In the process of writing up the mechanical proof of correctness for the
dynticks/preemptable-RCU interface, I noticed misplaced memory barriers in
rcu_enter_nohz() and rcu_exit_nohz().
This patch puts them in the right place and adds a comment. The key thing to
keep in mind is that rcu_enter_nohz() is -exiting- the mode that can legally
execute RCU read-side critical sections.
The memory barrier must be between any potential RCU read-side critical
sections and the increment of the per-CPU dynticks_progress_counter, and thus
must come -before- this increment. And vice versa for rcu_exit_nohz().
The locking in the scheduler is probably saving us for the moment.
Also, switch to smp_mb() - we don't need a barrier for uniprocessor kernels.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since 4c7ffe0b9f ("fbdev: prevent drivers that
have hardware cursors from calling software cursor code") every call of
i810fb_cursor fails with -ENXIO because of a incorrect "!".
This hasn't struck until eaa0ff15c3 ("fix !
versus & precedence in various places") surrounded the expression with braces,
so that the intended behavior was inverted. That caused 'pixel waste' - the
same line of multi-colored pixels repeated over the whole screen - during
console switch.
This switches back to the original pre-4c7ffe0 behavior.
Signed-off-by: Stefan Bauer <stefan.bauer@cs.tu-chemnitz.de>
Tested-by: Stefan Bauer <stefan.bauer@cs.tu-chemnitz.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a long-standing typo (predating git) that will cause data corruption if a
journal data block needs unescaping. At the moment the wrong buffer head's
data is being unescaped.
To test this case mount a filesystem with data=journal, start creating and
deleting a bunch of files containing only JBD2_MAGIC_NUMBER (0xc03b3998), then
pull the plug on the device. Without this patch the files will contain zeros
instead of the correct data after recovery.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a long-standing typo (predating git) that will cause data corruption if a
journal data block needs unescaping. At the moment the wrong buffer head's
data is being unescaped.
To test this case mount a filesystem with data=journal, start creating and
deleting a bunch of files containing only JFS_MAGIC_NUMBER (0xc03b3998), then
pull the plug on the device. Without this patch the files will contain zeros
instead of the correct data after recovery.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the SYSV ipc msgctl(),semctl(),shmctl() family, if the user passed *_INFO
as the desired operation, no specific object is meant to be controlled and
only system-wide information is returned. This leads to a NULL IPC object in
the LSM hooks if the _INFO flag is given.
Avoid dereferencing this NULL pointer in Smack ipc *ctl() methods.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix up an error in iget removal in which romfs_lookup() making a successful
call to romfs_iget() continues through the negative/error handling (previously
the successful case jumped around the negative/error handling case):
(1) inode is initialised to NULL at the top of the function, eliminating the
need for specific negative-inode handling. This means the positive
success handling now flows straight through.
(2) Rename the labels to be clearer about what they mean.
Also make romfs_lookup()'s result variable of type long so as to avoid
32-bit/64-bit conversions with PTR_ERR() and friends.
Based upon a report and patch from Adam Richter.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: "Adam J. Richter" <adam@yggdrasil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several places where we make allocations with GFP_KERNEL while under
a transaction, which could lead to an assertion panic or lockup if under
memory pressure. This patch switches these problem areas to use GFP_NOFS to
keep these problems from happening.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ibmpex's temperature sensors report incorrect units. Apply a conversion
factor so that tempertures report correctly. Until now, no systems seemed to
report temperatures this way, but evidently QS2x blades do.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enhanced the list of supported machines.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The QS2x blades ships with v2.54 of the firmware, which use the same
multiplier for all power meters.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should always put inode we have reference to, even if quota was reenabled
in the mean time.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The check t->pid == t->pid is not the blessed way to check whether a task is a
group leader.
This is not about the code beautifulness only, but about pid namespaces fixes
- both the tgid and the pid fields on the task_struct are (slowly :( )
becoming deprecated.
Besides, the thread_group_leader() macro makes only one dereference :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Exposing the binary blob which is the md 'super-block' via sysfs doesn't
really fit with the whole sysfs model, and ever since commit
8118a859dc ("sysfs: fix off-by-one error
in fill_read_buffer()") it doesn't actually work at all (as the size of
the blob is often one page).
(akpm: as in, fs/sysfs/file.c:fill_read_buffer() goes BUG)
So just remove it altogether. It isn't really useful.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct kernel-doc function names and parameters in rmap.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert tiny-shmem.c function comments to kernel-doc. Add parameters and
convert/fix other kernel-doc in shmem.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix various kernel-doc notation in mm/:
filemap.c: add function short description; convert 2 to kernel-doc
fremap.c: change parameter 'prot' to @prot
pagewalk.c: change "-" in function parameters to ":"
slab.c: fix short description of kmem_ptr_validate()
swap.c: fix description & parameters of put_pages_list()
swap_state.c: fix function parameters
vmalloc.c: change "@returns" to "Returns:" since that is not a parameter
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My group ran into a AIO process hang on a 2.6.24 kernel with the process
sleeping indefinitely in io_getevents(2) waiting for the last wakeup to come
and it never would.
We ran the tests on x86_64 SMP. The hang only occurred on a Xeon box
("Clovertown") but not a Core2Duo ("Conroe"). On the Xeon, the L2 cache isn't
shared between all eight processors, but is L2 is shared between between all
two processors on the Core2Duo we use.
My analysis of the hang is if you go down to the second while-loop
in read_events(), what happens on processor #1:
1) add_wait_queue_exclusive() adds thread to ctx->wait
2) aio_read_evt() to check tail
3) if aio_read_evt() returned 0, call [io_]schedule() and sleep
In aio_complete() with processor #2:
A) info->tail = tail;
B) waitqueue_active(&ctx->wait)
C) if waitqueue_active() returned non-0, call wake_up()
The way the code is written, step 1 must be seen by all other processors
before processor 1 checks for pending events in step 2 (that were recorded by
step A) and step A by processor 2 must be seen by all other processors
(checked in step 2) before step B is done.
The race I believed I was seeing is that steps 1 and 2 were
effectively swapped due to the __list_add() being delayed by the L2
cache not shared by some of the other processors. Imagine:
proc 2: just before step A
proc 1, step 1: adds to ctx->wait, but is not visible by other processors yet
proc 1, step 2: checks tail and sees no pending events
proc 2, step A: updates tail
proc 1, step 3: calls [io_]schedule() and sleeps
proc 2, step B: checks ctx->wait, but sees no one waiting, skips wakeup
so proc 1 sleeps indefinitely
My patch adds a memory barrier between steps A and B. It ensures that the
update in step 1 gets seen on processor 2 before continuing. If processor 1
was just before step 1, the memory barrier makes sure that step A (update
tail) gets seen by the time processor 1 makes it to step 2 (check tail).
Before the patch our AIO process would hang virtually 100% of the time. After
the patch, we have yet to see the process ever hang.
Signed-off-by: Quentin Barnes <qbarnes+linux@yahoo-inc.com>
Reviewed-by: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: <stable@kernel.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ We should probably disallow that "if (waitqueue_active()) wake_up()"
coding pattern, because it's so often buggy wrt memory ordering ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
async_tx: avoid the async xor_zero_sum path when src_cnt > device->max_xor
fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.
This reverts commit 2c81ce4c9c.
It caused several new troubles (eg suspend slowdown bisected down to
this patch by Pavel Machek), so just revert it for now.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we handle all the special commands using REQ_TYPE_ATA_TASKFILE
rather than using the old REQ_TYPE_ATA_CMD model, we need to also
emulate the lack of full taskfile data that comes with the old command
model (ie when commands are generated with the HDIO_DRIVE_CMD ioctl
rather than using the HDIO_DRIVE_TASK[FILE] ioctls).
In particular, this means that we should handle command completion the
more relaxed way that the old drive_cmd_intr() code did. It allows
commands to finish early even if they don't use up all the data that we
thought we had for them.
This fixes a regression seen by Anders Eriksson where some SMART
commands sent by smartd would cause a boot-time system hang on his
machine because the IDE command handling code didn't realize that the
command had completed.
Tested-by: Anders Eriksson <aeriksson@fastmail.fm>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WAKE_IDLE is too agressive on multi-core CPUs with the new
wake-affine code, keep it on for SMT/HT balancing alone
(where there's no cache affinity at all between logical CPUs).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Wakeup-buddy tasks are cache-hot - this makes it a bit harder
for the load-balancer to tear them apart. (but it's still possible,
if the load is sufficiently assymetric)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
improve affine wakeups. Maintain the 'overlap' metric based on CFS's
sum_exec_runtime - which means the amount of time a task executes
after it wakes up some other task.
Use the 'overlap' for the wakeup decisions: if the 'overlap' is short,
it means there's strong workload coupling between this task and the
woken up task. If the 'overlap' is large then the workload is decoupled
and the scheduler will move them to separate CPUs more easily.
( Also slightly move the preempt_check within try_to_wake_up() - this has
no effect on functionality but allows 'early wakeups' (for still-on-rq
tasks) to be correctly accounted as well.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
'sync' wakeups are a hint towards the scheduler that (certain)
networking related wakeups likely create coupling between tasks.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
split out the affine-wakeup bits.
No code changed:
kernel/sched.o:
text data bss dec hex filename
42521 2858 232 45611 b22b sched.o.before
42521 2858 232 45611 b22b sched.o.after
md5:
9d76738f1272aa82f0b7affd2f51df6b sched.o.before.asm
09b31c44e9aff8666f72773dc433e2df sched.o.after.asm
(the md5's changed because stack slots changed and some registers
get scheduled by gcc in a different order - but otherwise the before
and after assembly is instruction for instruction equivalent.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the channel cannot perform the operation in one call to
->device_prep_dma_zero_sum, then fallback to the xor+page_is_zero path.
This only affects users with arrays larger than 16 devices on iop13xx or
32 devices on iop3xx.
Cc: <stable@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The DMA_INTERRUPT async_tx is a NULL transfer, thus the BCR(count register)
is 0. When the transfer started with a byte count of zero, the DMA
controller will triger a PE(programming error) event and halt, not a normal
interrupt. I add special codes for PE event and DMA_INTERRUPT
async_tx testing.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: update key codes for Apple aluminium
HID: fix comment in hid_input_report()
HID: BADPAD entry for NATSU Playstation USB adapter
HID: Use DIV_ROUND_UP
HID: remove HID_QUIRK_APPLE_ISO_KEYBOARD for 4th generation macbook
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "unexport bio_{,un}map_user"
relay: fix subbuf_splice_actor() adding too many pages
The ps2esdi driver was marked as BROKEN more than two years ago due to being
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/ati_pcigart: fix the PCIGART to use drm_pci to allocate GART table.
drm/radeon: fixup RV550 chip family
drm/via: attempt again to stabilise the AGP DMA command submission.
drm: Fix race that can lockup the kernel
F5 and F6 have no second function printed on them. Thus their definitions have
been removed from the table.
KEY_CYCLEWINDOWS doesn't name the function of Mac OS X' Expose properly and
because we couldn't find a better key code, we decided to use KEY_FN_F4
instead.
We also changed KEY_BACK and KEY_FORWARD, which apply to browser functions, to
KEY_PREVIOUSSONG and KEY_NEXTSONG, since the keys are intended to control a
music player.
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid_input_report() in debug mode of course outputs the report itself, not
the device report descriptor.
Fix this error in comment.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add quirk entry for BADPAD for the NATSU Playstation USB adapter. The
adapter is supported under Linux, but with bad direction detection.
Signed-off-by: Andrew Burton <adb@iinet.net.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
