Commit Graph

46 Commits

Author SHA1 Message Date
Clemens Ladisch
d82af9f9aa sound: usb: make the USB MIDI module more independent
Remove the dependecy from the USB MIDI code on the snd_usb_audio
structure.  This allows using the USB MIDI module from another driver
without having to pretend to be the generic USB audio driver.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-24 10:19:59 +01:00
Clemens Ladisch
96f61d9ade sound: usb-audio: allow switching altsetting on Roland USB MIDI devices
Add a mixer control to select between the two altsettings on Roland USB
MIDI devices where the input endpoint is either bulk or interrupt.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-24 10:19:49 +01:00
Akinobu Mita
fbc543915f ALSA: sound: usbmidi: Use hweight16
Use hweight16 instead of Brian Kernighan's/Peter Wegner's method

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-20 08:46:26 +01:00
Clemens Ladisch
a65dd997b3 sound: usb-audio: add MIDI drain callback
When draining, instead of waiting for fifty milliseconds, just wait for
the currently active URBs to complete.  This cuts the usual waiting time
down to one USB frame, or zero in the common case when there is no URB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:41 +02:00
Clemens Ladisch
ed4affa532 sound: usb-audio: use multiple output URBs
Some newer USB MIDI interfaces use rather small packet sizes, so to get
enough bandwidth, we have to be able to send multiple packets in one USB
frame, so we have to use multiple URBs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:30 +02:00
Clemens Ladisch
4773d1fb8f sound: usb-audio: use multiple input URBs
Some newer USB MIDI interfaces use rather small packet sizes, so to get
enough bandwidth, we have to be able to receive multiple packets in one
USB frame, so we have to use multiple URBs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:19 +02:00
Clemens Ladisch
55de5ef970 sound: usb-audio: make the MotU Fastlane work again
Kernel 2.6.18 broke the MotU Fastlane, which uses duplicate endpoint
numbers in a manner that is not only illegal but also confuses the
kernel's endpoint descriptor caching mechanism.  To work around this, we
have to add a separate usb_set_interface() call to guide the USB core to
the correct descriptors.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: David Fries <david@fries.net>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-27 11:25:33 +02:00
Clemens Ladisch
e156ac4c57 sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces
Fix the snd_usbmidi_create_endpoints_midiman() function, which forgot to
set the out_interval member of the endpoint info structure for Midiman/
M-Audio devices.  Since kernel 2.6.24, any non-zero value makes the
driver use interrupt transfers instead of bulk transfers.  With EHCI
controllers, these random interval values result in unbearably large
latencies for output MIDI transfers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-by: David <devurandom@foobox.com>
Tested-by: David <devurandom@foobox.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16 15:31:48 +01:00
Julia Lawall
913ae5a24e ALSA: sound/usb: Use negated usb_endpoint_xfer_control, etc
This patch extends 42a6e66f1e by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.

This patch also rewrites some calls to usb_endpoint_dir_in as negated calls
to !usb_endpoint_dir_out, and vice versa, to better correspond to the
intent of the original code.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-04 12:10:04 +01:00
Julia Lawall
42a6e66f1e ALSA: sound/usb: use USB API functions rather than constants
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-01 10:27:33 +01:00
Takashi Iwai
1f04128a3d ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule().  The former often causes troubles with
RT-kernels, and has actually no merit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-18 12:17:55 +01:00
Takashi Iwai
7a17daae8e ALSA: usb - Fix possible Oops at USB-MIDI disconnection
The endpoints should be released immediately at disconnection
rather than the delayed release.  This could be a reason of Oops
at USB-audio device disconnection being used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:48 +02:00
Karsten Wiese
030a07e441 ALSA: Add USB US122L driver
Added a new US122L usb-audio driver.  This driver works together with a
dedicated alsa-lib plugin.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01 13:37:12 +02:00
Takashi Iwai
c0792e00bc [ALSA] race between disconnect and error handling in usbmidi
The driver resubmits URBs from an error handler and schedules the error
handler from the URBs' completion handlers. To reliably kill the cycle
a flag must be used.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Clemens Ladisch
56162aabb2 [ALSA] usb-audio: add workaround for ESI MIDI Mate/RomIO II
Force low speed USB MIDI devices like the ESI MIDI Mate and RomIO II to
use interrupt transfers because the USB core would not be happy about
low speed bulk transfers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:19 +02:00
Clemens Ladisch
a6a712aeb1 [ALSA] usb-audio: allow output interrupt transfers for MIDI
Allow output interrupt transfers for some MIDI devices that require
them.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:18 +02:00
Clemens Ladisch
61870aed22 [ALSA] usb-audio: fix parsing of SysEx messages from CME keyboards
When CME keyboards send a SysEx message (e.g. master volume), the USB
packet uses a format different from the standard format.  Parsing this
packet according to the specification corrupts the SysEx message itself
and can cause the following MIDI messages to be misinterpreted, too.
This patch adds a workaround for this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:01 +02:00
Clemens Ladisch
490cbd92ed [ALSA] usb-audio: work around wrong wMaxPacketSize on ESI M4U
Add a workaround for the ESI M4U that claims to support 32-byte packets
but ignores the remaining bytes of packets bigger than four bytes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:56:17 +02:00
Clemens Ladisch
d05cc10432 [ALSA] usb-audio: work around broken M-Audio MidiSport Uno firmware
The firmware of the M-Audio USB Uno MIDI Interface has, at least in
hardware revision 1.25, a bug that garbles its USB output.  When it
receives a Note On MIDI message that uses running status, the resulting
USB MIDI packet has a wrong CIN (4 instead of 9) and a wrong length
(2 bytes, the status byte is still missing).
This patch adds a workaround to track the CINs and the MIDI messages of
received USB MIDI packets to detect whether a packet with CIN 4 is a
correct SysEx packet or a buggy running status packet.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:56:17 +02:00
Mariusz Kozlowski
f5e135af87 usb: usbmidi kill urb cleanup
- usb_kill_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:35 -08:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Alexey Dobriyan
52978be636 [PATCH] kmemdup: some users
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:19 -07:00
Pete Zaitcev
38e2bfc94e USB: Dealias -110 code (more complete)
The purpose of this patch is to split off the case when a device does
not reply on the lower level (which is reported by HC hardware), and
a case when the device accepted the request, but does not reply at
upper level. This redefinition allows to diagnose issues easier,
without asking the user if the -110 happened "immediately".

The usbmon splits such cases already thanks to its timestamp, but
it's not always available.

I adjusted all drivers which I found affected (by searching for "urb").
Out of tree drivers may suffer a little bit, but I do not expect much
breakage. At worst they may print a few messages.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:59:00 -07:00
Ben Williamson
c4a87ef4de [ALSA] USB midi: Remove duplicate CS_AUDIO_* #defines
Removed the CS_AUDIO_* #defines, which were duplicates of the
class-specific USB_DT_CS_* #defines in <linux/usb_ch9.h>.

Signed-off-by: Ben Williamson <ben.williamson@greyinnovation.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:34:31 +02:00
Clemens Ladisch
a7b928ac5f [ALSA] rawmidi: add get_port_info callback for sequencer information flags
Add a get_port_info callback to the snd_rawmidi_global_ops structure to
allow the USB MIDI driver to supply information flags for the sequencer
ports created by seq_midi.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22 21:33:20 +02:00
Clemens Ladisch
62f09c3d32 [ALSA] usb-audio: optimize snd_usbmidi_count_bits()
Modules: USB generic driver

Reduce the code size of the snd_usbmidi_count_bits() function by using
simpler operations.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:31:19 +01:00
Clemens Ladisch
cc7a59bd8d [ALSA] usb-audio: rename QUIRK_MIDI_MIDITECH to QUIRK_MIDI_CME
Modules: USB generic driver

Rename QUIRK_MIDI_MIDITECH to QUIRK_MIDI_CME because Miditech keyboards
are built by CME and use the same protocol, and don't force a Miditech
product name for the USB ID used by both Miditech and CME UF-x
keyboards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:28:22 +01:00
Clemens Ladisch
7c79b7682e [ALSA] usb-audio: cosmetic changes
Modules: USB generic driver

Move some entries around to keep them sorted by ID.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:22:22 +01:00
Brent Cook
e03173fce2 [ALSA] Add support for EDIROL UM-3ex
Modules: USB generic driver

This is my naive attempt at adding ALSA device support. The attached
patch provides support for the EDIROL UM-3ex. This is a 3-port USB midi
interface with a built-in USB hub and the ability to chain 2 other
UM-3x's in a master-slave configuration. I only have one, so I do not
know how this works in practice.

Though this is a 3-port device, I had to throw in that 4th 'Control' interface
to the definition in order to make the 3rd port work. If I set in/out_cables
to 0x000b, a 3rd interface appears on the driver, but it does nothing.
Changing it to 0x000f allows the 3rd interface to work, but of course
interface 4 does not work because it does not exist.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22 10:22:14 +01:00
Takashi Iwai
86e07d3465 [ALSA] Remove xxx_t typedefs: USB-Audio
Modules: USB generic driver

Remove xxx_t typedefs from the USB-Audio driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:19:55 +01:00
Clemens Ladisch
c8a7e5c40d [ALSA] usb-audio: remove superfluous include
Modules: USB generic driver

Remove a superfluous include of the sound/minors.h header.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-11-04 13:20:03 +01:00
Clemens Ladisch
3527a008cb [ALSA] usb-audio: remove old compatibility wrappers (2/2)
Modules: USB generic driver

Move the usb_complete_callback() compatibility wrapper out of the
kernel tree.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-11-04 13:16:39 +01:00
Clemens Ladisch
3cfc1eb181 [ALSA] usb-audio: remove old compatibility wrappers (1/2)
Modules: USB generic driver

Move the usb_pipe_needs_resubmit() compatibility wrapper out of the
kernel tree.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-11-04 13:16:37 +01:00
Clemens Ladisch
d1bda04554 [ALSA] usb-audio: simplify MIDI quirk handling
Modules: USB generic driver

Simplify the handling of MIDI quirks by treating an interface without
quirks as a QUIRK_MIDI_STANDARD_INTERFACE.

This also fixes the bug where a MIDI_STANDARD quirk would not be
recognized.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-11-04 13:15:49 +01:00
Al Viro
55016f10e3 [PATCH] gfp_t: drivers/usb
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:49 -07:00
Takashi Iwai
561b220a4d [ALSA] Replace with kzalloc() - others
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3
OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers
AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver
SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth
USB generic driver,USB USX2Y
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 10:48:22 +02:00
Clemens Ladisch
c88469704d [ALSA] usb-audio: throttle MIDI URB resubmits on USB errors
USB generic driver
When a USB error occurs that might indicate that the device has been
unplugged, don't resubmit the URB immediately to prevent flooding the
log with error messages before khubd has us disconnect()ed.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30 13:14:13 +02:00
Clemens Ladisch
c347e9fca7 [ALSA] usb-audio: fix Emagic MIDI protocol handling
USB generic driver
Emagic devices pad their packets not with 0xff bytes but with a 0xff
byte followed by garbage, so we have to stop at the first such byte.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30 08:47:34 +02:00
Clemens Ladisch
55851f734d [ALSA] usb-audio: use usb_buffer_alloc/free
USB generic driver
Use the USB buffer allocation functions to avoid repeated DMA mappings
of our buffers, which are re-used quite a lot.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30 08:45:53 +02:00
Clemens Ladisch
f38275fe99 [ALSA] usb-audio - add support for Miditech USB MIDI keyboards
USB generic driver
Add support for Miditech Midistart and MidiStudio keyboards (another
case of devices using the standard protocol but having no descriptors).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-07-28 12:22:37 +02:00
Clemens Ladisch
6155aff84b [ALSA] usb-audio - rename QUIRK_MIDI_MOTU to QUIRK_MIDI_RAW
USB generic driver
Rename the protocol used by the MOTU FastLane to 'raw' because it might
be useful with other devices, and there are other MOTU interfaces that
do not use this protocol.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-07-28 12:21:41 +02:00
Clemens Ladisch
27d10f5664 [ALSA] usb-audio - cache vendor/product IDs
USB generic driver
Cache the decoded values of idVendor/idProduct to get rid of most of
those ugly le16_to_cpu() calls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29 10:05:47 +02:00
Clemens Ladisch
ee7333970b [ALSA] usb-audio - remove superfluous parameter
USB generic driver,USB USX2Y
This patch removes the superfluous driver parameter from the
disconnect functions.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29 10:05:14 +02:00
Clemens Ladisch
c1ab5d59a0 [ALSA] usb-audio - allow USB MIDI quirks to specify endpoints explicitly
USB generic driver
This patch reintroduces the check for endpoint numbers that are
specified explicitly in the quirk structure.
This check was accidentally dropped in the last rewrite of
snd_usbmidi_detect_endpoints().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29 09:00:53 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00