Commit Graph

415 Commits

Author SHA1 Message Date
Linus Torvalds
fa395aaec8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...
2009-12-09 19:52:01 -08:00
Jiri Kosina
447753d977 Merge branches 'bkl-removal', 'upstream' and 'upstream-fixes' into for-linus 2009-12-07 18:30:49 +01:00
Peter Hutterer
9db630b48a HID: add multi-input quirk for NextWindow Touchscreen.
These touchscreens are mounted onto HP TouchSmart and the Dell Studio One
19. Without a quirk they report a wrong button set and the x/y coordinates
through ABS_Z/ABS_RX, confusing the higher levels (most notably X.Org's
evdev driver).

Device id 0x003 covers models 1900, 2150, and 2700 [1] though testing could
only be performed on a model 1900.

[1] http://www.nextwindow.com/nextwindow_support/latest_tech_info.html

Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-03 10:51:32 +01:00
Jiri Kosina
e8d0eab4d9 HID: add support for Acan FG-8100 barcode reader
Acan FG-8100 barcode reader (0x04b4/0xbca1) has vendor ID of
cypress and requires the same MIN/MAX swap descriptor quirk
as other barcode readers from cypress.

Reported-by: Stijn Ghesquiere <stijn@applesnail.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-02 22:54:11 +01:00
Jiri Kosina
66d61bec69 HID: make Media key on Logitech DiNovo Mini work
Put proper mapping of Media key on Logitech DiNovo Mini.

According to the specification from Logitech webpage, this
key is intended to launch a Media center.

Reported-by: Stefan Plattner <Stefan.Plattner@ilogs.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-25 16:20:52 +01:00
Márton Németh
6236dfaa90 Input: do not overwrite the first part of phys string
Use strlcat() to append a string to the previously created first part.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23 08:50:52 -08:00
Jiri Kosina
24985cf686 HID: support Logitech/3DConnexion SpaceTraveler and SpaceNavigator
These devices wrongly report their axes as relative instead of absolute.

Fix this in up report descriptor of the device before it enters the parser.

Reported-by: simon.windows@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-13 10:45:53 +01:00
Jiri Kosina
6c85773043 HID: remove BKL from hiddev_ioctl_usage()
The race between ioctl and disconnect is guarded by low level
hiddev device mutex (existancelock) since the commit
07903407 ("HID: hiddev cleanup -- handle all error conditions
properly"), therefore we can remove the lock_kernel() from
hiddev_ioctl_usage().

Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-05 18:59:03 +01:00
Jiri Kosina
5b915d9e6d HID: fixup quirk for NCR devices
NCR devices are terminally broken by design -- they claim themselves to contain
proper input applications in their HID report descriptor, but behave very badly
if treated in standard way.

According to NCR developers, the devices get confused when queried for reports
in a standard way, rendering them unusable.

NCR is shipping application called "RPSL" that can be used to drive these
devices through hiddev, under the assumption that in-kernel driver doesn't
perform initial report query.
If it does, neither in-kernel nor hiddev-based driver can operate with these
devices any more.

Introduce a quirk that skips the report query for all NCR devices. The previous
NOGET quirk was wrong and had been introduced because I misunderstood the nature
of brokenness of these devices.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-05 14:08:03 +01:00
Anssi Hannula
1168df7e1c HID: pidff - fix unnecessary loop iterations on reset
When encountering a strange value in the pool report, pidff_reset
will always refetch the report 20 times, even if one of the retries
results in a sane value. This is because a temporary variable being
used to store the value is not being updated inside the loop.

Fix it by using the value directly in the loop.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-04 10:04:08 +01:00
Keith Rutkowski
73cdcf567a HID: add NOGET quirk for another device from CH Products
This patch was applied to Fedora 11's 2.6.30.8-64 kernel and adds the
NOGET quirk for CH Products industrial class joystick(s).  It is like
the previous CH Products NOGET quirk patch for their consumer class
joysticks.  Without the quirk, the joystick would only be detected and
would not function at all in kernels >= 2.6.29.  It was tested with a CH
Products 3-axis 5-button industrial joystick, product #HG-434IS000-U-217.

Signed-off-by: Keith Rutkowski <rutkowski@signatureresearchinc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-20 02:33:10 +02:00
Jiri Kosina
ccabcd2dbe HID: remove useless DRIVER_VERSION macro
DRIVER_VERSION has no use whatosoever, it has been set to "2.6"
for ages. Remove it.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13 22:36:57 +02:00
Jiri Kosina
88adb72bcf HID: fix MODULE_AUTHOR usage in HID modules
Remove unused (in usbhid module) DRIVER_AUTHOR macrco and properly
use multiple MODULE_AUTHOR() instances in both modules.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13 22:36:57 +02:00
Lamarque Vieira Souza
eb8141ccd3 HID: blacklist Acer Ferrari 4005 optical mouse
Marks Acer Bluetooth Optical Rechargeable Mouse from Ferrari 4005 notebook to
be ignored by hid core. This change makes hid core to use input session instead
of hid session with that mouse. With hid session the mouse cursor moves too
laggy, using input session corrects this problem.

Signed-off-by: Lamarque V. Souza <lamarque@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13 22:36:56 +02:00
Linus Torvalds
03266d28ca Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix possible deadlock in hidraw_read
  HID: fix kerneldoc comment for hid_input_report()
  HID: add __init/__exit macros to twinhan.c
2009-10-13 10:10:33 -07:00
Jiri Kosina
b0e14951ee HID: fix possible deadlock in hidraw_read
If the loop in hidraw_read() loops more than once, then we might
end up trying to acquire already locked mutex, casuing a deadlock.

Reported-by: iceberg <iceberg@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-12 11:25:56 +02:00
Alexey Dobriyan
a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Jiri Kosina
ff9b00a226 HID: fix kerneldoc comment for hid_input_report()
The kerneldoc comment for 'interrupt' has already confused a lot
of people, as it is simply wrong. It doesn't carry the information
about the context, but is used to distinguish between two fundamental
types of low-level transport transfers -- interrupt vs. control.

Make this clear in the comment.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-01 16:03:13 +02:00
Peter Huewe
fa59530267 HID: add __init/__exit macros to twinhan.c
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of the twinhan driver in hid.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-29 13:58:20 +02:00
Linus Torvalds
50223e486c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Remove duplicate Kconfig entry
  HID: consolidate connect and disconnect into core code
  HID: fix non-atomic allocation in hid_input_report
2009-09-22 07:51:28 -07:00
Kay Sievers
e454cea20b Driver-Core: extend devnode callbacks to provide permissions
This allows subsytems to provide devtmpfs with non-default permissions
for the device node. Instead of the default mode of 0600, null, zero,
random, urandom, full, tty, ptmx now have a mode of 0666, which allows
non-privileged processes to access standard device nodes in case no
other userspace process applies the expected permissions.

This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 12:50:38 -07:00
Alessandro Guido
a2d693cf65 HID: Remove duplicate Kconfig entry
Signed-off-by: Alessandro Guido <ag@alessandroguido.name>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-17 15:47:26 +02:00
Jiri Kosina
c4c259bcc2 HID: consolidate connect and disconnect into core code
HID core registers input, hidraw and hiddev devices, but leaves
unregistering it up to the individual driver, which is not really nice.
Let's move all the logic to the core.

Reported-by: Marcel Holtmann <marcel@holtmann.org>
Reported-by: Brian Rogers <brian@xyzw.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-17 15:15:11 +02:00
Jiri Kosina
d1ff65226c HID: fix non-atomic allocation in hid_input_report
'interrupt' variable can't be used to safely determine whether
we are running in atomic context or not, as we might be called from
during control transfer completion through hid_ctrl() in atomic
context with interrupt == 0.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-15 12:31:06 +02:00
Jiri Kosina
8123e8f7c8 Merge branches 'upstream', 'upstream-fixes' and 'debugfs' into for-linus 2009-09-13 20:09:41 +02:00
Jan Scholz
42960a1300 HID: completely remove apple mightymouse from blacklist
Commit fa047e4f6f "HID: fix inverted
wheel for bluetooth version of apple mighty mouse" is incomplete. If
we remove Apple MightyMouse (bluetooth version) from the list of
apple_devices in drivers/hid/hid-apple.c we have to remove it from
hid_blacklist in drivers/hid/hid-core.c as well.

Signed-off-by: Jan Scholz <Scholz@fias.uni-frankfurt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-26 13:18:51 +02:00
Jiri Kosina
affbb8c6e6 HID: support larger reports than 64 bytes in hiddev
hiddev userspace driver uses a rignbuffer to store the parsed usages
that should be returned through read(). This buffer is 64 bytes long,
which is sufficient for queueing single USB 1.0 low-speed report, which
is of maximum size 48 bytes.

There are however USB HID devices which are full-speed USB devices, and
therefore they are free to produce reports 64 bytes long. This is correctly
handled by HID core, but read() on hiddev node gets stuck forever, because
the ring buffer loops infinitely (as it is exactly 64 bytes long as well),
never advancing the buffer pointer.

Plus, the core driver is ready to handle highspeed devices, so we should be
able to handle reports from such devices in the hiddev driver as well, which
means we need larger ringbuffer.

Reported-by: Michael Zeisel <michael.zeisel@philips.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-20 12:04:14 +02:00
H Hartley Sweeten
52cfc61bf9 HID: local function should be static
__usbhid_submit_report() is a local function wrapped by the exported
symbol usbhid_submit_report(). As such, it should be static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc:  Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-18 13:57:10 +02:00
Henning Glawe
4cfae3e804 HID: ignore Philips IEEE802.15.4 RF Dongle
This usb device claims to be of HID class, but is in fact a 802.15.4
lowpan transceiver, therefore the generic HID driver cannot operate this
device. A separate driver for this device will be written for this using
the new 802.15.4 stack.

Signed-off-by: Henning Glawe <glaweh@debian.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08 11:56:11 +02:00
Jarod Wilson
31f7fd795d HID: ignore all recent SoundGraph iMON devices
After some inspection of the Windows iMON driver, several additional
device IDs were added to the lirc_imon driver. At least a few of these
have been seen in the wild, and require manual quirking to keep the
usbhid driver from binding to them. Rather than list out every single
device, ignore the entire device ID range, 0x0034 - 0x0046. Some of
these may not advertise themselves as HID devices, but no harm done to
such devices anyway. Does the right thing in brief testing w/my 0x0045
device.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08 11:55:46 +02:00
Julia Lawall
a809dda036 HID: fix memory leak on error patch in debug code
Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08 02:26:10 +02:00
Roel Kluin
44cb2db10d HID: fix overrun in quirks initialization
Check whether index is within bounds before testing the element.

declared in drivers/hid/usbhid/hid-core.c:62:
static char *quirks_param[MAX_USBHID_BOOT_QUIRKS] = ...

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08 02:17:32 +02:00
Julia Lawall
3040c8203d HID: Drop NULL test on list_entry result
list_entry, which is an alias for container_of, cannot return NULL, as
there is no way to add a NULL value to a doubly linked list.

A simplified version of the semantic match that findds this problem is as
follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r@
expression x,E;
statement S1,S2;
position p,p1;
@@

*x = list_entry@p(...)
... when != x = E
*if@p1 (x == NULL) S1 else S2
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:02 +02:00
Bruno Premont
711a680e35 HID: driver for Twinhan USB 6253:0100 remote control
Add explicit key mappings for TwinHan USB HID remote control.

All dummy Ctrl, Alt, Meta, ... key press/release events generated
by the remote are silenced by "unmapping" them. This makes Power and
Volume keys single-key and strips the regular (even while idle) key
release events for Ctrl, Alt, Meta, ...

Signed-off-by: Bruno Premont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:01 +02:00
Peter Huewe
a24f423bdf HID: adding __init/__exit macros to module init/exit functions
Trivial patch which adds the __init and __exit macros to the module_init /
module_exit functions of several HID drivers from drivers/hid/

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:01 +02:00
Ruben Aos Garralda
7a84b1336a HID: add rumble support for Thrustmaster Dual Trigger 3-in-1
This patch enables rumble in Thrustmaster Dual 3-in-1 trigger gamepads (in both
PC and PS3 modes).  It uses the same code as Thrustmaster FireStorm Dual Power 2,
so it only adds new USB IDs to hid-core.c and hid-tmff.c

Signed-off-by: Ruben Aos Garralda <rubenatch@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:01 +02:00
Rafi Rubin
837b47533a HID: ntrig tool separation and pen usages
When both touch and pen are active send a tool announcement before
sending any status changes so that event users may differentiate
which tool is changing.

Restored three usage codes used by the pen.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:01 +02:00
Sergey Senozhatsky
8b424887b6 HID: Avoid double spin_lock_init on usbhid->lock
Avoid double spin_lock_init on usbhid->lock.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:00 +02:00
Jiri Kosina
fd30ea8c87 HID: add force feedback support for Logitech WingMan Formula Force GP
Add force feedback support for Logitech WingMan Formula Force GP
(0x046d/0xc293).

Reported-by: wylda@volny.cz
Tested-by: wylda@volny.cz
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:28:00 +02:00
Robert Schedel
0810b51170 HID: Support new variants of Samsung USB IR receiver (0419:0001)
This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly
reported variants:

* New device variants with 203 byte and 135 byte report descriptors were
  reported to be recognized incorrectly. This patch adds an autodetection for
  those two, using report descriptor size to enable new quirks.

* Any other unknown 0419:0001 variants will now be treated without any quirk
  flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore).

More details:

1. Descriptor size 184 bytes ("Satelco bundled remote")
Already supported since kernel 2.6.25 (my old patch).

2. Descriptor size 203 bytes ("Optronix remote")
This receiver mostly works with the regular HID input driver. Only when some
keys are released, another spurious key press event is interpreted due to
incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should
return a 0 value when no control is asserted, and ranges should go from 1 to
the number of elements. The patch clips the value with a logical range from
1..15 (instead of originally 0..18).

Ticket with more information available at
https://bugs.launchpad.net/bugs/326986

3. Descriptor size 135 bytes ("Gotview remote")
This receiver has a similar issue than the previous one, i.e. it mostly works
with regular HID input, except some key press events get stuck on key release.
The patch clips the array value from 1..14 (instead of originally 0..17).

Ticket with more information available at
http://bugs.archlinux.org/task/15216

4. Other unknown variants (found one report with 218 bytes,
   but no further information about issues)

For such unknown variants we should refrain from changing any device flags.
Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the
quirk table did not yet allow differentiating variants and we
did not expect variants either). Now we should be as strict as
possible and enable it only for the first variant above.

Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23 01:27:59 +02:00
Linus Torvalds
1fd1f28536 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Move dereferences below a NULL test
  HID: hiddev, fix lock imbalance
2009-07-22 09:30:07 -07:00
Julia Lawall
76c317d6e5 HID: Move dereferences below a NULL test
If the NULL test is necessary, then the dereferences should be moved below
the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E,E1;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E=E1
      when != i
  if (E == NULL||...) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-20 00:03:35 +02:00
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Jiri Kosina
55dba52458 HID: fix memory leak on error path in debug code
If hid_get_report() fails, we forgot to free the already allocated buffer
for debugging messages on error path. Fix that up.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-26 10:50:12 +02:00
Jiri Slaby
4859484b09 HID: hiddev, fix lock imbalance
Add omitted BKL to one switch/case.

Cc: Stable <stable@kernel.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-22 11:01:06 +02:00
Kay Sievers
f7a386c5b8 Driver Core: usb: add nodename support for usb drivers.
This adds support for USB drivers to report their requested nodename to
userspace.  It also updates a number of USB drivers to provide the
needed subdirectory and device name to be used for them.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:25 -07:00
Jiri Kosina
6341de0527 Merge branches 'upstream' and 'ntrig-multitouch' into for-linus 2009-06-12 17:42:13 +02:00
Jiri Kosina
cd667ce247 HID: use debugfs for events/reports dumping
This is a followup patch to the one implemeting rdesc representation in debugfs
rather than being dependent on compile-time CONFIG_HID_DEBUG setting.

The API of the appropriate formatting functions is slightly modified -- if
they are passed seq_file pointer, the one-shot output for 'rdesc' file mode
is used, and therefore the message is formatted into the corresponding seq_file
immediately.

Otherwise the called function allocated a new buffer, formats the text into the
buffer and returns the pointer to it, so that it can be queued into the ring-buffer
of the processess blocked waiting on input on 'events' file in debugfs.

'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal
driver state debugging (parser, transport, etc).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 15:20:57 +02:00
Jiri Kosina
a635f9dd83 HID: use debugfs for report dumping descriptor
It is a little bit inconvenient for people who have some non-standard
HID hardware (usually violating the HID specification) to have to
recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective
of the HID report descriptor and observe the parsed events. Plus the messages
are then mixed up inconveniently with the rest of the dmesg stuff.

This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which
represents the kernel's view of report descriptor (both the raw report
descriptor data and parsed contents).

With all the device-specific debug data being available through debugfs, there
is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the
hid module will now only output only driver-specific debugging options, which has
absolutely minimal memory footprint, just a few error messages and one global
flag (hid_debug).

We use the current set of output formatting functions. The ones that need to be
used both for one-shot rdesc seq_file and also for continuous flow of data
(individual reports, as being sent by the device) distinguish according to the
passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer,
otherwise the corresponding seq_file is used for output.

The format of the output is preserved.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 15:20:55 +02:00
Jiri Kosina
fa047e4f6f HID: fix inverted wheel for bluetooth version of apple mighty mouse
Bluetooth version of Apple Mighty mouse (0x05ac/0x030c) doesn't, according to
multiple reports on linux-input@, need the same quirk as the USB version of
this mouse (0x05ac/0x0304) does.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-10 10:25:56 +02:00