Commit Graph

211663 Commits

Author SHA1 Message Date
Wei Yongjun
ba7ff2b76d KVM: x86 emulator: mask group 8 instruction as BitOp
Mask group 8 instruction as BitOp, so we can share the
code for adjust the source operand.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:03 +02:00
Wei Yongjun
3885f18fe3 KVM: x86 emulator: do not adjust the address for immediate source
adjust the dst address for a register source but not adjust the
address for an immediate source.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:02 +02:00
Wei Yongjun
35c843c485 KVM: x86 emulator: fix negative bit offset BitOp instruction emulation
If bit offset operands is a negative number, BitOp instruction
will return wrong value. This patch fix it.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:01 +02:00
Mohammed Gamal
8744aa9aad KVM: x86 emulator: Add stc instruction (opcode 0xf9)
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:01 +02:00
Wei Yongjun
c034da8b92 KVM: x86 emulator: using SrcOne for instruction d0/d1 decoding
Using SrcOne for instruction d0/d1 decoding.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:00 +02:00
Wei Yongjun
36089fed70 KVM: x86 emulator: disable writeback when decode dest operand
This patch change to disable writeback when decode dest
operand if the dest type is ImplicitOps or not specified.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:00 +02:00
Wei Yongjun
06cb704611 KVM: x86 emulator: use SrcAcc to simplify stos decoding
Use SrcAcc to simplify stos decoding.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:00 +02:00
Mohammed Gamal
6e154e56b4 KVM: x86 emulator: Add into, int, and int3 instructions (opcodes 0xcc-0xce)
This adds support for int instructions to the emulator.

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:00 +02:00
Mohammed Gamal
160ce1f1a8 KVM: x86 emulator: Allow accessing IDT via emulator ops
The patch adds a new member get_idt() to x86_emulate_ops.
It also adds a function to get the idt in order to be used by the emulator.

This is needed for real mode interrupt injection and the emulation of int
instructions.

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:59 +02:00
Wei Yongjun
d3ad624329 KVM: x86 emulator: simplify two-byte opcode check
Two-byte opcode always start with 0x0F and the decode flags
of opcode 0xF0 is always 0, so remove dup check.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:59 +02:00
Alexander Graf
a58ddea556 KVM: PPC: Move KVM trampolines before __end_interrupts
When using a relocatable kernel we need to make sure that the trampline code
and the interrupt handlers are both copied to low memory. The only way to do
this reliably is to put them in the copied section.

This patch should make relocated kernels work with KVM.

KVM-Stable-Tag
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:59 +02:00
Alexander Graf
2b05d71fef KVM: PPC: Make long relocations be ulong
On Book3S KVM we directly expose some asm pointers to C code as
variables. These need to be relocated and thus break on relocatable
kernels.

To make sure we can at least build, let's mark them as long instead
of u32 where 64bit relocations don't work.

This fixes the following build error:

WARNING: 2 bad relocations^M
> c000000000008590 R_PPC64_ADDR32    .text+0x4000000000008460^M
> c000000000008594 R_PPC64_ADDR32    .text+0x4000000000008598^M

Please keep in mind that actually using KVM on a relocated kernel
might still break. This only fixes the compile problem.

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:59 +02:00
Alexander Graf
0e67790387 KVM: PPC: Use MSR_DR for external load_up
Book3S_32 requires MSR_DR to be disabled during load_up_xxx while on Book3S_64
it's supposed to be enabled. I misread the code and disabled it in both cases,
potentially breaking the PS3 which has a really small RMA.

This patch makes KVM work on the PS3 again.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:59 +02:00
Alexander Graf
2d27fc5eac KVM: PPC: Add book3s_32 tlbie flush acceleration
On Book3s_32 the tlbie instruction flushed effective addresses by the mask
0x0ffff000. This is pretty hard to reflect with a hash that hashes ~0xfff, so
to speed up that target we should also keep a special hash around for it.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:58 +02:00
Gleb Natapov
49451389ec KVM: PPC: correctly check gfn_to_pfn() return value
On failure gfn_to_pfn returns bad_page so use correct function to check
for that.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:58 +02:00
Alexander Graf
2e0908afaf KVM: PPC: RCU'ify the Book3s MMU
So far we've been running all code without locking of any sort. This wasn't
really an issue because I didn't see any parallel access to the shadow MMU
code coming.

But then I started to implement dirty bitmapping to MOL which has the video
code in its own thread, so suddenly we had the dirty bitmap code run in
parallel to the shadow mmu code. And with that came trouble.

So I went ahead and made the MMU modifying functions as parallelizable as
I could think of. I hope I didn't screw up too much RCU logic :-). If you
know your way around RCU and locking and what needs to be done when, please
take a look at this patch.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:58 +02:00
Alexander Graf
5302104235 KVM: PPC: Book3S_32 MMU debug compile fixes
Due to previous changes, the Book3S_32 guest MMU code didn't compile properly
when enabling debugging.

This patch repairs the broken code paths, making it possible to define DEBUG_MMU
and friends again.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:58 +02:00
Alexander Graf
15711e9c92 KVM: PPC: Add get_pvinfo interface to query hypercall instructions
We need to tell the guest the opcodes that make up a hypercall through
interfaces that are controlled by userspace. So we need to add a call
for userspace to allow it to query those opcodes so it can pass them
on.

This is required because the hypercall opcodes can change based on
the hypervisor conditions. If we're running in hardware accelerated
hypervisor mode, a hypercall looks different from when we're running
without hardware acceleration.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:57 +02:00
Alexander Graf
d7d3c2ea99 KVM: PPC: Add Documentation about PV interface
We just introduced a new PV interface that screams for documentation. So here
it is - a shiny new and awesome text file describing the internal works of
the PPC KVM paravirtual interface.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:57 +02:00
Alexander Graf
644bfa013f KVM: PPC: PV wrteei
On BookE the preferred way to write the EE bit is the wrteei instruction. It
already encodes the EE bit in the instruction.

So in order to get BookE some speedups as well, let's also PV'nize thati
instruction.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:57 +02:00
Alexander Graf
7810927760 KVM: PPC: PV mtmsrd L=0 and mtmsr
There is also a form of mtmsr where all bits need to be addressed. While the
PPC64 Linux kernel behaves resonably well here, on PPC32 we do not have an
L=1 form. It does mtmsr even for simple things like only changing EE.

So we need to hook into that one as well and check for a mask of bits that we
deem safe to change from within guest context.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:56 +02:00
Alexander Graf
819a63dc79 KVM: PPC: PV mtmsrd L=1
The PowerPC ISA has a special instruction for mtmsr that only changes the EE
and RI bits, namely the L=1 form.

Since that one is reasonably often occuring and simple to implement, let's
go with this first. Writing EE=0 is always just a store. Doing EE=1 also
requires us to check for pending interrupts and if necessary exit back to the
hypervisor.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:56 +02:00
Alexander Graf
92234722ed KVM: PPC: PV assembler helpers
When we hook an instruction we need to make sure we don't clobber any of
the registers at that point. So we write them out to scratch space in the
magic page. To make sure we don't fall into a race with another piece of
hooked code, we need to disable interrupts.

To make the later patches and code in general easier readable, let's introduce
a set of defines that save and restore r30, r31 and cr. Let's also define some
helpers to read the lower 32 bits of a 64 bit field on 32 bit systems.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:55 +02:00
Alexander Graf
71ee8e34fe KVM: PPC: Introduce branch patching helper
We will need to patch several instruction streams over to a different
code path, so we need a way to patch a single instruction with a branch
somewhere else.

This patch adds a helper to facilitate this patching.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:54 +02:00
Alexander Graf
2d4f567103 KVM: PPC: Introduce kvm_tmp framework
We will soon require more sophisticated methods to replace single instructions
with multiple instructions. We do that by branching to a memory region where we
write replacement code for the instruction to.

This region needs to be within 32 MB of the patched instruction though, because
that's the furthest we can jump with immediate branches.

So we keep 1MB of free space around in bss. After we're done initing we can just
tell the mm system that the unused pages are free, but until then we have enough
space to fit all our code in.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:54 +02:00
Alexander Graf
d1290b15e7 KVM: PPC: PV tlbsync to nop
With our current MMU scheme we don't need to know about the tlbsync instruction.
So we can just nop it out.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:53 +02:00
Alexander Graf
d1293c9275 KVM: PPC: PV instructions to loads and stores
Some instructions can simply be replaced by load and store instructions to
or from the magic page.

This patch replaces often called instructions that fall into the above category.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:52 +02:00
Alexander Graf
73a1810982 KVM: PPC: KVM PV guest stubs
We will soon start and replace instructions from the text section with
other, paravirtualized versions. To ease the readability of those patches
I split out the generic looping and magic page mapping code out.

This patch still only contains stubs. But at least it loops through the
text section :).

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:51 +02:00
Alexander Graf
d17051cb8d KVM: PPC: Generic KVM PV guest support
We have all the hypervisor pieces in place now, but the guest parts are still
missing.

This patch implements basic awareness of KVM when running Linux as guest. It
doesn't do anything with it yet though.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:50 +02:00
Alexander Graf
ba49296236 KVM: Move kvm_guest_init out of generic code
Currently x86 is the only architecture that uses kvm_guest_init(). With
PowerPC we're getting a second user, but the signature is different there
and we don't need to export it, as it uses the normal kernel init framework.

So let's move the x86 specific definition of that function over to the x86
specfic header file.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:49 +02:00
Alexander Graf
5fc87407b5 KVM: PPC: Expose magic page support to guest
Now that we have the shared page in place and the MMU code knows about
the magic page, we can expose that capability to the guest!

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:49 +02:00
Alexander Graf
e8508940a8 KVM: PPC: Magic Page Book3s support
We need to override EA as well as PA lookups for the magic page. When the guest
tells us to project it, the magic page overrides any guest mappings.

In order to reflect that, we need to hook into all the MMU layers of KVM to
force map the magic page if necessary.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:48 +02:00
Alexander Graf
beb03f14da KVM: PPC: First magic page steps
We will be introducing a method to project the shared page in guest context.
As soon as we're talking about this coupling, the shared page is colled magic
page.

This patch introduces simple defines, so the follow-up patches are easier to
read.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:46 +02:00
Alexander Graf
28e83b4fa7 KVM: PPC: Make PAM a define
On PowerPC it's very normal to not support all of the physical RAM in real mode.
To check if we're matching on the shared page or not, we need to know the limits
so we can restrain ourselves to that range.

So let's make it a define instead of open-coding it. And while at it, let's also
increase it.

Signed-off-by: Alexander Graf <agraf@suse.de>

v2 -> v3:

  - RMO -> PAM (non-magic page)
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:46 +02:00
Alexander Graf
90bba35887 KVM: PPC: Tell guest about pending interrupts
When the guest turns on interrupts again, it needs to know if we have an
interrupt pending for it. Because if so, it should rather get out of guest
context and get the interrupt.

So we introduce a new field in the shared page that we use to tell the guest
that there's a pending interrupt lying around.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:46 +02:00
Alexander Graf
fad93fe1d4 KVM: PPC: Add PV guest scratch registers
While running in hooked code we need to store register contents out because
we must not clobber any registers.

So let's add some fields to the shared page we can just happily write to.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:46 +02:00
Alexander Graf
5c6cedf488 KVM: PPC: Add PV guest critical sections
When running in hooked code we need a way to disable interrupts without
clobbering any interrupts or exiting out to the hypervisor.

To achieve this, we have an additional critical field in the shared page. If
that field is equal to the r1 register of the guest, it tells the hypervisor
that we're in such a critical section and thus may not receive any interrupts.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:46 +02:00
Alexander Graf
2a342ed577 KVM: PPC: Implement hypervisor interface
To communicate with KVM directly we need to plumb some sort of interface
between the guest and KVM. Usually those interfaces use hypercalls.

This hypercall implementation is described in the last patch of the series
in a special documentation file. Please read that for further information.

This patch implements stubs to handle KVM PPC hypercalls on the host and
guest side alike.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:45 +02:00
Alexander Graf
a73a9599e0 KVM: PPC: Convert SPRG[0-4] to shared page
When in kernel mode there are 4 additional registers available that are
simple data storage. Instead of exiting to the hypervisor to read and
write those, we can just share them with the guest using the page.

This patch converts all users of the current field to the shared page.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:45 +02:00
Alexander Graf
de7906c36c KVM: PPC: Convert SRR0 and SRR1 to shared page
The SRR0 and SRR1 registers contain cached values of the PC and MSR
respectively. They get written to by the hypervisor when an interrupt
occurs or directly by the kernel. They are also used to tell the rfi(d)
instruction where to jump to.

Because it only gets touched on defined events that, it's very simple to
share with the guest. Hypervisor and guest both have full r/w access.

This patch converts all users of the current field to the shared page.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:45 +02:00
Alexander Graf
5e030186df KVM: PPC: Convert DAR to shared page.
The DAR register contains the address a data page fault occured at. This
register behaves pretty much like a simple data storage register that gets
written to on data faults. There is no hypervisor interaction required on
read or write.

This patch converts all users of the current field to the shared page.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:45 +02:00
Alexander Graf
d562de48de KVM: PPC: Convert DSISR to shared page
The DSISR register contains information about a data page fault. It is fully
read/write from inside the guest context and we don't need to worry about
interacting based on writes of this register.

This patch converts all users of the current field to the shared page.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:44 +02:00
Alexander Graf
666e7252a1 KVM: PPC: Convert MSR to shared page
One of the most obvious registers to share with the guest directly is the
MSR. The MSR contains the "interrupts enabled" flag which the guest has to
toggle in critical sections.

So in order to bring the overhead of interrupt en- and disabling down, let's
put msr into the shared page. Keep in mind that even though you can fully read
its contents, writing to it doesn't always update all state. There are a few
safe fields that don't require hypervisor interaction. See the documentation
for a list of MSR bits that are safe to be set from inside the guest.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:43 +02:00
Alexander Graf
96bc451a15 KVM: PPC: Introduce shared page
For transparent variable sharing between the hypervisor and guest, I introduce
a shared page. This shared page will contain all the registers the guest can
read and write safely without exiting guest context.

This patch only implements the stubs required for the basic structure of the
shared page. The actual register moving follows.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:42 +02:00
Mohammed Gamal
34698d8c61 KVM: x86 emulator: Fix nop emulation
If a nop instruction is encountered, we jump directly to the done label.
This skip updating rip. Break from the switch case instead

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:41 +02:00
Avi Kivity
2dbd0dd711 KVM: x86 emulator: Decode memory operands directly into a 'struct operand'
Since modrm operand can be either register or memory, decoding it into
a 'struct operand', which can represent both, is simpler.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:40 +02:00
Avi Kivity
1f6f05800e KVM: x86 emulator: change invlpg emulation to use src.mem.addr
Instead of using modrm_ea, which will soon be gone.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:39 +02:00
Avi Kivity
342fc63095 KVM: x86 emulator: switch LEA to use SrcMem decoding
The NoAccess flag will prevent memory from being accessed.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:38 +02:00
Avi Kivity
5a506b125f KVM: x86 emulator: add NoAccess flag for memory instructions that skip access
Use for INVLPG, which accesses the tlb, not memory.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:37 +02:00
Avi Kivity
b27f38563d KVM: x86 emulator: use struct operand for mov reg,dr and mov dr,reg for reg op
This is an ordinary modrm source or destination; use the standard structure
representing it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:36 +02:00