Commit Graph

173 Commits

Author SHA1 Message Date
Nick Piggin
423bad6004 mm: add vm_insert_mixed
vm_insert_mixed will insert either a raw pfn or a refcounted struct page into
the page tables, depending on whether vm_normal_page() will return the page or
not.  With the introduction of the new pte bit, this is now a too tricky for
drivers to be doing themselves.

filemap_xip uses this in a subsequent patch.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Nick Piggin
7e675137a8 mm: introduce pte_special pte bit
s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory
model (which is more dynamic than most).  Instead, they had proposed to
implement it with an additional path through vm_normal_page(), using a bit in
the pte to determine whether or not the page should be refcounted:

vm_normal_page()
{
	...
        if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
                if (vma->vm_flags & VM_MIXEDMAP) {
#ifdef s390
			if (!mixedmap_refcount_pte(pte))
				return NULL;
#else
                        if (!pfn_valid(pfn))
                                return NULL;
#endif
                        goto out;
                }
	...
}

This is fine, however if we are allowed to use a bit in the pte to determine
refcountedness, we can use that to _completely_ replace all the vma based
schemes.  So instead of adding more cases to the already complex vma-based
scheme, we can have a clearly seperate and simple pte-based scheme (and get
slightly better code generation in the process):

vm_normal_page()
{
#ifdef s390
	if (!mixedmap_refcount_pte(pte))
		return NULL;
	return pte_page(pte);
#else
	...
#endif
}

And finally, we may rather make this concept usable by any architecture rather
than making it s390 only, so implement a new type of pte state for this.
Unfortunately the old vma based code must stay, because some architectures may
not be able to spare pte bits.  This makes vm_normal_page a little bit more
ugly than we would like, but the 2 cases are clearly seperate.

So introduce a pte_special pte state, and use it in mm/memory.c.  It is
currently a noop for all architectures, so this doesn't actually result in any
compiled code changes to mm/memory.o.

BTW:
I haven't put vm_normal_page() into arch code as-per an earlier suggestion.
The reason is that, regardless of where vm_normal_page is actually
implemented, the *abstraction* is still exactly the same. Also, while it
depends on whether the architecture has pte_special or not, that is the
only two possible cases, and it really isn't an arch specific function --
the role of the arch code should be to provide primitive functions and
accessors with which to build the core code; pte_special does that. We do
not want architectures to know or care about vm_normal_page itself, and
we definitely don't want them being able to invent something new there
out of sight of mm/ code. If we made vm_normal_page an arch function, then
we have to make vm_insert_mixed (next patch) an arch function too. So I
don't think moving it to arch code fundamentally improves any abstractions,
while it does practically make the code more difficult to follow, for both
mm and arch developers, and easier to misuse.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Jared Hulbert
b379d79019 mm: introduce VM_MIXEDMAP
This series introduces some important infrastructure work.  The overall result
is that:

1. We now support XIP backed filesystems using memory that have no
   struct page allocated to them. And patches 6 and 7 actually implement
   this for s390.

   This is pretty important in a number of cases. As far as I understand,
   in the case of virtualisation (eg. s390), each guest may mount a
   readonly copy of the same filesystem (eg. the distro). Currently,
   guests need to allocate struct pages for this image. So if you have
   100 guests, you already need to allocate more memory for the struct
   pages than the size of the image. I think. (Carsten?)

   For other (eg. embedded) systems, you may have a very large non-
   volatile filesystem. If you have to have struct pages for this, then
   your RAM consumption will go up proportionally to fs size. Even
   though it is just a small proportion, the RAM can be much more costly
   eg in terms of power, so every KB less that Linux uses makes it more
   attractive to a lot of these guys.

2. VM_MIXEDMAP allows us to support mappings where you actually do want
   to refcount _some_ pages in the mapping, but not others, and support
   COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM
   filesystem in progress. Future iterations of this filesystem will
   most likely want to migrate pages between pagecache and XIP backing,
   which is where the requirement for mixed (some refcounted, some not)
   comes from.

3. pte_special also has a peripheral usage that I need for my lockless
   get_user_pages patch. That was shown to speed up "oltp" on db2 by
   10% on a 2 socket system, which is kind of significant because they
   scrounge for months to try to find 0.1% improvement on these
   workloads. I'm hoping we might finally be faster than AIX on
   pSeries with this :). My reference to lockless get_user_pages is not
   meant to justify this patchset (which doesn't include lockless gup),
   but just to show that pte_special is not some s390 specific thing that
   should be hidden in arch code or xip code: I definitely want to use it
   on at least x86 and powerpc as well.

This patch:

Introduce a new type of mapping, VM_MIXEDMAP.  This is unlike VM_PFNMAP in
that it can support COW mappings of arbitrary ranges including ranges without
struct page *and* ranges with a struct page that we actually want to refcount
(PFNMAP can only support COW in those cases where the un-COW-ed translations
are mapped linearly in the virtual address, and can only support non
refcounted ranges).

VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not
refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it
needs to avoid refcounting pfn_valid pages eg.  for /dev/mem mappings).

Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:22 -07:00
Nick Piggin
3c18ddd160 mm: remove nopage
Nothing in the tree uses nopage any more.  Remove support for it in the
core mm code and documentation (and a few stray references to it in
comments).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Hugh Dickins
61469f1d51 memcg: when do_swap's do_wp_page fails
Don't uncharge when do_swap_page's call to do_wp_page fails: the page which
was charged for is there in the pagetable, and will be correctly uncharged
when that area is unmapped - it was only its COWing which failed.

And while we're here, remove earlier XXX comment: yes, OR in do_wp_page's
return value (maybe VM_FAULT_WRITE) with do_swap_page's there; but if it
fails, mask out success bits, which might confuse some arches e.g.  sparc.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:14 -08:00
Hugh Dickins
6dbf6d3bb9 memcg: page_cache_release not __free_page
There's nothing wrong with mem_cgroup_charge failure in do_wp_page and
do_anonymous page using __free_page, but it does look odd when nearby code
uses page_cache_release: use that instead (while turning a blind eye to
ancient inconsistencies of page_cache_release versus put_page).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:14 -08:00
Linus Torvalds
664a1566df Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: cpa, fix out of date comment
  KVM is not seen under X86 config with latest git (32 bit compile)
  x86: cpa: ensure page alignment
  x86: include proper prototypes for rodata_test
  x86: fix gart_iommu_init()
  x86: EFI set_memory_x()/set_memory_uc() fixes
  x86: make dump_pagetable() static
  x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr()
2008-02-14 21:23:19 -08:00
Jan Blunck
cf28b4863f d_path: Make d_path() use a struct path
d_path() is used on a <dentry,vfsmount> pair.  Lets use a struct path to
reflect this.

[akpm@linux-foundation.org: fix build in mm/memory.c]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:17:09 -08:00
Ingo Molnar
e8bff74afb x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr()
Jiri Kosina reported the following deadlock scenario with
show_unhandled_signals enabled:

 [   68.379022] gnome-settings-[2941] trap int3 ip:3d2c840f34
 sp:7fff36f5d100 error:0<3>BUG: sleeping function called from invalid
 context at kernel/rwsem.c:21
 [   68.379039] in_atomic():1, irqs_disabled():0
 [   68.379044] no locks held by gnome-settings-/2941.
 [   68.379050] Pid: 2941, comm: gnome-settings- Not tainted 2.6.25-rc1 #30
 [   68.379054]
 [   68.379056] Call Trace:
 [   68.379061]  <#DB>  [<ffffffff81064883>] ? __debug_show_held_locks+0x13/0x30
 [   68.379109]  [<ffffffff81036765>] __might_sleep+0xe5/0x110
 [   68.379123]  [<ffffffff812f2240>] down_read+0x20/0x70
 [   68.379137]  [<ffffffff8109cdca>] print_vma_addr+0x3a/0x110
 [   68.379152]  [<ffffffff8100f435>] do_trap+0xf5/0x170
 [   68.379168]  [<ffffffff8100f52b>] do_int3+0x7b/0xe0
 [   68.379180]  [<ffffffff812f4a6f>] int3+0x9f/0xd0
 [   68.379203]  <<EOE>>
 [   68.379229]  in libglib-2.0.so.0.1505.0[3d2c800000+dc000]

and tracked it down to:

  commit 03252919b7
  Author: Andi Kleen <ak@suse.de>
  Date:   Wed Jan 30 13:33:18 2008 +0100

      x86: print which shared library/executable faulted in segfault etc. messages

the problem is that we call down_read() from an atomic context.

Solve this by returning from print_vma_addr() if the preempt count is
elevated. Update preempt_conditional_sti / preempt_conditional_cli to
unconditionally lift the preempt count even on !CONFIG_PREEMPT.

Reported-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-14 23:30:19 +01:00
Jonathan Corbet
900cf086fd Be more robust about bad arguments in get_user_pages()
So I spent a while pounding my head against my monitor trying to figure
out the vmsplice() vulnerability - how could a failure to check for
*read* access turn into a root exploit? It turns out that it's a buffer
overflow problem which is made easy by the way get_user_pages() is
coded.

In particular, "len" is a signed int, and it is only checked at the
*end* of a do {} while() loop.  So, if it is passed in as zero, the loop
will execute once and decrement len to -1.  At that point, the loop will
proceed until the next invalid address is found; in the process, it will
likely overflow the pages array passed in to get_user_pages().

I think that, if get_user_pages() has been asked to grab zero pages,
that's what it should do.  Thus this patch; it is, among other things,
enough to block the (already fixed) root exploit and any others which
might be lurking in similar code.  I also think that the number of pages
should be unsigned, but changing the prototype of this function probably
requires some more careful review.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-11 20:44:44 -08:00
Martin Schwidefsky
2f569afd9c CONFIG_HIGHPTE vs. sub-page page tables.
Background: I've implemented 1K/2K page tables for s390.  These sub-page
page tables are required to properly support the s390 virtualization
instruction with KVM.  The SIE instruction requires that the page tables
have 256 page table entries (pte) followed by 256 page status table entries
(pgste).  The pgstes are only required if the process is using the SIE
instruction.  The pgstes are updated by the hardware and by the hypervisor
for a number of reasons, one of them is dirty and reference bit tracking.
To avoid wasting memory the standard pte table allocation should return
1K/2K (31/64 bit) and 2K/4K if the process is using SIE.

Problem: Page size on s390 is 4K, page table size is 1K or 2K.  That means
the s390 version for pte_alloc_one cannot return a pointer to a struct
page.  Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
cannot return a pointer to a pte either, since that would require more than
32 bit for the return value of pte_alloc_one (and the pte * would not be
accessible since its not kmapped).

Solution: The only solution I found to this dilemma is a new typedef: a
pgtable_t.  For s390 pgtable_t will be a (pte *) - to be introduced with a
later patch.  For everybody else it will be a (struct page *).  The
additional problem with the initialization of the ptl lock and the
NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
a destructor pgtable_page_dtor.  The page table allocation and free
functions need to call these two whenever a page table page is allocated or
freed.  pmd_populate will get a pgtable_t instead of a struct page pointer.
 To get the pgtable_t back from a pmd entry that has been installed with
pmd_populate a new function pmd_pgtable is added.  It replaces the pmd_page
call in free_pte_range and apply_to_pte_range.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
Balbir Singh
e1a1cd590e Memory controller: make charging gfp mask aware
Nick Piggin pointed out that swap cache and page cache addition routines
could be called from non GFP_KERNEL contexts.  This patch makes the
charging routine aware of the gfp context.  Charging might fail if the
cgroup is over it's limit, in which case a suitable error is returned.

This patch was tested on a Powerpc box.  I am still looking at being able
to test the path, through which allocations happen in non GFP_KERNEL
contexts.

[kamezawa.hiroyu@jp.fujitsu.com: problem with ZONE_MOVABLE]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:19 -08:00
Balbir Singh
8a9f3ccd24 Memory controller: memory accounting
Add the accounting hooks.  The accounting is carried out for RSS and Page
Cache (unmapped) pages.  There is now a common limit and accounting for both.
The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap()
time.  Page cache is accounted at add_to_page_cache(),
__delete_from_page_cache().  Swap cache is also accounted for.

Each page's page_cgroup is protected with the last bit of the
page_cgroup pointer, this makes handling of race conditions involving
simultaneous mappings of a page easier.  A reference count is kept in the
page_cgroup to deal with cases where a page might be unmapped from the RSS
of all tasks, but still lives in the page cache.

Credits go to Vaidyanathan Srinivasan for helping with reference counting work
of the page cgroup.  Almost all of the page cache accounting code has help
from Vaidyanathan Srinivasan.

[hugh@veritas.com: fix swapoff breakage]
[akpm@linux-foundation.org: fix locking]
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: <Valdis.Kletnieks@vt.edu>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:18 -08:00
Ingo Molnar
32a932332c brk randomization: introduce CONFIG_COMPAT_BRK
based on similar patch from: Pavel Machek <pavel@ucw.cz>

Introduce CONFIG_COMPAT_BRK. If disabled then the kernel is free
(but not obliged to) randomize the brk area.

Heap randomization breaks ancient binaries, so we keep COMPAT_BRK
enabled by default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 22:39:44 +01:00
Nick Piggin
0ed361dec3 mm: fix PageUptodate data race
After running SetPageUptodate, preceeding stores to the page contents to
actually bring it uptodate may not be ordered with the store to set the
page uptodate.

Therefore, another CPU which checks PageUptodate is true, then reads the
page contents can get stale data.

Fix this by having an smp_wmb before SetPageUptodate, and smp_rmb after
PageUptodate.

Many places that test PageUptodate, do so with the page locked, and this
would be enough to ensure memory ordering in those places if
SetPageUptodate were only called while the page is locked.  Unfortunately
that is not always the case for some filesystems, but it could be an idea
for the future.

Also bring the handling of anonymous page uptodateness in line with that of
file backed page management, by marking anon pages as uptodate when they
_are_ uptodate, rather than when our implementation requires that they be
marked as such.  Doing allows us to get rid of the smp_wmb's in the page
copying functions, which were especially added for anonymous pages for an
analogous memory ordering problem.  Both file and anonymous pages are
handled with the same barriers.

FAQ:
Q. Why not do this in flush_dcache_page?
A. Firstly, flush_dcache_page handles only one side (the smb side) of the
ordering protocol; we'd still need smp_rmb somewhere. Secondly, hiding away
memory barriers in a completely unrelated function is nasty; at least in the
PageUptodate macros, they are located together with (half) the operations
involved in the ordering. Thirdly, the smp_wmb is only required when first
bringing the page uptodate, wheras flush_dcache_page should be called each time
it is written to through the kernel mapping. It is logically the wrong place to
put it.

Q. Why does this increase my text size / reduce my performance / etc.
A. Because it is adding the necessary instructions to eliminate the data-race.

Q. Can it be improved?
A. Yes, eg. if you were to create a rule that all SetPageUptodate operations
run under the page lock, we could avoid the smp_rmb places where PageUptodate
is queried under the page lock. Requires audit of all filesystems and at least
some would need reworking. That's great you're interested, I'm eagerly awaiting
your patches.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:19 -08:00
Harvey Harrison
920c7a5d0c mm: remove fastcall from mm/
fastcall is always defined to be empty, remove it

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:18 -08:00
Benjamin Herrenschmidt
5e5419734c add mm argument to pte/pmd/pud/pgd_free
(with Martin Schwidefsky <schwidefsky@de.ibm.com>)

The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as
first argument.  The free functions do not get the mm_struct argument.  This
is 1) asymmetrical and 2) to do mm related page table allocations the mm
argument is needed on the free function as well.

[kamalesh@linux.vnet.ibm.com: i386 fix]
[akpm@linux-foundation.org: coding-syle fixes]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:18 -08:00
Christoph Hellwig
61d5048f14 clean up vmtruncate
vmtruncate is a twisted maze of gotos, this patch cleans it up to have a
proper if else for the two major cases of extending and truncating truncate
and thus makes it a lot more readable while keeping exactly the same
functinality.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:16 -08:00
Hugh Dickins
02098feaa4 swapin needs gfp_mask for loop on tmpfs
Building in a filesystem on a loop device on a tmpfs file can hang when
swapping, the loop thread caught in that infamous throttle_vm_writeout.

In theory this is a long standing problem, which I've either never seen in
practice, or long ago suppressed the recollection, after discounting my load
and my tmpfs size as unrealistically high.  But now, with the new aops, it has
become easy to hang on one machine.

Loop used to grab_cache_page before the old prepare_write to tmpfs, which
seems to have been enough to free up some memory for any swapin needed; but
the new write_begin lets tmpfs find or allocate the page (much nicer, since
grab_cache_page missed tmpfs pages in swapcache).

When allocating a fresh page, tmpfs respects loop's mapping_gfp_mask, which
has __GFP_IO|__GFP_FS stripped off, and throttle_vm_writeout is designed to
break out when __GFP_IO or GFP_FS is unset; but when tmfps swaps in,
read_swap_cache_async allocates with GFP_HIGHUSER_MOVABLE regardless of the
mapping_gfp_mask - hence the hang.

So, pass gfp_mask down the line from shmem_getpage to shmem_swapin to
swapin_readahead to read_swap_cache_async to add_to_swap_cache.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:14 -08:00
Hugh Dickins
46017e9548 swapin_readahead: move and rearrange args
swapin_readahead has never sat well in mm/memory.c: move it to mm/swap_state.c
beside its kindred read_swap_cache_async.  Why were its args in a different
order?  rearrange them.  And since it was always followed by a
read_swap_cache_async of the target page, fold that in and return struct
page*.  Then CONFIG_SWAP=n no longer needs valid_swaphandles and
read_swap_cache_async stubs.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:14 -08:00
Hugh Dickins
c4cc6d07b2 swapin_readahead: excise NUMA bogosity
For three years swapin_readahead has been cluttered with fanciful CONFIG_NUMA
code, advancing addr, and stepping on to the next vma at the boundary, to line
up the mempolicy for each page allocation.

It _might_ be a good idea to allocate swap more according to vma layout; but
the fact is, that's not how we do it at all, 2.6 even less than 2.4: swap is
allocated as needed for pages as they sink to the bottom of the inactive LRUs.
 Sometimes that may match vma layout, but not so often that it's worth going
to these misleading vma->vm_next lengths: rip all that out.

Originally I intended to retain the incrementation of addr, but correct its
initial value: valid_swaphandles generally supplies an offset below the target
addr (this is readaround rather than readahead), but addr has not been
adjusted accordingly, so in the interleave case it has usually been allocating
the target page from the "wrong" node (though that may not matter very much).

But look at the equivalent shmem_swapin code: either by oversight or by
design, though it has all the apparatus for choosing a new mempolicy per page,
it uses the same idx throughout, choosing the same mempolicy and interleave
node for each page of the cluster.

Which is actually a much better strategy: each node has its own LRUs and its
own kswapd, so if you're betting on any particular relationship between swap
and node, the best bet is that nearby swap entries belong to pages from the
same node - even when the mempolicy of the target page is to interleave.  And
examining a map of nodes corresponding to swap entries on a numa=fake system
bears this out.  (We could later tweak swap allocation to make it even more
likely, but this patch is merely about removing cruft.)

So, neither adjust nor increment addr in swapin_readahead, and then
shmem_swapin can use it too; the pseudo-vma to pass policy need only be set up
once per cluster, and so few fields of pvma are used, let's skip the memset -
from shmem_alloc_page also.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:14 -08:00
Christoph Lameter
48667e7a43 Move vmalloc_to_page() to mm/vmalloc.
We already have page table manipulation for vmalloc in vmalloc.c. Move the
vmalloc_to_page() function there as well.

Move the definitions for vmalloc related functions in mm.h to a newly created
section.  A better place would be vmalloc.h but mm.h is basic and may depend
on these functions.  An alternative would be to include vmalloc.h in mm.h
(like done for vmstat.h).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:13 -08:00
Andi Kleen
03252919b7 x86: print which shared library/executable faulted in segfault etc. messages v3
They now look like:

hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]

This makes it easier to pinpoint bugs to specific libraries.

And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.

Relies on earlier patch to shorten the printk formats.

They are often now longer than 80 characters, but I think that's worth it.

[includes fix from Eric Dumazet to check d_path error value]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:18 +01:00
Nick Piggin
95c354fe9f spinlock: lockbreak cleanup
The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.

Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.

Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:20 +01:00
Anton Salikhmetov
8f7b3d156d Update ctime and mtime for memory-mapped files
Update ctime and mtime for memory-mapped files at a write access on
a present, read-only PTE, as well as at a write on a non-present PTE.

Signed-off-by: Anton Salikhmetov <salikhmetov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-23 09:58:55 -08:00
Carsten Otte
9723198c21 #ifdef very expensive debug check in page fault path
This patch puts #ifdef CONFIG_DEBUG_VM around a check in vm_normal_page
that verifies that a pfn is valid.  This patch increases performance of the
page fault microbenchmark in lmbench by 13% and overall dbench performance
by 7% on s390x.  pfn_valid() is an expensive operation on s390 that needs a
high double digit amount of CPU cycles.  Nick Piggin suggested that
pfn_valid() involves an array lookup on systems with sparsemem, and
therefore is an expensive operation there too.

The check looks like a clear debug thing to me, it should never trigger on
regular kernels.  And if a pte is created for an invalid pfn, we'll find
out once the memory gets accessed later on anyway.  Please consider
inclusion of this patch into mm.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-17 15:38:59 -08:00
Balbir Singh
20a1022d4a Swap delay accounting, include lock_page() delays
The delay incurred in lock_page() should also be accounted in swap delay
accounting

Reported-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:44 -08:00
Adam Litke
5b23dbe817 hugetlb: follow_hugetlb_page() for write access
When calling get_user_pages(), a write flag is passed in by the caller to
indicate if write access is required on the faulted-in pages.  Currently,
follow_hugetlb_page() ignores this flag and always faults pages for
read-only access.  This can cause data corruption because a device driver
that calls get_user_pages() with write set will not expect COW faults to
occur on the returned pages.

This patch passes the write flag down to follow_hugetlb_page() and makes
sure hugetlb_fault() is called with the right write_access parameter.

[ezk@cs.sunysb.edu: build fix]
Signed-off-by: Adam Litke <agl@us.ibm.com>
Reviewed-by: Ken Chen <kenchen@google.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Adrian Bunk
02c3530da6 unexport access_process_vm
This patch removes the no longer used EXPORT_SYMBOL_GPL(access_process_vm).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05 21:53:39 +11:00
Simon Arlott
183ff22bb6 spelling fixes: mm/
Spelling fixes in mm/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:27:18 +02:00
Benjamin Herrenschmidt
1c7037db50 remove unused flush_tlb_pgtables
Nobody uses flush_tlb_pgtables anymore, this patch removes all remaining
traces of it from all archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:34 -07:00
KAMEZAWA Hiroyuki
954ffcb35f flush icache before set_pte() on ia64: flush icache at set_pte
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
Dean Nelson
0da7e01f5f calculation of pgoff in do_linear_fault() uses mixed units
The calculation of pgoff in do_linear_fault() should use PAGE_SHIFT and not
PAGE_CACHE_SHIFT since vma->vm_pgoff is in units of PAGE_SIZE and not
PAGE_CACHE_SIZE.  At the moment linux/pagemap.h has PAGE_CACHE_SHIFT
defined as PAGE_SHIFT, but should that ever change this calculation would
break.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Nick Piggin
557ed1fa26 remove ZERO_PAGE
The commit b5810039a5 contains the note

  A last caveat: the ZERO_PAGE is now refcounted and managed with rmap
  (and thus mapcounted and count towards shared rss).  These writes to
  the struct page could cause excessive cacheline bouncing on big
  systems.  There are a number of ways this could be addressed if it is
  an issue.

And indeed this cacheline bouncing has shown up on large SGI systems.
There was a situation where an Altix system was essentially livelocked
tearing down ZERO_PAGE pagetables when an HPC app aborted during startup.
This situation can be avoided in userspace, but it does highlight the
potential scalability problem with refcounting ZERO_PAGE, and corner
cases where it can really hurt (we don't want the system to livelock!).

There are several broad ways to fix this problem:
1. add back some special casing to avoid refcounting ZERO_PAGE
2. per-node or per-cpu ZERO_PAGES
3. remove the ZERO_PAGE completely

I will argue for 3. The others should also fix the problem, but they
result in more complex code than does 3, with little or no real benefit
that I can see.

Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a
false optimisation: if an application is performance critical, it would
not be doing many read faults of new memory, or at least it could be
expected to write to that memory soon afterwards. If cache or memory use
is critical, it should not be working with a significant number of
ZERO_PAGEs anyway (a more compact representation of zeroes should be
used).

As a sanity check -- mesuring on my desktop system, there are never many
mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not
increase much without it.

When running a make -j4 kernel compile on my dual core system, there are
about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000
ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second
is torn down without being COWed). So removing ZERO_PAGE will save 1,000
page faults per second when running kbuild, while keeping it only saves
less than 1 page clearing operation per second. 1 page clear is cheaper
than a thousand faults, presumably, so there isn't an obvious loss.

Neither the logical argument nor these basic tests give a guarantee of no
regressions. However, this is a reasonable opportunity to try to remove
the ZERO_PAGE from the pagefault path. If it is found to cause regressions,
we can reintroduce it and just avoid refcounting it.

The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked.  I don't see
much use to them except on benchmarks.  All other users of ZERO_PAGE are
converted just to use ZERO_PAGE(0) for simplicity. We can look at
replacing them all and maybe ripping out ZERO_PAGE completely when we are
more satisfied with this solution.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Peter Zijlstra
a200ee182a mm: set_page_dirty_balance() vs ->page_mkwrite()
All the current page_mkwrite() implementations also set the page dirty. Which
results in the set_page_dirty_balance() call to _not_ call balance, because the
page is already found dirty.

This allows us to dirty a _lot_ of pages without ever hitting
balance_dirty_pages().  Not good (tm).

Force a balance call if ->page_mkwrite() was successful.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08 12:58:14 -07:00
Hugh Dickins
16abfa0860 Fix sys_remap_file_pages BUG at highmem.c:15!
Gurudas Pai reports kernel BUG at arch/i386/mm/highmem.c:15! below
sys_remap_file_pages, while running Oracle database test on x86 in 6GB
RAM: kunmap thinks we're in_interrupt because the preempt count has
wrapped.

That's because __do_fault expected to unmap page_table, but one of its
two callers do_nonlinear_fault already unmapped it: let do_linear_fault
unmap it first too, and then there's no need to pass the page_table arg
down.

Why have we been so slow to notice this? Probably through forgetting
that the mapping_cap_account_dirty test means that sys_remap_file_pages
nowadays only goes the full nonlinear vma route on a few memory-backed
filesystems like ramfs, tmpfs and hugetlbfs.

[ It also depends on CONFIG_HIGHPTE, so it becomes even harder to
  trigger in practice. Many who have need of large memory have probably
  migrated to x86-64..

  Problem introduced by commit d0217ac04c
  ("mm: fault feedback #1")                -- Linus ]

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: gurudas pai <gurudas.pai@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-04 10:13:09 -07:00
Christoph Hellwig
41f9dc5c87 remove handle_mm_fault export
Now that arch/powerpc/platforms/cell/spufs/fault.c is always built in
the kernel there is no need to export handle_mm_fault anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 17:49:16 -07:00
Rusty Russell
5992b6dac0 lguest: export symbols for lguest as a module
lguest does some fairly lowlevel things to support a host, which
normal modules don't need:

math_state_restore:
	When the guest triggers a Device Not Available fault, we need
	to be able to restore the FPU

__put_task_struct:
	We need to hold a reference to another task for inter-guest
	I/O, and put_task_struct() is an inline function which calls
	__put_task_struct.

access_process_vm:
	We need to access another task for inter-guest I/O.

map_vm_area & __get_vm_area:
	We need to map the switcher shim (ie. monitor) at 0xFFC01000.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
Nick Piggin
79352894b2 mm: fix clear_page_dirty_for_io vs fault race
Fix msync data loss and (less importantly) dirty page accounting
inaccuracies due to the race remaining in clear_page_dirty_for_io().

The deleted comment explains what the race was, and the added comments
explain how it is fixed.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
83c54070ee mm: fault feedback #2
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer.  This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).

[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
d0217ac04c mm: fault feedback #1
Change ->fault prototype.  We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
 FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things.  This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).

This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.

struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.

The page is now returned via a page pointer in the vm_fault struct.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Mark Fasheh
6967614761 ocfs2: release page lock before calling ->page_mkwrite
__do_fault() was calling ->page_mkwrite() with the page lock held, which
violates the locking rules for that callback.  Release and retake the page
lock around the callback to avoid deadlocking file systems which manually
take it.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
54cb8821de mm: merge populate and nopage into fault (fixes nonlinear)
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.

->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping.  The hitch here
is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
 But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).

Having the populate handler install the pte itself is likewise a nasty thing
to be doing.

This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn.  Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.

The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.

After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache.  Seems like a fringe functionality anyway.

NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
users have hit mainline yet.

[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
d00806b183 mm: fix fault vs invalidate race for linear mappings
Fix the race between invalidate_inode_pages and do_no_page.

Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.

The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache.  Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.

The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.

Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).

Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size.  do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size).  The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data.  Valid mappings to the same
place will see a different page.

Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit.  He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight.  However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit.  Scalability is not an issue.

This patch implements this latter approach.  ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so).  do_no_page only unlocks the page after setting up the mapping
completely.  invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).

This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Mel Gorman
769848c038 Add __GFP_MOVABLE for callers to flag allocations from high memory that may be migrated
It is often known at allocation time whether a page may be migrated or not.
This patch adds a flag called __GFP_MOVABLE and a new mask called
GFP_HIGH_MOVABLE.  Allocations using the __GFP_MOVABLE can be either migrated
using the page migration mechanism or reclaimed by syncing with backing
storage and discarding.

An API function very similar to alloc_zeroed_user_highpage() is added for
__GFP_MOVABLE allocations called alloc_zeroed_user_highpage_movable().  The
flags used by alloc_zeroed_user_highpage() are not changed because it would
change the semantics of an existing API.  After this patch is applied there
are no in-kernel users of alloc_zeroed_user_highpage() so it probably should
be marked deprecated if this patch is merged.

Note that this patch includes a minor cleanup to the use of __GFP_ZERO in
shmem.c to keep all flag modifications to inode->mapping in the
shmem_dir_alloc() helper function.  This clean-up suggestion is courtesy of
Hugh Dickens.

Additional credit goes to Christoph Lameter and Linus Torvalds for shaping the
concept.  Credit to Hugh Dickens for catching issues with shmem swap vector
and ramfs allocations.

[akpm@linux-foundation.org: build fix]
[hugh@veritas.com: __GFP_ZERO cleanup]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Jan Beulich
8f0accc862 kill vmalloc_earlyreserve
This symbol got orphaned quite a while ago.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
Ethan Solomita
462e00cc71 oom: stop allocating user memory if TIF_MEMDIE is set
get_user_pages() can try to allocate a nearly unlimited amount of memory on
behalf of a user process, even if that process has been OOM killed.  The
OOM kill occurs upon return to user space via a SIGKILL, but
get_user_pages() will try allocate all its memory before returning.  Change
get_user_pages() to check for TIF_MEMDIE, and if set then return
immediately.

Signed-off-by: Ethan Solomita <solo@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
Rolf Eike Beer
68e116a3b5 MM: use DIV_ROUND_UP() in mm/memory.c
Replace a hand coded version of DIV_ROUND_UP().

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
Benjamin Herrenschmidt
8dab5241d0 Rework ptep_set_access_flags and fix sun4c
Some changes done a while ago to avoid pounding on ptep_set_access_flags and
update_mmu_cache in some race situations break sun4c which requires
update_mmu_cache() to always be called on minor faults.

This patch reworks ptep_set_access_flags() semantics, implementations and
callers so that it's now responsible for returning whether an update is
necessary or not (basically whether the PTE actually changed).  This allow
fixing the sparc implementation to always return 1 on sun4c.

[akpm@linux-foundation.org: fixes, cleanups]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: David Miller <davem@davemloft.net>
Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Acked-by: William Lee Irwin III <wli@holomorphy.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16 13:16:16 -07:00
Nick Piggin
c97a9e10ea mm: more rmap checking
Re-introduce rmap verification patches that Hugh removed when he removed
PG_map_lock. PG_map_lock actually isn't needed to synchronise access to
anonymous pages, because PG_locked and PTL together already do.

These checks were important in discovering and fixing a rare rmap corruption
in SLES9.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:23:06 -07:00