Commit Graph

30 Commits

Author SHA1 Message Date
Moger, Babu
6f4fdda41b [SCSI] scsi_dh_rdac: Add two new IBM devices to rdac_dev_list
This patch adds two new IBM storage devices which can use rdac device handlers.

Signed-off-by: Babu Moger <babu.moger@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10 08:54:10 -06:00
Chandra Seetharaman
970f3f47e7 [SCSI] scsi_dh: Make rdac hardware handler's activate() async
Batch up MODE_SELECT in rdac device handler.

LSI RDAC storage has the capability of handling mode selects for
multiple luns in a same command. Make use of that ability to send
as few MODE SELECTs as possible to the storage controller as possible.

This patch creates a work queue and queues up activate requests
when a MODE SELECT is sent down the wire. When that MODE SELECT
completes, it compiles queued up activate requests for multiple
luns into a single MODE SELECT.

This reduces the time to do failover/failback of large number of LUNS.

Signed-off-by: Babu Moger <babu.moger@lsi.com>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:47 -06:00
Chandra Seetharaman
3ae31f6a7b [SCSI] scsi_dh: Change the scsidh_activate interface to be asynchronous
Make scsi_dh_activate() function asynchronous, by taking in two additional
parameters, one is the callback function and the other is the data to call
the callback function with.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:46 -06:00
Moger, Babu
c0630f76d0 [SCSI] scsi_dh_rdac: Fix for returning correct mode select cmd return info
The function mode_select_handle_sense returns SCSI_DH_OK even when there is a sense code which is incorrect. Removing it so that it returns SCSI_DH_IO when there is sense that is not handled by this function.

Signed-off-by: Babu Moger <babu.moger@lsi.com>
Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Reviewed-by: Bob Stankey <Robert.stankey@lsi.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:45:09 -05:00
Moger, Babu
dd784edcfc [SCSI] scsi_dh_rdac: changes for rdac debug logging
Patch to add debugging stuff for rdac device handler.
- Added a bit mask "module parameter" rdac_logging with 2 bits for each type
  of logging.
- currently defined only two types of logging(failover and sense logging). Can
  be enhanced later if required.
- By default only failover logging is enabled which is equivalent of current
  logging.

Signed-off-by: Babu Moger <babu.moger@lsi.com>
Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Reviewed-by: Bob Stankey <Robert.stankey@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12 09:35:31 -05:00
Moger, Babu
1527666e6a [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization
Adding the code to read the debug information during initialization. This
patch collects the information about storage and controllers during
rdac_activate.

Signed-off-by: Babu Moger <babu.moger@lsi.com>
Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Reviewed-by: Bob Stankey <Robert.stankey@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12 09:35:31 -05:00
Moger, Babu
87b79a5327 [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach
Moving the initialization code from rdac_activate to rdac_bus_attach which is
more efficient.  We don't have to collect all the information during every
activate.

Signed-off-by: Babu Moger <babu.moger@lsi.com>
Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Reviewed-by: Bob Stankey <Robert.stankey@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12 09:35:30 -05:00
Charlie Brady
5bab08858c [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530
These storage arrays can use RDAC when configured with 'linux' as the
initiator.

http://www.sun.com/storage/disk_systems/workgroup/2500/
http://www.sun.com/storage/disk_systems/workgroup/2510/
http://www.sun.com/storage/disk_systems/workgroup/2530/

Signed-off-by: Charlie Brady <charlieb@budge.apana.org.au>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12 09:35:25 -05:00
Yanqing_Liu@Dell.com
cdf69bb91b [SCSI] scsi_dh_rdac: add support for next generation of Dell PV array
This patch is to add DM support for next generation of Dell PowerVault
storage array.

Signed-off-by: Yanqing Liu <Yanqing_Liu@Dell.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 08:46:09 -05:00
Chandra Seetharaman
4dbfb544ad [SCSI] scsi_dh: add two SUN devices to the list of devices supported by default
Reported-by: Rice Brown <rick.brown@oit.gatech.edu>
Signed-Off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:23 -05:00
Chauhan, Vijay
8f03226358 [SCSI] scsi_dh_rdac: Retry for NOT_READY(02/04/01) in rdac device handler
During device discovery read capacity fails with 0x020401 and sets the
device size to 0. As a reason any I/O submitted to this path gets
killed at sd_prep_fn with BLKPREP_KILL. This patch is to retry for
0x020401. NEED_RETRY in scsi_decide_disposition does not give
sufficient time for the device to become ready.

Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-20 17:21:14 -05:00
Chauhan, Vijay
af50bb993d [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition
This patch adds retry for NOT_READY check condition - Quiesce in
progress (02/A1/02)

Signed-off-by: Vijay Chauhan<vijay.chauhan@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-17 22:07:06 -04:00
Chauhan, Vijay
7687fb9209 [SCSI] scsi_dh_rdac: Retry mode select for NO_SENSE, ABORTED_COMMAND, UNIT_ATTENTION, NOT_READY(02/04/01)
This patch is to add retry for mode select if mode select command is
returned with sense NO_SENSE, UNIT_ATTENTION, ABORTED_COMMAND,
NOT_READY(02/04/01). This patch reorganise the sense keys from if-else
to switch-case format for better maintainability.

Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:23 -05:00
Chauhan, Vijay
ea41e41588 [SCSI] scsi_dh_rdac: Retry for Quiescence in Progress in rdac device handler
During device discovery read capacity fails with 0x068b02 and sets the
device size to 0. As a reason any I/O submitted to this path gets
killed at sd_prep_fn with BLKPREP_KILL. This patch is to retry for
0x068b02

Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:12 -05:00
Babu Moger
273c478152 [SCSI] scsi_dh_rdac: Add LSI vendor and product ids in rdac device list
[jejb: fixed whitespace damage]
Signed-off-by: Babu Moger <Babu.Moger@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:17 -06:00
Chandra Seetharaman
c85f8cb925 [SCSI] scsi_dh: Retry mode select in rdac device handler
When the mode select sent to the controller fails with the retryable
error, it is better to retry the mode_select from the hardware handler
itself, instead of propagating the failure to dm-multipath.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:15 -06:00
Chandra Seetharaman
9eece961fc [SCSI] scsi_dh: Make sure the state of a path is set properly when controller is swapped from passive to active
When the controller ownership is changed (from passive to active),
check_ownership() doesn't set the state of the device to ACTIVE.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reported-by: "Moger, Babu" <Babu.Moger@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:15 -06:00
Chandra Seetharaman
5a36756b8b [SCSI] scsi_dh: Initialize path state to be passive when path is not owned
Set the path state to be passive when we learn that the controller does
not own the path to the LUN.

This will avoid sending even a single i/o thru the passive path at the
probe time.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:11 -05:00
Mike Christie
6000a368cd [SCSI] block: separate failfast into multiple bits.
Multipath is best at handling transport errors. If it gets a device
error then there is not much the multipath layer can do. It will just
access the same device but from a different path.

This patch breaks up failfast into device, transport and driver errors.
The multipath layers (md and dm mutlipath) only ask the lower levels to
fast fail transport errors. The user of failfast, read ahead, will ask
to fast fail on all errors.

Note that blk_noretry_request will return true if any failfast bit
is set. This allows drivers that do not support the multipath failfast
bits to continue to fail on any failfast error like before. Drivers
like scsi that are able to fail fast specific errors can check
for the specific fail fast type. In the next patch I will convert
scsi.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:52 -04:00
Yanqing_Liu@Dell.com
650849d71c [SCSI] scsi_dh: add Dell product information into rdac device handler
Add Dell Powervault storage arrays into device list of rdac device
handler.

Signed-off-by: Yanqing Liu <yanqing_liu@dell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 12:11:51 -05:00
FUJITA Tomonori
114f1ea408 [SCSI] scsi_dh: no need to initialize rq->cmd with blk_get_request
blk_get_request initializes rq->cmd (rq_init does) so the users don't
need to do that.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:14 -05:00
Mike Anderson
c7dbb627a2 [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE
Change scsi_dh check_sense functions to return ADD_TO_MLQUEUE
to allow retries to occur without restriction of blk_noretry_request
check.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-29 09:13:51 -05:00
Linus Torvalds
c5b0079c0a Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (22 commits)
  [SCSI] ibmvfc: Driver version 1.0.2
  [SCSI] ibmvfc: Add details to async event log
  [SCSI] ibmvfc: Sanitize response lengths
  [SCSI] ibmvfc: Fix for lost async events
  [SCSI] ibmvfc: Fixup host state during reinit
  [SCSI] ibmvfc: Fix another hang on module removal
  [SCSI] ibmvscsi: Fixup desired DMA value for shared memory partitions
  [SCSI] megaraid_sas: remove sysfs dbg_lvl world writeable permissions
  [SCSI] qla2xxx: Update version number to 8.02.01-k7.
  [SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().
  [SCSI] qla2xxx: Reference proper ha during SBR handling.
  [SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs.
  [SCSI] qla2xxx: Don't leak SG-DMA mappings while aborting commands.
  [SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT.
  [SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.
  [SCSI] scsi_dh: Initialize lun_state in check_ownership()
  [SCSI] scsi_dh: Do not use scsilun in rdac hardware handler
  [SCSI] megaraid_sas: version and Documentation Update
  [SCSI] megaraid_sas: add new controllers (0x78 0x79)
  [SCSI] megaraid_sas: add the shutdown DCMD cmd to driver shutdown routine
  ...
2008-08-20 08:42:53 -07:00
Chandra Seetharaman
fe42625cdf [SCSI] scsi_dh: Initialize lun_state in check_ownership()
lun_state need to be initialized inside check_ownership().

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16 10:13:34 -05:00
Chandra Seetharaman
8479fca119 [SCSI] scsi_dh: Do not use scsilun in rdac hardware handler
RDAC storage controller doesn't seem to use the scsilun format. It uses
only the last byte for LUN.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16 10:13:33 -05:00
Adrian Bunk
f08c0761d6 make struct scsi_dh_devlist's static
This patch makes several needlessly global struct scsi_dh_devlist's
static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-11 12:20:31 -07:00
Hannes Reinecke
ca9f008986 [SCSI] scsi_dh: Update RDAC device handler
This patch updates the RDAC device handler to
refuse to attach to devices not supporting the
RDAC vpd pages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:52 -04:00
Hannes Reinecke
765cbc6dad [SCSI] scsi_dh: Implement common device table handling
Instead of having each and every driver implement its own
device table scanning code we should rather implement a common
routine and scan the device tables there.
This allows us also to implement a general notifier chain
callback for all device handler instead for one per handler.

[sekharan: Fix rejections caused by conflicting bug fix]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:51 -04:00
Chandra Seetharaman
33af79d12e scsi_dh: Verify "dev" is a sdev before accessing it.
Before accessing the device data structure in hardware handlers,
make sure it is a indeed a sdev device.

Yinghai Lu <yhlu.kernel@gmail.com> found the bug on Jul 16, 2008,
and later tested/verified the following fix.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16 17:54:21 -07:00
Chandra Seetharaman
fbd7ab3eb5 [SCSI] scsi_dh: add lsi rdac device handler
This patch provides the device handler to support the LSI RDAC SCSI
based storage devices.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:23:40 -05:00