Commit Graph

80 Commits

Author SHA1 Message Date
Tony Luck
fa2ce64f85 sb_edac: support for Broadwell -EP and -EX
Basic support for the single socket Broadwell-DE processor
was added back in commit 1f39581a9a
   sb_edac: Add support for Broadwell-DE processor
This patch extends Broadwell support to cover the two
socket "-EP" and four socket "-EX" versions of Broadwell.
Only tested on the 2 socket - but this code is largely
cloned from the Haswell path.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-03 10:10:59 -03:00
Tony Luck
7d375bffa5 sb_edac: Fix support for systems with two home agents per socket
First noticed a problem on a 4 socket machine where EDAC only reported
half the DIMMS.  Tracked this down to the code that assumes that systems
with two home agents only have two memory channels on each agent. This
is true on 2 sockect ("-EP") machines. But four socket ("-EX") machines
have four memory channels on each home agent.

The old code would have had problems on two socket systems as it did
a shuffling trick to make the internals of the code think that the
channels from the first agent were '0' and '1', with the second agent
providing '2' and '3'. But the code didn't uniformly convert from
{ha,channel} tuples to this internal representation.

New code always considers up to eight channels.
On a machine with a single home agent these map easily to edac channels
0, 1, 2, 3. On machines with two home agents we map using:
  edac_channel = 4*ha# + channel
So on a -EP machine where each home agent supports only two channels
we'll fill in channels 0, 1, 4, 5, and on a -EX machine we use all of 0,
1, 2, 3, 4, 5, 6, 7.

[mchehab@osg.samsung.com: fold a fixup patch as per Tony's request and fixed
 a few CodingStyle issues]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-03 10:10:52 -03:00
Tony Luck
bb89e7141a sb_edac: Fix a typo and a thinko in address handling for Haswell
typo: "a7mode" chooses whether to use bits {8, 7, 9} or {8, 7, 6}
in the algorithm to spread access between memory resources. But
the non-a7mode path was incorrectly using GET_BITFIELD(addr, 7, 9)
and so picking bits {9, 8, 7}

thinko: BIT(1) of the dram_rule registers chooses whether to just
use the {8, 7, 6} (or {8, 7, 9}) bits mentioned above as they are,
or to XOR them with bits {18, 17, 16} but the code inverted the
test. We need the additional XOR when dram_rule{1} == 0.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-03 10:10:47 -03:00
Borislav Petkov
11249e7399 sb_edac: Fix detection on SNB machines
d0585cd815 ("sb_edac: Claim a different PCI device") changed the
probing of sb_edac to look for PCI device 0x3ca0:

3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00
...

but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA
in sbridge_probe() therefore the probing fails.

Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0),
.i.e., the 14.0 device, fixes the issue and driver loads successfully
again:

[ 2449.013120] EDAC DEBUG: sbridge_init:
[ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0
[ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8
[ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
...

Add a debug printk while at it to be able to catch the failure in the
future and dump driver version on successful load.

Fixes: d0585cd815 ("sb_edac: Claim a different PCI device")
Cc: stable@vger.kernel.org # 3.18
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-09 16:55:26 +01:00
Tony Luck
fec53af531 sb_edac: Fix typo computing number of banks
Code will always think there are 16 banks because of a typo

Reported-by: Misha
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02 16:46:33 -02:00
Tony Luck
1f39581a9a sb_edac: Add support for Broadwell-DE processor
Broadwell-DE is the microserver version of next generation Xeon
processors.  A whole bunch of new PCIe device ids, but otherwise
pretty much the same as Haswell.

Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02 16:46:08 -02:00
Tony Luck
f7cf2a22a2 sb_edac: Fix discovery of top-of-low-memory for Haswell
Haswell moved the TOLM/TOHM registers to a different device and offset.
The sb_edac driver accounted for the change of device, but not for the
new offset.  There was also a typo in the constant to fill in the low
26 bits (was 0x1ffffff, should be 0x3ffffff).

This resulted in a bogus value for the top of low memory:

  EDAC DEBUG: get_memory_layout: TOLM: 0.032 GB (0x0000000001ffffff)

which would result in EDAC refusing to translate addresses for
errors above the bogus value and below 4GB:

   sbridge MC3: HANDLING MCE MEMORY ERROR
   sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
   sbridge MC3: TSC 0
   sbridge MC3: ADDR 2000000
   sbridge MC3: MISC 523eac86
   sbridge MC3: PROCESSOR 0:306f3 TIME 1414600951 SOCKET 0 APIC 0
   MC3: 1 CE Error at TOLM area, on addr 0x02000000 on any memory ( page:0x0 offset:0x0 grain:32 syndrome:0x0)

With the fix we see the correct TOLM value:

   DEBUG: get_memory_layout: TOLM: 2.048 GB (0x000000007fffffff)

and we decode address 2000000 correctly:

   sbridge MC3: HANDLING MCE MEMORY ERROR
   sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
   sbridge MC3: TSC 0
   sbridge MC3: ADDR 2000000
   sbridge MC3: MISC 523e1086
   sbridge MC3: PROCESSOR 0:306f3 TIME 1414601319 SOCKET 0 APIC 0
   DEBUG: get_memory_error_data: SAD interleave package: 0 = CPU socket 0, HA 0, shiftup: 0
   DEBUG: get_memory_error_data: TAD#0: address 0x0000000002000000 < 0x000000007fffffff, socket interleave 1, channel interleave 4 (offset 0x00000000), index 0, base ch: 0, ch mask: 0x01
   DEBUG: get_memory_error_data: RIR#0, limit: 4.095 GB (0x00000000ffffffff), way: 1
   DEBUG: get_memory_error_data: RIR#0: channel address 0x00200000 < 0xffffffff, RIR interleave 0, index 0
   DEBUG: sbridge_mce_output_error:  area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0
   MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x2000 offset:0x0 grain:32 syndrome:0x0 -  area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02 12:06:52 -02:00
Jim Snow
8c00910029 sb_edac: Fix erroneous bytes->gigabytes conversion
Signed-off-by: Jim Snow <jim.snow@intel.com>
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02 12:06:51 -02:00
Andy Lutomirski
d0585cd815 sb_edac: Claim a different PCI device
sb_edac controls a large number of different PCI functions.  Rather
than registering as a normal PCI driver for all of them, it
registers for just one so that it gets probed and, at probe time, it
looks for all the others.

Coincidentally, the device it registers for also contains the SMBUS
registers, so the PCI core will refuse to probe both sb_edac and a
future iMC SMBUS driver.  The drivers don't actually conflict, so
just change sb_edac's device table to probe a different device.

An alternative fix would be to merge the two drivers, but sb_edac
will also refuse to load on non-ECC systems, whereas i2c_imc would
still be useful without ECC.

The only user-visible change should be that sb_edac appears to bind
a different device.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rui Wang <ruiv.wang@gmail.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08 17:04:16 -03:00
Andy Lutomirski
68939df1d7 Move Intel SNB device ids from sb_edac to pci_ids.h
The i2c_imc driver will use two of them, and moving only part of
the list seems messier.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08 17:04:16 -03:00
Seth Jennings
351fc4a99d sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel
Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but
EDAC doesn't know about this and returns and INTERNAL ERROR when the
channel is greater than NUM_CHANNELS:

kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f
kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0
kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4)
kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 -  area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0)

This commit changes sb_edac to forward a channel of -1 to EDAC if the
channel is not specified.  edac_mc_handle_error() sets the channel to -1
internally after the error message anyway, so this commit should have no
effect other than avoiding the INTERNAL ERROR message when the channel
is not specified.

Signed-off-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08 17:04:16 -03:00
Aristeu Rozanski
50d1bb9367 sb_edac: add support for Haswell based systems
Haswell memory controllers are very similar to Ivy Bridge and Sandy Bridge
ones. This patch adds support to Haswell based systems.

[m.chehab@samsung.com: Fix CodingStyle issues]
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:47:01 -03:00
Mauro Carvalho Chehab
c41afdca29 sb_edac: Fix mix tab/spaces alignments
We should not have spaces before ^I on alignments.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:47:00 -03:00
Aristeu Rozanski
adc61bcd91 sb_edac: remove bogus assumption on mc ordering
When a MC is handled, the correct sbridge_dev is searched based on the node,
checking again later with the assumption the first memory controller found is
the first socket's memory controller is a bogus assumption. Get rid of it.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:51 -03:00
Aristeu Rozanski
d7c660b7dc sb_edac: make minimal use of channel_mask
channel_mask will be used in the future to determine which group of memory
modules is causing the errors since when mirroring, lockstep and close page
are enabled you can't. While that doesn't happen, use the channel_mask to
determine the channel instead of relying on the MC event/exception.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:46 -03:00
Aristeu Rozanski
2ff3a308b5 sb_edac: fix socket detection on Ivy Bridge controllers
This patch fixes the obvious bug while handling the socket/HA bitmask used in
Ivy Bridge memory controllers.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:42 -03:00
Aristeu Rozanski
dbc954dddd sb_edac: search devices using product id
This patch changes the way devices are searched by using product id instead of
device/function numbers. Tested in a Sandy Bridge and a Ivy Bridge machine to
make sure everything works properly.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:33 -03:00
Aristeu Rozanski
b976bcf249 sb_edac: make RIR limit retrieval per model
Haswell has a different way to retrieve RIR limits, make this procedure per
model.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:29 -03:00
Aristeu Rozanski
f14d6892e4 sb_edac: make node id retrieval per model
Haswell has a different way to retrieve the node id, make so this procedure
can be reimplemented.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:25 -03:00
Aristeu Rozanski
9e37544615 sb_edac: make memory type detection per memory controller
Haswell has different register, offset to determine memory type and supports
DDR4 in some models. This patch makes it easier to have a different method
depending on the memory controller type.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:23:46 -03:00
Linus Torvalds
3c83e61e67 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93b28 ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb78a9 ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140c1e ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...
2014-04-04 09:50:07 -07:00
Linus Torvalds
4a4389abdd Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull sb_edac patches from Mauro Carvalho Chehab:
 "A couple sb_edac driver improvements, cleaning a little bit the amount
  of data sent to dmesg, and fixing one error message"

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: mark MCE messages as KERN_DEBUG
  sb_edac: use "event" instead of "exception" when MC wasnt signaled
2014-04-03 17:07:17 -07:00
Aristeu Rozanski
49856dc973 sb_edac: mark MCE messages as KERN_DEBUG
Since the driver is decoding the MCE, it's useless to have these
messages printed unless you're debugging a problem in the driver.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13 09:52:09 -03:00
Aristeu Rozanski
cf40f80cbe sb_edac: use "event" instead of "exception" when MC wasnt signaled
Corrected Errors are MC events, not exceptions and reporting as the
later might confuse users.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13 09:52:01 -03:00
Jiang Liu
ec5a0b3824 sb_edac: Degrade log level for device registration
On a system with four Intel processors, it generates too many messages
"EDAC sbridge: Seeking for: dev 1d.3 PCI ID xxxx". And it doesn't give
many useful information for normal users, so change log level from INFO
to DEBUG.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1392613824-11230-1-git-send-email-jiang.liu@linux.intel.com
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-20 11:42:36 +01:00
Mauro Carvalho Chehab
37e59f876b [media, edac] Change my email address
There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-07 08:03:07 -02:00
Linus Torvalds
fab5669d55 Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure
2014-01-20 12:10:27 -08:00
Linus Torvalds
09854dde94 * mpc85xx PCIe error interrupt support
* misc small enhancements/fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3PEWAAoJEBLB8Bhh3lVKziAP/3nNouipUvIcRpL3o8U3jX19
 Z38tD0KPjIIX46rgexjoXbI/bKEy6whE1eDc0CG9GPpOaN9p9WWe81hfBIQc9DYK
 epFNdH3Wk83Ml+3+01CBKfLfiIV25c7rc9IOM7g+nMOg65Z++iC1Cea7i7Ul7T5a
 C+CIDdsmco9VrDBNjHHsrdYVZ1Ufx4NxPb5xhemQAiGCXseBtoD1IDS/gOM1F+aP
 UBDSJobjDrFq5JasEkp83U62VBTDndEcxb6yHROVahIPRn4miroc0NMHJ3XEd1/H
 K9u24iXmHgjjG3Euzd3mq8Axsscz8dUksKQT+lL2YIXz+AM8PcrCDrXK6TiVF9/A
 k5Vj91svnWUDrEU0OF1HysOvn0Z/9Y0+Fwyt6//HMyl/7ehCZBINwxsZ4sc4whtd
 nVHV2Ddcc/LjZzQEAvHuyWdf2pfxi3M1VRhNvuGyWtdHBPf5P8tqVUteoztELPM+
 bKr7wkpvKzKajX6xldNNrVP9xNps8hrYdETjhP5FpUYpF4HKntAe+VJvIue+nOja
 K2AxB25qGHyK5rgh69DkSuatZmImflG4brKWbOE+4La0E8OajrM790YdqP2hRnDQ
 3zpuIRr/htIAy7C2vGbmWITRhxXnGx5FhDI7AQRr1VjvgJprWM5zgIacDuH+5C9K
 ftouZ1hFTDI1WEEMDxRF
 =EJ+3
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 - mpc85xx PCIe error interrupt support
 - misc small enhancements/fixes all over the place.

* tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't try to cancel workqueue when it's never setup
  e752x_edac: Fix pci_dev usage count
  sb_edac: Mark get_mci_for_node_id as static
  EDAC: Mark edac_create_debug_nodes as static
  amd64_edac: Remove "amd64" prefix from static functions
  amd64_edac: Simplify code around decode_bus_error
  amd64_edac: Mark amd64_decode_bus_error as static
  EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
  amd64_edac: Fix condition to verify max channels allowed for F15 M30h
  edac/85xx: Add PCIe error interrupt edac support
2014-01-20 09:26:15 -08:00
Ingo Molnar
014952270e * Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which, if
 done properly in the BIOS, makes a corresponding EDAC module redundant,
 from Gong Chen.
 
 * PCIe AER tracepoint severity levels fix, from Rui Wang.
 
 * Error path correction for the mce device init, from Levente Kurusa.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSrCysAAoJEBLB8Bhh3lVK1ikP/0hKY1Kk4tjbSta9A9Z8LdQG
 9F5JzEny47DpTrLaKij7MqAlbYFO8sSm7Zw0CEztTF7Ou/H37GAuxhMlB8ECMGOm
 Dzu53X1rySTna9mB+1gyXXd+pJypp/oe18/o16rw1QKjI9o2Kfgwfj7lKvytR549
 kDM1dhxEImQIS5cpJPkOPbcpVlSqYN7BnK9/Qx3h0W70httT/8qrr9xVtVL7wjOT
 auTA0R5/TkV06FtxyfHUNULEWTSP+2yNP/iJbusR6f4Jk1j0XmyCFr0BYOkPA1UO
 9+wC9+2R+r7rJw8MBfMzNmPrRzDJHdaiHPwYqse05yewRHfRHe5cgZWJYbL8Qv0u
 2WOX+fY12EfDYlihcOYtlupRzhGfGKRsaRpSuG1zX87ctDxAfNZencv4hnaJvfqG
 Xk6ggIX6tHKEivO2gmaPsmhoKveh0zcozUs+wgh/tvV5QB6ioFCjzHfSEsix5+BH
 ryyg1ri7IZnh92g3UuSUpE0OCbAquMfI7XIJo+kFs0u79dZTL/kD3wVu6oYazwdy
 yTrvIq7Bq5cMWnnni5w7dIU09ef2uvDgyHyAS6+RiqaQxhYFsW8/yx2zJrIloWRs
 7txz6t3CVmWFiejIg2gw6KyjaG6pXRBkDkI1XU6T+bKLb31ojx2+i9UKIIUeRZTB
 iisWAOI6ZSdt4eAkgeaI
 =r//I
 -----END PGP SIGNATURE-----

Merge tag 'ras_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras

Pull RAS updates from Borislav Petkov:

  * Add the functionality to override error reporting agents as some
  machines are sporting a new extended error logging capability which, if
  done properly in the BIOS, makes a corresponding EDAC module redundant,
  from Gong Chen.

  * PCIe AER tracepoint severity levels fix, from Rui Wang.

  * Error path correction for the mce device init, from Levente Kurusa.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-16 14:33:17 +01:00
Rashika Kheria
8112c0cdf7 sb_edac: Mark get_mci_for_node_id as static
This patch marks the function get_mci_for_node_id() as static because it
is not used outside of sb_edac.c.

Thus, it also eliminates the following warning:
drivers/edac/sb_edac.c:918:22: warning: no previous prototype for ‘get_mci_for_node_id’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/0441f508186fc4eeabc8e9c3e4dde013d99405d4.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15 18:02:13 +01:00
Chen, Gong
fd52103966 EDAC, sb_edac: Modify H/W event reporting policy
Newer Intel platforms support more than one method to report H/W event.
On this kind of platform, H/W event report can adopt new method and
traditional EDAC method should be disabled. Moreover, if EDAC event
report method is set to *force*, it means event must be reported via
EDAC interface. IOW, it overrides the default event report policy.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1386310630-12529-3-git-send-email-gong.chen@linux.intel.com
[ Boris: massage commit and error messages ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-11 18:19:25 +01:00
Jingoo Han
ba935f4097 EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
Currently, there is no other bus that has something like this macro for
their device ids. Thus, DEFINE_PCI_DEVICE_TABLE macro should be removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Link: http://lkml.kernel.org/r/001c01ceefb3$5724d860$056e8920$%han@samsung.com
[ Boris: swap commit message with better one. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-06 10:23:41 +01:00
Aristeu Rozanski
bd4b968362 sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled
Fix this:

In file included from drivers/edac/sb_edac.c:27:0:
drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’:
drivers/edac/edac_core.h:50:8: warning: ‘limit’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  printk(level "EDAC " prefix ": " fmt, ##arg)
        ^
drivers/edac/sb_edac.c:948:25: note: ‘limit’ was declared here
  u64   ch_addr, offset, limit, prv = 0;

Limit can be initialized to 0. The only way limit wouldn't be
initialized is if there are no DIMMs present (which would be a bug of
course) and it'd fail on the next test.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Link: http://lkml.kernel.org/r/20131121122021.GD26009@pd.tnic
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-30 12:26:36 +01:00
Linus Torvalds
cdd278db0e Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC driver updates from Mauro Carvalho Chehab:
 - sb_edac: add support for Ivy Bridge support
 - cell_edac: add a missing of_node_put() call

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  cell_edac: fix missing of_node_put
  sb_edac: add support for Ivy Bridge
  sb_edac: avoid decoding the same error multiple times
  sb_edac: rename mci_bind_devs()
  sb_edac: enable multiple PCI id tables to be used
  sb_edac: rework sad_pkg
  sb_edac: allow different interleave lists
  sb_edac: allow different dram_rule arrays
  sb_edac: isolate TOHM retrieval
  sb_edac: rename pci_br
  sb_edac: isolate TOLM retrieval
  sb_edac: make RANK_CFG_A value part of sbridge_info
2013-11-18 14:51:52 -08:00
Aristeu Rozanski
4d715a805b sb_edac: add support for Ivy Bridge
Since Ivy Bridge memory controller is very similar to Sandy Bridge, it's
wiser to modify sb_edac to support both instead of creating another
driver.

[m.chehab@samsung.com: Fix CodingStyle]
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 17:13:22 -02:00
Aristeu Rozanski
be3036d220 sb_edac: avoid decoding the same error multiple times
Whenever the extended error reporting is active, multiple MCEs will be
generated for the same event, which will lead to multiple repeated
errors to be reported. So check ADDRV and only decode the error if the
MCE address is valid.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:50:03 -02:00
Aristeu Rozanski
ea779b5a09 sb_edac: rename mci_bind_devs()
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:49:47 -02:00
Aristeu Rozanski
5153a0f94c sb_edac: enable multiple PCI id tables to be used
This is needed to allow separated PCI id tables for Sandy Bridge and Ivy
Bridge.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:49:27 -02:00
Aristeu Rozanski
cc311991a7 sb_edac: rework sad_pkg
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:49:04 -02:00
Aristeu Rozanski
ef1ce51e7b sb_edac: allow different interleave lists
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:48:42 -02:00
Aristeu Rozanski
464f1d829a sb_edac: allow different dram_rule arrays
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:48:16 -02:00
Aristeu Rozanski
8fd6a43ac9 sb_edac: isolate TOHM retrieval
This is preparation of Ivy Bridge support.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:43:17 -02:00
Aristeu Rozanski
5f8a1b8a7b sb_edac: rename pci_br
Ivy Bridge has more than one, so rename pci_br to pci_br0

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:43:06 -02:00
Aristeu Rozanski
fb79a50926 sb_edac: isolate TOLM retrieval
This is in preparation for the Ivy Bridge support.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:25:27 -02:00
Aristeu Rozanski
ef1e8d03b1 sb_edac: make RANK_CFG_A value part of sbridge_info
This is in preparation of Ivy Bridge support.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:20:37 -02:00
Chen, Gong
10ef6b0dff bitops: Introduce a more generic BITMASK macro
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-21 15:12:01 -07:00
Luck, Tony
de4772c621 edac: sb_edac.c should not require prescence of IMC_DDRIO device
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR
space to determine the type of DIMMs (registered or unregistered).
But this device does not exist on some single socket Sandy Bridge
servers.  While the type of DIMMs is nice to know, it is not essential
for this driver's other functions. So it seems harsh to have it
refuse to load at all when it cannot find this device.

Make the check for this device be optional. If it isn't present
just report the memory type as "MEM_UNKNOWN".

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29 10:32:40 -03:00
Mauro Carvalho Chehab
1339730e73 Linux 3.8-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
 GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
 E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
 Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
 EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
 ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
 =jjBc
 -----END PGP SIGNATURE-----

Merge tag 'v3.8-rc7' into next

Linux 3.8-rc7

* tag 'v3.8-rc7': (12052 commits)
  Linux 3.8-rc7
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
  virtio_console: Don't access uninitialized data.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  ...
2013-02-20 15:45:52 -03:00
Greg Kroah-Hartman
9b3c6e85c2 Drivers: edac: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00
Mauro Carvalho Chehab
da14d93d95 sb_edac: add a missing /n on a debug message
[   17.024963] EDAC DEBUG: get_memory_layout: TOHM: 132.160 GB (0x0000002043ffffff)<7>[   17.024971] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 33.792 GB (0x0000000840000000) Interleave: 8:6 reg=0x000083c3

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21 08:01:18 -02:00