Commit Graph

18 Commits

Author SHA1 Message Date
Mike Frysinger
09ebdedf48 Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK
This code was useful during early port development when our icache code
wasn't solid, but that ship has sailed long ago, and no code calls this
function anymore (irq_panic).  So punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 17:24:00 -04:00
Graf Yang
c429886a70 Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
NMIs are not safe to return from because many anomaly workarounds are
implemented by disabling interrupts.  The NMI obviously violates this
assumption.  Since the NMI watchdog never returns, we don't have to
worry about it clobbering RETN when it is being used as a scratch register
with the exception stack.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:04 -04:00
Robin Getz
6ce3e9c2a2 Blackfin: add support for the DBGA (debug assert) pseudo insn
A few pseudo debug insns exist to make testing of simulators easier.
Since these don't actually exist in the hardware, we have to have the
exception handler take care of emulating these.  This allows sim test
cases to be executed unmodified under Linux and thus simplify debugging
greatly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:18:56 -04:00
Mike Frysinger
652afdc340 Blackfin: move KGDB selection to the way other arches do it
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang
60ffdb3654 Blackfin: implement nmi_watchdog for SMP on BF561
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Mike Frysinger
c40cdb2cbd Blackfin: add some isram-driver self tests
Make it easy to figure out if code changes here are correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:36 -04:00
Robin Getz
b9a3899d59 Blackfin: make deferred hardware errors more exact
Hardware errors on the Blackfin architecture are queued by nature of the
hardware design.  Things that could generate a hardware level queue up at
the system interface and might not process until much later, at which
point the system would send a notification back to the core.

As such, it is possible for user space code to do something that would
trigger a hardware error, but have it delay long enough for the process
context to switch.  So when the hardware error does signal, we mistakenly
evaluate it as a different process or as kernel context and panic (erp!).
This makes it pretty difficult to find the offending context.  But wait,
there is good news somewhere.

By forcing a SSYNC in the interrupt entry, we force all pending queues at
the system level to be processed and all hardware errors to be signaled.
Then we check the current interrupt state to see if the hardware error is
now signaled.  If so, we re-queue the current interrupt and return thus
allowing the higher priority hardware error interrupt to process properly.
Since we haven't done any other context processing yet, the right context
will be selected and killed.  There is still the possibility that the
exact offending instruction will be unknown, but at least we'll have a
much better idea of where to look.

The downside of course is that this causes system-wide syncs at every
interrupt point which results in significant performance degradation.
Since this situation should not occur in any properly configured system
(as hardware errors are triggered by things like bad pointers), make it a
debug configuration option and disable it by default.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:44 -04:00
Mike Frysinger
34d464f8aa Blackfin arch: use common KGDB_TESTS rather than our own KGDB_TESTCASE
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-02 18:14:47 +08:00
Mike Frysinger
e60cb8a9eb Blackfin arch: change HWTRACE Kconfig and set it on default
change the hwtrace description to be less confusing and default it to on
(since there shouldnt be any crashes in the miss handler code itself)

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Mike Frysinger
459249aa2d Blackfin arch: merge kgdb test code using common CONFIG_KGDB_TESTS
[Grace Pan <grace.pan@analog.com>: Add case for kgdb test in l1 and l2]

Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Robin Getz
a45d575f53 Blackfin arch: Add basic irq stack checking for Blackfin
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Robin Getz
9f06c38fb2 Blackfin arch: Add optional verbose debug
Add optional verbose debug - which when turned off, quiets down
userspace errors. Saves ~8k of code/data for production systems

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-10 18:13:21 +08:00
Sonic Zhang
0cfbb3234c Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09 17:39:37 +08:00
Sonic Zhang
a5ac012924 Blackfin arch: add supporting for kgdb
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13 14:07:19 +08:00
Robin Getz
0c7a6b2135 Blackfin arch: add supporting for double fault debug handling
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08 16:27:12 +08:00
Yi Li
7dee62ac5a Blackfin arch: Do not need this dualcore test module in kernel.
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 20:53:46 +08:00
Mike Frysinger
cf93425d40 [Blackfin] arch: add slightly better help text for CPLB_INFO
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02 15:32:40 +08:00
Mike Frysinger
74ce8322bf Blackfin arch: split debug stuff off into Kconfig.debug like everyone else
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 23:50:49 +08:00