Commit Graph

340 Commits

Author SHA1 Message Date
Brian Gerst
af4cd3fe4c [PATCH] Generic ioctl.h
Most arches copied the i386 ioctl.h.  Combine them into a generic header.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:34 -08:00
Linus Torvalds
80c0531514 Merge master.kernel.org:/pub/scm/linux/kernel/git/mingo/mutex-2.6 2006-01-09 17:31:38 -08:00
Nicolas Pitre
823d0f4f67 [PATCH] mutex subsystem, add include/asm-arm/mutex.h
add the ARM version of mutex.h, which is optimized in assembly for
ARMv6, and uses the xchg implementation on pre-ARMv6.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:18 -08:00
Ingo Molnar
ffbf670f5c [PATCH] mutex subsystem, add atomic_xchg() to all arches
add atomic_xchg() to all the architectures. Needed by the new mutex code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
2006-01-09 15:59:17 -08:00
Deepak Saxena
9d4ae7276a [ARM] 3070/2: Add __ioremap_pfn() API
Patch from Deepak Saxena

In working on adding 36-bit addressed supersection support to ioremap(),
I came to the conclusion that it would be far simpler to do so by just
splitting __ioremap() into a main external interface and adding an
__ioremap_pfn() function that takes a pfn + offset into the page that
__ioremap() can call. This way existing callers of __ioremap() won't have
to change their code and 36-bit systems will just call __ioremap_pfn()
and we will not have to deal with unsigned long long variables.

Note that __ioremap_pfn() should _NOT_ be called directly by drivers
but is reserved for use by arch_ioremap() implementations that map
32-bit resource regions into the real 36-bit address and then call
this new function.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 19:23:11 +00:00
Russell King
0a3a98f6dd Merge Linus' tree. 2006-01-09 19:18:33 +00:00
Russell King
8ef12c9f01 [ARM] AT91RM9200 doesn't need anything in dma.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:08:11 +00:00
SAN People
73a59c1c4a [ARM] 3240/2: AT91RM9200 support for 2.6 (Core)
Patch from SAN People

Following changes were made to clock.c:

1) Replaced <asm/hardware/clock.h> with <linux/clk.h>
2) Removed old unused clk_enable & clk_disable.
3) Replaced clk_use/clk_unuse with clk_enable/clk_disable.

Otherwise it's the same as the previous patch.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
Russell King
9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Jeff Dike
f8aaeacec1 [PATCH] consolidate asm/futex.h
Most of the architectures have the same asm/futex.h.  This consolidates them
into asm-generic, with the arches including it from their own asm/futex.h.

In the case of UML, this reverts the old broken futex.h and goes back to using
the same one as almost everyone else.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:39 -08:00
Ravikiran G Thirumalai
1fd73c6b67 [PATCH] Kill L1_CACHE_SHIFT_MAX
Kill L1_CACHE_SHIFT from all arches.  Since L1_CACHE_SHIFT_MAX is not used
anymore with the introduction of INTERNODE_CACHE, kill L1_CACHE_SHIFT_MAX.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:39 -08:00
Russell King
0fec53a24a [ARM] Remove EPXA10DB machine support
EPXA10DB seems to be uncared for:
- the "PLD" code has never been merged
- no one has reported that this platform has been broken since
  at least 2.6.10
- interest seems to have dried up around March 2003.

Therefore, remove EPXA10DB support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08 22:37:46 +00:00
Russell King
fe5dd7c73d [ARM] byteorder.h needs linux/compiler.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:55:50 +00:00
Russell King
f8ce25476d [ARM] Move asm/hardware/clock.h to linux/clk.h
This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:15:52 +00:00
Russell King
123656d4cc Merge with Linus' kernel. 2006-01-07 14:40:05 +00:00
Russell King
a62c80e559 [ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 13:52:45 +00:00
Andre McCurdy
6351610d69 [ARM] 3239/1: Add ARM optimised swab32
Patch from Andre McCurdy

Replaces generic swab32 routine with a more ARM friendly version.
Reduces kernel text size by approx 1200 bytes when compiled with
3.4.4 and approx 2400 bytes with 4.0.2

Probably some performance benefit as well.

Signed-off-by: Andre McCurdy <armccurdy@yahoo.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 11:39:20 +00:00
Christoph Lameter
d3cb487149 [PATCH] atomic_long_t & include/asm-generic/atomic.h V2
Several counters already have the need to use 64 atomic variables on 64 bit
platforms (see mm_counter_t in sched.h).  We have to do ugly ifdefs to fall
back to 32 bit atomic on 32 bit platforms.

The VM statistics patch that I am working on will also make more extensive
use of atomic64.

This patch introduces a new type atomic_long_t by providing definitions in
asm-generic/atomic.h that works similar to the c "long" type.  Its 32 bits
on 32 bit platforms and 64 bits on 64 bit platforms.

Also cleans up the determination of the mm_counter_t in sched.h.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:29 -08:00
Badari Pulavarty
f6b3ec238d [PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store
Here is the patch to implement madvise(MADV_REMOVE) - which frees up a
given range of pages & its associated backing store.  Current
implementation supports only shmfs/tmpfs and other filesystems return
-ENOSYS.

"Some app allocates large tmpfs files, then when some task quits and some
client disconnect, some memory can be released.  However the only way to
release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli

Databases want to use this feature to drop a section of their bufferpool
(shared memory segments) - without writing back to disk/swap space.

This feature is also useful for supporting hot-plug memory on UML.

Concerns raised by Andrew Morton:

- "We have no plan for holepunching!  If we _do_ have such a plan (or
  might in the future) then what would the API look like?  I think
  sys_holepunch(fd, start, len), so we should start out with that."

- Using madvise is very weird, because people will ask "why do I need to
  mmap my file before I can stick a hole in it?"

- None of the other madvise operations call into the filesystem in this
  manner.  A broad question is: is this capability an MM operation or a
  filesytem operation?  truncate, for example, is a filesystem operation
  which sometimes has MM side-effects.  madvise is an mm operation and with
  this patch, it gains FS side-effects, only they're really, really
  significant ones."

Comments:

- Andrea suggested the fs operation too but then it's more efficient to
  have it as a mm operation with fs side effects, because they don't
  immediatly know fd and physical offset of the range.  It's possible to
  fixup in userland and to use the fs operation but it's more expensive,
  the vmas are already in the kernel and we can use them.

Short term plan &  Future Direction:

- We seem to need this interface only for shmfs/tmpfs files in the short
  term.  We have to add hooks into the filesystem for correctness and
  completeness.  This is what this patch does.

- In the future, plan is to support both fs and mmap apis also.  This
  also involves (other) filesystem specific functions to be implemented.

- Current patch doesn't support VM_NONLINEAR - which can be addressed in
  the future.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrea Arcangeli <andrea@suse.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:22 -08:00
Jared Hulbert
5b2e98cdf3 [ARM] 3206/1: Modifications to the bus arbiter controller for the Intel PXA27x
Patch from Jared Hulbert

The following patch changes the bus arbiter controller settings
for the Intel PXA27x Application Processor Family.  Up to 5%
better video performance.  It parks the bus on the core while not
in use and sets the arbitration for other bus items.  The patch
only applies changes to the Intel Mainstone development platform.

This patch is not compatible with preproduction Intel PXA27x
silicon.

This patch is based on the Intel Linux Preview Kit released to the
public on 25 Feb. 2005 found at
ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/xscale/mainstone/02-25-2005/.

Signed-off-by: Justin A Treon <justin_treon@yahoo.com>
Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 21:12:26 +00:00
Deepak Saxena
54e269ead6 [ARM] 3226/1: IXP4xx runtime expansion bus window size configuration
Patch from Deepak Saxena

The expansion bus on the IXP46x NPU can be configured for either 32MiB or
16MiB windows and changing the configuration causes the base address for
each chip select for each region to change. Because of this, we cannot
hardcode the physical base as we currently do. This patch checks the
expansion bus configuration registers at runtime to determine the
appropriate window size. Note that this requires that the bootloader
already configured the device sizes appropriately, but I feel that is
valid assumption to make as the bootloader must configure and access
the flash window, the output display (LCD, LEDs, etc) window, and
other expansion bus devices.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:59:29 +00:00
Richard Purdie
b7557de41a [ARM] 3228/1: SharpSL: Move PM code to arch/arm/common
Patch from Richard Purdie

This patch moves a large chunk of the sharpsl_pm driver to
arch/arm/common so that it can be reused on other devices such as the
SL-5500 (collie). It also abstracts some functions from the core into
the machine and platform specific parts of the driver to aid reuse.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:55 +00:00
Linus Torvalds
d347da0def Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 2006-01-04 16:27:41 -08:00
Richard Purdie
81f280e22f [PATCH] USB: pxa27x OHCI - Separate platform code from main driver
To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.

This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:28 -08:00
Lennert Buytenhek
4c70b926c9 [ARM] 3225/1: add symbolic names for enp2611 gpio interrupts
Patch from Lennert Buytenhek

Add symbolic names for the five ixp2400 GPIO lines on the enp2611
that are used as interrupts.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:17 +00:00
Lennert Buytenhek
7a94283a7e [ARM] 3224/1: add masked thread interrupt status registers for ixp2000
Patch from Lennert Buytenhek

In its interrupt handler, the (NAPI) ixp2000 netdev driver needs to use
the masked thread interrupt status register (instead of the raw one) to
prevent scheduling polling when polling is already running when a TXdone
interrupt comes in.  The definitions for the masked status registers were
not in yet, so this patch adds them.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:16 +00:00
Lennert Buytenhek
b721243a67 [ARM] 3223/1: remove ixdp2x01 cs89x0 hack
Patch from Lennert Buytenhek

Remove the ixdp2x01 cs89x0 hack from ixp2000's io implementation.
Since the cs89x0 driver has been made properly aware of the odd way
the cs89x0 is hooked up on the ixdp2x01, we don't need this hack
anymore.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:15 +00:00
Rod Whitby
313cbb5519 [ARM] 3218/1: PAGE_SHIFT undeclared in arch-ixp4xx/memory.h (adjust_zones moved out of line)
Patch from Rod Whitby

PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:

CC [M] sound/core/memory.o
In file included from include/asm/memory.h:27,
from include/asm/io.h:28,
from sound/core/memory.c:24:
include/asm/arch/memory.h: In function `__arch_adjust_zones':
include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
in this function)

This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:

Russell King wrote:
> The error you see came up on SA1100.  The best solution was to move
> the __arch_adjust_zones() function out of line.  I suggest ixp4xx
> does the same.

I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:13 +00:00
Rod Whitby
3145d8a6cc [ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine support
Patch from Rod Whitby

This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product.  The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card.

Work on porting the latest 2.6.x kernel to this device is being done by
the NSLU2-Linux project (the same team who maintains the port to the
Linksys NSLU2 device).  In particular, the majority of this patch was
authored by Alessandro Zummo, based on the work done for MACH_NSLU2
support by the NSLU2-Linux core team of developers.

MACH_NAS100D (as implemented by this patch) can be enabled in jumbo
ixp4xx kernels without any affect on the other machines supported by
that kernel.

This patch applies cleanly against 2.6.15-rc7 and should be trivial to
apply to later kernel versions. It does not depend upon any other
patches.

Modified files (and number of lines inserted):
 arch/arm/mach-ixp4xx/Kconfig           |    8
 arch/arm/mach-ixp4xx/Makefile          |    1
 include/asm-arm/arch-ixp4xx/hardware.h |    1
 include/asm-arm/arch-ixp4xx/irqs.h     |    9
 include/asm-arm/arch-ixp4xx/nas100d.h  |   75
 arch/arm/mach-ixp4xx/nas100d-pci.c     |   77
 arch/arm/mach-ixp4xx/nas100d-power.c   |   69
 arch/arm/mach-ixp4xx/nas100d-setup.c   |  133

-- Rod Whitby (NSLU2-Linux project lead)

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:11 +00:00
Deepak Saxena
f7e8bbb820 [ARM] 3192/1: Remove gpio_isr_line_clear() API from IXP4xx
Patch from Deepak Saxena

Other than interrupt masking purposes, this API is only used when
configuring interrupt lines and this patch moves that functionality
directly into the ixp4xx_set_irq_type() implementation as board level
PCI code should not need to worry about those details.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:10 +00:00
Russell King
95ba9fb06b [ARM] Remove definition of MAX_DMA_CHANNELS to zero
Since we now only build arch/arm/kernel/dma.c on machine types
which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS
to 0 to indicate this - this definition becomes superfluous.
Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:51:51 +00:00
Russell King
d4c6fc9976 [ARM] Move common definition of MAX_DMA_ADDRESS to asm/dma.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:30:48 +00:00
Russell King
7cdad48297 [ARM] Remove '__address' from scatterlist and convert to DMA API
The old __address element in struct scatterlist remained from older
kernels because the ARM DMA emulation code made use of it.  Move
this field into struct dma_struct, and convert DMA emulation code
to setup a SG entry as required.

Also, convert DMA emulation code to use the new DMA API rather
than the PCI DMA API.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:08:30 +00:00
Russell King
333c9624b7 [ARM] Move ISA DMA bus_to_virt() out of set_dma_addr()
Allow the compiler to optimise the bus_to_virt(virt_to_bus())
transformation in the ARM ISA DMA interface.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 14:41:29 +00:00
Stephen Hemminger
3821af2fe1 [FLS64]: generic version
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:06 -08:00
Russell King
a8d3584a2d [ARM] Remove clk_use()/clk_unuse()
It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:41:37 +00:00
Russell King
f47fc0ac7e [ARM] Add additional documentation to the clock source framework
It seems that there's some confusion over how the clock source
framework should be used.  Add some additional comments to explain
the ambiguous areas.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:34:20 +00:00
Russell King
78ff18a412 [ARM] Cleanup ARM includes
arch/arm/kernel/entry-armv.S has contained a comment suggesting
that asm/hardware.h and asm/arch/irqs.h should be moved into the
asm/arch/entry-macro.S include.  So move the includes to these
two files as required.

Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h
includes which use those facilities, and remove asm/io.h from
kernel/process.c.

Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm
and arch/arm/mach-footbridge.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 17:39:34 +00:00
Daniel Jacobowitz
c2e2611425 [ARM] 3205/1: Handle new EABI relocations when loading kernel modules.
Patch from Daniel Jacobowitz

Handle new EABI relocations when loading kernel modules.  This is
necessary for CONFIG_AEABI kernels, and also for some broken
(since fixed) old ABI toolchains.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-14 22:04:22 +00:00
Deepak Saxena
5b35193f58 [ARM] 3199/1: Remove bogus function prototype from arch-pxa/irq.h
Patch from Deepak Saxena

This looks like a leftover from 2.4 days...

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-08 23:34:44 +00:00
Hiroki Kaminaga
31a5539e57 [ARM] 3194/1: add pfn_to_kaddr macro for ARM take2
Patch from Hiroki Kaminaga

This patch defines a new macro: pfn_to_kaddr(pfn).
Same macro is already defined on other arch, such as i386.

Signed-off-by: Hiroki Kaminaga <kaminaga@sm.sony.co.jp>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-05 10:55:00 +00:00
Deepak Saxena
a0d95af5c2 [ARM] 3191/1: Mark I/O pointer as const in __raw_reads[bwl]
Patch from Deepak Saxena

Mark the ioremap'd cookie/pointer in said functions as const since
we should not be actualy touching the data. This fixes a slew of
compile warnings on IXP4xx as our reads[bwl] already mark this
parameter as const.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-05 10:54:59 +00:00
Arthur Othieno
11849fe674 [ARM] sema_count() removal
sema_count() defined only for ARM but not used anywhere.

Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-01 20:58:01 +00:00
Russell King
00b4c90787 [ARM SMP] Use event instructions for spinlocks
ARMv6K CPUs have SEV (send event) and WFE (wait for event) instructions
which allow the CPU clock to be suspended until another CPU issues a
SEV, rather than spinning on the lock wasting power.  Make use of these
instructions.

Note that WFE does not wait if an event has been sent since the last WFE
cleared the event status, so although it may look racy, the instruction
implementation ensures that these are dealt with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-01 15:47:24 +00:00
Lucas Correia Villa Real
192cdc5809 [ARM] 3178/1: S3C2400 - adds GPIO registers definitions to regs-gpio.h
Patch from Lucas Correia Villa Real

This patch adds definitions to GPIO registers for the S3C2400 into
include/asm-arm/arch-s3c2410/regs-gpio.h.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28 18:08:43 +00:00
Russell King
225937bd5d [ARM] Remove asm/hardware.h include from SA1100 io.h
Unfortunately, we have a symbol clash between the SA-1100 header and
some drivers.  Since everywhere which needs SA1100 specifics includes
asm/hardware.h, we don't need to include it in the SA1100 io.h header.

In file included from drivers/net/wireless/wavelan_cs.p.h:459,
                 from drivers/net/wireless/wavelan_cs.c:60:
drivers/net/wireless/wavelan_cs.h:97:1: warning: "LCSR" redefined
In file included from include/asm/arch/hardware.h:56,
                 from include/asm/hardware.h:16,
                 from include/asm/arch/io.h:13,
                 from include/asm/io.h:71,
                 from drivers/net/wireless/wavelan_cs.p.h:433,
                 from drivers/net/wireless/wavelan_cs.c:60:
include/asm/arch/SA-1100.h:1907:1: warning: this is the location of the previous definition

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-25 15:33:12 +00:00
Adam Brooks
3238c448c6 [ARM] 3173/1: Fix to allow 2.6.15-rc2 to compile for IOP3xx boards
Patch from Adam Brooks

Fixes an issue in 2.6.15-rc2 that prevented compilation of kernels for IOP3xx boards.

Signed-off-by: Adam Brooks <adam.j.brooks@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-23 22:45:27 +00:00
Russell King
30a09616df [ARM] ebsa110: __arch_ioremap should be 3 args
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21 15:26:52 +00:00
Russell King
5aaf291056 [ARM] Add asm/memory.h to asm/numnodes.h
Since the defintion of NODES_SHIFT may be overridden in asm/arch/memory.h
it's important to include asm/memory.h into asm/numnodes.h to ensure
that the correct value is always defined.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21 15:26:18 +00:00
Kenneth Tan
19f07be3b8 [ARM] 3171/1: To add missing QMGR region size for IXP4XX
Patch from Kenneth Tan

To add queue manager region size which is missing from ixp4xx-regs.h

Signed-off-by: Kenneth Tan <chong.yin.tan@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21 15:17:07 +00:00