Commit Graph

19084 Commits

Author SHA1 Message Date
Jeff Garzik
b1d917739a Merge branch 'upstream-fixes' 2006-01-29 02:47:18 -05:00
Jeff Garzik
bd12097c74 [libata ahci] Isolate Intel-ism, add JMicron JMB360 support
Isolate some PCI config register bitbanging to Intel hardware, as it
should have been all along.

Add support for JMicron JMB360.
2006-01-29 02:47:03 -05:00
Randy Dunlap
c893a3ae49 Various libata documentation updates.
This is a merger of libata docs + cleanups from
Martin Waitz <tali@admingilde.org> and me.

From: Randy Dunlap <rdunlap@xenotime.net>
From: Martin Waitz <tali@admingilde.org>

Fix libata kernel-doc comments to match code.
Add some function parameters to kernel-doc.
Fix some typos/spellos.
Put comments in <= 80 columns.
Make one DPRINTK string unique.
Fix sparse cast warnings.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-28 13:15:32 -05:00
Luke Kosewski
6340f01969 [libata sata_promise] add correct read/write of hotplug registers for SATAII devices
This patch adds support for correctly masking out and knowing about
hotplug events on Promise SATAII150 Tx4/Tx2 Plus controllers.

Also, a kmalloc->kzalloc cleanup.

Signed-off-by: Luke Kosewski <lkosewsk@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-28 12:39:29 -05:00
Jeff Garzik
b376bc1f6b [libata ata_piix] Fix ICH6/7 map value interpretation
The previous change failed to properly mask out unrelated bits, which
resulted in a failure to detect devices.
2006-01-28 12:26:23 -05:00
Tejun Heo
c2bd58047b [PATCH] libata: implement standard reset component operations and ->probe_reset
Implement SRST, COMRESET and standard postreset component operations
for ata_drive_probe_reset(), and use these three functions to
implement ata_std_probe_reset.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27 20:58:34 -05:00
Tejun Heo
a62c0fc526 [PATCH] libata: implement ata_drive_probe_reset()
Most low level drivers share supported reset/classify actions and
sequence.  This patch implements ata_drive_probe_reset() which helps
constructing ->probe_reset from three component operations -
softreset, hardreset and postreset.  This minimizes duplicate code and
yet allows flexibility if needed. The three component operations can
also be shared by EH later.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27 20:58:34 -05:00
Tejun Heo
c19ba8af4f [PATCH] libata: new ->probe_reset operation
Add new ->probe_reset operation to ata_port_operations obsoleting
->phy_reset.  The main difference from ->phy_reset is that the new
operation is not allowed to manipulate libata internals directly.
It's not allowed to configure or disable the port or devices.  It can
only succeed or fail and classify attached devices into passed
@classes.

This change gives more control to higher level and eases sharing reset
methods with EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 23:20:14 -05:00
Tejun Heo
b4dc7623c1 [PATCH] libata: modify ata_dev_try_classify
Make ata_dev_try_classify take @r_err to store tf error register value
on completion and return device class instead of directly manipulating
dev->class.  This is preparation for new reset mechanism.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 23:20:14 -05:00
Tejun Heo
6f8b995895 [PATCH] libata: export ata_busy_sleep
Export ata_busy_sleep(), to be used by low level driver reset functions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 23:18:47 -05:00
Tejun Heo
22b49985f5 [PATCH] ahci: add constants for SRST
Add constants needed to perform SRST.  This is preparation for adding
softreset method.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 23:08:52 -05:00
Tejun Heo
e0bfd14997 [PATCH] ahci: stop engine during hard reset
AHCI spec mandates engine to be stopped during hard resets.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 23:07:08 -05:00
Tejun Heo
9506437921 [PATCH] libata: create pio/atapi task queueing wrappers
Wrap pio/atapi task queueing in correspondingly named functions.  This
change doesn't change anything.  It's preparation for follow-up
pio-task/eh sync patch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 23:01:29 -05:00
Tejun Heo
a72ec4ce6d [PATCH] libata: implement and apply ata_eh_qc_complete/retry()
Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and
scsi_eh_flush_done_q().  This removes all eh scsicmd finish hacks from
low level drivers.

This change was first suggested by Jeff Garzik.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:36:28 -05:00
Tejun Heo
041c5fc33c [PATCH] SCSI: export scsi_eh_finish_cmd() and scsi_eh_flush_done_q()
Export two SCSI EH command handling functions.  To be used by libata EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:36:28 -05:00
Tejun Heo
9a3d9eb017 [PATCH] libata: return AC_ERR_* from issue functions
Return AC_ERR_* mask from issue fuctions instead of 0/-1.  This
enables things like failing a qc with AC_ERR_HSM when the device
doesn't set DRDY when the qc is about to be issued.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:36:27 -05:00
Tejun Heo
11a56d2439 [PATCH] libata: add detailed AC_ERR_* flags
Add detailed AC_ERR_* flags and use them.  Long-term goal is to
describe all errors with err_mask and tf combination (tf for failed
sector information, etc...).  After proper error diagnosis is
implemented, sense data should also be generated from err_mask instead
of directly from hardware tf registers as it is currently.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:36:27 -05:00
Tejun Heo
284b6481cc [PATCH] ahci: fix err_mask setting in ahci_host_intr
In ahci_host_intr err_mask is determined from IRQ status but never
used.  This patch sets qc->err_mask to the determined err_mask.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:36:27 -05:00
Tejun Heo
8e436af932 [PATCH] libata: fix ata_qc_issue() error handling
When ata_qc_issue() fails, the qc might have been dma mapped or not.
So, performing only ata_qc_free() results in dma map leak.  This patch
makes ata_qc_issue() mark dma map flags correctly on failure and calls
ata_qc_complete() after ata_qc_issue() fails.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:33:50 -05:00
Tejun Heo
77853bf2b4 [PATCH] libata: make the owner of a qc responsible for freeing it
qc used to be freed automatically on command completion.  However, as
a qc can carry information about its completion status, it can be
useful to its owner/issuer after command completion.  This patch makes
freeing qc responsibility of its owner.  This simplifies
ata_exec_internal() and makes command turn-around for atapi request
sensing less hackish.

This change was originally suggested by Jeff Garzik.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:33:49 -05:00
Tejun Heo
4ba946e9d8 [PATCH] libata: fold __ata_qc_complete() into ata_qc_free()
All ata_qc_free() does is calling __ata_qc_complete() which isn't used
anywhere else.  Fold __ata_qc_complete() into ata_qc_free().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:33:49 -05:00
Jeff Garzik
71e834f563 Merge branch 'master' 2006-01-26 22:33:43 -05:00
Tejun Heo
ff0fc1467f [PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7
Unlike their older siblings, ICH6 and 7 use different scheme for MAP
VALUE.  This patch makes ata_piix interpret MV properly on ICH6/7.

Pre-ICH6/7

 The value of these bits indicate the address range the SATA port
 responds to, and whether or not the SATA and IDE functions are
 combined.

 000 = Non-combined. P0 is primary master. P1 is secondary master.
 001 = Non-combined. P0 is secondary master. P1 is primary master.
 100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is
       2:0 Map Value secondary.
 101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is
       secondary.
 110 = Combined. P-ATA is primary. P0 is secondary master. P1 is
       secondary slave.
 111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is
       secondary master.

ICH6/7

 Map Value - R/W. Map Value (MV): The value in the bits below indicate
the address range the SATA ports responds to, and whether or not the
PATA and SATA functions are combined. When in combined mode, the AHCI
memory space is not available and AHCI may not be used.

 00 = Non-combined. P0 is primary master, P2 is the primary slave. P1
      is secondary master, P3 is the 1:0 secondary slave (desktop
      only). P0 is primary master, P2 is the primary slave (mobile
      only).
 01 = Combined. IDE is primary. P1 is secondary master, P3 is the
      secondary slave. (desktop only)
 10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary
 11 = Reserved

Signed-off-by: Tejun Heo <htejun@gmail.com>

--

Jeff, without this patch, ata_piix misdetects my ICH7's combined mode,
ending up not applying bridge limits to PX-710SA and configuring IDE
drive on 40-c cable to UDMA/66.

Thanks.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 21:56:07 -05:00
David S. Miller
3ee68c4af3 [SPARC64]: Use compat_sys_futimesat in 32-bit syscall table.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-20 01:49:15 -08:00
Linus Torvalds
18a4144028 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2006-01-19 22:19:26 -08:00
Linus Torvalds
02829f7377 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2006-01-19 22:17:38 -08:00
Linus Torvalds
497992917e Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 2006-01-19 22:16:58 -08:00
David S. Miller
7e732bfc55 [PATCH] Fix regression added by ppoll/pselect code.
The compat layer timeout handling changes in:

9f72949f67

are busted.  This is most easily seen with an X application
that uses sub-second select/poll timeout such as emacs.  You
hit a key and it takes a second or so before the app responds.

The two ROUND_UP() calls upon entry are using {tv,ts}_sec where it
should instead be using {tv_usec,ts_nsec}, which perfectly explains
the observed incorrect behavior.

Another bug shot down with git bisect.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 22:11:31 -08:00
David S. Miller
4f2d7680cb [NETFILTER] x_tables: Make XT_ALIGN align as strictly as necessary.
Or else we break on ppc32 and other 32-bit platforms.

Based upon a patch from Harald Welte.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 16:58:37 -08:00
David S. Miller
cf9e50a920 Merge master.kernel.org:/pub/scm/linux/kernel/git/sridhar/lksctp-2.6 2006-01-19 16:53:02 -08:00
John Hawkes
386d1d50c8 [IA64] eliminate softlockup warning
Fix an unnecessary softlockup watchdog warning in the ia64
uncached_build_memmap() that occurs occasionally at 256p and always at
512p.  The problem occurs at boot time.

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-19 11:18:25 -08:00
Jes Sorensen
60f1c4443c [IA64] sem2mutex: arch/ia64/kernel/perfmon.c
Migrate perfmon from using an old semaphore to a completion handler.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-19 11:17:56 -08:00
Jes Sorensen
92ff2ecd0d [IA64] sem2mutex: arch/ia64/ia32/sys_ia32.c
Migrate arch/ia64/ia32/sys_ia32 to using a mutex for mmap protection.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-19 11:17:33 -08:00
David S. Miller
2d7d5f0511 [SPARC]: Add support for *at(), ppoll, and pselect syscalls.
This also includes by necessity _TIF_RESTORE_SIGMASK support,
which actually resulted in a lot of cleanups.

The sparc signal handling code is quite a mess and I should
clean it up some day.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 02:42:49 -08:00
David S. Miller
f7111ceb52 [SPARC]: sparc32 needs PROMDEV_{I,O}RSC defines too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18 21:57:37 -08:00
Linus Torvalds
0f36b018b2 Merge master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6 2006-01-18 19:37:57 -08:00
mark gross
648bf4fb21 [PATCH] tlclk driver update
some driver clean ups, and a re-posting of changes that are needed

to match the updated TPS.

Signed-off-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:25:49 -08:00
Alan Cox
da9bb1d27b [PATCH] EDAC: core EDAC support code
This is a subset of the bluesmoke project core code, stripped of the NMI work
which isn't ready to merge and some of the "interesting" proc functionality
that needs reworking or just has no place in kernel.  It requires no core
kernel changes except the added scrub functions already posted.

The goal is to merge further functionality only after the core code is
accepted and proven in the base kernel, and only at the point the upstream
extras are really ready to merge.

From: doug thompson <norsk5@xmission.com>

  This converts EDAC to sysfs and is the final chunk neccessary before EDAC
  has a stable user space API and can be considered for submission into the
  base kernel.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: doug thompson <norsk5@xmission.com>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:31 -08:00
Alan Cox
2f768af73f [PATCH] EDAC: drivers for Radisys 82600
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:31 -08:00
Alan Cox
0d88a10e56 [PATCH] EDAC: drivers for Intel i82860, i82875
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:31 -08:00
Alan Cox
806c35f505 [PATCH] EDAC: drivers for AMD 76x and Intel E750x, E752x
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:31 -08:00
Alan Cox
715b49ef2d [PATCH] EDAC: atomic scrub operations
EDAC requires a way to scrub memory if an ECC error is found and the chipset
does not do the work automatically.  That means rewriting memory locations
atomically with respect to all CPUs _and_ bus masters.  That means we can't
use atomic_add(foo, 0) as it gets optimised for non-SMP

This adds a function to include/asm-foo/atomic.h for the platforms currently
supported which implements a scrub of a mapped block.

It also adjusts a few other files include order where atomic.h is included
before types.h as this now causes an error as atomic_scrub uses u32.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
David Woodhouse
3213e913b0 [PATCH] Add pselect/ppoll system calls on i386
Add the sys_pselect6() and sys_poll() calls to the i386 syscall table.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
David Woodhouse
9f72949f67 [PATCH] Add pselect/ppoll system call implementation
The following implementation of ppoll() and pselect() system calls
depends on the architecture providing a TIF_RESTORE_SIGMASK flag in the
thread_info.

These system calls have to change the signal mask during their
operation, and signal handlers must be invoked using the new, temporary
signal mask. The old signal mask must be restored either upon successful
exit from the system call, or upon returning from the invoked signal
handler if the system call is interrupted. We can't simply restore the
original signal mask and return to userspace, since the restored signal
mask may actually block the signal which interrupted the system call.

The TIF_RESTORE_SIGMASK flag deals with this by causing the syscall exit
path to trap into do_signal() just as TIF_SIGPENDING does, and by
causing do_signal() to use the saved signal mask instead of the current
signal mask when setting up the stack frame for the signal handler -- or
by causing do_signal() to simply restore the saved signal mask in the
case where there is no handler to be invoked.

The first patch implements the sys_pselect() and sys_ppoll() system
calls, which are present only if TIF_RESTORE_SIGMASK is defined. That
#ifdef should go away in time when all architectures have implemented
it. The second patch implements TIF_RESTORE_SIGMASK for the PowerPC
kernel (in the -mm tree), and the third patch then removes the
arch-specific implementations of sys_rt_sigsuspend() and replaces them
with generic versions using the same trick.

The fourth and fifth patches, provided by David Howells, implement
TIF_RESTORE_SIGMASK for FR-V and i386 respectively, and the sixth patch
adds the syscalls to the i386 syscall table.

This patch:

Add the pselect() and ppoll() system calls, providing core routines usable by
the original select() and poll() system calls and also the new calls (with
their semantics w.r.t timeouts).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
Jeff Dike
36a7878a22 [PATCH] uml: use generic sys_rt_sigsuspend
Use the generic sys_rt_sigsuspend.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
Jeff Dike
2fc10620e7 [PATCH] uml: add TIF_RESTORE_SIGMASK support
Add support for TIF_RESTORE_SIGMASK.  I copy the i386 handling of the flag.
sys_sigsuspend is also changed to follow i386.
Also a bit of cleanup -
   turn an if into a switch
   get rid of a couple more emacs formatting comments

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
David Woodhouse
f27201da5c [PATCH] TIF_RESTORE_SIGMASK support for arch/powerpc
Implement the TIF_RESTORE_SIGMASK flag in the new arch/powerpc kernel, for
both 32-bit and 64-bit system call paths.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
David Howells
283828f3c1 [PATCH] Handle TIF_RESTORE_SIGMASK for i386
Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled:

        [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc
        [PATCH] 3/3 Generic sys_rt_sigsuspend

It does the following:

 (1) Declares TIF_RESTORE_SIGMASK for i386.

 (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set.

 (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved
     in current->saved_sigmask.

 (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead.

 (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK
     rather than attempting to fudge the return registers.

 (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping
     intrinsically.

 (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or
     -EFAULT rather than true/false to be consistent with the rest of the
     kernel.

Due to the fact do_signal() is then only called from one place:

 (8) Makes do_signal() no longer have a return value is it was just being
     ignored; force_sig() takes care of this.

 (9) Discards the old sigmask argument to do_signal() as it's no longer
     necessary.

(10) Makes do_signal() static.

(11) Marks the second argument to do_notify_resume() as unused. The unused
     argument should remain in the middle as the arguments are passed in as
     registers, and the ordering is specific in entry.S

Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(),
they no longer need access to the exception frame, and so can just take
arguments normally.

This patch depends on sys_rt_sigsuspend patch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:29 -08:00
David Howells
a411aee96e [PATCH] Handle TIF_RESTORE_SIGMASK for FRV
Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled:

        [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc
        [PATCH] 3/3 Generic sys_rt_sigsuspend

It does the following:

 (1) Declares TIF_RESTORE_SIGMASK for FRV.

 (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set.

 (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved
     in current->saved_sigmask.

 (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead.

 (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK
     rather than attempting to fudge the return registers.

 (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping
     intrinsically.

 (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or
     -EFAULT rather than true/false to be consistent with the rest of the
      kernel.

Due to the fact do_signal() is then only called from one place:

 (8) Make do_signal() no longer have a return value is it was just being
     ignored; force_sig() takes care of this.

 (9) Discards the old sigmask argument to do_signal() as it's no longer
     necessary.

This patch depends on the FRV signalling patches as well as the
sys_rt_sigsuspend patch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:29 -08:00
David Woodhouse
150256d8aa [PATCH] Generic sys_rt_sigsuspend()
The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of
sys_rt_sigsuspend() instead of duplicating it for each architecture.  This
provides such an implementation and makes arch/powerpc use it.

It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:29 -08:00