Commit Graph

14 Commits

Author SHA1 Message Date
Fred Isaman
f7e8917a67 pnfs: layout roc code
A layout can request return-on-close.  How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close.  In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:32 -05:00
Fred Isaman
43f1b3da8b pnfs: add CB_LAYOUTRECALL handling
This is the heart of the wave 2 submission.  Add the code to trigger
drain and forget of any afected layouts.  In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored.  This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:32 -05:00
Fred Isaman
cc6e5340b0 pnfs: change lo refcounting to atomic_t
This will be required to allow us to grab reference outside of i_lock.
While we are at it, make put_layout_hdr take the same argument as all the
related functions.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:32 -05:00
Fred Isaman
cf7d63f1f9 pnfs: serialize LAYOUTGET(openstateid)
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs
using the previous stateid are completed.  This requires choosing the
stateid to encode earlier, so we can abort if one is not available (we
want to use the open stateid, but a LAYOUTGET is already out using
it), and adding a count of the number of outstanding rpc calls using
layout state (which for now consist solely of LAYOUTGETs).

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:31 -05:00
Fred Isaman
4541d16c02 pnfs: change how lsegs are removed from layout list
This is to prepare the way for sensible io draining.  Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list.  Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:31 -05:00
Fred Isaman
fd6002e9b8 pnfs: change layout state seqlock to a spinlock
This prepares for future changes, where the layout state needs
to change atomically with several other variables.  In particular,
it will need to know if lo->segs is empty, as we test that instead
of manipulating the NFS_LAYOUT_STATEID_SET bit.  Moreover, the
layoutstateid is not really a read-mostly structure, as it is
written almost as often as it is read.

The behavior of pnfs_get_layout_stateid is also slightly changed, so that
it no longer changes the stateid.  Its name is changed to +pnfs_choose_layoutget_stateid.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:31 -05:00
Fred Isaman
b7edfaa198 pnfs: add prefix to struct pnfs_layout_hdr fields
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:31 -05:00
Fred Isaman
566052c53b pnfs: add prefix to struct pnfs_layout_segment fields
While we are renaming all the fields, change lo->state to lo->plh_flags.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06 14:46:31 -05:00
Trond Myklebust
1c787096fc NFSv4.1: Use more sensible names for 'initialize_mountpoint'
The initialize_mountpoint/uninitialise_mountpoint functions are really about
setting or clearing the layout driver to be used on this filesystem. Change
the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:11 -04:00
Andy Adamson
b1f69b754e NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
Add the ability to actually send LAYOUTGET and GETDEVICEINFO.  This also adds
in the machinery to handle layout state and the deviceid cache.  Note that
GETDEVICEINFO is not called directly by the generic layer.  Instead it
is called by the drivers while parsing the LAYOUTGET opaque data in response
to an unknown device id embedded therein.  RFC 5661 only encodes
device ids within the driver-specific opaque data.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00
Andy Adamson
974cec8ca0 NFS: client needs to maintain list of inodes with active layouts
In particular, server reboot will invalidate all layouts.

Note that in order to have an active layout, we must get a successful response
from the server.  To avoid adding that machinery, this patch just includes a
stub that fakes up a successful return.  Since the layout is never referenced
for io, this is not a problem.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00
Benny Halevy
e5e940170b NFS: create and destroy inode's layout cache
At the start of the io paths, try to grab the relevant layout
information.  This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00
Fred Isaman
02c35fca7c NFSv4.1: pnfs: full mount/umount infrastructure
Allow a module implementing a layout type to register, and
have its mount/umount routines called for filesystems that
the server declares support it.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00
Ricardo Labiaga
85e174ba6b NFS: set layout driver
Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.

In this patch, a stub is used that always returns "no driver found".

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00