Commit Graph

520 Commits

Author SHA1 Message Date
NeilBrown
4f2e639af4 [PATCH] md: endian annotations for the bitmap superblock
And a couple of bug fixes found by sparse.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:05 -07:00
NeilBrown
1c05b4bc22 [PATCH] md: endian annotation for v1 superblock access
Includes a couple of bugfixes found by sparse.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:05 -07:00
NeilBrown
2e333e8986 [PATCH] md: fix calculation of ->degraded for multipath and raid10
Two less-used md personalities have bugs in the calculation of ->degraded (the
extent to which the array is degraded).

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:05 -07:00
Andrew Morton
3fcfab16c5 [PATCH] separate bdi congestion functions from queue congestion functions
Separate out the concept of "queue congestion" from "backing-dev congestion".
Congestion is a backing-dev concept, not a queue concept.

The blk_* congestion functions are retained, as wrappers around the core
backing-dev congestion functions.

This proper layering is needed so that NFS can cleanly use the congestion
functions, and so that CONFIG_BLOCK=n actually links.

Cc: "Thomas Maier" <balagi@justmail.de>
Cc: "Jens Axboe" <jens.axboe@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Howells <dhowells@redhat.com>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:35 -07:00
Akinobu Mita
e24650c2e7 [PATCH] md: fix /proc/mdstat refcounting
I have seen mdadm oops after successfully unloading md module.

This patch privents from unloading md module while
mdadm is polling /proc/mdstat.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 08:18:43 -07:00
Alexey Dobriyan
5f6e3c8365 [PATCH] md: use BUILD_BUG_ON
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:26 -07:00
NeilBrown
5842730de1 [PATCH] md: fix bug where new drives added to an md array sometimes don't sync properly
This fixes a bug introduced in 2.6.18.

If a drive is added to a raid1 using older tools (mdadm-1.x or raidtools)
then it will be included in the array without any resync happening.

It has been submitted for 2.6.18.1.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:41 -07:00
Eric Sesterhenn
52e5f9d1cf BUG_ON cleanup for drivers/md/
This changes two if() BUG(); usages to BUG_ON(); so people
can disable it safely.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:33:23 +02:00
NeilBrown
3a0f5bbb1a [PATCH] md: add error reporting to superblock write failure
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:19 -07:00
Paul Clements
a638b2dc95 [PATCH] md: use ffz instead of find_first_set to convert multiplier to shift
find_first_set doesn't find the least-significant bit on bigendian machines,
so it is really wrong to use it.

ffs is closer, but takes an 'int' and we have a 'unsigned long'.  So use
ffz(~X) to convert a chunksize into a chunkshift.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
14f50b49fd [PATCH] md: remove 'experimental' classification from raid5 reshape
I have had enough success reports not to believe that this is safe for 2.6.19.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
e8703fe1f5 [PATCH] md: remove MAX_MD_DEVS which is an arbitrary limit
Once upon a time we needed to fixed limit to the number of md devices,
probably because we preallocated some array.  This need no longer exists, but
we still have an arbitrary limit.

So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor'
part of a device number.

Also remove some useless noise at init time (which reports MAX_MD_DEVS) and
remove MD_THREAD_NAME_MAX which hasn't been used for a while.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
61df9d91e9 [PATCH] md: make messages about resync/recovery etc more specific
It is possible to request a 'check' of an md/raid array where the whole array
is read and consistancies are reported.

This uses the same mechanisms as 'resync' and so reports in the kernel logs
that a resync is being started.  This understandably confuses/worries people.

Also the text in /proc/mdstat suggests a 'resync' is happen when it is just a
check.

This patch changes those messages to be more specific about what is happening.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
f022b2fddd [PATCH] md: add a ->congested_fn function for raid5/6
This is very different from other raid levels and all requests go through a
'stripe cache', and it has congestion management already.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
0d12922823 [PATCH] md: define ->congested_fn for raid1, raid10, and multipath
raid1, raid10 and multipath don't report their 'congested' status through
bdi_*_congested, but should.

This patch adds the appropriate functions which just check the 'congested'
status of all active members (with appropriate locking).

raid1 read_balance should be modified to prefer devices where
bdi_read_congested returns false.  Then we could use the '&' branch rather
than the '|' branch.  However that should would need some benchmarking first
to make sure it is actually a good idea.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
26be34dc3a [PATCH] md: define backing_dev_info.congested_fn for raid0 and linear
Each backing_dev needs to be able to report whether it is congested, either by
modulating BDI_*_congested in ->state, or by defining a ->congested_fn.
md/raid did neither of these.  This patch add a congested_fn which simply
checks all component devices to see if they are congested.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
c04be0aa82 [PATCH] md: Improve locking around error handling
The error handling routines don't use proper locking, and so two concurrent
errors could trigger a problem.

So:
  - use test-and-set and test-and-clear to synchonise
    the In_sync bits with the ->degraded count
  - use the spinlock to protect updates to the
    degraded count (could use an atomic_t but that
    would be a bigger change in code, and isn't
    really justified)
  - remove un-necessary locking in raid5

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
11ce99e625 [PATCH] md: Remove working_disks from raid1 state data
It is equivalent to conf->raid_disks - conf->mddev->degraded.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
NeilBrown
867868fb55 [PATCH] md: Factor out part of raid1d into a separate function
raid1d has toooo many nested block, so take the fix_read_error functionality
out into a separate function.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
Coywolf Qi Hunt
2d2063ceae [PATCH] md: remove unnecessary variable x in stripe_to_pdidx()
Signed-off-by: Coywolf Qi Hunt <qiyong@freeforge.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
Paul Clements
9b1d1dac18 [PATCH] md: new sysfs interface for setting bits in the write-intent-bitmap
Add a new sysfs interface that allows the bitmap of an array to be dirtied.
The interface is write-only, and is used as follows:

echo "1000" > /sys/block/md2/md/bitmap

(dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk
bitmaps of array md2)

echo "1000-2000" > /sys/block/md1/md/bitmap

(dirty the bits for chunks 1000-2000 in md1's bitmap)

This is useful, for example, in cluster environments where you may need to
combine two disjoint bitmaps into one (following a server failure, after a
secondary server has taken over the array).  By combining the bitmaps on
the two servers, a full resync can be avoided (This was discussed on the
list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
NeilBrown
76186dd8b7 [PATCH] md: remove 'working_disks' from raid10 state
It isn't needed as mddev->degraded contains equivalent info.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
NeilBrown
02c2de8cc8 [PATCH] md: remove the working_disks and failed_disks from raid5 state data.
They are not needed.  conf->failed_disks is the same as mddev->degraded and
conf->working_disks is conf->raid_disks - mddev->degraded.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
NeilBrown
850b2b420c [PATCH] md: replace magic numbers in sb_dirty with well defined bit flags
Instead of magic numbers (0,1,2,3) in sb_dirty, we have
some flags instead:
MD_CHANGE_DEVS
   Some device state has changed requiring superblock update
   on all devices.
MD_CHANGE_CLEAN
   The array has transitions from 'clean' to 'dirty' or back,
   requiring a superblock update on active devices, but possibly
   not on spares
MD_CHANGE_PENDING
   A superblock update is underway.

We wait for an update to complete by waiting for all flags to be clear.  A
flag can be set at any time, even during an update, without risk that the
change will be lost.

Stop exporting md_update_sb - isn't needed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
NeilBrown
6814d5368d [PATCH] md: factor out part of raid10d into a separate function.
raid10d has toooo many nested block, so take the fix_read_error functionality
out into a separate function.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
Adrian Bunk
fbedac04fa [PATCH] md: the scheduled removal of the START_ARRAY ioctl for md
This patch contains the scheduled removal of the START_ARRAY ioctl for md.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
Bryn Reeves
999d816851 [PATCH] dm table: add target flush
This patch adds support for a per-target dm_flush_fn method.  This is needed
to allow dm-loop to invalidate page cache mappings in response to BLKFLSBUF
ioctl commands.

Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
Bryn Reeves
3cb4021453 [PATCH] dm: extract device limit setting
Separate the setting of device I/O limits from dm_get_device().  dm-loop will
use this.

Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
Stefan Bader
9faf400f7e [PATCH] dm: use private biosets
I found a problem within device-mapper that occurs in low-mem situations.  It
was found using a mirror target but I think in theory it would hit any setup
that stacks device-mapper devices (like LVM on top of multipath).

Since device-mapper core uses the common fs_bioset in clone_bio(), and a
private, but still global, bio_set in split_bvec() it is possible that the
filesystem and the first level target successfully get bios but the lower
level target doesn't because there is no more memory and the pool was drained
by upper layers.  So the remapping will be stuck forever.  To solve this
device-mapper core needs to use a private bio_set for each device.

Signed-off-by: Stefan Bader <Stefan.Bader@de.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
Milan Broz
6a24c71843 [PATCH] dm crypt: use private biosets
In the low memory situation dm-crypt needs to use a private mempool of bios to
avoid blocking.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
Milan Broz
23541d2d28 [PATCH] dm crypt: move io to workqueue
This patch is designed to help dm-crypt comply with the
new constraints imposed by the following patch in -mm:
  md-dm-reduce-stack-usage-with-stacked-block-devices.patch

Under low memory the existing implementation relies upon waiting for I/O
submitted recursively to generic_make_request() completing before the original
generic_make_request() call can return.

This patch moves the I/O submission to a workqueue so the original
generic_make_request() can return immediately.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
Milan Broz
93e605c237 [PATCH] dm crypt: restructure write processing
Restructure the dm-crypt write processing in preparation for workqueue changes
in the next patches.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Milan Broz
8b00445716 [PATCH] dm crypt: restructure for workqueue change
Restructure part of the dm-crypt code in preparation for workqueue changes.

Use 'base_bio' or 'clone' variable names consistently throughout.  No
functional changes are included in this patch.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Milan Broz
e48d4bbf96 [PATCH] dm crypt: add key msg
Add the facility to wipe the encryption key from memory (for example while a
laptop is suspended) and reinstate it later (when the laptop gets resumed).

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Milan Broz
8757b7764f [PATCH] dm table: add target preresume
This patch adds a target preresume hook.

It is called before the targets are resumed and if it returns an error the
resume gets cancelled.

The crypt target will use this to indicate that it is unable to process I/O
because no encryption key has been supplied.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Bryn Reeves
cc1092019c [PATCH] dm: add debug macro
Add CONFIG_DM_DEBUG and DMDEBUG() macro.

Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Hannes Reinecke
8560ed6fa8 [PATCH] dm: add uevent change event on resume
Device-mapper devices are not accessible until a 'resume' ioctl has been
issued.  For userspace to find out when this happens we need to generate an
uevent for udev to take appropriate action.

As discussed at OLS we should send 'change' events for 'resume'.  We can think
of no useful purpose served by also having 'suspend' events.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Micha³ Miros³aw
e69fae561f [PATCH] dm mpath: use kzalloc
Use kzalloc() instead of kmalloc() + memset().

Signed-off-by: Micha³ Miros³aw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Micha³ Miros³aw
28f16c2039 [PATCH] dm mpath: tidy ctr
After initialising m->ti, there's no need to pass it in subsequent calls to
static functions used for parsing parameters.

Signed-off-by: Micha³ Miros³aw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Jonathan Brassow
e52b8f6dbe [PATCH] dm mirror: remove trailing space from table
Remove trailing space from 'dmsetup table' output.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Alasdair G Kergon
695368ac33 [PATCH] dm snapshot: fix freeing pending exception
If a snapshot became invalid while there are outstanding pending_exceptions,
when pending_complete() processes each one it forgets to remove the
corresponding exception from its exception table before freeing it.

Fix this by moving the 'out:' label up one statement so that
remove_exception() is always called.  Then __invalidate_exception() no longer
needs to call it and its 'pe' argument become superfluous.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:15 -07:00
Alasdair G Kergon
4b832e8de2 [PATCH] dm snapshot: tidy pe ref counting
Rename sibling_count to ref_count and introduce get and put functions.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Alasdair G Kergon
ca3a931fd3 [PATCH] dm snapshot: add workqueue
Add a workqueue so that I/O can be queued up to be flushed from a separate
thread (e.g.  if local interrupts are disabled).

A new per-snapshot spinlock pe_lock is introduced to protect queued_bios.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Alasdair G Kergon
9d493fa8c9 [PATCH] dm snapshot: tidy pending_complete
This patch rearranges the pending_complete() code so that the functional
changes in subsequent patches are clearer.

By consolidating the error and the non-error paths, we can move
error_snapshot_bios() and __flush_bios() in line.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Alasdair G Kergon
ba40a2aa6e [PATCH] dm snapshot: tidy snapshot_map
This patch rearranges the snapshot_map code so that the functional changes in
subsequent patches are clearer.

The only functional change is to replace the existing read lock with a write
lock which the next patch needs.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Mark McLoughlin
927ffe7c9a [PATCH] dm snapshot: fix metadata writing when suspending
When suspending a device-mapper device, dm_suspend() sleeps until all
necessary I/O is completed.  This state is triggered by a callback from
persistent_commit().  But some I/O can still be issued *after* the callback
(to prepare the next metadata area for use if the current one is full).  This
patch delays the callback until after that I/O is complete.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Mark McLoughlin
e4ff496db7 [PATCH] dm snapshot: make read and write exception functions void
read_exception() and write_exception() only return an error if supplied with
an out-of-range index.  If this ever happens it's the result of a bug in the
calling code so we handle this with an assertion and remove the error handling
in the callers.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Mark McLoughlin
f9cea4f707 [PATCH] dm snapshot: fix metadata error handling
Fix the error handling when store.read_metadata is called: the error should be
returned immediately.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Mark McLoughlin
4c7e3bf44d [PATCH] dm snapshot: allow zero chunk_size
The chunk size of snapshots cannot be changed so it is redundant to require it
as a parameter when activating an existing snapshot.  Allow a value of zero in
this case and ignore it.  For a new snapshot, use a default value if zero is
specified.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Milan Broz
92c060a692 [PATCH] dm snapshot: fix invalidation ENOMEM
Fix ENOMEM error sign.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Ishai Rabinovitz
e3f6ac6123 [PATCH] dm: fix alloc_dev error path
While reading the code I found a bug in the error path in alloc_dev in dm.c

When blk_alloc_queue fails there is no call to free_minor.

This patch fixes the problem.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:14 -07:00
Milan Broz
e90dae1f58 [PATCH] dm: support ioctls on mapped devices: fix with fake file
The new ioctl code passes the wrong file pointer to the underlying device.
No file pointer is available so make a temporary fake one.

ioctl_by_bdev() does set_fs(KERNEL_DS) so it's for ioctls originating
within the kernel and unsuitable here.  We are processing ioctls that
originated in userspace and mapping them to different devices.  Fixing the
existing callers that pass a NULL file struct and consolidating the
fake_file users are separate matters to solve in later patches.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:13 -07:00
Alasdair G Kergon
7006f6eca8 [PATCH] dm: export blkdev_driver_ioctl
Export blkdev_driver_ioctl for device-mapper.

If we get as far as the device-mapper ioctl handler, we know the ioctl is not
a standard block layer BLK* one, so we don't need to check for them a second
time and can call blkdev_driver_ioctl() directly.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:13 -07:00
Milan Broz
9af4aa30b7 [PATCH] dm mpath: support ioctls
When an ioctl is performed on a multipath device simply pass it on to the
underlying block device through current_path.  If current path is not yet
selected, select it.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:13 -07:00
Milan Broz
ab17ffa440 [PATCH] dm linear: support ioctls
When an ioctl is performed on a device with a linear target, simply pass it on
to the underlying block device.

Note that the ioctl will pass through the filtering in blkdev_ioctl() twice.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:13 -07:00
Milan Broz
aa129a2247 [PATCH] dm: support ioctls on mapped devices
Extend the core device-mapper infrastructure to accept arbitrary ioctls on a
mapped device provided that it has exactly one target and it is capable of
supporting ioctls.

[We can't use unlocked_ioctl because we need 'inode': 'file' might be NULL.
Is it worth changing this?]

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Arnd Bergmann <arnd@arndb.de> wrote:

> Am Wednesday 21 June 2006 21:31 schrieb Alasdair G Kergon:
> > static struct block_device_operations dm_blk_dops = {
> > .open = dm_blk_open,
> > .release = dm_blk_close,
> > +.ioctl = dm_blk_ioctl,
> > .getgeo = dm_blk_getgeo,
> > .owner = THIS_MODULE
>
> I guess this also needs a ->compat_ioctl method, otherwise it won't
> work for ioctl numbers that have a compat_ioctl implementation in the
> low-level device driver.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:13 -07:00
David Howells
9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Jens Axboe
4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Rik Snel
3c164bd815 [BLOCK] dm-crypt: trivial comment improvements
Just some minor comment nits.

- little-endian is better than low-endian
- and since it is called essiv everywere it should also be essiv
  in the comments (and not ess_iv)

Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:27 +10:00
Herbert Xu
3505868791 [CRYPTO] users: Use crypto_hash interface instead of crypto_digest
This patch converts all remaining crypto_digest users to use the new
crypto_hash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:21 +10:00
Herbert Xu
d1806f6a97 [BLOCK] dm-crypt: Use block ciphers where applicable
This patch converts dm-crypt to use the new block cipher type where
applicable.  It also changes simple cipher operations to use the new
encrypt_one/decrypt_one interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:13 +10:00
NeilBrown
ddac7c7e3a [PATCH] md: Fix issues with referencing rdev in md/raid1
We need to be careful when referencing mirrors[i].rdev.  It can disappear
under us at various times.

So:
  fix a couple of problem places.
  comment a couple of non-problem places
  move an 'atomic_add' which deferences rdev down a little
    way to some where where it is sure to not be NULL.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-01 11:39:08 -07:00
NeilBrown
6394cca548 [PATCH] md: fix recent breakage of md/raid1 array checking
A recent patch broke the ability to do a user-request check of a raid1.
This patch fixes the breakage and also moves a comment that was dislocated
by the same patch.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:31 -07:00
NeilBrown
8469219596 [PATCH] md: avoid backward event updates in md superblock when degraded.
If we
  - shut down a clean array,
  - restart with one (or more) drive(s) missing
  - make some changes
  - pause, so that they array gets marked 'clean',
the event count on the superblock of included drives
will be the same as that of the removed drives.
So adding the removed drive back in will cause it
to be included with no resync.

To avoid this, we only update the eventcount backwards when the array
is not degraded.  In this case there can (should) be no non-connected
drives that we can get confused with, and this is the particular case
where updating-backwards is valuable.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:31 -07:00
Daniel Kobras
c06aad854f [PATCH] dm: Fix deadlock under high i/o load in raid1 setup.
On an nForce4-equipped machine with two SATA disk in raid1 setup using dmraid,
we experienced frequent deadlock of the system under high i/o load.  'cat
/dev/zero > ~/zero' was the most reliable way to reproduce them: Randomly
after a few GB, 'cp' would be left in 'D' state along with kjournald and
kmirrord.  The functions cp and kjournald were blocked in did vary, but
kmirrord's wchan always pointed to 'mempool_alloc()'.  We've seen this pattern
on 2.6.15 and 2.6.17 kernels.  http://lkml.org/lkml/2005/4/20/142 indicates
that this problem has been around even before.

So much for the facts, here's my interpretation: mempool_alloc() first tries
to atomically allocate the requested memory, or falls back to hand out
preallocated chunks from the mempool.  If both fail, it puts the calling
process (kmirrord in this case) on a private waitqueue until somebody refills
the pool.  Where the only 'somebody' is kmirrord itself, so we have a
deadlock.

I worked around this problem by falling back to a (blocking) kmalloc when
before kmirrord would have ended up on the waitqueue.  This defeats part of
the benefits of using the mempool, but at least keeps the system running.  And
it could be done with a two-line change.  Note that mempool_alloc() clears the
GFP_NOIO flag internally, and only uses it to decide whether to wait or return
an error if immediate allocation fails, so the attached patch doesn't change
behaviour in the non-deadlocking case.  Path is against current git
(2.6.18-rc4), but should apply to earlier versions as well.  I've tested on
2.6.15, where this patch makes the difference between random lockup and a
stable system.

Signed-off-by: Daniel Kobras <kobras@linux.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:28 -07:00
Michal Miroslaw
485311a23c [PATCH] dm: BUG/OOPS fix
Fix BUG I tripped on while testing failover and multipathing.

BUG shows up on error path in multipath_ctr() when parse_priority_group()
fails after returning at least once without error.  The fix is to
initialize m->ti early - just after alloc()ing it.

BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c027c3d2
*pde = 00000000
Oops: 0000 [#3]
Modules linked in: qla2xxx ext3 jbd mbcache sg ide_cd cdrom floppy
CPU:    0
EIP:    0060:[<c027c3d2>]    Not tainted VLI
EFLAGS: 00010202   (2.6.17.3 #1)
EIP is at dm_put_device+0xf/0x3b
eax: 00000001   ebx: ee4fcac0   ecx: 00000000   edx: ee4fcac0
esi: ee4fc4e0   edi: ee4fc4e0   ebp: 00000000   esp: c5db3e78
ds: 007b   es: 007b   ss: 0068
Process multipathd (pid: 15912, threadinfo=c5db2000 task=ef485a90)
Stack: ec4eda40 c02816bd ee4fc4c0 00000000 f7e89498 f883e0bc c02816f6 f7e89480
       f7e8948c c0281801 ffffffea f7e89480 f883e080 c0281ffe 00000001 00000000
       00000004 dfe9cab8 f7a693c0 f883e080 f883e0c0 ca4b99c0 c027c6ee 01400000
Call Trace:
 <c02816bd> free_pgpaths+0x31/0x45  <c02816f6> free_priority_group+0x25/0x2e
 <c0281801> free_multipath+0x35/0x67  <c0281ffe> multipath_ctr+0x123/0x12d
 <c027c6ee> dm_table_add_target+0x11e/0x18b  <c027e5b4> populate_table+0x8a/0xaf
 <c027e62b> table_load+0x52/0xf9  <c027ec23> ctl_ioctl+0xca/0xfc
 <c027e5d9> table_load+0x0/0xf9  <c0152146> do_ioctl+0x3e/0x43
 <c0152360> vfs_ioctl+0x16c/0x178  <c01523b4> sys_ioctl+0x48/0x60
 <c01029b3> syscall_call+0x7/0xb
Code: 97 f0 00 00 00 89 c1 83 c9 01 80 e2 01 0f 44 c1 88 43 14 8b 04 24 59 5b 5e 5f 5d c3 53 89 c1 89 d3 ff 4a 08 0f 94 c0 84 c0 74 2a <8b> 01 8b 10 89 d8 e8 f6 fb ff ff 8b 03 8b 53 04 89 50 04 89 02
EIP: [<c027c3d2>] dm_put_device+0xf/0x3b SS:ESP 0068:c5db3e78

Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14 12:54:29 -07:00
NeilBrown
f9abd1ace4 [PATCH] md: Fix a bug that recently crept into md/linear
A recent patch that allowed linear arrays to be reconfigured on-line
allowed in a bug which results in divide by zero - not all
mddev->array_size were converted to conf->array_size.

This patch finished the conversion and fixed the bug.

The offending patch was commit 7c7546ccf6.

Thanks to Simon Kirby <sim@netnation.com> for the bug report.

Cc: Simon Kirby <sim@netnation.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:46 -07:00
Andrew Morton
d0a0a5ee7a [PATCH] md: fix oops in error-handling
During early MD setup (superblock reading), we don't have a personality yet.
But the error-handling code tries to dereference mddev->pers.  Fix.

Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
d695043259 [PATCH] md: include sector number in messages about corrected read errors
This is generally useful, but particularly helps see if it is the same sector
that always needs correcting, or different ones.

[akpm@osdl.org: fix printk warnings]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
67463acb64 [PATCH] md: require CAP_SYS_ADMIN for (re-)configuring md devices via sysfs
The ioctl requires CAP_SYS_ADMIN, so sysfs should too.  Note that we don't
require CAP_SYS_ADMIN for reading attributes even though the ioctl does.
There is no reason to limit the read access, and much of the information is
already available via /proc/mdstat

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
80ca3a44f5 [PATCH] md: unify usage of symbolic names for perms
Some places we use number (0660) someplaces names (S_IRUGO).  Change all
numbers to be names, and change 0655 to be what it should be.

Also make some formatting more consistent.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
5e3db645f8 [PATCH] md: fix usage of wrong variable in raid1
Though it rarely matters, we should be using 's' rather than r1_bio->sector
here.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
ae3c20ccf8 [PATCH] md: fix some small races in bitmap plugging in raid5
The comment gives more details, but I didn't quite have the sequencing write,
so there was room for races to leave bits unset in the on-disk bitmap for
short periods of time.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
7c785b7a18 [PATCH] md: fix a plug/unplug race in raid5
When a device is unplugged, requests are moved from one or two (depending on
whether a bitmap is in use) queues to the main request queue.

So whenever requests are put on either of those queues, we should make sure
the raid5 array is 'plugged'.  However we don't.  We currently plug the raid5
queue just before putting requests on queues, so there is room for a race.  If
something unplugs the queue at just the wrong time, requests will be left on
the queue and nothing will want to unplug them.  Normally something else will
plug and unplug the queue fairly soon, but there is a risk that nothing will.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
ff4e8d9a9f [PATCH] md: fix resync speed calculation for restarted resyncs
We introduced 'io_sectors' recently so we could count the sectors that causes
io during resync separate from sectors which didn't cause IO - there can be a
difference if a bitmap is being used to accelerate resync.

However when a speed is reported, we find the number of sectors processed
recently by subtracting an oldish io_sectors count from a current
'curr_resync' count.  This is wrong because curr_resync counts all sectors,
not just io sectors.

So, add a field to mddev to store the curren io_sectors separately from
curr_resync, and use that in the calculations.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
0b8c9de05c [PATCH] md: delay starting md threads until array is completely setup
When an array is started we start one or two threads (two if there is a
reshape or recovery that needs to be completed).

We currently start these *before* the array is completely set up and in
particular before queue->queuedata is set.  If the thread actually starts
very quickly on another CPU, we can end up dereferencing queue->queuedata
and oops.

This patch also makes sure we don't try to start a recovery if a reshape is
being restarted.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
31b65a0d38 [PATCH] md: set desc_nr correctly for version-1 superblocks
This has to be done in ->load_super, not ->validate_super

Without this, hot-adding devices to an array doesn't always
work right - though there is a work around in mdadm-2.5.2 to
make this less of an issue.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
f4370781d8 [PATCH] md: possible fix for unplug problem
I have reports of a problem with raid5 which turns out to be because the raid5
device gets stuck in a 'plugged' state.  This shouldn't be able to happen as
3msec after it gets plugged it should get unplugged.  However it happens
none-the-less.  This patch fixes the problem and is a reasonable thing to do,
though it might hurt performance slightly in some cases.

Until I can find the real problem, we should probably have this workaround in
place.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
Ingo Molnar
663d440eaa [PATCH] lockdep: annotate blkdev nesting
Teach special (recursive) locking code to the lock validator.

Effects on non-lockdep kernels:

- the introduction of the following function variants:

  extern struct block_device *open_partition_by_devnum(dev_t, unsigned);

  extern int blkdev_put_partition(struct block_device *);

  static int
  blkdev_get_whole(struct block_device *bdev, mode_t mode, unsigned flags);

 which on non-lockdep are the same as open_by_devnum(), blkdev_put()
 and blkdev_get().

- a subclass parameter to do_open(). [unused on non-lockdep]

- a subclass parameter to __blkdev_put(), which is a new internal
  function for the main blkdev_put*() functions. [parameter unused
  on non-lockdep kernels, except for two sanity check WARN_ON()s]

these functions carry no semantical difference - they only express
object dependencies towards the lockdep subsystem.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:10 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
602cada851 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...
2006-06-29 14:19:21 -07:00
Adrian Bunk
cfb9e32f2f [PATCH] drivers/md/raid5.c: remove an unused variable
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Greg Kroah-Hartman
890fbae281 [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
Just removes a few unused #defines and fixes some comments due to
devfs now being gone.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:09 -07:00
Greg Kroah-Hartman
ce7b0f46bb [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
And remove the now unneeded number field.
Also fixes all drivers that set these fields.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman
96192ff1a9 [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
Also fixes all drivers that set this field.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman
ff23eca3e8 [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
Also fixes up all files that #include it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman
8ab5e4c15b [PATCH] devfs: Remove devfs_remove() function from the kernel tree
Removes the devfs_remove() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:07 -07:00
Greg Kroah-Hartman
1a715c5cf9 [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
Removes the devfs_mk_bdev() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:06 -07:00
Greg Kroah-Hartman
95dc112a57 [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
Removes the devfs_mk_dir() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:06 -07:00
Adrian Bunk
0538195424 [PATCH] drivers/md/md.c: make code static
Make needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:40 -07:00
NeilBrown
f655675b3f [PATCH] md: Allow the write_mostly flag to be set via sysfs
It appears in /sys/mdX/md/dev-YYY/state
and can be set or cleared by writing 'writemostly' or '-writemostly'
respectively.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:40 -07:00
NeilBrown
a94213b1fa [PATCH] md: Allow resync_start to be set and queried via sysfs
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:40 -07:00
NeilBrown
d4dbd0250e [PATCH] md: Allow raid 'layout' to be read and set via sysfs
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
45dc2de1e5 [PATCH] md: Allow rdev state to be set via sysfs
The md/dev-XXX/state file can now be written:

 "faulty" simulates an error on the device
 "remove" removes the device from the array (if it is not busy)

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
9e653b6342 [PATCH] md: Set/get state of array via sysfs
This allows the state of an md/array to be directly controlled via sysfs and
adds the ability to stop and array without tearing it down.

Array states/settings:

 clear
     No devices, no size, no level
     Equivalent to STOP_ARRAY ioctl
 inactive
     May have some settings, but array is not active
        all IO results in error
     When written, doesn't tear down array, but just stops it
 suspended (not supported yet)
     All IO requests will block. The array can be reconfigured.
     Writing this, if accepted, will block until array is quiescent
 readonly
     no resync can happen.  no superblocks get written.
     write requests fail
 read-auto
     like readonly, but behaves like 'clean' on a write request.

 clean - no pending writes, but otherwise active.
     When written to inactive array, starts without resync
     If a write request arrives then
       if metadata is known, mark 'dirty' and switch to 'active'.
       if not known, block and switch to write-pending
     If written to an active array that has pending writes, then fails.
 active
     fully active: IO and resync can be happening.
     When written to inactive array, starts with resync

 write-pending (not supported yet)
     clean, but writes are blocked waiting for 'active' to be written.

 active-idle
     like active, but no writes have been seen for a while (100msec).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
4254376914 [PATCH] md: Don't write dirty/clean update to spares - leave them alone
- record the 'event' count on each individual device (they
  might sometimes be slightly different now)
- add a new value for 'sb_dirty': '3' means that the super
  block only needs to be updated to record a clean<->dirty
  transition.
- Prefer odd event numbers for dirty states and even numbers
  for clean states
- Using all the above, don't update the superblock on
  a spare device if the update is just doing a clean-dirty
  transition.  To accomodate this, a transition from
  dirty back to clean might now decrement the events counter
  if nothing else has changed.

The net effect of this is that spare drives will not see any IO requests
during normal running of the array, so they can go to sleep if that is what
they want to do.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
07d84d109d [PATCH] md: Allow re-add to work on array without bitmaps
When an array has a bitmap, a device can be removed and re-added and only
blocks changes since the removal (as recorded in the bitmap) will be resynced.

It should be possible to do a similar thing to arrays without bitmaps.  i.e.
if a device is removed and re-added and *no* changes have been made in the
interim, then the add should not require a resync.

This patch allows that option.  This means that when assembling an array one
device at a time (e.g.  during device discovery) the array can be enabled
read-only as soon as enough devices are available, but extra devices can still
be added without causing a resync.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
3285edf152 [PATCH] md: Fix bug that stops raid5 resync from happening
As data_disks is *less* than raid_disks, the current test here is obviously
wrong.  And as the difference is already available in conf->max_degraded, it
makes much more sense to use that.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
akpm@osdl.org
b3cc9ec76b [PATCH] md: Fix Kconfig error
RAID5 recently changed to RAID456

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
Justin Piszcz
4d2554d045 [PATCH] md: md Kconfig speeling feex
I was experimenting with Linux SW raid today and found a spelling error when
reading the help menus...  (and fly spell found more).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00