Commit Graph

891 Commits

Author SHA1 Message Date
Linus Torvalds
489de30259 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
  [POWERPC] Create add_rtc() function to enable the RTC CMOS driver
  [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
  [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
  [POWERPC] Oprofile support for Power 5++
  [POWERPC] Enable arbitary speed tty ioctls and split input/output speed
  [POWERPC] Make drivers/char/hvc_console.c:khvcd() static
  [POWERPC] Remove dead code for preventing pread() and pwrite() calls
  [POWERPC] Remove unnecessary #undef printk from prom.c
  [POWERPC] Fix typo in Ebony default DTS
  [POWERPC] Check for NULL ppc_md.init_IRQ() before calling
  [POWERPC] Remove extra return statement
  [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
  [POWERPC] pasemi: Rename platform
  [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
  [POWERPC] Add __read_mostly support for powerpc
  [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
  [POWERPC] Create a dummy zImage if no valid platform has been selected
  [POWERPC] PS3: Bootwrapper support.
  [POWERPC] powermac i2c: Use mutex
  [POWERPC] Schedule removal of arch/ppc
  ...

Fixed up conflicts manually in:

	Documentation/feature-removal-schedule.txt
	arch/powerpc/kernel/pci_32.c
	arch/powerpc/kernel/pci_64.c
	include/asm-powerpc/pci.h

and asked the powerpc people to double-check the result..
2007-07-16 17:58:08 -07:00
David S. Miller
f798634d80 [SERIAL] SUNHV: Fix jerky console on LDOM guests.
Mixing putchar() and write() hvcalls does not work %100
correctly.  But we should be using write() all the time
if we can, even from ->start_tx(), anyways.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 17:12:00 -07:00
Linus Torvalds
02b2318e07 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (26 commits)
  [SPARC64]: Fix UP build.
  [SPARC64]: dr-cpu unconfigure support.
  [SERIAL]: Fix console write locking in sparc drivers.
  [SPARC64]: Give more accurate errors in dr_cpu_configure().
  [SPARC64]: Clear cpu_{core,sibling}_map[] in smp_fill_in_sib_core_maps()
  [SPARC64]: Fix leak when DR added cpu does not bootup.
  [SPARC64]: Add ->set_affinity IRQ handlers.
  [SPARC64]: Process dr-cpu events in a kthread instead of workqueue.
  [SPARC64]: More sensible udelay implementation.
  [SPARC64]: SMP build fixes.
  [SPARC64]: mdesc.c needs linux/mm.h
  [SPARC64]: Fix build regressions added by dr-cpu changes.
  [SPARC64]: Unconditionally register vio_bus_type.
  [SPARC64]: Initial LDOM cpu hotplug support.
  [SPARC64]: Fix setting of variables in LDOM guest.
  [SPARC64]: Fix MD property lifetime bugs.
  [SPARC64]: Abstract out mdesc accesses for better MD update handling.
  [SPARC64]: Use more mearningful names for IRQ registry.
  [SPARC64]: Initial domain-services driver.
  [SPARC64]: Export powerd facilities for external entities.
  ...
2007-07-16 10:45:23 -07:00
Linus Torvalds
b91cba52e9 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (68 commits)
  sh: sh-rtc support for SH7709.
  sh: Revert __xdiv64_32 size change.
  sh: Update r7785rp defconfig.
  sh: Export div symbols for GCC 4.2 and ST GCC.
  sh: fix race in parallel out-of-tree build
  sh: Kill off dead mach.c for hp6xx.
  sh: hd64461.h cleanup and added comments.
  sh: Update the alignment when 4K stacks are used.
  sh: Add a .bss.page_aligned section for 4K stacks.
  sh: Don't let SH-4A clobber SH-4 CFLAGS.
  sh: Add parport stub for SuperIO ports.
  sh: Drop -Wa,-dsp for DSP tuning.
  sh: Update dreamcast defconfig.
  fb: pvr2fb: A few more __devinit annotations for PCI.
  fb: pvr2fb: Fix up section mismatch warnings.
  sh: Select IPR-IRQ for SH7091.
  sh: Correct __xdiv64_32/div64_32 return value size.
  sh: Fix timer-tmu build for SH-3.
  sh: Add cpu and mach links to CLEAN_FILES.
  sh: Preliminary support for the SH-X3 CPU.
  ...
2007-07-16 10:32:02 -07:00
Jes Sorensen
17e0c7cc1d sn_console section mismatch warning
Do not mark sn_sal_console_setup as __init since it's referenced from
non init data structures.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:53 -07:00
Alan Cox
d471d340ef 68360serial: remove broken optimisation
Remove the broken 'no termios change' optimisation for this driver.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:51 -07:00
Haavard Skinnemoen
9e6077bd84 atmel_serial: fix break handling
The RXBRK field in the AT91/AT32 USART status register has the
following definition according to e.g. the AT32AP7000 data sheet:

    RXBRK: Break Received/End of Break
    0: No Break received or End of Break detected since the last RSTSTA.
    1: Break Received or End of Break detected since the last RSTSTA.

Thus, for each break, the USART sets the RXBRK bit twice. This patch
modifies the driver to report the break event to the serial core only
once by keeping track of whether a break condition is currently
active. The break_active flag is reset as soon as a character is
received, so even if we miss the start-of-break interrupt this should
do the right thing.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ivan Kuten <ivan.kuten@promwad.com>
Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Thiemo Seufer
c1fbac4479 Update zilog timeout
Update zilog timeout, thanks Peter Fuerst.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Peter Fuerst <pf@net.alphadv.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:42 -07:00
Yinghai Lu
18a8bd949d serial: convert early_uart to earlycon for 8250
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and
include/asm-x86_64/serial.h.  the serial8250_ports need to be probed late in
serial initializing stage.  the console_init=>serial8250_console_init=>
register_console=>serial8250_console_setup will return -ENDEV, and console
ttyS0 can not be enabled at that time.  need to wait till uart_add_one_port in
drivers/serial/serial_core.c to call register_console to get console ttyS0.
that is too late.

Make early_uart to use early_param, so uart console can be used earlier.  Make
it to be bootconsole with CON_BOOT flag, so can use console handover feature.
and it will switch to corresponding normal serial console automatically.

new command line will be:
	console=uart8250,io,0x3f8,9600n8
	console=uart8250,mmio,0xff5e0000,115200n8
or
	earlycon=uart8250,io,0x3f8,9600n8
	earlycon=uart8250,mmio,0xff5e0000,115200n8

it will print in very early stage:
	Early serial console at I/O port 0x3f8 (options '9600n8')
	console [uart0] enabled
later for console it will print:
	console handover: boot [uart0] -> real [ttyS0]

Signed-off-by: <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
Yinghai Lu
79492689e4 serial: assert DTR for serial console devices
Some RS-232 devices require DTR to be asserted before they can be used.  DTR
is normally asserted in uart_startup() when the port is opened.  But we don't
actually open serial console ports, so assert DTR when the port is added.

BTW:
earlyprintk and early_uart are hard coded to set DTR/RTS.

rmk says

  The only issue I can think of is the possibility for an attached modem to
  auto-answer or maybe even auto-dial before the system is ready for it to do
  so.  Might have an undesirable cost implication for some running with such a
  setup.

  Apart from that, I can't think of any other side effect of this specific
  patch.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:34 -07:00
David S. Miller
f3c681c028 [SERIAL]: Fix console write locking in sparc drivers.
Mirror the logic in 8250 for proper console write locking
when SYSRQ is triggered or an OOPS is in progress.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:28 -07:00
Linus Torvalds
21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Linus Torvalds
0b9062f6b5 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Rename PC speaker code
  [MIPS] Don't use genrtc.
  [MIPS] Remove unused time.c for swarm
  [MIPS] Sparse: Use NULL for pointer
  [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
  [MIPS] SMTC: Interrupt mask backstop hack
  [MIPS] separate platform_device registration for VR41xx RTC
  [MIPS] Separate platform_device registration for VR41xx GPIO
  [MIPS] MIPSsim: Fix build.
  [MIPS] separate platform_device registration for VR41xx serial interface
  [MIPS] Include cacheflush.h in uncache.c
  [MIPS] Cleanup tlbdebug.h
  [MIPS] Change names of local variables to silence sparse (part 2)
  [MIPS] Workaround for a sparse warning in include/asm-mips/io.h
  [MIPS] RM: Use only phyiscal address for 82596 and 53c710
  [MIPS] Hydrogen3: Remove remaining bits of code.
  [MIPS] DEC: Fix modpost warning.
  Revert "[MIPS] DEC: Fix modpost warning."
  [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12 13:28:54 -07:00
Yoichi Yuasa
891649409e [MIPS] separate platform_device registration for VR41xx serial interface
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:13 +01:00
Roy Huang
f4d640c9be Blackfin serial driver: supporting BF548-EZKIT serial port
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 16:43:46 +08:00
Auke Kok
44c10138fd PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00
Paul Mackerras
bf22f6fe2d Merge branch 'for-2.6.23' into merge 2007-07-11 13:28:26 +10:00
Ishizaki Kou
e34b9c94b6 [POWERPC] of_serial: add port type checking
Currently, of_serial driver supports only 8250 compatible ports, but
prepares that others can easily be added.  Yet unregister routine
assumes port is 8250.  This corrects unregister routine to check
port type.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:42 +10:00
Ishizaki Kou
1558f9b44e [POWERPC] of_serial: Ignore unknown serial port
Current of_serial driver assumes unknown serial port to be 8250.  But
this behavior may cause fatal problems when the serial port is not
8250.  This corrects probe routine to ignore unknown serial port.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:41 +10:00
Kumar Gala
90faf4fa79 [POWERPC] CPM_UART: Use inline function form of eieio
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10 00:33:19 -05:00
Komuro
40738f3fcd PCMCIA-NETDEV : add new ID of lan&modem multifunction card
fmvj18x_cs:
      NEC PK-UG-J001
      Panasonic CF-VML201
      Panasonic TO-PDL9610

pcnet_cs:
       MICRO-RESEARCH  MC336LAN

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Jay Lubomirski
2f4d4da8f8 serial: clear proper MPSC interrupt cause bits
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the
interrupt for both controllers instead of just the one its supposed to.
This can result in the other controller appearing to hang because its
interrupt was effectively lost.

So, don't clear the interrupt cause bits for both MPSC controllers when
clearing the interrupt for one of them.  Just clear the one that is
supposed to be cleared.

Signed-off-by: Jay Lubomirski <jaylubo@motorola.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:29 -07:00
Sonic Zhang
474f1a667d Blackfin arch: kgdb specific code
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-29 16:35:17 +08:00
Paul Mundt
2b1bd1ac5d sh: Preliminary support for the SH-X3 CPU.
This adds basic support for UP SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20 18:27:10 +09:00
Mike Frysinger
19aa6382e3 Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB
as the termios info does not stipulate that the former are dependent on the latter

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 16:16:45 +08:00
Mike Frysinger
cf68676222 Blackfin serial driver: actually implement the break_ctl() function
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 16:12:49 +08:00
Mike Frysinger
9808901b6c Blackfin serial driver: ignore framing and parity errors
if we get a break signal, we want to ignore framing and parity errors
because those will always be set (by nature of the signal)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 15:31:30 +08:00
Mike Frysinger
c16c3ca79a Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPAR
so we can now do spaced/marked parity

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 15:31:30 +08:00
Paul Mundt
05627486ab sh: Fix SH-4 CPU selects.
Now that select no longer works for selecting the "closest" CPU,
we have to explicitly reference the precise sub-type in the few
places where it actually matters (presently only setup code and
some legacy sh-sci cruft).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:40 +00:00
Russell King
db002b8597 [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking
2389b27216 contains a merge bug; fix it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-05 19:39:49 +01:00
Linus Torvalds
f54496f55a Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix some section mismatch warnings
  [ARM] 4417/1: Serial: Fix AMBA drivers locking
  [ARM] 4394/1: ARMv7: Add the TLB range operations
  [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c
  [ARM] 4416/1: NWFPE: fix undeclared symbols
  [ARM] 4415/1: AML5900: fix sparse warnings from map_io
  [ARM] 4414/1: S3C2443: sparse fix for clock.c
  [ARM] 4412/1: S3C2412: reset errata fix
  [ARM] 4411/1: KS8695: Another serial driver fix
  [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init
  [ARM] Fix stacktrace FP range checking
  [ARM] use __used attribute
  [ARM] enable arbitary speed tty ioctls and split input/output speed
  [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h
  [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup
  [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code
  [ARM] 4404/1: Trivial IXP42x Kconfig cleanup
  [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator
  [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller
  [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ
2007-05-30 10:04:01 -07:00
Thomas Gleixner
2389b27216 [ARM] 4417/1: Serial: Fix AMBA drivers locking
The -rt patch triggered a lockdep warning in the amba serial drivers, which never
shows up on UP kernels. On SMP systems this would trigger as well.

Release the port lock before calling tty_flip_buffer_push() and reacquire it after
the call. This matches the code in the 8250 serial driver.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 14:33:01 +01:00
Andrew Victor
486cab2ba2 [ARM] 4411/1: KS8695: Another serial driver fix
Fix a error reported by newer versions of GCC.
error: static declaration of 'ks8695_reg' follows non-static declaration

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:19 +01:00
Jan Engelhardt
b00ccd0f0b [SPARC]: Linux always started with 9600 8N1
The Linux kernel ignored the PROM's serial settings (115200,n,8,1 in
my case). This was because mode_prop remained "ttyX-mode" (expected:
"ttya-mode") due to the constness of string literals when used with
"char *". Since there is no "ttyX-mode" property in the PROM, Linux
always used the default 9600.

[ Investigation of the suncore.s assembler reveals that gcc optimizied
  away the stores, yet did not emit a warning, which is a pretty
  anti-social thing to do and is the only reason this bug lived for
  so long -DaveM ]

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:50:07 -07:00
Krzysztof Helt
9977e390dd [SERIAL] sunzilog: section mismatch fix
This patch fixes section mismatch warnings in the sunzilog driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:49:17 -07:00
Linus Torvalds
d07b3c2532 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] spelling fixes
  [ARM] at91_adc parenthesis balance
  [ARM] 4400/1: S3C24XX: Add high-speed MMC device definition
  [ARM] 4399/2: S3C2443: Fix SMDK2443 nand timings
  [ARM] 4398/1: S3C2443: Fix watchdog IRQ number
  [ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguity
  [ARM] 4396/1: S3C2443: Add missing HCLK clocks
  [ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machines
  [ARM] 4388/1: no need for arm/mm mmap range checks for non-mmu
  [ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 parts
  [ARM] ARMv6: add CPU_HAS_ASID configuration
  [ARM] integrator: fix pci_v3 compile error with DEBUG_LL
  [ARM] gic: Fix gic cascade irq handling
  [ARM] Silence OMAP kernel configuration warning
  [ARM] Update ARM syscalls
  [ARM] 4384/1: S3C2412/13 SPI registers offset correction
  [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files
  [ARM] 4382/1: iop13xx: fix msi support
  [ARM] Remove Integrator/CP SMP platform support
  [ARM] 4378/1: KS8695: Serial driver fix
  ...
2007-05-21 10:00:22 -07:00
Mike Frysinger
2ac5ee4738 Blackfin serial driver: implement support for ignoring parity/break errors
properly setting up and respecting the read_status_mask / ignore_status_mask fields of the serial core

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:50:23 -07:00
Aubrey Li
5c4e472b0a Blackfin serial driver: fix overhead issue
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:50:23 -07:00
David Woodhouse
b5b82df6f4 NS16550A: Restore HS settings in EXCR2 on resume
After a suspend/resume cycle, the UART may have been reset into
low-speed mode -- either because it's actually been reset, or because
the firmware pokes at the old-style divisor registers. If we detected it
as a NS16550A SuperIO chip in the first place and set baud_base to
921600, then we should do so again in the resume path.

This patch adds that code to serial8250_resume_port(), and also makes
serial8250_resume() actually call serial8250_resume_port() for each port
instead of just calling uart_resume_port() directly. And thus fixes
serial port operation after suspend/resume.

It also fixes a bogus comment where we write the EXCR2 register with a
comment saying /* EXCR1 */

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:25:49 -07:00
wendy xiong
bc88d5d4e1 icom: add new sub-device-id to support new adapter
This patch add new sub-device-id to support new adapter and changed the
interrupt irq number for unsigned char to unsigned int.

[akpm@osdl.org: fix whitespace in device table]
Signed-off by: Wendy Xiong <wendyx@us.ibm.com>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:23:05 -07:00
Andrew Victor
e45c7a4382 [ARM] 4378/1: KS8695: Serial driver fix
A fix for a really stupid typo in the KS8695 serial driver.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16 15:35:25 +01:00
David S. Miller
c7754d465b [SPARC64]: Add hypervisor API negotiation and fix console bugs.
Hypervisor interfaces need to be negotiated in order to use
some API calls reliably.  So add a small set of interfaces
to request API versions and query current settings.

This allows us to fix some bugs in the hypervisor console:

1) If we can negotiate API group CORE of at least major 1
   minor 1 we can use con_read and con_write which can improve
   console performance quite a bit.

2) When we do a console write request, we should hold the
   spinlock around the whole request, not a byte at a time.
   What would happen is that it's easy for output from
   different cpus to get mixed with each other.

3) Use consistent udelay() based polling, udelay(1) each
   loop with a limit of 1000 polls to handle stuck hypervisor
   console.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-15 20:23:02 -07:00
David S. Miller
7a05b591a3 [SERIAL] SUNHV: Add an ID string.
The 'compatible' property can be SUNW,sun4v-console as
well as 'qcn'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-13 21:27:37 -07:00
Andrew Victor
2c7ee6ab7c [ARM] 4332/2: KS8695: Serial driver
A driver for the KS8695 internal UART.

Based on the 2.6.9 driver from Micrel.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 22:02:52 +01:00
Russell King
10bdaaa0fa [ARM] ecard: add ecardm_iomap() / ecardm_iounmap()
Add devres ecardm_iomap() and ecardm_iounmap() for Acorn expansion
cards.  Convert all expansion card drivers to use them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 17:19:02 +01:00
Linus Torvalds
62933d36ac Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Fix compile error with kexec and CONFIG_SMP=n
  [POWERPC] Split initrd logic out of early_init_dt_scan_chosen() to fix warning
  [POWERPC] Fix warning in hpte_decode(), and generalize it
  [POWERPC] Minor pSeries IOMMU debug cleanup
  [POWERPC] PS3: Fix sys manager build error
  [POWERPC] Assorted janitorial EEH cleanups
  [POWERPC] We don't define CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
  [POWERPC] pmu_sys_suspended is only defined for PPC32
  [POWERPC] Fix incorrect calculation of I/O window addresses
  [POWERPC] celleb: Update celleb_defconfig
  [POWERPC] celleb: Fix parsing of machine type hack command line option
  [POWERPC] celleb: Fix PCI config space accesses to subordinate buses
  [POWERPC] celleb: Fix support for multiple PCI domains
  [POWERPC] Wire up sys_utimensat
  [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
  [POWERPC] User rheap from arch/powerpc/lib
  [POWERPC] 83xx: Fix the PCI ranges in the MPC834x_MDS device tree.
  [POWERPC] 83xx: Fix the PCI ranges in the MPC832x_MDS device tree.
  [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termios
  [POWERPC] Change rheap functions to use ulongs instead of pointers
  ...
2007-05-10 13:32:24 -07:00
Linus Torvalds
0ab598099c Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Use alloc_pci_dev() in PCI bus probes.
  [SPARC64]: Bump PROMINTR_MAX to 32.
  [SPARC64]: Fix recursion in PROM tree building.
  [SERIAL] sunzilog: Interrupt enable before ISR handler installed
  [SPARC64] PCI: Consolidate PCI access code into pci_common.c
2007-05-10 13:32:05 -07:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Kumar Gala
32a56ebb24 [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
cpm_uart_init_portdesc is referenced from non-init code and thus we were
getting the following warning:

WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:cpm_uart_init_portdesc from .text between 'cpm_uart_init' (at offset 0x18020) and 'cpm_uart_drv_remove'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:44:58 -05:00
Scott Wood
1bda8f3056 [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termios
This eliminates some warnings.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:05:48 -05:00
Timur Tabi
4c35630ccd [POWERPC] Change rheap functions to use ulongs instead of pointers
The rheap allocation functions return a pointer, but the actual value is based
on how the heap was initialized, and so it can be anything, e.g. an offset
into a buffer.  A ulong is a better representation of the value returned by
the allocation functions.

This patch changes all of the relevant rheap functions to use a unsigned long
integers instead of a pointer.  In case of an error, the value returned is
a negative error code that has been cast to an unsigned long.  The caller can
use the IS_ERR_VALUE() macro to check for this.

All code which calls the rheap functions is updated accordingly.  Macros
IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE().

Also added error checking to rh_attach_region().

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:01:43 -05:00
Mark Fortescue
7cc5c8559c [SERIAL] sunzilog: Interrupt enable before ISR handler installed
This patch changes the interrupt enable sequence for the sunzilog driver 
so that interrupts are not enabled untill after the interrupt handler has 
been installed. If this is not done, some SS1 and SS2 sun4c systems panic 
on un-handled interrupt before the handler gets installed preventing boot.

It also adds in support for the ESCC version of the zilog chips. The
changes mean that the FIFO will be enabled for ESCC versions of the
SCC UART. My interpretation of the SCC manual and the existing interrupt
handler code is that it sould be able to make good use of the FIFO without
issues.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 13:49:04 -07:00
Linus Torvalds
df6d3916f3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
  [POWERPC] Abolish powerpc_flash_init()
  [POWERPC] Early serial debug support for PPC44x
  [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
  [POWERPC] Add device tree for Ebony
  [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
  [POWERPC] MPIC U3/U4 MSI backend
  [POWERPC] MPIC MSI allocator
  [POWERPC] Enable MSI mappings for MPIC
  [POWERPC] Tell Phyp we support MSI
  [POWERPC] RTAS MSI implementation
  [POWERPC] PowerPC MSI infrastructure
  [POWERPC] Rip out the existing powerpc msi stubs
  [POWERPC] Remove use of 4level-fixup.h for ppc32
  [POWERPC] Add powerpc PCI-E reset API implementation
  [POWERPC] Holly bootwrapper
  [POWERPC] Holly DTS
  [POWERPC] Holly defconfig
  [POWERPC] Add support for 750CL Holly board
  [POWERPC] Generalize tsi108 PCI setup
  [POWERPC] Generalize tsi108 PHY types
  ...

Fixed conflict in include/asm-powerpc/kdebug.h manually

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:50:19 -07:00
Bjorn Helgaas
7e92b4fc34 x86, serial: convert legacy COM ports to platform devices
Make x86 COM ports into platform devices and don't probe for them
if we have PNP.

This prevents double discovery, where a device was found both by
the legacy probe and by 8250_pnp, e.g.,

    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

This also means IRDA devices without a UART PNP ID will no longer be
claimed by the serial driver, which might require changes in IRDA
drivers and administration.

In addition to this patch, you may need to configure a setserial init
script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART
stuff back in.  On Debian, "dpkg-reconfigure setserial" with the "kernel"
option does this.

To force the old legacy probe behavior even when we have PNPBIOS or
ACPI, load the new legacy_serial module (or build 8250 static) with
the "legacy_serial.force" option.

[akpm@linux-foundation.org: fix makefiles]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Keith Owens <kaos@ocs.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Russell King <rmk+serial@arm.linux.org.uk>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:23 -07:00
Josh Boyer
fef92c30d4 8250: Remove commented out irq cruft
Remove some obviously old interrupt disable/enable code that has been
commented out.

Signed-off-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:15 -07:00
Atsushi Nemoto
a4bb27d99c serial_txx9: zap changelog from source code
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:12 -07:00
Atsushi Nemoto
07bafde351 serial_txx9: Use assigned device numbers
The serial_txx9 driver have abused device numbers (major 4, minor 128) if
CONFIG_SERIAL_TXX9_STDSERIAL was not set.  This patch makes the driver use
proper device numbers assigned for it (major 204, minor 196-203).  I
suppose a typical user of this driver set CONFIG_SERIAL_TXX9_STDSERIAL to Y
(i.e.  use "ttyS0"), so this patch would not cause big compatibility issue.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:12 -07:00
Milind Arun Choudhary
076fa0fa2d SPIN_LOCK_UNLOCKED cleanup in drivers/serial
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:11 -07:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Len Sorensen
e97cb3e28c Subject: jsm driver fix for linuxpps support
The jsm driver doesn't currently use the uart_handle_*_change helper
functions, which are the obvious place for things like linuxpps to tie
into (which it now does of course), and as a result the jsm driver can
not be used with linuxpps and anything else that ties into the
serial_core helper functions.  This patch adds calls to these helper
functions whenever the value they manage changes.  That actual storage
of the state is not modified since the jsm driver caches the current
settings (The 8250 driver reads them everytime a user asks for the
state), and only updates them whenever they change.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:03 -07:00
Len Sorensen
3c04c27251 Small fixes for jsm driver
The jsm driver fails when you try to use the TIOCSSERIAL ioctl.  The reason
is that the driver never sets uart_port.uartclk, causing the data received
using TIOCGSERIAL to not match the internal state of the driver.  This
patch fixes this problem by settings the uartclk to the value used by the
serial_core (16 times the baud base).

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:03 -07:00
Paul Mackerras
02bbc0f09c Merge branch 'linux-2.6' 2007-05-08 13:37:51 +10:00
Linus Torvalds
ef93127e4c Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SERIAL] sunsu: Fix section mismatch warnings.
  [SPARC64]: pgtable_cache_init() should be __init.
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/prom.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/pci.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/console.c
  [MM]: sparse_init() should be __init.
  [SPARC64]: Update defconfig.
  [VIDEO]: Add Sun XVR-2500 framebuffer driver.
  [VIDEO]: Add Sun XVR-500 framebuffer driver.
  [SPARC64]: SUN4U PCI-E controller support.
  [SPARC]: Fix comment typo in smp4m_blackbox_current().
  [SCSI] SUNESP: sun_esp.c needs linux/delay.h

Fix up conflict in arch/sparc64/mm/init.c manually due to removal of
pgtable_cache_init() through the -mm patches (even though that patch was
also by David ;)

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:22:48 -07:00
Linus Torvalds
5b6b549822 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (38 commits)
  sh: R7785RP board updates.
  sh: Update r7780rp defconfig.
  sh: Add die chain notifiers.
  sh: Fix APM emulation on hp6xx.
  sh: Wire up more IRQs for SH7709.
  sh: Solution Engine 7722 board support.
  sh: Fix r7780rp build.
  sh: kdump support.
  sh: Move clock reporting to its own proc entry.
  sh: Solution Engine SH7705 board and CPU updates.
  serial: sh-sci: Fix module clock refcount for serial console.
  serial: sh-sci: Fix module clock refcounting.
  sh: SH7722 clock framework support.
  sh: hp6xx pata_platform support.
  sh: Obey CONFIG_HZ for HZ definition.
  sh: Fix fstatat64() syscall.
  sh: se7780 PCI support.
  sh: SH7780 Solution Engine board support.
  sh: Add a dummy SH-4 PCIC fixup.
  sh: Tidy up L-BOX area5 addresses.
  ...
2007-05-07 12:17:40 -07:00
Robert P. J. Day
c65808ef76 remove unused header file: drivers/serial/crisv10.h
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:00 -07:00
Bryan Wu
194de56127 blackfin: serial driver
This patch implements the driver necessary use the Analog Devices Blackfin
processor's Serial Port.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:58 -07:00
Jiri Slaby
eb3a1e1145 Serial: serial_core, use pr_debug
serial_core, use pr_debug

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:51 -07:00
Dave Jiang
1733310bb7 MPSC serial driver tx locking
The MPSC serial driver assumes that interrupt is always on to pick up the
DMA transmit ops that aren't submitted while the DMA engine is active.
However when irqs are off for a period of time such as operations under
kernel crash dump console messages do not show up due to additional DMA ops
are being dropped.  This makes console writes to process through all the tx
DMAs queued up before submitting a new request.

Also, the current locking mechanism does not protect the hardware registers
and ring buffer when a printk is done during the serial write operations.
The additional per port transmit lock provides a finer granular locking and
protects registers being clobbered while printks are nested within UART
writes.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
David Gibson
abb4a23907 serial: define FIXED_PORT flag for serial_core
At present, the serial core always allows setserial in userspace to change the
port address, irq and base clock of any serial port.  That makes sense for
legacy ISA ports, but not for (say) embedded ns16550 compatible serial ports
at peculiar addresses.  In these cases, the kernel code configuring the ports
must know exactly where they are, and their clocking arrangements (which can
be unusual on embedded boards).  It doesn't make sense for userspace to change
these settings.

Therefore, this patch defines a UPF_FIXED_PORT flag for the uart_port
structure.  If this flag is set when the serial port is configured, any
attempts to alter the port's type, io address, irq or base clock with
setserial are ignored.

In addition this patch uses the new flag for on-chip serial ports probed in
arch/powerpc/kernel/legacy_serial.c, and for other hard-wired serial ports
probed by drivers/serial/of_serial.c.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
Thomas Koeller
bd71c182d5 RM9000 serial driver
Add support for the integrated serial ports of the MIPS RM9122 processor
and its relatives.

The patch also does some whitespace cleanup.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
Marc St-Jean
beab697ab4 serial driver PMC MSP71xx
Serial driver patch for the PMC-Sierra MSP71xx devices.

There are three different fixes:

1 Fix for DesignWare APB THRE errata: In brief, this is a non-standard
  16550 in that the THRE interrupt will not re-assert itself simply by
  disabling and re-enabling the THRI bit in the IER, it is only re-enabled
  if a character is actually sent out.

  It appears that the "8250-uart-backup-timer.patch" in the "mm" tree
  also fixes it so we have dropped our initial workaround.  This patch now
  needs to be applied on top of that "mm" patch.

2 Fix for Busy Detect on LCR write: The DesignWare APB UART has a feature
  which causes a new Busy Detect interrupt to be generated if it's busy
  when the LCR is written.  This fix saves the value of the LCR and
  rewrites it after clearing the interrupt.

3 Workaround for interrupt/data concurrency issue: The SoC needs to
  ensure that writes that can cause interrupts to be cleared reach the UART
  before returning from the ISR.  This fix reads a non-destructive register
  on the UART so the read transaction completion ensures the previously
  queued write transaction has also completed.

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
Grant Likely
a348119778 [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console
If the serial port gets shut down, then console output stalls.  9 out
of 10 kernel hackers agree, this is a bad thing.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Stephen Rothwell
55b61fec22 [POWERPC] Rename device_is_compatible to of_device_is_compatible
for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
David S. Miller
90a660a454 [SERIAL] sunsu: Fix section mismatch warnings.
Mark sunsu_console_setup() as __init and rename 'sunsu_cons'
to 'sunsu_console' so that it matches modpost.c's whitelist.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-07 00:14:13 -07:00
Paul Mundt
005a336e71 serial: sh-sci: Fix module clock refcount for serial console.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
dmitry pervushin
1534a3b3dc serial: sh-sci: Fix module clock refcounting.
This adds the enable/disable hooks for the port clock to sh-sci.

Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Nobuhiro Iwamatsu
9465a54fa4 sh: MS7712SE01 board support.
Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt
8248daac6b serial: sh-sci: Kill off breakpoint in break IRQ.
With the GDB stub being entered via a special sysrq trigger,
we don't want to hit it directly from sci_br_interrupt().
Without this, there is access to the other sysrq triggers when
kgdb is enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
fa5da2f7bd sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Linus Torvalds
c6799ade4a Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...
2007-05-06 13:20:10 -07:00
Russell King
6f95416ebe Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', 'ns9xxx', 'omap', 'pxa', 'rpc', 's3c' and 'sa1100' into devel 2007-05-06 20:57:51 +01:00
Sascha Hauer
ff4bfb2163 [ARM] 4328/1: Move i.MX UART regs to driver
This patch moves the i.MX UART register descriptions from
include/asm-arm/arch-imx/imx-regs.h to the serial driver itself.
This helps using the driver on other architectures like mx31

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03 20:24:21 +01:00
Andrew Victor
03abeac0a2 [ARM] 4357/1: AT91: Support slower serial baud-rates
Allow slower serial baud-rates by switching the UART clock from MCK to
MCK/8.

Based on patches by Mike Wolfram and Russell King.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03 14:12:45 +01:00
Stephen Rothwell
40cd3a4564 [POWERPC] Rename get_property to of_get_property: drivers
These are all the remaining instances of get_property.  Simple rename of
get_property to of_get_property.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:32 +10:00
Paul Mackerras
49e1900d4c Merge branch 'linux-2.6' into for-2.6.22 2007-04-30 12:38:01 +10:00
Paul Mackerras
a48141db68 Revert "[POWERPC] Rename get_property to of_get_property: drivers"
This reverts commit d05c7a80cf,
which included changes which should go via other subsystem
maintainers.
2007-04-26 22:24:31 +10:00
Stephen Rothwell
ccf0dec6fc [SPARC/64] constify of_get_property return: drivers
The only unfortunate bit here is that the name field of struct map_info
is not const, so for now we put a cast on the assignment of it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:27 -07:00
Jiri Kosina
4bf3631cdb 8250: fix possible deadlock between serial8250_handle_port() and serial8250_interrupt()
Commit 40b36daa introduced possibility that serial8250_backup_timeout() ->
serial8250_handle_port() locks port.lock without disabling irqs, thus
allowing deadlock against interrupt handler (port.lock is acquired in
serial8250_interrupt()).

Spotted by lockdep.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:09 -07:00
Jiri Slaby
98f85d30ce Char: icom, mark __init as __devinit
Two functions are called from __devinit context, but they are marked as
__init. Fix this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:09 -07:00
Olaf Hering
179fb0c726 do not truncate irq number for icom adapter
irq values are u32, not u8. Large irq numbers will be truncated,
free_irq may free a different irq.

Remove incorrectly sized struct member and use the one from pci_dev.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:08 -07:00
Taku Izumi
fdc30b3d44 Fix possible NULL pointer access in 8250 serial driver
I encountered the following kernel panic.  The cause of this problem was
NULL pointer access in check_modem_status() in 8250.c.  I confirmed this
problem is fixed by the attached patch, but I don't know this is the
correct fix.

sadc[4378]: NaT consumption 2216203124768 [1]
Modules linked in: binfmt_misc dm_mirror dm_mod thermal processor fan
container button sg e100 eepro100 mii ehci_hcd ohci_hcd

    Pid: 4378, CPU 0, comm: sadc
    psr : 00001210085a2010 ifs : 8000000000000289 ip : [<a000000100482071>]
    Not tainted
    ip is at check_modem_status+0xf1/0x360

    Call Trace:
    [<a000000100013940>] show_stack+0x40/0xa0
    [<a0000001000145a0>] show_regs+0x840/0x880
    [<a0000001000368e0>] die+0x1c0/0x2c0
    [<a000000100036a30>] die_if_kernel+0x50/0x80
    [<a000000100037c40>] ia64_fault+0x11e0/0x1300
    [<a00000010000bdc0>] ia64_leave_kernel+0x0/0x280
    [<a000000100482070>] check_modem_status+0xf0/0x360
    [<a000000100482300>] serial8250_get_mctrl+0x20/0xa0
    [<a000000100478170>] uart_read_proc+0x250/0x860
    [<a0000001001c16d0>] proc_file_read+0x1d0/0x4c0
    [<a0000001001394b0>] vfs_read+0x1b0/0x300
    [<a000000100139cd0>] sys_read+0x70/0xe0
    [<a00000010000bc20>] ia64_ret_from_syscall+0x0/0x20
    [<a000000000010620>] __kernel_syscall_via_break+0x0/0x20

Fix the possible NULL pointer access in check_modem_status() in 8250.c.  The
check_modem_status() would access 'info' member of uart_port structure, but it
is not initialized before uart_open() is called.  The check_modem_status() can
be called through /proc/tty/driver/serial before uart_open() is called.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi2005@soft.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:07 -07:00
Stephen Rothwell
30686ba6d5 [POWERPC] Remove old interface find_devices
Replace uses with of_find_node_by_name and for_each_node_by_name.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:09:02 +10:00
Russell King
ed519dede3 [ARM] Convert AMBA PL010 driver to use the clk infrastructure
Convert the AMBA PL010 serial driver to use the clock infrastructure
to allow EP93xx platforms to properly gate the clock to the UARTs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-22 12:30:41 +01:00
Russell King
1b0646a033 [ARM] Convert AMBA PL010 driver to use 'uart_amba_port'
Use a pointer to struct uart_amba_port throughout the driver
rather than a mixture of that and struct uart_port.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-22 11:55:59 +01:00
Eric Miao
7053acbd78 [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that

	CKEN0_PWM0 --> CKEN_PWM0
	CKEN1_PWM1 --> CKEN_PWM1
	...
	CKEN24_CAMERA --> CKEN_CAMERA

The reasons for the change of these defitions are:

1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24

2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for

3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off

Another change in the patch is to make the definitions equal to its
clock bit index, so that

   #define CKEN_CAMERA  (24)

instead of

   #define CKEN_CAMERA  (1 << 24)

this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 23:14:01 +01:00
Stephen Rothwell
d05c7a80cf [POWERPC] Rename get_property to of_get_property: drivers
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Danny Kukawka
6149dd5cfa [PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c
Adds device ids of two Fujitsu Siemens Tablet PCs to pnp_dev_table

Signed-off-by: Danny Kukawka <dkukawka@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 11:01:22 -07:00
Paul Mundt
0b3d4ef6fe serial: Fix sh-sci break interrupt/sysrq handling.
The sh-sci sci_br_interrupt() handler was failing to call
in to uart_handle_break(), which was something that only
the SH-3 path was doing, fix that up.

Additionally, SUPPORT_SYSRQ seems to have moved down too
far, move it back to the top so uart_handle_break() and
friends aren't no-ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14 13:22:37 +09:00
Pat Gefre
f70c81d4dd [PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage
The sn console driver was snagged by the use of CONFIG_DEBUG_SHIRQ!

The request_irq() immediate call to the interrupt handler caused
another attempt to lock the port lock - deadlock.

This is a patch to fix that.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-08 07:39:15 -08:00
Greg Ungerer
28580df03e [PATCH] m68knommu: fix work queues in mcfserial.c driver
Fix work queue code to support new model.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06 18:08:38 -08:00
Greg Ungerer
ebfcfef44e [PATCH] m68knommu: set GPIO lines for serial ports on 5282 in mcfserial.c
For the Freescale M5282 ColdFire,
Port UA Pin Assignment Register should set to UART mode.
Patch submitted by David Wu <davidwu@arcturusnetworks.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06 18:08:38 -08:00
Maciej W. Rozycki
de320199c0 [PATCH] dz: remove struct pt_regs references
Remove remaining references to saved registers now that
uart_handle_sysrq_char() does not want them.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 07:57:51 -08:00
Linus Torvalds
b0138a6cb7 Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits)
  [PARISC] Use symbolic last syscall in __NR_Linux_syscalls
  [PARISC] Add missing statfs64 and fstatfs64 syscalls
  Revert "[PARISC] Optimize TLB flush on SMP systems"
  [PARISC] Compat signal fixes for 64-bit parisc
  [PARISC] Reorder syscalls to match unistd.h
  Revert "[PATCH] make kernel/signal.c:kill_proc_info() static"
  [PARISC] fix sys_rt_sigqueueinfo
  [PARISC] fix section mismatch warnings in harmony sound driver
  [PARISC] do not export get_register/set_register
  [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code
  [PARISC] convert to use CONFIG_64BIT instead of __LP64__
  [PARISC] use CONFIG_64BIT instead of __LP64__
  [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro
  [PARISC] more ENTRY(), ENDPROC(), END() conversions
  [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc
  [PARISC] Fixes /proc/cpuinfo cache output on B160L
  [PARISC] implement standard ENTRY(), END() and ENDPROC()
  [PARISC] kill ENTRY_SYS_CPUS
  [PARISC] clean up debugging printks in smp.c
  [PARISC] factor syscall_restart code out of do_signal
  ...

Fix conflict in include/linux/sched.h due to kill_proc_info() being made
publicly available to PARISC again.
2007-02-26 12:48:06 -08:00
Atsushi Nemoto
0970769ace [SERIAL] serial_txx9 driver update
* Use platform_device.
 * Fix and cleanup suspend/resume/initialization codes.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-22 00:50:45 +00:00
Thomas Koeller
cc79aa9d28 [PATCH] 8250: Fix GCC4 signed/unsigned mismatch warning
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:15 -08:00
Linus Torvalds
59b8175c77 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits)
  [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports
  [ARM] 4140/1: AACI stability add ac97 timeout and retries
  [ARM] 4139/1: AACI record support
  [ARM] 4138/1: AACI: multiple channel support for IRQ handling
  [ARM] 4211/1: Provide a defconfig for ns9xxx
  [ARM] 4210/1: base for new machine type "NetSilicon NS9360"
  [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM
  [ARM] 4221/1: S3C2443: DMA support
  [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev
  [ARM] 4219/1: S3C2443: DMA source definitions
  [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443
  [ARM] 4217/1: S3C24XX: remove the dma channel show at startup
  [ARM] 4090/2: avoid clash between PXA and SA1111 defines
  [ARM] 4216/1: add .gitignore entries for ARM specific files
  [ARM] 4214/2: S3C2410: Add Armzone QT2410
  [ARM] 4215/1: s3c2410 usb device:  per-platform vbus_draw
  [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST
  [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos
  [ARM] 4137/1: Add kexec support
  [ARM] 4201/1: SMP barriers pair needed for the secondary boot process
  ...

Fix up conflict due to typedef removal in sound/arm/aaci.h
2007-02-19 13:18:39 -08:00
Linus Torvalds
5c56f46683 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (34 commits)
  [POWERPC] 86xx: Cleaned up platform dts files
  [POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards
  [POWERPC] 85xx: Cleaning up machine probing
  [POWERPC] QE: clean up ucc_slow.c and ucc_fast.c
  [POWERPC] 85xx: Cleaned up platform dts files
  [POWERPC] 83xx: Renamed MPC8323 MDS dts and defconfig to match other boards
  [POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDS
  [POWERPC] 83xx: Use of_platform_bus_probe to setup QE devices
  [POWERPC] 83xx: use default value of loops_per_jiffy
  [POWERPC] 83xx: Remove obsolete setting of ROOT_DEV.
  [POWERPC] 83xx: Cleaning up machine probing and board initcalls
  [POWERPC] Dispose irq mapping when done in mpc52xx_serial.c
  [POWERPC] 86xx: Add missing of_node_put() in mpc86xx_hpcn_init_irq().
  [POWERPC] 8[56]xx: Remove obsolete setting of ROOT_DEV for 85xx and 86xx platforms.
  [POWERPC] pseries: Enabling auto poweron after power is restored.
  [POWERPC] use winbond libata instead of ide driver for pseries CD drives
  [POWERPC] powerpc: remove references to the obsolete linux,platform property
  [POWERPC] add of_get_mac_address and update fsl_soc.c to use it
  [POWERPC] 83xx: Cleaned up 83xx platform dts files
  [POWERPC] Fix bug with early ioremap and 64k pages
  ...
2007-02-19 13:05:14 -08:00
Russell King
f69eda00d4 Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale trees 2007-02-17 20:09:53 +00:00
Sylvain Munaut
fc7900bb04 [POWERPC] Dispose irq mapping when done in mpc52xx_serial.c
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-17 18:20:18 +11:00
Kyle McMartin
e7b3ca0854 Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git
Conflicts:

	arch/parisc/hpux/sys_hpux.c
	arch/parisc/mm/ioremap.c
2007-02-17 00:18:23 -05:00
Sergei Organov
bb289bc46f serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.
Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.

Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:16 -08:00
Paul Gortmaker
0f9ec0a828 [POWERPC] Fix compile failure in cpm_uart_cpm2
Fix bug that exists in kernel.org since 2.6.17rc4 - compiles fail if
CONFIG_SERIAL_CPM_SMC is defined.  Tested on a board using SMC1 console.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-16 14:00:19 +11:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Vitaly Wool
de8211b96b [PATCH] PNX8550 UART driver
Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Burman Yan
8f31bb39ec [PATCH] serial: replace kmalloc+memset with kzalloc
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
George G. Davis
3689a0ec60 [PATCH] serial: make sure UART is powered up when dumping MCTRL status
Since serial devices are powered down when not in use and some of those
devices cannot be accessed when powered down, we need to enable power
around calls to get_mcrtl() when dumping port state via uart_line_info().
This resolves hangs observed on some machines while reading serial device
registers when a port is powered off.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Bjorn Helgaas
9b22271d4b [PATCH] serial: trivial code flow simplification
Return failure immediately, so we don't have to test it twice.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Alex Williamson
40b36daad0 [PATCH] 8250 UART backup timer
The patch below works around a minor bug found in the UART of the remote
management card used in many HP ia64 and parisc servers (aka the Diva
UARTs).  The problem is that the UART does not reassert the THRE interrupt
if it has been previously cleared and the IIR THRI bit is re-enabled.  This
can produce a very annoying failure mode when used as a serial console,
allowing a boot/reboot to hang indefinitely until an RX interrupt kicks it
into working again (ie.  an unattended reboot could stall).

To solve this problem, a backup timer is introduced that runs alongside the
standard interrupt driven mechanism.  This timer wakes up periodically,
checks for a hang condition and gets characters moving again.  This backup
mechanism is only enabled if the UART is detected as having this problem,
so systems without these UARTs will have no additional overhead.

This version of the patch incorporates previous comments from Pavel and
removes races in the bug detection code.  The test is now done before the
irq linking to prevent races with interrupt handler clearing the THRE
interrupt.  Short delays and syncs are also added to ensure the device is
able to update register state before the result is tested.

Aristeu says:

  this was tested on the following HP machines and solved the problem:
  rx2600, rx2620, rx1600 and rx1620s.

hpa says:

  I have seen this same bug in soft UART IP from "a major vendor."

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Arnd Bergmann
8d38a5b2fa [POWERPC] Open Firmware serial port driver
This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:04 +11:00
Grant Likely
e3aba81d15 [POWERPC] Fixup mp5200 drivers to match device tree changes
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Haavard Skinnemoen
544fc7283c [PATCH] atmel_serial: Use __raw I/O register access
Access to chip-internal registers should always be native-endian.  This is
especially important for AVR32 since it's a big-endian architecture and the
non-raw readl() and writel() macros are defined to do little-endian
accesses.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:29 -08:00
Matthias Fuchs
a9cccd3437 [PATCH] serial: support for new board
Add support for the CPCI-ASIO4 quad port CompactPCI UART board from
electronic system design gmbh.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:33 -08:00
Thomas Hoehn
482120084d [PATCH] Perle multimodem card (PCI-RAS) detection
Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver.  It
may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for
testing.

Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:33 -08:00
Atsushi Nemoto
138c5d258c [PATCH] serial: serial_txx9 driver update
Update the serial_txx9 driver.

 * Configurable manumum port number. (SERIAL_TXX9_NR_UARTS)
 * Remove some code which is unneeded if CONFIG_PM=n.
 * Use PCI_DEVICE() for pci device id table and make it const.
 * Do not include <asm/irq.h>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:27 -08:00
Jiri Slaby
b963a8441c [PATCH] Char: tty_wakeup cleanup
tty_wakeup cleanup

- remove wake_up_interruptible(&tty->write_wait) surrounding
  tty_wakup(tty);
- substitute tty->ldisc.write_wakeup(tty) + wake_up() by tty_wakeup(tty);

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:26 -08:00
Brent Casavant
52c9ae0ac7 [PATCH] IOC3/IOC4: PCI mem space resources
The SGI IOC3 and IOC4 PCI devices implement memory space apertures, not I/O
space apertures.  Use the appropriate region management functions.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Stanislaw Skowronek <skylark@linux-mips.org>
Cc: Brent Casavant <bcasavan@sgi.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:25 -08:00
Lennert Buytenhek
00584719b5 [ARM] amba-pl010: add reference to ep93xx to Kconfig help entry
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:46:26 +00:00
Pavel Pisa
d7ea10d9cb [ARM] i.MX serial: fix IRQ allocation
If RTS interrupt is caused by RTS senzing logic inside i.MX UART module the
IRQ type cannot be set.

It applies only for interrupts going through GPIO layer.  The problem has
been noticed by Konstantin Kletschke some time ago.

  No IRQF_TRIGGER set_type function for IRQ 26 (MPU)

I would not change type to fixed 0, because it could be possible to use
different GPIO MX1 pin for RTS in the theory.  On the other hand it is only
for documentation purposes now, because RTS read code would have to be
adjusted in such case.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:46:23 +00:00
Sascha Hauer
8c0b254b7e [ARM] i.MX serial: fix tx buffer overflows
Fix occasional tx buffer overflows in the i.MX serial driver which came
from the fact that space in the buffer was checked after sending the first
byte.  Also, fifosize is 32 bytes, not 8.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:46:19 +00:00
Al Viro
b81831c69a [PATCH] drivers/serial NULL noise removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:06 -08:00
Andrew Victor
93a3ddc201 [ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.h
The Atmel AT91 and AVR32 processor architectures share many of the same
peripherals.  The PDC (Peripheral Data Controller) registers are also
implemented within in a number of the on-chip peripherals (eg, USART,
MMC, SPI, SSC, etc).

In a attempt not to duplicate the register definitions in each
peripheral, or in each architecture, the at91_pdc.h header in
asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with
linux/atmel_pdc.h.

The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*,
and the drivers updated accordingly.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 15:13:47 +00:00
Paul Mackerras
8423200553 Merge branch 'linux-2.6' 2007-02-07 14:05:13 +11:00
Vitaly Bordug
5427828e83 [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:

- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
  initial commit,
- new solely-powerpc header file for 8260 family (was using one from
  arch/ppc, this one cleaned up from the extra stuff), in fact for now
  a placeholder to get the board-specific includes for stuff not yet
  capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug
f25222b995 [POWERPC] cpm_uart: OF-related fix for CPM1
This makes cpm uart able to work using OF-passed parameters
in case of CPM stuff (found on most mpc8xx reference and custom
boards). The idea is to keep ppc stuff working yet making it able to be
used for powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 12:00:32 +11:00
Russell King
d28122a587 [ARM] Fix AMBA serial drivers for non-first serial ports
Using console=ttyAM1 or console=ttyAMA1 resulted in an oops during
boot due to trying to drive the console before that port had been
registered.  Fix this by checking whether the port is present before
allowing console setup to proceed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-24 11:59:57 +00:00
Andrew Victor
9b93816690 [ARM] 4088/1: AT91: Unbalanced IRQ in serial driver suspend/resume
This patch fixes the unbalanced calls to enable_irq_wake() and
disable_irq_wake() in the AT91 (and AVR32) serial driver.

It should resolve these kernel messages:
  Unbalanced IRQ x wake disable
  BUG: warning at kernel/irq/manage.c:167/set_irq_wake()

Original patch from Marc Pignat.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-24 11:59:55 +00:00
Andrew Victor
a14d527306 [ARM] 4086/1: AT91: Whitespace cleanup
A couple of whitespace cleanups, mainly in the AT91 header files.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-24 11:59:55 +00:00
Vivek Goyal
118c0ace1b [PATCH] x86-64: modpost add more symbols to whitelist pattern2
o MODPOST generates warning for i386 if compiled with CONFIG_RELOCATABLE=y
  and serial console support is enabled.

o Serial console setup function, serial8250_console_setup(), is a non __init
  function and it calls functions which are of type __init().
  (uart_parse_options() and uart_set_options()). Assuming, setup will
  be called during init time, changing serial8250_console_setup() to __init.

o Adding one more pattern to modpost whitelist. Console drivers might
  have *_console structures containing references to setup functions which
  can be of __init type. Don't generate warnings for those.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'serial8250_console' (at offset 0xc05a33d8) and 'serial8250_reg'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-01-11 01:52:44 +01:00
Grant Likely
c98750c2eb [POWERPC] Fix mpc52xx serial driver to work for arch/ppc again
The mpc52xx_uart_of_enumerate() function was added when adding 52xx
support to arch/powerpc, but it must not be called for arch/ppc.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-09 17:03:02 +11:00
David S. Miller
e3a411a3df [SPARC64]: Fix of_iounmap() region release.
We need to pass in the resource otherwise we cannot
release the region properly.  We must know whether it is
an I/O or MEM resource.

Spotted by Eric Brower.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-31 14:06:05 -08:00
Peter Korsgaard
e21654a756 [PATCH] serial/uartlite: Only enable port if request_port succeeded
The uartlite driver used to always enable the port even if request_port
failed causing havoc. This patch fixes it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 09:58:48 -08:00
Russell King
1fb8cacc19 [PATCH] Add support for Korenix 16C950-based PCI cards
This adds initial support to 8250-pci for the Korenix Jetcard PCI serial
cards.  The JC12xx cards are standard RS232-based serial cards utilising
the Oxford 16C950 device.

The JC14xx are RS422/RS485-based cards, but in order for these to be
supported natively, we will need additional tweaks to the 8250 layers so
we can specify some values for the 950's registers.  Hence, these two
entries are commented out.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:18:11 -08:00
Linus Torvalds
775ba7ad49 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Fix inotify maintainers entry
  Fix typo in new debug options.
  Jon needs a new shift key.
  fs: Convert kmalloc() + memset() to kzalloc() in fs/.
  configfs.h: Remove dead macro definitions.
  kconfig: Standardize "depends" -> "depends on" in Kconfig files
  e100: replace kmalloc with kcalloc
  um: replace kmalloc+memset with kzalloc
  fix typo in net/ipv4/ip_fragment.c
  include/linux/compiler.h: reject gcc 3 < gcc 3.2
  Kconfig: fix spelling error in config KALLSYMS help text
  Remove duplicate "have to" in comment
  Fix small typo in drivers/serial/icom.c
  Use consistent casing in help message
  EXT{2,3,4}_FS: remove outdated part of the help text
2006-12-12 18:51:51 -08:00
Robert P. J. Day
bef1f40261 kconfig: Standardize "depends" -> "depends on" in Kconfig files
Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 20:04:19 +01:00
Thomas Hisch
87c18aa951 Fix small typo in drivers/serial/icom.c
Signed-off-by: Thomas Hisch <t.hisch@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 19:20:35 +01:00
Paul Mundt
41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Paul Mundt
313887507f serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Don Mullis
bf4735a46a [PATCH] Kconfig refactoring for better menu nesting
Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.

Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.

Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:39 -08:00
Alan Cox
606d099cdd [PATCH] tty: switch to ktermios
This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:57 -08:00
Ryan Bradetich
514fb84e1c [PARISC] [MUX] Get the hversion directly from the parisc_device
Willy pointed out the hversion is already stored
in the parisc_device, so I do not need to extract
this information directly from the IODC data.
Also by using the information in the parisc_device
I can avoid re-reading the IODC data for the Muxes
with specifed port counts.

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:31 -05:00
Ryan Bradetich
6142544584 [PARISC] [MUX] Correctly report the number of available ports
This patch adds a new function to return the actual number
of ports available.  Some of the built-in Muxes return the
number of supported ports, but not all of these port are
available for use.

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:29 -05:00
Ryan Bradetich
752b940359 [PARISC] [MUX] Detect multiple cards in the correct order
This patch follows the example of the 8250_gsc
driver by probing for specific built-in Mux
cards first.  This allows the system to preserve
the correct detection order with multiple Mux
cards.

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:26 -05:00
Ryan Bradetich
c380f05726 [PARISC] [MUX] Make the Serial Mux driver work as module
The following updates are based off a patch from willy:
  * Removal of the mux_card list.
  * Add the mux_remove function.

Other updates:
  * Re-organize the driver structure a bit to make the
    mux_init and mux_exit functions more symmetrical.
  * Added the del_timer.
  * Unregistered the console.

At this point I can insmod, rmmod, and re-insmod the
mux without any failures.

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:21 -05:00
Ryan Bradetich
9c6416ce6a [PARISC] [MUX] Claim resources for the Mux driver
This patch claims the iomem resources
for the Mux driver.

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:14 -05:00
Ryan Bradetich
3de7b6482b [PARISC] [MUX] Mux driver updates
This patch changes the Mux console to
use the Mux hardware instead of the PDC
Software console.

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:08 -05:00
Ryan Bradetich
4bd5d82779 [PARISC] [MUX] Mux driver bug fix
This patch addresses the problems identified by Russell King in the
following email:

http://lists.parisc-linux.org/pipermail/parisc-linux/2005-December/027912.html

Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08 00:34:05 -05:00
Linus Torvalds
ea14fad0d4 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits)
  [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked
  [ARM] 4001/1: S3C24XX: shorten reboot time
  [ARM] 3983/2: remove unused argument to __bug()
  [ARM] 4000/1: Osiris: add third serial port in
  [ARM] 3999/1: RX3715: suspend to RAM support
  [ARM] 3998/1: VR1000: LED platform devices
  [ARM] 3995/1: iop13xx: add iop13xx support
  [ARM] 3968/1: iop13xx: add iop13xx_defconfig
  [ARM] Update mach-types
  [ARM] Allow gcc to optimise arm_add_memory a little more
  [ARM] 3991/1: i.MX/MX1 high resolution time source
  [ARM] 3990/1: i.MX/MX1 more precise PLL decode
  [ARM] 3986/1: H1940: suspend to RAM support
  [ARM] 3985/1: ixp4xx clocksource cleanup
  [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2)
  [ARM] 3994/1: ixp23xx: fix handling of pci master aborts
  [ARM] 3981/1: sched_clock for PXA2xx
  [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit
  [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period
  [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter
  ...
2006-12-07 15:40:39 -08:00
Lennert Buytenhek
a4ed06ad83 [PATCH] amba-pl010: clear error flags on rx error
The pl010 primecell documentation specifies that an error indicated via RSR
should be cleared by a write to ECR.  We didn't do this, which was causing
errors to be re-reported on every call to pl010_rx_chars().

Doing a write to ECR once we detect an error appears to prevent the ep93xx
console UART driver from going into a mode where it reports "ttyAM0: X
input overrun(s)" every couple of keystrokes.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:44 -08:00
Mike Galbraith
f29219f17a [PATCH] make 8250_pnp serial driver work after suspend to ram
Add suspend/resume methods to drivers/serial/8250_pnp.c.  Tested on a
P4/HT 16550A box, ttyS0 login survives across suspend to ram.

[akpm@osdl.org: cleanups]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:43 -08:00
Maciej W. Rozycki
9399575dd3 [PATCH] dz: Fixes to make it work
This a set of fixes mostly to make the driver actually work:

1. Actually select the line for setting parameters and receiver
   disable/enable.
2. Select the line for receive and transmit interrupt handling correctly.
3. Report the transmitter empty state correctly.
4. Set the I/O type of ports correctly.
5. Perform polled transmission correctly.
6. Don't fix the console line at ttyS3.
7. Magic SysRq support.
8. Various small bits here and there.

Tested with a DECstation 2100 (thanks Flo for making this possible).

[akpm@osdl.org: fix typo]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:41 -08:00
Ralf Baechle
d3fa72e455 [PATCH] Pass struct dev pointer to dma_cache_sync()
Pass struct dev pointer to dma_cache_sync()

dma_cache_sync() is ill-designed in that it does not have a struct device
pointer argument which makes proper support for systems that consist of a
mix of coherent and non-coherent DMA devices hard.  Change dma_cache_sync
to take a struct device pointer as first argument and fix all its callers
to pass it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:41 -08:00
Paul B Schroeder
e0980dafa3 [PATCH] Exar quad port serial
This is on our "Envoy" boxes which we have, according to the documentation, an
"Exar ST16C554/554D Quad UART with 16-byte Fifo's".  The box also has two
other "on-board" serial ports and a modem chip.

The two on-board serial UARTs were being detected along with the first two
Exar UARTs.  The last two Exar UARTs were not showing up and neither was the
modem.

This patch was the only way I could the kernel to see beyond the standard four
serial ports and get all four of the Exar UARTs to show up.

[akpm@osdl.org: build fix]
Signed-off-by:  Paul B Schroeder <pschroeder@uplogix.com>
Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:35 -08:00
Peter Korsgaard
238b8721a5 [PATCH] serial uartlite driver
Add a driver for the Xilinx uartlite serial controller used in boards with
the PPC405 core in the Xilinx V2P/V4 fpgas.

The hardware is very simple (baudrate/start/stopbits fixed and no break
support).  See the datasheet for details:

	http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf

See http://thread.gmane.org/gmane.linux.serial/1237/ for the email thread.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:30 -08:00
Linus Torvalds
dd6a7c19e4 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (43 commits)
  sh: sh775x/titan fixes for irq header changes.
  sh: update r7780rp defconfig.
  sh: compile fixes for header cleanup.
  sh: Fixup pte_mkhuge() build failure.
  sh: set KBUILD_IMAGE to something sensible.
  sh: show held locks in stack trace with lockdep.
  sh: platform_pata support for R7780RP
  sh: stacktrace/lockdep/irqflags tracing support.
  sh: Fixup movli.l/movco.l atomic ops for gcc4.
  sh: dyntick infrastructure.
  sh: Clock framework tidying.
  sh: Turn off IRQs around get_timer_offset() calls.
  sh: Get the PGD right in oops case with 64-bit PTEs.
  sh: Fix store queue bitmap end.
  sh: More flexible + SH7780 earlyprintk SCIF support.
  sh: Fixup various PAGE_SIZE == 4096 assumptions.
  sh: Fixup 4K irq stacks.
  sh: dma-api channel capability extensions.
  sh: Drop name overload in dma-sh.
  sh: Make dma-isa depend on ISA_DMA_API.
  ...
2006-12-06 08:10:55 -08:00
Greg Ungerer
a8b8d57c25 [PATCH] m68knommu: ColdFire serial driver fixes
Some updates for the old ColdFire serial driver:

 . support 3 and 4 UARTs on some ColdFire parts that have them
 . enable multifunction pins to serial for 527x CPU's
 . support the 5272 UART's fractional baud rate divisor
 . switch driver name to "mcfserial"

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 07:41:26 -08:00
Paul Mundt
1d118562c2 sh: Clock framework tidying.
This syncs up the SH clock framework with the linux/clk.h API,
for which there were only some minor changes required, namely
the clk_get() dev_id and subsequent callsites.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt
6fc21b82ef sh: More flexible + SH7780 earlyprintk SCIF support.
This makes the early printk support somewhat more flexible,
moving the port definition to a config option, and making the
port initialization configurable for sh-ipl+g users.

At the same time, this allows us to trivially wire up the
SH7780 SCIF0, so that's thrown in too more or less for free.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Yoshinori Sato
9d4436a6fb sh: Add support for SH7206 and SH7619 CPU subtypes.
This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Linus Torvalds
bf83c2a315 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  [PATCH] pcmcia: at91_cf update
  [PATCH] pcmcia: fix m32r_cfc.c compilation
  [PATCH] pcmcia: ds.c debug enhancements
  [PATCH] pcmcia: at91_cf update
  [PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation
  [PATCH] pcmcia: remove prod_id indirection
  [PATCH] pcmcia: remove manf_id and card_id indirection
  [PATCH] pcmcia: IDs for Elan serial PCMCIA devcies
  [PATCH] pcmcia: allow for four multifunction subdevices
  [PATCH] pcmcia: handle __copy_from_user() return value in ioctl
  [PATCH] pcmcia: multifunction card handling fixes
  [PATCH] pcmcia: allow shared IRQs on pd6729 sockets
  [PATCH] pcmcia: start over after CIS override
  [PATCH] cm4000_cs: fix return value check
  [PATCH] pcmcia: yet another IDE ID
  [PATCH] pcmcia: Add an id to ide-cs.c
2006-12-05 15:52:06 -08:00
Dominik Brodowski
af2b3b503a [PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost
all PCMICA driver right at the beginning, using the same calls but slightly
different implementations. Unfiy this in the PCMCIA core.

Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused
label") from and Signed-off-by Adrian Bunk <bunk@stusta.de>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04 20:12:02 -05:00
Dominik Brodowski
efd50585e2 [PATCH] pcmcia: remove manf_id and card_id indirection
As we read out the manufactor and card_id from the PCMCIA device in the
PCMCIA core, and device drivers can access those reliably in struct
pcmcia_device's fields manf_id and card_id, remove additional (and partly
broken) manf_id and card_id detection logic from PCMCIA device drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04 20:09:20 -05:00
Tony Olech
44e5e33e99 [PATCH] pcmcia: IDs for Elan serial PCMCIA devcies
Add IDs for Elan serial PCMCIA devices. In addition, move the
pdaudio_cf driver from matching based on manf_id and card_id to
the more specific prod_id1 and prod_id2 to avoid false
positives.

Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04 20:09:19 -05:00
Grant Likely
b9272dfdfe [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver
Needed to support mpc52xx boards in arch/powerpc.  This patch
retains the platform_bus support when compiling for arch/ppc,
but uses the of_platform bindings for arch/powerpc.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 09:53:07 +11:00
Grant Likely
9b9129e739 [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver
Single typo fix and whitespace changes.  In preparation for heavy
changes to this driver when support for arch/powerpc is added.
Since the driver will be changing significantly anyway, then may
as well take the opportunity to clean it up first.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 09:53:07 +11:00
Andrew Victor
d707572695 [ARM] 3975/1: AT91: Comments in atmel_serial.h
Updated some of the comments in the atmel_serial.h header detailing
which bits are only available on the AT91RM9200 or the AT91SAM9xx
processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-04 14:37:39 +00:00
Andrew Victor
c2f5ccfbd5 [ARM] 3973/1: AT91: Serial driver compile fix
1. The CPU identification has moved from <system.h> to <cpu.h>.

2. AT91RM9200_BASE_US0 is only defined if we are compiling in support
for the AT91RM9200.  Therefore we need to replace the CONFIG_ARM ifdef
with CONFIG_ARCH_AT91RM9200

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-04 14:37:36 +00:00
Kalle Pokki
533462df56 [POWERPC] CPM_UART: Fix inconsistency of function definition
The below hunk was missed from the recent patch, and now, there are somewhat
inconsistent definitions:

in cpm_uart.h:
int __init cpm_uart_init_portdesc(void);

in cpm_uart_cpm1.c:
int __init cpm_uart_init_portdesc(void)
{
}

in cpm_uart_cpm2.c:
int cpm_uart_init_portdesc(void)
{
}

Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi>
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:25 +11:00
Andrew Victor
55d8baee4a [ARM] 3954/1: AT91: Update drivers for new headers
This patch updates the drivers (and other files) which include the
hardware headers.  This fixes the breakage introduced in patches 3950/1
and 3951/1 (those patches were getting big).

The AVR32 architecture uses the same serial driver and had its own copy
of at91rm9200_pdc.h.  Renamed it to at91_pdc.h

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 22:51:40 +00:00
Andrew Victor
79da7a610a [ARM] 3947/1: AT91: cpu_is_XXX macro's
This patch replaces the arch_identify() in system.h with a set of
cpu_is_XXX() macro's.  This allows for compile-time checking of the
target AT91 processor.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 22:51:36 +00:00
Kalle Pokki
0091cf5a6a [POWERPC] CPM_UART: Fix non-console initialisation
The cpm_uart driver is initialised incorrectly, if there is a frame buffer
console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to
call cpm_uart_init_portdesc() and set_lineif() in this case.

Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi>
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-10 21:35:36 +11:00
Kalle Pokki
599540a855 [POWERPC] CPM_UART: Fix non-console transmit
The SMC and SCC hardware transmitter is enabled at the wrong
place. Simply writing twice to the non-console port, like

$ echo asdf > /dev/ttyCPM1
$ echo asdf > /dev/ttyCPM1

puts the shell into endless uninterruptible sleep, since the
transmitter is stopped after the first write, and is not enabled
before the shutdown function of the second write. Thus the transmit
buffers are never emptied.

Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi>
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-10 21:26:40 +11:00
Andrew Morton
a5a89bae04 [PATCH] ioc4_serial: irq flags fix
Use the correct type for the CPU flags.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-30 12:08:40 -08:00
Randy Dunlap
74e8b51d25 [PATCH] Kconfig serial typos
Fix typo (repeated) in serial Kconfig.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:36 -07:00
Brent Casavant
59f148005c [PATCH] ioc4: Enable build on non-SN2
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future.  As such it is now a
misnomer for the IOC4 base device driver to live under drivers/sn, and
would complicate builds for non-SN2.

This patch moves the IOC4 base driver code from drivers/sn to drivers/misc,
and updates the associated Makefiles and Kconfig files to allow building on
non-SN2 configs.  Due to the resulting change in link order, it is now
necessary to use late_initcall() for IOC4 subdriver initialization.

[akpm@osdl.org: __udivdi3 fix]
[akpm@osdl.org: fix default in Kconfig]
Acked-by: Pat Gefre <pfg@sgi.com>
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 08:18:42 -07:00
Linus Torvalds
9eb2007488 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: SH-4A UBC support
  sh: interrupt exception handling rework
  sh: Default enable R7780RP IRQs.
  sh: Zero-out coherent buffer in consistent_alloc().
  sh: Convert IPR-IRQ to IRQ chip.
  sh: Convert INTC2 IRQ handler to irq_chip.
  sh: Fix pr_debug statements for sh4
  sh: Convert r7780rp IRQ handler to IRQ chip.
  sh: Updates for IRQ handler changes.
  sh: Kill off timer_ops get_frequency().
  sh: First step at generic timeofday support.
2006-10-12 08:33:23 -07:00
Martin Habets
eba8cefc78 [SPARC32]: Fix sparc32 modpost warnings with sunzilog
Fix this 2.6.19-rc1 build warnings from modpost:

WARNING: vmlinux - Section mismatch: reference to .init.text:sunzilog_console_setup from .data between 'sunzilog_console' (at offset 0x8394) and 'devices_subsys'

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11 23:56:53 -07:00
Al Viro
48343273e8 [PATCH] __iomem annotations in sunzilog
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-10 15:37:20 -07:00
Linus Torvalds
5a43c09d1b Merge branch 'irqclean-submit1' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
* 'irqclean-submit1' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  drivers/isdn/act2000: kill irq2card_map
  drivers/net/eepro: kill dead code
  Various drivers' irq handlers: kill dead code, needless casts
  drivers/net: eliminate irq handler impossible checks, needless casts
  arch/i386/kernel/time: don't shadow 'irq' function arg
2006-10-09 14:21:45 -07:00
Al Viro
9c8e7f5cc9 [PATCH] m32r pt_regs fixes
... and now with irq_regs.h not forgotten...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-07 10:51:15 -07:00
Matthew Wilcox
be577a5220 Build fixes for struct pt_regs removal
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-06 20:47:23 -06:00
Jeff Garzik
5d347c8aba Merge branch 'submit1' of viper:/spare/repo/irq-remove-2.6 into irqcleanups 2006-10-06 15:27:31 -04:00
Jeff Garzik
c7bec5aba5 Various drivers' irq handlers: kill dead code, needless casts
- Eliminate casts to/from void*

- Eliminate checks for conditions that never occur.  These typically
  fall into two classes:

	1) Checking for 'dev_id == NULL', then it is never called with
	NULL as an argument.

	2) Checking for invalid irq number, when the only caller (the
	system) guarantees the irq handler is called with the proper
	'irq' number argument.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-06 15:00:58 -04:00
Tony Luck
8c1addbc75 [IA64] Fix breakage from irq change
A few missed spots in ia64-land from this gigantic commit:

7d12e780e0

Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-10-06 10:09:41 -07:00
Paul Mundt
35f3c5185b sh: Updates for IRQ handler changes.
Trivial fixes for build breakage introduced by IRQ handler changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:31:16 +09:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Haavard Skinnemoen
4d5e392c33 [PATCH] atmel_serial: Fix roundoff error in atmel_console_get_options
The atmel_console_get_options() function initializes the baud,
parity and bits settings from the actual hardware setup, in
case it has been initialized by a e.g. boot loader.

The baud rate, however, is not necessarily exactly equal to one of
the standard baud rates (115200, etc.) This means that the baud rate
calculated by this function may be slightly higher or slightly lower
than one of the standard baud rates.

If the baud rate is slightly lower than the target, this causes
problems when uart_set_option() tries to match the detected baud rate
against the standard baud rate, as it will always select a baud rate
that is lower or equal to the target rate. For example if the
detected baud rate is slightly lower than 115200, usart_set_options()
will select 57600.

This patch fixes the problem by subtracting 1 from the value in BRGR
when calculating the baud rate. The detected baud rate will thus
always be higher than the nearest standard baud rate, and
uart_set_options() will end up doing the right thing.

Tested on ATSTK1000 and AT91RM9200-EK boards. Both are broken without
this patch.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:06 -07:00
Haavard Skinnemoen
acca9b83ac [PATCH] atmel_serial: Support AVR32
Make CONFIG_SERIAL_ATMEL selectable on AVR32 and #ifdef out some ARM-
specific code in the driver.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:06 -07:00
Haavard Skinnemoen
75d3521377 [PATCH] atmel_serial: Pass fixed register mappings through platform_data
In order to initialize the serial console early, the atmel_serial
driver had to do a hack where it compared the physical address of the
port with an address known to be permanently mapped, and used it as a
virtual address. This got around the limitation that ioremap() isn't
always available when the console is being initalized.

This patch removes that hack and replaces it with a new "regs" field
in struct atmel_uart_data that the board-specific code can initialize
to a fixed virtual mapping for platform devices where this is possible.
It also initializes the DBGU's regs field with the address the driver
used to check against.

On AVR32, the "regs" field is initialized from the physical base
address when this it can be accessed through a permanently 1:1 mapped
segment, i.e. the P4 segment.

If regs is NULL, the console initialization is delayed until the "real"
driver is up and running and ioremap() can be used.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
71f2e2b878 [PATCH] atmel_serial: Rename at91_register_uart_fns
Rename at91_register_uart_fns and associated structs and variables
to make it consistent with the atmel_ prefix used by the rest of
the driver.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
9ab4f88b7f [PATCH] serial: Rename PORT_AT91 -> PORT_ATMEL
The at91_serial driver can be used with both AT32 and AT91 devices
from Atmel and has therefore been renamed atmel_serial. The only
thing left is to rename PORT_AT91 PORT_ATMEL.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
7192f92c79 [PATCH] at91_serial -> atmel_serial: Internal names
Prefix all internal functions and variables with atmel_ instead of
at91_.

The at91_register_uart_fns() stuff is left as is since I can't find
any actual users of it.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
73e2798b0f [PATCH] at91_serial -> atmel_serial: Public definitions
Rename the following public definitions:
  * AT91_NR_UART -> ATMEL_MAX_UART
  * struct at91_uart_data -> struct atmel_uart_data
  * at91_default_console_device -> atmel_default_console_device

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
1e8ea80219 [PATCH] at91_serial -> atmel_serial: Platform device name
Rename the "at91_usart" platform driver "atmel_usart" and update
platform devices accordingly.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
749c4e6033 [PATCH] at91_serial -> atmel_serial: Kconfig symbols
Rename the following Kconfig symbols:
  * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL
  * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE
  * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
b6156b4e2e [PATCH] at91_serial -> atmel_serial: at91_serial.c
Rename at91_serial.c atmel_serial.c

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen
5b34821a60 [PATCH] at91_serial -> atmel_serial: at91rm9200_usart.h
Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename
it atmel_usart.h. Also delete AVR32's version of this file.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Linus Torvalds
fefd26b3b8 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/configh
* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh:
  Remove all inclusions of <linux/config.h>

Manually resolved trivial path conflicts due to removed files in
the sound/oss/ subdirectory.
2006-10-04 09:59:57 -07:00
Matthew Wilcox
136ce40e9f [PARISC] Clean up asm-parisc/serial.h
Russell King pointed out that asm/serial.h is anachronistic and we were
misusing BASE_BAUD.  So fix BASE_BAUD for PCI 16550 UARTs, move LASI_BASE_BAUD
into 8250_gsc, and fix the obsolete comment about reserving serial port slots.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:47:03 -06:00
Carlos O'Donell
e45da35e18 [PARISC] Document that D-class can also use serial_mux
Signed-off-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:46:11 -06:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Matt LaPlante
095096038d Fix several typos in drivers/
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:31:37 +02:00
Linus Torvalds
6f3a28f7d1 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits)
  [SERIAL] add PNP IDs for FPI based touchscreens
  [SERIAL] Magic SysRq SAK does nothing on serial consoles
  [SERIAL] tickle NMI watchdog on serial output.
  [SERIAL] Fix oops when removing suspended serial port
  [SERIAL] Fix resume handling bug
  [SERIAL] Remove wrong asm/serial.h inclusions
  [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c
  [SERIAL] OMAP1510 serial fix for 115200 baud
  [SERIAL] returning proper error from serial core driver
  [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port
  [SERIAL] suspend/resume handlers don't have level arg anymore
  [SERIAL] 8250 resourse management fixes
  [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card
  [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk
  [SERIAL] serial_cs: add configuration quirk
  [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk
  [SERIAL] serial_cs: convert IBM post-init handling to a quirk
  [SERIAL] serial_cs: allow wildcarded quirks
  [SERIAL] serial_cs: convert multi-port table to quirk table
  [SERIAL] serial_cs: Use clean up multiport card detection
  ...
2006-10-03 09:13:29 -07:00
Linus Torvalds
ccaa36f735 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits)
  [POWERPC] Fix rheap alignment problem
  [POWERPC] Use check_legacy_ioport() for ISAPnP
  [POWERPC] Avoid NULL pointer in gpio1_interrupt
  [POWERPC] Enable generic rtc hook for the MPC8349 mITX
  [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class
  [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
  [POWERPC] fix spin lock nesting in hvc_iseries
  [POWERPC] EEH failure to mark pci slot as frozen.
  [POWERPC] update powerpc defconfig files after libata kconfig breakage
  [POWERPC] enable sysrq in pmac32_defconfig
  [POWERPC] UPIO_TSI cleanup
  [POWERPC] rewrite mkprep and mkbugboot in sane C
  [POWERPC] maple/pci iomem annotations
  [POWERPC] powerpc oprofile __user annotations
  [POWERPC] cell spufs iomem annotations
  [POWERPC] NULL noise removal: spufs
  [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c
  [POWERPC] update mpc8349_itx_defconfig and remove some debug settings
  [POWERPC] Always call cede in pseries dedicated idle loop
  [POWERPC] Fix loop logic in irq_alloc_virt()
  ...
2006-10-03 08:52:26 -07:00
Jeff Dike
b68e31d0eb [PATCH] const struct tty_operations
As part of an SMP cleanliness pass over UML, I consted a bunch of
structures in order to not have to document their locking.  One of these
structures was a struct tty_operations.  In order to const it in UML
without introducing compiler complaints, the declaration of
tty_set_operations needs to be changed, and then all of its callers need to
be fixed.

This patch declares all struct tty_operations in the tree as const.  In all
cases, they are static and used only as input to tty_set_operations.  As an
extra check, I ran an i386 allyesconfig build which produced no extra
warnings.

53 drivers are affected.  I checked the history of a bunch of them, and in
most cases, there have been only a handful of maintenance changes in the
last six months.  serial_core.c was the busiest one that I looked at.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:14 -07:00
Matthew Garrett
75fde2eddc [SERIAL] add PNP IDs for FPI based touchscreens
The Compaq TC1000 and Fujitsu Stylistic range of tablet machines use
touchscreens from FPI. These are implemented as serial interfaces,
generally exposed in the ACPIPNP information on the system. This patch
adds them to the 8250_pnp driver tables, avoiding the need to mess
around with setserial to set them up.

I haven't been able to confirm what FUJ02B5, FUJ02BA and FUJ02BB are.
FUJ02B1 refers to the controller for the system hotkeys. FUJ02BC appears
to be the last in the range - after this, they moved to Wacom-based
systems.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 21:27:15 +01:00
Dave Jones
e480af09c4 [SERIAL] tickle NMI watchdog on serial output.
Serial is _slow_ sometimes. So slow, that the NMI watchdog kicks in.

NMI Watchdog detected LOCKUP on CPU2CPU 2
Modules linked in: loop usb_storage md5 ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core rfcomm l2cap bluetooth sunrpc pcdPid: 3138, comm: gpm Not tainted 2.6.11-1.1290_FC4smp
RIP: 0010:[<ffffffff80273b8a>] <ffffffff80273b8a>{serial_in+106}
RSP: 0018:ffff81003afc3d50  EFLAGS: 00000002
RAX: 0000000000000020 RBX: 0000000000000020 RCX: 0000000000000000
RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff804dcd60
RBP: 00000000000024fc R08: 000000000000000a R09: 0000000000000033
R10: ffff81001beb7c20 R11: 0000000000000020 R12: ffffffff804dcd60
R13: ffffffff804ade76 R14: 000000000000002b R15: 000000000000002c
FS:  00002aaaaaac4920(0000) GS:ffffffff804fca00(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002aaaaabcb000 CR3: 000000003c0d0000 CR4: 00000000000006e0
Process gpm (pid: 3138, threadinfo ffff81003afc2000, task ffff81003eb63780)
Stack: ffffffff80275f2e 0000000000000000 ffffffff80448380 0000000000007d6b
       000000000000002c fffffffffffffbbf 0000000000000292 0000000000008000
       ffffffff80138e8c 0000000000007d97
Call Trace:<ffffffff80275f2e>{serial8250_console_write+270} <ffffffff80138e8c>{__call_console_drivers+76}
       <ffffffff8013914b>{release_console_sem+315} <ffffffff80260325>{con_open+149}
       <ffffffff80254e99>{tty_open+537} <ffffffff80192713>{chrdev_open+387}
       <ffffffff80188824>{dentry_open+260} <ffffffff80188994>{filp_open+68}
       <ffffffff80187b73>{get_unused_fd+227} <ffffffff80188a6c>{sys_open+76}
       <ffffffff8010ebc6>{tracesys+209}

Code: 0f b6 c0 c3 66 90 41 57 49 89 f7 41 56 41 be 00 01 00 00 41
console shuts up ...

I initially did the patch below a year ago for the Fedora kernel, and have
been keeping it up to date since.  I recently got the same thing happening
on a vanilla kernel, so figured it was time to repost this.

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 20:03:19 +01:00
Russell King
a6b93a9085 [SERIAL] Fix oops when removing suspended serial port
A serial card might have been removed when the system is resumed.
This results in a suspended port being shut down, which results in
the ports shutdown method being called twice in a row.  This causes
BUGs.  Avoid this by tracking the suspended state separately from
the initialised state.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:17:40 +01:00
Russell King
fe59d5372a [SERIAL] Fix resume handling bug
Unfortunately, pcmcia_dev_present() returns false when a device is
suspended, so checking this on resume does not work too well.  Omit
this test.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:14:07 +01:00
Alexey Dobriyan
1d5e799663 [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c
Remove some code which is unneeded if CONFIG_PM=n.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:07:08 +01:00
Jonathan McDowell
255341c6fd [SERIAL] OMAP1510 serial fix for 115200 baud
The patch below is necessary for 115200 baud on an OMAP1510 internal UART.
It's been in the linux-omap tree for some time and with it applied to a
vanilla Linus git tree the serial console on the Amstrad Delta (which is
OMAP1510 based and whose initial bootloader runs at 115200) works fine (it
doesn't without it).

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:07:06 +01:00
Ram Gupta
80e3c2b659 [SERIAL] returning proper error from serial core driver
Fix the issue of returning 0 even in case of error from uart_set_info
function.  Now it returns the error EBUSY when it can not set new port.

Signed-off-by: Ram Gupta <r.gupta@astronautics.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:07:00 +01:00
Sergei Shtylyov
6c6a2334a1 [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port
/proc/tty/driver/serial incorrectly claims that UARTs having iotype of
UPIO_MEM32, UPIO_AU, or UPIO_TSI are I/O mapped.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:57 +01:00
Sergei Shtylyov
a4b775735c [SERIAL] suspend/resume handlers don't have level arg anymore
8250.c and serial_txx9.c port suspend/resume handler still have this obsolete
argument documented...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:54 +01:00
Sergei Shtylyov
0b30d668a2 [SERIAL] 8250 resourse management fixes
I think register ranges obviously need to be claimed/released for all UARTs
including those with UPIO_MEM32 and UPIO_TSI iotype.

Also, serial8250_request_rsa_resources() returns false positives with
UPIO_MEM32, UPIO_AU, and UPIO_TSI iotype -- I don't think this makes any sense.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:49 +01:00
Russell King
f3d106881b [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card
Mauro Ziliani reports that this card has a higher clock rate.
Rather than tweak the 8250 driver to handle this, add a quirk to
pass the correct clock rate to the driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:45 +01:00
Russell King
20f130495c [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk
According to the existing code, Nokia only make single-port cards,
but are detected as multi-port cards.  Handle this in roughly the
same way via the config quirk - forcing it to be a real single port
card (info->multi=0) changes the way we allocate the IO memory,
which might stop the card working.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:41 +01:00
Russell King
efd92dfaad [SERIAL] serial_cs: add configuration quirk
Add a quirk primerily to handle tweaks to the link->conf structure,
eg as required for Socket cards.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:37 +01:00
Russell King
7ef057fa70 [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk
Move the Oxford Semi OX950 / Possio GCC wakeup handling to a quirk
wakeup handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:34 +01:00
Russell King
eee3a883ce [SERIAL] serial_cs: convert IBM post-init handling to a quirk
Move IBM quirk handling into its own quirk entry.  Note that doing
quirk handling after we've registered the ports is racy, but since
I don't know if moving this will have an undesired effect, it's
probably better to leave where it is.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:30 +01:00
Russell King
a8244b564c [SERIAL] serial_cs: allow wildcarded quirks
Some quirks we will introduce next apply to (eg) all cards of one
manufacturer.  Therefore, we need a way to list these in the quirk
table - use ~0 - this is not a possible device ID value.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:27 +01:00
Russell King
1fbbac4bcb [SERIAL] serial_cs: convert multi-port table to quirk table
- rename multi_id table to serial_quirk / quirks[]
- use named initialisers
- store a pointer to the quirk table in the serial_info structure
  so we can use the quirk table entry later.
- apply multi-port quirk after the multi-port guessing code,
  but only if it's != -1.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:23 +01:00
Russell King
43549ad7a7 [SERIAL] serial_cs: Use clean up multiport card detection
- Use ARRAY_SIZE() instead of home grown based version.
- use parse->manfid.card rather than le16_to_cpu(buf[1]) -
  manfid.card is already converted to this format.
- use info->prodid in subsequent tests rather than
  parse->manfid.card.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:20 +01:00
Russell King
de6cc84f72 [SERIAL] Remove m32r_sio dependency on asm/serial.h
m32r_sio re-uses a custom defined BASE_BAUD from asm/serial.h,
and replaces SERIAL_PORT_DFNS with its own driver private copy.
Since asm/serial.h is supposed to define 8250-based ports using
these symbols, this isn't a sane idea.

Hence, eliminate asm/serial.h from m32r_sio.c.

Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:06:03 +01:00
Amol Lad
65da4d81f4 [PATCH] ioremap balanced with iounmap for drivers/serial/sunsu.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David S. Miller <davem@sunset.davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
af907dc8cd [PATCH] ioremap balanced with iounmap for drivers/serial/mux.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
a141a04330 [PATCH] ioremap balanced with iounmap for drivers/serial/mpsc.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
be618f550c [PATCH] ioremap balanced with iounmap for drivers/serial/mpc52xx_uart.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
6257b3bdfd [PATCH] ioremap balanced with iounmap for drivers/serial/ip22zilog.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
f466413261 [PATCH] ioremap balanced with iounmap for drivers/serial/ioc4_serial.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Brent Casavant <bcasavan@sgi.com>
Cc: Pat Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
d9964d5c90 [PATCH] ioremap balanced with iounmap for drivers/serial/8250_gsc.c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
Amol Lad
f12ad7d59a [PATCH] ioremap balanced with iounmap for drivers/serial/8250_acorn,c
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:32 -07:00
David S. Miller
fbe96f92b3 [SERIAL] sunzilog: Mark sunzilog_init_hw as __devinit.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-29 16:12:43 -07:00
Peter Korsgaard
b22b4cdd53 [PATCH] fix serial/amba-pl011.c console Kconfig
Fix the Kconfig entry for console on AMBA PL011 to match the code.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:14 -07:00
Linus Torvalds
ebdea46fec Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits)
  [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
  [ARM] 3855/1: Add generic time support
  [ARM] 3873/1: S3C24XX: Add irq_chip names
  [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
  [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
  [ARM] nommu: confirms the CR_V bit in nommu mode
  [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
  [ARM] 3870/1: AT91: Start removing static memory mappings
  [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
  [ARM] 3868/1: AT91 hardware header update
  [ARM] 3867/1: AT91 GPIO update
  [ARM] 3866/1: AT91 clock update
  [ARM] 3865/1: AT91RM9200 header updates
  [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
  [ARM] kthread: switch arch/arm/kernel/apm.c
  [ARM] Off-by-one in arch/arm/common/icst*
  [ARM] 3864/1: Refactore sharpsl_pm
  [ARM] 3863/1: Add Locomo SPI Device
  [ARM] 3847/2:  Convert LOMOMO to use struct device for GPIOs
  [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h
  ...
2006-09-28 14:40:39 -07:00
Andrew Victor
72729910c3 [ARM] 3865/1: AT91RM9200 header updates
This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:52:05 +01:00
Paul Mackerras
4e6d816e51 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ 2006-09-28 07:18:28 +10:00
Paul Mundt
ecd9561687 serial: Add SERIAL_SH_SCI_NR_UARTS for sh-sci.
sh-sci needs to be able to define its number of ports to
support, we do this with a config option, like most other
ports do.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:32:30 +09:00
Paul Mundt
e108b2ca23 serial: Rework sh-sci for driver model.
sh-sci was turning in to an unmaintainable mess, especially with
regards to the port list. This cleans it up quite a bit, and
switches over to a platform device model where subtypes will
register their port list individually in their setup code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:32:13 +09:00