Commit Graph

137 Commits

Author SHA1 Message Date
Eric Dumazet
725b13685c perf tools: Dont use openat()
openat() is still a young glibc facility, better to not use it in a
non performance critical program (perf list)

Many machines have older glibc (RHEL 4 Update 5 -> glibc-2.3.4-2.36
on my dev machine for example).

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@redhat.com>
LKML-Reference: <4ABB767D.6080004@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24 21:20:08 +02:00
Eric Dumazet
a255a9981a perf tools: Fix buffer allocation
"perf top" cores dump on my dev machine, if run from a directory
where vmlinux is present:

  *** glibc detected *** malloc(): memory corruption: 0x085670d0 ***

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <4ABB6EB7.7000002@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24 15:11:23 +02:00
Mike Galbraith
dd906a0fe8 perf tools: Handle relative paths while loading module symbols
Inform util/module.c::mod_dso__load_module_paths() that relative
paths do exist in some modules.dep, and make it fail noisily should
it encounter a path that it doesn't understand, or a module it
cannot open.

Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: rostedt@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1253779628.10513.8.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24 11:40:35 +02:00
Mike Galbraith
508c4d0874 perf tools: Fix module symbol loading bug
Avi Kivity reported 'perf annotate' failures with modules, the
requested function was not annotated.

If there are no modules currently loaded, or the last module
scanned is not loaded, dso__load_modules() steps on the value from
dso__load_vmlinux(), so we happily load the kallsyms symbols on top
of what we've already loaded.

Fix that such that the total count of symbols loaded is returned.
Should module symbol load fail after parsing of vmlinux, is's a
hard failure, so do not silently fall-back to kallsyms.

Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: rostedt@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1253697658.11461.36.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-23 13:45:48 +02:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Arjan van de Ven
611a546bec perf util: SVG performance improvements
Tweak the output SVG to increase performance in SVG viewers by
limiting the different types of font sizes and by smarter
transformations on the text.

At least with Inkscape this gives a notable performance improvement
during zoom and scrolling.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181438.3a49cb93@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20 19:37:36 +02:00
Arjan van de Ven
5094b65545 perf util: Make the timechart SVG width dynamic
This patch adds a command line option for timechart that allows the
user to specify the width of the SVG file.

This patch also makes sure that each second of recording has at
least 200 units (pixels at 96 DPI) of width.  This impacts
recordings longer than 5 seconds; recordings shorter than 5 second
will scale up to have a width of 1000 units for the whole recording
(as before).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181416.69570c5d@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20 19:37:35 +02:00
Arjan van de Ven
a92fe7b306 perf timechart: Show the duration of scheduler delays in the SVG
Given that scheduler latencies are the hot thing nowadays, show the
duration of said latencies in the SVG in text form.

In addition, if the latency is more than 10 msec, pick a brighter
yellow color as a way to point these long delays out.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181353.796f4509@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20 19:37:35 +02:00
Arjan van de Ven
4f1202c8e6 perf timechart: Show the name of the waker/wakee in timechart
Timechart currently shows thin green lines for sending or receiving
wakeups. This patch also prints (in a very small font) the name of
the process that is being woken/wakes up this process.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181328.68baa978@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20 19:37:34 +02:00
Arjan van de Ven
ec60a3fe47 perf utils: Use a define for the maximum length of a trace event
As per Ingo's review: use a #define rather than an open coded constant
for the maximum length of a trace event for storing in the perf.data file.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090919133630.10533d3e@infradead.org>
[ add a few comments to nearby functions ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 18:57:53 +02:00
Arjan van de Ven
964a0b3d2b perf utils: Be consistent about minimum text size in the svghelper
Be more consistent in the svghelper about the minimum text size
by having a global #define for this.

There needs to be a minimum text size in order to keep the size
of the SVG file within the reach of what current SVG viewers can
cope with.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090919133507.7374ef8b@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 18:57:52 +02:00
Arjan van de Ven
f48d55ce78 perf: Add a SVG helper library file
The timechart tool writes out SVG format output; this patch adds a
set of helper functions to abstract dealing with SVG from the core
timechart code.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130613.677f0516@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 11:42:13 +02:00
Arjan van de Ven
fd39e055c4 perf: Add a sample_event type to the event_union
Add a sample_event type to the event_union so that raw samples can
be processed easily.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130511.411434b5@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 11:42:12 +02:00
Arjan van de Ven
a79d7db9fd perf: Allow perf utilities to have "callback" options without arguments
timechart needs to add a "callback" type command line argument that
does not take arguments.

This patch adds the parse-options.h infrastructure to make this
possible.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130440.548666c1@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 11:42:11 +02:00
Arjan van de Ven
8755a8f27a perf: Store trace event name/id pairs in perf.data
The trace event name<->id mapping is dynamic for each kernel
compile. In order for perf.data to be useable outside the actual
system, we thus need to store a table of this mapping for later
use.

This patch adds this table to perf.data, and provides helper
functions for lookup up fields from this table.

To avoid mistakes, lookup-from-table is kept completely seprate
from lookup-from-local-debugfs.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130405.6960d099@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 11:42:11 +02:00
Arjan van de Ven
393b2ad8c7 perf: Add a timestamp to fork events
perf timechart needs to know when a process forked, in order to be
able to visualize properly when tasks start.

This patch adds a time field to the event structure, and fills it
in appropriately.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130341.51ad2de2@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 11:42:10 +02:00
Li Zefan
1281a49b7a perf trace: Sample timestamp and cpu when using record flag
Sample timestamp and cpu just like the -R option.

Before:
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=1 handler=i8042
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=1 handler=i8042

After:
            init-0     [001]  7364.568965353: irq_handler_entry: irq=18 handler=eth0
            init-0     [001]  7365.530226877: irq_handler_entry: irq=1 handler=i8042
            init-0     [001]  7365.542831563: irq_handler_entry: irq=18 handler=eth0
            init-0     [001]  7365.644156299: irq_handler_entry: irq=18 handler=eth0
            init-0     [001]  7365.694556201: irq_handler_entry: irq=18 handler=eth0

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F827.8040905@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:30:25 +02:00
Li Zefan
270bbbe80d perf tools: Increase MAX_EVENT_LENGTH
The name length of some trace events is longer than 30, like
sys_enter_sched_get_priority_max and
ext4_mb_discard_preallocations.

Passing those events to perf-record will fail, try:

  # ./perf record -f -e syscalls:sys_enter_sched_get_priority_max -F 1 -a

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F4AB.7050205@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:30:25 +02:00
Li Zefan
6706ccf8e7 perf tools: Fix memory leak in read_ftrace_printk()
get_tracing_file() should be paired with put_tracing_file().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F48F.4070807@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:30:24 +02:00
Ingo Molnar
0ec04e16d0 perf sched: Add 'perf sched map' scheduling event map printout
This prints a textual context-switching outline of workload
captured via perf sched record.

For example, on a 16 CPU box it outputs:

   N1  O1  .   .   .   S1  .   .   .   B0  .  *I0  C1  .   M1  .    23002.773423 secs
   N1  O1  .  *Q0  .   S1  .   .   .   B0  .   I0  C1  .   M1  .    23002.773423 secs
   N1  O1  .   Q0  .   S1  .   .   .   B0  .  *R1  C1  .   M1  .    23002.773485 secs
   N1  O1  .   Q0  .   S1  .  *S0  .   B0  .   R1  C1  .   M1  .    23002.773478 secs
  *L0  O1  .   Q0  .   S1  .   S0  .   B0  .   R1  C1  .   M1  .    23002.773523 secs
   L0  O1  .  *.   .   S1  .   S0  .   B0  .   R1  C1  .   M1  .    23002.773531 secs
   L0  O1  .   .   .   S1  .   S0  .   B0  .   R1  C1 *T1  M1  .    23002.773547 secs T1 => irqbalance:2089
   L0  O1  .   .   .   S1  .   S0  .  *P0  .   R1  C1  T1  M1  .    23002.773549 secs
  *N1  O1  .   .   .   S1  .   S0  .   P0  .   R1  C1  T1  M1  .    23002.773566 secs
   N1  O1  .   .   .  *J0  .   S0  .   P0  .   R1  C1  T1  M1  .    23002.773571 secs
   N1  O1  .   .   .   J0  .   S0 *B0  P0  .   R1  C1  T1  M1  .    23002.773592 secs
   N1  O1  .   .   .   J0  .  *U0  B0  P0  .   R1  C1  T1  M1  .    23002.773582 secs
   N1  O1  .   .   .  *S1  .   U0  B0  P0  .   R1  C1  T1  M1  .    23002.773604 secs
   N1  O1  .   .   .   S1  .   U0  B0 *.   .   R1  C1  T1  M1  .    23002.773615 secs
   N1  O1  .   .   .   S1  .   U0  B0  .   .  *K0  C1  T1  M1  .    23002.773631 secs
   N1  O1  .  *M0  .   S1  .   U0  B0  .   .   K0  C1  T1  M1  .    23002.773624 secs
   N1  O1  .   M0  .   S1  .   U0 *.   .   .   K0  C1  T1  M1  .    23002.773644 secs
   N1  O1  .   M0  .   S1  .   U0  .   .   .  *R1  C1  T1  M1  .    23002.773662 secs
   N1  O1  .   M0  .   S1  .  *.   .   .   .   R1  C1  T1  M1  .    23002.773648 secs
   N1  O1  .  *.   .   S1  .   .   .   .   .   R1  C1  T1  M1  .    23002.773680 secs
   N1  O1  .   .   .  *L0  .   .   .   .   .   R1  C1  T1  M1  .    23002.773717 secs
  *N0  O1  .   .   .   L0  .   .   .   .   .   R1  C1  T1  M1  .    23002.773709 secs
  *N1  O1  .   .   .   L0  .   .   .   .   .   R1  C1  T1  M1  .    23002.773747 secs

Columns stand for individual CPUs, from CPU0 to CPU15, and the
two-letter shortcuts stand for tasks that are running on a CPU.

'*' denotes the CPU that had the event.

A dot signals an idle CPU.

New tasks are assigned new two-letter shortcuts - when they occur
first they are printed. In the above example 'T1' stood for irqbalance:

      T1 => irqbalance:2089

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 16:41:30 +02:00
Ingo Molnar
80ed0987f3 perf sched: Make idle thread and comm/pid names more consistent
Peter noticed that we have 3 ways of referring to the idle thread:

 [idle]:0
 swapper:0
 swapper-0

Standardize on 'swapper:0'.

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 12:15:47 +02:00
Ingo Molnar
dc02bf7178 perf sched: Account for lost events, increase default buffering
Output such lost event and state machine weirdness stats:

   TOTAL:                |  14974.910 ms |    46384 |
  ---------------------------------------------------
   INFO: 8.865% lost events (19132 out of 215819, in 8 chunks)
   INFO: 0.198% state machine bugs (49 out of 24708) (due to lost events?)

And increase buffering to -m 1024 (4 MB) by default. Since we
use output multiplexing that kind of space is needed.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 11:48:05 +02:00
Ingo Molnar
ea57c4f520 perf tools: Implement counter output multiplexing
Finish the -M/--multiplex option implementation:

 - separate it out from group_fd

 - correctly set it via the ioctl and dont mmap counters that
   are multiplexed

 - modify the perf record event loop to deal with buffer-less
   counters.

 - remove the -g option from perf sched record

 - account for unordered events in perf sched latency

 - (add -f to perf sched record to ease measurements)

 - skip idle threads (pid==0) in latency output

The result is better latency output by 'perf sched latency':

 -----------------------------------------------------------------------------------
  Task              |  Runtime ms | Switches | Average delay ms | Maximum delay ms |
 -----------------------------------------------------------------------------------
  ksoftirqd/8       |    0.071 ms |        2 | avg:    0.458 ms | max:    0.913 ms |
  at-spi-registry   |    0.609 ms |       19 | avg:    0.013 ms | max:    0.023 ms |
  perf              |    3.316 ms |       16 | avg:    0.013 ms | max:    0.054 ms |
  Xorg              |    0.392 ms |       19 | avg:    0.011 ms | max:    0.018 ms |
  sleep             |    0.537 ms |        2 | avg:    0.009 ms | max:    0.009 ms |
 -----------------------------------------------------------------------------------
  TOTAL:            |    4.925 ms |       58 |
 ---------------------------------------------

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 15:45:11 +02:00
Ingo Molnar
1fc35b29b4 perf sched: Implement the 'perf sched record' subcommand
Implement the 'perf sched record' subcommand that adds a
default list of events, turns on raw sampling and system-wide
tracing and passes off the rest of the command to perf record.

This is more convenient than having to specify the events all
the time.

Before:

 $ perf record -a -R -e sched:sched_switch:r -e sched:sched_stat_wait:r -e sched:sched_stat_sleep:r -e sched:sched_stat_iowait:r -e sched:sched_process_exit:r -e sched:sched_process_fork:r -e sched:sched_wakeup:r -e sched:sched_migrate_task:r -c 1 sleep 1

After:

 $ perf sched record -f sleep 1

Also fix an assumption in the event string parser that assumed
that strings passed in can be modified. (In this case they wont
be as they come from a readonly constant section.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:51 +02:00
Ingo Molnar
b5fae128e4 perf sched: Clean up PID sorting logic
Use a sort list for thread atoms insertion as well - instead of
hardcoded for PID.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:50 +02:00
Ingo Molnar
d9340c1db3 perf sched: Display time in milliseconds, reorganize output
After:

-----------------------------------------------------------------------------------
 Task              |  runtime ms | switches | average delay ms | maximum delay ms |
-----------------------------------------------------------------------------------
 migration/0       |    0.000 ms |        1 | avg:    0.047 ms | max:    0.047 ms |
 ksoftirqd/0       |    0.000 ms |        1 | avg:    0.039 ms | max:    0.039 ms |
 migration/1       |    0.000 ms |        3 | avg:    0.013 ms | max:    0.016 ms |
 migration/3       |    0.000 ms |        2 | avg:    0.003 ms | max:    0.004 ms |
 migration/4       |    0.000 ms |        1 | avg:    0.022 ms | max:    0.022 ms |
 distccd           |    0.000 ms |        1 | avg:    0.004 ms | max:    0.004 ms |
 distccd           |    0.000 ms |        1 | avg:    0.014 ms | max:    0.014 ms |
 distccd           |    0.000 ms |        2 | avg:    0.000 ms | max:    0.000 ms |
 distccd           |    0.000 ms |        2 | avg:    0.012 ms | max:    0.019 ms |
 distccd           |    0.000 ms |        1 | avg:    0.002 ms | max:    0.002 ms |
 as                |    0.000 ms |        2 | avg:    0.019 ms | max:    0.019 ms |
 as                |    0.000 ms |        3 | avg:    0.015 ms | max:    0.017 ms |
 as                |    0.000 ms |        1 | avg:    0.009 ms | max:    0.009 ms |
 perf              |    0.000 ms |        1 | avg:    0.001 ms | max:    0.001 ms |
 gcc               |    0.000 ms |        1 | avg:    0.021 ms | max:    0.021 ms |
 run-mozilla.sh    |    0.000 ms |        2 | avg:    0.010 ms | max:    0.017 ms |
 mozilla-plugin-   |    0.000 ms |        1 | avg:    0.006 ms | max:    0.006 ms |
 gcc               |    0.000 ms |        2 | avg:    0.013 ms | max:    0.013 ms |
-----------------------------------------------------------------------------------

(The runtime ms column is not filled in yet.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:44 +02:00
Frederic Weisbecker
4653881802 perf sched: Fix bad event alignment
perf sched raises the following error when it meets a sched
switch event:

perf: builtin-sched.c:286: register_pid: Assertion `!(pid >= 65536)' failed.
Abandon

Currently in x86-64, the sched switch events have a hole in the
middle of the structure:

	u16 common_type;
	u8 common_flags;
	u8 common_preempt_count;
	u32 common_pid;
	u32 common_tgid;

	char prev_comm[16];
	u32 prev_pid;
	u32 prev_prio;
			<--- there
	u64 prev_state;
	char next_comm[16];
	u32 next_pid;
	u32 next_prio;

Gcc inserts a 4 bytes hole there for prev_state to be u64
aligned. And the events are exported to userspace with this
hole.

But in userspace, from perf sched, we fetch it using a
structure that has a new field in the beginning: u32 size. This
is because our trace is exported with its size as a field. But
now that we have this new field, the hole in the middle
disappears because it makes prev_state becoming well aligned.

And since we are using a pointer to the raw trace using this
struct, instead of reading prev_state, we are reading the hole.

We could fix it by keeping the size seperate from the struct
but actually there a lot of other potential problems: some
fields may be saved as long in a 64 bits system and later read
as long in a 32 bits system. Also this direct cast doesn't care
about the endianness differences between the host traced
machine and the machine in which we do the post processing.

So instead of using such dangerous direct casts, fetch the
values using the trace parsing API that already takes care of
all these problems.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:41 +02:00
Frederic Weisbecker
bcd3279f46 perf tools: Allow the specification of all tracepoints at once
Currently, when one wants to activate every tracepoint
counters of a subsystem from perf record, the current sequence
is needed:

  perf record -e subsys:ev1 -e subsys:ev2 -e subsys:ev3

This may annoy the most patient of us.

Now we can just do:

  perf record -e subsys:*

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:40 +02:00
Ingo Molnar
ec156764d4 perf sched: Import schedbench.c
Import the schedbench.c tool that i wrote some time ago to
simulate scheduler behavior but never finished. It's a good
basis for perf sched nevertheless.

Most of its guts are not hooked up to the perf event loop
yet - that will be done in the patches to come.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:37 +02:00
Linus Torvalds
483e3cd6a3 Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...
2009-09-11 13:24:03 -07:00
Ingo Molnar
ed011b22ce Merge commit 'v2.6.31-rc9' into tracing/core
Merge reason: move from -rc5 to -rc9.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-06 06:11:42 +02:00
Ulrich Drepper
6b58e7f146 perf tools: Avoid unnecessary work in directory lookups
This patch improves some (common) inefficiencies in the
handling of directory lookups:

- not using the d_type information returned by the kernel

- constructing (absolute) paths for file operation even though
  directory-relative operations using the *at functions is
  possible

There are more places to fix but this is a start.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090904193951.GB6186@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 21:50:17 +02:00
Ingo Molnar
6f4596d931 perf trace: Fix read_string()
We did not account for the enclosing \0. Depending on what malloc()
gave us this resulted in corrupted version string printouts.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03 16:22:45 +02:00
Ingo Molnar
00fc97863c perf trace: Print out in nanoseconds
Print out more accurate timestamps - usecs does not cut it
anymore on fast enough boxes ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03 16:22:02 +02:00
Ingo Molnar
2e01d17911 perf tools: Seek to the end of the header area
Leave the input fd at the data area.

It does not matter right now - but seeking at the end of it
certainly did not make sense.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03 16:21:11 +02:00
Ingo Molnar
65014ab361 perf tools: Work around strict aliasing related warnings
Older versions of GCC are rather stupid about strict aliasing:

  util/trace-event-parse.c: In function 'parse_cmdlines':
  util/trace-event-parse.c:93: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c: In function 'parse_proc_kallsyms':
  util/trace-event-parse.c:155: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c:157: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c:158: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c: In function 'parse_ftrace_printk':
  util/trace-event-parse.c:294: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c:295: warning: dereferencing type-punned pointer will break strict-aliasing rules
  make: *** [util/trace-event-parse.o] Error 1

Make it clear to GCC that we intend with those pointers, by passing
them through via an explicit (void *) cast.

We might want to add -fno-strict-aliasing as well, like the kernel
itself does.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-02 14:56:33 +02:00
Frederic Weisbecker
561f732c12 perf tools: Complete support for dynamic strings
Complete support for __str_loc type strings of ftrace events
which have dynamic offsets values set for each of them inside
their sammples.

Before:
        geany-5759  [000]     0.000000: lock_release: name
        geany-5759  [000]     0.000000: lock_release: name
        geany-5759  [000]     0.000000: lock_release: name
  kondemand/0-362   [000]     0.000000: lock_release: name
      pdflush-421   [000]     0.000000: lock_release: name

After:
        geany-5759  [000]     0.000000: lock_release: &u->lock
        geany-5759  [000]     0.000000: lock_release: key
        geany-5759  [000]     0.000000: lock_release: &group->notification_mutex
  kondemand/0-362   [000]     0.000000: lock_release: &rq->lock
      pdflush-421   [000]     0.000000: lock_release: &rq->lock

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251693921-6579-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2009-08-31 10:04:49 +02:00
Frederic Weisbecker
9b8055a52c perf tools: Unify swapper tasks naming
In perf tools, we hardcode the pid 0 cmdline resolving to
"idle" because the init task is not included in the COMM
events.

But the idle tasks secondary cpus are resolved into their
"init" name through the COMM events.

We have then such strange result in perf report (ditto with
trace):

    19.66%       init    [kernel]          [k] acpi_idle_enter_c1
    17.32%       [idle]  [kernel]          [k] acpi_idle_enter_c1

It's then better to unify the swapper tasks into a single init
name.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2009-08-31 10:04:49 +02:00
Frederic Weisbecker
5b447a6a13 perf tools: Librarize idle thread registration
Librarize register_idle_thread() used by annotate and report.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31 10:04:48 +02:00
Ingo Molnar
19c959627a Merge branch 'perfcounters/tracing' into perfcounters/core
Merge reason: this topic is ready now to merge into the main
              development branch for .32, with functional
              perf trace output.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31 10:03:27 +02:00
Frederic Weisbecker
d498bc1f62 perf tools: Fix missing string field printing in perf trace
Some string fields are not printed because of a missing printf
in the post-processing.

Before:
	    perf-10070 [000]     0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120]
            perf-10070 [000]     0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120]
          <idle>-0     [000]     0.000000: sched_switch: task :0 [140] (R) ==> :361 [115]

After:
	    perf-10070 [000]     0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120]
            perf-10070 [000]     0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120]
          <idle>-0     [000]     0.000000: sched_switch: task swapper:0 [140] (R) ==> kondemand/1:361 [115]

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251427567-10551-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28 07:58:11 +02:00
Frederic Weisbecker
1ef2ed1066 perf tools: Only save the event formats we need
While opening a trace event counter, every events are saved in
the trace.info file. But we only want to save the
specifications of the events we are using.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28 07:58:11 +02:00
Frederic Weisbecker
6e086437f3 perf tools: Save partial non-overlapping map
The librarization of the thread helpers between annotate and
report lost some perf report specifics.

thread__insert_map() had its most uptodate version in perf
report which cared about partial map overlapping. In case of
overlap between two maps, perf annotate's version removes the
whole old map without considering if it partially or
absolutely overlaps the new map.

We exported the odd version, change it by using the perf
report version.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250607843-7395-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18 17:18:03 +02:00
Ingo Molnar
1f18345bdf perf tools: Remove obsolete defines
The _XOPEN_SOURCE* defines are not really needed on Linux and
it's not like we'll port this to AIX ;-)

The define also broke the build with gcc 4.4.1:

 CC util/trace-event-parse.o
 In file included from util/trace-event-parse.c:32:
 util/util.h:43:1: error: "_XOPEN_SOURCE" redefined

So remove them.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18 11:00:05 +02:00
Frederic Weisbecker
3f9edc2382 perf tools: Make trace event format parser aware of cast to pointers
The ftrace event format parser handles the usual casts but not
the cast to pointers. Such casts have been introduced recently
with the module trace events and raise the following parsing
error:

	Fatal: bad op token )

This is because it considers the "*" character as a binary
operator. Make it then aware of casts to pointers.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18 00:00:19 +02:00
Frederic Weisbecker
5f9c39dca5 perf tools: Add perf trace
This adds perf trace into the set of perf tools.

It is written to fetch the tracepoint samples from perf events
and display them, according to the events information given by
the debugfs files through the util/trace* tools.

It is a rough first shot and doesn't yet handle the cpu,
timestamps fields and some other things.

Example:

 perf record -f -e workqueue:workqueue_execution:record -F 1 -a
 perf trace

       kblockd/0-236   [000]     0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0
     kondemand/0-360   [000]     0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0
     kondemand/0-360   [000]     0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0

Todo:

- A lot of things!

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 16:32:39 +02:00
Steven Rostedt
ea4010d136 perf tools: Add trace event information parser
Add util/trace-event-parse.c which provides the handlers to
parse the ftrace events info from the stream and handles the
ftrace perf samples event printing.

This file is a rename of the parse-events.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

This is a perf tools integration.

[ fweisbec@gmail.com: various changes for perf tools
                      integration. ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 16:32:39 +02:00
Steven Rostedt
538bafb5cc perf tools: Add trace event debugfs stream reader
Add util/trace-event-read.c which handles trace events
informations reading.

This file is a rename of the trace-read.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:

   git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

This is its perf tools integration.

[ fweisbec@gmail.com: various changes for perf tools
                      integration. ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 16:32:38 +02:00
Steven Rostedt
5205094364 perf tools: Add trace event debugfs IO handler
Add util/trace-event-info.c which handles ftrace file IO from
debugfs and provides general helpers to fetch/save ftrace
events informations.

This file is a rename of the trace-cmd.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

This is a perf tools integration.

For now, ftrace events information is saved in a separate file
than the standard perf.data

[fweisbec@gmail.com: various changes for perf tools integration]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 16:32:38 +02:00
Frederic Weisbecker
8f28827a16 perf tools: Librarize trace_event() helper
Librarize trace_event() helper so that perf trace can use it
too. Also clean up the debug.h includes a bit.

It's not good to have it included in perf.h because it doesn't
make it flexible against other headers it may need (headers
that can also depend on perf.h and then create a recursive
header dependency).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16 23:06:45 +02:00