Commit Graph

13398 Commits

Author SHA1 Message Date
Linus Torvalds
ba609a9d97 Remove some unused variables
When Andi reverted the HPET resource reservation (in commit
0f8dc2f065), he didn't remove the now
unused variables, which just causes gcc to be noisy.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-03 18:27:53 -07:00
Andi Kleen
5dcccd8d7e Revert perfctr reservation to 2.6.21 state
With this change it works again when the nmi watchdog is disabled.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Björn Steinbrink <B.Steinbrink@gmx.de>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-03 18:11:35 -07:00
Andi Kleen
0f8dc2f065 Revert HPET resource reservation
Matthias Lenk reports that the PCI subsystem would move the HPET on
SB400/SB600-based systems, where the HPET is in BAR1 of the SMbus
controller.

The reason? The ACPI layer registered the PCI MMIO range as being busy
too early, before PCI enumeration had happened, causing the PCI layer to
decide that it should relocate the resources somewhere else.

Firmware resources should be marked busy _after_ the PCI enumeration and
probing has happened, not before.

Remove the too-early reservation, we'll fix it up to do it properly
later.  In the meantime, this solves the regression.

Tested-by: Matthias Lenk <matthias.lenk@amd.com>
Cc: Aaron Durbin <adurbin@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-03 18:09:46 -07:00
Mike Frysinger
4a3207a333 Blackfin arch: update board defconfig files
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-02 13:49:15 +08:00
Robin Getz
da1f95b4c4 Blackfin arch: Fix up remaining printks with proper log levels
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-25 18:05:53 +08:00
Jie Zhang
de3025f4e2 Blackfin arch: Add proper -mcpu option according to the cpu and silicon revision configuration
Add silicon revision "any" and "none". Add proper -mcpu option according
to the cpu and silicon revision configuration.

Need update to use latest Blackfin cross compile toolchain.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-25 18:04:12 +08:00
Rafael J. Wysocki
2391dae3e3 PM: introduce set_target method in pm_ops
Commit 52ade9b3b9 changed the suspend code
ordering to execute pm_ops->prepare() after the device model per-device
.suspend() calls in order to fix some ACPI-related issues.  Unfortunately, it
broke the at91 platform which assumed that pm_ops->prepare() would be called
before suspending devices.

at91 used pm_ops->prepare() to get notified of the target system sleep state,
so that it could use this information while suspending devices.  However, with
the current suspend code ordering pm_ops->prepare() is called too late for
this purpose.  Thus, at91 needs an additional method in 'struct pm_ops' that
will be used for notifying the platform of the target system sleep state.
Moreover, in the future such a method will also be needed by ACPI.

This patch adds the .set_target() method to 'struct pm_ops' and makes the
suspend code call it, if implemented, before executing the device model
per-device .suspend() calls.  It also modifies the at91 code to use
pm_ops->set_target() instead of pm_ops->prepare().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Andrew Morton
84288ad89e i386: mtrr crash fix
Commit 3ebad59056 ("[PATCH] x86: Save and
restore the fixed-range MTRRs of the BSP when suspending") added mtrr
operations without verifying that the CPU has MTRRs.  Crashes transmeta
CPUs.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux@horizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Linus Torvalds
4710bcce8e i386: remove bogus mtrr range check
Commit 9215da3320 "fixed" the MTRR range
check to not allow any MTRR's under the 1MB mark (since that's where the
fixed MTRR's are active).

However, that was totally bogus, since it's normal (and almost required)
to have a large variable MTRR that starts at 0, and covers some large
percentage of the whole RAM, and then using the fixed MTRR's to override
that large MTRR to handle the special ISA hole in the 640k-1M region.

The old check was bogus too (checking that no variable MTRR is used that
is entirely under the 1MB range), but at least it wasn't actively
detrimental, because no sane situation would ever trigger such MTRR
usage in the first place.

That said, the whole notion of not allowing variable MTRR's in the low
1MB is just stupid, so rather than revert the commit, this just removes
the whole sad and unnecessary check entirely.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Luca Palermo <darkmage@sabayonlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 10:56:11 -07:00
Linus Torvalds
abdba71725 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Add linux/pagemap.h to asm/tlb.h
  [SPARC64]: Need to set state to IDLE during sun4v IRQ enable.
  [SPARC64]: Fix VIRQ enabling.
  [SPARC64]: Add irqs to mdesc_node.
2007-06-29 21:30:18 -07:00
Will Schmidt
fde937d826 Fix VDSO gettimeofday() when called with NULL struct timeval.
The vdso64 portion of patch 74609f4536 for
fixing problems with NULL gettimeofday input mistakenly checks for a
null tz field twice, when it should be checking for null tz once, and
null tv once; by way of a r10/r11 typo.

Any application calling gettimeofday(&tv,NULL) will "fail".

This corrects that typo, and makes my G5 happy.

Tested on G5.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Forwarded-by: Ben Herrenschmidt <benh@kernel.crashing.org>

[ Ben says: "I checked the 32 bits part of the change is correct.  You
  can probably blame me for originally writing the 2 versions with
  inversed usage of r10 and r11, thus confusing Tony :-)"

  Ben duly blamed.   - Linus ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-29 21:27:00 -07:00
David Woodhouse
edd5cd4a94 Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM
Not all the world is an i386.  Many architectures need 64-bit arguments to be
aligned in suitable pairs of registers, and the original
sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an
argument register for padding after the first integer.  Since we don't
normally have more than 6 arguments for system calls, that left no room for
the final argument on some architectures.

Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which
all fits nicely.  In fact, ARM already had that, but called it
sys_arm_sync_file_range.  Move it to fs/sync.c and rename it, then implement
the needed compatibility routine.  And stop the missing syscall check from
bitching about the absence of sys_sync_file_range() if we've implemented
sys_sync_file_range2() instead.

Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:30 -07:00
Alexey Dobriyan
5da44ad504 mips-jazz: correct flags for timer io resource
arch/mips/jazz/setup.c:55:4: error: Initializer entry defined twice

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:19 -07:00
Randy Dunlap
80581c43d0 mtrr/cyrix: fix sections
main.c::mtrr_add() or mtrr_del() [exported]
calls main.c::mtrr_add_page() or mtrr_del_page() or mtrr_restore() [resume]
calls main.c::set_mtrr()
calls main.c::ipi_handler()
calls main.c::mtrr_if->set_all() == which can be cyrix_set_all

WARNING: arch/i386/kernel/built-in.o(.text+0x8657): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x866b): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x867e): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x8684): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x868a): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:34:53 -07:00
Linus Torvalds
b75ae86035 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Make SN2 PCI code use ioremap rather than manually mangle the address
  [IA64] Force error to surface in nofault code
  [IA64] change sh_change_coherence oemcall to use nolock
  [IA64] remove duplicate header include line
  [IA64] Correct unwind validation code
  [IA64] is_power_of_2-ia64/mm/hugetlbpage.c
2007-06-27 10:04:02 -07:00
Siddha, Suresh B
48d8d7ee5d x86_64 irq: use mask/unmask and proper locking in fixup_irqs()
Force irq migration path during cpu offline, is not using proper locks and
irq_chip mask/unmask routines.  This will result in some races(especially
the device generating the interrupt can see some inconsistent state,
resulting in issues like stuck irq,..).

Appended patch fixes the issue by taking proper lock and encapsulating
irq_chip set_affinity() with a mask() before and an unmask() after.

This fixes a MSI irq stuck issue reported by Darrick Wong.

There are several more general bugs in this area(irq migration in the
process context). For example,

 1. Possibility of missing edge triggered irq.
 2. Reliable method of migrating level triggered irq in the process context.

We plan to look and close these in the near future.

Eric says:
	In addition even with the fix from Suresh there is still at least one
	nasty hardware race in fixup_irqs().   However we exercise that code
	path rarely enough that we are unlikely to hit it in the real world,
	and that race seems to have existed since the code was merged.  And a
	fix for that is not coming soon as it is an open investigation area
	if we can fix irq migration to work outside of irq context or if
	we have to rework the requirements imposed by the generic cpu hotplug
	and layer on fixup_irqs().  So this may come up again.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-and-tested-by: Darrick Wong <djwong@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-26 16:54:29 -07:00
Suresh Siddha
c47e285dee x86_64: set the irq_chip name for lapic
set the irq_chip name for lapic.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-26 16:54:29 -07:00
Linus Torvalds
f436ab4361 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4449/1: more entries in arch/arm/boot/.gitignore
  [ARM] 4452/1: Force the literal pool dump before reloc_end
  [ARM] Update show_regs/oops register format
  [ARM] Add support for pause_on_oops and display preempt/smp options
2007-06-26 16:51:23 -07:00
Linus Torvalds
6cd236e005 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Count timer interrupts correctly.
  [MIPS] SMTC and non-SMTC kernel and modules are incompatible
  [MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.
  [MIPS] Remove a duplicated local variable in test_and_clear_bit()
  [MIPS] use compat_siginfo in rt_sigframe_n32
  [MIPS] 20K: Handle WAIT related bugs according to errata information
  [MIPS] AP/SP requires shadow registers, auto enable support.
  [MIPS] Fix pb1500 reg B access
  [MIPS] Alchemy: Fix wrong cast
  [MIPS] remove "support for" from system type entry
  [MIPS] add io_map_base to pci_controller on Cobalt
  [MIPS] __ucmpdi2 arguments are unsigned long long.
2007-06-26 16:50:48 -07:00
Jes Sorensen
1ee27a4eed [IA64] Make SN2 PCI code use ioremap rather than manually mangle the address
This one changes the SN2 specific PCI drivers to use ioremap() for
obtaining the real address to access for the PCI registers instead of
manually calculating them with __IA64_UNCACHED_OFFSET.

The patch should have no real change when running on a normal Linux
kernel, but when running as a paravirtualized it is needed.

Signed-off-by: Jes Sorenson <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26 13:35:45 -07:00
Russ Anderson
c034637967 [IA64] Force error to surface in nofault code
Montecito behaves slightly differently than previous processors,
resulting in the MCA due to a failed PIO read to sometimes surfacing
outside the nofault code.  Adding an additional or and stop bits
ensures the MCA surfaces in the nofault code.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26 13:34:16 -07:00
MUNEDA Takahiro
2e77ff21d2 [IA64] remove duplicate header include line
Remove duplicate header include line from arch/ia64/kernel/time.c.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26 13:33:45 -07:00
Keith Owens
66fa9b107e [IA64] Correct unwind validation code
Both rp_loc and pfs_loc can be in the register stack area _or_ they can
be in the memory stack area, the latter occurs when a struct pt_regs is
pushed.  Correct the validation check on these fields to check for both
stack areas.  Not allowing for memory stack locations means no
backtrace past ia64_leave_kernel, or any other code that uses
PT_REGS_UNWIND_INFO.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26 13:33:10 -07:00
vignesh babu
9be26f4c4b [IA64] is_power_of_2-ia64/mm/hugetlbpage.c
Replacing (n & (n-1)) in the context of power of 2 checks
with is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26 13:32:59 -07:00
Chris Dearman
8e15a0e35f [MIPS] Count timer interrupts correctly.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:34 +02:00
Ralf Baechle
3207cd5c4b [MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.
Neither rtc_mips_get_time nor rtc_mips_set_time are being initialized by
the EMMA2RH setup code, so genrtc at best was a RTC dummy avoiding a few
error messages but not providing actual functionality.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:34 +02:00
Pavel Kiryukhin
a76f3a417a [MIPS] use compat_siginfo in rt_sigframe_n32
Signed-off-by: Pavel Kiryukhin <vksavl@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Ralf Baechle
c8eae71dc8 [MIPS] 20K: Handle WAIT related bugs according to errata information
We used to avoid the WAIT entirely on the 20K but really only need to do
this on early revs of the 20K.  Without this a 20K was a bit of a
power hog.  Well, in the lower power power hog category ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Ralf Baechle
b0c10b9f4c [MIPS] AP/SP requires shadow registers, auto enable support.
Noticed by Chris Dearman (chris@mips.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Yoichi Yuasa
b3a04a6d07 [MIPS] Fix pb1500 reg B access
au_readl() is correct here.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Yoichi Yuasa
08a4593682 [MIPS] Alchemy: Fix wrong cast
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Yoichi Yuasa
e460b73c87 [MIPS] remove "support for" from system type entry
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Yoichi Yuasa
2ec0e59aff [MIPS] add io_map_base to pci_controller on Cobalt
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:33 +02:00
Ralf Baechle
3ca507920d [MIPS] __ucmpdi2 arguments are unsigned long long.
Reported by Eugene Surovegin <ebs@ebshome.net>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-26 19:57:32 +02:00
David S. Miller
a357b8f42e [SPARC64]: Need to set state to IDLE during sun4v IRQ enable.
This fixes hypervisor console interrupts on LDOM guests.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-26 00:13:31 -07:00
David S. Miller
1245088400 [SPARC64]: Fix VIRQ enabling.
We were doing the wrong call to turn them on, and also
when enabling we need to forcefully set the state to IDLE.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-26 00:13:09 -07:00
Paul Mackerras
ae62fbb5f1 [POWERPC] Fix subtle FP state corruption bug in signal return on SMP
This fixes a bug which can cause corruption of the floating-point state
on return from a signal handler.  If we have a signal handler that has
used the floating-point registers, and it happens to context-switch to
another task while copying the interrupted floating-point state from the
user stack into the thread struct (e.g. because of a page fault, or
because it gets preempted), the context switch code will think that the
FP registers contain valid FP state that needs to be copied into the
thread_struct, and will thus overwrite the values that the signal return
code has put into the thread_struct.

This can occur because we clear the MSR bits that indicate the presence
of valid FP state after copying the state into the thread_struct.  To fix
this we just move the clearing of the MSR bits to before the copy.  A
similar potential problem also occurs with the Altivec state, and this
fixes that in the same way.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 14:49:11 +10:00
Tony Breeds
74609f4536 [POWERPC] Fix VDSO gettimeofday() when called with NULL struct timeval
Consider the prototype for gettimeofday():
	int gettimofday(struct timeval *tv, struct timezone *tz);

Although it is valid to call with /either/ tv or tz being NULL, and
the C version of sys_gettimeofday() supports this, the current version
of gettimeofday() in the VDSO will SEGV if called with a NULL tv.

This adds a check for tv being NULL so that it doesn't SEGV.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 14:41:19 +10:00
Paul Mackerras
ca74c01344 [POWERPC] Update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 14:38:47 +10:00
will schmidt
d30d6badd1 [POWERPC] Update g5_defconfig
Update the g5_defconfig with default settings.
This is to keep things up to date, and specifically to ensure that the
CONFIG_MACINTOSH_DRIVERS option is enabled.  This also turns on
CONFIG_MSI.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 14:38:42 +10:00
Nicolas Pitre
0c07f6115b [ARM] 4449/1: more entries in arch/arm/boot/.gitignore
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-25 20:37:35 +01:00
Catalin Marinas
92c83ff1ce [ARM] 4452/1: Force the literal pool dump before reloc_end
In the arch/arm/boot/compressed/head.S file, the contents of the
literal pool accumulated during the relocatable code must be dumped
before reloc_end.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-25 20:36:27 +01:00
Tian Kevin
c8cbee61c9 ACPI: preserve the ebx value in acpi_copy_wakeup_routine
Register %ebx serves as the "global offset table base register" for
position-independent code.  For absolute code, %ebx serves as a local
register and has no specified role in the function calling sequence.  In
either case, a function must preserve the register value for the caller.

acpi_copy_wakeup_routine overrides %ebx without saving it, this may corrupt
the called data.

Kevin found that most time the value of Sx is saved in %esi, however
sometimes compiler also uses %ebx.  When this happens, suspends fails since
sleep value in ebx is changed by acpi_copy_wakeup_routine.

The same funtion in X86_64 doesn't have this problem.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Looks-okay-to: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24 08:59:12 -07:00
Joshua Wise
4f84e4be53 x86_64: fix misplaced `continue' in mce.c
Background:
  When a userspace application wants to know about machine check events, it
  opens /dev/mcelog and does a read(). Usually, we found that this interface
  works well, but in some cases, when the system was taking large numbers of
  machine check exceptions, the read() would hang. The system would output a
  soft-lockup warning, and the daemon reading from /dev/mcelog would suck up
  as much of a single CPU as it could spinning in system space.

Description:
  This patch fixes this bug. In particular, there was a "continue" inside a
  timeout loop that presumably was intended to break out of the outer loop,
  but instead caused the inner loop to continue. This patch also makes the
  condition for the break-out a little more evident by changing a
  !time_before to a time_after_eq.

Result:
  The read() no longer hangs in this test case.

Testing:
  On my system, I could replicate the bug with the following command:
    # for i in `seq 15000`; do ./inject_sbe.sh; done
  where inject_sbe.sh contains commands to inject a single-bit error into the
  next memory write transaction.

Patch:
  This patch is against git f1518a088b.

Signed-off-by: Joshua Wise <jwise@google.com>
Signed-off-by: Tim Hockin <thockin@google.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24 08:59:12 -07:00
Ivan Kokshaysky
58ed2f9c75 alpha: fix alignment problem in csum_ipv6_magic()
Hopefully this fixes http://bugzilla.kernel.org/show_bug.cgi?id=8635

The struct in6_addr passed to csum_ipv6_magic() is 4 byte aligned, so we
can't use the regular 64-bit loads.  Since the cost of handling of 4 byte
and 1 byte aligned 64-bit data is roughly the same, this code can cope with
any src/dst [mis]alignment.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Dustin Marquess <jailbird@alcatraz.fdf.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24 08:59:11 -07:00
Haavard Skinnemoen
af6f2b2b5c [AVR32] Update defconfigs
Update defconfigs for ATNGW100 and ATSTK1002. This will enable the
SLUB allocator by default on both, and will enable NFS root on
ATSTK1002 (ATNGW100 had it enabled before.)

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-06-23 15:43:48 +02:00
David Brownell
6b84bbfc71 [AVR32] Initialize dma_mask and dma_coherent_mask
The current at32ap7000 platform devices aren't declared as supporting DMA,
so that layered drivers can't tell whether they need to manage DMA.

This patch makes all those platform devices report that they support DMA.
Most do, but in a few cases this is inappropriate.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-06-23 14:53:16 +02:00
ben.nizette@iinet.net.au
7f8b9acae8 [AVR32] NGW100, Remove relics of the old USART mapping scheme
USART mapping used to be accomplished by the manual filling of
at32_usart_map[] and at32_nr_usarts.  This has now been replaced
with at32_map_usart() so we can remove these variables.

Signed-off-by: Ben Nizette <ben.nizette@iinet.net.au>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-06-23 14:52:58 +02:00
Haavard Skinnemoen
ab61f7d21a [AVR32] Fix bug in invalidate_dcache_region()
If (start + size) is not cacheline aligned and (start & mask) > (end &
mask), the last but one cacheline won't be invalidated as it should.
Fix this by rounding `end' down to the nearest cacheline boundary if
it gets adjusted due to misalignment.

Also flush the write buffer unconditionally -- if the dcache wrote
back a line just before we invalidated it, the dirty data may be
sitting in the write buffer waiting to corrupt our buffer later.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-06-23 14:52:52 +02:00
Andi Kleen
75154f402e x86_64: Ignore compat mode SYSCALL when IA32_EMULATION is not defined
Previously a program could switch to a compat mode segment and then
execute SYSCALL and it would jump to an uninitialized MSR and crash
the kernel.

Instead supply a dummy target for this case.

Pointed out by Jan Beulich

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-22 18:41:19 -07:00