Commit Graph

28 Commits

Author SHA1 Message Date
Jerry Hicks
4a22442fae [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
The device id for Am29DL800BB in jedec_probe.c is wrong.

Reference: http://www.spansion.com/datasheets/21519c4.pdf

I discovered this while working with u-boot.

The u-boot folks mentioned Linux as an upstream reference, thought I'd
post a heads-up here too.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-31 08:34:46 +01:00
Atsushi Nemoto
ca6f12c67e [MTD] jedec_probe: Fix SST 16-bit chip detection
The unlock_addr rework in kernel 2.6.25 breaks 16-bit SST chips.  SST
39LF160 and SST 39VF1601 are both 16-bit only chip (do not have BYTE#
pin) and new uaddr value is not correct for them.  Add
MTD_UADDR_0xAAAA_0x5555 for those chips.  Tested with SST 39VF1601
chip.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25 10:02:47 -04:00
Adrian Bunk
59018b6d2a MTD/JFFS2: remove CVS keywords
Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:50:17 +01:00
Mike Rapoport
1b0b30acf3 [MTD] [NOR] Add support for Eon EN29SL800B[BT] NOR flash chips
This patch add support for non-CFI Eon EN29SL800B[BT] NOR flash chips.
The Eon chips have manufacturer ID in the first bank, therefore this patch
depends on support for flash chips with ID in bank other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:23:12 +01:00
Mike Rapoport
5c9c11e1c4 [MTD] [NOR] Add support for flash chips with ID in bank other than 0
According to JEDEC "Standard Manufacturer's Identification Code"
(http://www.jedec.org/download/search/jep106W.pdf)
several first banks of NOR flash can contain 0x7f instead of actual ID.
This patch adds support for reading manufacturer ID from banks other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:22:59 +01:00
Mike Rapoport
8fd310a1cc [MTD] [NOR] Add support for AMD AM29SL800D[BT] NOR flash chips
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:20:48 +01:00
Nate Case
deb1a5f113 [MTD] [NOR] Support for M50FLW080A and M50FLW080B
Add support for M50FLW080A and M50FLW080B revisions of LPC flash
devices.

Signed-off-by: Aaron Lindner <alindner@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-14 11:03:46 +01:00
Andrei Dolnikov
1b0a062be7 [MTD] [NOR] Add JEDEC support for the SST 36VF3203 flash chip
Add support for the SST 36VF3203 flash chip. It is used on Emerson 
KSI8560 board.

Signed-off-by: Andrei Dolnikov <adolnikov@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 20:24:59 +01:00
David Woodhouse
35d086b143 [MTD] [JEDEC] Fix whitespace noise in chip table
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:54 +01:00
Gordon Farquharson
30d6a24eb8 [MTD] [JEDEC] add support for the ST M29W400DB flash chip
Add support for the ST M29W400DB flash chip.  which is used on the GLAN Tank
NAS.

Signed-off-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:52 +01:00
Ilpo Järvinen
c0d2a48a65 [MTD] jedec probe: drop unnecessary forward declarations
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 17:58:05 +11:00
Ilpo Järvinen
53d8855392 [MTD] JEDEC probe: kill some inline bloat
$ codiff $OBJ.old $OBJ
drivers/mtd/chips/jedec_probe.c:
  cfi_jedec_setup  | -320
  jedec_probe_chip | -7073
 2 functions changed, 7393 bytes removed, diff: -7393

drivers/mtd/chips/jedec_probe.c:
  jedec_reset | +1151
 1 function changed, 1151 bytes added, diff: +1151

drivers/mtd/chips/jedec_probe.o:
 3 functions changed, 1151 bytes added, 7393 bytes removed, diff: -6242

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 17:55:41 +11:00
David Woodhouse
cec80bf2cc [MTD] [NOR] Attempt to clean up the JEDEC unlock address confusion
Use a single unlock address, adjust it for the device type in the
knowledge that it'll be adjusted back again. This has the desirable
effect of masking out the least significant bit of the address for x16
devices.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 13:01:21 +00:00
David Woodhouse
f6f0f81895 [MTD] [NOR] Fix overflow check in jedec_probe
Having laid the code out so that it's easier to read instead of sticking
to the 80-column guideline even when it doesn't make sense, a bug is
immediately spotted... we were only checking _one_ of the unlock
addresses to see if it runs off the end of the map.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:49:38 +00:00
David Woodhouse
5d3cce3b8e [MTD] [NOR] Clean up jedec_probe, remove unlock address arrays
This should have no functional effects -- we've been ignoring all but
the first address in the array for a long time, and using it only to
indicate which device types are supported.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:48:57 +00:00
David Howells
8547e583a1 [MTD] [NOR] Add support for the SST 39VF1601 flash chip
Add support for the SST 39VF1601 flash chip.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-09 22:34:07 +00:00
Jesper Juhl
4cfff0db3a [MTD] Clean up duplicate includes in drivers/mtd/
This patch cleans up duplicate includes in
	drivers/mtd/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-23 11:56:27 +01:00
Philippe De Muyter
c9856e39e0 [MTD] [NOR] add FUJITSU MBM29F800BA and ST M29F800AB descriptions
Add descriptions for Fujitsu MBM29F800BA and ST M29F800AB flash chips.
Those chips are compatible (except for the ids) with the AMD AM29F800BB.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-05 23:29:49 -04:00
Alexey Dobriyan
f33686b5a7 [MTD] JEDEC probe: fix comment typo (devic)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-21 16:22:04 +01:00
Ryan Jackson
89072ef993 [MTD] CHIPS: Support for SST 49LF040B flash chip
Add chip driver and JEDEC probe support for the SST 49LF040B flash chip.

Signed-off-by: Ryan Jackson <rjackson@lnxi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-21 16:18:51 +01:00
Takashi YOSHI
c4e6952ffd [PATCH] MTD: Add Macronix MX29F040 to JEDEC
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-08-14 19:48:30 -05:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Pavel Machek
a63ec1b7b7 [PATCH] Add chip used in collie to jedec_probe
This adds flash chip used in Sharp Zaurus sl5500 (collie) to jedec_probe.
Values work for read-only access, but I have not figured out how to do
read-write.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:49 -08:00
Tobias Klauser
87d10f3c79 [PATCH] drivers/mtd: Use ARRAY_SIZE macro
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of the macro.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:48 -08:00
Thomas Gleixner
1f948b43f7 [MTD] chips: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 14:45:15 +01:00
Ben Dooks
88ec7c50bf [MTD] Add SST 39VF1601 (MPF+) ID
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23 12:34:00 +02:00
Ben Dooks
011b2a3627 [MTD] Fixup probing logic for single 16bit devices
The change to the generic probe to look for the
smallest width of chip first is causing some problems
on boards with a single 16bit device.

The problem seems to be the jedec_match() is truncating
the device-id read from the table to match against the
one read from the hardware, causing a match against the
partial id of some chips with 16bit IDs (such as the
SST39LF160)

This fixes things for my own board, but something may
need to be done if the same problem is exhibited for
chips with an 8bit ID

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23 12:33:26 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00