Commit Graph

816 Commits

Author SHA1 Message Date
Linus Torvalds
2a397e82c7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: add SH-S202J to ivb_list[]
  drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warnings
  drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=n
  hpt366: fix build for CONFIG_HOTPLUG=n
  cy82c693: fix build for CONFIG_HOTPLUG=n
2007-10-28 12:03:14 -07:00
Al Viro
4a66fcabd0 ide/arm/icside: fallout from commit 86f3a492bb
struct device doesn't have ->dma; it's in struct expansion_card where
that struct device is embedded into.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-27 22:18:11 -07:00
Bartlomiej Zolnierkiewicz
8588a2b732 ide: add SH-S202J to ivb_list[]
From the report by Nick Warne.

Tested-by: Nick Warne <nick@ukfsn.org>
Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26 20:31:16 +02:00
Jeff Garzik
9d43481364 drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warnings
* We shouldn't bother with dev->current_state, the PCI API functions we
  call manage this for us (and do a far better job at it too).

* Remove pci_set_power_state(dev, PCI_D0) call in resume, as
  pci_enable_device() does the same thing.

* Check pci_enable_device() return value.  If it failed, fail
  the entire resume and avoid programming timings into the [potentially
  dead/asleep] chip.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26 20:31:15 +02:00
Bartlomiej Zolnierkiewicz
d5271be6b5 drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=n
It turns out that const and __{dev}initdata cannot be mixed currently
and that generic IDE PCI host driver is also affected by the same issue:

On Thursday 25 October 2007, Ralf Baechle wrote:
>   CC      drivers/ide/pci/generic.o
> drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a
> +section type conflict

[ Also reported by Martijn Uffing <mp3project@sarijopen.student.utwente.nl>. ]

This patch workarounds the problem in a bit hackish way but without
removing const from generic_chipsets[] (it adds const to __setup() so
__setup_str_ide_generic_all becomes const).

Now all __{dev}initdata data in generic IDE PCI host driver are read-only
so it builds again (driver's .init.data section gets marked as READONLY).

Cc: Martijn Uffing <mp3project@sarijopen.student.utwente.nl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26 20:31:15 +02:00
Bartlomiej Zolnierkiewicz
282037f17f hpt366: fix build for CONFIG_HOTPLUG=n
On Saturday 20 October 2007, Avuton Olrich wrote:

> My randconfig script the attached config caught an error on:
> drivers/ide/pci/cy82c693.c:439: error: primary causes a section type conflict
>
> My git tree: c00046c279
>
> Bisected to:
> 8562043606 is first bad commit
> commit 8562043606
> Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Date:   Sat Oct 20 00:32:34 2007 +0200
>
>     ide: constify struct ide_port_info
>
>     Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It turns out that const and __{dev}initdata cannot be mixed currently
and that hpt366 host driver is also affected by the same issue:

> drivers/ide/pci/hpt366.c:1428: error: hpt366_chipsets causes a section type
> conflict

This patch workarounds the problem by making static struct hpt_info instances
const.  Now all __devinitdata data in hpt366 host driver are read-only so it
builds again (driver's .init.data section gets marked as READONLY).

While at it:

* Bump driver version.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: "Avuton Olrich" <avuton@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26 20:31:15 +02:00
Bartlomiej Zolnierkiewicz
f32d26ae26 cy82c693: fix build for CONFIG_HOTPLUG=n
On Saturday 20 October 2007, Avuton Olrich wrote:

> My randconfig script the attached config caught an error on:
> drivers/ide/pci/cy82c693.c:439: error: primary causes a section type conflict
>
> My git tree: c00046c279
>
> Bisected to:
> 8562043606 is first bad commit
> commit 8562043606
> Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Date:   Sat Oct 20 00:32:34 2007 +0200
>
>     ide: constify struct ide_port_info
>
>     Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It turns out that const and __{dev}initdata cannot be mixed currently.

This patch workarounds the problem by removing __devinitdata tag from 'primary'
variable (which makes 'primary' to be moved from .init.data to .bss section).
Now all __devinitdata data in cy82c693 host driver are read-only so it builds
again (driver's .init.data section gets marked as READONLY).

While at it:

* Move 'primary' variable to its only user, init_iops_cy82c693().

* Bump driver version.

Cc: "Avuton Olrich" <avuton@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26 20:31:15 +02:00
FUJITA Tomonori
dc81785dd6 ide: build fix
git-drivers/ide/ide-probe.c: In function 'hwif_init':
drivers/ide/ide-probe.c:1327: error: implicit declaration of function
'sg_init_table'

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:49:29 +02:00
Jens Axboe
45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Linus Torvalds
c00046c279 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits)
  fix do_sys_open() prototype
  sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake
  Documentation: Fix typo in SubmitChecklist.
  Typo: depricated -> deprecated
  Add missing profile=kvm option to Documentation/kernel-parameters.txt
  fix typo about TBI in e1000 comment
  proc.txt: Add /proc/stat field
  small documentation fixes
  Fix compiler warning in smount example program from sharedsubtree.txt
  docs/sysfs: add missing word to sysfs attribute explanation
  documentation/ext3: grammar fixes
  Documentation/java.txt: typo and grammar fixes
  Documentation/filesystems/vfs.txt: typo fix
  include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros
  trivial copy_data_pages() tidy up
  Fix typo in arch/x86/kernel/tsc_32.c
  file link fix for Pegasus USB net driver help
  remove unused return within void return function
  Typo fixes retrun -> return
  x86 hpet.h: remove broken links
  ...
2007-10-19 20:36:17 -07:00
Robert P. J. Day
276d789e17 ide: remove inclusion of non-existent io_trace.h
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: gadio@netvision.net.il
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:38 +02:00
Bartlomiej Zolnierkiewicz
43e7c0c4bf ide-disk: add get_smart_data() helper
Merge get_smart_values() and get_smart_thresholds()
into get_smart_data() helper.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Bartlomiej Zolnierkiewicz
892470b26c ide: fix ->data_phase in taskfile_load_raw()
It should be TASKFILE_NO_DATA, not TASKFILE_IN.  Luckily ATM ->data_phase is
unused if ->command_type == IDE_DRIVE_TASK_NO_DATA but this may change in the
future.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Bartlomiej Zolnierkiewicz
eda5b359dc ide: check drive->using_dma in flagged_taskfile()
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Bartlomiej Zolnierkiewicz
dd35b7bb86 ide: check ->dma_setup() return value in flagged_taskfile()
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Alan Cox
d3bad45f02 dtc2278: note on docs
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Bartlomiej Zolnierkiewicz
c196567a81 qd65xx: remove pointless qd_{read,write}_reg() (take 2)
These functions are atomic so locking is pointless (noticed by Sergei).

v2:
We can now just use local_irq_save/restore() in qd_testreg() (noticed by Jeff).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Bartlomiej Zolnierkiewicz
a02bfd3ce9 ide: PCI BMDMA initialization fixes (take 2)
* Set hwif->dma_base only if allocation of extra ports succeeds.

While at it:

* Move setting of hwif->dma_{base,master} from ide_{mapped_mmio,iomio}_dma()
  to ide_setup_dma().

* Rename 'dma_base' argument to 'base' in ide_setup_dma() (to make the code
  obey 80-columns limit and increase its readability).

* Remove stale ide_setup_dma() comment.

v2:
* Change to allocate hwif->dmatable_cpu before reserving I/O ports missed
  teardown code (spotted by Sergei).  On the second thought this change is
  actually unnecessary so revert it in v2.

* Make ide_release_dma_engine() void and remove needless comment.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Bartlomiej Zolnierkiewicz
52c8136137 ide: remove stale comments from ide-taskfile.c
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz
8a45513409 ide: remove dead code from ide_driveid_update()
* Remove dead code from ide_driveid_update().

While at it:

* Remove useless comment.

* s/HWIF(drive)/drive->hwif/

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz
bbc615b16d ide: use __ide_end_request() in ide_end_dequeued_request()
* Remove dead code for handling IDE TCQ from ide_end_dequeued_request().

* Add 'dequeue' parameter to __ide_end_request().

* Use __ide_end_request() in ide_end_dequeued_request().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz
bde07e5eab ide: enhance ide_setup_pci_noise()
* Print PCI device Vendor ID, Device ID and revision in
  ide_setup_pci_noise().

* Remove no longer needed PCI device revision printing from
  ide_setup_pci_controller().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz
ae6855c0d5 cs5530: remove needless ide_lock taking
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz
d393aa0326 ide: take ide_lock for prefetch disable/enable in do_special()
Take ide_lock for prefetch disable/enable in do_special(),
then cleanup cmd640 and ht6560b host drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz
69e88d2a75 ht6560b: fix deadlock on error handling
Stop abusing ide_lock lock (switch to a private locking).

Fixes same issue as fixed by Alan Cox in atiixp host driver with
commit 6c5f8cc33e.

ht6560b is a bit special cause we still need to leave ide_lock for
->set_pio_mode with 'pio' argument == 8/9 (prefetch disable/enable).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
5bbcf9242d cmd640: fix deadlock on error handling
Stop abusing ide_lock lock (switch to a private locking).

Fixes same issue as fixed by Alan Cox in atiixp host driver with
commit 6c5f8cc33e.

cmd640 is a bit special cause we still need to leave ide_lock for
->set_pio_mode with 'pio' argument == 8/9 (prefetch disable/enable).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
a482958bf6 slc90e66: fix deadlock on error handling
* Stop abusing ide_lock lock (switch to a private locking).

  Fixes same issue as fixed by Alan Cox in atiixp host driver with
  commit 6c5f8cc33e.

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
e65dde715c opti621: fix deadlock on error handling
* Stop abusing ide_lock lock (switch to a private locking).

  Fixes same issue as fixed by Alan Cox in atiixp host driver with
  commit 6c5f8cc33e.

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
f949820de3 qd65xx: fix deadlock on error handling
Stop abusing ide_lock lock (switch to a private locking).

Fixes same issue as fixed by Alan Cox in atiixp host driver with
commit 6c5f8cc33e.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
a34a8751f3 dtc2278: fix deadlock on error handling
Stop abusing ide_lock lock (switch to a private locking).

Fixes same issue as fixed by Alan Cox in atiixp host driver with
commit 6c5f8cc33e.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
2047e15be4 ali14xx: fix deadlock on error handling
Stop abusing ide_lock lock by switching to a private locking.

Fixes same issue as fixed by Alan Cox in atiixp host driver with
commit 6c5f8cc33e.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:35 +02:00
Bartlomiej Zolnierkiewicz
8562043606 ide: constify struct ide_port_info
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:34 +02:00
Bartlomiej Zolnierkiewicz
039788e153 ide: replace ide_pci_device_t by struct ide_port_info
* Rename struct ide_pci_device_s to struct ide_port_info.

* Remove ide_pci_device_t typedef.

While at it:

* Fix __ide_pci_register_driver() comment.

* Fix aec62xx_init_one() comment.

* Remove unused 'cds' field from ide_hwgroup_t.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:34 +02:00
Bartlomiej Zolnierkiewicz
6157332eda via82cxxx: keep local ide_pci_device_t copy
* Keep local ide_pci_device_t copy in via_init_one().

* Adjust ide_pci_device_t copy according to id->driver_data in via_init_one()
  and remove no longer needed second via82cxxx_chipsets[] entry.

* via82cxxx_chipsets[] -> via82cxxx_chipset.

* Remove IDE_HFLAGS_VIA define.

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:33 +02:00
Bartlomiej Zolnierkiewicz
691da768a3 dtc2278: set ->pio_mask also for the second port
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:33 +02:00
Bartlomiej Zolnierkiewicz
a05e2faa0e au1xxx-ide: set ->autotune and ->no_io_32bit also for the slave device
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:33 +02:00
Bartlomiej Zolnierkiewicz
9239b33393 ide: remove write-only hwif->hw
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:33 +02:00
Bartlomiej Zolnierkiewicz
18e181fe13 ide: add hwif->ack_intr hook
* Add hwif->ack_intr hook and use it instead of hwif->hw.ack_intr.

* Add missing brackets to cris-v32 and powerpc ide_ack_intr() macros.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Bartlomiej Zolnierkiewicz
86f3a492bb icside: use ec->dma directly
* hwif->hwif_data contains pointer to struct expansion_card so use ec->dma
  directly instead of caching it in hwif->hw.dma.

* Remove no longer needed hw_regs_t.dma and NO_DMA define.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Bartlomiej Zolnierkiewicz
8f173b5bf4 ide: fix ide_register_hw() to check hwif->io_ports[]
hwif->hw.io_ports[] and hwif->io_ports[] should be the same but "4drives"
support and scc_pata host driver set only hwif->io_ports[].

To compensate for this check hwif->io_ports[] instead of hwif->hw.io_ports[]
in ide_register_hw() (instead of fixing "4drives" and scc_pata because hwif->hw
is to be removed).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Bartlomiej Zolnierkiewicz
847ddd2bbe ide: add CONFIG_IDE_ARCH_OBSOLETE_INIT
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead
of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Bartlomiej Zolnierkiewicz
baa8f3e94b ide: add ide_find_port() helper
* Add ide_find_port() helper.

* Convert icside, rapide and ide_platform host drivers to use it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz
8447d9d52a ide: add ide_device_add()
* Add ide_device_add() helper and convert host drivers to use it
  instead of open-coded variants.

* Make ide_pci_setup_ports() and do_ide_setup_pci_device()
  take 'u8 *idx' argument instead of 'ata_index_t *index'.

* Remove no longer needed ata_index_t.

* Unexport probe_hwif_init() and make it static.

* Unexport ide_proc_register_port().

There should be no functionality changes caused by this patch
(sgiioc4.c: ide_proc_register_port() requires hwif->present
 to be set and it won't be set if probe_hwif_init() fails).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz
fd9bb53942 ide: add ->fixup method to ide_hwif_t
* Add ->fixup method to ide_hwif_t.

* Set hwif->fixup in ide_pci_setup_ports() to d->fixup.

* Use hwif->fixup in probe_hwif().

* Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in
  ide_setup_pci_device().

* Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup,
  update all ide_register_hw() users accordingly.

* Convert ide-cs/delkin_cb host drivers to use ide_register_hw().

* Restore hwif->fixup in ide_hwif_restore().

* Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup()
  and 'fixup' argument from probe_hwif().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz
438c470261 siimage: separate PATA and SATA methods
* Split off sil_sata_udma_filter() from sil_udma_filter()
  and rename sil_udma_filter() to sil_pata_udma_filter().

* Rename siimage_busproc() to sil_sata_busproc().

* Rename siimage_reset_poll() to sil_sata_reset_poll()
  and in init_hwif_siimage() set ->reset_poll method only
  for SATA controllers.

* Rename siimage_pre_reset() to sil_sata_pre_reset(),
  in init_hwif_siimage() set ->pre_reset method only for
  SATA controllers and remove redundant is_sata() call.

* Add CONFIG_BLK_DEV_IDE_SATA #ifdef/#endif to pdev_is_sata()
  so compiler will know to throw out unused SATA code for
  CONFIG_BLK_DEV_IDE_SATA=n case (830 bytes saved on x86-32).

* Bump driver version.

Some minor cleanups while at it:

* Convert sil_{pata,sata}_udma_filter() to use ATA_UDMA* defines.

* In siimage_mmio_ide_dma_test_irq() move 'base' variable
  under 'if (SATA_ERROR_REG)' block.

* Simplify sil_sata_reset_poll() a bit.

* Cache is_sata() result in init_hwif_siimage() 

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz
b1e0386543 aec62xx: remove aec62xx_dma_lost_irq()
* Remove aec62xx_dma_lost_irq() (generic ide_dma_lost_irq() will be used now).

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz
283283070f alim15x3: use ->host_flags and ->udma_mask fields from ide_pci_device_t
* Make a local copy of ali15x3_chipset in alim15x3_init_one() and set
  ->host_flags / ->udma_mask according to the controller capabilities.

* Cleanup init_hwif_common_ali15x3().

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz
cad221aa82 alim15x3: fix CD_ROM DMA and PIO FIFO settings setup
* Setup CD_ROM DMA and PIO FIFO settings in init_chipset_ali15x3() instead
  of ata66_ali15x3().  The latter is called from init_hwif_common_ali15x3()
  only if DMA base exists (which insists m5529_revision > 0x20).

  This changes makes CD_ROM DMA / PIO FIFO bits being set only once
  and also when "idex=ata66" kernel parameter is used.

* While at it move also chip_is_1543c_e setup from ata66_ali15x3() to
  init_chipset_ali15x3() and check if isa_dev exists before accessing it.

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz
caea7602f3 ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flags
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports()
to set drive->{io_32bit,unmask} for both drives on the interface.  Convert
amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags.

While at it:

* Add IDE_HFLAGS_AMD define (amd74xx host driver).

* Add IDE_HFLAGS_VIA define (via82cxxx host driver).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz
272a370900 ide: add IDE_HFLAG_RQSIZE_256 host flag
Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set
hwif->rqsize to 256 sectors.  Convert pdc202xx_old host driver to use it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00