Commit Graph

97 Commits

Author SHA1 Message Date
Suresh Siddha
681ee44d40 x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUs
We need to fall back from logical-flat APIC mode to physical-flat mode
when we have more than 8 CPUs.  However, in the presence of CPU
hotplug(with bios listing not enabled but possible cpus as disabled cpus in
MADT), we have to consider the number of possible CPUs rather than
the number of current CPUs; otherwise we may cross the 8-CPU boundary
when CPUs are added later.

32bit apic code can use more cleanups (like the removal of vendor checks in
32bit default_setup_apic_routing()) and more unifications with 64bit code.
Yinghai has some patches in works already. This patch addresses the boot issue
that is reported in the virtualization guest context.

[ hpa: incorporated function annotation feedback from Yinghai Lu ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com>
Acked-by: Shaohui Zheng <shaohui.zheng@intel.com>
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-09 20:51:11 -08:00
Yinghai Lu
893f38d144 x86: Use find_e820() instead of hard coded trampoline address
Jens found the following crash/regression:

[    0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page

and

[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE

and bisected it to b24c2a9 ("x86: Move find_smp_config()
earlier and avoid bootmem usage").

It turns out the BIOS is using the first 64k for mptable,
without reserving it.

So try to find good range for the real-mode trampoline instead of
hard coding it, in case some bios tries to use that range for sth.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4B21630A.6000308@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-11 09:28:22 +01:00
Yinghai Lu
b24c2a925a x86: Move find_smp_config() earlier and avoid bootmem usage
Move the find_smp_config() call to before bootmem is initialized.
Use reserve_early() instead of reserve_bootmem() in it.

This simplifies the code, we only need to call find_smp_config()
once and can remove the now unneeded reserve parameter from
x86_init_mpparse::find_smp_config.

We thus also reduce x86's dependency on bootmem allocations.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B0BB9F2.70907@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-24 12:10:51 +01:00
Linus Torvalds
78f28b7c55 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  x86: Move get/set_wallclock to x86_platform_ops
  x86: platform: Fix section annotations
  x86: apic namespace cleanup
  x86: Distangle ioapic and i8259
  x86: Add Moorestown early detection
  x86: Add hardware_subarch ID for Moorestown
  x86: Add early platform detection
  x86: Move tsc_init to late_time_init
  x86: Move tsc_calibration to x86_init_ops
  x86: Replace the now identical time_32/64.c by time.c
  x86: time_32/64.c unify profile_pc
  x86: Move calibrate_cpu to tsc.c
  x86: Make timer setup and global variables the same in time_32/64.c
  x86: Remove mca bus ifdef from timer interrupt
  x86: Simplify timer_ack magic in time_32.c
  x86: Prepare unification of time_32/64.c
  x86: Remove do_timer hook
  x86: Add timer_init to x86_init_ops
  x86: Move percpu clockevents setup to x86_init_ops
  x86: Move xen_post_allocator_init into xen_pagetable_setup_done
  ...

Fix up conflicts in arch/x86/include/asm/io_apic.h
2009-09-18 14:05:47 -07:00
Thomas Gleixner
b3f1b617f4 x86: Move get/find_smp_config to x86_init_ops
Replace the quirk machinery by a x86_init_ops function which defaults
to the standard implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 09:35:45 +02:00
Thomas Gleixner
90e1c6969d x86: Move oem_bus_info to x86_init_ops
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:53 +02:00
Thomas Gleixner
52fdb56846 x86: Move mpc_oem_pci_bus to x86_init_ops
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
72302142e1 x86: Move smp_read_mpc_oem to x86_init_ops.
Move smp_read_mpc_oem from quirks to x86_init.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
fd6c666149 x86: Move mpc_apic_id to x86_init_ops
The mpc_apic_id setup is handled by a x86_quirk. Make it a
x86_init_ops function with a default implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
f4848472cd x86: Sanitize smp_record and move it to x86_init_ops
The x86 quirkification introduced an extra ugly hackery with a
variable pointer in the mpparse code. If the pointer is initialized
then it is dereferenced and the variable set to 0 or incremented.

Create a x86_init_ops function and let the affected numaq code
hold the function. Default init is a setup noop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Cyrill Gorcunov
8f3e1df48b x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant
We already have APIC_DEFAULT_PHYS_BASE so just to be
consistent.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090824175550.927946757@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-26 08:16:38 +02:00
Yinghai Lu
f1bdb52388 x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
Len expressed concern that the update_mptable feature has
side-effects on the ACPI code.

Make it sure explicitly that the code only ever gets called if
the (default disabled) update_mptable boot quirk option is
disabled.

[ Impact: isolate the update_mptable feature from ACPI code more ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A0DC832.5090200@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 09:33:29 +02:00
Yinghai Lu
629e15d245 x86, irq: update_mptable needs pci_routeirq
To get all device irq routing and to save them.

This is basically an implicit pci=routeirq enablement if (and on if)
the update_mptable boot option (which is off by default) has been
specified.

[ Impact: extend the update_mptable boot opion's scope ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <4A0DB7B4.4060702@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 09:33:17 +02:00
Yinghai Lu
ee214558c2 x86: fix alloc_mptable()
Fix the conditions when we stop updating the mptable due to
running out of slots.

[ Impact: fix memory corruption / non-working update_mptable boot parameter ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3BB.1000609@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:07 +02:00
Rakib Mullick
575922248c x86: Fix section mismatches in mpparse
Impact: fix section mismatch

In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called
and also refers to a function which is in .init section. Thus causes
the first warning. And check_irq_src() also requires an __init,
because it refers to an .init section.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <b9df5fa10904102004g51265d9axc8d07278bfdb6ba0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 12:32:18 +02:00
Jaswinder Singh Rajput
0b3ba0c3cc x86: mpparse.c introduce check_physptr helper function
To reduce the size of the oversized function __get_smp_config()

There should be no impact to functionality.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 14:15:43 +05:30
Jaswinder Singh Rajput
5a5737eac2 x86: mpparse.c introduce smp_dump_mptable helper function
smp_read_mpc() and replace_intsrc_all() can use same smp_dump_mptable()

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 14:15:11 +05:30
Ingo Molnar
c58603e81b x86: mpparse: clean up code by introducing a few helper functions, fix
Impact: fix boot crash

This fixes commit a683027856.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1237403503.22438.21.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-19 08:52:13 +01:00
Jaswinder Singh Rajput
a683027856 x86: mpparse: clean up code by introducing a few helper functions
Impact: cleanup

Refactor the MP-table parsing code via the introduction of the
following helper functions:

  skip_entry()
  smp_reserve_bootmem()
  check_irq_src()
  check_slot()

To simplify the code flow and to reduce the size of the
following oversized functions: smp_read_mpc(), smp_scan_config().

There should be no impact to functionality.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 17:15:05 +01:00
Jan Beulich
82034d6f59 x86: clean up output resulting from update_mptable option
Impact: cleanup

Without apic=verbose, using the update_mptable option would result in
garbled and confusing output due to the inconsistent use of printk() vs
apic_printk().

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B914B6.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 02:37:19 +01:00
Yinghai Lu
f62432395e x86: reserve exact size of mptable
Impact: save a bit of RAM

Get the exact size for the reserve_bootmem() call.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49AE4922.605@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-04 20:55:04 +01:00
Yinghai Lu
8d4dd919b4 x86: ioremap mptable
Impact: fix boot with mptable above max_low_mapped

Try to use early_ioremap() to map MPC to make sure it works even it is
at the end of ram.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49AE4901.3090801@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-and-tested-by: Kevin O'Connor <kevin@koconnor.net>
2009-03-04 20:55:04 +01:00
Yinghai Lu
ecda06289f x86: check mptable physptr with max_low_pfn on 32bit
Impact: fix early crash on LinuxBIOS systems

Kevin O'Connor reported that Coreboot aka LinuxBIOS tries to put
mptable somewhere very high, well above max_low_pfn (below which
BIOSes generally put the mptable), causing a panic.

The BIOS will probably be changed to be compatible with older
Linus versions, but nevertheless the MP-spec does not forbid
an MP-table in arbitrary system RAM, so make sure it all
works even if the table is in an unexpected place.

Check physptr with max_low_pfn * PAGE_SIZE.

Reported-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Stefan Reinauer <stepan@coresystems.de>
Cc: coreboot@coreboot.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 07:41:31 +01:00
Ingo Molnar
7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Jaswinder Singh Rajput
ba1511bf7f x86: kernel/mpparse.c fix compilation warnings
arch/x86/kernel/mpparse.c: In function ‘smp_scan_config’:
 arch/x86/kernel/mpparse.c:696: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 3 has type ‘phys_addr_t’
 arch/x86/kernel/mpparse.c: In function ‘update_mp_table’:
 arch/x86/kernel/mpparse.c:1014: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘phys_addr_t’

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-11 21:01:08 +01:00
Ingo Molnar
8f47e16348 x86: update copyrights
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31 04:21:18 +01:00
Yinghai Lu
26f7ef14a7 x86: don't treat bigsmp as non-standard
just like 64 bit switch from flat logical APIC messages to
flat physical mode automatically.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 15:24:37 +01:00
Ingo Molnar
e0c7ae376a x86: rename X86_GENERICARCH to X86_32_NON_STANDARD
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.

Rename it to X86_32_NON_STANDARD.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:17:20 +01:00
Ingo Molnar
1dcdd3d15e x86: remove mach_apic.h
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects
on smp.h and apic.h.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:42 +01:00
Ingo Molnar
1f75ed0c13 x86: remove mach_apicdef.h
Move its definitions into apic.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:36 +01:00
Ingo Molnar
fb5b33c9f6 x86: eliminate asm/mach-*/mach_mpparse.h
Move the definition to mpparse.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:35 +01:00
Ingo Molnar
9c7642470e x86: consolidate the ->mps_oem_check() code
- spread out the mps_oem_check() namespace on a per APIC driver basis

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:28 +01:00
Ingo Molnar
1322a2e2db x86, mpparse: call the generic quirk handlers early
Call all the registered MPS quirk handlers early. These methods scan
low RAM typically for specific signatures so are safe to be called
early.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:28 +01:00
Ingo Molnar
72ce016583 x86, apic: clean up ->setup_apic_routing()
- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:22 +01:00
Ingo Molnar
7f268f4352 Merge branches 'cpus4096', 'x86/cleanups' and 'x86/urgent' into x86/percpu 2009-01-15 13:18:57 +01:00
Jaswinder Singh Rajput
c2c21745ec x86: replacing mp_config_intsrc with mpc_intsrc
Impact: cleanup, solve 80 columns wrap problems

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 11:58:35 +01:00
Jaswinder Singh Rajput
b5ba7e6d1e x86: replacing mp_config_ioapic with mpc_ioapic
Impact: cleanup, solve 80 columns wrap problems

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 11:58:27 +01:00
Jaswinder Singh Rajput
4884d8e6a0 x86: fix mpparse.c build error on latest git
Fix this by reintroducing asm/smp.h include in mpparse.c - later on
I will fix this by removing non-smp data from smp.h.

Reported-by: Petr Titera <P.Titera@century.cz>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 19:24:22 +01:00
Jaswinder Singh Rajput
1eb1b3b65d x86: rename all fields of mpf_intel mpf_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpf->mpf_X fields to
mpf->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpf' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-08 15:37:37 +01:00
Jaswinder Singh Rajput
41401db698 x86: rename intel_mp_floating to mpf_intel
Impact: cleanup, solve 80 columns wrap problems

intel_mp_floating should be renamed to mpf_intel.

The reason: the 'f' in MPF already means 'floating'
which means MP Floating pointer structure -
no need to repeat that in the type name.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-08 15:37:37 +01:00
Ingo Molnar
0936912274 Merge branches 'x86/cleanups', 'x86/mpparse', 'x86/numa' and 'x86/uv' into x86/urgent 2009-01-06 17:39:52 +01:00
Huang Weiyi
9e9197370d x86: remove duplicated #include's
Removed duplicated #include's in:

  arch/x86/kernel/mpparse.c
  arch/x86/kernel/nmi.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-06 13:34:03 +01:00
Alan Cox
87c6fe2618 x86: update Alan Cox's email addresses
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 15:19:16 +01:00
Jaswinder Singh Rajput
6c65da50bd x86: rename all fields of mpc_table mpc_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpc->mpc_X fields to
mpc->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpc' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 14:08:34 +01:00
Jaswinder Singh Rajput
d4c715fad5 x86: rename all fields of mpc_bus mpc_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpc->mpc_X fields to
mpc->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpc' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 14:08:33 +01:00
Jaswinder Singh Rajput
c4563826b7 x86: rename all fields of mpc_cpu mpc_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpc->mpc_X fields to
mpc->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpc' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 14:08:33 +01:00
Jaswinder Singh Rajput
e253b396b1 x86: rename all fields of mpc_intsrc mpc_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpc->mpc_X fields to
mpc->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpc' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 14:08:32 +01:00
Jaswinder Singh Rajput
b5ced7cdb0 x86: rename all fields of mpc_lintsrc mpc_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpc->mpc_X fields to
mpc->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpc' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 14:08:31 +01:00
Jaswinder Singh Rajput
5df82c7d18 x86: rename all fields of mpc_iopic mpc_X to X
Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpc->mpc_X fields to
mpc->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpc' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 14:08:31 +01:00
Jaswinder Singh Rajput
b0e239ffad x86: rename mpc_config_oemtable to mpc_oemtable
Impact: cleanup, solve 80 columns wrap problems

mpc_config_oemtable should be renamed to mpc_oemtable.

The reason: the 'c' in MPC already means 'config' -
no need to repeat that in the type name.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04 13:23:02 +01:00