Commit Graph

49 Commits

Author SHA1 Message Date
Linus Torvalds
89f5b7da2a Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP
KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit
557ed1fa26 ("remove ZERO_PAGE") removed
the ZERO_PAGE from the VM mappings, any users of get_user_pages() will
generally now populate the VM with real empty pages needlessly.

We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but
since fault handling no longer uses ZERO_PAGE for new anonymous pages,
we now need to handle that special case in follow_page() instead.

In particular, the removal of ZERO_PAGE effectively removed the core
file writing optimization where we would skip writing pages that had not
been populated at all, and increased memory pressure a lot by allocating
all those useless newly zeroed pages.

This reinstates the optimization by making the unmapped PTE case the
same as for a non-existent page table, which already did this correctly.

While at it, this also fixes the XIP case for follow_page(), where the
caller could not differentiate between the case of a page that simply
could not be used (because it had no "struct page" associated with it)
and a page that just wasn't mapped.

We do that by simply returning an error pointer for pages that could not
be turned into a "struct page *".  The error is arbitrarily picked to be
EFAULT, since that was what get_user_pages() already used for the
equivalent IO-mapped page case.

[ Also removed an impossible test for pte_offset_map_lock() failing:
  that's not how that function works ]

Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-20 11:18:25 -07:00
Nick Piggin
3a902c5f68 mm: fix warning on memory offline
KAMEZAWA Hiroyuki found a warning message in the buffer dirtying code that
is coming from page migration caller.

WARNING: at fs/buffer.c:720 __set_page_dirty+0x330/0x360()
Call Trace:
 [<a000000100015220>] show_stack+0x80/0xa0
 [<a000000100015270>] dump_stack+0x30/0x60
 [<a000000100089ed0>] warn_on_slowpath+0x90/0xe0
 [<a0000001001f8b10>] __set_page_dirty+0x330/0x360
 [<a0000001001ffb90>] __set_page_dirty_buffers+0xd0/0x280
 [<a00000010012fec0>] set_page_dirty+0xc0/0x260
 [<a000000100195670>] migrate_page_copy+0x5d0/0x5e0
 [<a000000100197840>] buffer_migrate_page+0x2e0/0x3c0
 [<a000000100195eb0>] migrate_pages+0x770/0xe00

What was happening is that migrate_page_copy wants to transfer the PG_dirty
bit from old page to new page, so what it would do is set_page_dirty(newpage).
However set_page_dirty() is used to set the entire page dirty, wheras in
this case, only part of the page was dirty, and it also was not uptodate.

Marking the whole page dirty with set_page_dirty would lead to corruption or
unresolvable conditions -- a dirty && !uptodate page and dirty && !uptodate
buffers.

Possibly we could just ClearPageDirty(oldpage); SetPageDirty(newpage);
however in the interests of keeping the change minimal...

Signed-off-by: Nick Piggin <npiggin@suse.de>
Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:55 -07:00
Hugh Dickins
98837c7f82 memcg: fix VM_BUG_ON from page migration
Page migration gave me free_hot_cold_page's VM_BUG_ON page->page_cgroup.
remove_migration_pte was calling mem_cgroup_charge on the new page whenever it
found a swap pte, before it had determined it to be a migration entry.  That
left a surplus reference count on the page_cgroup, so it was still attached
when the page was later freed.

Move that mem_cgroup_charge down to where we're sure it's a migration entry.
We were already under i_mmap_lock or anon_vma->lock, so its GFP_KERNEL was
already inappropriate: change that to GFP_ATOMIC.

It's essential that remove_migration_pte removes all the migration entries,
other crashes follow if not.  So proceed even when the charge fails: normally
it cannot, but after a mem_cgroup_force_empty it might - comment in the code.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:14 -08:00
KAMEZAWA Hiroyuki
ae41be3742 bugfix for memory cgroup controller: migration under memory controller fix
While using memory control cgroup, page-migration under it works as following.
==
 1. uncharge all refs at try to unmap.
 2. charge regs again remove_migration_ptes()
==
This is simple but has following problems.
==
 The page is uncharged and charged back again if *mapped*.
    - This means that cgroup before migration can be different from one after
      migration
    - If page is not mapped but charged as page cache, charge is just ignored
      (because not mapped, it will not be uncharged before migration)
      This is memory leak.
==
This patch tries to keep memory cgroup at page migration by increasing
one refcnt during it. 3 functions are added.

 mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup
 mem_cgroup_end_migration()     --- decrease refcnt of page->page_cgroup
 mem_cgroup_page_migration() --- copy page->page_cgroup from old page to
                                 new page.

During migration
  - old page is under PG_locked.
  - new page is under PG_locked, too.
  - both old page and new page is not on LRU.

These 3 facts guarantee that page_cgroup() migration has no race.

Tested and worked well in x86_64/fake-NUMA box.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:19 -08:00
Balbir Singh
e1a1cd590e Memory controller: make charging gfp mask aware
Nick Piggin pointed out that swap cache and page cache addition routines
could be called from non GFP_KERNEL contexts.  This patch makes the
charging routine aware of the gfp context.  Charging might fail if the
cgroup is over it's limit, in which case a suitable error is returned.

This patch was tested on a Powerpc box.  I am still looking at being able
to test the path, through which allocations happen in non GFP_KERNEL
contexts.

[kamezawa.hiroyu@jp.fujitsu.com: problem with ZONE_MOVABLE]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:19 -08:00
Balbir Singh
8a9f3ccd24 Memory controller: memory accounting
Add the accounting hooks.  The accounting is carried out for RSS and Page
Cache (unmapped) pages.  There is now a common limit and accounting for both.
The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap()
time.  Page cache is accounted at add_to_page_cache(),
__delete_from_page_cache().  Swap cache is also accounted for.

Each page's page_cgroup is protected with the last bit of the
page_cgroup pointer, this makes handling of race conditions involving
simultaneous mappings of a page easier.  A reference count is kept in the
page_cgroup to deal with cases where a page might be unmapped from the RSS
of all tasks, but still lives in the page cache.

Credits go to Vaidyanathan Srinivasan for helping with reference counting work
of the page cgroup.  Almost all of the page cache accounting code has help
from Vaidyanathan Srinivasan.

[hugh@veritas.com: fix swapoff breakage]
[akpm@linux-foundation.org: fix locking]
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: <Valdis.Kletnieks@vt.edu>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:18 -08:00
Shaohua Li
62e1c55300 page migraton: handle orphaned pages
Orphaned page might have fs-private metadata, the page is truncated.  As
the page hasn't mapping, page migration refuse to migrate the page.  It
appears the page is only freed in page reclaim and if zone watermark is
low, the page is never freed, as a result migration always fail.  I thought
we could free the metadata so such page can be freed in migration and make
migration more reliable.

[akpm@linux-foundation.org: go direct to try_to_free_buffers()]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:19 -08:00
Matt Mackall
698dd4ba6b maps4: move is_swap_pte
Move is_swap_pte helper function to swapops.h for use by pagemap code

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:16 -08:00
Gabriel Craciunescu
e9534b3fd7 Typo fixes retrun -> return
Typo fixes retrun -> return

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 02:13:26 +02:00
Pavel Emelyanov
228ebcbe63 Uninline find_task_by_xxx set of functions
The find_task_by_something is a set of macros are used to find task by pid
depending on what kind of pid is proposed - global or virtual one.  All of
them are wrappers above the most generic one - find_task_by_pid_type_ns() -
and just substitute some args for it.

It turned out, that dereferencing the current->nsproxy->pid_ns construction
and pushing one more argument on the stack inline cause kernel text size to
grow.

This patch moves all this stuff out-of-line into kernel/pid.c.  Together
with the next patch it saves a bit less than 400 bytes from the .text
section.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Pavel Emelyanov
b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
KAMEZAWA Hiroyuki
954ffcb35f flush icache before set_pte() on ia64: flush icache at set_pte
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
KAMEZAWA Hiroyuki
97ee052461 flush cache before installing new page at migraton
In migration, a new page should be cache flushed before set_pte() in some
archs which have virtually-tagged cache.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
Christoph Lameter
56bbd65df0 Memoryless nodes: Update memory policy and page migration
Online nodes now may have no memory.  The checks and initialization must
therefore be changed to no longer use the online functions.

This will correctly initialize the interleave on bootup to only target nodes
with memory and will make sys_move_pages return an error when a page is to be
moved to a memoryless node.  Similarly we will get an error if MPOL_BIND and
MPOL_INTERLEAVE is used on a memoryless node.

These are somewhat new semantics.  So far one could specify memoryless nodes
and we would maybe do the right thing and just ignore the node (or we'd do
something strange like with MPOL_INTERLEAVE).  If we want to allow the
specification of memoryless nodes via memory policies then we need to keep
checking for online nodes.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:58 -07:00
Al Viro
9d966d495c mm/migrate.c __user annotation
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:51 -07:00
KAMEZAWA Hiroyuki
989f89c57e fix rcu_read_lock() in page migraton
In migration fallback path, write_page() or lock_page() will be called.
This causes sleep with holding rcu_read_lock().
For avoding that, just do rcu_lock if the page is Anon.(this is enough.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
KAMEZAWA Hiroyuki
3dd9fe8c39 memory unplug: isolate_lru_page fix
release_pages() in mm/swap.c changes page_count() to be 0 without removing
PageLRU flag...

This means isolate_lru_page() can see a page, PageLRU() &&
page_count(page)==0..  This is BUG.  (get_page() will be called against
count=0 page.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
KAMEZAWA Hiroyuki
dc386d4d1e memory unplug: migration by kernel
In usual, migrate_pages(page,,) is called with holding mm->sem by system call.
(mm here is a mm_struct which maps the migration target page.)
This semaphore helps avoiding some race conditions.

But, if we want to migrate a page by some kernel codes, we have to avoid
some races. This patch adds check code for following race condition.

1. A page which page->mapping==NULL can be target of migration. Then, we have
   to check page->mapping before calling try_to_unmap().

2. anon_vma can be freed while page is unmapped, but page->mapping remains as
   it was. We drop page->mapcount to be 0. Then we cannot trust page->mapping.
   So, use rcu_read_lock() to prevent anon_vma pointed by page->mapping from
   being freed during migration.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Mel Gorman
769848c038 Add __GFP_MOVABLE for callers to flag allocations from high memory that may be migrated
It is often known at allocation time whether a page may be migrated or not.
This patch adds a flag called __GFP_MOVABLE and a new mask called
GFP_HIGH_MOVABLE.  Allocations using the __GFP_MOVABLE can be either migrated
using the page migration mechanism or reclaimed by syncing with backing
storage and discarding.

An API function very similar to alloc_zeroed_user_highpage() is added for
__GFP_MOVABLE allocations called alloc_zeroed_user_highpage_movable().  The
flags used by alloc_zeroed_user_highpage() are not changed because it would
change the semantics of an existing API.  After this patch is applied there
are no in-kernel users of alloc_zeroed_user_highpage() so it probably should
be marked deprecated if this patch is merged.

Note that this patch includes a minor cleanup to the use of __GFP_ZERO in
shmem.c to keep all flag modifications to inode->mapping in the
shmem_dir_alloc() helper function.  This clean-up suggestion is courtesy of
Hugh Dickens.

Additional credit goes to Christoph Lameter and Linus Torvalds for shaping the
concept.  Credit to Hugh Dickens for catching issues with shmem swap vector
and ramfs allocations.

[akpm@linux-foundation.org: build fix]
[hugh@veritas.com: __GFP_ZERO cleanup]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Christoph Lameter
0e8c7d0fd5 page migration: fix NR_FILE_PAGES accounting
NR_FILE_PAGES must be accounted for depending on the zone that the page
belongs to.  If we replace the page in the radix tree then we may have to
shift the count to another zone.

Suggested-by: Ethan Solomita <solo@google.com>
Eventually-typed-in-by: Christoph Lameter <clameter@sgi.com>
Cc: Martin Bligh <mbligh@mbligh.org>
Cc: <stable@kernel.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:08 -07:00
Christoph Lameter
0dc952dc3e [PATCH] Page migration: Fix vma flag checking
Currently we do not check for vma flags if sys_move_pages is called to move
individual pages.  If sys_migrate_pages is called to move pages then we
check for vm_flags that indicate a non migratable vma but that still
includes VM_LOCKED and we can migrate mlocked pages.

Extract the vma_migratable check from mm/mempolicy.c, fix it and put it
into migrate.h so that is can be used from both locations.

Problem was spotted by Lee Schermerhorn

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 07:57:51 -08:00
Nick Piggin
7cf9c2c76c [PATCH] radix-tree: RCU lockless readside
Make radix tree lookups safe to be performed without locks.  Readers are
protected against nodes being deleted by using RCU based freeing.  Readers
are protected against new node insertion by using memory barriers to ensure
the node itself will be properly written before it is visible in the radix
tree.

Each radix tree node keeps a record of their height (above leaf nodes).
This height does not change after insertion -- when the radix tree is
extended, higher nodes are only inserted in the top.  So a lookup can take
the pointer to what is *now* the root node, and traverse down it even if
the tree is concurrently extended and this node becomes a subtree of a new
root.

"Direct" pointers (tree height of 0, where root->rnode points directly to
the data item) are handled by using the low bit of the pointer to signal
whether rnode is a direct pointer or a pointer to a radix tree node.

When a reader wants to traverse the next branch, they will take a copy of
the pointer.  This pointer will be either NULL (and the branch is empty) or
non-NULL (and will point to a valid node).

[akpm@osdl.org: cleanups]
[Lee.Schermerhorn@hp.com: bugfixes, comments, simplifications]
[clameter@sgi.com: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Stephen Rothwell
8ce08464d2 [PATCH] Fix sys_move_pages when a NULL node list is passed
sys_move_pages() uses vmalloc() to allocate an array of structures that is
fills with information passed from user mode and then passes to
do_stat_pages() (in the case the node list is NULL).  do_stat_pages()
depends on a marker in the node field of the structure to decide how large
the array is and this marker is correctly inserted into the last element of
the array.  However, vmalloc() doesn't zero the memory it allocates and if
the user passes NULL for the node list, then the node fields are not filled
in (except for the end marker).  If the memory the vmalloc() returned
happend to have a word with the marker value in it in just the right place,
do_pages_stat will fail to fill the status field of part of the array and
we will return (random) kernel data to user mode.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:59 -08:00
David Howells
9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
David Howells
b398f6bff9 [PATCH] BLOCK: Stop fallback_migrate_page() from using page_has_buffers() [try #6]
Stop fallback_migrate_page() from using page_has_buffers() since that might not
be available.  Use PagePrivate() instead since that's more general.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:31:20 +02:00
Christoph Lameter
980128f223 [PATCH] Define easier to handle GFP_THISNODE
In many places we will need to use the same combination of flags.  Specify
a single GFP_THISNODE definition for ease of use in gfp.h.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:50 -07:00
Christoph Lameter
3d99cfb5f4 [PATCH] sys_move_pages: Do not fall back to other nodes
If the user specified a node where we should move the page to then we
really do not want any other node.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:50 -07:00
Christoph Lameter
e6a1530d69 [PATCH] Allow migration of mlocked pages
Hugh clarified the role of VM_LOCKED.  So we can now implement page
migration for mlocked pages.

Allow the migration of mlocked pages.  This means that try_to_unmap must
unmap mlocked pages in the migration case.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:55 -07:00
Christoph Lameter
7b2259b3e5 [PATCH] page migration: Support a vma migration function
Hooks for calling vma specific migration functions

With this patch a vma may define a vma->vm_ops->migrate function.  That
function may perform page migration on its own (some vmas may not contain page
structs and therefore cannot be handled by regular page migration.  Pages in a
vma may require special preparatory treatment before migration is possible
etc) .  Only mmap_sem is held when the migration function is called.  The
migrate() function gets passed two sets of nodemasks describing the source and
the target of the migration.  The flags parameter either contains

MPOL_MF_MOVE	which means that only pages used exclusively by
		the specified mm should be moved

or

MPOL_MF_MOVE_ALL which means that pages shared with other processes
		should also be moved.

The migration function returns 0 on success or an error condition.  An error
condition will prevent regular page migration from occurring.

On its own this patch cannot be included since there are no users for this
functionality.  But it seems that the uncached allocator will need this
functionality at some point.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:55 -07:00
David Quigley
86c3a7645c [PATCH] SELinux: add security_task_movememory calls to mm code
This patch inserts security_task_movememory hook calls into memory management
code to enable security modules to mediate this operation between tasks.

Since the last posting, the hook has been renamed following feedback from
Christoph Lameter.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:54 -07:00
Christoph Lameter
742755a1d8 [PATCH] page migration: sys_move_pages(): support moving of individual pages
move_pages() is used to move individual pages of a process. The function can
be used to determine the location of pages and to move them onto the desired
node. move_pages() returns status information for each page.

long move_pages(pid, number_of_pages_to_move,
		addresses_of_pages[],
		nodes[] or NULL,
		status[],
		flags);

The addresses of pages is an array of void * pointing to the
pages to be moved.

The nodes array contains the node numbers that the pages should be moved
to. If a NULL is passed instead of an array then no pages are moved but
the status array is updated. The status request may be used to determine
the page state before issuing another move_pages() to move pages.

The status array will contain the state of all individual page migration
attempts when the function terminates. The status array is only valid if
move_pages() completed successfullly.

Possible page states in status[]:

0..MAX_NUMNODES	The page is now on the indicated node.

-ENOENT		Page is not present

-EACCES		Page is mapped by multiple processes and can only
		be moved if MPOL_MF_MOVE_ALL is specified.

-EPERM		The page has been mlocked by a process/driver and
		cannot be moved.

-EBUSY		Page is busy and cannot be moved. Try again later.

-EFAULT		Invalid address (no VMA or zero page).

-ENOMEM		Unable to allocate memory on target node.

-EIO		Unable to write back page. The page must be written
		back in order to move it since the page is dirty and the
		filesystem does not provide a migration function that
		would allow the moving of dirty pages.

-EINVAL		A dirty page cannot be moved. The filesystem does not provide
		a migration function and has no ability to write back pages.

The flags parameter indicates what types of pages to move:

MPOL_MF_MOVE	Move pages that are only mapped by the process.

MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes.
		Requires sufficient capabilities.

Possible return codes from move_pages()

-ENOENT		No pages found that would require moving. All pages
		are either already on the target node, not present, had an
		invalid address or could not be moved because they were
		mapped by multiple processes.

-EINVAL		Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt
		to migrate pages in a kernel thread.

-EPERM		MPOL_MF_MOVE_ALL specified without sufficient priviledges.
		or an attempt to move a process belonging to another user.

-EACCES		One of the target nodes is not allowed by the current cpuset.

-ENODEV		One of the target nodes is not online.

-ESRCH		Process does not exist.

-E2BIG		Too many pages to move.

-ENOMEM		Not enough memory to allocate control array.

-EFAULT		Parameters could not be accessed.

A test program for move_pages() may be found with the patches
on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3

From: Christoph Lameter <clameter@sgi.com>

  Detailed results for sys_move_pages()

  Pass a pointer to an integer to get_new_page() that may be used to
  indicate where the completion status of a migration operation should be
  placed.  This allows sys_move_pags() to report back exactly what happened to
  each page.

  Wish there would be a better way to do this. Looks a bit hacky.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter
95a402c384 [PATCH] page migration: use allocator function for migrate_pages()
Instead of passing a list of new pages, pass a function to allocate a new
page.  This allows the correct placement of MPOL_INTERLEAVE pages during page
migration.  It also further simplifies the callers of migrate pages.
migrate_pages() becomes similar to migrate_pages_to() so drop
migrate_pages_to().  The batching of new page allocations becomes unnecessary.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter
aaa994b300 [PATCH] page migration: handle freeing of pages in migrate_pages()
Do not leave pages on the lists passed to migrate_pages().  Seems that we will
not need any postprocessing of pages.  This will simplify the handling of
pages by the callers of migrate_pages().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter
e24f0b8f76 [PATCH] page migration: simplify migrate_pages()
Currently migrate_pages() is mess with lots of goto.  Extract two functions
from migrate_pages() and get rid of the gotos.

Plus we can just unconditionally set the locked bit on the new page since we
are the only one holding a reference.  Locking is to stop others from
accessing the page once we establish references to the new page.

Remove the list_del from move_to_lru in order to have finer control over list
processing.

[akpm@osdl.org: add debug check]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:52 -07:00
Christoph Lameter
04e62a29bf [PATCH] More page migration: use migration entries for file pages
This implements the use of migration entries to preserve ptes of file backed
pages during migration.  Processes can therefore be migrated back and forth
without loosing their connection to pagecache pages.

Note that we implement the migration entries only for linear mappings.
Nonlinear mappings still require the unmapping of the ptes for migration.

And another writepage() ugliness shows up.  writepage() can drop the page
lock.  Therefore we have to remove migration ptes before calling writepages()
in order to avoid having migration entries point to unlocked pages.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:51 -07:00
Christoph Lameter
442c9137de [PATCH] More page migration: do not inc/dec rss counters
If we install a migration entry then the rss not really decreases since the
page is just moved somewhere else.  We can save ourselves the work of
decrementing and later incrementing which will just eventually cause cacheline
bouncing.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:51 -07:00
Christoph Lameter
6c5240ae7f [PATCH] Swapless page migration: modify core logic
Use the migration entries for page migration

This modifies the migration code to use the new migration entries.  It now
becomes possible to migrate anonymous pages without having to add a swap
entry.

We add a couple of new functions to replace migration entries with the proper
ptes.

We cannot take the tree_lock for migrating anonymous pages anymore.  However,
we know that we hold the only remaining reference to the page when the page
count reaches 1.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
d75a0fcda2 [PATCH] Swapless page migration: rip out swap based logic
Rip the page migration logic out.

Remove all code that has to do with swapping during page migration.

This also guts the ability to migrate pages to swap.  No one used that so lets
let it go for good.

Page migration should be a bit broken after this patch.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
0697212a41 [PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes

We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.

The VM is modified to handle the migration entries.  migration entries can
only be encountered when the page they are pointing to is locked.  This limits
the number of places one has to fix.  We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.

We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock.  This allows us to effectively stop all accesses
to apge.

Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c

From: Hugh Dickins <hugh@veritas.com>

  Several times while testing swapless page migration (I've no NUMA, just
  hacking it up to migrate recklessly while running load), I've hit the
  BUG_ON(!PageLocked(p)) in migration_entry_to_page.

  This comes from an orphaned migration entry, unrelated to the current
  correctly locked migration, but hit by remove_anon_migration_ptes as it
  checks an address in each vma of the anon_vma list.

  Such an orphan may be left behind if an earlier migration raced with fork:
  copy_one_pte can duplicate a migration entry from parent to child, after
  remove_anon_migration_ptes has checked the child vma, but before it has
  removed it from the parent vma.  (If the process were later to fault on this
  orphaned entry, it would hit the same BUG from migration_entry_wait.)

  This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
  not.  There's no such problem with file pages, because vma_prio_tree_add
  adds child vma after parent vma, and the page table locking at each end is
  enough to serialize.  Follow that example with anon_vma: add new vmas to the
  tail instead of the head.

  (There's no corresponding problem when inserting migration entries,
  because a missed pte will leave the page count and mapcount high, which is
  allowed for.  And there's no corresponding problem when migrating via swap,
  because a leftover swap entry will be correctly faulted.  But the swapless
  method has no refcounting of its entries.)

From: Ingo Molnar <mingo@elte.hu>

  pte_unmap_unlock() takes the pte pointer as an argument.

From: Hugh Dickins <hugh@veritas.com>

  Several times while testing swapless page migration, gcc has tried to exec
  a pointer instead of a string: smells like COW mappings are not being
  properly write-protected on fork.

  The protection in copy_one_pte looks very convincing, until at last you
  realize that the second arg to make_migration_entry is a boolean "write",
  and SWP_MIGRATION_READ is 30.

  Anyway, it's better done like in change_pte_range, using
  is_write_migration_entry and make_migration_entry_read.

From: Hugh Dickins <hugh@veritas.com>

  Remove unnecessary obfuscation from sys_swapon's range check on swap type,
  which blew up causing memory corruption once swapless migration made
  MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
8351a6e478 [PATCH] page migration cleanup: move fallback handling into special function
Move the fallback code into a new fallback function and make the function
behave like any other migration function.  This requires retaking the lock if
pageout() drops it.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
2d1db3b117 [PATCH] page migration cleanup: pass "mapping" to migration functions
Change handling of address spaces.

Pass a pointer to the address space in which the page is migrated to all
migration function.  This avoids repeatedly having to retrieve the address
space pointer from the page and checking it for validity.  The old page
mapping will change once migration has gone to a certain step, so it is less
confusing to have the pointer always available.

Move the setting of the mapping and index for the new page into
migrate_pages().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
c3fcf8a5da [PATCH] page migration cleanup: extract try_to_unmap from migration functions
Extract try_to_unmap and rename remove_references -> move_mapping

try_to_unmap() may significantly change the page state by for example setting
the dirty bit.  It is therefore best to unmap in migrate_pages() before
calling any migration functions.

migrate_page_remove_references() will then only move the new page in place of
the old page in the mapping.  Rename the function to
migrate_page_move_mapping().

This allows us to get rid of the special unmapping for the fallback path.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
5b5c7120e2 [PATCH] page migration cleanup: drop nr_refs in remove_references()
Drop nr_refs parameter from migrate_page_remove_references()

The nr_refs parameter is not really useful since the number of remaining
references is always

1 for anonymous pages without a mapping
2 for pages with a mapping
3 for pages with a mapping and PagePrivate set.

Remove the early check for the number of references since we are checking
page_mapcount() earlier.  Ultimately only the refcount matters after the
tree_lock has been obtained.

Signed-off-by: Christoph Lameter <clameter@sgi.coim>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
e7340f7330 [PATCH] page migration cleanup: remove useless definitions
Remove the export for migrate_page_remove_references() and migrate_page_copy()
that are unlikely to be used directly by filesystems implementing migration.
The export was useful when buffer_migrate_page() lived in fs/buffer.c but it
has now been moved to migrate.c in the migration reorg.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
1d8b85ccf1 [PATCH] page migration cleanup: group functions
Reorder functions in migrate.c.  Group all migration functions for struct
address_space_operations together.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:50 -07:00
Christoph Lameter
4c28f81193 [PATCH] page migration: Fix fallback behavior for dirty pages
Currently we check PageDirty() in order to make the decision to swap out
the page.  However, the dirty information may be only be contained in the
ptes pointing to the page.  We need to first unmap the ptes before checking
for PageDirty().  If unmap is successful then the page count of the page
will also be decreased so that pageout() works properly.

This is a fix necessary for 2.6.17.  Without this fix we may migrate dirty
pages for filesystems without migration functions.  Filesystems may keep
pointers to dirty pages.  Migration of dirty pages can result in the
filesystem keeping pointers to freed pages.

Unmapping is currently not be separated out from removing all the
references to a page and moving the mapping.  Therefore try_to_unmap will
be called again in migrate_page() if the writeout is successful.  However,
it wont do anything since the ptes are already removed.

The coming updates to the page migration code will restructure the code
so that this is no longer necessary.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:45 -07:00
Adrian Bunk
64a3ca5f7e [PATCH] mm/migrate.c: don't export a static function
EXPORT_SYMBOL'ing of a static function is not a good idea.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:33 -07:00
Christoph Lameter
e23ca00bf1 [PATCH] Some page migration fixups
- Remove sparse comment

- Remove duplicated include

- Return the correct error condition in migrate_page_remove_references().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:32 -07:00
Christoph Lameter
b20a35035f [PATCH] page migration reorg
Centralize the page migration functions in anticipation of additional
tinkering.  Creates a new file mm/migrate.c

1. Extract buffer_migrate_page() from fs/buffer.c

2. Extract central migration code from vmscan.c

3. Extract some components from mempolicy.c

4. Export pageout() and remove_from_swap() from vmscan.c

5. Make it possible to configure NUMA systems without page migration
   and non-NUMA systems with page migration.

I had to so some #ifdeffing in mempolicy.c that may need a cleanup.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:06 -08:00