Commit Graph

67 Commits

Author SHA1 Message Date
J. Bruce Fields
7a6ef8c723 nfsd4: nfsd4_create_clid_dir return value is unused
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-01-05 15:38:41 -05:00
J. Bruce Fields
009673b439 nfsd4: add a separate (lockowner, inode) lookup
Address the possible performance regression mentioned in "nfsd4: hash
lockowners to simplify RELEASE_LOCKOWNER" by providing a separate
(lockowner, inode) hash.

Really, I doubt this matters much, but I think it's likely we'll change
these data structures here and I'd rather that the need for (owner,
inode) lookups be well-documented.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-11-15 19:26:08 -05:00
Benny Halevy
5423732a71 nfsd41: use SEQ4_STATUS_BACKCHANNEL_FAULT when cb_sequence is invalid
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24 04:24:27 -04:00
J. Bruce Fields
996e09385c nfsd4: do idr preallocation with stateid allocation
Move idr preallocation out of stateid initialization, into stateid
allocation, so that we no longer have to handle any errors from the
former.

This is a little subtle due to the way the idr code manages these
preallocated items--document that in comments.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17 17:50:07 -04:00
J. Bruce Fields
d29b20cd58 nfsd4: clean up open owners on OPEN failure
If process_open1() creates a new open owner, but the open later fails,
the current code will leave the open owner around.  It won't be on the
close_lru list, and the client isn't expected to send a CLOSE, so it
will hang around as long as the client does.

Similarly, if process_open1() removes an existing open owner from the
close lru, anticipating that an open owner that previously had no
associated stateid's now will, but the open subsequently fails, then
we'll again be left with the same leak.

Fix both problems.

Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17 17:33:57 -04:00
J. Bruce Fields
3557e43b8f nfsd4: make is_open_owner boolean
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17 17:09:37 -04:00
J. Bruce Fields
b31b30e5c7 nfsd4: cleanup state.h comments
These comments are mostly out of date.

Reported-by: Bryan Schumaker <bjschuma@netapp.com>
2011-10-10 18:04:46 -04:00
J. Bruce Fields
6409a5a65d nfsd4: clean up downgrading code
In response to some review comments, get rid of the somewhat obscure
for-loop with bitops, and improve a comment.

Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-10 18:04:45 -04:00
J. Bruce Fields
38c2f4b12a nfsd4: look up stateid's per clientid
Use a separate stateid idr per client, and lookup a stateid by first
finding the client, then looking up the stateid relative to that client.

Also some minor refactoring.

This allows us to improve error returns: we can return expired when the
clientid is not found and bad_stateid when the clientid is found but not
the stateid, as opposed to returning expired for both cases.

I hope this will also help to replace the state lock mostly by a
per-client lock, but that hasn't been done yet.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-26 17:35:28 -04:00
J. Bruce Fields
36279ac10c nfsd4: assume test_stateid always has session
Test_stateid is 4.1-only and only allowed after a sequence operation, so
this check is unnecessary.

Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-26 17:35:27 -04:00
J. Bruce Fields
6136d2b409 nfsd4: use idr for stateid's
The idr system is designed exactly for generating id and looking up
integer id's.  Thanks to Trond for pointing it out.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-26 17:35:26 -04:00
J. Bruce Fields
2a74aba799 nfsd4: move client * to nfs4_stateid, add init_stid helper
This will be convenient.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-26 17:35:25 -04:00
J. Bruce Fields
f7a4d87207 nfsd4: hash closed stateid's like any other
Look up closed stateid's in the stateid hash like any other stateid
rather than searching the close lru.

This is simpler, and fixes a bug: currently we handle only the case of a
close that is the last close for a given stateowner, but not the case of
a close for a stateowner that still has active opens on other files.
Thus in a case like:

	open(owner, file1)
	open(owner, file2)
	close(owner, file2)
	close(owner, file2)

the final close won't be recognized as a retransmission.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-19 08:39:34 -04:00
J. Bruce Fields
d3b313a463 nfsd4: construct stateid from clientid and counter
Including the full clientid in the on-the-wire stateid allows more
reliable detection of bad vs. expired stateid's, simplifies code, and
ensures we won't reuse the opaque part of the stateid (as we currently
do when the same openowner closes and reopens the same file).

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-19 06:33:57 -04:00
J. Bruce Fields
38c387b52d nfsd4: match close replays on stateid, not open owner id
Keep around an unhashed copy of the final stateid after the last close
using an openowner, and when identifying a replay, match against that
stateid instead of just against the open owner id.  Free it the next
time the seqid is bumped or the stateowner is destroyed.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-17 10:01:54 -04:00
J. Bruce Fields
dad1c067eb nfsd4: replace oo_confirmed by flag bit
I want at least one more bit here.  So, let's haul out the caps lock key
and add a flags field.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-16 17:44:16 -04:00
J. Bruce Fields
f459e45359 nfsd4: hash deleg stateid's like any other
It's simpler to look up delegation stateid's in the same hash table as
any other stateid.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:34 -04:00
J. Bruce Fields
d5477a8db8 nfsd4: add common dl_stid field to delegation
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:32 -04:00
J. Bruce Fields
dcef0413da nfsd4: move some of nfs4_stateid into a separate structure
We want delegations to share more with open/lock stateid's, so first
we'll pull out some of the common stuff we want to share.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:29:58 -04:00
J. Bruce Fields
2288d0e395 nfsd4: pass around typemask instead of flags
We're only using those flags to choose lock or open stateid's at this
point.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:29:00 -04:00
J. Bruce Fields
c0a5d93efb nfsd4: split preprocess_seqid, cleanup
Move most of this into helper functions.  Also move the non-CONFIRM case
into caller, providing a helper function for that purpose.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:27:35 -04:00
J. Bruce Fields
fe0750e5c4 nfsd4: split stateowners into open and lockowners
The stateowner has some fields that only make sense for openowners, and
some that only make sense for lockowners, and I find it a lot clearer if
those are separated out.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-07 09:45:49 -04:00
J. Bruce Fields
f4dee24cca nfsd4: move CLOSE_STATE special case to caller
Move the CLOSE_STATE case into the unique caller that cares about it
rather than putting it in preprocess_seqid_op.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-03 23:15:28 -04:00
J. Bruce Fields
7c13f344cf nfsd4: drop most stateowner refcounting
Maybe we'll bring it back some day, but we don't have much real use for
it now.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-01 11:12:47 -04:00
J. Bruce Fields
81b829655d nfsd4: simplify stateid generation code, fix wraparound
Follow the recommendation from rfc3530bis for stateid generation number
wraparound, simplify some code, and fix or remove incorrect comments.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-31 17:56:00 -04:00
J. Bruce Fields
5fa0bbb4ee nfsd4: simplify distinguishing lock & open stateid's
The trick free_stateid is using is a little cheesy, and we'll have more
uses for this field later.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-31 17:55:59 -04:00
J. Bruce Fields
c2d8eb7ac6 nfsd4: remove typoed replay field
Wow, I wonder how long that typo's been there.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-31 17:55:58 -04:00
J. Bruce Fields
28dde241cc nfsd4: remove HAS_SESSION
This flag doesn't really buy us anything.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-27 14:21:25 -04:00
J. Bruce Fields
48483bf23a nfsd4: simplify recovery dir setting
Move around some of this code, simplify a bit.

Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-27 14:21:18 -04:00
J. Bruce Fields
576163005d nfsd4: fix seqid_mutating_error
The set of errors here does *not* agree with the set of errors specified
in the rfc!

While we're there, turn this macros into a function, for the usual
reasons, and move it to the one place where it's actually used.

Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-19 13:25:31 -04:00
Bryan Schumaker
1745680454 NFSD: Added TEST_STATEID operation
This operation is used by the client to check the validity of a list of
stateids.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-07-15 18:58:48 -04:00
J. Bruce Fields
9ae78bcc00 nfsd4: fix comment and remove unused nfsd4_file fields
A couple fields here were left over from a previous version of a patch,
and are no longer used.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-03-17 12:52:33 -04:00
J. Bruce Fields
acfdf5c383 nfsd4: acquire only one lease per file
Instead of acquiring one lease each time another client opens a file,
nfsd can acquire just one lease to represent all of them, and reference
count it to determine when to release it.

This fixes a regression introduced by
c45821d263 "locks: eliminate fl_mylease
callback": after that patch, only the struct file * is used to determine
who owns a given lease.  But since we recently converted the server to
share a single struct file per open, if we acquire multiple leases on
the same file from nfsd, it then becomes impossible on unlocking a lease
to determine which of those leases (all of whom share the same struct
file *) we meant to remove.

Thanks to Takashi Iwai <tiwai@suse.de> for catching a bug in a previous
version of this patch.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-02-14 10:35:19 -05:00
J. Bruce Fields
5ce8ba25d6 nfsd4: allow restarting callbacks
If we lose the backchannel and then the client repairs the problem,
resend any callbacks.

We use a new cb_done flag to track whether there is still work to be
done for the callback or whether it can be destroyed with the rpc.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-11 15:04:11 -05:00
J. Bruce Fields
84f5f7ccc5 nfsd4: make sure sequence flags are set after destroy_session
If this loses any backchannel, make sure we have a chance to notice that
and set the sequence flags.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-11 15:04:11 -05:00
J. Bruce Fields
77a3569d6c nfsd4: keep finer-grained callback status
Distinguish between when the callback channel is known to be down, and
when it is not yet confirmed.  This will be useful in the 4.1 case.

Also, we don't seem to be using the fact that this field is atomic.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2011-01-11 15:04:10 -05:00
J. Bruce Fields
1d1bc8f207 nfsd4: support BIND_CONN_TO_SESSION
Basic xdr and processing for BIND_CONN_TO_SESSION.  This adds a
connection to the list of connections associated with a session.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-11 15:04:09 -05:00
Takuma Umeya
6f3d772fb8 nfs4: set source address when callback is generated
when callback is generated in NFSv4 server, it doesn't set the source
address. When an alias IP is utilized on NFSv4 server and suppose the
client is accessing via that alias IP (e.g. eth0:0), the client invokes
the callback to the IP address that is set on the original device (e.g.
eth0). This behavior results in timeout of xprt.
The patch sets the IP address that the client should invoke callback to.

Signed-off-by: Takuma Umeya <tumeya@redhat.com>
[bfields@redhat.com: Simplify gen_callback arguments, use helper function]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-04 19:43:01 -05:00
J. Bruce Fields
c84d500bc4 nfsd4: use a single struct file for delegations
When we converted to sharing struct filess between nfs4 opens I went too
far and also used the same mechanism for delegations.  But keeping
a reference to the struct file ensures it will outlast the lease, and
allows us to remove the lease with the same file as we added it.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-04 16:49:27 -05:00
J. Bruce Fields
8323c3b2a6 nfsd4: move minorversion to client
The minorversion seems more a property of the client than the callback
channel.

Some time we should probably also enforce consistent minorversion usage
from the client; for now, this is just a cosmetic change.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-21 10:12:02 -04:00
J. Bruce Fields
5a3c9d7134 nfsd4: separate callback change and callback probe
Only one of the nfsd4_callback_probe callers actually cares about
changing the callback information.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-21 10:11:55 -04:00
J. Bruce Fields
8b5ce5cd44 nfsd4: callback program number is per-session
The callback program is allowed to depend on the session which the
callback is going over.

No change in behavior yet, while we still only do callbacks over a
single session for the lifetime of the client.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-21 10:11:54 -04:00
J. Bruce Fields
ac7c46f29a nfsd4: make backchannel sequence number per-session
Currently we don't deal well with a client that has multiple sessions
associated with it (even simultaneously, or serially over the lifetime
of the client).

In particular, we don't attempt to keep the backchannel running after
the original session diseappears.

We will fix that soon.

Once we do that, we need the slot sequence number to be per-session;
otherwise, for example, we cannot correctly handle a case like this:

	- All session 1 connections are lost.
	- The client creates session 2.  We use it for the backchannel
	  (since it's the only working choice).
	- The client gives us a new connection to use with session 1.
	- The client destroys session 2.

At this point our only choice is to go back to using session 1.  When we
do so we must use the sequence number that is next for session 1.  We
therefore need to maintain multiple sequence number streams.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-21 10:11:51 -04:00
J. Bruce Fields
90c8145bb6 nfsd4: use client pointer to backchannel session
Instead of copying the sessionid, use the new cl_cb_session pointer,
which indicates which session we're using for the backchannel.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-21 10:11:50 -04:00
J. Bruce Fields
edd7678663 nfsd4: move callback setup into session init code
The backchannel should  be associated with a session, it isn't really
global to the client.

We do, however, want a pointer global to the client which tracks which
session we're currently using for client-based callbacks.

This is a first step in that direction; for now, just reshuffling of
code with no significant change in behavior.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-21 10:11:49 -04:00
J. Bruce Fields
19cf5c026f nfsd4: use callbacks on svc_xprt_deletion
Remove connections from the list when they go down.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-01 19:29:44 -04:00
J. Bruce Fields
c7662518c7 nfsd4: keep per-session list of connections
The spec requires us in various places to keep track of the connections
associated with each session.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-01 19:29:44 -04:00
J. Bruce Fields
6ff8da0887 nfsd4: Move callback setup to callback queue
Instead of creating the new rpc client from a regular server thread,
set a flag, kick off a null call, and allow the null call to do the work
of setting up the client on the callback workqueue.

Use a spinlock to ensure the callback work gets a consistent view of the
callback parameters.

This allows, for example, changing the callback from contexts where
sleeping is not allowed.  I hope it will also keep the locking simple as
we add more session and trunking features, by serializing most of the
callback-specific work.

This also closes a small race where the the new cb_ident could be used
with an old connection (or vice-versa).

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-01 19:29:44 -04:00
J. Bruce Fields
fb00392326 nfsd4: remove separate cb_args struct
I don't see the point of the separate struct.  It seems to just be
getting in the way.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-01 19:29:43 -04:00
J. Bruce Fields
cee277d924 nfsd4: use generic callback code in null case
This will eventually allow us, for example, to kick off null callback
from contexts where we can't sleep.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-01 19:29:43 -04:00