Commit Graph

75 Commits

Author SHA1 Message Date
Stephen Warren
e339364514 Kbuild: centralize MKIMAGE and cmd_uimage definitions
All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib
to avoid duplication.

All ARCHs have similar definitions of cmd_uimage. Place a sufficiently
parameterized version in Makefile.lib to avoid duplication.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Mike Frysinger <vapier@gentoo.org> [Blackfin]
Tested-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-03-26 15:49:20 +02:00
Simon Horman
e66ac3f26a sh: kexec: Add PHYSICAL_START
Add PHYSICAL_START kernel configuration parameter to set the address at
which the kernel should be loaded.

It has been observed on an sh7757lcr that simply modifying MEMORY_START
does not achieve this goal for 32bit sh. This is due to MEMORY_OFFSET in
arch/sh/kernel/vmlinux.lds.S bot being based on MEMORY_START on such
systems.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 15:03:43 +09:00
Paul Mundt
363e9f05cb sh: Remove compressed kernel libgcc dependency.
SH-2A is unable to combine the kernel and libgcc objects due to
fundamental disagreements over FDPIC settings. As the kernel already
contains all of the libgcc bits broken out, there's not much need to
bother with the linking anymore, as everything can already be derived
from the lib dir.

This simply plugs in the necessary bits to ensure that everything is
built uniformly, enabling us to wean the compressed build off of explicit
libgcc linking.

Reported-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-06 17:57:58 +09:00
Simon Horman
9d9659b6c0 mmc: Add MMC_PROGRESS_*
This is my second attempt to make this enum generally available.
The first attempt added MMCIF_PROGRESS_* to include/linux/mmc/sh_mmcif.h.
However this is not sufficiently generic as the enum will be
used by SDHI boot code.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-25 01:24:57 +09:00
Chris Smith
d4f7e51323 sh: Enable CONFIG_GCOV_PROFILE_ALL for sh
This patch enables gcov kernel profiling over the whole kernel for sh.
Profiling of specific files individually already worked. A handful of
files have to be explicitly excluded from the profiling to avoid
breaking things, notably pmb.c.

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15 16:47:17 +09:00
Paul Mundt
50cfa79dcb sh: support XZ-compressed kernel.
Follow the x86 change and wire up support for the XZ decompressor.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-14 15:52:54 +09:00
Simon Horman
54b384634f mmc, sh: Remove sh_mmcif_boot_slurp()
As the only caller of sh_mmcif_boot_do_read() is
sh_mmcif_boot_slurp() the configuration portion of
sh_mmcif_boot_slurp() can be merged into sh_mmcif_boot_do_read().

Once this is done sh_mmcif_boot_slurp() is only a call
to sh_mmcif_boot_do_read() with platform specific information -
the offset that images are stored on MMC. So make the
sh_mmcif_boot_do_read() call directly from platform code
and remove sh_mmcif_boot_slurp() altogether.

Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-08 16:24:28 +09:00
Simon Horman
9f843706bb mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h
Allow MMCIF_PROGRESS_* to be shared.

Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-08 16:24:21 +09:00
Magnus Damm
68a1aed703 sh: boot kernel with SR.BL set
Update the SH kernel to keep SR.BL set until the VBR
register has been initialized. Useful to allow boot
of the kernel even though exceptions are pending.

Without this patch there is a window of time when
exceptions such as NMI are enabled but no exception
handlers are installed.

This patch modifies both the zImage loader and the
actual kernel to boot with BL=1, but the zImage
loader is modfied in such a way that the init_sr
value is unchanged to not break the zImage loader
provided by kexec.

Tested on sh7724 Ecovec and on the SH4AL-DSP core
included in sh7372.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30 09:43:32 +09:00
Linus Torvalds
999fd1ab34 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: Make intc messages consistent via pr_fmt.
  sh: make sure static declaration on ms7724se
  sh: make sure static declaration on mach-migor
  sh: make sure static declaration on mach-ecovec24
  sh: make sure static declaration on mach-ap325rxa
  clocksource: sh_cmt: compute mult and shift before registration
  clocksource: sh_tmu: compute mult and shift before registration
  sh: PIO disabling for x3proto and urquell.
  sh: mach-sdk7786: conditionally disable PIO support.
  sh: support for platforms without PIO.
  usb: r8a66597-hcd pio to mmio accessor conversion.
  usb: gadget: r8a66597-udc pio to mmio accessor conversion.
  usb: gadget: m66592-udc pio to mmio accessor conversion.
  sh: add romImage MMCIF boot for sh7724 and Ecovec V2
  sh: add boot code to MMCIF driver header
  sh: prepare MMCIF driver header file
  sh: allow romImage data between head.S and the zero page
  sh: Add support MMCIF for ecovec
  sh: remove duplicated #include
  input: serio: disable i8042 for non-cayman sh platforms.
  ...
2010-06-04 15:42:09 -07:00
Linus Torvalds
1f73897861 Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...
2010-06-01 08:55:52 -07:00
Magnus Damm
4705b2e804 sh: add romImage MMCIF boot for sh7724 and Ecovec V2
This patch is V2 of the MMCIF romImage boot support
for sh7724 and the Ecovec board. With this patch
applied and CONFIG_ROMIMAGE_MMCIF selected the
romImage kernel image can be written to a MMC card
and booted directly by the sh7724 cpu.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-31 13:11:54 +09:00
Magnus Damm
b34bce4553 sh: allow romImage data between head.S and the zero page
Extend the romImage code to allow putting data between
the head.S file and the empty_zero_page. Needed in the
case of more advanced loader code in a separate C file.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-31 13:11:34 +09:00
Matt Fleming
9c3d936352 sh: Fix zImage load address when CONFIG_32BIT=y
We can't necessarily use the P1SEG region to access RAM when running in
32BIT mode, so use CONFIG_MEMORY_START as the base address.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-04-25 20:44:23 +01:00
Matt Fleming
b161313ae8 sh: Fix address to decompress at when CONFIG_32BIT=y
When running in 32BIT mode the P1SEG region doesn't necessarily provide
a window onto RAM (it depends how the bootloader setup the PMB). The
correct location to place the decompressed kernel is the physical
address of _text.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-04-25 20:44:23 +01:00
Denys Vlasenko
041d5f94c4 Rename .rodata.compressed to .rodata..compressed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-03-03 11:26:00 +01:00
Andrea Gelmini
55c1b0d27b arch/sh/boot/compressed/cache.c: Checkpatch cleanup
arch/sh/boot/compressed/cache.c:8: WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-01 11:57:31 +09:00
Paul Mundt
d01447b319 sh: Merge legacy and dynamic PMB modes.
This implements a bit of rework for the PMB code, which permits us to
kill off the legacy PMB mode completely. Rather than trusting the boot
loader to do the right thing, we do a quick verification of the PMB
contents to determine whether to have the kernel setup the initial
mappings or whether it needs to mangle them later on instead.

If we're booting from legacy mappings, the kernel will now take control
of them and make them match the kernel's initial mapping configuration.
This is accomplished by breaking the initialization phase out in to
multiple steps: synchronization, merging, and resizing. With the recent
rework, the synchronization code establishes page links for compound
mappings already, so we build on top of this for promoting mappings and
reclaiming unused slots.

At the same time, the changes introduced for the uncached helpers also
permit us to dynamically resize the uncached mapping without any
particular headaches. The smallest page size is more than sufficient for
mapping all of kernel text, and as we're careful not to jump to any far
off locations in the setup code the mapping can safely be resized
regardless of whether we are executing from it or not.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-18 18:13:51 +09:00
Nobuhiro Iwamatsu
319c2cc761 sh: Fix zImage boot using fixed PMB.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16 13:50:26 +09:00
Paul Mundt
abec86a802 sh: Kill off superfluous sh_bios references from compressed loader.
The VBR value needs to be initialized in order for any of the bios
trapping to work, and as we don't do that until slightly later in the
boot process, this has no real chance of working.

The only reason for using this in the past was due to the fact that early
serial initialization wasn't possible, but now that early sh-sci is
supported by everyone, there's no longer any reason to support the
sh_bios hacks in the first place. Given that, we just kill off the
references completely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-28 18:26:37 +09:00
Paul Mundt
a0ab36689a sh: fixed PMB mode refactoring.
This introduces some much overdue chainsawing of the fixed PMB support.
fixed PMB was introduced initially to work around the fact that dynamic
PMB mode was relatively broken, though they were never intended to
converge. The main areas where there are differences are whether the
system is booted in 29-bit mode or 32-bit mode, and whether legacy
mappings are to be preserved. Any system booting in true 32-bit mode will
not care about legacy mappings, so these are roughly decoupled.

Regardless of the entry point, PMB and 32BIT are directly related as far
as the kernel is concerned, so we also switch back to having one select
the other.

With legacy mappings iterated through and applied in the initialization
path it's now possible to finally merge the two implementations and
permit dynamic remapping overtop of remaining entries regardless of
whether boot mappings are crafted by hand or inherited from the boot
loader.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 18:31:48 +09:00
Paul Mundt
c7b16efb7d sh: Add support for LZO-compressed kernels.
Plugs in LZO along with the others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 13:29:19 +09:00
Magnus Damm
6a5a0b9139 sh: include empty zero page in romImage
This patch updates the romImage code to include the
empty_zero_page contents from vmlinux. Without this
patch the empty zero page is lef uninitialized.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04 16:26:20 +09:00
Paul Mundt
a384fe55c2 Merge branch 'sh/stable-updates' 2009-10-26 19:46:59 +09:00
Magnus Damm
9e24c7e2ac sh: add uImage.bin target
Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:46:25 +09:00
Matt Fleming
8bd642b17b sh: Obliterate the P1 area macros
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the
idea that all addresses in P1SEG are untranslated, so we can access an
address's physical page as an offset from P1SEG. This doesn't work for
CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used
for PMB mappings and so can be translated to any physical address.

Likewise, replace a P1SEGADDR() use with virt_to_phys().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:02 +09:00
Sam Ravnborg
caa27b66bd kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:18:14 +02:00
Stuart Menefy
fea966f756 sh: Remove implicit sign extension from assembler immediates
The SH instruction set has several instructions which accept an 8 bit
immediate operand. For logical instructions this operand is zero extended,
for arithmetic instructions the operand is sign extended. After adding an
option to the assembler to check this, it was found that several pieces
of assembly code were assuming this behaviour, and in one case
getting it wrong.

So this patch explicitly sign extends any immediate operands, which makes
it obvious what is happening, and fixes the one case which got it wrong.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:09:53 +09:00
Magnus Damm
2d2bcd319a sh: fix romImage mach dir usage
This patch moves all the romImage related header files into
the mach/ directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07 03:58:38 +09:00
Magnus Damm
3c928320b2 sh: romImage support V2
This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.

Board code should keep their setup code in the file
romimage.h located in their mach include directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-30 00:24:03 +09:00
Paul Mundt
fc6cca3917 Merge branches 'sh/compressors' and 'sh/stable-updates' 2009-07-21 17:37:18 +09:00
Paul Mundt
ef9b542fce sh: bzip2/lzma uImage support.
This builds on the bzip2/lzma zImage support change and wires it up for
uImages. Based on the blackfin implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-21 17:24:36 +09:00
Paul Mundt
3e28ad7b24 Merge branches 'sh/compressors' and 'sh/ftrace' 2009-07-12 11:45:25 -04:00
Paul Mundt
040f43e0bf sh64: Don't use PHYSADDR() for output_addr calculation.
Opencode the MEMORY_START offset directly, sh64 uses a slightly different
calculation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:36:25 -04:00
Paul Mundt
59f002964f sh: rename arch/sh/boot/compressed/misc_32.c -> misc.c
This is now used by both sh64 and regular sh, kill off the old sh64
version now too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:32:24 -04:00
Paul Mundt
b14c6d428a sh: Consolidate the sh64 changes in arch/sh/boot/compressed/misc_32.c
This makes some minor changes to misc_32.c so that it can be used by
sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:30:38 -04:00
Paul Mundt
07e88e1bfc sh: bzip2/lzma zImage support.
This plugs in bzip2 and lzma support for zImages.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:21:19 -04:00
Paul Mundt
df8ce2595f sh: Tidy up gzip-based zImage decompression.
This brings the zImage handling in to the current century, in preparation
for handling the other compression types.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-12 01:37:30 +09:00
Paul Mundt
473d1cf4ee sh: Decouple mcount from ftrace.
This adds a general CONFIG_MCOUNT in order to permit mcount generation
without ftrace support. This is primarily for allowing platforms to
enable aggressive stack overflow checking without having to enable ftrace
support. Based on the sparc64 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 19:56:58 +09:00
Paul Mundt
1eca133cc9 sh: Merge the split arch/sh/boot/compressed/ Makefiles.
This kills off the _64 variant and moves the _32 one over as the generic
one to use.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:58:21 +09:00
Paul Mundt
b208835624 sh: Provide a BITS definition, use it in the arch/sh/boot/ Makefiles.
This introduces a BITS export that can handily be picked up by Makefiles
for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in
preparation for unifying the Makefiles.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:55:45 +09:00
Paul Mundt
20b27fa337 sh: Fix up the sh64 zImage build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:36:22 +09:00
Paul Mundt
7b022d07a0 sh: Tidy up the ldscript output format specifier.
Tie this in to the Makefile directly, where we already know what we are
running on. This tidies up the linker script a bit, and is prep work for
unifying the arch/sh/boot/compressed linker scripts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:25:08 +09:00
Yoshihiro Shimoda
2f47f44790 sh: Support fixed 32-bit PMB mappings from bootloader.
This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.

P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 15:49:54 +09:00
Paul Mundt
694f94f263 sh: FTRACE renamed to FUNCTION_TRACER.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31 16:20:36 +09:00
Paul Mundt
9d2b1f81dd sh: ftrace support.
This adds support for ftrace to SH. This only includes CONFIG_FTRACE,
and does not handle dynamic ftrace presently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 16:43:45 +09:00
Paul Mundt
6907e6a601 sh: Add the rest of the boot targets to arch/sh/boot/.gitignore.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:05 +09:00
Chris Smith
664718a343 sh: Fix uImage load address in 32-bit mode.
Fix "make uImage" load and entry addresses in 32-bit mode.

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Paul Mundt
fa43972fab sh: fixup many sparse errors.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Paul Mundt
d27e0854d5 sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
If none is defined, provide a sane default, as we do for the other
options.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 09:15:01 +09:00