Commit Graph

5378 Commits

Author SHA1 Message Date
Linus Torvalds
395d73413c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
  ext4: Regularize mount options
  ext4: fix locking typo in mballoc which could cause soft lockup hangs
  ext4: fix typo which causes a memory leak on error path
  jbd2: Update locking coments
  ext4: Rename pa_linear to pa_type
  ext4: add checks of block references for non-extent inodes
  ext4: Check for an valid i_mode when reading the inode from disk
  ext4: Use WRITE_SYNC for commits which are caused by fsync()
  ext4: Add auto_da_alloc mount option
  ext4: Use struct flex_groups to calculate get_orlov_stats()
  ext4: Use atomic_t's in struct flex_groups
  ext4: remove /proc tuning knobs
  ext4: Add sysfs support
  ext4: Track lifetime disk writes
  ext4: Fix discard of inode prealloc space with delayed allocation.
  ext4: Automatically allocate delay allocated blocks on rename
  ext4: Automatically allocate delay allocated blocks on close
  ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
  ext4: Simplify delalloc code by removing mpage_da_writepages()
  ext4: Save stack space by removing fake buffer heads
  ...
2009-04-01 10:57:49 -07:00
Linus Torvalds
e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Krzysztof Helt
ddb53d48da fbdev: remove cyblafb driver
A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.

Changes to the tridentfb driver:

- FBINFO_READS_FAST added to the tridentfb.  The cyblafb used a blitter
  for scrolling which is faster than color expansion on Cyberblade
  chipsets.  The blitter is slower on a discrete Blade3D core.  Use the
  blitter for scrolling in the tridentfb only for integrated Blade3D
  cores.  Now, scrolling speed is about equal for the tridentfb and the
  cyblafb.

- a copyright notice addition is done on request of Jani Monoses (the
  first author of the tridentfb).

Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north  bridge (aka Cyberblade/i1).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:33 -07:00
Anton Vorontsov
3f1c6ebf57 powerpc: add mmc-spi-slot bindings
The bindings describes a case where MMC/SD/SDIO slot directly connected to
a SPI bus.  Such setups are widely used on embedded PowerPC boards.

The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias
table.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:23 -07:00
Ira Snyder
72f5de92e1 hwmon: Add LTC4215 driver
Add Linux support for the Linear Technology LTC4215 Hot Swap controller
I2C monitoring interface.

I have tested the driver with my board, and it appears to work fine.  With
the power supplies disabled, it reads 11.93V input, 1.93V output, no
current and no power.  With the supplies enabled, it reads 11.93V input,
11.98V output, no current, no power.  I'm not drawing any current at the
moment, so this is reasonable.  The value in the sense register never
reads anything except 0, so I expect to get zero from the current and
power calculations.

I didn't attempt to support changing any of the chip's settings or
enabling the FET.  I'm not sure even how to do that and still fit within
the hwmon framework.  :)

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:21 -07:00
Pavel Machek
2b872903c5 hp_accel: small documentation updates
Fix english in Documentation, add "how to test" description.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Vladimir Botka <vbotka@suse.cz>
Cc: <Quoc.Pham@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:21 -07:00
Daniel Mack
3cdbbeebb7 drivers/misc/isl29003.c: driver for the ISL29003 ambient light sensor
Add a driver for Intersil's ISL29003 ambient light sensor device plus some
documentation.  Inspired by tsl2550.c, a driver for a similar device.

It is put in drivers/misc for now until the industrial I/O framework gets
merged.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:18 -07:00
Eric Sandeen
c2d7543851 filesystem freeze: allow SysRq emergency thaw to thaw frozen filesystems
Now that the filesystem freeze operation has been elevated to the VFS, and
is just an ioctl away, some sort of safety net for unintentionally frozen
root filesystems may be in order.

The timeout thaw originally proposed did not get merged, but perhaps
something like this would be useful in emergencies.

For example, freeze /path/to/mountpoint may freeze your root filesystem if
you forgot that you had that unmounted.

I chose 'j' as the last remaining character other than 'h' which is sort
of reserved for help (because help is generated on any unknown character).

I've tested this on a non-root fs with multiple (nested) freezers, as well
as on a system rendered unresponsive due to a frozen root fs.

[randy.dunlap@oracle.com: emergency thaw only if CONFIG_BLOCK enabled]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:17 -07:00
Nick Piggin
c2ec175c39 mm: page_mkwrite change prototype to match fault
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags.  There should be no functional change.

This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg.  virtual_address to the
driver, which might be important in some special cases).

This is required for a subsequent fix.  And will also make it easier to
merge page_mkwrite() with fault() in future.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:14 -07:00
Ravikiran G Thirumalai
2584e51732 mm: reintroduce and deprecate rlimit based access for SHM_HUGETLB
Allow non root users with sufficient mlock rlimits to be able to allocate
hugetlb backed shm for now.  Deprecate this though.  This is being
deprecated because the mlock based rlimit checks for SHM_HUGETLB is not
consistent with mmap based huge page allocations.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:12 -07:00
Linus Torvalds
db6f204019 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio:
  lguest: barrier me harder
  lguest: use bool instead of int
  lguest: use KVM hypercalls
  lguest: wire up pte_update/pte_update_defer
  lguest: fix spurious BUG_ON() on invalid guest stack.
  virtio: more neatening of virtio_ring macros.
  virtio: fix BAD_RING, START_US and END_USE macros
2009-03-30 17:57:39 -07:00
Linus Torvalds
3c6fae67d0 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (fschmd) Add support for the FSC Hades IC
  hwmon: (fschmd) Add support for the FSC Syleus IC
  i2c-i801: Instantiate FSC hardware montioring chips
  dmi: Let dmi_walk() users pass private data
  hwmon: Define a standard interface for chassis intrusion detection
  Move the pcf8591 driver to hwmon
  hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG
  hwmon: (w83627ehf) Add support for W83667HG
  hwmon: (w83627ehf) Invert fan pin variables logic
  hwmon: (hdaps) Fix Thinkpad X41 axis inversion
  hwmon: (hdaps) Allow inversion of separate axis
  hwmon: (ds1621) Clean up documentation
  hwmon: (ds1621) Avoid unneeded register access
  hwmon: (ds1621) Clean up register access
  hwmon: (ds1621) Reorder code statements
2009-03-30 17:54:32 -07:00
Linus Torvalds
c4e1aa67ed Merge branch 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (33 commits)
  lockdep: fix deadlock in lockdep_trace_alloc
  lockdep: annotate reclaim context (__GFP_NOFS), fix SLOB
  lockdep: annotate reclaim context (__GFP_NOFS), fix
  lockdep: build fix for !PROVE_LOCKING
  lockstat: warn about disabled lock debugging
  lockdep: use stringify.h
  lockdep: simplify check_prev_add_irq()
  lockdep: get_user_chars() redo
  lockdep: simplify get_user_chars()
  lockdep: add comments to mark_lock_irq()
  lockdep: remove macro usage from mark_held_locks()
  lockdep: fully reduce mark_lock_irq()
  lockdep: merge the !_READ mark_lock_irq() helpers
  lockdep: merge the _READ mark_lock_irq() helpers
  lockdep: simplify mark_lock_irq() helpers #3
  lockdep: further simplify mark_lock_irq() helpers
  lockdep: simplify the mark_lock_irq() helpers
  lockdep: split up mark_lock_irq()
  lockdep: generate usage strings
  lockdep: generate the state bit definitions
  ...
2009-03-30 17:17:35 -07:00
Linus Torvalds
cf2f7d7c90 Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  Revert "proc: revert /proc/uptime to ->read_proc hook"
  proc 2/2: remove struct proc_dir_entry::owner
  proc 1/2: do PDE usecounting even for ->read_proc, ->write_proc
  proc: fix sparse warnings in pagemap_read()
  proc: move fs/proc/inode-alloc.txt comment into a source file
2009-03-30 16:06:04 -07:00
Alexey Dobriyan
99b7623380 proc 2/2: remove struct proc_dir_entry::owner
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-31 01:14:44 +04:00
Linus Torvalds
712b0006bf Merge branch 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  dma-debug: make memory range checks more consistent
  dma-debug: warn of unmapping an invalid dma address
  dma-debug: fix dma_debug_add_bus() definition for !CONFIG_DMA_API_DEBUG
  dma-debug/x86: register pci bus for dma-debug leak detection
  dma-debug: add a check dma memory leaks
  dma-debug: add checks for kernel text and rodata
  dma-debug: print stacktrace of mapping path on unmap error
  dma-debug: Documentation update
  dma-debug: x86 architecture bindings
  dma-debug: add function to dump dma mappings
  dma-debug: add checks for sync_single_sg_*
  dma-debug: add checks for sync_single_range_*
  dma-debug: add checks for sync_single_*
  dma-debug: add checking for [alloc|free]_coherent
  dma-debug: add add checking for map/unmap_sg
  dma-debug: add checking for map/unmap_page/single
  dma-debug: add core checking functions
  dma-debug: add debugfs interface
  dma-debug: add kernel command line parameters
  dma-debug: add initialization code
  ...

Fix trivial conflicts due to whitespace changes in arch/x86/kernel/pci-nommu.c
2009-03-30 13:41:00 -07:00
Jean Delvare
ec19920944 hwmon: Define a standard interface for chassis intrusion detection
Define a standard interface for the chassis intrusion detection feature
some hardware monitoring chips have. Some drivers have custom sysfs
entries for it, but a standard interface would allow integration with
user-space (namely libsensors.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Matt Roberds <mattroberds@cox.net>
2009-03-30 21:46:44 +02:00
Jean Delvare
fb4504fe84 Move the pcf8591 driver to hwmon
Directory drivers/i2c/chips is going away, so drivers there must find
new homes. For the pcf8591 driver, the best choice seems to be the
hwmon subsystem. While the Philips PCF8591 device isn't a typical
hardware monitoring chip, its DAC interface is compatible with the
hwmon one, so it fits somewhat.

If a better subsystem is ever created for ADC/DAC chips, the driver
could be moved there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:43 +02:00
Gong Jun
237c8d2f54 hwmon: (w83627ehf) Add support for W83667HG
Add initial support for the Nuvoton W83667HG chip to the w83627ehf
driver. It has been tested on ASUS P5QL PRO by Gong Jun.

At the moment there is still a usability issue which is that only in6
or temp3 can be present on the W83667HG, so the driver shouldn't
expose both. This will be addressed later.

Signed-off-by: Gong Jun <JGong@nuvoton.com>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30 21:46:42 +02:00
Jean Delvare
25f3311acc hwmon: (ds1621) Clean up documentation
* The alarms sysfs file is deprecated, and individual alarm files are
  self-explanatory.
* The driver doesn't implement high-reslution temperature readings so
  don't document that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:41 +02:00
Linus Torvalds
019abbc870 Merge branch 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits)
  Revert "cpuacct: reduce one NULL check in fast-path"
  Revert "x86: don't compile vsmp_64 for 32bit"
  x86: Correct behaviour of irq affinity
  x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe
  x86: use default_cpu_mask_to_apicid for 64bit
  x86: fix set_extra_move_desc calling
  x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot
  x86/dmi: fix dmi_alloc() section mismatches
  x86: e820 fix various signedness issues in setup.c and e820.c
  x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time
  x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together
  x86: irq.c use same path for show_interrupts
  x86: cpu/cpu.h cleanup
  x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c
  Revert "x86: create a non-zero sized bm_pte only when needed"
  x86: pci-nommu.c cleanup
  x86: io_delay.c cleanup
  x86: rtc.c cleanup
  x86: i8253 cleanup
  x86: kdebugfs.c cleanup
  ...
2009-03-30 11:38:31 -07:00
Linus Torvalds
ebc8eca169 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits)
  powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
  powerpc/85xx: Add support for the "socrates" board (MPC8544).
  powerpc: Fix bugs introduced by sysfs changes
  powerpc: Sanitize stack pointer in signal handling code
  powerpc: Add write barrier before enabling DTL flags
  powerpc/83xx: Update ranges in gianfar node to match other dts
  powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Add power management support for MPC837x boards
  powerpc/mm: Introduce early_init_mmu() on 64-bit
  powerpc/mm: Add option for non-atomic PTE updates to ppc64
  powerpc/mm: Fix printk type warning in mmu_context_nohash
  powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
  powerpc/mm: Merge various PTE bits and accessors definitions
  powerpc/mm: Tweak PTE bit combination definitions
  powerpc/cell: Fix iommu exception reporting
  powerpc/mm: e300c2/c3/c4 TLB errata workaround
  powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
  powerpc/mm: Remove unused register usage in SW TLB miss handling
  ...
2009-03-30 10:23:53 -07:00
Mauro Carvalho Chehab
aeecea2623 V4L/DVB (11225): v4lgrab: fix compilation warnings
Documentation/video4linux/v4lgrab.c: In function ‘main’:
Documentation/video4linux/v4lgrab.c:193: warning: ‘src_depth’ is used uninitialized in this function
Documentation/video4linux/v4lgrab.c:108: warning: ‘b’ may be used uninitialized in this function
Documentation/video4linux/v4lgrab.c:108: warning: ‘g’ may be used uninitialized in this function
Documentation/video4linux/v4lgrab.c:108: warning: ‘r’ may be used uninitialized in this function

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:41 -03:00
Jean-Francois Moine
7ddfda9aa6 V4L/DVB (11223): gspca - doc: Add the 15b8:6001 webcam to the Documentation.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:41 -03:00
Mauro Carvalho Chehab
f65a95bbf4 V4L/DVB (11138): get_dvb_firmware: add support for downloading the cx2584x firmware for pvrusb2
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Mauro Carvalho Chehab
5297e6f7e9 V4L/DVB (11137): get_dvb_firmware: add cx23885 firmwares
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Mauro Carvalho Chehab
b888c5dadb V4L/DVB (11136): get_dvb_firmware: Add download code for cx18 firmwares
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Alan McIvor
dceaddb978 V4L/DVB (11124): Add support for ProVideo PV-183 to bttv
Add support for ProVideo PV-183 to bttv

This patch adds support for the ProVideo PV-183 card to the bttv
device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint
Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels
available. There are no tuners on this card.

Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Mauro Carvalho Chehab
06e9509ff3 V4L/DVB (11108): get_dvb_firmware: Add option to download firmware for cx231xx
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:29 -03:00
Hans Verkuil
15965f063d V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:23 -03:00
Hans Verkuil
ae6cfaace1 V4L/DVB (11044): v4l2-device: add v4l2_device_disconnect
Call v4l2_device_disconnect when the parent of a hotpluggable device
disconnects. This ensures that you do not have a pointer to a device that
is no longer present.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Jean-Francois Moine
71cb2764fc V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Hans Verkuil
98ec633972 V4L/DVB (11021): v4l2-device: add a notify callback.
Add a notify callback to v4l2_device to let sub-devices notify their
parent of special events.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:20 -03:00
Hans Verkuil
005759613b V4L/DVB (10988): v4l2-dev: use parent field if the v4l2_device has no parent set.
Normally the parent device of v4l2_device is used as the video device
node's parent. But if it was not set, then use the parent field in the
video_device struct.

This is needed in the cx88 driver, which has one core v4l2_device but
creates multiple pci devices (one each for raw and mpeg video).

So you cannot associate the core v4l2_device with a particular PCI device,
but you can do that for each video_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:20 -03:00
Hans Verkuil
2c79252326 V4L/DVB (10980): doc: improve the v4l2-framework documentation.
Emphasize the need to call i2c_set_adapdata and clarify the use of the
chipid in v4l2_i2c_new_(probed_)device().

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:19 -03:00
Stephan Wienczny
70101a2785 V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKII
This patch adds support for Terratec Cinergy HT PCI MKII with card id 79.
Its more or less a copy of Pinnacle Hybrid PCTV.
Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card.

Signed-off-by: Stephan Wienczny <stephan@wienczny.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:18 -03:00
Robert Millan
76ecf4599e V4L/DVB (10944): Conceptronic CTVFMI2 PCI Id
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch
that adds its PCI id.

lspci -nnv output:

05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)

Press <break> within 3 seconds if this is wrong.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:17 -03:00
Jean Delvare
4dbf46a048 V4L/DVB (10931): zoran: Drop the lock_norm module parameter
The lock_norm module parameter doesn't look terribly useful. If you
don't want to change the norm, just don't change it. As a matter of
fact, no other v4l driver has such a parameter.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:16 -03:00
Michael Krufky
3abdedd8a4 V4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:16 -03:00
Michael Krufky
e8944282a7 V4L/DVB (10923): saa7134: fix typo in product name
replace occurances of "HVR1150" with "HVR1120" - this was a typo.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:16 -03:00
Hans Verkuil
cf5193c740 V4L/DVB (10909): tvmixer: remove last remaining references to this deleted module.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:15 -03:00
Mauro Carvalho Chehab
42d12f5aa1 V4L/DVB (10870a): remove all references for video_decoder.h
changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.

Let's remove it and all references for it in Kernel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:15 -03:00
Michael Krufky
f9996c9562 V4L/DVB (10877): saa7134: add analog support for Hauppauge HVR1110r3 boards
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:12 -03:00
Bruno Christo
0c5db42551 V4L/DVB (10827): Add support for GeoVision GV-800(S)
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .

This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.

The GV-800(S) is identified as follows:

...
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)

...
02:00.0 0400: 109e:036e (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdfff000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:00.1 0480: 109e:0878 (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffe000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:04.0 0400: 109e:036e (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffd000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:04.1 0480: 109e:0878 (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffc000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:08.0 0400: 109e:036e (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffb000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:08.1 0480: 109e:0878 (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffa000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:0c.0 0400: 109e:036e (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff9000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:0c.1 0480: 109e:0878 (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff8000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.

After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.

I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.

Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:07 -03:00
Igor M. Liplianin
5a23b0762c V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:05 -03:00
Douglas Schilling Landgraf
ac40d9e098 V4L/DVB (10741): em28xx: Add Kaiser Baas Video to DVD maker support
Added usb vendor/product id for Kaiser Baas Video to DVD maker.
Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:00 -03:00
Douglas Schilling Landgraf
1f372a930c V4L/DVB (10740): em28xx-cards: Add SIIG AVTuner-PVR board
Added SIIG AVTuner-PVR to the right entry.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Douglas Schilling Landgraf
812c582390 V4L/DVB (10739): em28xx-cards: remove incorrect entry
Removed EM2821_BOARD_PROLINK_PLAYTV_USB2 entry.
This entry has a incorrect tuner set.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Mauro Carvalho Chehab
cc1139c7cd V4L/DVB(10738a): remove include/linux/video_encoder.h
include/linux/video_encoder.h is not used anymore by a v4l driver.
Let's remove it and its occurences.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Hans Verkuil
b016760054 V4L/DVB (10644): v4l2-subdev: rename dev field to v4l2_dev
Remain consistent in the naming: fields pointing to v4l2_device should
be called v4l2_dev. There are too many device-like entities without
adding to the confusion by mixing naming conventions.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:50 -03:00