Commit Graph

213 Commits

Author SHA1 Message Date
Yinghai Lu
55cd63676e x86: make zap_low_mapping could be used early
Only one cpu is there, just call __flush_tlb for it. Fixes the following boot
warning on x86:

  [    0.000000] Memory: 885032k/915540k available (5993k kernel code, 29844k reserved, 3842k data, 428k init, 0k highmem)
  [    0.000000] virtual kernel memory layout:
  [    0.000000]     fixmap  : 0xffe17000 - 0xfffff000   (1952 kB)
  [    0.000000]     vmalloc : 0xf8615000 - 0xffe15000   ( 120 MB)
  [    0.000000]     lowmem  : 0xc0000000 - 0xf7e15000   ( 894 MB)
  [    0.000000]       .init : 0xc19a5000 - 0xc1a10000   ( 428 kB)
  [    0.000000]       .data : 0xc15da4bb - 0xc199af6c   (3842 kB)
  [    0.000000]       .text : 0xc1000000 - 0xc15da4bb   (5993 kB)
  [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  [    0.000000] ------------[ cut here ]------------
  [    0.000000] WARNING: at kernel/smp.c:369 smp_call_function_many+0x50/0x1b0()
  [    0.000000] Hardware name: System Product Name
  [    0.000000] Modules linked in:
  [    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip #52504
  [    0.000000] Call Trace:
  [    0.000000]  [<c104aa16>] warn_slowpath_common+0x65/0x95
  [    0.000000]  [<c104aa58>] warn_slowpath_null+0x12/0x15
  [    0.000000]  [<c1073bbe>] smp_call_function_many+0x50/0x1b0
  [    0.000000]  [<c1037615>] ? do_flush_tlb_all+0x0/0x41
  [    0.000000]  [<c1037615>] ? do_flush_tlb_all+0x0/0x41
  [    0.000000]  [<c1073d4f>] smp_call_function+0x31/0x58
  [    0.000000]  [<c1037615>] ? do_flush_tlb_all+0x0/0x41
  [    0.000000]  [<c104f635>] on_each_cpu+0x26/0x65
  [    0.000000]  [<c10374b5>] flush_tlb_all+0x19/0x1b
  [    0.000000]  [<c1032ab3>] zap_low_mappings+0x4d/0x56
  [    0.000000]  [<c15d64b5>] ? printk+0x14/0x17
  [    0.000000]  [<c19b42a8>] mem_init+0x23d/0x245
  [    0.000000]  [<c19a56a1>] start_kernel+0x17a/0x2d5
  [    0.000000]  [<c19a5347>] ? unknown_bootoption+0x0/0x19a
  [    0.000000]  [<c19a5039>] __init_begin+0x39/0x41
  [    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-12 13:50:24 +03:00
Cyrill Gorcunov
103428e57b x86, apic: Fix dummy apic read operation together with broken MP handling
Ingo Molnar reported that read_apic is buggy novadays:

[    0.000000] Using APIC driver default
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/kernel/apic/apic.c:254 native_apic_read_dummy+0x2d/0x3b()
[    0.000000] Hardware name: HP OmniBook PC

Indeed we still rely on apic->read operation for SMP compiled
kernel. And instead of disfigure the SMP code with #ifdef we
allow to call apic->read. To capture any unexpected results
we check for apic->read being called for sane reason via
WARN_ON_ONCE but(!) instead of OR we should use AND logical
operation (thanks Yinghai for spotting the root of the problem).

Along with that we could be have bad MP table and we are
to fix it that way no SMP started and no complains about
BIOS bug if apic was just disabled via command line.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090607124840.GD4547@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 16:08:05 +02:00
Cyrill Gorcunov
cece3155d8 x86: smpboot - wakeup_secondary should be done via __cpuinit section
A caller (do_boot_cpu) already has __cpuinit attribute.

Since HOTPLUG_CPU depends on SMP && HOTPLUG it doesn't
lead to panic at moment.

[ Impact: cleanup ]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090418194528.GD25510@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-19 10:22:14 +02:00
Yinghai Lu
02421f98ec x86: consistent about warm_reset_vector for UN_NON_UNIQUE_APIC
Impact: cleanup

didn't set it for UV_NON_UNIQUE_APIC, so don't restore it

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49D6A6B9.6060501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 14:50:28 +02:00
Yinghai Lu
cdc1cb0d44 x86: make wakeup_secondary_cpu_via_init static
Impact: cleanup

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49D6A692.6040400@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 14:50:28 +02:00
Rusty Russell
4f0628963c cpumask: use new cpumask functions throughout x86
Impact: cleanup

1) &cpu_online_map -> cpu_online_mask
2) first_cpu/next_cpu_nr -> cpumask_first/cpumask_next
3) cpu_*_map manipulation -> init_cpu_* / set_cpu_*

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:54 +10:30
Rusty Russell
155dd720d0 cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
Impact: reduce kernel memory usage when CONFIG_CPUMASK_OFFSTACK=y

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:53 +10:30
Rusty Russell
c032ef60d1 cpumask: convert node_to_cpumask_map[] to cpumask_var_t
Impact: reduce kernel memory usage when CONFIG_CPUMASK_OFFSTACK=y

Straightforward conversion: done for 32 and 64 bit kernels.
node_to_cpumask_map is now a cpumask_var_t array.

64-bit used to be a dynamic cpumask_t array, and 32-bit used to be a
static cpumask_t array.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:53 +10:30
Rusty Russell
71ee73e722 x86: unify 32 and 64-bit node_to_cpumask_map
Impact: cleanup

We take the 64-bit code and use it on 32-bit as well.  The new file
is called mm/numa.c.

In a minor cleanup, we use cpu_none_mask instead of declaring a local
cpu_mask_none.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:52 +10:30
Rusty Russell
7ad728f981 cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t
Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y

In most places it's cleaner to use the accessors cpu_sibling_mask()
and cpu_core_mask() wrappers which already exist.

I couldn't avoid cleaning up the access in oprofile, either.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:50 +10:30
Rusty Russell
23c5c9c662 cpumask: remove cpu_coregroup_map: x86
Impact: cleanup

cpu_coregroup_mask is the New Hotness.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:48 +10:30
Yinghai Lu
1f442d70c8 x86: remove smp_apply_quirks()/smp_checks()
Impact: cleanup and code size reduction on 64-bit

This code is only applied to Intel Pentium and AMD K7 32-bit cpus.

Move those checks to intel_init()/amd_init() for 32-bit
so 64-bit will not build this code.

Also change to use cpu_index check to see if we need to emit warning.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49B377D2.8030108@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 16:22:56 +01:00
Ingo Molnar
1f5bcabf1b x86: apic: simplify secondary CPU wakeup methods
Impact: cleanup

- rename apic->wakeup_cpu  to apic->wakeup_secondary_cpu, to
  make it apparent that this is an SMP-only method

- handle NULL ->wakeup_secondary_cpus to mean the default INIT
  wakeup sequence - this allows simplification of the APIC
  driver templates.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 13:58:26 +01:00
Yinghai Lu
2b6163bf57 x86: remove update_apic from x86_quirks
Impact: cleanup

x86_quirks->update_apic() calling looks crazy. so try to remove it:

 1. every apic take wakeup_cpu member directly
 2. separate es7000_apic to es7000_apic_cluster
 3. use uv_wakeup_cpu directly

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 06:32:25 +01:00
Ingo Molnar
ab6fb7c0b0 x86, apic: remove ->store_NMI_vector()
Impact: cleanup

It's not used by anything anymore.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:53:56 +01:00
Ingo Molnar
e641f5f525 x86, apic: remove duplicate asm/apic.h inclusions
Impact: cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar
7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Yinghai Lu
06cd9a7dc8 x86: add x2apic config
Impact: cleanup

so could deselect x2apic
and INTR_REMAP will select x2apic

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 12:22:20 +01:00
Yinghai Lu
88d0f550d7 x86: make 32bit to call enable_IO_APIC early like 64bit
Impact: cleanup

So we remove some #ifdefs.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 13:23:46 +01:00
Ingo Molnar
eca217b36e Merge branch 'x86/paravirt' into x86/apic
Conflicts:
	arch/x86/mach-voyager/voyager_smp.c
2009-02-09 12:16:59 +01:00
Ingo Molnar
65a4e574d2 smp, generic: introduce arch_disable_smp_support() instead of disable_ioapic_setup()
Impact: cleanup

disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.

Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:27:54 +01:00
Brian Gerst
552be871e6 x86: pass in cpu number to switch_to_new_gdt()
Impact: cleanup, prepare for xen boot fix.

Xen needs to call this function very early to setup the GDT and
per-cpu segments.  Remove the call to smp_processor_id() and just
pass in the cpu number.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31 14:28:50 +09:00
Ingo Molnar
8f47e16348 x86: update copyrights
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31 04:21:18 +01:00
Yinghai Lu
26f7ef14a7 x86: don't treat bigsmp as non-standard
just like 64 bit switch from flat logical APIC messages to
flat physical mode automatically.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 15:24:37 +01:00
Yinghai Lu
1ff2f20de3 x86: fix compiling with 64bit with def_to_bigsmp
only need to do cut off with 32bit

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 15:21:23 +01:00
Yinghai Lu
4272ebfbef x86: allow more than 8 cpus to be used on 32-bit
X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.

This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 00:20:22 +01:00
Ingo Molnar
e0c7ae376a x86: rename X86_GENERICARCH to X86_32_NON_STANDARD
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.

Rename it to X86_32_NON_STANDARD.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:17:20 +01:00
Ingo Molnar
c0b5842a45 x86: generalize boot_cpu_id
x86/Voyager can boot on non-zero processors. While that can probably
be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id
for now for easier transition - and expand it to all of x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:17:01 +01:00
Ingo Molnar
1164dd0099 x86: move mach-default/*.h files to asm/
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:51 +01:00
Ingo Molnar
1dcdd3d15e x86: remove mach_apic.h
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects
on smp.h and apic.h.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:42 +01:00
Ingo Molnar
328386d7ab x86, smp: refactor ->wake_cpu
- remove macro wrappers

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:37 +01:00
Ingo Molnar
0939e4fd35 x86, smp: eliminate asm/mach-default/mach_wakecpu.h
Spread mach_wakecpu.h's definitions into apic.h and genapic.h
and remove mach_wakecpu.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:35 +01:00
Ingo Molnar
25dc004903 x86, smp: refactor ->inquire_remote_apic() methods
Nothing exciting - a few subarches dont want APIC remote reads to
be performed - the others are content with the default method.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:34 +01:00
Ingo Molnar
7bd06ec63a x86, smp: refactor ->store/restore_NMI_vector() methods
Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
store and restore the NMI vector.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:33 +01:00
Ingo Molnar
333344d943 x86, smp: refactor ->smp_callin_clear_local_apic() methods
Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
reset the APIC.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:33 +01:00
Ingo Molnar
a965936643 x86, smp: refactor ->wait_for_init_deassert()
- spread out the namespace on a per APIC driver basis

 - handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method

 - remove NUMAQ and Summit handlers

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:32 +01:00
Ingo Molnar
a27a621001 x86: refactor ->check_phys_apicid_present() subarch methods
- spread out the namespace to per driver methods

 - extend it to 64-bit as well so that we can use
   apic->check_phys_apicid_present() unconditionally

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:25 +01:00
Ingo Molnar
d83093b504 x86: refactor ->setup_portio_remap() subarch methods
Only NUMAQ has a real ->setup_portio_remap() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.

Also move the NUMAQ method from the header file into the
 apic driver .c file.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:25 +01:00
Ingo Molnar
a21769a446 x86, apic: clean up ->cpu_present_to_apicid()
- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:24 +01:00
Ingo Molnar
3f57a318c3 x86, apic: clean up ->apicid_to_node()
- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:23 +01:00
Ingo Molnar
72ce016583 x86, apic: clean up ->setup_apic_routing()
- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:22 +01:00
Ingo Molnar
bdb1a9b62f x86, apic: rename genapic::apic_destination_logical to genapic::dest_logical
This field name was unreasonably long - shorten it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:19 +01:00
Ingo Molnar
0b06e734bf x86: clean up the APIC_DEST_LOGICAL logic
Impact: cleanup

The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in
a rather nasty way by re-defining it to zero. That is infinitely
fragile and makes it very hard to see what to code really does in
a given context. The very same constant has different meanings and
values - depending on which subarch is enabled.

Untangle this mess by never undefining the constant, but instead
propagating the right values into the genapic driver templates.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:18 +01:00
Brian Gerst
b2d2f4312b x86: initialize per-cpu GDT segment in per-cpu setup
Impact: cleanup

Rename init_gdt() to setup_percpu_segment(), and move it to
setup_percpu.c.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:48 +09:00
Tejun Heo
bdbcdd4888 x86: uv cleanup
Impact: cleanup

Make the following uv related cleanups.

* collect visible uv related definitions and interfaces into uv/uv.h
  and use it.  this cleans up the messy situation where on 64bit, uv
  is defined properly, on 32bit generic it's dummy and on the rest
  undefined.  after this clean up, uv is defined on 64 and dummy on
  32.

* update uv_flush_tlb_others() such that it takes cpumask of
  to-be-flushed cpus as argument, instead of that minus self, and
  returns yet-to-be-flushed cpumask, instead of modifying the passed
  in parameter.  this interface change will ease dummy implementation
  of uv_flush_tlb_others() and makes uv tlb flush related stuff
  defined in tlb_uv proper.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21 17:26:06 +09:00
Brian Gerst
9af45651f1 x86-64: Move kernelstack from PDA to per-cpu.
Also clean up PER_CPU_VAR usage in xen-asm_64.S

tj: * remove now unused stack_thread_info()
    * s/kernelstack/kernel_stack/
    * added FIXME comment in xen-asm_64.S

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19 00:38:58 +09:00
Brian Gerst
c6f5e0acd5 x86-64: Move current task from PDA to per-cpu and consolidate with 32-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19 00:38:58 +09:00
Tejun Heo
004aa322f8 x86: misc clean up after the percpu update
Do the following cleanups:

* kill x86_64_init_pda() which now is equivalent to pda_init()

* use per_cpu_offset() instead of cpu_pda() when initializing
  initial_gs

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:20:26 +01:00
Tejun Heo
1a51e3a0ae x86: fold pda into percpu area on SMP
[ Based on original patch from Christoph Lameter and Mike Travis. ]

Currently pdas and percpu areas are allocated separately.  %gs points
to local pda and percpu area can be reached using pda->data_offset.
This patch folds pda into percpu area.

Due to strange gcc requirement, pda needs to be at the beginning of
the percpu area so that pda->stack_canary is at %gs:40.  To achieve
this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is
added and used to reserve pda sized chunk at the start of the percpu
area.

After this change, for boot cpu, %gs first points to pda in the
data.init area and later during setup_per_cpu_areas() gets updated to
point to the actual pda.  This means that setup_per_cpu_areas() need
to reload %gs for CPU0 while clearing pda area for other cpus as cpu0
already has modified it when control reaches setup_per_cpu_areas().

This patch also removes now unnecessary get_local_pda() and its call
sites.

A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:46 +01:00
Tejun Heo
f32ff5388d x86: load pointer to pda into %gs while brining up a CPU
[ Based on original patch from Christoph Lameter and Mike Travis. ]

CPU startup code in head_64.S loaded address of a zero page into %gs
for temporary use till pda is loaded but address to the actual pda is
available at the point.  Load the real address directly instead.

This will help unifying percpu and pda handling later on.

This patch is mostly taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-16 14:19:26 +01:00