Commit Graph

12420 Commits

Author SHA1 Message Date
Gleb Natapov
fc5f06fac6 KVM: Send async PF when guest is not in userspace too.
If guest indicates that it can handle async pf in kernel mode too send
it, but only if interrupts are enabled.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:22 +02:00
Gleb Natapov
6adba52742 KVM: Let host know whether the guest can handle async PF in non-userspace context.
If guest can detect that it runs in non-preemptable context it can
handle async PFs at any time, so let host know that it can send async
PF even if guest cpu is not in userspace.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:21 +02:00
Gleb Natapov
6c047cd982 KVM paravirt: Handle async PF in non preemptable context
If async page fault is received by idle task or when preemp_count is
not zero guest cannot reschedule, so do sti; hlt and wait for page to be
ready. vcpu can still process interrupts while it waits for the page to
be ready.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:19 +02:00
Gleb Natapov
7c90705bf2 KVM: Inject asynchronous page fault into a PV guest if page is swapped out.
Send async page fault to a PV guest if it accesses swapped out memory.
Guest will choose another task to run upon receiving the fault.

Allow async page fault injection only when guest is in user mode since
otherwise guest may be in non-sleepable context and will not be able
to reschedule.

Vcpu will be halted if guest will fault on the same page again or if
vcpu executes kernel code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:17 +02:00
Gleb Natapov
631bc48782 KVM: Handle async PF in a guest.
When async PF capability is detected hook up special page fault handler
that will handle async page fault events and bypass other page faults to
regular page fault handler. Also add async PF handling to nested SVM
emulation. Async PF always generates exit to L1 where vcpu thread will
be scheduled out until page is available.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:16 +02:00
Gleb Natapov
fd10cde929 KVM paravirt: Add async PF initialization to PV guest.
Enable async PF in a guest if async PF capability is discovered.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:14 +02:00
Gleb Natapov
344d9588a9 KVM: Add PV MSR to enable asynchronous page faults delivery.
Guest enables async PF vcpu functionality using this MSR.

Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:12 +02:00
Gleb Natapov
ca3f10172e KVM paravirt: Move kvm_smp_prepare_boot_cpu() from kvmclock.c to kvm.c.
Async PF also needs to hook into smp_prepare_boot_cpu so move the hook
into generic code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:10 +02:00
Gleb Natapov
49c7754ce5 KVM: Add memory slot versioning and use it to provide fast guest write interface
Keep track of memslots changes by keeping generation number in memslots
structure. Provide kvm_write_guest_cached() function that skips
gfn_to_hva() translation if memslots was not changed since previous
invocation.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:08 +02:00
Gleb Natapov
56028d0861 KVM: Retry fault before vmentry
When page is swapped in it is mapped into guest memory only after guest
tries to access it again and generate another fault. To save this fault
we can map it immediately since we know that guest is going to access
the page. Do it only when tdp is enabled for now. Shadow paging case is
more complicated. CR[034] and EFER registers should be switched before
doing mapping and then switched back.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:06 +02:00
Gleb Natapov
af585b921e KVM: Halt vcpu if page it tries to access is swapped out
If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.

Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.

[avi: remove call to get_user_pages_noio(), nacked by Linus; this
      makes everything synchrnous again]

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:21:39 +02:00
Huang Ying
81e88fdc43 ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support
Generic Hardware Error Source provides a way to report platform
hardware errors (such as that from chipset). It works in so called
"Firmware First" mode, that is, hardware errors are reported to
firmware firstly, then reported to Linux by firmware. This way, some
non-standard hardware error registers or non-standard hardware link
can be checked by firmware to produce more valuable hardware error
information for Linux.

This patch adds POLL/IRQ/NMI notification types support.

Because the memory area used to transfer hardware error information
from BIOS to Linux can be determined only in NMI, IRQ or timer
handler, but general ioremap can not be used in atomic context, so a
special version of atomic ioremap is implemented for that.

Known issue:

- Error information can not be printed for recoverable errors notified
  via NMI, because printk is not NMI-safe. Will fix this via delay
  printing to IRQ context via irq_work or make printk NMI-safe.

v2:

- adjust printk format per comments.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 03:06:19 -05:00
Konrad Rzeszutek Wilk
e1b478e4ec xen/p2m: Fix module linking error.
Fixes:
ERROR: "m2p_find_override_pfn" [drivers/block/xen-blkfront.ko] undefined!

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 15:09:16 -05:00
Jeremy Fitzhardinge
87f1d40a70 xen p2m: clear the old pte when adding a page to m2p_override
When adding a page to m2p_override we change the p2m of the page so we
need to also clear the old pte of the kernel linear mapping because it
doesn't correspond anymore.

When we remove the page from m2p_override we restore the original p2m of
the page and we also restore the old pte of the kernel linear mapping.

Before changing the p2m mappings in m2p_add_override and
m2p_remove_override, check that the page passed as argument is valid and
return an error if it is not.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:32:14 -05:00
Stefano Stabellini
9b705f0e98 xen p2m: transparently change the p2m mappings in the m2p override
In m2p_add_override store the original mfn into page->index and then
change the p2m mapping, setting mfns as FOREIGN_FRAME.

In m2p_remove_override restore the original mapping.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:53 -05:00
Jeremy Fitzhardinge
448f283193 xen: add m2p override mechanism
Add a simple hashtable based mechanism to override some portions of the
m2p, so that we can find out the pfn corresponding to an mfn of a
granted page. In fact entries corresponding to granted pages in the m2p
hold the original pfn value of the page in the source domain that
granted it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:18 -05:00
Jeremy Fitzhardinge
b5eafe924b xen: move p2m handling to separate file
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:07 -05:00
Linus Torvalds
16ee8db6a9 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix Moorestown VRTC fixmap placement
  x86/gpio: Implement x86 gpio_to_irq convert function
  x86, UV: Fix APICID shift for Westmere processors
  x86: Use PCI method for enabling AMD extended config space before MSR method
  x86: tsc: Prevent delayed init if initial tsc calibration failed
  x86, lapic-timer: Increase the max_delta to 31 bits
  x86: Fix sparse non-ANSI function warnings in smpboot.c
  x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation
  x86, AMD, PCI: Add AMD northbridge PCI device id for CPU families 12h and 14h
  x86, numa: Fix cpu to node mapping for sparse node ids
  x86, numa: Fake node-to-cpumask for NUMA emulation
  x86, numa: Fake apicid and pxm mappings for NUMA emulation
  x86, numa: Avoid compiling NUMA emulation functions without CONFIG_NUMA_EMU
  x86, numa: Reduce minimum fake node size to 32M

Fix up trivial conflict in arch/x86/kernel/apic/x2apic_uv_x.c
2011-01-11 11:11:46 -08:00
Linus Torvalds
42776163e1 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  perf session: Fix infinite loop in __perf_session__process_events
  perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1)
  perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail
  perf tools: Emit clearer message for sys_perf_event_open ENOENT return
  perf stat: better error message for unsupported events
  perf sched: Fix allocation result check
  perf, x86: P4 PMU - Fix unflagged overflows handling
  dynamic debug: Fix build issue with older gcc
  tracing: Fix TRACE_EVENT power tracepoint creation
  tracing: Fix preempt count leak
  tracepoint: Add __rcu annotation
  tracing: remove duplicate null-pointer check in skb tracepoint
  tracing/trivial: Add missing comma in TRACE_EVENT comment
  tracing: Include module.h in define_trace.h
  x86: Save rbp in pt_regs on irq entry
  x86, dumpstack: Fix unused variable warning
  x86, NMI: Clean-up default_do_nmi()
  x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU
  x86, NMI: Remove DIE_NMI_IPI
  x86, NMI: Add priorities to handlers
  ...
2011-01-11 11:02:13 -08:00
Christoph Lameter
2485b6464c x86,percpu: Move out of place 64 bit ops into X86_64 section
Some operations that operate on 64 bit operands are defined for 32 bit.
Move them into the correct section.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-11 18:54:53 +01:00
Arjan van de Ven
fa36e956c5 x86: Fix Moorestown VRTC fixmap placement
The x86 fixmaps need to be all together... unfortunately the
VRTC one was misplaced.

This patch makes sure the MRST VRTC fixmap is put prior to the
__end_of_permanent_fixed_addresses marker.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20110111105544.24448.27607.stgit@bob.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-11 12:46:16 +01:00
Alek Du
718c45bd1a x86/gpio: Implement x86 gpio_to_irq convert function
We need this for x86 MID platforms where GPIO interrupts are
used. No special magic is needed so the default 1:1 behaviour
will do nicely.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20110111105439.24448.69863.stgit@bob.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-11 12:46:15 +01:00
Jack Steiner
990a32d1e5 x86, UV: Fix APICID shift for Westmere processors
Westmere processors use a different algorithm for
assigning APICIDs on SGI UV systems. The location of the
node number within the apicid is now a function of the
processor type.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20110110195210.GA18737@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-11 12:44:45 +01:00
Jan Beulich
24d9b70b8c x86: Use PCI method for enabling AMD extended config space before MSR method
While both methods should work equivalently well for the native
case, the Xen Dom0 case can't reliably work with the MSR one,
since there's no guarantee that the virtual CPUs it has
available fully cover all necessary physical ones.

As per the suggestion of Robert Richter the patch only adds the
PCI method, but leaves the MSR one as a fallback to cover new
systems the PCI IDs of which may not have got added to the code
base yet.

The only change in v2 is the breaking out of the new CPI
initialization method into a separate function, as requested by
Ingo.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Andreas Herrmann3 <Andreas.Herrmann3@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <4D2B3FD7020000780002B67D@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-11 12:43:41 +01:00
Thomas Gleixner
29fe359ca2 x86: tsc: Prevent delayed init if initial tsc calibration failed
commit a8760ec (x86: Check tsc available/disabled in the delayed init
function) missed to prevent the setup of the delayed init function in
case the initial tsc calibration failed. This results in the same
divide by zero bug as we have seen without the tsc disabled check.

Skip the delayed work setup when tsc_khz (the initial calibration
value) is 0.

Bisected-and-tested-by: Kirill A. Shutemov <kas@openvz.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-11 11:48:39 +01:00
Linus Torvalds
9f99a2f0e4 Merge branch 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/event: validate irq before get evtchn by irq
  xen/fb: fix potential memory leak
  xen/fb: fix xenfb suspend/resume race.
  xen: disable ACPI NUMA for PV guests
  xen/irq: Cleanup the find_unbound_irq
2011-01-10 08:48:46 -08:00
Linus Torvalds
8c8ae4e8cd Merge branch 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: HVM X2APIC support
  apic: Move hypervisor detection of x2apic to hypervisor.h
2011-01-10 08:48:29 -08:00
Ian Campbell
c1f5db1a53 xen: disable ACPI NUMA for PV guests
Xen does not currently expose PV-NUMA information to PV
guests. Therefore disable NUMA for the time being to prevent the
kernel picking up on an host-level NUMA information which it might
come across in the firmware.

[ Added comment - Jeremy ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-10 10:46:30 -05:00
Pierre Tardy
4aed89d6b5 x86, lapic-timer: Increase the max_delta to 31 bits
Latest atom socs(penwell) does not have hpet timer.

As their local APIC timer is clocked at 400KHZ, and the current
code limit their Initial Counter register to 23 bits, they
cannot sleep more than 1.34 seconds which leads to ~2 spurious
wakeup per second (1 per thread)

These SOCs support 32bit timer so we change the max_delta to at
least 31bits. So we can at least sleep for 300 seconds.

We could not find any previous chip errata where lapic would
only have 23 bit precision As powertop is suggesting to activate
HPET to "sleep longer", this could mean this problem is already
known.

Problem is here since very first implementation of lapic timer
as a clock event e9e2cdb [PATCH] clockevents: i386 drivers.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
LKML-Reference: <1294327409-19426-1-git-send-email-pierre.tardy@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10 09:36:49 +01:00
Ingo Molnar
9adcc4a127 Merge branch 'x86/numa' into x86/urgent
Merge reason: Topic is ready for upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10 09:36:07 +01:00
Ingo Molnar
30285c6f03 Merge branch 'x86/apic-cleanups' into x86/urgent
Merge reason: Topic is ready for upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10 09:34:50 +01:00
Ingo Molnar
4385428a47 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent 2011-01-09 10:42:21 +01:00
Cyrill Gorcunov
047a3772fe perf, x86: P4 PMU - Fix unflagged overflows handling
Don found that P4 PMU reads CCCR register instead of counter
itself (in attempt to catch unflagged event) this makes P4
NMI handler to consume all NMIs it observes. So the other
NMI users such as kgdb simply have no chance to get NMI
on their hands.

Side note: at moment there is no way to run nmi-watchdog
together with perf tool. This is because both 'perf top' and
nmi-watchdog use same event. So while nmi-watchdog reserves
one event/counter for own needs there is no room for perf tool
left (there is a way to disable nmi-watchdog on boot of course).

Ming has tested this patch with the following results

 | 1. watchdog disabled
 |
 | kgdb tests on boot OK
 | perf works OK
 |
 | 2. watchdog enabled, without patch perf-x86-p4-nmi-4
 |
 | kgdb tests on boot hang
 |
 | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb
 | tests on boot
 |
 | "perf top" partialy works
 |   cpu-cycles            no
 |   instructions          yes
 |   cache-references      no
 |   cache-misses          no
 |   branch-instructions   no
 |   branch-misses         yes
 |   bus-cycles            no
 |
 | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied
 |
 | kgdb tests on boot OK
 | perf does not work, NMI "Dazed and confused" messages show up
 |

Which means we still have problems with p4 box due to 'unknown'
nmi happens but at least it should fix kgdb test cases.

Reported-by: Jason Wessel <jason.wessel@windriver.com>
Reported-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Lin Ming <ming.m.lin@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4D275E7E.3040903@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-09 10:40:52 +01:00
Randy Dunlap
91d88ce22b x86: Fix sparse non-ANSI function warnings in smpboot.c
Fix sparse warning for non-ANSI function declaration:

  arch/x86/kernel/smpboot.c💯30: warning: non-ANSI function declaration of function 'cpu_hotplug_driver_lock'
  arch/x86/kernel/smpboot.c:105:32: warning: non-ANSI function declaration of function 'cpu_hotplug_driver_unlock'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110108195914.95d366ea.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-09 10:15:19 +01:00
Linus Torvalds
72eb6a7914 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
  gameport: use this_cpu_read instead of lookup
  x86: udelay: Use this_cpu_read to avoid address calculation
  x86: Use this_cpu_inc_return for nmi counter
  x86: Replace uses of current_cpu_data with this_cpu ops
  x86: Use this_cpu_ops to optimize code
  vmstat: User per cpu atomics to avoid interrupt disable / enable
  irq_work: Use per cpu atomics instead of regular atomics
  cpuops: Use cmpxchg for xchg to avoid lock semantics
  x86: this_cpu_cmpxchg and this_cpu_xchg operations
  percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
  percpu,x86: relocate this_cpu_add_return() and friends
  connector: Use this_cpu operations
  xen: Use this_cpu_inc_return
  taskstats: Use this_cpu_ops
  random: Use this_cpu_inc_return
  fs: Use this_cpu_inc_return in buffer.c
  highmem: Use this_cpu_xx_return() operations
  vmstat: Use this_cpu_inc_return for vm statistics
  x86: Support for this_cpu_add, sub, dec, inc_return
  percpu: Generic support for this_cpu_add, sub, dec, inc_return
  ...

Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.
2011-01-07 17:02:58 -08:00
Frederic Weisbecker
625dbc3b8a x86: Save rbp in pt_regs on irq entry
From the x86_64 low level interrupt handlers, the frame pointer is
saved right after the partial pt_regs frame.

rbp is not supposed to be part of the irq partial saved registers,
but it only requires to extend the pt_regs frame by 8 bytes to
do so, plus a tiny stack offset fixup on irq exit.

This changes a bit the semantics or get_irq_entry() that is supposed
to provide only the value of caller saved registers and the cpu
saved frame. However it's a win for unwinders that can walk through
stack frames on top of get_irq_regs() snapshots.

A noticeable impact is that it makes perf events cpu-clock and
task-clock events based callchains working on x86_64.

Let's then save rbp into the irq pt_regs.

As a result with:

	perf record -e cpu-clock perf bench sched messaging
	perf report --stdio

Before:
    20.94%             perf  [kernel.kallsyms]        [k] lock_acquire
                       |
                       --- lock_acquire
                          |
                          |--44.01%-- __write_nocancel
                          |
                          |--43.18%-- __read
                          |
                          |--6.08%-- fork
                          |          create_worker
                          |
                          |--0.88%-- _dl_fixup
                          |
                          |--0.65%-- do_lookup_x
                          |
                          |--0.53%-- __GI___libc_read
                           --4.67%-- [...]

After:
    19.23%         perf  [kernel.kallsyms]    [k] __lock_acquire
                   |
                   --- __lock_acquire
                      |
                      |--97.74%-- lock_acquire
                      |          |
                      |          |--21.82%-- _raw_spin_lock
                      |          |          |
                      |          |          |--37.26%-- unix_stream_recvmsg
                      |          |          |          sock_aio_read
                      |          |          |          do_sync_read
                      |          |          |          vfs_read
                      |          |          |          sys_read
                      |          |          |          system_call
                      |          |          |          __read
                      |          |          |
                      |          |          |--24.09%-- unix_stream_sendmsg
                      |          |          |          sock_aio_write
                      |          |          |          do_sync_write
                      |          |          |          vfs_write
                      |          |          |          sys_write
                      |          |          |          system_call
                      |          |          |          __write_nocancel

v2: Fix cfi annotations.

Reported-by: Soeren Sandmann Pedersen <sandmann@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jan Beulich <JBeulich@novell.com>
2011-01-07 17:40:56 +01:00
Rakib Mullick
39a6eebda2 x86, dumpstack: Fix unused variable warning
In dump_stack function, bp isn't used anymore, which is introduced by
commit 9c0729dc80. This patch removes bp
completely.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Soeren Sandmann <sandmann@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2011-01-07 16:59:49 +01:00
Sheng Yang
d9b8ca8474 xen: HVM X2APIC support
This patch is similiar to Gleb Natapov's patch for KVM, which enable the
hypervisor to emulate x2apic feature for the guest. By this way, the emulation
of lapic would be simpler with x2apic interface(MSR), and faster.

[v2: Re-organized 'xen_hvm_need_lapic' per Ian Campbell suggestion]

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-07 10:03:50 -05:00
Sheng Yang
2904ed8dd5 apic: Move hypervisor detection of x2apic to hypervisor.h
Then we can reuse it for Xen later.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-07 10:03:49 -05:00
Don Zickus
f2fd43954a x86, NMI: Clean-up default_do_nmi()
Just re-arrange the code a bit to make it easier to follow what is
going on.  Basically un-negating the if-statement and swapping the code
inside the if-statement with code outside.

No functional changes.

Originally-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:53 +01:00
Don Zickus
ab846f13f6 x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU
In original NMI handler, NMI reason io port (0x61) is only processed
on BSP.  This makes it impossible to hot-remove BSP.  To solve the
issue, a raw spinlock is used to allow the port to be processed on any
CPU.

Originally-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:53 +01:00
Don Zickus
c410b83077 x86, NMI: Remove DIE_NMI_IPI
With priorities in place and no one really understanding the difference between
DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI.

This also simplifies default_do_nmi() a little bit.  Instead of calling the
die_notifier in both the if and else part, just pull it out and call it before
the if-statement.  This has the side benefit of avoiding a call to the ioport
to see if there is an external NMI sitting around until after the (more frequent)
internal NMIs are dealt with.

Patch-Inspired-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:53 +01:00
Don Zickus
166d751479 x86, NMI: Add priorities to handlers
In order to consolidate the NMI die_chain events, we need to setup the priorities
for the die notifiers.

I started by defining a bunch of common priorities that can be used by the
notifier blocks.  Then I modified the notifier blocks to use the newly created
priorities.

Now that the priorities are straightened out, it should be easier to remove the
event DIE_NMI_IPI.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:52 +01:00
Don Zickus
673a6092ce x86: Convert some devices to use DIE_NMIUNKNOWN
They are a handful of places in the code that register a die_notifier
as a catch all in case no claims the NMI.  Unfortunately, they trigger
on events like DIE_NMI and DIE_NMI_IPI, which depending on when they
registered may collide with other handlers that have the ability to
determine if the NMI is theirs or not.

The function unknown_nmi_error() makes one last effort to walk the
die_chain when no one else has claimed the NMI before spitting out
messages that the NMI is unknown.

This is a better spot for these devices to execute any code without
colliding with the other handlers.

The two drivers modified are only compiled on x86 arches I believe, so
they shouldn't be affected by other arches that may not have
DIE_NMIUNKNOWN defined.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: dann frazier <dannf@hp.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:52 +01:00
Huang Ying
1c7b74d46f x86, NMI: Add NMI symbol constants and rename memory parity to PCI SERR
Replace the NMI related magic numbers with symbol constants.

Memory parity error is only valid for IBM PC-AT, newer machine use
bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually
reported via MCE. So corresponding function name and kernel log string
is changed.

But on some machines, PCI SERR line is still used to report memory
errors. This is used by EDAC, so corresponding EDAC call is reserved.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:51 +01:00
Ingo Molnar
1c2a48cf65 Merge branch 'linus' into x86/apic-cleanups
Conflicts:
	arch/x86/include/asm/io_apic.h

Merge reason: Resolve the conflict, update to a more recent -rc base

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 14:14:15 +01:00
David Rientjes
d906f0eb2f x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation
"x86, numa: Fake node-to-cpumask for NUMA emulation" broke the
build when CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU
is not.  This is because it is possible to map a cpu to multiple
nodes when NUMA emulation is used; the patch required a physical
node address table to find those nodes that was only available
when CONFIG_NUMA_EMU was enabled.

This extracts the common debug functionality to its own function
for CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
CONFIG_NUMA_EMU is set or not.

NUMA emulation will now iterate over the set of possible nodes
for each cpu and call the new debug function whereas only the
cpu's node will be used without NUMA emulation enabled.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1012301053590.12995@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 14:09:34 +01:00
Rafael J. Wysocki
976513dbfc PM / ACPI: Move NVS saving and restoring code to drivers/acpi
The saving of the ACPI NVS area during hibernation and suspend and
restoring it during the subsequent resume is entirely specific to
ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS
configuration option which is redundant.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07 00:36:55 -05:00
Linus Torvalds
cb600d2f83 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mm: Initialize initial_page_table before paravirt jumps
2011-01-06 11:12:17 -08:00
Linus Torvalds
47935a731b Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, asm: Use fxsaveq/fxrestorq in more places

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Add core threshold notification to therm_throt.c

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Use native_halt on a halt, not native_safe_halt

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking, lockdep: Convert sprintf_symbol to %pS

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Better struct irqaction layout
2011-01-06 11:11:50 -08:00
Linus Torvalds
77a0dd54ba Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV, BAU: Extend for more than 16 cpus per socket
  x86, UV: Fix the effect of extra bits in the hub nodeid register
  x86, UV: Add common uv_early_read_mmr() function for reading MMRs
2011-01-06 11:09:57 -08:00
Linus Torvalds
d7a5a18190 Merge branch 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Check tsc available/disabled in the delayed init function
  x86: Improve TSC calibration using a delayed workqueue
  x86: Make tsc=reliable override boot time stability checks
2011-01-06 11:08:14 -08:00
Linus Torvalds
4f00b901d4 Merge branch 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  module: Move RO/NX module protection to after ftrace module update
  x86: Resume trampoline must be executable
  x86: Add RO/NX protection for loadable kernel modules
  x86: Add NX protection for kernel data
  x86: Fix improper large page preservation
2011-01-06 11:07:33 -08:00
Linus Torvalds
b4c6e2ea5e Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code
2011-01-06 11:06:31 -08:00
Linus Torvalds
6f46b120a9 Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, microcode, AMD: Cleanup code a bit
  x86, microcode, AMD: Replace vmalloc+memset with vzalloc
2011-01-06 11:06:09 -08:00
Linus Torvalds
4e1db5e58a Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  apic, amd: Make firmware bug messages more meaningful
  mce, amd: Remove goto in threshold_create_device()
  mce, amd: Add helper functions to setup APIC
  mce, amd: Shorten local variables mci_misc_{hi,lo}
  mce, amd: Implement mce_threshold_block_init() helper function
2011-01-06 11:05:21 -08:00
Linus Torvalds
37d9a8c5ea Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix included-by file reference comments
  x86, cpu: Only CPU features determine NX capabilities
  x86, cpu: Call verify_cpu during 32bit CPU startup
  x86, cpu: Clear XD_DISABLED flag on Intel to regain NX
  x86, cpu: Rename verify_cpu_64.S to verify_cpu.S
2011-01-06 10:56:02 -08:00
Linus Torvalds
017892c341 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
  x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
  x86, acpi: Add MAX_LOCAL_APIC for 32bit
  x86: io_apic: Split setup_ioapic_ids_from_mpc()
  x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage
  x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
  x86: Allow platforms to force enable apic
2011-01-06 10:51:36 -08:00
Linus Torvalds
42cbd8efb0 Merge branch 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cacheinfo: Cleanup L3 cache index disable support
  x86, amd-nb: Cleanup AMD northbridge caching code
  x86, amd-nb: Complete the rename of AMD NB and related code
2011-01-06 10:50:28 -08:00
Huang Ying
74d91e3c6a x86, NMI: Add touch_nmi_watchdog to io_check_error delay
Prevent the long delay in io_check_error making NMI watchdog
timeout.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:22:58 +01:00
Dongdong Deng
554ec06398 x86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time
The spin_lock_debug/rcu_cpu_stall detector uses
trigger_all_cpu_backtrace() to dump cpu backtrace.
Therefore it is possible that trigger_all_cpu_backtrace()
could be called at the same time on different CPUs, which
triggers and 'unknown reason NMI' warning. The following case
illustrates the problem:

      CPU1                    CPU2                     ...   CPU N
                       trigger_all_cpu_backtrace()
                       set "backtrace_mask" to cpu mask
                               |
generate NMI interrupts  generate NMI interrupts       ...
    \                          |                               /
     \                         |                              /

The "backtrace_mask" will be cleaned by the first NMI interrupt
at nmi_watchdog_tick(), then the following NMI interrupts
generated by other cpus's arch_trigger_all_cpu_backtrace() will
be taken as unknown reason NMI interrupts.

This patch uses a test_and_set to avoid the problem, and stop
the arch_trigger_all_cpu_backtrace() from calling to avoid
dumping a double cpu backtrace info when there is already a
trigger_all_cpu_backtrace() in progress.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: fweisbec@gmail.com
LKML-Reference: <1294198689-15447-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Don Zickus <dzickus@redhat.com>
2011-01-05 14:22:57 +01:00
Don Zickus
9ab181fa9f x86: Only call smp_processor_id in non-preempt cases
There are some paths that walk the die_chain with preemption on.
Make sure we are in an NMI call before we start doing anything.

This was triggered by do_general_protection calling notify_die
with DIE_GPF.

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:22:57 +01:00
Ingo Molnar
aef1b9cef7 Merge commit 'v2.6.37' into perf/core
Merge reason: Add the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:22:10 +01:00
Yinghai Lu
cb2ded37fd x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.

It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.

phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.

The variable after phys_cpu_present_map may get corrupted
silently:

 ffffffff828e8420 B phys_cpu_present_map
 ffffffff828e8440 B apic_verbosity
 ffffffff828e8444 B local_apic_timer_c2_ok
 ffffffff828e8448 B disable_apic
 ffffffff828e844c B x2apic_mode
 ffffffff828e8450 B x2apic_disabled
 ffffffff828e8454 B num_processors
 ...

Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.

For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:

	text		data		bss		dec		filename
	21696943	4193748		12787712	38678403	vmlinux.before
	21696943	4193748		12791808	38682499	vmlinux.after

No change on 32bit.

Finally we can remove MAX_APCIS that was rather confusing.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:09:23 +01:00
Rusty Russell
d50d8fe192 x86, mm: Initialize initial_page_table before paravirt jumps
v2.6.36-rc8-54-gb40827f (x86-32, mm: Add an initial page table
for core bootstrapping) made x86 boot using initial_page_table
and broke lguest.

For 2.6.37 we simply cut & paste the initialization code into
lguest (da32dac101 "lguest: populate initial_page_table"), now
we fix it properly by doing that initialization before the
paravirt jump.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: lguest <lguest@ozlabs.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <201101041720.54535.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04 09:53:50 +01:00
Ingo Molnar
bc030d6cb9 Merge commit 'v2.6.37-rc8' into x86/apic
Conflicts:
	arch/x86/include/asm/io_apic.h

Merge reason: move to a fresh -rc, resolve the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04 09:43:42 +01:00
Thomas Renninger
25e41933b5 perf: Clean up power events by introducing new, more generic ones
Add these new power trace events:

 power:cpu_idle
 power:cpu_frequency
 power:machine_suspend

The old C-state/idle accounting events:
  power:power_start
  power:power_end

Have now a replacement (but we are still keeping the old
tracepoints for compatibility):

  power:cpu_idle

and
  power:power_frequency

is replaced with:
  power:cpu_frequency

power:machine_suspend is newly introduced.

Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.

the type= field got removed from both, it was never
used and the type is differed by the event type itself.

perf timechart userspace tool gets adjusted in a separate patch.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04 08:16:54 +01:00
Ingo Molnar
cc22219699 Merge commit 'v2.6.37-rc8' into perf/core
Merge reason: pick up latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04 08:08:54 +01:00
Christoph Lameter
357089fca9 x86: udelay: Use this_cpu_read to avoid address calculation
The code will use a segment prefix instead of doing the lookup and
calculation.

Signed-off-by: Christoph Lameter <cl@linux.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-04 06:08:55 +01:00
Cliff Wickman
cfa60917f0 x86, UV, BAU: Extend for more than 16 cpus per socket
Fix a hard-coded limit of a maximum of 16 cpu's per socket.

The UV Broadcast Assist Unit code initializes by scanning the
cpu topology of the system and assigning a master cpu for each
socket and UV hub. That scan had an assumption of a limit of 16
cpus per socket. With Westmere we are going over that limit.
The UV hub hardware will allow up to 32.

If the scan finds the system has gone over that limit it returns
an error and we print a warning and fall back to doing TLB
shootdowns without the BAU.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # .37.x
LKML-Reference: <E1PZol7-0000mM-77@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03 20:35:03 +01:00
R, Durgadoss
9e76a97efd x86, hwmon: Add core threshold notification to therm_throt.c
This patch adds code to therm_throt.c to notify core thermal threshold
events. These thresholds are supported by the IA32_THERM_INTERRUPT register.
The status/log for the same is monitored using the IA32_THERM_STATUS register.
The necessary #defines are in msr-index.h. A call back is added to mce.h, to
further notify the thermal stack, about the threshold events.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
LKML-Reference: <D6D887BA8C9DFF48B5233887EF04654105C1251710@bgsmsx502.gar.corp.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-01-03 08:30:30 -08:00
Robert Richter
c7c25802b3 arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPU
Disable preemption in init_ibs(). The function only checks the
ibs capabilities and sets up pci devices (if necessary). It runs
only on one cpu but operates with the local APIC and some MSRs,
thus it is better to disable preemption.

[    7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483
[    7.034385] caller is setup_APIC_eilvt+0x155/0x180
[    7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1
[    7.034392] Call Trace:
[    7.034400]  [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0
[    7.034404]  [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180
[ ... ]

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812

Reported-by: <atswartz@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>         [2.6.37.x]
LKML-Reference: <20110103111514.GM4739@erda.amd.com>
[ small cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03 13:01:40 +01:00
Linus Torvalds
9109f4eb84 Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: i8259: initialize isr_ack
  KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow
2011-01-02 10:44:21 -08:00
Avi Kivity
010c520e20 KVM: Don't reset mmu context unnecessarily when updating EFER
The only bit of EFER that affects the mmu is NX, and this is already
accounted for (LME only takes effect when changing cr0).

Based on a patch by Hillf Danton.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-02 12:05:15 +02:00
Avi Kivity
d0dfc6b74a KVM: i8259: initialize isr_ack
isr_ack is never initialized.  So, until the first PIC reset, interrupts
may fail to be injected.  This can cause Windows XP to fail to boot, as
reported in the fallout from the fix to
https://bugzilla.kernel.org/show_bug.cgi?id=21962.

Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-02 11:52:48 +02:00
Tejun Heo
c1955b5f3a x86: Use this_cpu_inc_return for nmi counter
this_cpu_inc_return() saves us a memory access there.

Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30 12:22:17 +01:00
Tejun Heo
7b543a5334 x86: Replace uses of current_cpu_data with this_cpu ops
Replace all uses of current_cpu_data with this_cpu operations on the
per cpu structure cpu_info.  The scala accesses are replaced with the
matching this_cpu ops which results in smaller and more efficient
code.

In the long run, it might be a good idea to remove cpu_data() macro
too and use per_cpu macro directly.

tj: updated description

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30 12:22:03 +01:00
Tejun Heo
0a3aee0da4 x86: Use this_cpu_ops to optimize code
Go through x86 code and replace __get_cpu_var and get_cpu_var
instances that refer to a scalar and are not used for address
determinations.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30 12:20:28 +01:00
Ingo Molnar
56f4c40034 Merge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core 2010-12-30 11:26:45 +01:00
H. Peter Anvin
d50e8fc7e3 Merge branch 'x86/apic-cleanups' into x86/numa 2010-12-29 11:36:26 -08:00
Avi Kivity
649497d1a3 KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow
We use the physical address instead of the base gfn for the four
PAE page directories we use in unpaged mode.  When the guest accesses
an address above 1GB that is backed by a large host page, a BUG_ON()
in kvm_mmu_set_gfn() triggers.

Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=21962
Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-29 12:35:29 +02:00
Cliff Wickman
c8217b8305 x86, paravirt: Use native_halt on a halt, not native_safe_halt
halt() should use native_halt()
safe_halt() uses native_safe_halt()

If CONFIG_PARAVIRT=y, halt() is defined in arch/x86/include/asm/paravirt.h as

static inline void halt(void)
{
        PVOP_VCALL0(pv_irq_ops.safe_halt);
}

Otherwise (no CONFIG_PARAVIRT) halt() in arch/x86/include/asm/irqflags.h is

static inline void halt(void)
{
        native_halt();
}

So it looks to me like the CONFIG_PARAVIRT case of using native_safe_halt()
for a halt() is an oversight.
Am I missing something?

It probably hasn't shown up as a problem because the local apic is disabled
on a shutdown or restart.  But if we disable interrupts and call halt()
we shouldn't expect that the halt() will re-enable interrupts.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1PSBcz-0001g1-FM@eag09.americas.sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-27 14:02:11 -08:00
Jesper Juhl
5cdd2de0a7 x86/microcode: Fix double vfree() and remove redundant pointer checks before vfree()
In arch/x86/kernel/microcode_intel.c::generic_load_microcode()
we have  this:

	while (leftover) {
		...
		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
		    microcode_sanity_check(mc) < 0) {
			vfree(mc);
			break;
		}
		...
	}

	if (mc)
		vfree(mc);

This will cause a double free of 'mc'. This patch fixes that by
just  removing the vfree() call in the loop since 'mc' will be
freed nicely just  after we break out of the loop.

There's also a second change in the patch. I noticed a lot of
checks for  pointers being NULL before passing them to vfree().
That's completely  redundant since vfree() deals gracefully with
being passed a NULL pointer.  Removing the redundant checks
yields a nice size decrease for the object  file.

Size before the patch:
   text    data     bss     dec     hex filename
   4578     240    1032    5850    16da arch/x86/kernel/microcode_intel.o
Size after the patch:
   text    data     bss     dec     hex filename
   4489     240     984    5713    1651 arch/x86/kernel/microcode_intel.o

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <alpine.LNX.2.00.1012251946100.10759@swampdragon.chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-27 14:33:30 +01:00
Linus Torvalds
79534f237f Merge branches 'perf-fixes-for-linus' and 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Fix to support libdwfl older than 0.148
  perf tools: Fix lazy wildcard matching
  perf buildid-list: Fix error return for success
  perf buildid-cache: Fix symbolic link handling
  perf symbols: Stop using vmlinux files with no symbols
  perf probe: Fix use of kernel image path given by 'k' option

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, kexec: Limit the crashkernel address appropriately
2010-12-23 15:39:40 -08:00
David Rientjes
a387e95a49 x86, numa: Fix cpu to node mapping for sparse node ids
NUMA boot code assumes that physical node ids start at 0, but the DIMMs
that the apic id represents may not be reachable.  If this is the case,
node 0 is never online and cpus never end up getting appropriately
assigned to a node.  This causes the cpumask of all online nodes to be
empty and machines crash with kernel code assuming online nodes have
valid cpus.

The fix is to appropriately map all the address ranges for physical nodes
and ensure the cpu to node mapping function checks all possible nodes (up
to MAX_NUMNODES) instead of simply checking nodes 0-N, where N is the
number of physical nodes, for valid address ranges.

This requires no longer "compressing" the address ranges of nodes in the
physical node map from 0-N, but rather leave indices in physnodes[] to
represent the actual node id of the physical node.  Accordingly, the
topology exported by both amd_get_nodes() and acpi_get_nodes() no longer
must return the number of nodes to iterate through; all such iterations
will now be to MAX_NUMNODES.

This change also passes the end address of system RAM (which may be
different from normal operation if mem= is specified on the command line)
before the physnodes[] array is populated.  ACPI parsed nodes are
truncated to fit within the address range that respect the mem=
boundaries and even some physical nodes may become unreachable in such
cases.

When NUMA emulation does succeed, any apicid to node mapping that exists
for unreachable nodes are given default values so that proximity domains
can still be assigned.  This is important for node_distance() to
function as desired.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221702090.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 15:27:16 -08:00
David Rientjes
c1c3443c9c x86, numa: Fake node-to-cpumask for NUMA emulation
It's necessary to fake the node-to-cpumask mapping so that an emulated
node ID returns a cpumask that includes all cpus that have affinity to
the memory it represents.

This is a little intrusive because it requires knowledge of the physical
topology of the system.  setup_physnodes() gives us that information, but
since NUMA emulation ends up altering the physnodes array, it's necessary
to reset it before cpus are brought online.

Accordingly, the physnodes array is moved out of init.data and into
cpuinit.data since it will be needed on cpuup callbacks.

This works regardless of whether numa=fake is used on the command line,
or the setup of the fake node succeeds or fails.  The physnodes array
always contains the physical topology of the machine if CONFIG_NUMA_EMU
is enabled and can be used to setup the correct node-to-cpumask mappings
in all cases since setup_physnodes() is called whenever the array needs
to be repopulated with the correct data.

To fake the actual mappings, numa_add_cpu() and numa_remove_cpu() are
rewritten for CONFIG_NUMA_EMU so that we first find the physical node to
which each cpu has local affinity, then iterate through all online nodes
to find the emulated nodes that have local affinity to that physical
node, and then finally map the cpu to each of those emulated nodes.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701520.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 15:27:15 -08:00
David Rientjes
f51bf3073a x86, numa: Fake apicid and pxm mappings for NUMA emulation
This patch adds the equivalent of acpi_fake_nodes() for AMD Northbridge
platforms.  The goal is to fake the apicid-to-node mappings for NUMA
emulation so the physical topology of the machine is correctly maintained
within the kernel.

This change also fakes proximity domains for both ACPI and k8 code so the
physical distance between emulated nodes is maintained via
node_distance().  This exports the correct distances via
/sys/devices/system/node/.../distance based on the underlying topology.

A new helper function, fake_physnodes(), is introduced to correctly
invoke the correct NUMA code to fake these two mappings based on the
system type.  If there is no underlying NUMA configuration, all cpus are
mapped to node 0 for local distance.

Since acpi_fake_nodes() is no longer called with CONFIG_ACPI_NUMA, it's
prototype can be removed from the header file for such a configuration.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701360.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 15:27:14 -08:00
David Rientjes
4e76f4e67a x86, numa: Avoid compiling NUMA emulation functions without CONFIG_NUMA_EMU
Both acpi_get_nodes() and amd_get_nodes() are only necessary when
CONFIG_NUMA_EMU is enabled, so avoid compiling them when the option is
disabled.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701210.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 15:27:12 -08:00
David Rientjes
34dc9e7496 x86, numa: Reduce minimum fake node size to 32M
This patch changes the minimum fake node size from 64MB to 32MB so it is
possible to test NUMA code at a greater scale on smaller machines
(64 nodes on a 2G machine, 1024 nodes on 32G machine with
CONFIG_NODES_SHIFT=10).

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221700590.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 15:27:10 -08:00
Yinghai Lu
d3bd058826 x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
Recent Intel new system have different order in MADT, aka will list all thread0
at first, then all thread1.
But SRAT table still old order, it will list cpus in one socket all together.

If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed
to put some cpus apic id to node mapping into apicid_to_node[].

for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash...

[    9.106288] Total of 32 processors activated (136190.88 BogoMIPS).
[    9.235021] divide error: 0000 [#1] SMP
[    9.235315] last sysfs file:
[    9.235481] CPU 1
[    9.235592] Modules linked in:
[    9.245398]
[    9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274      /Sun Fire x4800
[    9.265415] RIP: 0010:[<ffffffff81075a8f>]  [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
...
[    9.645938] RIP  [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[    9.665356]  RSP <ffff88103f8d1c40>
[    9.665568] ---[ end trace 2296156d35fdfc87 ]---

So let just parse all cpu entries in SRAT.

Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of
apicid_to_node[].

it fixes following bug too.
https://bugzilla.kernel.org/show_bug.cgi?id=22662

-v2: expand to 32bit according to hpa
   need to add MAX_LOCAL_APIC for 32bit

Reported-and-Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD486.9020704@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 13:16:18 -08:00
Yinghai Lu
56d91f132c x86, acpi: Add MAX_LOCAL_APIC for 32bit
We should use MAX_LOCAL_APIC for max apic ids and MAX_APICS as number
of local apics.

Also apic_version[] array should use MAX_LOCAL_APICs.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD464.2020408@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-23 13:15:53 -08:00
Seth Heasley
9b444b36fe x86/PCI: irq and pci_ids patch for Intel Patsburg
This patch adds an additional LPC Controller DeviceID for the Intel
Patsburg PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:10 -08:00
Ingo Molnar
26e20a108c Merge commit 'v2.6.37-rc7' into x86/security 2010-12-23 09:48:41 +01:00
Don Zickus
4a7863cc2e x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR
The x86 arch has shifted its use of the nmi_watchdog from a
local implementation to the global one provide by
kernel/watchdog.c.  This shift has caused a whole bunch of
compile problems under different config options.  I attempt to
simplify things with the patch below.

In order to simplify things, I had to come to terms with the
meaning of two terms ARCH_HAS_NMI_WATCHDOG and
CONFIG_HARDLOCKUP_DETECTOR.  Basically they mean the same thing,
the former on a local level and the latter on a global level.

With the old x86 nmi watchdog gone, there is no need to rely on
defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't
make sense any more.  x86 will now use the global
implementation.

The changes below do a few things.  First it changes the few
places that relied on ARCH_HAS_NMI_WATCHDOG to use
CONFIG_X86_LOCAL_APIC (the former was an alias for the latter
anyway, so nothing unusual here).  Those pieces of code were
relying more on local apic functionality the nmi watchdog
functionality, so the change should make sense.

Second, I removed the x86 implementation of
touch_nmi_watchdog().  It isn't need now, instead x86 will rely
on kernel/watchdog.c's implementation.

Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from
x86.  And tweaked the include/linux/nmi.h file to tell users to
look for an externally defined touch_nmi_watchdog in the case of
ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This
changes removes some of the ugliness in that file.

Finally, I added a Kconfig dependency for
CONFIG_HARDLOCKUP_DETECTOR that said you can't have
ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR.  You can
only have one nmi_watchdog.

Tested with
ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken
configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig,
(various broken configs)

Hopefully, after this patch I won't get any more compile broken
emails. :-)

v3:
  changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function
  prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 22:15:32 +01:00
Jiri Kosina
4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Jack Steiner
d8850ba425 x86, UV: Fix the effect of extra bits in the hub nodeid register
UV systems can be partitioned into multiple independent SSIs.
Large partitioned systems may have extra bits in the node_id
register. These bits are used when the total memory on all SSIs
exceeds 16TB.  These extra bits need to be ignored when
calculating x2apic_extra_bits.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101130195926.972776133@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 12:31:15 +01:00
Jack Steiner
e681041388 x86, UV: Add common uv_early_read_mmr() function for reading MMRs
Early in boot, reading MMRs from the UV hub controller require
calls to early_ioremap()/early_iounmap().  Rather than
duplicating code, add a common function to do the
map/read/unmap.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101130195926.834804371@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 12:31:15 +01:00
Ingo Molnar
6c529a266b Merge commit 'v2.6.37-rc7' into perf/core
Merge reason: Pick up the latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 11:53:23 +01:00
Linus Torvalds
55ec86f848 Merge branches 'x86-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32: Make sure we can map all of lowmem if we need to
  x86, vt-d: Handle previous faults after enabling fault handling
  x86: Enable the intr-remap fault handling after local APIC setup
  x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode
  x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic
  x86, xsave: Use alloc_bootmem_align() instead of alloc_bootmem()
  bootmem: Add alloc_bootmem_align()
  x86, gcc-4.6: Use gcc -m options when building vdso
  x86: HPET: Chose a paranoid safe value for the ETIME check
  x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix off by one in perf_swevent_init()
  perf: Fix duplicate events with multiple-pmu vs software events
  ftrace: Have recordmcount honor endianness in fn_ELF_R_INFO
  scripts/tags.sh: Add magic for trace-events
  tracing: Fix panic when lseek() called on "trace" opened for writing
2010-12-19 10:44:54 -08:00
Robert Richter
da169f5df2 oprofile, x86: Add support for 6 counters (AMD family 15h)
This patch adds support for up to 6 hardware counters for AMD family
15h cpus. There is a new MSR range for hardware counters beginning at
MSRC001_0200 Performance Event Select (PERF_CTL0).

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-12-19 11:43:08 +01:00
Robert Richter
30570bced1 oprofile, x86: Add support for AMD family 15h
This patch adds support for AMD family 15h (Interlagos/Valencia/
Zambezi) cpus.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-12-19 11:43:04 +01:00
Linus Torvalds
46bdfe6a50 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86: avoid high BIOS area when allocating address space
  x86: avoid E820 regions when allocating address space
  x86: avoid low BIOS area when allocating address space
  resources: add arch hook for preventing allocation in reserved areas
  Revert "resources: support allocating space within a region from the top down"
  Revert "PCI: allocate bus resources from the top down"
  Revert "x86/PCI: allocate space from the end of a region, not the beginning"
  Revert "x86: allocate space within a region top-down"
  Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
  PCI: Update MCP55 quirk to not affect non HyperTransport variants
2010-12-18 10:13:24 -08:00
Tejun Heo
05c2d088d0 Merge branch 'this_cpu_ops' into for-2.6.38 2010-12-18 15:54:36 +01:00
Christoph Lameter
8270137a0d cpuops: Use cmpxchg for xchg to avoid lock semantics
Use cmpxchg instead of xchg to realize this_cpu_xchg.

xchg will cause LOCK overhead since LOCK is always implied but cmpxchg
will not.

Baselines:

xchg()		= 18 cycles (no segment prefix, LOCK semantics)
__this_cpu_xchg = 1 cycle

(simulated using this_cpu_read/write, two prefixes. Looks like the
cpu can use loop optimization to get rid of most of the overhead)

Cycles before:

this_cpu_xchg	 = 37 cycles (segment prefix and LOCK (implied by xchg))

After:

this_cpu_xchg	= 11 cycle (using cmpxchg without lock semantics)

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-18 15:54:04 +01:00
Christoph Lameter
7296e08aba x86: this_cpu_cmpxchg and this_cpu_xchg operations
Provide support as far as the hardware capabilities of the x86 cpus
allow.

Define CONFIG_CMPXCHG_LOCAL in Kconfig.cpu to allow core code to test for
fast cpuops implementations.

V1->V2:
	- Take out the definition for this_cpu_cmpxchg_8 and move it into
	  a separate patch.

tj: - Reordered ops to better follow this_cpu_* organization.
    - Renamed macro temp variables similar to their existing
      neighbours.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-18 15:54:04 +01:00
H. Peter Anvin
7f8595bfac x86, kexec: Limit the crashkernel address appropriately
Keep the crash kernel address below 512 MiB for 32 bits and 896 MiB
for 64 bits.  For 32 bits, this retains compatibility with earlier
kernel releases, and makes it work even if the vmalloc= setting is
adjusted.

For 64 bits, we should be able to increase this substantially once a
hard-coded limit in kexec-tools is fixed.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101217195035.GE14502@redhat.com>
2010-12-17 15:04:00 -08:00
Bjorn Helgaas
a2c606d53a x86: avoid high BIOS area when allocating address space
This prevents allocation of the last 2MB before 4GB.

The experiment described here shows Windows 7 ignoring the last 1MB:
https://bugzilla.kernel.org/show_bug.cgi?id=23542#c27

This patch ignores the top 2MB instead of just 1MB because H. Peter Anvin
says "There will be ROM at the top of the 32-bit address space; it's a fact
of the architecture, and on at least older systems it was common to have a
shadow 1 MiB below."

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:01:30 -08:00
Bjorn Helgaas
4dc2287c18 x86: avoid E820 regions when allocating address space
When we allocate address space, e.g., to assign it to a PCI device, don't
allocate anything mentioned in the BIOS E820 memory map.

On recent machines (2008 and newer), we assign PCI resources from the
windows described by the ACPI PCI host bridge _CRS.  On many Dell
machines, these windows overlap some E820 reserved areas, e.g.,

    BIOS-e820: 00000000bfe4dc00 - 00000000c0000000 (reserved)
    pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff]

If we put devices at 0xbff00000, they don't work, probably because
that's really RAM, not I/O memory.  This patch prevents that by removing
the 0xbfe4dc00-0xbfffffff area from the "available" resource.

I'm not very happy with this solution because Windows solves the problem
differently (it seems to ignore E820 reserved areas and it allocates
top-down instead of bottom-up; details at comment 45 of the bugzilla
below).  That means we're vulnerable to BIOS defects that Windows would not
trip over.  For example, if BIOS described a device in ACPI but didn't
mention it in E820, Windows would work fine but Linux would fail.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:01:24 -08:00
Bjorn Helgaas
30919b0bf3 x86: avoid low BIOS area when allocating address space
This implements arch_remove_reservations() so allocate_resource() can
avoid any arch-specific reserved areas.  This currently just avoids the
BIOS area (the first 1MB), but could be used for E820 reserved areas if
that turns out to be necessary.

We previously avoided this area in pcibios_align_resource().  This patch
moves the test from that PCI-specific path to a generic path, so *all*
resource allocations will avoid this area.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:01:17 -08:00
Bjorn Helgaas
d14125ecfe Revert "x86/PCI: allocate space from the end of a region, not the beginning"
This reverts commit dc9887dc02.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:00:49 -08:00
Bjorn Helgaas
5e52f1c5e8 Revert "x86: allocate space within a region top-down"
This reverts commit 1af3c2e45e.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:00:43 -08:00
Linus Torvalds
a6ac1f0af4 Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Fix preemption counter leak in kvm_timer_init()
  KVM: enlarge number of possible CPUID leaves
  KVM: SVM: Do not report xsave in supported cpuid
  KVM: Fix OSXSAVE after migration
2010-12-17 09:32:39 -08:00
Tejun Heo
403047754c percpu,x86: relocate this_cpu_add_return() and friends
- include/linux/percpu.h: this_cpu_add_return() and friends were
  located next to __this_cpu_add_return().  However, the overall
  organization is to first group by preemption safeness.  Relocate
  this_cpu_add_return() and friends to preemption-safe area.

- arch/x86/include/asm/percpu.h: Relocate percpu_add_return_op() after
  other more basic operations.  Relocate [__]this_cpu_add_return_8()
  so that they're first grouped by preemption safeness.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
2010-12-17 16:13:22 +01:00
Tejun Heo
275c8b9328 Merge branch 'this_cpu_ops' into for-2.6.38 2010-12-17 15:16:46 +01:00
Christoph Lameter
8f1d97c79e x86: Support for this_cpu_add, sub, dec, inc_return
Supply an implementation for x86 in order to generate more efficient code.

V2->V3:
	- Cleanup
	- Remove strange type checking from percpu_add_return_op.

tj: - Dropped unused typedef from percpu_add_return_op().
    - Renamed ret__ to paro_ret__ in percpu_add_return_op().
    - Minor indentation adjustments.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:15:28 +01:00
Christoph Lameter
780f36d8b3 xen: Use this_cpu_ops
Use this_cpu_ops to reduce code size and simplify things in various places.

V3->V4:
	Move instance of this_cpu_inc_return to a later patchset so that
	this patch can be applied without infrastructure changes.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Christoph Lameter
b76834bc1b kprobes: Use this_cpu_ops
Use this_cpu ops in various places to optimize per cpu data access.

Cc: Jason Baron <jbaron@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
H. Peter Anvin
147dd5610c x86-32: Make sure we can map all of lowmem if we need to
A relocatable kernel can be anywhere in lowmem -- and in the case of a
kdump kernel, is likely to be fairly high.  Since the early page
tables map everything from address zero up we need to make sure we
allocate enough brk that we can map all of lowmem if we need to.

Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD3ED.8070607@kernel.org>
2010-12-16 19:11:09 -08:00
Avi Kivity
3e26f23091 KVM: Fix preemption counter leak in kvm_timer_init()
Based on a patch from Thomas Meyer.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-16 12:39:31 +02:00
Peter Zijlstra
7639dae0ca perf, x86: Provide a PEBS capable cycle event
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16 11:36:44 +01:00
Peter Zijlstra
2e80a82a49 perf: Dynamic pmu types
Extend the perf_pmu_register() interface to allow for named and
dynamic pmu types.

Because we need to support the existing static types we cannot use
dynamic types for everything, hence provide a type argument.

If we want to enumerate the PMUs they need a name, provide one.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.259707703@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16 11:36:43 +01:00
Peter Zijlstra
4407204c5c perf, x86: Detect broken BIOSes that corrupt the PMU
Some BIOSes use PMU resources, which can cause various bugs:

 - Non-working or erratic PMU based statistics - the PMU can end up
   counting the wrong thing, resulting in misleading statistics

 - Profiling can stop working or it can profile the wrong thing

 - A non-working or erratic NMI watchdog that cannot be relied on

 - The kernel may disturb whatever thing the BIOS tries to use the
   PMU for - possibly causing hardware malfunction in extreme cases.

 - ... and other forms of potential misbehavior

Various forms of such misbehavior has been observed in practice - there are
BIOSes that just corrupt the PMU state, consequences be damned.

The PMU is a CPU resource that is handled by the kernel and the BIOS
stealing+corrupting it is not acceptable nor robust, so we detect it,
warn about it and further refuse to touch the PMU ourselves.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16 11:36:42 +01:00
Ingo Molnar
006b20fe4c Merge branch 'perf/urgent' into perf/core
Merge reason: We want to apply a dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16 11:22:27 +01:00
Rusty Russell
da32dac101 lguest: populate initial_page_table
Two x86 patches broke lguest:
1) v2.6.35-492-g72d7c3b, which changed x86 to use the memblock allocator.

In lguest, the host places linear page tables at the top of mem, which
used to be enough to get us up to the swapper_pg_dir page tables.  With
the first patch, the direct mapping tables used that memory:

Before: kernel direct mapping tables up to 4000000 @ 7000-1a000
After: kernel direct mapping tables up to 4000000 @ 3fed000-4000000

I initially fixed this by lying about the amount of memory we had, so
the kernel wouldn't blatt the lguest boot pagetables (yuk!), but then...

2) v2.6.36-rc8-54-gb40827f, which made x86 boot use initial_page_table.

This was initialized in a part of head_32.S which isn't executed by
lguest; it is then copied into swapper_pg_dir.  So we have to initialize
it; and anyway we switch to it before we blatt the old tables, so that
fixes the previous damage as well.

For the moment, I cut & pasted the code into lguest's boot code, but
next merge window I will merge them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: x86@kernel.org
2010-12-16 17:03:15 +10:30
Rusty Russell
bb4093deb2 lguest: restore boot speed
lguest is dumb and drops *all* the pagetables for set_pte (which is
only used for kernel mapping manipulation, so it's OK without highmem).

But it's used a lot in boot, too.  As a guest optimization, we
suppressed this flushing until the first page switch.  Now we have
initial_page_table, that happens much earlier, so extend the heuristic
to wait until we switch to something other than the swapper_pg_dir or
initial_page_table.

As measured on my laptop under kvm, this dropped the time-to-mount-root
from 48 seconds to 4.3 seconds.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-12-16 17:03:15 +10:30
Rusty Russell
bb6f1d9a99 lguest: fix crash lguest_time_init
fe25c7fc2e "x86: lguest: Convert to new irq chip functions" converted
enable_lguest_irq() to take a struct irq_data *, but didn't fix the one
internal caller.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To: x86@kernel.org
2010-12-16 17:03:14 +10:30
Andres Salomon
b5318d302f x86, olpc: Speed up device tree creation during boot
Calling alloc_bootmem() for tiny chunks of memory over and over is really
slow; on an XO-1, it caused the time between when the kernel started
booting and when the display came alive (post-lxfb probe) to increase
to 44s.  This patch optimizes the prom_early_alloc function by
calling alloc_bootmem for 4k-sized blocks of memory, and handing out
chunks of that to callers.  With this patch, the time between kernel load
and display initialization decreased to 23s.  If there's a better way to
do this early in the boot process, please let me know.

(Note: increasing the chunk size to 16k didn't noticably affect boot time,
and wasted 9k.)

v4: clarify comment, requested by hpa
v3: fix wasted memory buglet found by Milton Miller, and style fix.
v2: reorder prom_early_alloc as suggested by Grant.

Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101129153951.74202a84@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-15 17:11:40 -08:00
Andres Salomon
c10d1e260f x86, olpc: Add OLPC device-tree support
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to
call into OLPC's Open Firmware to build the tree.

v5: fix buglet with root node check (introduced in v4)

v4: address some minor style issues pointed out by Grant, and explicitly cast
    negative phandle checks to s32.

v3: rename olpc_prom to olpc_dt
  - rework Kconfig entries
  - drop devtree build hook from proc, instead adding a call to x86's
    paging_init (similarly to how sparc64 does it)
  - switch allocation from using slab to alloc_bootmem.  this allows
    the DT to be built earlier during boot (during setup_arch); the
    downside is that there are some 1200 bootmem reservations that are
    done during boot.  Not ideal..
  - add a helper olpc_ofw_is_installed function to test for the
    existence and successful detection of OLPC's OFW.

Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101116220952.26526a80@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-15 17:11:30 -08:00
Andres Salomon
4722d194e6 x86, of: Define irq functions to allow drivers/of/* to build on x86
- Define a stub irq_create_of_mapping for x86 as a stop-gap solution until
   drivers/of/irq is further along.
 - Define irq_dispose_mapping for x86 to appease of_i2c.c

These are needed to allow stuff in drivers/of/ to build on x86.  This stuff
will eventually get replaced; quoting Grant,

"The long term plan is to have the drivers/of/ code handling the mapping
intelligently like powerpc currently does."  But for now, just provide
these functions.

Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101111214526.5de7121b@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-15 17:11:16 -08:00
Randy Dunlap
52f6c5ad43 crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h
Add missing header file:

arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR'
arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-15 19:44:08 +08:00
Kenji Kaneshige
7f7fbf45c6 x86: Enable the intr-remap fault handling after local APIC setup
Interrupt-remapping gets enabled very early in the boot, as it determines the
apic mode that the processor can use. And the current code enables the vt-d
fault handling before the setup_local_APIC(). And hence the APIC LDR registers
and data structure in the memory may not be initialized. So the vt-d fault
handling in logical xapic/x2apic modes were broken.

Fix this by enabling the vt-d fault handling in the end_local_APIC_setup()

A cleaner fix of enabling fault handling while enabling intr-remapping
will be addressed for v2.6.38. [ Enabling intr-remapping determines the
usage of x2apic mode and the apic mode determines the fault-handling
configuration. ]

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <20101201062244.541996375@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org [v2.6.32+]
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-13 16:53:32 -08:00
Kenji Kaneshige
086e8ced65 x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode
In x2apic mode, we need to set the upper address register of the fault
handling interrupt register of the vt-d hardware. Without this
irq migration of the vt-d fault handling interrupt is broken.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <1291225233.2648.39.camel@sbsiddha-MOBL3>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org [v2.6.32+]
Acked-by: Chris Wright <chrisw@sous-sol.org>
Tested-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-13 16:52:52 -08:00
Suresh Siddha
3fb82d56ad x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume
During suspend, we disable all the non boot cpus. And during resume we bring
them all back again. So no need to do alternatives_smp_switch() in between.

On my core 2 based laptop, this speeds up the suspend path by 15msec and the
resume path by 5 msec (suspend/resume speed up differences can be attributed
to the different P-states that the cpu is in during suspend/resume).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1290557500.4946.8.camel@sbsiddha-MOBL3.sc.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-13 16:23:56 -08:00
Suresh Siddha
10340ae130 x86, xsave: Use alloc_bootmem_align() instead of alloc_bootmem()
Alignment of alloc_bootmem() depends on the value of
L1_CACHE_SHIFT. What we need here, however, is 64 byte alignment.  Use
alloc_bootmem_align() and explicitly specify the alignment instead.

This fixes a kernel boot crash reported by Jody when the cpu in .config
is set to MPENTIUMII but the kernel is booted on a xsave-capable CPU.

Reported-by: Jody Bruchon <jody@nctritech.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20101116212442.059967454@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org>
2010-12-13 16:13:11 -08:00
H. Peter Anvin
de2a8cf98e x86, gcc-4.6: Use gcc -m options when building vdso
The vdso Makefile passes linker-style -m options not to the linker but
to gcc.  This happens to work with earlier gcc, but fails with gcc
4.6.  Pass gcc-style -m options, instead.

Note: all currently supported versions of gcc supports -m32, so there
is no reason to conditionalize it any more.

Reported-by: H. J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-*@git.kernel.org>
Cc: <stable@kernel.org>
2010-12-13 16:08:37 -08:00
Don Zickus
5f29805a4f x86, watchdog: Compile fix when CONFIG_LOCAL_APIC not enabled
When adjusting the code to handle removing the old nmi watchdog,
I forgot to consider the compile case when the local apic is not
enabled.

This change fixes the following build error:

  arch/x86/kernel/apic/hw_nmi.c:28:6: error: redefinition of ‘touch_nmi_watchdog’

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Rakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <20101213153719.GD18577@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-13 18:23:23 +01:00
Thomas Gleixner
f1c18071ad x86: HPET: Chose a paranoid safe value for the ETIME check
commit 995bd3bb5 (x86: Hpet: Avoid the comparator readback penalty)
chose 8 HPET cycles as a safe value for the ETIME check, as we had the
confirmation that the posted write to the comparator register is
delayed by two HPET clock cycles on Intel chipsets which showed
readback problems.

After that patch hit mainline we got reports from machines with newer
AMD chipsets which seem to have an even longer delay. See
http://thread.gmane.org/gmane.linux.kernel/1054283 and
http://thread.gmane.org/gmane.linux.kernel/1069458 for further
information.

Boris tried to come up with an ACPI based selection of the minimum
HPET cycles, but this failed on a couple of test machines. And of
course we did not get any useful information from the hardware folks.

For now our only option is to chose a paranoid high and safe value for
the minimum HPET cycles used by the ETIME check. Adjust the minimum ns
value for the HPET clockevent accordingly.

Reported-Bistected-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1012131222420.2653@localhost6.localdomain6>
Cc: Simon Kirby <sim@hostway.ca>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com>
Cc: John Stultz <johnstul@us.ibm.com>
2010-12-13 13:42:44 +01:00
Tadeusz Struk
3c097b8008 crypto: aesni-intel - Fixed build with binutils 2.16
This patch fixes the problem with 2.16 binutils.

Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com>
Signed-off-by: Adrian Hoban <adrian.hoban@intel.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-13 19:51:15 +08:00
Thomas Gleixner
a8760eca6c x86: Check tsc available/disabled in the delayed init function
The delayed TSC init function does not check whether the system has no
TSC or TSC is disabled at the kernel command line, which results in a
crash in the work queue based extended calibration due to division by
zero because the basic calibration never happened.

Add the missing checks and do not touch TSC when not available or
disabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
2010-12-13 11:35:05 +01:00
Tejun Heo
0aa002fe60 x86: apic: Cleanup and simplify setup_local_APIC()
setup_local_APIC() is used to setup local APIC early during CPU
initialization and already assumes that preemption is disabled on
entry. However, The function unnecessarily disables and enables
preemption and uses smp_processor_id() multiple times in and out of
the nested preemption disabled section. This gives the wrong
impression that the function might be able to handle being called with
preemption enabled and/or migrated to another processor in the middle.

Make it clear that the function is always called with preemption
disabled, drop the confusing preemption disable block and call
smp_processor_id() once at the beginning of the function.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: brgerst@gmail.com
LKML-Reference: <4D00B3B9.7060702@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-10 13:46:26 +01:00
Don Zickus
5dc3055879 x86, NMI: Add back unknown_nmi_panic and nmi_watchdog sysctls
Originally adapted from Huang Ying's patch which moved the
unknown_nmi_panic to the traps.c file.  Because the old nmi
watchdog was deleted before this change happened, the
unknown_nmi_panic sysctl was lost.  This re-adds it.

Also, the nmi_watchdog sysctl was re-implemented and its
documentation updated accordingly.

Patch-inspired-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1291068437-5331-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10 00:01:06 +01:00
Don Zickus
96a84c20d6 lockup detector: Compile fixes from removing the old x86 nmi watchdog
My patch that removed the old x86 nmi watchdog broke other
arches.  This change reverts a piece of that patch and puts the
change in the correct spot.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: fweisbec@gmail.com
Cc: yinghai@kernel.org
LKML-Reference: <1291068437-5331-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10 00:01:06 +01:00
Feng Tang
0e3fa13f4e x86: Further simplify mp_irq info handling
assign_to_mp_irq() is copying the struct mpc_intsrc members one by
one. That's silly. Use memcpy() and let the compiler figure it out.
Same for the identical function assign_to_mpc_intsrc()

mp_irq_mpc_intsrc_cmp() is comparing the struct members one by one,
but no caller ever checks the different return codes. Use memcmp()
instead.

Remove the extra printk in MP_ioapic_info()

Signed-off-by: Feng Tang <feng.tang@linux.intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <20101208151857.212f0018@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:06 +01:00
Feng Tang
2d8009ba67 x86: Unify 3 similar ways of saving mp_irqs info
There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.

Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:06 +01:00
Yinghai Lu
60d79fd99f x86, ioapic: Avoid writing io_apic id if already correct
For 32bit mptable path, setup_ids_from_mpc() always writes the io_apic
id register, even there is no change needed.

Skip the write, when readout and mptable match.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
LKML-Reference: <4CFDF785.7010401@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:05 +01:00
Yinghai Lu
0450193bff x86, x2apic: Don't map lapic addr for preenabled x2apic systems
If x2apic is preenabled and used by the kernel, we don't need to map
the lapic address. That mapping will never be used.

So just skip that in register_lapic_address()

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF69C.9070501@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:05 +01:00
Yinghai Lu
53301f36f3 x86, sfi: Use register_lapic_address()
register_lapic_address() and mp_sfi_register_lapic_address() are
almost identical. Use the common function.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF693.6000908@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:05 +01:00
Yinghai Lu
326a2e6bae x86, apic: Use register_lapic_address() in init_apic_mapping()
Remove the printk as well, we don't want to print when nothing
changed. We print in register_lapic_address() already.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF68A.7020902@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:05 +01:00
Yinghai Lu
f115714163 x86, apic: Remove early_init_lapic_mapping()
It is almost the same as smp_register_lapic_addr(). We just need to
let smp_read_mpc() call smp_register_lapic_addr() when early==1.

Add the apic_printk to smp_register_lapic_address()

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF681.3030509@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:04 +01:00
Yinghai Lu
c0104d38a7 x86, apic: Unify identical register_lapic_address() functions
They are the same, move the common function to apic.c to allow
further cleanups.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF675.4060305@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:04 +01:00
Thomas Gleixner
51ddafcbc7 Merge branch 'x86/platform' into x86/apic-cleanups
Reason: apic cleanup series depends on x86/apic, x86/amd-nb and x86/platform

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 18:19:21 +01:00
Thomas Gleixner
d834a9dcec Merge branch 'x86/amd-nb' into x86/apic-cleanups
Reason: apic cleanup series depends on x86/apic, x86/amd-nb x86/platform

Conflicts:
	arch/x86/include/asm/io_apic.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 18:17:25 +01:00
Thomas Gleixner
4720dd1b38 x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n
arch/x86/kernel/apic/io_apic.c: In function 'ack_apic_level':
arch/x86/kernel/apic/io_apic.c:2433: warning: unused variable 'desc'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <201010272107.o9RL7rse018212@imap1.linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 17:43:21 +01:00
Rakib Mullick
2c6cb1053a x86: Address 'unused' warning in hw_nmi.c again
arch/x86/kernel/apic/hw_nmi.c:29: warning: backtrace_mask defined but not used

commit 0e2af2a9(x86, hw_nmi: Move backtrace_mask declaration under
ARCH_HAS_NMI_WATCHDOG) addressed this warning, but it was reintroduced
by commit 5f2b0ba4(x86, nmi_watchdog: Remove the old nmi_watchdog).

Move backtrace_mask into the #ifdef arch_trigger_all_cpu_backtrace
section again.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <AANLkTi=rcc38QzoKa6LFy4m++-p_9=Zt4_kDQE=GeKxf@mail.gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 16:06:52 +01:00
Peter Zijlstra
c079c791c5 perf, amd: Remove the nb lock
Since all the hotplug stuff is serialized by the hotplug mutex,
do away with the amd_nb_lock.

Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-08 20:16:30 +01:00
Andre Przywara
73c1160ce3 KVM: enlarge number of possible CPUID leaves
Currently the number of CPUID leaves KVM handles is limited to 40.
My desktop machine (AthlonII) already has 35 and future CPUs will
expand this well beyond the limit. Extend the limit to 80 to make
room for future processors.

KVM-Stable-Tag.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-08 17:28:38 +02:00
Joerg Roedel
24d1b15f72 KVM: SVM: Do not report xsave in supported cpuid
To support xsave properly for the guest the SVM module need
software support for it. As long as this is not present do
not report the xsave as supported feature in cpuid.
As a side-effect this patch moves the bit() helper function
into the x86.h file so that it can be used in svm.c too.

KVM-Stable-Tag.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-08 17:28:37 +02:00
Sheng Yang
3ea3aa8cf6 KVM: Fix OSXSAVE after migration
CPUID's OSXSAVE is a mirror of CR4.OSXSAVE bit. We need to update the CPUID
after migration.

KVM-Stable-Tag.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-08 17:28:31 +02:00
Linus Torvalds
6313e3c217 Merge branches 'x86-fixes-for-linus', 'perf-fixes-for-linus' and 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/pvclock: Zero last_value on resume

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf record: Fix eternal wait for stillborn child
  perf header: Don't assume there's no attr info if no sample ids is provided
  perf symbols: Figure out start address of kernel map from kallsyms
  perf symbols: Fix kallsyms kernel/module map splitting

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  nohz: Fix printk_needs_cpu() return value on offline cpus
  printk: Fix wake_up_klogd() vs cpu hotplug
2010-12-08 06:40:59 -08:00
Ingo Molnar
10a18d7dc0 Merge commit 'v2.6.37-rc5' into perf/core
Merge reason: Pick up the latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-07 07:49:51 +01:00
Feng Tang
991cfffa7c x86, earlyprintk: Move mrst early console to platform/ and fix a typo
Move the code to arch/x86/platform/mrst/. Also fix a typo to use
the correct config option: ONFIG_EARLY_PRINTK_MRST

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: alan@linux.intel.com
LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06 20:52:04 +01:00
Masami Hiramatsu
f984ba4eb5 kprobes: Use text_poke_smp_batch for unoptimizing
Use text_poke_smp_batch() on unoptimization path for reducing
the number of stop_machine() issues. If the number of
unoptimizing probes is more than MAX_OPTIMIZE_PROBES(=256),
kprobes unoptimizes first MAX_OPTIMIZE_PROBES probes and kicks
optimizer for remaining probes.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20101203095434.2961.22657.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-06 17:59:32 +01:00
Masami Hiramatsu
cd7ebe2298 kprobes: Use text_poke_smp_batch for optimizing
Use text_poke_smp_batch() in optimization path for reducing
the number of stop_machine() issues. If the number of optimizing
probes is more than MAX_OPTIMIZE_PROBES(=256), kprobes optimizes
first MAX_OPTIMIZE_PROBES probes and kicks optimizer for
remaining probes.

Changes in v5:
- Use kick_kprobe_optimizer() instead of directly calling
  schedule_delayed_work().
- Rescheduling optimizer outside of kprobe mutex lock.

Changes in v2:
- Allocate code buffer and parameters in arch_init_kprobes()
  instead of using static arraies.
- Merge previous max optimization limit patch into this patch.
  So, this patch introduces upper limit of optimization at
  once.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20101203095428.2961.8994.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-06 17:59:31 +01:00
Masami Hiramatsu
7deb18dcf0 x86: Introduce text_poke_smp_batch() for batch-code modifying
Introduce text_poke_smp_batch(). This function modifies several
text areas with one stop_machine() on SMP. Because calling
stop_machine() is heavy task, it is better to aggregate
text_poke requests.

( Note: I've talked with Rusty about this interface, and
  he would not like to expand stop_machine() interface, since
  it is not for generic use. )

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095422.2961.51217.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-06 17:59:31 +01:00
Masami Hiramatsu
6274de4984 kprobes: Support delayed unoptimizing
Unoptimization occurs when a probe is unregistered or disabled,
and is heavy because it recovers instructions by using
stop_machine(). This patch delays unoptimization operations and
unoptimize several probes at once by using
text_poke_smp_batch(). This can avoid unexpected system slowdown
coming from stop_machine().

Changes in v5:
- Split this patch into several cleanup patches and this patch.
- Fix some text_mutex lock miss.
- Use bool instead of int for behavior flags.
- Add additional comment for (un)optimizing path.

Changes in v2:
- Use dynamic allocated buffers and params.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095409.2961.82733.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-06 17:59:30 +01:00
Feng Tang
e4d2ebcab1 x86, apbt: Setup affinity for apb timers acting as per-cpu timer
Commit a5ef2e70 "x86: Sanitize apb timer interrupt handling" forgot
the affinity setup when cleaning up the code, this patch just
adds the forgotten part

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
LKML-Reference: <1291348298-21263-2-git-send-email-feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06 15:58:26 +01:00
Dirk Brandewie
5ec6960f6f ce4100: Add errata fixes for UART on CE4100
This patch enables the UART on the CE4100. The UART has a couple of
issues that need to be worked around. First the UART is mostly PC
compatible except that it is clocked eight times faster than a
standard PC so the default configuration provided in
arch/x86/include/asm/serial.h needs to be overridden. Second the TX
interrupt may not be set correctly all the time. Lastly accessing the
UART via I/O space for early_prink() hangs the chip when the IOAPIC is
enabled.

A custom mem_serial_in() is provided to work around the TX interrupt
issue. The configuration issues are dealt with in the call back
registered with the 8250 driver via serial8250_set_isa_configurator()

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06 15:58:26 +01:00
Sebastian Andrzej Siewior
a38c5380ef x86: io_apic: Split setup_ioapic_ids_from_mpc()
Sodaville needs to setup the IO_APIC ids as the boot loader leaves
them uninitialized. Split out the setter function so it can be called
unconditionally from the sodaville board code.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101126165020.GA26361@www.tglx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06 14:30:28 +01:00
Linus Torvalds
11e8896474 Merge branch '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: unplug the emulated devices at resume time
  xen: fix save/restore for PV on HVM guests with pirq remapping
  xen: resume the pv console for hvm guests too
  xen: fix MSI setup and teardown for PV on HVM guests
  xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
2010-12-03 11:30:57 -08:00
Linus Torvalds
8338fded13 Merge branches 'upstream/core' and 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: allocate irq descs on any NUMA node
  xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory
  xen: use default_idle
  xen: clean up "extra" memory handling some more

* 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: x86/32: perform initial startup on initial_page_table
  xen: don't bother to stop other cpus on shutdown/reboot
2010-12-03 10:08:52 -08:00
John Stultz
08ec0c58fb x86: Improve TSC calibration using a delayed workqueue
Boot to boot the TSC calibration may vary by quite a large amount.

While normal variance of 50-100ppm can easily be seen, the quick
calibration code only requires 500ppm accuracy, which is the limit
of what NTP can correct for.

This can cause problems for systems being used as NTP servers, as
every time they reboot it can take hours for them to calculate the
new drift error caused by the calibration.

The classic trade-off here is calibration accuracy vs slow boot times,
as during the calibration nothing else can run.

This patch uses a delayed workqueue  to calibrate the TSC over the
period of a second. This allows very accurate calibration (in my
tests only varying by 1khz or 0.4ppm boot to boot). Additionally this
refined calibration step does not block the boot process, and only
delays the TSC clocksoure registration by a few seconds in early boot.
If the refined calibration strays 1% from the early boot calibration
value, the system will fall back to already calculated early boot
calibration.

Credit to Andi Kleen who suggested using a timer quite awhile back,
but I dismissed it thinking the timer calibration would be done after
the clocksource was registered (which would break things). Forgive
me for my short-sightedness.

This patch has worked very well in my testing, but TSC hardware is
quite varied so it would probably be good to get some extended
testing, possibly pushing inclusion out to 2.6.39.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1289003985-29060-1-git-send-email-johnstul@us.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@elte.hu>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Clark Williams <williams@redhat.com>
CC: Andi Kleen <andi@firstfloor.org>
2010-12-02 16:48:37 -08:00
John Stultz
b0f969009f Merge remote branch 'tip/x86/tsc' into fortglx/2.6.38/tip/x86/tsc
Conflicts:
	Documentation/kernel-parameters.txt
2010-12-02 16:47:52 -08:00
Jeremy Fitzhardinge
64141da587 vmalloc: eagerly clear ptes on vunmap
On stock 2.6.37-rc4, running:

  # mount lilith:/export /mnt/lilith
  # find  /mnt/lilith/ -type f -print0 | xargs -0 file

crashes the machine fairly quickly under Xen.  Often it results in oops
messages, but the couple of times I tried just now, it just hung quietly
and made Xen print some rude messages:

    (XEN) mm.c:2389:d80 Bad type (saw 7400000000000001 != exp
    3000000000000000) for mfn 1d7058 (pfn 18fa7)
    (XEN) mm.c:964:d80 Attempt to create linear p.t. with write perms
    (XEN) mm.c:2389:d80 Bad type (saw 7400000000000010 != exp
    1000000000000000) for mfn 1d2e04 (pfn 1d1fb)
    (XEN) mm.c:2965:d80 Error while pinning mfn 1d2e04

Which means the domain tried to map a pagetable page RW, which would
allow it to map arbitrary memory, so Xen stopped it.  This is because
vm_unmap_ram() left some pages mapped in the vmalloc area after NFS had
finished with them, and those pages got recycled as pagetable pages
while still having these RW aliases.

Removing those mappings immediately removes the Xen-visible aliases, and
so it has no problem with those pages being reused as pagetable pages.
Deferring the TLB flush doesn't upset Xen because it can flush the TLB
itself as needed to maintain its invariants.

When unmapping a region in the vmalloc space, clear the ptes
immediately.  There's no point in deferring this because there's no
amortization benefit.

The TLBs are left dirty, and they are flushed lazily to amortize the
cost of the IPIs.

This specific motivation for this patch is an oops-causing regression
since 2.6.36 when using NFS under Xen, triggered by the NFS client's use
of vm_map_ram() introduced in 56e4ebf877 ("NFS: readdir with vmapped
pages") .  XFS also uses vm_map_ram() and could cause similar problems.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-02 14:51:15 -08:00
Stefano Stabellini
512b109ec9 xen: unplug the emulated devices at resume time
Early after being resumed we need to unplug again the emulated devices.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:40:53 +00:00
Stefano Stabellini
af42b8d12f xen: fix MSI setup and teardown for PV on HVM guests
When remapping MSIs into pirqs for PV on HVM guests, qemu is responsible
for doing the actual mapping and unmapping.
We only give qemu the desired pirq number when we ask to do the mapping
the first time, after that we should be reading back the pirq number
from qemu every time we want to re-enable the MSI.

This fixes a bug in xen_hvm_setup_msi_irqs that manifests itself when
trying to enable the same MSI for the second time: the old MSI to pirq
mapping is still valid at this point but xen_hvm_setup_msi_irqs would
try to assign a new pirq anyway.
A simple way to reproduce this bug is to assign an MSI capable network
card to a PV on HVM guest, if the user brings down the corresponding
ethernet interface and up again, Linux would fail to enable MSIs on the
device.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:34:25 +00:00
Ian Campbell
805e3f4950 xen: x86/32: perform initial startup on initial_page_table
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code
(which also starts on initial_page_table) switches to it.  This helps ensure
that the generic setup paths work on Xen unmodified. In particular
clone_pgd_range writes directly to the destination pgd entries and is used to
initialise swapper_pg_dir so we need to ensure that it remains writeable until
the last possible moment during bring up.

This is complicated slightly by the need to avoid sharing kernel PMD entries
when running under Xen, therefore the Xen implementation must make a copy of
the kernel PMD (which is otherwise referred to by both intial_page_table and
swapper_pg_dir) before switching to swapper_pg_dir.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-29 17:07:53 -08:00
Jeremy Fitzhardinge
31e323cca9 xen: don't bother to stop other cpus on shutdown/reboot
Xen will shoot all the VCPUs when we do a shutdown hypercall, so there's
no need to do it manually.

In any case it will fail because all the IPI irqs have been pulled
down by this point, so the cross-CPU calls will simply hang forever.

Until change 76fac077db the function calls
were not synchronously waited for, so this wasn't apparent.  However after
that change the calls became synchronous leading to a hang on shutdown
on multi-VCPU guests.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: Alok Kataria <akataria@vmware.com>
2010-11-29 14:16:53 -08:00
Mathias Krause
559ad0ff13 crypto: aesni-intel - Fixed build error on x86-32
Exclude AES-GCM code for x86-32 due to heavy usage of 64-bit registers
not available on x86-32.

While at it, fixed unregister order in aesni_exit().

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-29 08:35:39 +08:00
Linus Torvalds
a9e40a2493 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix the software context switch counter
  perf, x86: Fixup Kconfig deps
  x86, perf, nmi: Disable perf if counters are not accessible
  perf: Fix inherit vs. context rotation bug
2010-11-28 12:25:02 -08:00
Jeremy Fitzhardinge
e7a3481c02 x86/pvclock: Zero last_value on resume
If the guest domain has been suspend/resumed or migrated, then the
system clock backing the pvclock clocksource may revert to a smaller
value (ie, can be non-monotonic across the migration/save-restore).

Make sure we zero last_value in that case so that the domain
continues to see clock updates.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-28 09:33:20 +01:00
Mathias Krause
0d258efb6a crypto: aesni-intel - Ported implementation to x86-32
The AES-NI instructions are also available in legacy mode so the 32-bit
architecture may profit from those, too.

To illustrate the performance gain here's a short summary of a dm-crypt
speed test on a Core i7 M620 running at 2.67GHz comparing both assembler
implementations:

x86:                   i568       aes-ni    delta
ECB, 256 bit:     93.8 MB/s   123.3 MB/s   +31.4%
CBC, 256 bit:     84.8 MB/s   262.3 MB/s  +209.3%
LRW, 256 bit:    108.6 MB/s   222.1 MB/s  +104.5%
XTS, 256 bit:    105.0 MB/s   205.5 MB/s   +95.7%

Additionally, due to some minor optimizations, the 64-bit version also
got a minor performance gain as seen below:

x86-64:           old impl.    new impl.    delta
ECB, 256 bit:    121.1 MB/s   123.0 MB/s    +1.5%
CBC, 256 bit:    285.3 MB/s   290.8 MB/s    +1.9%
LRW, 256 bit:    263.7 MB/s   265.3 MB/s    +0.6%
XTS, 256 bit:    251.1 MB/s   255.3 MB/s    +1.7%

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-27 16:34:46 +08:00
Linus Torvalds
fbe6c4047f Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled
  x86-64: Fix and clean up AMD Fam10 MMCONF enabling
  x86: UV: Address interrupt/IO port operation conflict
  x86: Use online node real index in calulate_tbl_offset()
  x86, asm: Fix binutils 2.15 build failure
2010-11-27 07:28:47 +09:00
Linus Torvalds
d2f30c73ab Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Remove incorrect open-coded container_of()
  perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
  x86/kprobes: Prevent kprobes to probe on save_args()
  irq_work: Drop cmpxchg() result
  perf: Fix owner-list vs exit
  x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
  tracing: Fix recursive user stack trace
  perf,hw_breakpoint: Initialize hardware api earlier
  x86: Ignore trap bits on single step exceptions
  tracing: Force arch_local_irq_* notrace for paravirt
  tracing: Fix module use of trace_bprintk()
2010-11-27 07:28:17 +09:00
Cyrill Gorcunov
af86da5318 perf, x86: P4 PMU - describe config format
Add description of .config in a sake of RAW events.
At least this should bring some light to those who
will be reading this code.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:14:57 +01:00
Peter Zijlstra
004417a6d4 perf, arch: Cleanup perf-pmu init vs lockup-detector
The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:14:56 +01:00
Andi Kleen
5ef428c4b5 x86: Set cpu masks before calling CPU_STARTING notifiers
When booting up a CPU set the various topology masks before
calling the CPU_STARTING notifier. This way the notifier
can actually use the masks.

This is needed for a perf change.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290077254-12165-2-git-send-email-andi@firstfloor.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:14:56 +01:00
Franck Bui-Huu
6c7e550f13 perf: Introduce is_sampling_event()
and use it when appropriate.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-1-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:14:54 +01:00
Ingo Molnar
6c869e772c Merge branch 'perf/urgent' into perf/core
Conflicts:
	arch/x86/kernel/apic/hw_nmi.c

Merge reason: Resolve conflict, queue up dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:07:02 +01:00
Ingo Molnar
e4e91ac410 Merge commit 'v2.6.37-rc3' into perf/core
Merge reason: Pick up latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:04:47 +01:00
Peter Zijlstra
cc2067a514 perf, x86: Fixup Kconfig deps
This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to
a hw_breakpoint dep) but doesn't unconditionally provide
HAVE_PERF_EVENT.

(This can cause build failures on M386/M486 kernel .config's.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222055.982965150@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:00:58 +01:00
Don Zickus
33c6d6a7ad x86, perf, nmi: Disable perf if counters are not accessible
In a kvm virt guests, the perf counters are not emulated.  Instead they
return zero on a rdmsrl. The perf nmi handler uses the fact that crossing
a zero means the counter overflowed (for those counters that do not have
specific interrupt bits). Therefore on kvm guests, perf will swallow all
NMIs thinking the counters overflowed.

This causes problems for subsystems like kgdb which needs NMIs to do its
magic. This problem was discovered by running kgdb tests.

The solution is to write garbage into a perf counter during the
initialization and hopefully reading back the same number.  On kvm
guests, the value will be read back as zero and we disable perf as
a result.

Reported-by: Jason Wessel <jason.wessel@windriver.com>
Patch-inspired-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:00:57 +01:00
Linus Torvalds
8a3fbc9fdb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: remove duplicated #include
  xen: x86/32: perform initial startup on initial_page_table
2010-11-25 08:35:53 +09:00
Andrew Morton
91d95fda85 arch/x86/include/asm/fixmap.h: mark __set_fixmap_offset as __always_inline
When compiling arch/x86/kernel/early_printk_mrst.c with i386
allmodconfig, gcc-4.1.0 generates an out-of-line copy of
__set_fixmap_offset() which contains a reference to
__this_fixmap_does_not_exist which the compiler cannot elide.

Marking __set_fixmap_offset() as __always_inline prevents this.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Feng Tang <feng.tang@intel.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:49 +09:00
Huang Weiyi
e6d4a76dbf xen: remove duplicated #include
Remove duplicated #include('s) in
  arch/x86/xen/setup.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-24 12:07:45 -05:00
Ian Campbell
5b5c1af104 xen: x86/32: perform initial startup on initial_page_table
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code
(which also starts on initial_page_table) switches to it.  This helps ensure
that the generic setup paths work on Xen unmodified. In particular
clone_pgd_range writes directly to the destination pgd entries and is used to
initialise swapper_pg_dir so we need to ensure that it remains writeable until
the last possible moment during bring up.

This is complicated slightly by the need to avoid sharing kernel PMD entries
when running under Xen, therefore the Xen implementation must make a copy of
the kernel PMD (which is otherwise referred to by both intial_page_table and
swapper_pg_dir) before switching to swapper_pg_dir.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-24 12:07:44 -05:00
Linus Torvalds
a4ec046c98 Merge branch 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: implement XENMEM_machphys_mapping
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  ...
2010-11-24 08:23:18 +09:00
Jeremy Fitzhardinge
bc15fde77f xen: use default_idle
We just need the idle loop to drop into safe_halt, which default_idle()
is perfectly capable of doing.  There's no need to duplicate it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-22 17:19:34 -08:00
Jeremy Fitzhardinge
c2d0879112 xen: clean up "extra" memory handling some more
Make sure that extra_pages is added for all E820_RAM regions beyond
mem_end - completely excluded regions as well as the remains of partially
included regions.

Also makes sure the extra region is not unnecessarily high, and simplifies
the logic to decide which regions should be added.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-22 16:34:28 -08:00
Jeremy Fitzhardinge
9b8321531a Merge branches 'upstream/core', 'upstream/xenfs' and 'upstream/evtchn' into upstream/for-linus
* upstream/core:
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen: implement XENMEM_machphys_mapping

* upstream/xenfs:
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code

* upstream/evtchn:
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  xen/evtchn: ports start enabled
  xen/evtchn: dynamically allocate port_user array
  xen/evtchn: track enabled state for each port
2010-11-22 12:22:42 -08:00
Konrad Rzeszutek Wilk
ec35a69c46 xen: set IO permission early (before early_cpu_init())
This patch is based off "xen dom0: Set up basic IO permissions for dom0."
by Juan Quintela <quintela@redhat.com>.

On AMD machines when we boot the kernel as Domain 0 we get this nasty:

mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.1-101116  x86_64  debug=y  Not tainted ]----
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff8130271b>]
(XEN) RFLAGS: 0000000000000282   EM: 1   CONTEXT: pv guest
(XEN) rax: 000000008000c068   rbx: ffffffff8186c680   rcx: 0000000000000068
(XEN) rdx: 0000000000000cf8   rsi: 000000000000c000   rdi: 0000000000000000
(XEN) rbp: ffffffff81801e98   rsp: ffffffff81801e50   r8:  ffffffff81801eac
(XEN) r9:  ffffffff81801ea8   r10: ffffffff81801eb4   r11: 00000000ffffffff
(XEN) r12: ffffffff8186c694   r13: ffffffff81801f90   r14: ffffffffffffffff
(XEN) r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) cr3: 0000000221803000   cr2: 0000000000000000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81801e50:

RIP points to read_pci_config() function.

The issue is that we don't set IO permissions for the Linux kernel early enough.

The call sequence used to be:

    xen_start_kernel()
	x86_init.oem.arch_setup = xen_setup_arch;
        setup_arch:
           - early_cpu_init
               - early_init_amd
                  - read_pci_config
           - x86_init.oem.arch_setup [ xen_arch_setup ]
               - set IO permissions.

We need to set the IO permissions earlier on, which this patch does.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-22 12:10:31 -08:00
Lin Ming
691513f70d x86: Resume trampoline must be executable
commit 5bd5a452(x86: Add NX protection for kernel data) marked the
trampoline area NX - which unsurprisingly breaks resume and cpu
hotplug.

Revert the portion of that commit, which touches the trampoline.

Originally-from: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <1290410581.2405.24.camel@minggr.sh.intel.com>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Siarhei Liakh <sliakh.lkml@gmail.com>
Cc: Xuxian Jiang <jiang@cs.ncsu.edu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-22 14:38:52 +01:00
Thomas Gleixner
9cdca86972 x86: platform: Move iris to x86/platform where it belongs
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-20 10:37:05 +01:00
Jeremy Fitzhardinge
d2a817130c xen: re-enable boot-time ballooning
Now that the balloon driver doesn't stumble over non-RAM pages, we
can enable the extra space for ballooning.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19 23:28:08 -08:00
Vasiliy Kulikov
5ca9afdb9f x86, mrst: Check platform_device_register() return code
platform_device_register() may fail, if so propagate the return
code from mrst_device_create().

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
LKML-Reference: <1290104207-31279-1-git-send-email-segoon@openwall.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-11-18 13:45:46 -08:00
Ingo Molnar
ae51ce9061 Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core 2010-11-18 20:07:12 +01:00
Linus Torvalds
fb3ff69d13 Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: Fix host userspace gsbase corruption
  KVM: Correct ordering of ldt reload wrt fs/gs reload
2010-11-18 09:45:47 -08:00
Linus Torvalds
2d42dc3feb Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Fix regression in evr register handling
  kgdb,x86: fix regression in detach handling
  kdb: fix crash when KDB_BASE_CMD_MAX is exceeded
  kdb: fix memory leak in kdb_main.c
2010-11-18 08:24:58 -08:00
Hans Rosenfeld
f658bcfb26 x86, cacheinfo: Cleanup L3 cache index disable support
Adaptions to the changes of the AMD northbridge caching code: instead
of a bool in each l3 struct, use a flag in amd_northbridges.flags to
indicate L3 cache index disable support; use a pointer to the whole
northbridge instead of the misc device in the l3 struct; simplify the
initialisation; dynamically generate sysfs attribute array.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-18 15:53:06 +01:00
Hans Rosenfeld
9653a5c76c x86, amd-nb: Cleanup AMD northbridge caching code
Support more than just the "Misc Control" part of the northbridges.
Support more flags by turning "gart_supported" into a single bit flag
that is stored in a flags member. Clean up related code by using a set
of functions (amd_nb_num(), amd_nb_has_feature() and node_to_amd_nb())
instead of accessing the NB data structures directly. Reorder the
initialization code and put the GART flush words caching in a separate
function.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-18 15:53:05 +01:00
Hans Rosenfeld
eec1d4fa00 x86, amd-nb: Complete the rename of AMD NB and related code
Not only the naming of the files was confusing, it was even more so for
the function and variable names.

Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-18 15:53:04 +01:00
Soeren Sandmann Pedersen
9c0729dc80 x86: Eliminate bp argument from the stack tracing routines
The various stack tracing routines take a 'bp' argument in which the
caller is supposed to provide the base pointer to use, or 0 if doesn't
have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not
defined, this means all callers in principle should either always pass
0, or be conditional on CONFIG_FRAME_POINTER.

However, there are only really three use cases for stack tracing:

(a) Trace the current task, including IRQ stack if any
(b) Trace the current task, but skip IRQ stack
(c) Trace some other task

In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just
be 0.  If it _is_ defined, then

- in case (a) bp should be gotten directly from the CPU's register, so
  the caller should pass NULL for regs,

- in case (b) the caller should should pass the IRQ registers to
  dump_trace(),

- in case (c) bp should be gotten from the top of the task's stack, so
  the caller should pass NULL for regs.

Hence, the bp argument is not necessary because the combination of
task and regs is sufficient to determine an appropriate value for bp.

This patch introduces a new inline function stack_frame(task, regs)
that computes the desired bp. This function is then called from the
two versions of dump_stack().

Signed-off-by: Soren Sandmann <ssp@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>,
LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-18 14:37:34 +01:00
Jan Beulich
37db6c8f1d x86-64: Fix and clean up AMD Fam10 MMCONF enabling
Candidate memory ranges were not calculated properly (start
addresses got needlessly rounded down, and end addresses didn't
get rounded up at all), address comparison for secondary CPUs
was done on only part of the address, and disabled status wasn't
tracked properly.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <4CE24DF40200007800022737@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:41:35 +01:00
Masami Hiramatsu
de31ec8a31 x86/kprobes: Prevent kprobes to probe on save_args()
Prevent kprobes to probe on save_args() since this function
will be called from breakpoint exception handler. That will
cause infinit loop on breakpoint handling.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20101118101655.2779.2816.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:40:19 +01:00
matthieu castet
84e1c6bb38 x86: Add RO/NX protection for loadable kernel modules
This patch is a logical extension of the protection provided by
CONFIG_DEBUG_RODATA to LKMs. The protection is provided by
splitting module_core and module_init into three logical parts
each and setting appropriate page access permissions for each
individual section:

 1. Code: RO+X
 2. RO data: RO+NX
 3. RW data: RW+NX

In order to achieve proper protection, layout_sections() have
been modified to align each of the three parts mentioned above
onto page boundary. Next, the corresponding page access
permissions are set right before successful exit from
load_module(). Further, free_module() and sys_init_module have
been modified to set module_core and module_init as RW+NX right
before calling module_free().

By default, the original section layout and access flags are
preserved. When compiled with CONFIG_DEBUG_SET_MODULE_RONX=y,
the patch will page-align each group of sections to ensure that
each page contains only one type of content and will enforce
RO/NX for each group of pages.

  -v1: Initial proof-of-concept patch.
  -v2: The patch have been re-written to reduce the number of #ifdefs
       and to make it architecture-agnostic. Code formatting has also
       been corrected.
  -v3: Opportunistic RO/NX protection is now unconditional. Section
       page-alignment is enabled when CONFIG_DEBUG_RODATA=y.
  -v4: Removed most macros and improved coding style.
  -v5: Changed page-alignment and RO/NX section size calculation
  -v6: Fixed comments. Restricted RO/NX enforcement to x86 only
  -v7: Introduced CONFIG_DEBUG_SET_MODULE_RONX, added
       calls to set_all_modules_text_rw() and set_all_modules_text_ro()
       in ftrace
  -v8: updated for compatibility with linux 2.6.33-rc5
  -v9: coding style fixes
 -v10: more coding style fixes
 -v11: minor adjustments for -tip
 -v12: minor adjustments for v2.6.35-rc2-tip
 -v13: minor adjustments for v2.6.37-rc1-tip

Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F914.9070106@free.fr>
[ minor cleanliness edits, -v14: build failure fix ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:32:56 +01:00
Matthieu Castet
5bd5a45266 x86: Add NX protection for kernel data
This patch expands functionality of CONFIG_DEBUG_RODATA to set main
(static) kernel data area as NX.

The following steps are taken to achieve this:

 1. Linker script is adjusted so .text always starts and ends on a page bound
 2. Linker script is adjusted so .rodata always start and end on a page boundary
 3. NX is set for all pages from _etext through _end in mark_rodata_ro.
 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c
 5. bios rom is set to x when pcibios is used.

The results of patch application may be observed in the diff of kernel page
table dumps:

pcibios:

 -- data_nx_pt_before.txt       2009-10-13 07:48:59.000000000 -0400
 ++ data_nx_pt_after.txt        2009-10-13 07:26:46.000000000 -0400
  0x00000000-0xc0000000           3G                           pmd
  ---[ Kernel Mapping ]---
 -0xc0000000-0xc0100000           1M     RW             GLB x  pte
 +0xc0000000-0xc00a0000         640K     RW             GLB NX pte
 +0xc00a0000-0xc0100000         384K     RW             GLB x  pte
 -0xc0100000-0xc03d7000        2908K     ro             GLB x  pte
 +0xc0100000-0xc0318000        2144K     ro             GLB x  pte
 +0xc0318000-0xc03d7000         764K     ro             GLB NX pte
 -0xc03d7000-0xc0600000        2212K     RW             GLB x  pte
 +0xc03d7000-0xc0600000        2212K     RW             GLB NX pte
  0xc0600000-0xf7a00000         884M     RW         PSE GLB NX pmd
  0xf7a00000-0xf7bfe000        2040K     RW             GLB NX pte
  0xf7bfe000-0xf7c00000           8K                           pte

No pcibios:

 -- data_nx_pt_before.txt       2009-10-13 07:48:59.000000000 -0400
 ++ data_nx_pt_after.txt        2009-10-13 07:26:46.000000000 -0400
  0x00000000-0xc0000000           3G                           pmd
  ---[ Kernel Mapping ]---
 -0xc0000000-0xc0100000           1M     RW             GLB x  pte
 +0xc0000000-0xc0100000           1M     RW             GLB NX pte
 -0xc0100000-0xc03d7000        2908K     ro             GLB x  pte
 +0xc0100000-0xc0318000        2144K     ro             GLB x  pte
 +0xc0318000-0xc03d7000         764K     ro             GLB NX pte
 -0xc03d7000-0xc0600000        2212K     RW             GLB x  pte
 +0xc03d7000-0xc0600000        2212K     RW             GLB NX pte
  0xc0600000-0xf7a00000         884M     RW         PSE GLB NX pmd
  0xf7a00000-0xf7bfe000        2040K     RW             GLB NX pte
  0xf7bfe000-0xf7c00000           8K                           pte

The patch has been originally developed for Linux 2.6.34-rc2 x86 by
Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>.

 -v1:  initial patch for 2.6.30
 -v2:  patch for 2.6.31-rc7
 -v3:  moved all code into arch/x86, adjusted credits
 -v4:  fixed ifdef, removed credits from CREDITS
 -v5:  fixed an address calculation bug in mark_nxdata_nx()
 -v6:  added acked-by and PT dump diff to commit log
 -v7:  minor adjustments for -tip
 -v8:  rework with the merge of "Set first MB as RW+NX"

Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F82E.60601@free.fr>
[ minor cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 12:52:04 +01:00
matthieu castet
64edc8ed5f x86: Fix improper large page preservation
This patch fixes a bug in try_preserve_large_page() which may
result in improper large page preservation and improper
application of page attributes to the memory area outside of the
original change request.

More specifically, the problem manifests itself when set_memory_*()
is called for several pages at the beginning of the large page and
try_preserve_large_page() erroneously concludes that the change can
be applied to whole large page.

The fix consists of 3 parts:

  1. Addition of "required" protection attributes in
     static_protections(), so .data and .bss can be guaranteed to
     stay "RW"

  2. static_protections() is now called for every small
     page within large page to determine compatibility of new
     protection attributes (instead of just small pages within the
     requested range).

  3. Large page can be preserved only if attribute change is
     large-page-aligned and covers whole large page.

 -v1: Try_preserve_large_page() patch for Linux 2.6.34-rc2
 -v2: Replaced pfn check with address check for kernel rw-data

Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F7F3.8030809@free.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 12:52:04 +01:00
Dimitri Sivanich
8191c9f692 x86: UV: Address interrupt/IO port operation conflict
This patch for SGI UV systems addresses a problem whereby
interrupt transactions being looped back from a local IOH,
through the hub to a local CPU can (erroneously) conflict with
IO port operations and other transactions.

To workaound this we set a high bit in the APIC IDs used for
interrupts. This bit appears to be ignored by the sockets, but
it avoids the conflict in the hub.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20101116222352.GA8155@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
___

 arch/x86/include/asm/uv/uv_hub.h   |    4 ++++
 arch/x86/include/asm/uv/uv_mmrs.h  |   19 ++++++++++++++++++-
 arch/x86/kernel/apic/x2apic_uv_x.c |   25 +++++++++++++++++++++++--
 arch/x86/platform/uv/tlb_uv.c      |    2 +-
 arch/x86/platform/uv/uv_time.c     |    4 +++-
 5 files changed, 49 insertions(+), 5 deletions(-)
2010-11-18 10:41:25 +01:00
Ingo Molnar
fcf48a725a Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent 2010-11-18 10:37:51 +01:00
Yinghai Lu
9223081f54 x86: Use online node real index in calulate_tbl_offset()
Found a NUMA system that doesn't have RAM installed at the first
socket which hangs while executing init scripts.

bisected it to:

 | commit 9329672021
 | Author: Shaohua Li <shaohua.li@intel.com>
 | Date:   Wed Oct 20 11:07:03 2010 +0800
 |
 |     x86: Spread tlb flush vector between nodes

It turns out when first socket is not online it could have cpus on
node1 tlb_offset set to bigger than NUM_INVALIDATE_TLB_VECTORS.

That could affect systems like 4 sockets, but socket 2 doesn't
have installed, sockets 3 will get too big tlb_offset.

Need to use real online node idx.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CDEDE59.40603@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 10:10:50 +01:00
Shérab
82148d1d0b x86/platform: Add Eurobraille/Iris power off support
The Iris machines from Eurobraille do not have APM or ACPI support
to shut themselves down properly.  A special I/O sequence is
needed to do so.  This modle runs this I/O sequence at
kernel shutdown when its force parameter is set to 1.

Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
[ did minor coding style edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 10:03:24 +01:00
Kees Cook
79250af2d5 x86: Fix included-by file reference comments
Adjust the paths for files that are including verify_cpu.S.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
LKML-Reference: <1289931004-16066-1-git-send-email-kees.cook@canonical.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 09:58:54 +01:00
Tetsuo Handa
96e612ffc3 x86, asm: Fix binutils 2.15 build failure
Add parentheses around one pushl_cfi argument.

Commit df5d1874 "x86: Use {push,pop}{l,q}_cfi in more places"
caused GNU assembler 2.15 (Debian Sarge) to fail. It is still
failing as of commit 07bd8516 "x86, asm: Restore parentheses
around one pushl_cfi argument". This patch solves build failure
with GNU assembler 2.15.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Jan Beulich <jbeulich@novell.com>
Cc: heukelum@fastmail.fm
Cc: hpa@linux.intel.com
LKML-Reference: <201011160445.oAG4jGif079860@www262.sakura.ne.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 09:25:11 +01:00
Rakib Mullick
0e2af2a9ab x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
backtrace_mask has been used under the code context of
ARCH_HAS_NMI_WATCHDOG. So put it into that context.
We were warned by the following warning:

  arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 09:15:12 +01:00
Don Zickus
072b198a4a x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog
Now that the bulk of the old nmi_watchdog is gone, remove all
the stub variables and hooks associated with it.

This touches lots of files mainly because of how the io_apic
nmi_watchdog was implemented.  Now that the io_apic nmi_watchdog
is forever gone, remove all its fingers.

Most of this code was not being exercised by virtue of
nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to
risky here.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 09:08:23 +01:00
Don Zickus
5f2b0ba4d9 x86, nmi_watchdog: Remove the old nmi_watchdog
Now that we have a new nmi_watchdog that is more generic and
sits on top of the perf subsystem, we really do not need the old
nmi_watchdog any more.

In addition, the old nmi_watchdog doesn't really work if you are
using the default clocksource, hpet.  The old nmi_watchdog code
relied on local apic interrupts to determine if the cpu is still
alive.  With hpet as the clocksource, these interrupts don't
increment any more and the old nmi_watchdog triggers false
postives.

This piece removes the old nmi_watchdog code and stubs out any
variables and functions calls.  The stubs are the same ones used
by the new nmi_watchdog code, so it should be well tested.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 09:08:23 +01:00
Ingo Molnar
a89d4bd055 Merge branch 'tip/perf/urgent-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent 2010-11-18 08:07:36 +01:00
Avi Kivity
c8770e7ba6 KVM: VMX: Fix host userspace gsbase corruption
We now use load_gs_index() to load gs safely; unfortunately this also
changes MSR_KERNEL_GS_BASE, which we managed separately.  This resulted
in confusion and breakage running 32-bit host userspace on a 64-bit kernel.

Fix by
- saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs
- doing the host save/load unconditionally, instead of only when in guest
  long mode

Things can be cleaned up further, but this is the minmal fix for now.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-17 19:48:05 -02:00
Avi Kivity
0a77fe4c18 KVM: Correct ordering of ldt reload wrt fs/gs reload
If fs or gs refer to the ldt, they must be reloaded after the ldt.  Reorder
the code to that effect.

Userspace code that uses the ldt with kvm is nonexistent, so this doesn't fix
a user-visible bug.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-17 19:47:59 -02:00
Jason Wessel
10a6e67648 kgdb,x86: fix regression in detach handling
The fix from ba773f7c51
(x86,kgdb: Fix hw breakpoint regression) was not entirely complete.

The kgdb_remove_all_hw_break() function also needs to call the
hw_break_release_slot() or else a breakpoint can get activated again
after the debugger has detached.

The kgdb test suite exposes the behavior in the form of either a hang
or repetitive failure.  The kernel config that exposes the problem
contains all of the following:

CONFIG_DEBUG_RODATA=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-17 13:54:57 -06:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Randy Dunlap
ad02519a0d x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
commit b9fc71f47 (x86, mrst: The shutdown for MRST requires the SCU
IPC mechanism) introduced the following warning:

 warning: (X86_MRST && PCI && PCI_GOANY && X86_32 &&
 X86_EXTENDED_PLATFORM && X86_IO_APIC) selects INTEL_SCU_IPC which has
 unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && X86_MRST)

which is due to the hierarchical menu structure.

Select X86_PLATFORM_DEVICES as well.

Originally-from: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20101115101406.77e072ef.randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
2010-11-17 13:41:44 +01:00
Alan Cox
b9fc71f47d x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
Fix the build failure reported by Randy.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101115173110.6877.83958.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-17 13:27:44 +01:00
Jeremy Fitzhardinge
20b4755e4f Merge commit 'v2.6.37-rc2' into upstream/xenfs
* commit 'v2.6.37-rc2': (10093 commits)
  Linux 2.6.37-rc2
  capabilities/syslog: open code cap_syslog logic to fix build failure
  i2c: Sanity checks on adapter registration
  i2c: Mark i2c_adapter.id as deprecated
  i2c: Drivers shouldn't include <linux/i2c-id.h>
  i2c: Delete unused adapter IDs
  i2c: Remove obsolete cleanup for clientdata
  include/linux/kernel.h: Move logging bits to include/linux/printk.h
  Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)
  hwmon: (w83795) Check for BEEP pin availability
  hwmon: (w83795) Clear intrusion alarm immediately
  hwmon: (w83795) Read the intrusion state properly
  hwmon: (w83795) Print the actual temperature channels as sources
  hwmon: (w83795) List all usable temperature sources
  hwmon: (w83795) Expose fan control method
  hwmon: (w83795) Fix fan control mode attributes
  hwmon: (lm95241) Check validity of input values
  hwmon: Change mail address of Hans J. Koch
  PCI: sysfs: fix printk warnings
  GFS2: Fix inode deallocation race
  ...
2010-11-16 11:06:22 -08:00
Linus Torvalds
e5c13537b0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: sysfs: fix printk warnings
  PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
  PCI: read current power state at enable time
  PCI: fix size checks for mmap() on /proc/bus/pci files
  x86/PCI: coalesce overlapping host bridge windows
  PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-15 14:01:33 -08:00
Tadeusz Struk
0bd82f5f63 crypto: aesni-intel - RFC4106 AES-GCM Driver Using Intel New Instructions
This patch adds an optimized RFC4106 AES-GCM implementation for 64-bit
kernels. It supports 128-bit AES key size. This leverages the crypto
AEAD interface type to facilitate a combined AES & GCM operation to
be implemented in assembly code. The assembly code leverages Intel(R)
AES New Instructions and the PCLMULQDQ instruction.

Signed-off-by: Adrian Hoban <adrian.hoban@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com>
Signed-off-by: Erdinc Ozturk <erdinc.ozturk@intel.com>
Signed-off-by: James Guilford <james.guilford@intel.com>
Signed-off-by: Wajdi Feghali <wajdi.k.feghali@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-13 21:47:55 +09:00
Linus Torvalds
891cbd30ef Merge branch 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: do not release any memory under 1M in domain 0
  xen: events: do not unmask event channels on resume
  xen: correct size of level2_kernel_pgt
2010-11-12 16:01:55 -08:00
Linus Torvalds
b5c5510436 Merge branch 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  MAINTAINERS: Mark XEN lists as moderated
  xen-pcifront: fix PCI reference leak
  xen-pcifront: Remove duplicate inclusion of headers.
  xen: fix memory leak in Xen PCI MSI/MSI-X allocator.
  MAINTAINERS: Update mailing list name for Xen pieces.
2010-11-12 15:54:39 -08:00
Ian Campbell
7e77506a59 xen: implement XENMEM_machphys_mapping
This hypercall allows Xen to specify a non-default location for the
machine to physical mapping. This capability is used when running a 32
bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to
exactly the size required.

[ Impact: add Xen hypercall definitions ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-11-12 15:00:06 -08:00
Linus Torvalds
25a34554d6 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pvclock: Remove leftover scale_delta() function
  x86, apic: Remove double #include
  x86: Adjust section annotations in AMD Fam10 MMCONF enabling code
  x86, UV: Update node controller MMRs
  x86: Remove unnecessary casts of void ptr returning alloc function return values
  x86: Address gcc4.6 "set but not used" warnings in apic.h
  x86, mm: Fix section mismatch in tlb.c
2010-11-12 08:40:23 -08:00
Frederic Weisbecker
6c0aca288e x86: Ignore trap bits on single step exceptions
When a single step exception fires, the trap bits, used to
signal hardware breakpoints, are in a random state.

These trap bits might be set if another exception will follow,
like a breakpoint in the next instruction, or a watchpoint in the
previous one. Or there can be any junk there.

So if we handle these trap bits during the single step exception,
we are going to handle an exception twice, or we are going to
handle junk.

Just ignore them in this case.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=21332

Reported-by: Michael Stefaniuc <mstefani@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Alexandre Julliard <julliard@winehq.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: All since 2.6.33.x <stable@kernel.org>
2010-11-12 14:51:01 +01:00
Dirk Brandewie
37bc9f5078 x86: Ce4100: Add reboot_fixup() for CE4100
This patch adds the CE4100 reboot fixup to reboot_fixups_32.c

[ tglx: Moved PCI id to reboot_fixups_32.c ]

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
LKML-Reference: <5bdcfb4f0206fa721570504e95659a03b815bc5e.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-12 00:45:41 +01:00
Dirk Brandewie
91d8037f56 ce4100: Add PCI register emulation for CE4100
This patch provides access methods for PCI registers that mis-behave on
the CE4100. Each register can be assigned a private init, read and
write routine. The exception to this is the bridge device. The
bridge device is the only device on bus zero (0) that requires any
fixup so it is a special case.

[ tglx: minor coding style cleanups, __init annotation and
  	simplification of ce4100_conf_read/write ]

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
LKML-Reference: <40b6751381c2275dc359db5a17989cce22ad8db7.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-12 00:45:41 +01:00
Thomas Gleixner
c751e17b53 x86: Add CE4100 platform support
Add CE4100 platform support. CE4100 needs early setup like
moorestown.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-12 00:45:41 +01:00
Stefano Stabellini
e060e7af98 xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
Set VM_PFNMAP in the privcmd mmap file_op, rather than later in
xen_remap_domain_mfn_range when it is too late because
vma_wants_writenotify has already been called and vm_page_prot has
already been modified.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-11 12:37:43 -08:00
Bjorn Helgaas
4723d0f2f9 x86/PCI: coalesce overlapping host bridge windows
Some BIOSes provide PCI host bridge windows that overlap, e.g.,

    pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff]

If we simply insert these as children of iomem_resource, the second window
fails because it conflicts with the first, and the third is inserted as a
child of the first, i.e.,

    b0000000-ffffffff PCI Bus 0000:00
      f0000000-ffffffff PCI Bus 0000:00

When we claim PCI device resources, this can cause collisions like this
if we put them in the first window:

    pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff]

Host bridge windows are top-level resources by definition, so it doesn't
make sense to make the third window a child of the first.  This patch
coalesces any host bridge windows that overlap.  For the example above,
the result is this single window:

    pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff]

This fixes a 2.6.34 regression.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011
Reported-and-tested-by: Anisse Astier <anisse@astier.eu>
Reported-and-tested-by: Pramod Dematagoda <pmd.lotr.gandalf@gmail.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11 09:34:31 -08:00
Feng Tang
6f207e9bb4 x86: mrst: Set vRTC's IRQ to level trigger type
When setting up the mpc_intsrc structure for vRTC's IRQ,
we need to set its irqflag to level trigger, otherwise
it will be taken as edge triggered and the vRTC IRQ will
fire only once, as there is never a EOI issued from the
IA core for it.

The original code worked in previous kernel. This is  because it
was configured to level trigger type by luck. It fell
into the default PCI trigger category which is level triggered.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101111155019.12924.569.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 17:43:18 +01:00
Vinod Koul
86071535f8 x86: mrst: Add audio driver bindings
This patch adds the sound card bindings for Moorestown (pmic_audio) and
the Medfield platform (msic_audio) as IPC devices. This ensures they will be
created at the right time.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110174044.11340.78008.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:28 +01:00
Feng Tang
0146f26145 rtc: Add drivers/rtc/rtc-mrst.c
Provide the standard kernel rtc driver interface on top of the vrtc layer
added in the previous patch.

Signed-off-by: Feng Tang <feng.tang@intel.com>
LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain>
[Fixed swapped arguments on IPC]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
[Cleaned up and the device creation moved to arch/x86/platform]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:27 +01:00
Feng Tang
7309282c90 x86: mrst: Add vrtc driver which serves as a wall clock device
Moorestown platform doesn't have a m146818 RTC device like traditional
x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides
some basic RTC functions like get/set time. vrtc serves as the only
wall clock device on Moorestown platform.

[ tglx: Changed the exports to _GPL ]

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:27 +01:00
Alek Du
cfb505a7eb x86: mrst: Add Moorestown specific reboot/shutdown support
Moorestowns needs to use a special IPC command to reboot or shutdown the
platform.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110164928.6365.94243.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:27 +01:00