loop. Also reduce the sleep time from 10 ms
to 1 ms. Improves the responsiveness of the mailbox handling.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:33 -03:00
Hans Verkuil
ac4251445d V4L/DVB (5916): ivtv: fix pause/continue/play handling
Pausing a decoder followed by a Play command would do nothing. Fixed.
Pausing a decoder running at non-standard speed following by a Continue
would reset the speed to 100%. Fixed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:32 -03:00
Trent Piepho
bc147135bc V4L/DVB (5900): usbvision: fix bugs [sg]_register functions
s_register was assigning the return code to (unsigned)reg->val, rather than
errCode, which it what it would return.  Except reg->val can't be < 0, so it
would never actually return an error.

g_register never actually put the value it read into reg->val.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:31 -03:00
Trent Piepho
cf784d554f V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support
Various gpio and mux settings for the Osprey 440 weren't correct.  Fix them
and provide some documentation about how the gpios work.

The osprey eeprom routine wasn't run for the 440, add it.  It was also crap,
re-written to be better.

Add the Osprey 440 to the Bt878 ALSA driver's whitelist.  Currently the sample
rate is fixed at 32kHz, as the driver doesn't support different rates for
digital input mode, though the card can select the rate from 32, 44.1, or 48
kHz via gpio.

Setting the audio gain via ALSA isn't supported yet; a userspace tool that
programs the X9221 via i2c-dev must be used.

The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC
used, resulting in extremely garbled sound.  That is fixed in a followup
patch.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:30 -03:00
Trent Piepho
9896bbc197 V4L/DVB (5891): zr36067: Turn off raw capture properly
When raw capture was turned off, the current capturing frame (v4l_grab_frame)
wasn't reset to NO_GRAB_ACTIVE.  If capture was turned back on, the driver
would think this frame was currently being captured, and wait for it to
complete before starting a new frame.  The hardware on the other hand would
not be actively capturing a frame.  The result was the driver would wait
forever for v4l_grab_frame to be captured.

Some calls to zr36057_set_memgrab(0) were missing spin-locks, which have been
added.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:26 -03:00
Trent Piepho
603d6f2c8f V4L/DVB (5890): zr36067: Add UYVY, RGB555X, RGB565X, and RGB32 formats
Add support for the UYVY and the other big endian output formats.  The
driver was naming formats based on the host endianess.  This is different
that all the other drivers appear to work and not what software appears
to expect.

Use ARRAY_SIZE() to find the the size of the zoran_formats array.

Change the way the driver handles setting the video format register.  Rather
than use some if and switch statements to set to register by looking at the
format id, the format list simply has a field with the proper bits to set.

Adds a bit of ifdef to make a driver without V4L1 support more possible.
Also create a macro for defining formats that handles vl41 and/or vl42
support to avoid repeated ifdefs in the format list.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:26 -03:00
Trent Piepho
bb2e033913 V4L/DVB (5888): zr36067: Driver was not returning correct image size
The driver was returning the size of the (fixed) buffer it allocated as the
sizeimage field in the v4l2 pixel format, rather than the actual size of the
image.  For example, a 192x128 YUYV image is 49152 bytes but the driver would
always return 131072 bytes since if that was the size of the v4l buffer.

This violates the v4l2 spec, which says that sizeimage should be the actual
size of the image for uncompressed formats.  It also caused mplayer to crash.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:25 -03:00
Trent Piepho
e42af83f48 V4L/DVB (5887): zr36067: Fix poll() operation
During uncompressed capture, the poll() function was looking the wrong frame.
It was using the frame the driver was going to capture into next (pend_tail),
when it should have been looking at the next frame to be de-queued with
DQBUF/SYNC (sync_tail).

It also wasn't looking in the right spot.  It was looking at the file handle's
copy of the buffer status, rather than the driver core copy.  The interrupt
routine marks frames as done in the driver core copy, the file handle copy
isn't updated.  So even if poll() looked at the right frame, it would never
see it transition to done and return POLLIN.

The compressed capture code has this same problem, looking in fh->jpg_buffers
when it should have used zr->jpg_buffers.

There was some logic to detect when there was no current capture in process
nor any frames queued and try to return an error, which ends up being a bad
idea.  It's possible to call select() from one thread while no capture is in
process, or no frames queued, and then start a capture or queue frames from
another thread.

The buffer state variables are protected by a spin lock, which the code wasn't
acquiring.  That is fixed too.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:24 -03:00
Trent Piepho
c812b67ca4 V4L/DVB (5886): zr36067: Fix problem setting norms
The zr36067 driver doesn't make a distinction between the different sub-types
of NTSC, PAL, or SECAM norms.  For example, when the enum std ioctl returns
the PAL standard it returns PAL_BG|PAL_DK|PAL_H|PAL_I.

When setting the norm, it required the bitmask to match exactly the set of
norms used during the enumeration.  If just one norm was specified, for
example PAL_BG or NTSC_M, it would fail.  This violates the V4L2 spec,
"VIDIOC_S_STD accepts *one* or more flags..."

The key thing to realize is that V4L2_STD_PAL is not one bit, it is multiple
bits.  It's ok to call S_STD with any *one* of those bits, but the driver was
requiring *all* of them.

This fixes the S_STD function so that it will accept any set of one or more
PAL norms as PAL, and the same for NTSC and SECAM.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30 16:26:23 -03:00
Al Viro
52cf875fb0 more VIRT_TO_BUS dependencies
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:56 -07:00
Hans Verkuil
1b2232ab87 V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading module
State struct was never freed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:57 -03:00
Trent Piepho
2fc9e2f78a V4L/DVB (5877): radio-gemtek-pci: remove unused structure member
The drivers reads the PCI subsystem ID into its state structure, but it's
never used anywhere.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:56 -03:00
Cyrill Gorcunov
32b78de7fe V4L/DVB (5871): Conexant 2388x: check for kthread_run
The patch adds checking of kthread_run return code and issues a message
if it fails.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:55 -03:00
Hans Verkuil
a46c5fbc69 V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next.
If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it 
should check whether the passed control ID is valid and return 0 if it 
isn't. Otherwise a for-loop over the control IDs will never end.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:53 -03:00
Hans Verkuil
dd1e729d63 V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another stream
The VBI DMA is handled in a special way and is marked with a bit.
However, that bit was set at the wrong time and could be cleared
by mistake if a PCM (or other) DMA request would arrive before the
VBI DMA was completed. So on completion of the VBI DMA the driver
no longer knew that that DMA transfer was for VBI data. And this
in turn caused havoc with the card's DMA engine.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:52 -03:00
Mauro Carvalho Chehab
201700d354 V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffies
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:51 -03:00
Mauro Carvalho Chehab
fe06fe0a4d V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:51 -03:00
Mauro Carvalho Chehab
818ca4711e V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:50 -03:00
Mauro Carvalho Chehab
f7518bd2d9 V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeout
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:49 -03:00
Mauro Carvalho Chehab
09df5cbe46 V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:49 -03:00
Mauro Carvalho Chehab
a2d66a37c7 V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:47 -03:00
Hans Verkuil
7809b4cba2 V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:47 -03:00
Hans Verkuil
ae38d93bd7 V4L/DVB (5854): ivtv: cleanup of driver messages
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:46 -03:00
Hans Verkuil
11d28766de V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:45 -03:00
Alexey Dobriyan
4b9bc014bf V4L/DVB (5852): ivtv: don't recompile needlessly
Driver prints banner including kernel version. Was a leftover from when 
the driver was standalone.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:44 -03:00
Hans Verkuil
c9b9a5817a V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config option
I2C_ALGOBIT must also be selected when ivtv is selected.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:43 -03:00
Hans Verkuil
67632e17da V4L/DVB (5850): ivtv: improve API command debugging
Turn off debugging of API commands that occur during encoding or decoding,
unless they are explicitly requested.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:42 -03:00
Yoann Padioleau
8f40a9f532 V4L/DVB (5848): Av7110: fix typo
Parse error in ifdef or bad use of macro.

Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:41 -03:00
Yoann Padioleau
dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Robert P. J. Day
97989ada76 V4L/DVB (5847): Clean up schedule_timeout calls in cpia2 and ivtv code
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:49 -03:00
Robert P. J. Day
f3a43d3082 V4L/DVB (5846): Clean up setting state and scheduling timeouts
Replace assignments to "current->state" with the preferred calls to
schedule_timeout_interruptible().

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:49 -03:00
Hans Verkuil
bd58df6d52 V4L/DVB (5844): ivtv: add high volume debugging flag
Add support for high volume debug messages, allowing them to be turned
on selectively.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:48 -03:00
Hans Verkuil
90851fe9fa V4L/DVB (5843): ivtv: fix missing signal_pending check.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:47 -03:00
Hans Verkuil
f885969196 V4L/DVB (5842): ivtv: Add locking to ensure stream setup is atomic.
Starting an MPEG and VBI capture simultaneously caused errors in
the VBI setup: this setup was done twice when it should be done
only for the first stream that is opened.
Added a mutex to prevent this from happening.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:47 -03:00
Hans Verkuil
0901973f4b V4L/DVB (5841): tveeprom: add support for Philips FQ1216LME MK3 tuner.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:46 -03:00
Mauro Carvalho Chehab
3ea9661538 V4L/DVB (5840): fix dst and cx24123: tune() callback changed signess for delay
tune() dvb_frontend callback changed delay signess:
        int (*tune)(struct dvb_frontend* fe,
                    struct dvb_frontend_parameters* params,
                    unsigned int mode_flags,
-                   int *delay,
+                   unsigned int *delay,

This change caused warnings on cx24123 and dst modules:

/home/v4l/master/v4l/cx24123.c:1034: warning: initialization from incompatible pointer type
/home/v4l/master/v4l/dst.c:1782: warning: initialization from incompatible pointer type
/home/v4l/master/v4l/dst.c:1808: warning: initialization from incompatible pointer type
/home/v4l/master/v4l/dst.c:1837: warning: initialization from incompatible pointer type
/home/v4l/master/v4l/dst.c:1860: warning: initialization from incompatible pointer type

This patch corrects the function prototype on both modules to follow the
core change.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:46 -03:00
Oliver Endriss
260f8d7c4c V4L/DVB (5838): dvb-core: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:46 -03:00
Oliver Endriss
0402a6c2aa V4L/DVB (5837): stv0299: Fix signedness warning (gcc 4.1.1, kernel 2.6.22)
Fix signedness warning (gcc 4.1.1, kernel 2.6.22).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:45 -03:00
Oliver Endriss
defd574ec0 V4L/DVB (5836): dvb-ttpci: re-initialize aspect ratio and pan scan after arm crash
Re-initialize aspect ratio and pan scan after arm crash.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:45 -03:00
Oliver Endriss
804b445894 V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:44 -03:00
Trent Piepho
372280d2a3 V4L/DVB (5834): dvb-core: fix signedness warnings and const stripping
Make some pointers const, and then delete some now unnecessary casts,
which were the wrong signedness anyway, being used to strip the const
from another pointer.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:43 -03:00
Trent Piepho
d67be61ebe V4L/DVB (5832): ir-common: optimize bit extract function
New code is simpler, shorter, compiles to about half the size, and is 2
to 4 times faster depending on how many bits in the mask are set.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:42 -03:00
Trent Piepho
ba2cf98249 V4L/DVB (5831): stradis: use ARRAY_SIZE
sizeof(palette2fmt) / sizeof(u32) => ARRAY_SIZE(palette2fmt)

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:42 -03:00
Marco Gittler
59800555f7 V4L/DVB (5829): Firmware extract and loading for opera dvb-usb update
Better way of creating and loading the firmware used.
Update for get_dvb_firmware script to extract the files for opera usb-box
Help file for creating the firmware added

Signed-off-by: Marco Gittler <g.marco@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:41 -03:00