Commit Graph

11 Commits

Author SHA1 Message Date
Vegard Nossum
77ef50a522 x86: consolidate header guards
This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2008-07-22 21:31:34 +02:00
Mike Travis
3461b0af02 x86: remove static boot_cpu_pda array v2
* Remove the boot_cpu_pda array and pointer table from the data section.
    Allocate the pointer table and array during init.  do_boot_cpu()
    will reallocate the pda in node local memory and if the cpu is being
    brought up before the bootmem array is released (after_bootmem = 0),
    then it will free the initial pda.  This will happen for all cpus
    present at system startup.

    This removes 512k + 32k bytes from the data section.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-08 11:31:25 +02:00
Mike Travis
7891a24e1e x86: restore pda nodenumber field
* Restore the nodenumber field in the x86_64 pda.  This field is slightly
    different than the x86_cpu_to_node_map mainly because it's a static
    indication of which node the cpu is on while the cpu to node map is a
    dyanamic mapping that may get reset if the cpu goes offline.  This also
    simplifies the numa_node_id() macro.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-08 11:31:23 +02:00
Joe Perches
46e1abc63e include/asm-x86/pda.h: checkpatch cleanups - formatting only
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:26 +02:00
Yinghai Lu
04adf11435 x86: remove never used nodenumer in pda
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:47 +02:00
Cyrill Gorcunov
fe758fb119 x86: clean up include/asm-x86/pda.h
clean up include/asm-x86/pda.h, as suggested by checkpatch.pl.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:25 +01:00
Jan Beulich
d88879b2d0 x86-64: make pda's cpunumber and nodenumber unsigned
This generally allows better code to be generated, since the zero-
extension during 32-bit operations comes for free (needed when the
result is used as array index or similar), whereas sign extension must
be done explicitly and frequently requires a one byte larger
instruction due to the necessary rex64 prefix.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:21 +01:00
Thomas Gleixner
40fec50ac4 x86: move pda related declaration
pda has its own header file as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:18 +01:00
Joe Korty
38e760a133 x86: expand /proc/interrupts to include missing vectors, v2
Add missing IRQs and IRQ descriptions to /proc/interrupts.

/proc/interrupts is most useful when it displays every IRQ vector in use by
the system, not just those somebody thought would be interesting.

This patch inserts the following vector displays to the i386 and x86_64
platforms, as appropriate:

	rescheduling interrupts
	TLB flush interrupts
	function call interrupts
	thermal event interrupts
	threshold interrupts
	spurious interrupts

A threshold interrupt occurs when ECC memory correction is occuring at too
high a frequency.  Thresholds are used by the ECC hardware as occasional
ECC failures are part of normal operation, but long sequences of ECC
failures usually indicate a memory chip that is about to fail.

Thermal event interrupts occur when a temperature threshold has been
exceeded for some CPU chip.  IIRC, a thermal interrupt is also generated
when the temperature drops back to a normal level.

A spurious interrupt is an interrupt that was raised then lowered by the
device before it could be fully processed by the APIC.  Hence the apic sees
the interrupt but does not know what device it came from.  For this case
the APIC hardware will assume a vector of 0xff.

Rescheduling, call, and TLB flush interrupts are sent from one CPU to
another per the needs of the OS.  Typically, their statistics would be used
to discover if an interrupt flood of the given type has been occuring.

AK: merged v2 and v4 which had some more tweaks
AK: replace Local interrupts with Local timer interrupts
AK: Fixed description of interrupt types.

[ tglx: arch/x86 adaptation ]
[ mingo: small cleanup ]

Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 20:16:53 +02:00
Thomas Gleixner
4e77ae3e10 x86: Fix irq0 / local apic timer accounting
The clock events merge introduced a change to the nmi watchdog code to
handle the not longer increasing local apic timer count in the
broadcast mode. This is fine for UP, but on SMP it pampers over a
stuck CPU which is not handling the broadcast interrupt due to the
unconditional sum up of local apic timer count and irq0 count.

To cover all cases we need to keep track on which CPU irq0 is
handled. In theory this is CPU#0 due to the explicit disabling of irq
balancing for irq0, but there are systems which ignore this on the
hardware level. The per cpu irq0 accounting allows us to remove the
irq0 to CPU0 binding as well.

Add a per cpu counter for irq0 and evaluate this instead of the global
irq0 count in the nmi watchdog code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12 23:04:07 +02:00
Thomas Gleixner
96a388de5d i386/x86_64: move headers to include/asm-x86
Move the headers to include/asm-x86 and fixup the
header install make rules

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:20:03 +02:00