Commit Graph

57 Commits

Author SHA1 Message Date
Jared Hulbert
a98889f3d8 [MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition
to virtual address.  This physical address is required for XIP of
userspace code from flash.

Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Reviewed-by: Jörn Engel <joern@logfs.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 18:59:11 +01:00
David Woodhouse
27c72b040c [JFFS2] Track parent inode for directories (for NFS export)
To support NFS export, we need to know the parent inode of directories.
Rather than growing the jffs2_inode_cache structure, share space with
the nlink field -- which was always set to 1 for directories anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 18:47:17 +01:00
David Woodhouse
2c61cb250c [JFFS2] Introduce dbg_readinode2 log level, use it to shut read_dnode() up
We haven't seen bugs in this for a while now, since the rewrite. No need
to be _quite_ so verbose...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 16:43:15 +01:00
David Woodhouse
ced2207036 [JFFS2] semaphore->mutex conversion
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 15:13:40 +01:00
Linus Torvalds
a8e98d6d51 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (120 commits)
  [MTD] Fix mtdoops.c compilation
  [MTD] [NOR] fix startup lock when using multiple nor flash chips
  [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
  [MTD] Fix maps/physmap.c compilation with CONFIG_PM
  [MTD] onenand: Add panic_write function to the onenand driver
  [MTD] mtdoops: Use the panic_write function when present
  [MTD] Add mtd panic_write function pointer
  [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
  [MTD] physmap.c: Add support for multiple resources
  [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
  [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
  [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
  [MTD] [NAND] Remove unused variable in plat_nand_remove
  [MTD] Unlocking all Intel flash that is locked on power up.
  [MTD] [NAND] at91_nand: Make mtdparts option can override board info
  [MTD] mtdoops: Various minor cleanups
  [MTD] mtdoops: Ensure sequential write to the buffer
  [MTD] mtdoops: Perform write operations in a workqueue
  [MTD] mtdoops: Add further error return code checking
  [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
  ...
2008-02-07 10:20:31 -08:00
Robert P. J. Day
e1b8513d21 Typoes: "whith" -> "with"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:14:02 +02:00
Alexey Korolev
c2056e1e1d [JFFS2] Fix return value check for mtd->point() in check_node_data()
If we ask it to map 'len' bytes of the device, don't compare against 
some other number and whine that it's different. That's a little silly.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-28 11:54:55 +00:00
David Woodhouse
92525726df [JFFS2] Fix data CRC checking on NOR flash.
We were failing to check the data CRC on data nodes on non-writebuffered
flash, which led to "interesting" behaviour on unclean shutdowns.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-21 12:08:16 -05:00
Andy Lowe
59d8235be2 [JFFS2] Fix unpoint length
Fix a couple of instances in JFFS2 where the unpoint() routine is
being called with the wrong length in cases where the point() routine
truncated a request.

Signed-off-by: Andy Lowe <alowe@mvista.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-23 18:41:17 +01:00
David Woodhouse
ef53cb02ff [JFFS2] Whitespace cleanups.
Convert many spaces to tabs; one or two other minor cosmetic fixes.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10 10:01:22 +01:00
David Woodhouse
b2e25235fe [JFFS2] Print correct node offset when complaining about broken data CRC
Debugging the hardware problems in OLPC trac #1905 would be a whole lot
easier if the correct node offsets were printed for the offending nodes.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-05 01:57:26 -04:00
David Woodhouse
14c6381ee4 [JFFS2] Fix readinode failure when read_dnode() detects CRC failure.
We should have stopped returning 1 from read_dnode() to indicate
failure. We can just mark the damn thing obsolete immediately. But I
missed a case where we don't.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-03 16:51:19 -04:00
David Woodhouse
43dfa07fbb [JFFS2] Deletion dirents should be REF_NORMAL, not REF_PRISTINE.
Otherwise they'll never actually get garbage-collected.
Noted by Jonathan Larmour.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-29 13:39:57 +01:00
David Woodhouse
0477d24e2a [JFFS2] Fix obsoletion of metadata nodes in jffs2_add_tn_to_tree()
We should keep the mdata node with higher version number, not just the
one we happen to find latest. Doh.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-01 20:04:43 +01:00
Artem Bityutskiy
ea55d30798 [JFFS2] Fix buffer length calculations in jffs2_get_inode_nodes()
If we have already read enough bytes, no need to call read_more().

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-01 13:20:29 +01:00
David Woodhouse
1c97964520 [JFFS2] Simplify and clean up jffs2_add_tn_to_tree() some more.
Fixing at least a couple more bugs in the process.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-08 00:19:54 +01:00
David Woodhouse
fcf3cafb3e [JFFS2] Remove another bogus optimisation in jffs2_add_tn_to_tree()
We attempted to insert new nodes into the tree by just using
rb_replace_node to let them replace an earlier node which they
completely overlapped. However, that could place the new node into the
wrong place in the tree, since its start could be node only before the
start of the victim, but before the node _before_ the victim in the tree
(if that previous node actually ends _after_ the new node, thus isn't
entirely overlapped and wasn't itself chosen to be the victim).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-07 13:16:13 +01:00
David Woodhouse
96dd8d25d1 [JFFS2] Remove broken insert_point optimisation in jffs2_add_tn_to_tree()
The original code would remember, during the first pass over the tree,
a suitable place to start the insertion from when we eventually come
to add a new node.

The optimisation was broken, and we sometimes ended up inserting a new
node in the wrong place because we started the insertion from the wrong
point.

Just ditch the optimisation and start the insertion from the root of the
tree, for now. I'll try it again when I'm feeling cleverer.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-06 14:41:40 +01:00
David Woodhouse
1123e2a859 [JFFS2] Remember to calculate overlap on nodes which replace older nodes
This fixes a problem Artem found with the integck test tool -- we
weren't correctly keeping track of the 'overlap' flag in some cases,
which led to the nodes being played back in an incorrect order and file
corruption.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-05 16:29:34 +01:00
David Woodhouse
61c4b23770 [JFFS2] Handle inodes with only a single metadata node with non-zero isize
This should never happen unless there's corruption on the medium and the
actual data nodes go missing. But the failure mode (an oops when we assume
the fragtree isn't empty and go looking for its last node) isn't useful.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 17:04:23 +01:00
David Woodhouse
c00c310eac [JFFS2] Tidy up licensing/copyright boilerplate.
In particular, remove the bit in the LICENCE file about contacting
Red Hat for alternative arrangements. Their errant IS department broke
that arrangement a long time ago -- the policy of collecting copyright
assignments from contributors came to an end when the plug was pulled on
the servers hosting the project, without notice or reason.

We do still dual-license it for use with eCos, with the GPL+exception
licence approved by the FSF as being GPL-compatible. It's just that nobody
has the right to license it differently.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 14:16:47 +01:00
Joakim Tjernlund
0dec4c8bc6 [JFFS2] Better fix for all-zero node headers
No need to check for all-zero header since the header cannot
be zero due to other checks.

Replace the all-zero header check in readinode.c with a
check for the magic word.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 04:13:06 +01:00
David Woodhouse
df8e96f391 [JFFS2] Improve read_inode memory usage, v2.
We originally used to read every node and allocate a jffs2_tmp_dnode_info
structure for each, before processing them in (reverse) version order
and discarding the ones which are obsoleted by later nodes.

With huge logfiles, this behaviour caused memory problems. For example, a
file involved in OLPC trac #1292 has 1822391 nodes, and would cause the XO
machine to run out of memory during the first stage of read_inode().

Instead of just inserting nodes into a tree in version order as we find
them, we now put them into a tree in order of their offset within the
file, which allows us to immediately discard nodes which are completely
obsoleted.

We don't use a full tree with 'fragments' pointing to the real data
structure, as we do in the normal fragtree. We sort only on the start
address, and add an 'overlapped' flag to the tmp_dnode_info to indicate
that the node in question is (partially) overlapped by another.

When the scan is complete, we start at the end of the file, adding each
node to a real fragtree as before. Where the node is non-overlapped, we
just add it (it doesn't matter that it's not the latest version; there is
no overlap). When the node at the end of the tree _is_ overlapped, we sort
it and all its overlapping nodes into version order and then add them to
the fragtree in that order.

This 'early discard' reduces the peak allocation of tmp_dnode_info
structures from 1.8M to a mere 62872 (3.5%) in the degenerate case
referenced above.

This version of the patch also correctly rememembers the highest node
version# seen for an inode when it's scanned.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 03:23:42 +01:00
Artem Bityutskiy
10731f8300 [JFFS2] fix buffer sise calculations in jffs2_get_inode_nodes()
In read inode we have an optimization which prevents one
min. I/O unit (e.g. NAND page) to be read more then once.

Namely, at the beginning we do not know which node type we read,
so we read so we assume we read the directory entry, because it
has the smallest node header. When we read it, we read up to the
next min. I/O unit, just because if later we'll need to read more,
we already have this data.

If it turns out to be that the node is not directory entry, and
we need more data, and we did not read it because it sits in the
next min. I/O unit, we read the whole next (or several next)
min. I/O unit(s). And if it happens to be that we read a data node,
and we've read part of its data, we calculate partial CRC.
So if later we need to check data CRC, we'll only read the rest
of the data from further min. I/O units and continue CRC checking.

This code was a bit messy and buggy. The bug was that it assumed
relatively large min. I/O unit, so that the largest node header
could overlap only one min. I/O unit boundary.

This parch clean-ups the code a bit and fixes this bug.
The patch was not tested on flash with small min. I/O unit, like
NOR-ECC, nut it was tested on NAND with 512 bytes NAND page, so
it at least does not break NAND. It was also tested with mtdram
so it should not break NOR.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 14:05:48 -04:00
David Woodhouse
c7258a4477 [JFFS2] Check for all-zero node headers
Due to a poor choice of CRC32 seed, a node header which is all zeroes
would pass the CRC32 check. Explicitly check for this case, and treat it
as we do a CRC failure.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 11:44:00 +00:00
Yan Burman
3d375d9e0f [JFFS2] replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-10 11:50:34 +00:00
KaiGai Kohei
c7afb0f977 [JFFS2][XATTR] Fix memory leak in POSIX-ACL support
jffs2_clear_acl() which releases acl caches allocated by kmalloc()
was defined but it was never called. Thus, we faced to the risk
of memory leaking.

This patch plugs jffs2_clear_acl() into jffs2_do_clear_inode().
It ensures to release acl cache when inode is cleared.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-02 15:13:46 +01:00
KaiGai Kohei
355ed4e141 [JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref
If xattr_ref is associated with an orphan inode_cache
on filesystem mounting, those xattr_refs are not
released even if this inode_cache is released.

This patch enables to call jffs2_xattr_delete_inode()
for such a irregular inode_cachde too.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:18:30 +01:00
Linus Torvalds
2edc322d42 Merge git://git.infradead.org/~dwmw2/rbtree-2.6
* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node
2006-06-20 14:51:22 -07:00
David Woodhouse
1046d88001 [JFFS2] Check CRC32 on dirent and data nodes each time they're read
Also, make sure dirents are marked REF_UNCHECKED when we 'discover' them
through eraseblock summary.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 22:44:21 +01:00
David Woodhouse
3877f0b6c9 [JFFS2] Don't trust node headers before the CRC is checked.
Especially when summary code is used, we can have in-memory data
structures referencing certain nodes without them actually being readable
on the flash. Discard the nodes gracefully in that case, rather than
triggering a BUG().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 00:05:26 +01:00
David Woodhouse
21f1d5fc59 [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-21 13:17:57 +01:00
Randy Dunlap
fb6a82c94a [PATCH] jffs2: fix printk warnings
Fix printk format warnings in jffs2.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-11 20:12:10 -04:00
Atsushi Nemoto
0ef675d491 [PATCH] mtd: 64 bit fixes
Fix some bugs in mtd/jffs2 on 64bit platform.

The MEMGETBADBLOCK/MEMSETBADBLOCK ioctl are not listed in compat_ioctl.h.

And some variables in jffs2 are declared as uint32_t but used to hold
size_t values.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-09 19:47:37 -08:00
Thomas Gleixner
182ec4eee3 [JFFS2] Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 14:18:56 +01:00
Artem B. Bityutskiy
733802d974 [JFFS2] Debug code simplification, update TODO
Simplify the debugging code further.
Update the TODO list

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:20:33 +01:00
Artem B. Bityutskiy
280562b210 [JFFS2] Calculate CRC check starting point correctly
When data starts from the beginning of NAND page, 'len' must be zero, not
c->wbuf_page.

Thanks to Zoltan Sogor for reporting this problem.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:29:56 +01:00
Artem B. Bityutskiy
3a69e0cd22 [JFFS2] Fix JFFS2 [mc]time handling
From: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:25:59 +01:00
Artem B. Bityutskiy
45ca1b509e [JFFS2] Debug code clean up - step 7
Remove more noisy debugs. Add current->pid to debug messages.
Remove bogus includes.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 19:14:35 +01:00
Artem B. Bityutskiy
3c09133739 [JFFS2] Correct buggy length checks
The previous changes introduced wrong length calculations.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:35:36 +01:00
Artem B. Bityutskiy
392435081e [JFFS2] Debug code clean up - step 6
Remove extra noisy debugs

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:33:09 +01:00
Artem B. Bityutskiy
1e0da3cb6c [JFFS2] Build fragtree in reverse order
Instead of building fragtree starting from node with the smallest version
number, start from the highest. This helps to avoid reading and checking
obsolete nodes.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:22:17 +01:00
Artem B. Bityutskiy
1e900979a7 [JFFS2] Move another fragtree-related function to nodelist.c
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:11:59 +01:00
Andrew Lunn
737b7661e0 [JFFS2] Fix up new debug code for eCos build
The debug code cleanup broke the eCos build.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:06:10 +01:00
Artem B. Bityutskiy
e0d601373b [JFFS2] Debug code clean up - step 5
Replace the D1(printk()) style debugging with the new debug macros

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:01:24 +01:00
Artem B. Bityutskiy
f97117d153 [JFFS2] Move scattered function into related files
Move functions to read inodes into readinode.c
Move functions to handle fragtree and dentry lists into nodelist.[ch]

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 17:50:45 +01:00
Artem B. Bityutskiy
f302cd028c [JFFS2] Namespace clean up
Rename functions to a name matching the functionality.
Remove stall debug code

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 17:17:32 +01:00
Artem B. Bityutskiy
e0c8e42f8f [JFFS2] Debug code clean up - step 3
Various simplifiactions. printk format corrections.
Convert more code to use the new debug functions.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 17:06:49 +01:00
Artem B. Bityutskiy
61a39b6941 [JFFS2] Debug code clean up - step 2
If debugging is disabled, define debugging functions as empty macros, instead
of using Dx() explicitly.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 16:29:43 +01:00
Artem B. Bityutskiy
2b79adcca1 [JFFS2] Use f->target instead of f->dents for symlink target
JFFS2 uses f->dents to store the pointer to the symlink target string (in case
the inode is symlink). This is somewhat ugly to use the same field for
different reasons. Introduce distinct field f->target for this purpose.
Note, f->fragtree, f->dents, f->target may probably be put in a union.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 16:25:55 +01:00