Commit Graph

124 Commits

Author SHA1 Message Date
Russell King
a177ba3b7a Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', 'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel 2008-07-10 16:38:50 +01:00
sedji gaouaou
613526677a [ARM] 5130/4: Support for the at91sam9g20
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.

AT91sam9g20 is an evolution of the at91sam9260 with a faster clock
speed.
We created a new board for this device but based the chip support
directly on 9260 files with little updates.
Here is the chip page on Atmel wabsite:
http://atmel.com/dyn/products/product_card.asp?part_id=4337

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 12:13:47 +01:00
Patrice Vilchez
16074b669e [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.
New timings are based on application note
"NAND Flash Support on AT91SAM9 Microcontrollers" available at
http://atmel.com/dyn/resources/prod_documents/doc6255.pdf).

Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 22:16:00 +01:00
Nicolas Ferre
ba45ca4350 [ARM] 4940/1: AT91: UDPHS driver: SAM9RL board and cpu integration.
Adds support for the USB High Speed Device Port on the AT91SAM9RL
system on chip. The AT91SAM9RL uses the same UDPHS IP as the AVR32 and
the AT91CAP9 (atmel_usba_udc driver).

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 15:08:13 +01:00
Stelian Pop
7c8cf66529 [ARM] 4934/1: AT91CAP9 UDPHS driver: board and cpu integration.
This is patch 2 of 2 adding support for the USB High Speed Device Port
on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP
as the AVR32 and the AT91SAM9RL.

This patch declares the UDPHS ressources in the at91cap9 (cpu and
adk board) files, wires up the atmel_usba_udc driver to them,
and activates the driver in the defconfig.

Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 15:08:09 +01:00
Stelian Pop
53d7168026 [ARM] 4933/1: AT91CAP9 UDPHS driver: generic AT91 parts.
This is patch 1 of 2 adding support for the USB High Speed Device Port
on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP
as the AVR32 and the AT91SAM9RL.

This patch makes the generic AT91 adaptations, mainly dealing with
the addition of the UDPHS UTMI clock.

Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 15:08:07 +01:00
Andrew Victor
19750336d4 [ARM] 5059/1: [AT91] Convert to new-style UART initialization
Convert the following AT91RM9200-based boards to the new-style UART
initialization:
  - Conitec ARM&EVA
  - Atmel AT91RM9200-DK
  - Embest ATEB9200
  - Atmel AT91RM9200-EK
  - KwikByte KB920x

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 13:53:12 +01:00
Andrew Victor
ca0a789ab9 [ARM] 5057/1: [AT91] Calao Systems - board files
Add support for three AT91-based boards available from Calao Systems:
USB_A9260, USB_A9263 and QIL_A9260.

Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 13:53:10 +01:00
Andrew Victor
e3ba22db09 [ARM] 5056/1: [AT91] Cleanup YL9200 board file
Cleanup the YL9200 board-support file.

Other things fixed are:
 - Use new-style UART initialization
 - Register all LEDs as gpio_leds.
 - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE
 - The only I2C device is the AT24C eeprom.
 - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA.
 - Configure touchscreen interrupt pin.

Also adding the board to the KConfig and Makefile.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 13:53:08 +01:00
Greg Ungerer
66aaeff1c2 [ARM] 5052/1: export clock functions for the at91x40
Export the AT91 clock functions for the AT91X40. Some external code common
to all AT91 family parts relys on this, like the gpio and serial support.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23 13:50:07 +01:00
Nicolas Ferre
90898709df atmel_lcdfb: fix initialization of a pre-allocated framebuffer
Fix initialization of framebuffer not calling ioremap_writecombine() function
and not using internal SRAM for at91sam9rl.

This is a little rework of the "Don't initialize a pre-allocated framebuffer"
patch that corrects the call to ioremap_writecombine() function.

It also cuts the use of internal SRAM for at91sam9rl : it is a bit small
for a framebuffer.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:11:13 -07:00
Linus Torvalds
d973664992 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] pxa: fix 1c104e0e4f
  [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed
  [ARM] am79c961a: platform_get_irq() may return signed unnoticed
  [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page()
  [ARM] Feroceon: fix function alignment in proc-feroceon.S
  [ARM] Orion: catch a couple more alternative spellings of PCIe
  [ARM] Orion: fix orion-ehci platform resource end addresses
  [ARM] Orion: fix ->map_irq() PCIe bus number check
  [ARM] Orion: fix ioremap() optimization
  [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check
  [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check
  kprobes/arm: fix decoding of arithmetic immediate instructions
  kprobes/arm: fix cache flush address for instruction stub
  [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2
  [ARM] 5021/1: at91: buildfix for sam9263 + PM
  [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation
  [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263
  [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake()
  [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info
  [ARM] 5014/1: Cleanup reset state before entering suspend or resetting.
  ...
2008-04-29 15:18:06 -07:00
Jean Delvare
3760f73671 i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29 23:11:40 +02:00
David Brownell
136eb95577 [ARM] 5021/1: at91: buildfix for sam9263 + PM
Build fix for power management on at91sam9263:  it has two memory
controllers instead of just one, so it might have two banks of
DRAM to put into selfrefresh mode.  For now we continue to assume
only the first bank is populated.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28 17:03:34 +01:00
Nicolas Ferre
fb8b131ba8 [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263
typo in mci configuration in devices files

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28 17:03:33 +01:00
Haavard Skinnemoen
01d3a5e7fa atmel_lcdfb: don't initialize a pre-allocated framebuffer
If the user specified a fixed framebuffer address on the command line, it may
have been initialized already with a splash image or something, so we
shouldn't clear it.

Therefore, we should only initialize the framebuffer if we allocated it
ourselves.  This patch also updates the AVR32 setup code to clear the
framebuffer if it allocated it itself, i.e.  the user didn't provide a fixed
address or the reservation failed.

I've updated the at91 platform code as well so that it initializes the
framebuffer if it is located in SRAM, but I haven't tested that it actually
works.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Nicolas FERRE <nicolas.ferre@rfo.atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:38 -07:00
Linus Torvalds
429f731dea Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  Deprecate the asm/semaphore.h files in feature-removal-schedule.
  Convert asm/semaphore.h users to linux/semaphore.h
  security: Remove unnecessary inclusions of asm/semaphore.h
  lib: Remove unnecessary inclusions of asm/semaphore.h
  kernel: Remove unnecessary inclusions of asm/semaphore.h
  include: Remove unnecessary inclusions of asm/semaphore.h
  fs: Remove unnecessary inclusions of asm/semaphore.h
  drivers: Remove unnecessary inclusions of asm/semaphore.h
  net: Remove unnecessary inclusions of asm/semaphore.h
  arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21 15:41:27 -07:00
Matthew Wilcox
950e4da324 arch: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:14:49 -04:00
Andrew Victor
ad48ce74f7 [ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents
Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent
infrastructure:

 - Clocksource gives sub-microsecond timestamp precision, assuming
 memory is clocked at over 16 MHz.  It's less than a 32 bit counter,
 unless it's is also generating IRQs.

 - Clockevent device supports periodic mode only; no oneshot
 support from this hardware.  No IRQs generated unless it's the
 active clocksource.

Later, another timer (probably from a TC module) can provide a oneshot
clockevent device to get NO_HZ and High-Res-Timer behavior.

This also updates the timekeeping to use the actual master clock rate
on the system, instead of compile-time <asm/arch/timex.h> constants
matching what Atmel's EK boards use.  (Product boards may well differ!)

Plus cleanup:  rename "*_timer*" symbols to "*_pit*" (there are other
timers, but only one PIT); shorter lines; remove needless CPP stuff;
make several symbols static; etc.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 15:55:54 +01:00
Andrew Victor
11aadac4f6 [ARM] 4982/1: [AT91] Drop old-style UART initialization (Part 1)
All the SAM9 boards supported by mainline and the AT91 patches have
been converted to the new-style UART initialization.  Therefore drop
support for the old at91_init_serial() interface for SAM9.

at91_uarts[] array can also be marked as __initdata.

The warning that no serial-console is defined moved from
at91_set_serial_console() to at91_add_device_serial() since the whole
point is the board-specific file is not calling
at91_set_serial_console().

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 15:55:52 +01:00
Andrew Victor
2f036ac63e [ARM] 4980/1: [AT91] emQbit ECB_AT91 board support
Support for the emQbit ECB_AT91 board.
  <http://wiki.emqbit.com/free-ecb-at91>

Original patch from Nelson Castillo.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 15:55:51 +01:00
Andrew Victor
66dbfc6cd9 [ARM] 4979/1: [AT91] Olimex SAM9-L9260 board support
Support for the Olimex SAM9-L9260 board.
 <http://www.olimex.com/dev/sam9-L9260.html>

Original patch from Ivan Vasilev.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 15:55:50 +01:00
Andrew Victor
35131fb6c2 [ARM] 4978/1: [AT91] KB9260 (CAM60) board support
Support for the Kwikbyte KB9260 (CAM60) board.
 <http://www.kwikbyte.com/KB9260.html>

Original patch from Kwikbyte.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 15:55:48 +01:00
Bill Gatliff
ca15447902 [ARM] 4938/1: [CSB637] Convert heartbeat LED to gpio-leds
Converts the D1/PB2 LED to use the gpio-leds API and heartbeat trigger.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10 14:59:58 +01:00
Bill Gatliff
952c855fc7 [ARM] 4937/1: [CSB637] Convert to new-style UART initialization
Converts the CSB637 to the new-style UART initialization API.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10 14:59:57 +01:00
Bill Gatliff
c8fc191656 [ARM] 4936/1: [CSB337] Converts to new-style UART initialization
Converts the CSB337 target to the new UART initialization API.

Signed-off-by:  Bill Gatliff <bgat@billgatliff.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10 14:59:56 +01:00
Andrew Victor
5b7659d190 [ARM] 4911/1: [AT91] LEDs on SAM9260-EK and SAM9261-EK boards
Add support for the GPIO-driven LEDs (using NEW_LEDS) on the Atmel
SAM9260-EK and SAM9261-EK boards.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:28 +01:00
Andrew Victor
5e9df924dd [ARM] 4910/1: [AT91] AT73C213 audio on SAM9260-EK and SAM9261-EK boards
Add support for AT73C213 audio DAC on the Atmel SAM9260-EK and
SAM9261-EK boards.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:27 +01:00
Andrew Victor
e5f40bfaf3 [ARM] 4909/1: [AT91] Timer/Counter Block platform_devices
Register platform_devices for the Timer/Counter Block peripherals
found on the AT91RM9200, SAM9 & CAP9 processors.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:25 +01:00
Andrew Victor
4fd9212cb9 [ARM] 4908/1: [AT91] RTT platform_device fix
The RTT-as-RTC driver will search for the user-specified RTT
peripheral via ID number (0 .. 1).
Therefore if the processor only contains a single RTT peripheral, we
need to set its platform_device.id to "0" instead of "-1".
Also add the missing platform_device resource for the CAP9 processor.

Bug reported by Sedji Gaouaou.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:24 +01:00
Andrew Victor
565ac44593 [ARM] 4907/1: [AT91] SAM9/CAP9 reset reason
The Reset controller on the SAM9/CAP9 processors will store the reason
for the last system reset.
On startup, display this information (wakeup signal, RTT alarm,
watchdog reset, user reset, etc)

Based on patch from David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:23 +01:00
Andrew Victor
f5d0f4574f [ARM] 4906/1: [AT91] SAM9/CAP9 basic power-management
Basic power-management (suspend-to-ram) support for Atmel SAM9 and
CAP9 processors.

Based on comments & patches from Anti Sullin and David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:22 +01:00
Andrew Victor
a3da12229f [ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initialization
Convert the Atmel SAM9260-EK, SAM9261-EK, SAM9263-EK and SAM9RL-EK
boards to use the new-style UART initialization.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:21 +01:00
Andrew Victor
d7a2415f7a [ARM] 4904/1: [AT91] Pass ECC controller to NAND driver
On AT91 processors that include an ECC controller, pass its base
address to the NAND driver via platform_device resources.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:20 +01:00
Andrew Victor
3ef2fb4267 [ARM] 4903/1: [AT91] SAM9/CAP9 system shutdown
Enable system shutdown/power-off on AT91SAM9 and AT91CAP9 based boards.
This does not require power-management to be enabled, and the
pm_power_off method can be overridden in board-specific files if
necessary.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:19 +01:00
Andrew Victor
b78eabde89 [ARM] 4902/1: [AT91] SAM9/CAP9 memory controller header
The AT91CAP9 processor includes the same Static Memory Controller
(SMC) peripheral as the SAM9 processors, but replaces the SDRAM
Controller with a DDR/SDR Controller (DDRSDRC).

This patch splits the existing
include/asm-arm/arch-at91/at91sam926x_mc.h into at91sam9_sdramc.h and
at91sam9_smc.h.
It also adds an at91cap9_ddrsdr.h for the DDRSDRC controller.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:18 +01:00
Steve Birtles
3ad0920d7b [ARM] 4825/1: adds support for YL9200 board
1. Configuration file for YL9200
2. Board file fro YL9200

Adds support for the UCdragon YL9200 board available widly in China

Signed-off-by: steve birtles <arm_kernel_development@micromark.net.cn>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-28 17:37:07 +00:00
Nicolas Ferre
6bb68f8867 [ARM] AT91: correct at91sam9263ek LCD power gpio pin
Correct GPIO pin assignment for the LCD power control (PCI)

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06 12:18:18 +00:00
David Brownell
37aca70c62 [ARM] 4848/1: at91: remove false lockdep warnings
Remove false lockdep warnings about lock recursion when declaring
IRQs as being wake-capable, by marking putting GPIO irq_desc locks
into their own class.

(Thanks to Peter Zijlstra for helping track down such a small
fix to this problem.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06 12:18:18 +00:00
David Brownell
72e7ae8141 [ARM] 4823/1: AT91 section fix
Fix section warning:

 WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference
        from the function init_programmable_clock()
        to the function .init.text:at91_css_to_clk()
 The function  init_programmable_clock() references
 the function __init at91_css_to_clk().
 This is often because init_programmable_clock lacks a __init
 annotation or the annotation of at91_css_to_clk is wrong.

In this case the only calls to and from init_programmable_clock()
are from code marked as "__init", so this fix is trivially correct.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Uwe Kleine-Knig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-09 22:43:15 +00:00
David Brownell
a9a84c37d1 atmel_lcdfb: backlight control
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from
the LCD controller.  It's controlled by "contrast" registers though.

This patch lets boards declare that they have that kind of backlight
control.  The driver can then export this control, letting screenblank and
other operations actually take effect ...  reducing the typically
substantial power drain from the backlight.

Note that it's not fully cooked
  - doesn't force backlight off during system suspend
  - the "power" and "blank" events may not be done right
This should be easily added in the future.

[nicolas.ferre@atmel.com: remove unneeded inline and rename functions]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:16 -08:00
Russell King
0d899e1b00 Merge branches 'at91', 'ixp', 'master', 'misc', 'pxa' and 'realview' into devel
* at91:
  [ARM] 4802/1: Fix typo and remove vague comment
  [ARM] 4660/3: at91: allow selecting UART for early kernel messages
  [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work

* ixp:
  [ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c
  [ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c
  [ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c
  [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards
  [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver
  [ARM] 4715/2: Ethernet support for IXDP425 boards
  [ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers
  [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features
  [ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits
  [ARM] 4774/2: ixp4xx: Register dsmg600 rtc i2c_board_info
  [ARM] 4773/2: ixp4xx: Register nas100d rtc i2c_board_info
  [ARM] 4772/2: ixp4xx: Register nslu2 rtc i2c_board_info
  [ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board
  [ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board
  [ARM] 4767/2: ixp4xx: Add bitops.h include to io.h
  [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards

* master:
  [ARM] 4810/1: - Fix 'section mismatch' building warnings
  [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking
  [ARM] 21285 serial: fix build error

* misc:
  [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags

* pxa:
  [ARM] 4798/1: pcm027: fix missing header file
  [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1
  [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h
  [ARM] pxa: introduce sysdev for pxa3xx static memory controller
  [ARM] pxa: add preliminary suspend/resume code for pxa3xx
  [ARM] pxa: introduce sysdev for GPIO register saving/restoring
  [ARM] pxa: introduce sysdev for IRQ register saving/restoring
  [ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data"
  [ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass

* realview:
  [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option
  [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c
  [ARM] 4820/1: RealView: Select the timer IRQ at run-time
  [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms
  [ARM] 4818/1: RealView: Add core-tile detection
  [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c
  [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h
  [ARM] 4815/1: RealView: Add clockevents suport for the local timers
  [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore
  [ARM] 4813/1: Add SMP helper functions for clockevents support
  [ARM] 4812/1: RealView: clockevents support for the RealView platforms
  [ARM] 4811/1: RealView: clocksource support for the RealView platforms
2008-02-04 17:54:39 +00:00
Guennadi Liakhovetski
fa3218d859 [ARM] 4660/3: at91: allow selecting UART for early kernel messages
Currently early kernel messages, i.e., those from uncompression, go to the
debugging UART. And if it is enabled in the platform configuration, but
not initialized by the bootloader, the machine hangs, waiting for UART
status change. Besides, having those messages on another UART - typically
the console UART - may be preferrable. This patch allows selecting the
UART in kernel configuration.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:16:39 +00:00
David Brownell
e83aff58bf [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work
On the at91sam9263, IRQs for GPIO banks C and D don't currently work.
This is because banks C, D, and E share one clock and toplevel IRQ, but
the AT91 code setting up and handling GPIO IRQs expects no sharing.
This patch:

 - Fixes GPIO IRQ setup and handling to cope with GPIO banks that are
   shared like on sam9263 chips, by setting up a list of those banks
   and making the IRQ dispatching logic scan that list.

 - Precomputes the address of each bank's registers, saving it with
   other per-bank data so that it no longer needs to be constantly
   recomputed during IRQs and other GPIO operations.  That shrinks
   hot-path code, while helping the GPIO bank irq updates.

 - Fixes a minor bug where IRQ_TYPE_NONE was wrongly rejected (it just
   means "use the default", which is "both edges" here).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:16:39 +00:00
Peter Zijlstra
66a2c077c3 [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking
move update_process_times() out from under xtime_lock.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:14:07 +00:00
Rafael J. Wysocki
c697eecebc Suspend: Introduce begin() and end() callbacks
On ACPI systems the target state set by acpi_pm_set_target() is
reset by acpi_pm_finish(), but that need not be called if the
suspend fails.  All platforms that use the .set_target() global
suspend callback are affected by analogous issues.

For this reason, we need an additional global suspend callback that
will reset the target state regardless of whether or not the suspend
is successful.  Also, it is reasonable to rename the .set_target()
callback, since it will be used for a different purpose on ACPI
systems (due to ACPI 1.0x code ordering requirements).

Introduce the global suspend callback .end() to be executed at the
end of the suspend sequence and rename the .set_target() global
suspend callback to .begin().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:56 -05:00
David Brownell
eaf858a988 [ARM] 4615/4: sam926[13]ek buttons updated
From: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>

On the at92sam9263ek board, tell the input subsystem about the buttons.
This patch is taken from Andrew Victor's at91 patchset, then updated to
match the latest kernel code and to use labels printed on the board.

Also update the at91sam9261ek buttons to cope with input changes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-27 17:54:16 +00:00
Andrew Victor
86640cae60 [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
Add support for the Atmel AT91CAP9A-DK Evaluation Kit board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:01:14 +00:00
Andrew Victor
2b3b3516b6 [ARM] 4764/1: [AT91] AT91CAP9 core support
Add support for Atmel's AT91CAP9 Customizable Microcontroller family.
  <http://www.atmel.com/products/AT91CAP/Default.asp>

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:01:13 +00:00
Christian Glindkamp
da7a42d60b [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
Currently the udc pullup is enabled by default on boot. If the device
is connected to a host at this time, the host starts the negotiation
before the udc/gadget driver is ready to handle it.

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:33 +00:00