Commit Graph

13597 Commits

Author SHA1 Message Date
Ryusuke Konishi
0bd49f9446 nilfs2: buffer and page operations
This adds common routines for buffer/page operations used in B-tree
node caches, meta data files, or segment constructor (log writer).

NILFS uses copy functions for buffers and pages due to the following
reasons:

 1) Relocation required for COW
    Since NILFS changes address of on-disk blocks, moving buffers
    in page cache is needed for the buffers which are not addressed
    by a file offset.  If buffer size is smaller than page size,
    this involves partial copy of pages.

 2) Freezing mmapped pages
    NILFS calculates checksums for each log to ensure its validity.
    If page data changes after the checksum calculation, this validity
    check will not work correctly.  To avoid this failure for mmaped
    pages, NILFS freezes their data by copying.

 3) Copy-on-write for DAT pages
    NILFS makes clones of DAT page caches in a copy-on-write manner
    during GC processes, and this ensures atomicity and consistency
    of the DAT in the transient state.

In addition, NILFS uses two obsolete functions, nilfs_mark_buffer_dirty()
and nilfs_clear_page_dirty() respectively.

* nilfs_mark_buffer_dirty() was required to avoid NULL pointer
  dereference faults:

  Since the page cache of B-tree node pages or data page cache of pseudo
  inodes does not have a valid mapping->host, calling mark_buffer_dirty()
  for their buffers causes the fault; it calls __mark_inode_dirty(NULL)
  through __set_page_dirty().

* nilfs_clear_page_dirty() was needed in the two cases:

 1) For B-tree node pages and data pages of the dat/gcdat, NILFS2 clears
    page dirty flags when it copies back pages from the cloned cache
    (gcdat->{i_mapping,i_btnode_cache}) to its original cache
    (dat->{i_mapping,i_btnode_cache}).

 2) Some B-tree operations like insertion or deletion may dispose buffers
    in dirty state, and this needs to cancel the dirty state of their
    pages.  clear_page_dirty_for_io() caused faults because it does not
    clear the dirty tag on the page cache.

Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:13 -07:00
Ryusuke Konishi
a60be987d4 nilfs2: B-tree node cache
This adds routines for B-tree node buffers.

Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:13 -07:00
Koji Sato
36a580eb48 nilfs2: direct block mapping
This adds block mappings using direct pointers which are stored in the
i_bmap array of inode.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:13 -07:00
Koji Sato
17c76b0104 nilfs2: B-tree based block mapping
This adds declarations and functions of NILFS2 B-tree.

Two variants are integrated in the NILFS2 B-tree.  The B-tree for the most
files points to the child nodes or data blocks with virtual block
addresses, whereas the B-tree of the DAT uses actual block addresses.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:13 -07:00
Koji Sato
bdb265eae0 nilfs2: integrated block mapping
This adds structures and operations for the block mapping (bmap for
short).  NILFS2 uses direct mappings for short files or B-tree based
mappings for longer files.

Every on-disk data block is held with inodes and managed through this
block mapping.  The nilfs_bmap structure and a set of functions here
provide this capability to the NILFS2 inode.

[penberg@cs.helsinki.fi: remove a bunch of bmap wrapper macros]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:13 -07:00
Ryusuke Konishi
65b4643d3b nilfs2: add inode and other major structures
This adds the following common structures of the NILFS2 file system.

* nilfs_inode_info structure:
  gives on-memory inode.

* nilfs_sb_info structure:
  keeps per-mount state and a special inode for the ifile.
  This structure is attached to the super_block structure.

* the_nilfs structure:
  keeps shared state and locks among a read/write mount and snapshot
  mounts.  This keeps special inodes for the sufile, cpfile, dat, and
  another dat inode used during GC (gcdat).  This also has a hash table
  of dummy inodes to cache disk blocks during GC (gcinodes).

* nilfs_transaction_info structure:
  keeps per task state while nilfs is writing logs or doing indivisible
  inode or namespace operations.  This structure is used to identify
  context during log making and store nest level of the lock which
  ensures atomicity of file system operations.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:12 -07:00
Coly Li
8a59f5d252 fs/romfs: return f_fsid for statfs(2)
Make romfs return f_fsid info for statfs(2).

Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Serge E. Hallyn
909e6d9479 namespaces: move proc_net_get_sb to a generic fs/super.c helper
The mqueuefs filesystem will use this helper as well.  Proc's main get_sb
could also be made to use it, but that will require a bit more rework.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:09 -07:00
KAMEZAWA Hiroyuki
6260a4b052 /proc/pid/maps: don't show pgoff of pure ANON VMAs
Recently, it's argued that what proc/pid/maps shows is ugly when a 32bit
binary runs on 64bit host.

/proc/pid/maps outputs vma's pgoff member but vma->pgoff is of no use
information is the vma is for ANON.  With this patch, /proc/pid/maps shows
just 0 if no file backing store.

[akpm@linux-foundation.org: coding-style fixes]
[kamezawa.hiroyu@jp.fujitsu.com: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mike Waychison <mikew@google.com>
Reported-by: Ying Han <yinghan@google.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:03 -07:00
Ingo Molnar
f8201abcb2 ramfs: fix double freeing s_fs_info on failed mount
If ramfs mount fails, s_fs_info will be freed twice in ramfs_fill_super()
and ramfs_kill_sb(), leading to kernel oops.

Consolidate and beautify the code.
Make sure s_fs_info and s_root are in known good states.

Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 07:39:59 -07:00
Trond Myklebust
d508afb437 NFS: Fix a double free in nfs_parse_mount_options()
Due to an apparent typo, commit a67d18f89f
(NFS: load the rpc/rdma transport module automatically) lead to the
'proto=' mount option doing a double free, while Opt_mountproto leaks a
string.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 17:19:48 -07:00
Linus Torvalds
bbae8bcc49 ext3: make default data ordering mode configurable
This makes the defautl ext3 data ordering mode (when no explicit
ordering is set) configurable, so as to allow people to default to
'data=writeback' and get the resulting latency improvements.

This is a non-issue if a filesystem has been explicitly set to some
ordering (with 'tune2fs').

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 17:16:47 -07:00
Linus Torvalds
e0724bf6e4 Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix recovery bug
  UBIFS: add R/O compatibility
  UBIFS: fix compiler warnings
  UBIFS: fully sort GCed nodes
  UBIFS: fix commentaries
  UBIFS: introduce a helpful variable
  UBIFS: use KERN_CONT
  UBIFS: fix lprops committing bug
  UBIFS: fix bogus assertion
  UBIFS: fix bug where page is marked uptodate when out of space
  UBIFS: amend key_hash return value
  UBIFS: improve find function interface
  UBIFS: list usage cleanup
  UBIFS: fix dbg_chk_lpt_sz()
2009-04-06 15:00:19 -07:00
Linus Torvalds
22ae77bc7a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (53 commits)
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] [NOR] Fixup for Numonyx M29W128 chips
  [MTD] mtdpart: Make ecc_stats more realistic.
  powerpc/85xx: TQM8548: Update DTS file for multi-chip support
  powerpc: NAND: FSL UPM: document new bindings
  [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays
  [MTD] [NAND] FSL-UPM: add multi chip support
  [MTD] [NOR] Add device parent info to physmap_of
  [MTD] [NAND] Add support for NAND on the Socrates board
  [MTD] [NAND] Add support for 4KiB pages.
  [MTD] sysfs support should not depend on CONFIG_PROC_FS
  [MTD] [NAND] Add parent info for CAFÉ controller
  [MTD] support driver model updates
  [MTD] driver model updates (part 2)
  [MTD] driver model updates
  [MTD] [NAND] move gen_nand's probe function to .devinit.text
  [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text
  [MTD] fix use after free in register_mtd_blktrans
  [MTD] [MAPS] Drop now unused sharpsl-flash map
  [MTD] ofpart: Check name property to determine partition nodes.
  ...

Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06 14:56:26 -07:00
Linus Torvalds
12fe32e4f9 Merge branch 'kmemtrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'kmemtrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kmemtrace: trace kfree() calls with NULL or zero-length objects
  kmemtrace: small cleanups
  kmemtrace: restore original tracing data binary format, improve ABI
  kmemtrace: kmemtrace_alloc() must fill type_id
  kmemtrace: use tracepoints
  kmemtrace, rcu: don't include unnecessary headers, allow kmemtrace w/ tracepoints
  kmemtrace, rcu: fix rcupreempt.c data structure dependencies
  kmemtrace, rcu: fix rcu_tree_trace.c data structure dependencies
  kmemtrace, rcu: fix linux/rcutree.h and linux/rcuclassic.h dependencies
  kmemtrace, mm: fix slab.h dependency problem in mm/failslab.c
  kmemtrace, kbuild: fix slab.h dependency problem in lib/decompress_unlzma.c
  kmemtrace, kbuild: fix slab.h dependency problem in lib/decompress_bunzip2.c
  kmemtrace, kbuild: fix slab.h dependency problem in lib/decompress_inflate.c
  kmemtrace, squashfs: fix slab.h dependency problem in squasfs
  kmemtrace, befs: fix slab.h dependency problem
  kmemtrace, security: fix linux/key.h header file dependencies
  kmemtrace, fs: fix linux/fdtable.h header file dependencies
  kmemtrace, fs: uninline simple_transaction_set()
  kmemtrace, fs, security: move alloc_secdata() and free_secdata() to linux/security.h
2009-04-06 13:30:00 -07:00
Linus Torvalds
a63856252d Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: (81 commits)
  nfsd41: define nfsd4_set_statp as noop for !CONFIG_NFSD_V4
  nfsd41: define NFSD_DRC_SIZE_SHIFT in set_max_drc
  nfsd41: Documentation/filesystems/nfs41-server.txt
  nfsd41: CREATE_EXCLUSIVE4_1
  nfsd41: SUPPATTR_EXCLCREAT attribute
  nfsd41: support for 3-word long attribute bitmask
  nfsd: dynamically skip encoded fattr bitmap in _nfsd4_verify
  nfsd41: pass writable attrs mask to nfsd4_decode_fattr
  nfsd41: provide support for minor version 1 at rpc level
  nfsd41: control nfsv4.1 svc via /proc/fs/nfsd/versions
  nfsd41: add OPEN4_SHARE_ACCESS_WANT nfs4_stateid bmap
  nfsd41: access_valid
  nfsd41: clientid handling
  nfsd41: check encode size for sessions maxresponse cached
  nfsd41: stateid handling
  nfsd: pass nfsd4_compound_state* to nfs4_preprocess_{state,seq}id_op
  nfsd41: destroy_session operation
  nfsd41: non-page DRC for solo sequence responses
  nfsd41: Add a create session replay cache
  nfsd41: create_session operation
  ...
2009-04-06 13:25:56 -07:00
Benny Halevy
f0ad670d70 nfsd41: define NFSD_DRC_SIZE_SHIFT in set_max_drc
Fixes the following compiler error:
fs/nfsd/nfssvc.c: In function 'set_max_drc':
fs/nfsd/nfssvc.c:240: error: 'NFSD_DRC_SIZE_SHIFT' undeclared

CONFIG_NFSD_V4 is not set

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-06 09:17:53 -07:00
Jens Axboe
1aa2a7cc6f block: switch sync_dirty_buffer() over to WRITE_SYNC
We should now have the logic in place to handle this properly
without regressing on the write performance, so re-enable
the sync writes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe
aeb6fafb8f block: Add flag for telling the IO schedulers NOT to anticipate more IO
By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.

Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe
4194b1eaf1 jbd2: use WRITE_SYNC_PLUG instead of WRITE_SYNC
When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe
6c4bac6b33 jbd: use WRITE_SYNC_PLUG instead of WRITE_SYNC
When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:53 -07:00
Jens Axboe
9cf6b720f8 block: fsync_buffers_list() should use SWRITE_SYNC_PLUG
Then it can submit all the buffers without unplugging for each one.
We will kick off the pending IO if we come across a new address space.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:53 -07:00
Linus Torvalds
714f83d5d9 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c
2009-04-05 11:04:19 -07:00
Thiemo Nagel
e44543b83b ext4: Fix off-by-one-error in ext4_valid_extent_idx()
Signed-off-by: Thiemo Nagel <thiemo.nagel@ph.tum.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-04-04 23:30:44 -04:00
Thiemo Nagel
f73953c065 ext4: Fix big-endian problem in __ext4_check_blockref()
Commit fe2c8191 introduced a regression on big-endian system, because
the checks to make sure block references in non-extent inodes are
valid failed to use le32_to_cpu().

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Thiemo Nagel <thiemo.nagel@ph.tum.de>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-04-07 18:46:47 -04:00
Linus Torvalds
601cc11d05 Make non-compat preadv/pwritev use native register size
Instead of always splitting the file offset into 32-bit 'high' and 'low'
parts, just split them into the largest natural word-size - which in C
terms is 'unsigned long'.

This allows 64-bit architectures to avoid the unnecessary 32-bit
shifting and masking for native format (while the compat interfaces will
obviously always have to do it).

This also changes the order of 'high' and 'low' to be "low first".  Why?
Because when we have it like this, the 64-bit system calls now don't use
the "pos_high" argument at all, and it makes more sense for the native
system call to simply match the user-mode prototype.

This results in a much more natural calling convention, and allows the
compiler to generate much more straightforward code.  On x86-64, we now
generate

        testq   %rcx, %rcx      # pos_l
        js      .L122   #,
        movq    %rcx, -48(%rbp) # pos_l, pos

from the C source

        loff_t pos = pos_from_hilo(pos_h, pos_l);
	...
        if (pos < 0)
                return -EINVAL;

and the 'pos_h' register isn't even touched.  It used to generate code
like

        mov     %r8d, %r8d      # pos_low, pos_low
        salq    $32, %rcx       #, tmp71
        movq    %r8, %rax       # pos_low, pos.386
        orq     %rcx, %rax      # tmp71, pos.386
        js      .L122   #,
        movq    %rax, -48(%rbp) # pos.386, pos

which isn't _that_ horrible, but it does show how the natural word size
is just a more sensible interface (same arguments will hold in the user
level glibc wrapper function, of course, so the kernel side is just half
of the equation!)

Note: in all cases the user code wrapper can again be the same. You can
just do

	#define HALF_BITS (sizeof(unsigned long)*4)
	__syscall(PWRITEV, fd, iov, count, offset, (offset >> HALF_BITS) >> HALF_BITS);

or something like that.  That way the user mode wrapper will also be
nicely passing in a zero (it won't actually have to do the shifts, the
compiler will understand what is going on) for the last argument.

And that is a good idea, even if nobody will necessarily ever care: if
we ever do move to a 128-bit lloff_t, this particular system call might
be left alone.  Of course, that will be the least of our worries if we
really ever need to care, so this may not be worth really caring about.

[ Fixed for lost 'loff_t' cast noticed by Andrew Morton ]

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ralf Baechle <ralf@linux-mips.org>>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-04 14:20:34 -07:00
Benny Halevy
79fb54abd2 nfsd41: CREATE_EXCLUSIVE4_1
Implement the CREATE_EXCLUSIVE4_1 open mode conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

This mode allows the client to atomically create a file
if it doesn't exist while setting some of its attributes.

It must be implemented if the server supports persistent
reply cache and/or pnfs.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:23 -07:00
Benny Halevy
8c18f2052e nfsd41: SUPPATTR_EXCLCREAT attribute
Return bitmask for supported EXCLUSIVE4_1 create attributes.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:23 -07:00
Andy Adamson
7e70570647 nfsd41: support for 3-word long attribute bitmask
Also, use client minorversion to generate supported attrs

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:23 -07:00
Benny Halevy
95ec28cda3 nfsd: dynamically skip encoded fattr bitmap in _nfsd4_verify
_nfsd4_verify currently skips 3 words from the encoded buffer begining.
With support for 3-word attr bitmaps in nfsd41, nfsd4_encode_fattr
may encode 1, 2, or 3 words, and not always 2 as it used to be, hence
we need to find out where to skip using the encoded bitmap length.

Note: This patch may be applied over pre-nfsd41 nfsd.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:22 -07:00
Benny Halevy
c0d6fc8a2d nfsd41: pass writable attrs mask to nfsd4_decode_fattr
In preparation for EXCLUSIVE4_1

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:22 -07:00
Benny Halevy
8daf220a6a nfsd41: control nfsv4.1 svc via /proc/fs/nfsd/versions
Support enabling and disabling nfsv4.1 via /proc/fs/nfsd/versions
by writing the strings "+4.1" or "-4.1" correspondingly.

Use user mode nfs-utils (rpc.nfsd option) to enable.
This will allow us to get rid of CONFIG_NFSD_V4_1

[nfsd41: disable support for minorversion by default]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:21 -07:00
Andy Adamson
84459a1162 nfsd41: add OPEN4_SHARE_ACCESS_WANT nfs4_stateid bmap
Separate the access bits from the want bits and enable __set_bit to
work correctly with st_access_bmap.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:21 -07:00
Andy Adamson
d87a8ade95 nfsd41: access_valid
For nfs41, the open share flags are used also for
delegation "wants" and "signals".  Check that they are valid.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:21 -07:00
Andy Adamson
60adfc50de nfsd41: clientid handling
Extract the clientid from sessionid to set the op_clientid on open.
Verify that the clid for other stateful ops is zero for minorversion != 0
Do all other checks for stateful ops without sessions.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixed whitespace indent]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from nfsd4_open]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:20 -07:00
Andy Adamson
496c262cf0 nfsd41: check encode size for sessions maxresponse cached
Calculate the space the compound response has taken after encoding the current
operation.

pad: add on 8 bytes for the next operation's op_code and status so that
there is room to cache a failure on the next operation.

Compare this length to the session se_fmaxresp_cached and return
nfserr_rep_too_big_to_cache if the length is too large.

Our se_fmaxresp_cached will always be a multiple of PAGE_SIZE, and so
will be at least a page and will therefore hold the xdr_buf head.

Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd41: non-page DRC for solo sequence responses]
[fixed nfsd4_check_drc_limit cosmetics]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfsd4_check_drc_limit]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:20 -07:00
Andy Adamson
6668958fac nfsd41: stateid handling
When sessions are used, stateful operation sequenceid and stateid handling
are not used. When sessions are used,  on the first open set the seqid to 1,
mark state confirmed and skip seqid processing.

When sessionas are used the stateid generation number is ignored when it is zero
whereas without sessions bad_stateid or stale stateid is returned.

Add flags to propagate session use to all stateful ops and down to
check_stateid_generation.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd4_has_session should return a boolean, not u32]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: pass nfsd4_compoundres * to nfsd4_process_open1]
[nfsd41: calculate HAS_SESSION in nfs4_preprocess_stateid_op]
[nfsd41: calculate HAS_SESSION in nfs4_preprocess_seqid_op]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:19 -07:00
Benny Halevy
dd453dfd70 nfsd: pass nfsd4_compound_state* to nfs4_preprocess_{state,seq}id_op
Currently we only use cstate->current_fh,
will also be used by nfsd41 code.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:19 -07:00
Benny Halevy
e10e0cfc2f nfsd41: destroy_session operation
Implement the destory_session operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:19 -07:00
Andy Adamson
bf864a31d5 nfsd41: non-page DRC for solo sequence responses
A session inactivity time compound (lease renewal) or a compound where the
sequence operation has sa_cachethis set to FALSE do not require any pages
to be held in the v4.1 DRC. This is because struct nfsd4_slot is already
caching the session information.

Add logic to the nfs41 server to not cache response pages for solo sequence
responses.

Return nfserr_replay_uncached_rep on the operation following the sequence
operation when sa_cachethis is FALSE.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfsd4_replay_cache_entry]
[nfsd41: rename nfsd4_no_page_in_cache]
[nfsd41 rename nfsd4_enc_no_page_replay]
[nfsd41 nfsd4_is_solo_sequence]
[nfsd41 change nfsd4_not_cached return]
Signed-off-by: Andy Adamson <andros@netapp.com>
[changed return type to bool]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 drop parens in nfsd4_is_solo_sequence call]
Signed-off-by: Andy Adamson <andros@netapp.com>
[changed "== 0" to "!"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:19 -07:00
Andy Adamson
38eb76a54d nfsd41: Add a create session replay cache
Replace the nfs4_client cl_seqid field with a single struct nfs41_slot used
for the create session replay cache.

The CREATE_SESSION slot sets the sl_session pointer to NULL. Otherwise, the
slot and it's replay cache are used just like the session slots.

Fix unconfirmed create_session replay response by initializing the
create_session slot sequence id to 0.

A future patch will set the CREATE_SESSION cache when a SEQUENCE operation
preceeds the CREATE_SESSION operation. This compound is currently only cached
in the session slot table.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: revert portion of nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netpp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:18 -07:00
Andy Adamson
ec6b5d7b50 nfsd41: create_session operation
Implement the create_session operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Look up the client id (generated by the server on exchange_id,
given by the client on create_session).
If neither a confirmed or unconfirmed client is found
then the client id is stale
If a confirmed cilent is found (i.e. we already received
create_session for it) then compare the sequence id
to determine if it's a replay or possibly a mis-ordered rpc.
If the seqid is in order, update the confirmed client seqid
and procedd with updating the session parameters.

If an unconfirmed client_id is found then verify the creds
and seqid.  If both match move the client id to confirmed state
and proceed with processing the create_session.

Currently, we do not support persistent sessions, and RDMA.

alloc_init_session generates a new sessionid and creates
a session structure.

NFSD_PAGES_PER_SLOT is used for the max response cached calculation, and for
the counting of DRC pages using the hard limits set in struct srv_serv.

A note on NFSD_PAGES_PER_SLOT:

Other patches in this series allow for NFSD_PAGES_PER_SLOT + 1 pages to be
cached in a DRC slot when the response size is less than NFSD_PAGES_PER_SLOT *
PAGE_SIZE but xdr_buf pages are used. e.g. a READDIR operation will encode a
small amount of data in the xdr_buf head, and then the READDIR in the xdr_buf
pages.  So, the hard limit calculation use of pages by a session is
underestimated by the number of cached operations using the xdr_buf pages.

Yet another patch caches no pages for the solo sequence operation, or any
compound where cache_this is False.  So the hard limit calculation use of
pages by a session is overestimated by the number of these operations in the
cache.

TODO: improve resource pre-allocation and negotiate session
parameters accordingly.  Respect and possibly adjust
backchannel attributes.

Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
[nfsd41: remove headerpadsz from channel attributes]
Our client and server only support a headerpadsz of 0.
[nfsd41: use DRC limits in fore channel init]
[nfsd41: do not change CREATE_SESSION back channel attrs]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[use sessionid_lock spin lock]
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from alloc_init_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[simplify nfsd4_encode_create_session error handling]
[nfsd41: fix comment style in init_forechannel_attrs]
[nfsd41: allocate struct nfsd4_session and slot table in one piece]
[nfsd41: no need to INIT_LIST_HEAD in alloc_init_session just prior to list_add]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:18 -07:00
Andy Adamson
14778a133e nfsd41: clear DRC cache on free_session
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:18 -07:00
Andy Adamson
da3846a286 nfsd41: nfsd DRC logic
Replay a request in nfsd4_sequence.
Add a minorversion to struct nfsd4_compound_state.

Pass the current slot to nfs4svc_encode_compound res via struct
nfsd4_compoundres to set an NFSv4.1 DRC entry.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfs4svc_encode_compoundres]
[nfsd41 replace nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:17 -07:00
Andy Adamson
c3d06f9ce8 nfsd41: hard page limit for DRC
Use no more than 1/128th of the number of free pages at nfsd startup for the
v4.1 DRC.

This is an arbitrary default which should probably end up under the control
of an administrator.

Signed-off-by: Andy Adamson <andros@netapp.com>
[moved added fields in struct svc_serv under CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[fix set_max_drc calculation of sv_drc_max_pages]
[moved NFSD_DRC_SIZE_SHIFT's declaration up in header file]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:17 -07:00
Andy Adamson
074fe89753 nfsd41: DRC save, restore, and clear functions
Cache all the result pages, including the rpc header in rq_respages[0],
for a request in the slot table cache entry.

Cache the statp pointer from nfsd_dispatch which points into rq_respages[0]
just past the rpc header. When setting a cache entry, calculate and save the
length of the nfs data minus the rpc header for rq_respages[0].

When replaying a cache entry, replace the cached rpc header with the
replayed request rpc result header, unless there is not enough room in the
cached results first page. In that case, use the cached rpc header.

The sessions fore channel maxresponse size cached is set to NFSD_PAGES_PER_SLOT
* PAGE_SIZE. For compounds we are cacheing with operations such as READDIR
that use the xdr_buf->pages to hold data, we choose to cache the extra page of
data rather than copying data from xdr_buf->pages into the xdr_buf->head page.

[nfsd41: limit cache to maxresponsesize_cached]
[nfsd41: mv nfsd4_set_statp under CONFIG_NFSD_V4_1]
[nfsd41: rename nfsd4_move_pages]
[nfsd41: rename page_no variable]
[nfsd41: rename nfsd4_set_cache_entry]
[nfsd41: fix nfsd41_copy_replay_data comment]
[nfsd41: add to nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:17 -07:00
Andy Adamson
f9bb94c4c6 nfsd41: enforce NFS4ERR_SEQUENCE_POS operation order rules for minorversion != 0 only.
Signed-off-by: Andy Adamson<andros@netapp.com>
[nfsd41: do not verify nfserr_sequence_pos for minorversion 0]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:16 -07:00
Benny Halevy
b85d4c01b7 nfsd41: sequence operation
Implement the sequence operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Check for stale clientid (as derived from the sessionid).
Enforce slotid range and exactly-once semantics using
the slotid and seqid.

If everything went well renew the client lease and
mark the slot INPROGRESS.

Add a struct nfsd4_slot pointer to struct nfsd4_compound_state.
To be used for sessions DRC replay.

[nfsd41: rename sequence catchthis to cachethis]
Signed-off-by: Andy Adamson<andros@netapp.com>
[pulled some code to set cstate->slot from "nfsd DRC logic"]
[use sessionid_lock spin lock]
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd: add a struct nfsd4_slot pointer to struct nfsd4_compound_state]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: add nfsd4_session pointer to nfsd4_compound_state]
[nfsd41: set cstate session]
[nfsd41: use cstate session in nfsd4_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[simplify nfsd4_encode_sequence error handling]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:16 -07:00
Andy Adamson
a1bcecd29c nfsd41: match clientid establishment method
We need to distinguish between client names provided by NFSv4.0 clients
SETCLIENTID and those provided by NFSv4.1 via EXCHANGE_ID when looking
up the clientid by string.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd41: use boolean values for use_exchange_id argument]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: simplify match_clientid_establishment logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:15 -07:00
Andy Adamson
0733d21338 nfsd41: exchange_id operation
Implement the exchange_id operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-28

Based on the client provided name, hash a client id.
If a confirmed one is found, compare the op's creds and
verifier.  If the creds match and the verifier is different
then expire the old client (client re-incarnated), otherwise,
if both match, assume it's a replay and ignore it.

If an unconfirmed client is found, then copy the new creds
and verifer if need update, otherwise assume replay.

The client is moved to a confirmed state on create_session.

In the nfs41 branch set the exchange_id flags to
EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_SUPP_MOVED_REFER
(pNFS is not supported, Referrals are supported,
Migration is not.).

Address various scenarios from section 18.35 of the spec:

1. Check for EXCHGID4_FLAG_UPD_CONFIRMED_REC_A and set
   EXCHGID4_FLAG_CONFIRMED_R as appropriate.

2. Return error codes per 18.35.4 scenarios.

3. Update client records or generate new client ids depending on
   scenario.

Note: 18.35.4 case 3 probably still needs revisiting.  The handling
seems not quite right.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamosn <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use utsname for major_id (and copy to server_scope)]
[nfsd41: fix handling of various exchange id scenarios]
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse use of EXCHGID4_INVAL_FLAG_MASK_A]
[simplify nfsd4_encode_exchange_id error handling]
[nfsd41: embed an xdr_netobj in nfsd4_exchange_id]
[nfsd41: return nfserr_serverfault for spa_how == SP4_MACH_CRED]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:15 -07:00
Andy Adamson
069b6ad4bb nfsd41: proc stubs
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:14 -07:00
Andy Adamson
2db134eb3b nfsd41: xdr infrastructure
Define nfsd41_dec_ops vector and add it to nfsd4_minorversion for
minorversion 1.

Note: nfsd4_enc_ops vector is shared for v4.0 and v4.1
since we don't need to filter out obsolete ops as this is
done in the decoding phase.

exchange_id, create_session, destroy_session, and sequence ops are
implemented as stubs returning nfserr_opnotsupp at this stage.

[was nfsd41: xdr stubs]
[get rid of CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:14 -07:00
Marc Eshel
5282fd724b nfsd41: sessionid hashing
Simple sessionid hashing using its monotonically increasing sequence number.

Locking considerations:
sessionid_hashtbl access is controlled by the sessionid_lock spin lock.
It must be taken for insert, delete, and lookup.
nfsd4_sequence looks up the session id and if the session is found,
it calls nfsd4_get_session (still under the sessionid_lock).
nfsd4_destroy_session calls nfsd4_put_session after unhashing
it, so when the session's kref reaches zero it's going to get freed.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[we don't use a prime for sessionid hash table size]
[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:14 -07:00
Marc Eshel
c4bf786806 nfsd41: release_session when client is expired
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[add CONFIG_NFSD_V4_1 to fix v4.0 regression bug]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:13 -07:00
Marc Eshel
9fb870702d nfsd41: introduce nfs4_client cl_sessions list
[get rid of CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:13 -07:00
Andy Adamson
7116ed6b99 nfsd41: sessions basic data types
This patch provides basic data structures representing the nfs41
sessions and slots, plus helpers for keeping a reference count
on the session and freeing it.

Note that our server only support a headerpadsz of 0 and
it ignores backchannel attributes at the moment.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: remove headerpadsz from channel attributes]
[nfsd41: embed nfsd4_channel in nfsd4_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from nfsd4_slot]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:13 -07:00
Andy Adamson
2f425878b6 nfsd: don't use the deferral service, return NFS4ERR_DELAY
On an NFSv4.1 server cache miss that causes an upcall, NFS4ERR_DELAY will be
returned. It is up to the NFSv4.1 client to resend only the operations that
have not been processed.

Initialize rq_usedeferral to 1 in svc_process(). It sill be turned off in
nfsd4_proc_compound() only when NFSv4.1 Sessions are used.

Note: this isn't an adequate solution on its own. It's acceptable as a way
to get some minimal 4.1 up and working, but we're going to have to find a
way to avoid returning DELAY in all common cases before 4.1 can really be
considered ready.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse rq_nodeferral negative logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[sunrpc: initialize rq_usedeferral]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 17:41:12 -07:00
Linus Torvalds
f945b7abcb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: allow private mappings of "direct_io" files
  fuse: allow kernel to access "direct_io" files
2009-04-03 15:27:58 -07:00
Linus Torvalds
811158b147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...
2009-04-03 15:24:35 -07:00
Linus Torvalds
b983471794 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: BUG to BUG_ON changes
  Btrfs: remove dead code
  Btrfs: remove dead code
  Btrfs: fix typos in comments
  Btrfs: remove unused ftrace include
  Btrfs: fix __ucmpdi2 compile bug on 32 bit builds
  Btrfs: free inode struct when btrfs_new_inode fails
  Btrfs: fix race in worker_loop
  Btrfs: add flushoncommit mount option
  Btrfs: notreelog mount option
  Btrfs: introduce btrfs_show_options
  Btrfs: rework allocation clustering
  Btrfs: Optimize locking in btrfs_next_leaf()
  Btrfs: break up btrfs_search_slot into smaller pieces
  Btrfs: kill the pinned_mutex
  Btrfs: kill the block group alloc mutex
  Btrfs: clean up find_free_extent
  Btrfs: free space cache cleanups
  Btrfs: unplug in the async bio submission threads
  Btrfs: keep processing bios for a given bdev if our proc is batching
2009-04-03 15:14:44 -07:00
Srinivas Eeda
9140db04ef ocfs2: recover orphans in offline slots during recovery and mount
During recovery, a node recovers orphans in it's slot and the dead node(s). But
if the dead nodes were holding orphans in offline slots, they will be left
unrecovered.

If the dead node is the last one to die and is holding orphans in other slots
and is the first one to mount, then it only recovers it's own slot, which
leaves orphans in offline slots.

This patch queues complete_recovery to clean orphans for all offline slots
during mount and node recovery.

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:26 -07:00
Hisashi Hifumi
1fca3a05ef ocfs2: Pagecache usage optimization on ocfs2
A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:26 -07:00
wengang wang
6ca497a83e ocfs2: fix rare stale inode errors when exporting via nfs
For nfs exporting, ocfs2_get_dentry() returns the dentry for fh.
ocfs2_get_dentry() may read from disk when the inode is not in memory,
without any cross cluster lock. this leads to the file system loading a
stale inode.

This patch fixes above problem.

Solution is that in case of inode is not in memory, we get the cluster
lock(PR) of alloc inode where the inode in question is allocated from (this
causes node on which deletion is done sync the alloc inode) before reading
out the inode itsself. then we check the bitmap in the group (the inode in
question allcated from) to see if the bit is clear. if it's clear then it's
stale. if the bit is set, we then check generation as the existing code
does.

We have to read out the inode in question from disk first to know its alloc
slot and allot bit. And if its not stale we read it out using ocfs2_iget().
The second read should then be from cache.

And also we have to add a per superblock nfs_sync_lock to cover the lock for
alloc inode and that for inode in question. this is because ocfs2_get_dentry()
and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked
in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so
that mutliple ocfs2_delete_inode() can run concurrently in normal case.

[mfasheh@suse.com: build warning fixes and comment cleanups]
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:25 -07:00
Sunil Mushran
9405dccfd3 ocfs2/dlm: Tweak mle_state output
The debugfs file, mle_state, now prints the number of largest number of mles
in one hash link.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:25 -07:00
Sunil Mushran
516b7e52ab ocfs2/dlm: Do not purge lockres that is being migrated dlm_purge_lockres()
This patch attempts to fix a fine race between purging and migration.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:24 -07:00
Sunil Mushran
7141514b83 ocfs2/dlm: Remove struct dlm_lock_name in struct dlm_master_list_entry
This patch removes struct dlm_lock_name and adds the entries directly
to struct dlm_master_list_entry. Under the new scheme, both mles that
are backed by a lockres or not, will have the name populated in mle->mname.
This allows us to get rid of code that was figuring out the location of
the mle name.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:23 -07:00
Sunil Mushran
e64ff14607 ocfs2/dlm: Show the number of lockres/mles in dlm_state
This patch shows the number of lockres' and mles in the debugfs file, dlm_state.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:22 -07:00
Sunil Mushran
7d62a978a8 ocfs2/dlm: dlm_set_lockres_owner() and dlm_change_lockres_owner() inlined
This patch inlines dlm_set_lockres_owner() and dlm_change_lockres_owner().

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:21 -07:00
Sunil Mushran
6800791ab7 ocfs2/dlm: Improve lockres counts
This patch replaces the lockres counts that tracked the number number of
locally and remotely mastered lockres' with a current and total count. The
total count is the number of lockres' that have been created since the dlm
domain was created.

The number of locally and remotely mastered counts can be computed using
the locking_state output.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:21 -07:00
Sunil Mushran
2041d8fdce ocfs2/dlm: Track number of mles
The lifetime of a mle is limited to the duration of the lockres mastery
process. While typically this lifetime is fairly short, we have noticed
the number of mles explode under certain circumstances. This patch tracks
the number of each different types of mles and should help us determine
how best to speed up the mastery process.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:21 -07:00
Sunil Mushran
67ae1f0604 ocfs2/dlm: Indent dlm_cleanup_master_list()
The previous patch explicitly did not indent dlm_cleanup_master_list()
so as to make the patch readable. This patch properly indents the
function.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:21 -07:00
Sunil Mushran
2ed6c750d6 ocfs2/dlm: Activate dlm->master_hash for master list entries
With this patch, the mles are stored in a hash and not a simple list.
This should improve the mle lookup time when the number of outstanding
masteries is large.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:19 -07:00
Sunil Mushran
e2b66ddcce ocfs2/dlm: Create and destroy the dlm->master_hash
This patch adds code to create and destroy the dlm->master_hash.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:18 -07:00
Sunil Mushran
c2cd4a4433 ocfs2/dlm: Refactor dlm_clean_master_list()
This patch refactors dlm_clean_master_list() so as to make it
easier to convert the mle list to a hash.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:18 -07:00
Sunil Mushran
f77a9a78c3 ocfs2/dlm: Clean up struct dlm_lock_name
For master mle, the name it stored in the attached lockres in struct qstr.
For block and migration mle, the name is stored inline in struct dlm_lock_name.
This patch attempts to make struct dlm_lock_name look like a struct qstr. While
we could use struct qstr, we don't because we want to avoid having to malloc
and free the lockname string as the mle's lifetime is fairly short.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:18 -07:00
Sunil Mushran
1c0845773a ocfs2/dlm: Encapsulate adding and removing of mle from dlm->master_list
This patch encapsulates adding and removing of the mle from the
dlm->master_list. This patch is part of the series of patches that
converts the mle list to a mle hash.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:18 -07:00
Tao Ma
feb473a6e8 ocfs2: Optimize inode group allocation by recording last used group.
In ocfs2, the block group search looks for the "emptiest" group
to allocate from. So if the allocator has many equally(or almost
equally) empty groups, new block group will tend to get spread
out amongst them.

So we add osb_inode_alloc_group in ocfs2_super to record the last
used inode allocation group.
For more details, please see
http://oss.oracle.com/osswiki/OCFS2/DesignDocs/InodeAllocationStrategy.

I have done some basic test and the results are a ten times improvement on
some cold-cache stat workloads.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:18 -07:00
Tao Ma
60ca81e82d ocfs2: Allocate inode groups from global_bitmap.
Inode groups used to be allocated from local alloc file,
but since we want all inodes to be contiguous enough, we
will try to allocate them directly from global_bitmap.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:17 -07:00
Tao Ma
138211515c ocfs2: Optimize inode allocation by remembering last group
In ocfs2, the inode block search looks for the "emptiest" inode
group to allocate from. So if an inode alloc file has many equally
(or almost equally) empty groups, new inodes will tend to get
spread out amongst them, which in turn can put them all over the
disk. This is undesirable because directory operations on conceptually
"nearby" inodes force a large number of seeks.

So we add ip_last_used_group in core directory inodes which records
the last used allocation group. Another field named ip_last_used_slot
is also added in case inode stealing happens. When claiming new inode,
we passed in directory's inode so that the allocation can use this
information.
For more details, please see
http://oss.oracle.com/osswiki/OCFS2/DesignDocs/InodeAllocationStrategy.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:17 -07:00
Mark Fasheh
1d46dc08d3 ocfs2: fix leaf start calculation in ocfs2_dx_dir_rebalance()
ocfs2_dx_dir_rebalance() is passed the block offset of a dx leaf which needs
rebalancing. Since we rebalance an entire cluster at a time however, this
function needs to calculate the beginning of that cluster, in blocks. The
calculation was wrong, which would result in a read of non-leaf blocks. Fix
the calculation by adding ocfs2_block_to_cluster_start() which is a more
straight-forward way of determining this.

Reported-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:17 -07:00
Mark Fasheh
b80b549c35 ocfs2: re-order ocfs2_empty_dir checks
ocfs2_empty_dir() is far more expensive than checking link count. Since both
need to be checked at the same time, we can improve performance by checking
link count first.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:17 -07:00
Mark Fasheh
3a8df2b9c3 ocfs2: Enable indexed directories
Since the disk format is finalized, we can set this feature bit in the
supported mask.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
2009-04-03 11:39:16 -07:00
Mark Fasheh
e3a93c2db6 ocfs2: Add total entry count to dx_root_block
This little bit of extra accounting speeds up ocfs2_empty_dir()
dramatically by allowing us to short-circuit the full directory scan.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:16 -07:00
Mark Fasheh
198a1ca3b7 ocfs2: Increase max links count
Since we've now got a directory format capable of handling a large number of
entries, we can increase the maximum link count supported. This only gets
increased if the directory indexing feature is turned on.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03 11:39:16 -07:00
Mark Fasheh
e7c17e4309 ocfs2: Introduce dir free space list
The only operation which doesn't get faster with directory indexing is
insert, which still has to walk the entire unindexed directory portion to
find a free block. This patch provides an improvement in directory insert
performance by maintaining a singly linked list of directory leaf blocks
which have space for additional dirents.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03 11:39:16 -07:00
Mark Fasheh
4ed8a6bb08 ocfs2: Store dir index records inline
Allow us to store a small number of directory index records in the
ocfs2_dx_root_block. This saves us a disk read on small to medium sized
directories (less than about 250 entries). The inline root is automatically
turned into a root block with extents if the directory size increases beyond
it's capacity.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03 11:39:16 -07:00
Mark Fasheh
9b7895efac ocfs2: Add a name indexed b-tree to directory inodes
This patch makes use of Ocfs2's flexible btree code to add an additional
tree to directory inodes. The new tree stores an array of small,
fixed-length records in each leaf block. Each record stores a hash value,
and pointer to a block in the traditional (unindexed) directory tree where a
dirent with the given name hash resides. Lookup exclusively uses this tree
to find dirents, thus providing us with constant time name lookups.

Some of the hashing code was copied from ext3. Unfortunately, it has lots of
unfixed checkpatch errors. I left that as-is so that tracking changes would
be easier.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03 11:39:15 -07:00
Mark Fasheh
4a12ca3a00 ocfs2: Introduce dir lookup helper struct
Many directory manipulation calls pass around a tuple of dirent, and it's
containing buffer_head. Dir indexing has a bit more state, but instead of
adding yet more arguments to functions, we introduce 'struct
ocfs2_dir_lookup_result'. In this patch, it simply holds the same tuple, but
future patches will add more state.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03 11:39:15 -07:00
Sunil Mushran
59b526a307 ocfs2: Remove debugfs file local_alloc_stats
This patch removes the debugfs file local_alloc_stats as that information
is now included in the fs_state debugfs file.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:15 -07:00
Sunil Mushran
50397507e8 ocfs2: Expose the file system state via debugfs
This patch creates a per mount debugfs file, fs_state, which exposes
information like, cluster stack in use, states of the downconvert, recovery
and commit threads, number of journal txns, some allocation stats, list of
all slots, etc.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:15 -07:00
Sunil Mushran
96a6c64b53 ocfs2: Move struct recovery_map to a header file
Move the definition of struct recovery_map from journal.c to journal.h. This
is preparation for the next patch.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:14 -07:00
Sunil Mushran
87d3d3f393 ocfs2/hb: Expose the list of heartbeating nodes via debugfs
This patch creates a debugfs file, o2hb/livesnodes, which exposes the
aggregate list of heartbeating node across all heartbeat regions.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:14 -07:00
Linus Torvalds
20bec8ab14 Merge branch 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: Add replace-on-rename hueristics for data=writeback mode
  ext3: Add replace-on-truncate hueristics for data=writeback mode
  ext3: Use WRITE_SYNC for commits which are caused by fsync()
  block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
2009-04-03 11:10:33 -07:00
Linus Torvalds
3cc50ac0db Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache: (41 commits)
  NFS: Add mount options to enable local caching on NFS
  NFS: Display local caching state
  NFS: Store pages from an NFS inode into a local cache
  NFS: Read pages from FS-Cache into an NFS inode
  NFS: nfs_readpage_async() needs to be accessible as a fallback for local caching
  NFS: Add read context retention for FS-Cache to call back with
  NFS: FS-Cache page management
  NFS: Add some new I/O counters for FS-Cache doing things for NFS
  NFS: Invalidate FsCache page flags when cache removed
  NFS: Use local disk inode cache
  NFS: Define and create inode-level cache objects
  NFS: Define and create superblock-level objects
  NFS: Define and create server-level objects
  NFS: Register NFS for caching and retrieve the top-level index
  NFS: Permit local filesystem caching to be enabled for NFS
  NFS: Add FS-Cache option bit and debug bit
  NFS: Add comment banners to some NFS functions
  FS-Cache: Make kAFS use FS-Cache
  CacheFiles: A cache that backs onto a mounted filesystem
  CacheFiles: Export things for CacheFiles
  ...
2009-04-03 10:07:43 -07:00
Linus Torvalds
9b59f0316b Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  fs: Add exofs to Kernel build
  exofs: Documentation
  exofs: export_operations
  exofs: super_operations and file_system_type
  exofs: dir_inode and directory operations
  exofs: address_space_operations
  exofs: symlink_inode and fast_symlink_inode operations
  exofs: file and file_inode operations
  exofs: Kbuild, Headers and osd utils
2009-04-03 09:53:22 -07:00
Linus Torvalds
ac7c1a776d Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (61 commits)
  Revert "xfs: increase the maximum number of supported ACL entries"
  xfs: cleanup uuid handling
  xfs: remove m_attroffset
  xfs: fix various typos
  xfs: pagecache usage optimization
  xfs: remove m_litino
  xfs: kill ino64 mount option
  xfs: kill mutex_t typedef
  xfs: increase the maximum number of supported ACL entries
  xfs: factor out code to find the longest free extent in the AG
  xfs: kill VN_BAD
  xfs: kill vn_atime_* helpers.
  xfs: cleanup xlog_bread
  xfs: cleanup xlog_recover_do_trans
  xfs: remove another leftover of the old inode log item format
  xfs: cleanup log unmount handling
  Fix xfs debug build breakage by pushing xfs_error.h after
  xfs: include header files for prototypes
  xfs: make symbols static
  xfs: move declaration to header file
  ...
2009-04-03 09:52:29 -07:00
Linus Torvalds
03c3fa0a3b Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Don't write integrity descriptor too often
  udf: Try anchor in block 256 first
  udf: Some type fixes and cleanups
  udf: use hardware sector size
  udf: fix novrs mount option
  udf: Fix oops when invalid character in filename occurs
  udf: return f_fsid for statfs(2)
  udf: Add checks to not underflow sector_t
  udf: fix default mode and dmode options handling
  udf: fix sparse warnings:
  udf: unsigned last[i] cannot be less than 0
  udf: implement mode and dmode mounting options
  udf: reduce stack usage of udf_get_filename
  udf: reduce stack usage of udf_load_pvoldesc
  Fix the udf code not to pass structs on stack where possible.
  Remove struct typedefs from fs/udf/ecma_167.h et al.
2009-04-03 09:50:39 -07:00
Linus Torvalds
223cdea4c4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (53 commits)
  md/raid5 revise rules for when to update metadata during reshape
  md/raid5: minor code cleanups in make_request.
  md: remove CONFIG_MD_RAID_RESHAPE config option.
  md/raid5: be more careful about write ordering when reshaping.
  md: don't display meaningless values in sysfs files resync_start and sync_speed
  md/raid5: allow layout and chunksize to be changed on active array.
  md/raid5: reshape using largest of old and new chunk size
  md/raid5: prepare for allowing reshape to change layout
  md/raid5: prepare for allowing reshape to change chunksize.
  md/raid5: clearly differentiate 'before' and 'after' stripes during reshape.
  Documentation/md.txt update
  md: allow number of drives in raid5 to be reduced
  md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  md: add explicit method to signal the end of a reshape.
  md/raid5: enhance raid5_size to work correctly with negative delta_disks
  md/raid5: drop qd_idx from r6_state
  md/raid6: move raid6 data processing to raid6_pq.ko
  md: raid5 run(): Fix max_degraded for raid level 4.
  md: 'array_size' sysfs attribute
  md: centralize ->array_sectors modifications
  ...
2009-04-03 09:08:19 -07:00
David Howells
b797cac748 NFS: Add mount options to enable local caching on NFS
Add NFS mount options to allow the local caching support to be enabled.

The attached patch makes it possible for the NFS filesystem to be told to make
use of the network filesystem local caching service (FS-Cache).

To be able to use this, a recent nfsutils package is required.

There are three variant NFS mount options that can be added to a mount command
to control caching for a mount.  Only the last one specified takes effect:

 (*) Adding "fsc" will request caching.

 (*) Adding "fsc=<string>" will request caching and also specify a uniquifier.

 (*) Adding "nofsc" will disable caching.

For example:

	mount warthog:/ /a -o fsc

The cache of a particular superblock (NFS FSID) will be shared between all
mounts of that volume, provided they have the same connection parameters and
are not marked 'nosharecache'.

Where it is otherwise impossible to distinguish superblocks because all the
parameters are identical, but the 'nosharecache' option is supplied, a
uniquifying string must be supplied, else only the first mount will be
permitted to use the cache.

If there's a key collision, then the second mount will disable caching and give
a warning into the kernel log.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:48 +01:00
David Howells
5d1acff159 NFS: Display local caching state
Display the local caching state in /proc/fs/nfsfs/volumes.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:47 +01:00