Commit Graph

1529 Commits

Author SHA1 Message Date
Ingo Molnar
9e3ee1c39c Merge branch 'linus' into cpus4096
Conflicts:

	kernel/stop_machine.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 23:32:00 +02:00
Ingo Molnar
414f746d23 Merge branch 'linus' into cpus4096 2008-07-28 21:14:43 +02:00
Thomas Gleixner
b032bf70df ACPI/CPUIDLE: prevent setting pm_idle to NULL
pm_idle_save resp. pm_idle_old can be NULL when the restore code in
acpi_processor_cst_has_changed() resp. cpuidle_uninstall_idle_handler()
is called. This can set pm_idle unconditinally to NULL, which causes the
kernel to panic when calling pm_idle in the x86 idle code. This was
covered by an extra check for !pm_idle in the x86 idle code, which was
removed during the x86 idle code refactoring.

Instead of restoring the pm_idle check in the x86 code prevent the
acpi/cpuidle code to set pm_idle to NULL.

Reported by: Dhaval Giani http://lkml.org/lkml/2008/7/2/309
Based on a debug patch from Ingo Molnar

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 08:31:58 -07:00
Linus Torvalds
a048d3aff8 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: fix modular build
  ftrace: disable tracing on acpi idle calls
  ftrace: remove latency-tracer leftover
  ftrace: only trace preempt off with preempt tracer
  ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
2008-07-26 13:25:47 -07:00
Mike Travis
0bc3cc03fa cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
* Replace previous instances of the cpumask_of_cpu_ptr* macros
    with a the new (lvalue capable) generic cpumask_of_cpu().

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:40:33 +02:00
Steven Rostedt
dcf3099745 ftrace: disable tracing on acpi idle calls
The acpi idle waits calls local_irq_save and then uses mwait to go into
idle. The tracer gets reenabled at local_irq_save but does not detect that
the idle allows for wake ups.

This patch adds code to disable the tracing when acpi puts the CPU to idle.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 14:42:21 +02:00
Linus Torvalds
1481b9109f Merge branch 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6
* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
  acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=y
  ACPI: thinkpad-acpi: don't misdetect in get_thinkpad_model_data() on -ENOMEM
  ACPI: thinkpad-acpi: bump up version to 0.21
  ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill support
  ACPI: thinkpad-acpi: WLSW overrides other rfkill switches
  ACPI: thinkpad-acpi: prepare for bluetooth and wwan rfkill support
  ACPI: thinkpad-acpi: consolidate wlsw notification function
  ACPI: thinkpad-acpi: minor refactor on radio switch init
  Revert "ACPI: don't walk tables if ACPI was disabled"
  Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled."
  Revert "Fix FADT parsing"
  ACPI : Set FAN device to correct state in boot phase
  ACPI: Ignore _BQC object when registering backlight device
  ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptors
2008-07-24 13:57:37 -07:00
Linus Torvalds
5042d99795 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fixup sparse endianness warnings in proc.c
  PCI PM: make more PCI PM core functionality available to drivers
  PCI/DMAR: don't assume presence of RMRRs
  PCI hotplug: fix error path in pci_slot's register_slot
2008-07-24 13:57:13 -07:00
Carlos Corbacho
e41fb7c58e pm: acpi pm: add DMI quirk list for ACPI 1.0 suspend ordering
There are a few BIOSes that we know of already that need to use the ACPI 1.0
suspend order.  This appears to be only be a small minority of mostly nVidia
based systems.

Based on observation of Windows behaviour, it's clear that Windows is also
doing maintaining its own list of broken hardware that needs this workaround.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:24 -07:00
Shaohua Li
bdfe6b7c68 pm: acpi hibernation: utilize hardware signature
ACPI defines a hardware signature.  BIOS calculates the signature according to
hardware configure and if hardware changes while hibernated, the signature
will change.  In that case, S4 resume should fail.

Still, there may be systems on which this mechanism does not work correctly,
so it is better to provide a workaround for them.  For this reason, add a new
switch to the acpi_sleep= command line argument allowing one to disable
hardware signature checking.

[shaohua.li@intel.com: build fix]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <Valdis.Kletnieks@vt.edu>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:24 -07:00
Akinobu Mita
e108526e77 move memory_read_from_buffer() from fs.h to string.h
James Bottomley warns that inclusion of linux/fs.h in a low level
driver was always a danger signal.  This patch moves
memory_read_from_buffer() from fs.h to string.h and fixes includes in
existing memory_read_from_buffer() users.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00
Linus Torvalds
26dcce0fab Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23 18:37:44 -07:00
Alex Chiang
e4268aad42 PCI hotplug: fix error path in pci_slot's register_slot
Juha Leppnen noticed that an error path in register_slot() wasn't
returning appropriately, leading to a condition where we might access a
kfree'ed pointer, so let's fix that.

Additionally, fix up the copyright information in the file while
we're in there.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-22 11:18:17 -07:00
Greg Kroah-Hartman
fc3a8828b1 driver core: fix a lot of printk usages of bus_id
We have the dev_printk() variants for this kind of thing, use them
instead of directly trying to access the bus_id field of struct device.

This is done in order to remove bus_id entirely.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:53 -07:00
Ingo Molnar
f88133d76e acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=y
-tip testing found the following boot crash on 32-bit x86 (Core2Duo
laptop) yesterday:

[    5.606664] scsi4 : ata_piix
[    5.606664] scsi5 : ata_piix
[    5.606664] ACPI Error (psargs-0358): [\_SB_.PCI0.LPC_.EC__.BSTA] Namespace lookup failure, AE_NOT_FOUND
[    5.606664] ACPI Error (psparse-0530): ACPI Error (nsnames-0186): Invalid NS Node (f7c0e960) while traversing path [20080609]
[    5.606664] BUG: unable to handle kernel NULL pointer dereference at 0000000f
[    5.606664] IP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80
[    5.609997] *pdpt = 0000000000a03001 *pde = 0000000000000000
[    5.609997] Oops: 0002 [#1] SMP
[    5.609997]
[    5.609997] Pid: 1, comm: swapper Not tainted (2.6.26-tip-03965-gbbfb62e-dirty #3153)
[    5.609997] EIP: 0060:[<80339e2f>] EFLAGS: 00010286 CPU: 0
[    5.609997] EIP is at acpi_ns_build_external_path+0x1f/0x80
[    5.609997] EAX: f7c18c18 EBX: ffffffff ECX: 00000010 EDX: 00000000
[    5.609997] ESI: f7c18c18 EDI: 00000010 EBP: f7c4dc28 ESP: f7c4dc18
[    5.609997]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    5.609997] Process swapper (pid: 1, ti=f7c4c000 task=f7c50000 task.ti=f7c4c000)
[    5.609997] Stack: 00000000 00000000 f7c18c18 f7c4dc48 f7c4dc40 80339ed0 00000000 f7c18c18
[    5.609997]        8084c1b6 8084c1b6 f7c4dc58 8033a60a 00000000 00000010 00000000 f7c18c18
[    5.609997]        f7c4dc70 8033a68f f7c18c18 00000000 f6de7600 00000005 f7c4dc98 8033c34d
[    5.609997] Call Trace:
[    5.609997]  [<80339ed0>] ? acpi_ns_handle_to_pathname+0x40/0x72
[    5.609997]  [<8033a60a>] ? acpi_ns_print_node_pathname+0x2c/0x61
[    5.609997]  [<8033a68f>] ? acpi_ns_report_method_error+0x50/0x6d
[    5.609997]  [<8033c34d>] ? acpi_ps_parse_aml+0x149/0x2f9
[    5.609997]  [<8033d6dd>] ? acpi_ps_execute_method+0x132/0x201
[    5.609997]  [<80339d19>] ? acpi_ns_evaluate+0x1ad/0x258
[    5.609997]  [<803406c4>] ? acpi_ut_evaluate_object+0x55/0x18f
[    5.609997]  [<803408b7>] ? acpi_ut_execute_STA+0x22/0x7a
[    5.609997]  [<8033a907>] ? acpi_get_object_info+0x131/0x1be
[    5.609997]  [<80344bb2>] ? do_acpi_find_child+0x22/0x4b
[    5.609997]  [<8033b855>] ? acpi_ns_walk_namespace+0xa5/0x124
[    5.609997]  [<803394f3>] ? acpi_walk_namespace+0x54/0x74
[    5.609997]  [<80344b90>] ? do_acpi_find_child+0x0/0x4b
[    5.609997]  [<80344b85>] ? acpi_get_child+0x38/0x43
[    5.609997]  [<80344b90>] ? do_acpi_find_child+0x0/0x4b
[    5.609997]  [<804d0148>] ? ata_acpi_associate+0xb5/0x1b5
[    5.609997]  [<804c6ecb>] ? ata_scsi_add_hosts+0x8e/0xdc
[    5.609997]  [<804c40c8>] ? ata_host_register+0x9f/0x1d6
[    5.609997]  [<804cbc7f>] ? ata_pci_sff_activate_host+0x179/0x19f
[    5.609997]  [<804cdd45>] ? ata_sff_interrupt+0x0/0x1c7
[    5.609997]  [<8069b033>] ? piix_init_one+0x569/0x5b0
[    5.609997]  [<801bd400>] ? sysfs_ilookup_test+0x0/0x11
[    5.609997]  [<801987d7>] ? ilookup5_nowait+0x29/0x30
[    5.609997]  [<802efc7e>] ? pci_match_device+0x99/0xa3
[    5.609997]  [<802efd3c>] ? pci_device_probe+0x39/0x59
[    5.609997]  [<803bc4af>] ? driver_probe_device+0xa0/0x11b
[    5.609997]  [<803bc564>] ? __driver_attach+0x3a/0x59
[    5.609997]  [<803bbde3>] ? bus_for_each_dev+0x36/0x58
[    5.609997]  [<803bc354>] ? driver_attach+0x14/0x16
[    5.609997]  [<803bc52a>] ? __driver_attach+0x0/0x59
[    5.609997]  [<803bc161>] ? bus_add_driver+0x93/0x196
[    5.609997]  [<803bc773>] ? driver_register+0x71/0xcd
[    5.609997]  [<802eff05>] ? __pci_register_driver+0x3f/0x6e
[    5.609997]  [<809af7ff>] ? piix_init+0x14/0x24
[    5.609997]  [<80984568>] ? kernel_init+0x128/0x269
[    5.609997]  [<809af7eb>] ? piix_init+0x0/0x24
[    5.609997]  [<802e2758>] ? trace_hardirqs_on_thunk+0xc/0x10
[    5.609997]  [<80116aef>] ? restore_nocheck_notrace+0x0/0xe
[    5.609997]  [<80984440>] ? kernel_init+0x0/0x269
[    5.609997]  [<80984440>] ? kernel_init+0x0/0x269
[    5.609997]  [<80117d87>] ? kernel_thread_helper+0x7/0x10
[    5.609997]  =======================
[    5.609997] Code: 75 02 b3 01 8d 43 01 8b 5d fc c9 c3 55 89 e5 57 89 cf 56 53 89 d3 4b 83 ec 04 83 fb 03 89 55 f0 77 09 c6 01 5c c6 41 01 00 eb 59 <c6> 04 19 00 8b 55 f0 8d 34 11 89 c2 eb 19 8b 42 08 83 eb 05 89
[    5.609997] EIP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80 SS:ESP 0068:f7c4dc18
[    5.613331] Kernel panic - not syncing: Fatal exception
[    5.613331] Rebooting in 1 seconds..[    4.646664] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

I have bisected it down to:

 # bad:  [5b664cbe] Merge branch 'upstream-linus' of git://git.kernel.
 # good: [bce7f795] Linux 2.6.26
 # good: [e18425ab] Merge branch 'tracing/for-linus' of git://git.kern
 # good: [cadc7236] Merge branch 'bkl-removal' into next
 # good: [4515889a] Merge branch 'merge' of git://git.kernel.org/pub/s
 # good: [42fdd14e] Merge git://git.kernel.org/pub/scm/linux/kernel/gi
 # good: [8a0ca91f] Merge branch 'for-linus' of git://git.kernel.org/p
 # bad:  [0af4b8cb] ACPI: Introduce new device wakeup flag 'prepared'
 # good: [fe997407] PCI: construct one fakephp slot per PCI slot
 # bad:  [531f254a] PCIE: aer: use dev_printk when possible
 # bad:  [15650a20] x86/PCI: fixup early quirk probing
 # good: [0e6859d9] ACPI PM: Remove obsolete Toshiba workaround
 # bad:  [8344b566] PCI: ACPI PCI slot detection driver
 # good: [f46753c9] PCI: introduce pci_slot

 | 8344b568f5 is first bad commit
 | commit 8344b568f5
 | Author: Alex Chiang <achiang@hp.com>
 | Date:   Tue Jun 10 15:30:42 2008 -0600
 |
 |     PCI: ACPI PCI slot detection driver
 |
 |     Detect all physical PCI slots as described by ACPI, and create entries in
 |     /sys/bus/pci/slots/.

I.e. the new CONFIG_ACPI_PCI_SLOT=y option was causing this crash.

But the bug is not mainly in this new PCI code - that code was just
hitting the ACPI code in a new way which made ACPI break.

The crash signature shows that we are crashing on this instruction:

   movb $0x0, (%ecx, %ebx, 1)

ECX and EBX are 0x10 and -1. It's this line in
drivers/acpi/namespace/nsnames.c's acpi_ns_build_external_path():

        name_buffer[index] = 0;

I.e. name_buffer is 0x10 and index is -1.

index -1 corresponds to size 0, and name_buffer 0x10 is slab's
ZERO_SIZE_PTR special-case for zero-sized allocations.

I.e. when we called acpi_ns_handle_to_pathname(), we got required_size
of 0 due to an error condition, but this is passed to the ACPI allocator
unconditionally:

        required_size = acpi_ns_get_pathname_length(node);

        /* Validate/Allocate/Clear caller buffer */

        status = acpi_ut_initialize_buffer(buffer, required_size);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

Where acpi_ut_initialize_buffer(), through many (unnecessary) layers,
ends up calling kzalloc(0). Which returns 0x10 and that then causes the
crash later on.

So fix both callers of acpi_ns_get_pathname_length(), which can return 0
in case of an invalid node.

Also add a WARN_ON() against zero sized allocations in
acpi_ut_initialize_buffer() to make it easier to find similar instances
of this bug.

I have tested this patch for the past 24 hours and the crash has not
reappeared.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-22 00:27:48 +02:00
Ingo Molnar
eb6a12c242 Merge branch 'linus' into cpus4096-for-linus
Conflicts:

	net/sunrpc/svc.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21 17:19:50 +02:00
Thomas Gleixner
5e248ac9a5 APCI: revert another duplicated patch
commit d185705690 ("ACPI: don't walk
tables if ACPI was disabled") is another superfluous duplicate commit
caused by git -> quilt -> git conversion.

Revert it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:14:57 -07:00
Thomas Gleixner
392798a17b APCI: revert duplicated patch
commit 816c2eda3c ("dock: bay: Don't call
acpi_walk_namespace() when ACPI is disabled.") was merged between
2.6.26-rc8 and -rc9)

Due to rebasing the ACPI tree via quilt the same patch got applied again
via commit cc7e51666d ("dock: bay: Don't
call acpi_walk_namespace() when ACPI is disabled.")

Revert it, as it is obviously bogus.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:14:57 -07:00
Mike Travis
65c0118453 cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
* This patch replaces the dangerous lvalue version of cpumask_of_cpu
    with new cpumask_of_cpu_ptr macros.  These are patterned after the
    node_to_cpumask_ptr macros.

    In general terms, if there is a cpumask_of_cpu_map[] then a pointer to
    the cpumask_of_cpu_map[cpu] entry is used.  The cpumask_of_cpu_map
    is provided when there is a large NR_CPUS count, reducing
    greatly the amount of code generated and stack space used for
    cpumask_of_cpu().  The pointer to the cpumask_t value is needed for
    calling set_cpus_allowed_ptr() to reduce the amount of stack space
    needed to pass the cpumask_t value.

    If there isn't a cpumask_of_cpu_map[], then a temporary variable is
    declared and filled in with value from cpumask_of_cpu(cpu) as well as
    a pointer variable pointing to this temporary variable.  Afterwards,
    the pointer is used to reference the cpumask value.  The compiler
    will optimize out the extra dereference through the pointer as well
    as the stack space used for the pointer, resulting in identical code.

    A good example of the orthogonal usages is in net/sunrpc/svc.c:

	case SVC_POOL_PERCPU:
	{
		unsigned int cpu = m->pool_to[pidx];
		cpumask_of_cpu_ptr(cpumask, cpu);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, cpumask);
		return 1;
	}
	case SVC_POOL_PERNODE:
	{
		unsigned int node = m->pool_to[pidx];
		node_to_cpumask_ptr(nodecpumask, node);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, nodecpumask);
		return 1;
	}

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:57 +02:00
Ingo Molnar
bb2c018b09 Merge branch 'linus' into cpus4096
Conflicts:

	drivers/acpi/processor_throttling.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:00:54 +02:00
Andi Kleen
725c3a2d70 Revert "ACPI: don't walk tables if ACPI was disabled"
This reverts commit d185705690.

Double commit, noticed by Thomas Gleixner.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18 09:12:49 +02:00
Andi Kleen
97d2ef5686 Merge branch 'merge' into release-2.6.27 2008-07-18 01:43:31 +02:00
Andi Kleen
e1469c34eb Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled."
Revert double commit by mistake. Noticed by Thomas Gleixner.

This reverts commit cc7e51666d.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18 01:43:08 +02:00
Andi Kleen
b1d77fae0c Revert "Fix FADT parsing"
This reverts commit 01a5bba576.

There seem to be some FADTs around with bogus information
in the v2 fields. Revert this patch for now until
this can be properly resolved.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18 01:42:20 +02:00
Zhao Yakui
ea51011a27 ACPI : Set FAN device to correct state in boot phase
Subject:ACPI: Set FAN device to correct state in boot phase
From: Zhao Yakui <yakui.zhao@intel.com>

On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be
turned on. But if the temperature is below the threshold, the corresponding
FAN device should be turned off in the course of loading thermal driver.

So it is necessary to set the FAN device to the correct state in course of loading
the thermal driver.

http://bugzilla.kernel.org/show_bug.cgi?id=8049

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18 01:41:50 +02:00
Zhao Yakui
c2c789057f ACPI: Ignore _BQC object when registering backlight device
According to acpi spec , the objectes of  _BCL and _BCM are required if
integrated LCD is present and supports brightness level and the _BQC is
the optional object. So the _BQC object will be ignored when the backlight
device is registered.
At the same time when there is no _BQC object, the current brightness will be
set to the maximum.

http://bugzilla.kernel.org/show_bug.cgi?id=10206

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui  <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18 01:41:49 +02:00
Bjorn Helgaas
4a5e3638b1 ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptors
Silently ignore _PRS End Tags.  We already ignore Start Dependent Functions in
_PRS, and we already ignore End Tags in _CRS, so we might as well ignore End
Tags in _PRS as well.

Silently ignore _PRS IRQ descriptors that mention no interrupts.  The spec
allows this (section 6.4.2.1 in ACPI 3.0b spec), and it probably means the
interrupt link can't be configured at all.

This patch doesn't change any functional behavior; it just removes confusing
complaints like these:

    ACPI: Blank IRQ resource
    ACPI: Resource is not an IRQ entry

when parsing _PRS data "23 00 00 18 79 00" from an IBM xSeries 335 dual
Pentium IV Xeon 2.40 GHz machine.  For more details, see
    http://bugzilla.kernel.org/show_bug.cgi?id=11049

The "23 00 00 18" part is a three-byte-long small IRQ resource with no bits set
in the IRQ mask ("00 00"), and level-triggered, active low, shareable ("18").

The "79 00" is an End Tag (type 0x7).  It is superfluous since there is no
Start Dependent Function tag and there are no resources after it, but it is
harmless.

Thanks to Gabriele Trombetti <g.trombetti.lkrnl1213@logicschema.com>
(aka Kurk) for reporting this and testing the patch.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18 01:41:49 +02:00
Linus Torvalds
dc7c65db28 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
  Revert "x86/PCI: ACPI based PCI gap calculation"
  PCI: remove unnecessary volatile in PCIe hotplug struct controller
  x86/PCI: ACPI based PCI gap calculation
  PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
  PCI PM: Fix pci_prepare_to_sleep
  x86/PCI: Fix PCI config space for domains > 0
  Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
  PCI: Simplify PCI device PM code
  PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
  PCI ACPI: Rework PCI handling of wake-up
  ACPI: Introduce new device wakeup flag 'prepared'
  ACPI: Introduce acpi_device_sleep_wake function
  PCI: rework pci_set_power_state function to call platform first
  PCI: Introduce platform_pci_power_manageable function
  ACPI: Introduce acpi_bus_power_manageable function
  PCI: make pci_name use dev_name
  PCI: handle pci_name() being const
  PCI: add stub for pci_set_consistent_dma_mask()
  PCI: remove unused arch pcibios_update_resource() functions
  PCI: fix pci_setup_device()'s sprinting into a const buffer
  ...

Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.
2008-07-16 17:25:46 -07:00
Jan Beulich
01a5bba576 Fix FADT parsing
The (1.0 inherited) separate length fields in the FADT are byte granular.
Further, PM1a/b may have distinct lengths and live in distinct address spaces.
 acpi_tb_convert_fadt() should account for all of these conditions.

Apart from these changes I'm puzzled by the fact that, not just for
acpi_gbl_xpm1{a,b}_enable, acpi_hw_low_level_{read,write}() get an explicit
size passed rather than using the size found in the passed GAS.  What happens
on a platform that defines PM1{a,b} wider than 16 bits?  Of course,
acpi_hw_low_level_{read,write}() at present are entirely un-prepared to deal
with sizes other than 8, 16, or 32, not to speak of a non-zero bit_offset or
access_width...

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16 23:27:08 +02:00
Aaron Durbin
4d3870431d Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.
Signed-off-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16 23:27:08 +02:00
Bjorn Helgaas
c83642d512 ACPI: use dev_printk when possible
Convert printks to use dev_printk().  The most obvious change will
be messages like this:

   -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31
   +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:07 +02:00
Julia Jomantaite
469778c174 ACPI: video: fix brightness allocation
Fix use of uninitialized device->brightness.

Signed-off-by: Julia Jomantaite <julia.jomantaite@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:05 +02:00
Zhao Yakui
2a2a64714d ACPI: Disable MWAIT via DMI on broken Compal board
If a system matches in this DMI table,
Linux will disable MWAIT support for idle.
ie. "idle=nomwait" is automatically invoked
and C1_FFH and C2C3_FFH access mode are disabled.

http://bugzilla.kernel.org/show_bug.cgi?id=10807
http://bugzilla.kernel.org/show_bug.cgi?id=10914

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Zhao Yakui
da5e09a1b3 ACPI : Create "idle=nomwait" bootparam
"idle=nomwait" disables the use of the MWAIT
instruction from both C1 (C1_FFH) and deeper (C2C3_FFH)
C-states.

When MWAIT is unavailable, the BIOS and OS generally
negotiate to use the HALT instruction for C1,
and use IO accesses for deeper C-states.

This option is useful for power and performance
comparisons, and also to work around BIOS bugs
where broken MWAIT support is advertised.

http://bugzilla.kernel.org/show_bug.cgi?id=10807
http://bugzilla.kernel.org/show_bug.cgi?id=10914

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Zhao Yakui
c1e3b377ad ACPI: Create "idle=halt" bootparam
"idle=halt" limits the idle loop to using
the halt instruction.  No MWAIT, no IO accesses,
no C-states deeper than C1.

If something is broken in the idle code,
"idle=halt" is a less severe workaround
than "idle=poll" which disables all power savings.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Zhang Rui
71b58cbb0c ACPI: Enhance /sys/firmware/interrupts to allow enable/disable/clear from user-space
Allow users to enable/disable/clear a specific & valid GPE/Fixed Event
in user space.

This is useful for debugging, especially for some
interrupt storm issues.

All wakeup GPEs are disabled and they can not be enabled at runtime,
and we mark them as invalid.

All GPEs that don't have a _Lxx/_Exx method are marked as invalid.

All Fixed Events that don't have an event handler are marked as invalid
and they can't be enabled until an event handler is registered.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ling Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
b53ce3f718 ACPICA: Fix mutex debug code for wrong loop termination value
Loop was terminating one iteration early, missing one of the
debugger handshake mutexes. Linn Crosetto.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
fd0a43276d ACPICA: Cleanup of _PRT parsing code
Removed extraneous else clauses, other general cleanup.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
71d993e115 ACPICA: Cleanup debug operand dump mechanism
Eliminated unnecessary operands; eliminated use of negative index
in loop.  Operands now displayed in correct order, not backwards.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
5a1a57efeb ACPICA: Fix for invalid large array index on 64-bit systems
This problem was introduced in 20080514 as a result of the
elimination of the acpi_native_uint type. Code uses a negative
array index, which should be eliminated.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
19d0cfe9dd ACPICA: Update DMAR and SRAT table definitions
Synchronized tables with current specifications.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
d0e184abc5 ACPICA: Workaround for reversed _PRT entries from BIOS
Some BIOSs erroneously reverse the _PRT SourceName and the
SourceIndex.  Detect and repair this problem. MS ACPI also allows
and repairs this problem, thus ACPICA must also.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
4b8ed63167 ACPICA: Add const qualifier for appropriate string constants
Mostly MODULE_NAME and printf format strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00
Bob Moore
b52437641e ACPICA: Several lint changes, no functional changes
Remove pointer cast warnings and fix for a debug printf.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:03 +02:00
Bob Moore
d97b4358da ACPICA: Removed unused include files from source files
From lint.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:03 +02:00
Bob Moore
67a119f990 ACPICA: Eliminate acpi_native_uint type v2
No longer needed; replaced mostly with u32, but also acpi_size
where a type that changes 32/64 bit on 32/64-bit platforms is
required.

v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning.
from David Howells

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:03 +02:00
Bob Moore
11f2a61ab4 ACPICA: Fix possible negative array index in acpi_ut_validate_exception
Added NULL fields to the exception string arrays to eliminate
the -1 subtraction on the SubStatus field.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:03 +02:00
Bob Moore
c91d924e3a ACPICA: Fix for hang on GPE method invocation
Fixes problem where the new method argument count validation mechanism
will enter an infinite loop when a GPE method is dispatched.
Problem fixed be removing the obsolete code that passes GPE block
information to the notify handler via the control method parameter pointer.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:03 +02:00
Bob Moore
f3454ae810 ACPICA: Add argument count checking to control method invocation via acpi_evaluate_object
Error if too few arguments, warning if too many. This applies
only to external programmatic control method execution, not
method-to-method calls within the AML.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:03 +02:00
Rafael J. Wysocki
741438b500 ACPI PM: Remove obsolete Toshiba workaround
Remove the obsolete workaround for a Toshiba Satellite 4030cdt
S1 problem from drivers/acpi/sleep/main.c .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:02 +02:00