Commit Graph

443 Commits

Author SHA1 Message Date
Linus Torvalds
7b6181e068 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25 13:46:56 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds
c37927d435 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22 10:49:54 -07:00
Linus Torvalds
d4429f608a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc/44x: Update ppc44x_defconfig
  powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option
  fsl_rio: Add comments for sRIO registers.
  powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig
  powerpc/fsl-booke: Add p5020 DS board support
  powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips
  powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes
  powerpc/fsl-booke: Add support for FSL 64-bit e5500 core
  powerpc/85xx: add cache-sram support
  powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board
  powerpc: Fix compile error with paca code on ppc64e
  powerpc/fsl-booke: Add p3041 DS board support
  oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt.
  powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips
  powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers
  powerpc/fsl_booke: Add support to boot from core other than 0
  powerpc/p1022: Add probing for individual DMA channels
  powerpc/fsl_soc: Search all global-utilities nodes for rstccr
  powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT
  powerpc/mpc83xx: Support for MPC8308 P1M board
  ...

Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c
2010-10-21 21:19:54 -07:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Timur Tabi
e0dc09ff9a powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option
The PowerPC Book-E watchdog driver (booke_wdt.c) defines a default timeout
value in the code based on whether it's a Freescale Book-E part of not.
Instead of having hard-coded values in the driver, make it a Kconfig
option.

As newer chips gets faster, the current default values become less
appropriate, since the timeout sometimes occurs before the kernel finishes
booting.  Making the value a Kconfig option allows BSPs to configure a new
value without requiring the wdt_period command-line parameter to be set.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14 01:05:32 -05:00
Timur Tabi
fbdd7144ce powerpc/watchdog: Allow the Book-E driver to be compiled as a module
Register the __init and __exit functions in the PowerPC Book-E Watchdog
driver as module entry/exit functions, and modify the Kconfig entry.

Add a .release method for the PowerPC Book-E Watchdog driver, so that the
watchdog is disabled when the driver is closed.

Loosely based on original code from Jiang Yutang <b14898@freescale.com>.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14 00:52:44 -05:00
David Howells
ca4d3e6746 MIPS: Add missing #inclusions of <linux/irq.h>
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should
really include it.  Note that this can replace #inclusions of <asm/irq.h>.

This is required for the patch to sort out irqflags handling function naming to
compile on MIPS.

The problem is that these files require access to things like setup_irq() -
which isn't available by #including <linux/interrupt.h>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-07 14:08:54 +01:00
Arnd Bergmann
613655fa39 drivers: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.

None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.

Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.

These drivers do not seem to be under active
maintainance from my brief investigation. Apologies
to those maintainers that I have missed.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 15:01:04 +02:00
Varadarajan, Charulatha
7ec5ad0f3c OMAP: WDT: Use PM runtime APIs instead of clk FW APIs
Call runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync()
for enabling/disabling the clocks, sysconfig settings instead of using
clock FW APIs.

Signed-off-by: Charulatha V <charu@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29 12:21:58 -07:00
Kevin Wells
0a18e15598 watchdog: Enable NXP LPC32XX support in Kconfig (resend)
The NXP LPC32XX processor use the same watchdog as the Philips
PNX4008 processor.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15 18:43:58 +00:00
Mika Westerberg
0e901bed4e watchdog: ts72xx_wdt: disable watchdog at probe
Since it may be already enabled by bootloader or some other utility. This patch
makes sure that the watchdog is disabled before any userspace daemon opens the
device. It is also required by the watchdog API.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15 18:43:52 +00:00
Akinobu Mita
ae44855ae8 watchdog: sb_wdog: release irq and reboot notifier in error path and module_exit()
irq and reboot notifier are acquired in module_init() but never released.
They should be released correctly, otherwise reloading the module or error
during module_init() will cause a problem.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andrew Sharp <andy.sharp@lsi.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15 18:43:47 +00:00
dann frazier
86ded1f35d watchdog: hpwdt (12/12): Make NMI decoding a compile-time option
hpwdt is quite functional without the NMI decoding feature.
This change lets users disable the NMI portion at compile-time
via the new HPWDT_NMI_DECODING config option.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:53 +00:00
dann frazier
2ec7ed67dc watchdog: hpwdt (11/12): move NMI-decoding init and exit to seperate functions
Move NMI-decoding initialisation and exit code to seperate functions so that
we can ifdef-out parts of it in the future.

Also, this is for a device, so let's use dev_info instead of printk.
    
Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:52 +00:00
dann frazier
34572b29dd watchdog: hpwdt (10/12): Use "decoding" instead of "sourcing"
The term "decoding" more clearly explains what hpwdt is doing. It isn't
just finding the source of the interrupt, but rather aids in decoding what
the interrupt means.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:50 +00:00
dann frazier
243066bad7 watchdog: hpwdt (9/12): hpwdt_pretimeout reorganization
Reorganize this function to remove excess indentation and highlight
the single return code. (No functional change).

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:48 +00:00
dann frazier
aae67f3602 watchdog: hpwdt (8/12): implement WDIOC_GETTIMELEFT
Let applications check the amount of time left before the watchdog will fire.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:46 +00:00
dann frazier
6f681c2eab watchdog: hpwdt (7/12): allow full range of timer values supported by hardware
The hpwdt timer is a 16 bit value with 128ms resolution.
Let applications use this entire range.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:42 +00:00
dann frazier
e802e32d2b watchdog: hpwdt (6/12): Introduce SECS_TO_TICKS() macro
Define a macro to convert from seconds to timer ticks.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:39 +00:00
dann frazier
6b7f3d5321 watchdog: hpwdt (5/12): Make x86 assembly ifdef guard more strict
The 32-bit assembly is guarded by an #ifndef CONFIG_X86_64. Kconfig prevents
us from building this driver on !X86, so that happens to suffice - but we
should really lock it down to #ifdef CONFIG_X86_32.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:37 +00:00
dann frazier
36e3ff44ce watchdog: hpwdt (4/12): Despecificate driver from iLO2
This driver supports both iLO2 and iLO3, but our user-visible strings
currently only reference iLO2. Let's just call it "iLO2+" to avoid having
to update strings for each iLO generation. This driver doesn't support
iLO ASICs prior to iLO2, but that is sufficiently explained in Kconfig.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:35 +00:00
dann frazier
923410d0bf watchdog: hpwdt (3/12): Group NMI sourcing specific items together
* Group together includes specific to NMI sourcing
* Group defines only used by NMI sourcing together
* Group declarations specific to NMI sourcing together

This gives a clean seperation of watchdog specific items and
NMI sourcing specific items (which is needed for making it
possible to build hpwdt without the NMI functionality).

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:31 +00:00
dann frazier
550d299eeb watchdog: hpwdt (2/12): Group options that affect watchdog behavior together
Reorganization only.

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:27 +00:00
dann frazier
a52e6d181d watchdog: hpwdt (1/12): clean-up include-files.
* remove unnecessary includes
* We use a spinlock, but lacked the include
* We need bitops.h for test_and_set_bit/clear_bit

Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13 20:54:24 +00:00
Linus Torvalds
58d4ea65b9 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mmc_spi: Fix unterminated of_match_table
  of/sparc: fix build regression from of_device changes
  of/device: Replace struct of_device with struct platform_device
2010-08-12 09:11:31 -07:00
Kulikov Vasiliy
adb23631a7 watchdog: hpwdt: formatting of pointers in printk()
Use %p instead of %08x in printk().

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08 18:22:44 +00:00
Viresh KUMAR
4a370278e1 watchdog: Adding support for ARM Primecell SP805 Watchdog
Technical Reference Manual can be found at:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08 18:22:25 +00:00
Giel van Schijndel
96cb4eb019 watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG
Add a new watchdog driver for the Fintek F71808E and F71882FG Super I/O
controllers.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08 18:21:42 +00:00
Wim Van Sebroeck
4c4b638e37 watchdog: sch311x_wdt.c: set parent before registeriing the misc device in probe() function
Set the paranet of the misc_device before we register the misc_device.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
2010-08-08 18:21:15 +00:00
H Hartley Sweeten
9f2cc6f759 watchdog: wdt_pci.c: move ids to pci_ids.h
Move the VENDOR/DEVICE ids to pci_ids.h.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08 18:20:38 +00:00
Wim Van Sebroeck
9a37256313 watchdog: s3c2410_wdt - Fix removing of platform device
When removing the watchdog platform device, we need to
disable the access to userspace first. It makes no sense
to remove the drivers clock, irq's, ... and then disable
userspace access.
the order of removal has also been changed so that it
is the reverse of probing (this way the clock is also
disabled sooner).

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08 18:20:09 +00:00
Grant Likely
2dc1158137 of/device: Replace struct of_device with struct platform_device
of_device is just an alias for platform_device, so remove it entirely.  Also
replace to_of_device() with to_platform_device() and update comment blocks.

This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.

@@
@@
-struct of_device
+struct platform_device

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-06 09:25:50 -06:00
Linus Torvalds
03c0c29aff Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.
2010-08-05 15:57:35 -07:00
David Daney
4c076fb41a WATCHDOG: Add watchdog driver for OCTEON SOCs
The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit.

The driver is split into two source files one for the C code and one
for assembly.  Assembly is needed to handle the NMI and then print the
machine state before the reboot is triggered.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org,
Patchwork: https://patchwork.linux-mips.org/patch/1503/
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 drivers/watchdog/octeon-wdt-main.c
 create mode 100644 drivers/watchdog/octeon-wdt-nmi.S
2010-08-05 13:26:22 +01:00
Grant Likely
1ab1d63a85 of/platform: remove all of_bus_type and of_platform_bus_type references
Both of_bus_type and of_platform_bus_type are just #define aliases
for the platform bus.  This patch removes all references to them and
switches to the of_register_platform_driver()/of_unregister_platform_driver()
API for registering.

Subsequent patches will convert each user of of_register_platform_driver()
into plain platform_drivers without the of_platform_driver shim.  At which
point the of_register_platform_driver()/of_unregister_platform_driver()
functions can be removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:52 -06:00
Grant Likely
4e4f62bf73 Merge commit 'v2.6.35-rc6' into devicetree/next
Conflicts:
	arch/sparc/kernel/prom_64.c
2010-07-24 09:49:13 -06:00
Grant Likely
1636f8ac2b sparc/of: Move of_device fields into struct pdev_archdata
This patch moves SPARC architecture specific data members out of
struct of_device and into the pdev_archdata structure.  The reason
for this change is to unify the struct of_device definition amongst
all the architectures.  It also remvoes the .sysdata, .slot, .portid
and .clock_freq properties because they aren't actually used by
anything.

A subsequent patch will replace struct of_device entirely with struct
platform_device and the of_platform support code will share common
routines with the platform bus (but the bus instances themselves can
remain separate).

This patch also adds 'struct resources *resource' and num_resources
to match the fields defined in struct platform_device.  After this
change, 'struct platform_device' can be used as a drop-in replacement
for 'struct of_platform'.

This change is in preparation for merging the of_platform_bus_type
with the platform_bus_type.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-28 12:41:33 -07:00
Hans-Christian Egtvedt
f1f5bda4e9 watchdog: at32ap700x_wdt: register misc device last in probe() function
This patch reworks the probe() function in the at32ap700x_wdt driver, this to
make sure the miscdev is properly initialized and the driver is ready to be
accessed.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
2010-06-17 09:56:57 +00:00
Baruch Siach
8acf7d00df watchdog: [PATCH 3/3] imx2_wdt: fix section mismatch
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-06-13 08:20:06 +00:00
Julia Lawall
cfca31ce78 [PATCH 2/11] drivers/watchdog: Eliminate a NULL pointer dereference
At the point of the call to dev_err, wm8350 is NULL.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-06-07 15:55:03 +00:00
Anatolij Gustschin
b74dbf2aed of/watchdog: gef_wdt.c: fix build breakage
Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02 21:02:41 -06:00
Michael Guntsche
de2b606c24 watchdog: Fix build failure with OF changes
commit 61c7a080a5 ( of: Always use
'struct device.of_node' to get device node pointer.) missed
drivers/watchdog/mpc8xxx_wdt.c. This patch fixes it

Signed-off-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02 13:45:05 -06:00
Florian Fainelli
8deca39e5c mfd: Change rdc321x resources flags to IORESOURCE_IO
The rdc321x southbridge PCI device has no MEM PCI resources that we could
pass to mfd_add_devices. Since 33254dd5, mfd_add_device checks for the
mem_base argument that we set to NULL. Changing the resources passed to
our MFD cells from IORESOURCE_MEM to IORESOURCE_IO fixes that. Since we use
those resources as offsets to the PCI configuration space base address of
the southbridge device this is also more adequate.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:52 +02:00
Florian Fainelli
842102f35a watchdog: Convert rdc321x_wdt to use southbridge pci device
The RDC321x MFD southbridge driver will pass a reference to the
southbridge PCI device which should be used by the watchdog driver for its
operations.  This patch converts the watchdog driver to use the pci_dev
pointer and make use of the base register resource which is passed along
with the platform device.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:29 +02:00
Wolfram Sang
bb2fd8a844 watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) processors.
This is the driver for the hardware watchdog on the Freescale IMX2 and later processors.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-25 12:43:46 +00:00
Banajit Goswami
100fb76f0a watchdog: s3c2410_wdt - Fix on handling of the request_mem_region fail
If the request for wdt_mem region fails, this patch modifies the driver
such that, it does not try to release the wdt_mem region on exit.

Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-25 09:06:21 +00:00
Banajit Goswami
8740f71d7f watchdog: s3c2410_wdt - Add extra option to include watchdog for Samsung SoCs
This patch adds HAVE_S3C2410_WATCHDOG to control inclusion of watchdog driver
for Samsung SoCs. This option will help to include the driver only for the
necessary machines and not for all for any given arch.

Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-25 09:06:15 +00:00
Pádraig Brady
7e6811daa6 iTCO_wdt: fix TCO V1 timeout values and limits
For TCO V1 devices the programmed timeout was twice too long
because the fact that the TCO V1 timer needs to count down
twice before triggering the watchdog, wasn't accounted for.
Also the timeout values in the module description and error
message were clarified. And the _STS registers are 16 bit
instead of 8 bit.

Signed-off-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Simon Kagstrom <simon.kagstrom@netinsight.se>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-25 09:05:56 +00:00
Ameya Palande
bb6f36070c watchdog: twl4030_wdt: Disable watchdog during probing
If we are not able to register then it is better to have
watchdog in disabled state than noticing a system reboot.

Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Acked-By: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-25 09:05:46 +00:00