Commit Graph

30365 Commits

Author SHA1 Message Date
Linus Torvalds c5b440951a Make the GCC 9 warning for sub struct memset go away.
GCC 9 now warns about calling memset() on partial structures when it
 goes across multiple fields. This adds a helper for the place in
 tracing that does this type of clearing of a structure.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXOrlfhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qoDhAP4mogBm0JjJ1LWr8RX2/X7qFm0x1zLz
 5Mk0QKfeRP3MYgEAl2mV/HeFp7aMxEY2CKy0LslmaXPhamPx1r0LlfMgIws=
 =drP3
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing warning fix from Steven Rostedt:
 "Make the GCC 9 warning for sub struct memset go away.

  GCC 9 now warns about calling memset() on partial structures when it
  goes across multiple fields. This adds a helper for the place in
  tracing that does this type of clearing of a structure"

* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Silence GCC 9 array bounds warning
2019-05-26 13:49:40 -07:00
Miguel Ojeda 0c97bf863e tracing: Silence GCC 9 array bounds warning
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.

Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:

    In function 'memset',
        inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
    ./include/linux/string.h:344:9: warning: '__builtin_memset' offset
    [8505, 8560] from the object at 'iter' is out of the bounds of
    referenced subobject 'seq' with type 'struct trace_seq' at offset
    4368 [-Warray-bounds]
      344 |  return __builtin_memset(p, c, size);
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.

Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.

Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com

Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-25 23:04:30 -04:00
Linus Torvalds a2c48d98fc Tom Zanussi sent me some small fixes and cleanups to the histogram
code and I forgot to incorporate them.
 
 I also added a small clean up patch that was sent to me a while ago
 and I just noticed it.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXOixqRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qlPsAQCmNzno+SJMXLLIojZ80pqs9PqLqIrW
 iBopFNihRBAkxgEAle8Pvr53S4R/Hjn6j++kxBm/uWaEfICOzyqcSyqxlQA=
 =Sin+
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Tom Zanussi sent me some small fixes and cleanups to the histogram
  code and I forgot to incorporate them.

  I also added a small clean up patch that was sent to me a while ago
  and I just noticed it"

* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kernel/trace/trace.h: Remove duplicate header of trace_seq.h
  tracing: Add a check_val() check before updating cond_snapshot() track_val
  tracing: Check keys for variable references in expressions too
  tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
2019-05-25 10:08:14 -07:00
Linus Torvalds 86c2f5d653 SPDX update for 5.2-rc2, round 2
Here is another set of reviewed patches that adds SPDX tags to different
 kernel files, based on a set of rules that are being used to parse the
 comments to try to determine that the license of the file is
 "GPL-2.0-or-later".  Only the "obvious" versions of these matches are
 included here, a number of "non-obvious" variants of text have been
 found but those have been postponed for later review and analysis.
 
 These patches have been out for review on the linux-spdx@vger mailing
 list, and while they were created by automatic tools, they were
 hand-verified by a bunch of different people, all whom names are on the
 patches are reviewers.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOgmlw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk4rACfRqxGOGVLR/t6E9dDzOZRAdEz/mYAoJLZmziY
 0YlSSSPtP5HI6JDh65Ng
 =HXQb
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pule more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later".

  Only the "obvious" versions of these matches are included here, a
  number of "non-obvious" variants of text have been found but those
  have been postponed for later review and analysis.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
  ...
2019-05-24 14:31:58 -07:00
Waiman Long 51816e9e11 locking/lock_events: Use this_cpu_add() when necessary
The kernel test robot has reported that the use of __this_cpu_add()
causes bug messages like:

  BUG: using __this_cpu_add() in preemptible [00000000] code: ...

Given the imprecise nature of the count and the possibility of resetting
the count and doing the measurement again, this is not really a big
problem to use the unprotected __this_cpu_*() functions.

To make the preemption checking code happy, the this_cpu_*() functions
will be used if CONFIG_DEBUG_PREEMPT is defined.

The imprecise nature of the locking counts are also documented with
the suggestion that we should run the measurement a few times with the
counts reset in between to get a better picture of what is going on
under the hood.

Fixes: a8654596f0 ("locking/rwsem: Enable lock event counting")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-24 14:17:18 -07:00
Thomas Gleixner 6ff3f917e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 38
Based on 1 normalized pattern(s):

  this file is released under the gplv2 and any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.732920462@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:11 +02:00
Thomas Gleixner b4d0d230cc treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public licence as published by
  the free software foundation either version 2 of the licence or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 114 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:11 +02:00
Jagadeesh Pagadala 4eebe38a37 kernel/trace/trace.h: Remove duplicate header of trace_seq.h
Remove duplicate header which is included twice.

Link: http://lkml.kernel.org/r/1553725186-41442-1-git-send-email-jagdsh.linux@gmail.com

Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Jagadeesh Pagadala <jagdsh.linux@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-22 15:37:41 -04:00
Linus Torvalds 2c1212de6f SPDX update for 5.2-rc2, round 1
Here are series of patches that add SPDX tags to different kernel files,
 based on two different things:
   - SPDX entries are added to a bunch of files that we missed a year ago
     that do not have any license information at all.
 
     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the last
     big sweep, or they were Makefile/Kconfig files, which we didn't
     touch last time.
 
   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself.  Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.
 
 These patches have been out for review on the linux-spdx@vger mailing
 list, and while they were created by automatic tools, they were
 hand-verified by a bunch of different people, all whom names are on the
 patches are reviewers.
 
 The reason for these "large" patches is if we were to continue to
 progress at the current rate of change in the kernel, adding license
 tags to individual files in different subsystems, we would be finished
 in about 10 years at the earliest.
 
 There will be more series of these types of patches coming over the next
 few weeks as the tools and reviewers crunch through the more "odd"
 variants of how to say "GPLv2" that developers have come up with over
 the years, combined with other fun oddities (GPL + a BSD disclaimer?)
 that are being unearthed, with the goal for the whole kernel to be
 cleaned up.
 
 These diffstats are not small, 3840 files are touched, over 10k lines
 removed in just 24 patches.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
 1KwtfRnMtG6dk/XaS7H7
 =O9lH
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull SPDX update from Greg KH:
 "Here is a series of patches that add SPDX tags to different kernel
  files, based on two different things:

   - SPDX entries are added to a bunch of files that we missed a year
     ago that do not have any license information at all.

     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the
     last big sweep, or they were Makefile/Kconfig files, which we
     didn't touch last time.

   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself. Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers.

  The reason for these "large" patches is if we were to continue to
  progress at the current rate of change in the kernel, adding license
  tags to individual files in different subsystems, we would be finished
  in about 10 years at the earliest.

  There will be more series of these types of patches coming over the
  next few weeks as the tools and reviewers crunch through the more
  "odd" variants of how to say "GPLv2" that developers have come up with
  over the years, combined with other fun oddities (GPL + a BSD
  disclaimer?) that are being unearthed, with the goal for the whole
  kernel to be cleaned up.

  These diffstats are not small, 3840 files are touched, over 10k lines
  removed in just 24 patches"

* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
  ...
2019-05-21 12:33:38 -07:00
Tom Zanussi 9b2ca371b1 tracing: Add a check_val() check before updating cond_snapshot() track_val
Without this check a snapshot is taken whenever a bucket's max is hit,
rather than only when the global max is hit, as it should be.

Before:

  In this example, we do a first run of the workload (cyclictest),
  examine the output, note the max ('triggering value') (347), then do
  a second run and note the max again.

  In this case, the max in the second run (39) is below the max in the
  first run, but since we haven't cleared the histogram, the first max
  is still in the histogram and is higher than any other max, so it
  should still be the max for the snapshot.  It isn't however - the
  value should still be 347 after the second run.

  # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
  # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2143 } hitcount:        199
    max:         44  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2145 } hitcount:       1325
    max:         38  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2144 } hitcount:       1982
    max:        347  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  Snapshot taken (see tracing/snapshot).  Details:
      triggering value { onmax($wakeup_lat) }:        347
      triggered by event with key: { next_pid:       2144 }

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2143 } hitcount:        199
    max:         44  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2148 } hitcount:        199
    max:         16  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/1

  { next_pid:       2145 } hitcount:       1325
    max:         38  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2150 } hitcount:       1326
    max:         39  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2144 } hitcount:       1982
    max:        347  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  { next_pid:       2149 } hitcount:       1983
    max:        130  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/0

  Snapshot taken (see tracing/snapshot).  Details:
    triggering value { onmax($wakeup_lat) }:    39
    triggered by event with key: { next_pid:       2150 }

After:

  In this example, we do a first run of the workload (cyclictest),
  examine the output, note the max ('triggering value') (375), then do
  a second run and note the max again.

  In this case, the max in the second run is still 375, the highest in
  any bucket, as it should be.

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2072 } hitcount:        200
    max:         28  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/5

  { next_pid:       2074 } hitcount:       1323
    max:        375  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2073 } hitcount:       1980
    max:        153  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  Snapshot taken (see tracing/snapshot).  Details:
    triggering value { onmax($wakeup_lat) }:        375
    triggered by event with key: { next_pid:       2074 }

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2101 } hitcount:        199
    max:         49  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  { next_pid:       2072 } hitcount:        200
    max:         28  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/5

  { next_pid:       2074 } hitcount:       1323
    max:        375  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2103 } hitcount:       1325
    max:         74  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2073 } hitcount:       1980
    max:        153  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  { next_pid:       2102 } hitcount:       1981
    max:         84  next_prio:         19  next_comm: cyclictest
    prev_pid:         12  prev_prio:        120  prev_comm: kworker/0:1

  Snapshot taken (see tracing/snapshot).  Details:
    triggering value { onmax($wakeup_lat) }:        375
    triggered by event with key: { next_pid:       2074 }

Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com

Cc: stable@vger.kernel.org
Fixes: a3785b7eca ("tracing: Add hist trigger snapshot() action")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-21 12:48:07 -04:00
Tom Zanussi c8d94a1878 tracing: Check keys for variable references in expressions too
There's an existing check for variable references in keys, but it
doesn't go far enough.  It checks whether a key field is a variable
reference but doesn't check whether it's an expression containing
variable references, which can cause the same problems for callers.

Use the existing field_has_hist_vars() function rather than a direct
top-level flag check to catch all possible variable references.

Link: http://lkml.kernel.org/r/e8c3d3d53db5ca90ceea5a46e5413103a6902fc7.1555597045.git.tom.zanussi@linux.intel.com

Cc: stable@vger.kernel.org
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-21 12:46:32 -04:00
Tom Zanussi 55267c88c0 tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
hist_field_var_ref() is an implementation of hist_field_fn_t(), which
can be called with a null tracing_map_elt elt param when assembling a
key in event_hist_trigger().

In the case of hist_field_var_ref() this doesn't make sense, because a
variable can only be resolved by looking it up using an already
assembled key i.e. a variable can't be used to assemble a key since
the key is required in order to access the variable.

Upper layers should prevent the user from constructing a key using a
variable in the first place, but in case one slips through, it
shouldn't cause a NULL pointer dereference.  Also if one does slip
through, we want to know about it, so emit a one-time warning in that
case.

Link: http://lkml.kernel.org/r/64ec8dc15c14d305295b64cdfcc6b2b9dd14753f.1555597045.git.tom.zanussi@linux.intel.com

Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-21 12:43:49 -04:00
Thomas Gleixner 7170066ecd treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it would be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 6 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154043.007767574@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:52:39 +02:00
Thomas Gleixner 1ccea77e2a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:45 +02:00
Thomas Gleixner d6cd1e9b9f treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not you can access it online at http www gnu
  org licenses gpl 2 0 html

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.430943677@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:40 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Linus Torvalds 78e0365184 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
    Cheng.

 3) Orphan NFC, we'll take the patches directly into my tree. From
    Johannes Berg.

 4) We can't recycle cloned TCP skbs, from Eric Dumazet.

 5) Some flow dissector bpf test fixes, from Stanislav Fomichev.

 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.

 7) Fix some potential fib6 leaks, from Eric Dumazet.

 8) Fix a _decode_session4 uninitialized memory read bug fix that got
    lost in a merge. From Florian Westphal.

 9) Fix ipv6 source address routing wrt. exception route entries, from
    Wei Wang.

10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
    driver, fix from Tariq Toukan.

11) Clean up botched merge on netfilter kselftest, from Florian
    Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
  of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
  net: fix kernel-doc warnings for socket.c
  net: Treat sock->sk_drops as an unsigned int when printing
  kselftests: netfilter: fix leftover net/net-next merge conflict
  mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
  mlxsw: core: Prevent QSFP module initialization for old hardware
  vsock/virtio: Initialize core virtio vsock before registering the driver
  net/mlx5e: Fix possible modify header actions memory leak
  net/mlx5e: Fix no rewrite fields with the same match
  net/mlx5e: Additional check for flow destination comparison
  net/mlx5e: Add missing ethtool driver info for representors
  net/mlx5e: Fix number of vports for ingress ACL configuration
  net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
  net/mlx5e: Fix wrong xmit_more application
  net/mlx5: Fix peer pf disable hca command
  net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
  net/mlx5: Add meaningful return codes to status_to_err function
  net/mlx5: Imply MLXFW in mlx5_core
  Revert "tipc: fix modprobe tipc failed after switch order of device registration"
  vsock/virtio: free packets during the socket release
  ...
2019-05-20 08:21:07 -07:00
Linus Torvalds cb6f8739fb Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation
2019-05-19 12:15:32 -07:00
Linus Torvalds d9351ea14d Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...
2019-05-19 10:58:45 -07:00
Feng Tang de6da1e8bc panic: add an option to replay all the printk message in buffer
Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().

Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .

[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
  Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
  Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18 15:52:26 -07:00
Linus Torvalds 5f3ab27b9e Merge branch 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
 "The cgroup2 freezer pulled in this cycle broke strace. This pull
  request includes a workaround for the problem.

  It's not a complete fix in that it may cause spurious frozen state
  flip-flops which is fairly minor. Will push a full fix once it's
  ready"

* 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  signal: unconditionally leave the frozen state in ptrace_stop()
2019-05-16 19:01:23 -07:00
Chenbo Feng e547ff3f80 bpf: relax inode permission check for retrieving bpf program
For iptable module to load a bpf program from a pinned location, it
only retrieve a loaded program and cannot change the program content so
requiring a write permission for it might not be necessary.
Also when adding or removing an unrelated iptable rule, it might need to
flush and reload the xt_bpf related rules as well and triggers the inode
permission check. It might be better to remove the write premission
check for the inode so we won't need to grant write access to all the
processes that flush and restore iptables rules.

Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-16 11:31:49 -07:00
Linus Torvalds b2c3dda6f8 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time fixes from Ingo Molnar:
 "A TIA adjtimex interface extension, and a POSIX compliance ABI fix for
  timespec64 users"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Allow TAI-UTC offset to be set to zero
  y2038: Make CONFIG_64BIT_TIME unconditional
2019-05-16 11:00:20 -07:00
Linus Torvalds f57d7715d7 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
 "A single rwsem fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Prevent decrement of reader count before increment
2019-05-16 10:54:19 -07:00
Roman Gushchin 05b2892637 signal: unconditionally leave the frozen state in ptrace_stop()
Alex Xu reported a regression in strace, caused by the introduction of
the cgroup v2 freezer. The regression can be reproduced by stracing
the following simple program:

  #include <unistd.h>

  int main() {
      write(1, "a", 1);
      return 0;
  }

An attempt to run strace ./a.out leads to the infinite loop:
  [ pre-main omitted ]
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  [ repeats forever ]

The problem occurs because the traced task leaves ptrace_stop()
(and the signal handling loop) with the frozen bit set. So let's
call cgroup_leave_frozen(true) unconditionally after sleeping
in ptrace_stop().

With this patch applied, strace works as expected:
  [ pre-main omitted ]
  write(1, "a", 1)                        = 1
  exit_group(0)                           = ?
  +++ exited with 0 +++

Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2019-05-16 10:43:58 -07:00
David S. Miller c7d5ec26ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-05-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a use after free in __dev_map_entry_free(), from Eric.

2) Several sockmap related bug fixes: a splat in strparser if
   it was never initialized, remove duplicate ingress msg list
   purging which can race, fix msg->sg.size accounting upon
   skb to msg conversion, and last but not least fix a timeout
   bug in tcp_bpf_wait_data(), from John.

3) Fix LRU map to avoid messing with eviction heuristics upon
   syscall lookup, e.g. map walks from user space side will
   then lead to eviction of just recently created entries on
   updates as it would mark all map entries, from Daniel.

4) Don't bail out when libbpf feature probing fails. Also
   various smaller fixes to flow_dissector test, from Stanislav.

5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-15 18:28:44 -07:00
Linus Torvalds d2d8b14604 The major changes in this tracing update includes:
- Removing of non-DYNAMIC_FTRACE from 32bit x86
 
  - Removing of mcount support from x86
 
  - Emulating a call from int3 on x86_64, fixes live kernel patching
 
  - Consolidated Tracing Error logs file
 
 Minor updates:
 
  - Removal of klp_check_compiler_support()
 
  - kdb ftrace dumping output changes
 
  - Accessing and creating ftrace instances from inside the kernel
 
  - Clean up of #define if macro
 
  - Introduction of TRACE_EVENT_NOP() to disable trace events based on config
    options
 
 And other minor fixes and clean ups
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXNxMZxQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qq4PAP44kP6VbwL8CHyI2A3xuJ6Hwxd+2Z2r
 ip66RtzyJ+2iCgEA2QCuWUlEt2bLpF9a8IQ4N9tWenSeW2i7gunPb+tioQw=
 =RVQo
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "The major changes in this tracing update includes:

   - Removal of non-DYNAMIC_FTRACE from 32bit x86

   - Removal of mcount support from x86

   - Emulating a call from int3 on x86_64, fixes live kernel patching

   - Consolidated Tracing Error logs file

  Minor updates:

   - Removal of klp_check_compiler_support()

   - kdb ftrace dumping output changes

   - Accessing and creating ftrace instances from inside the kernel

   - Clean up of #define if macro

   - Introduction of TRACE_EVENT_NOP() to disable trace events based on
     config options

  And other minor fixes and clean ups"

* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  x86: Hide the int3_emulate_call/jmp functions from UML
  livepatch: Remove klp_check_compiler_support()
  ftrace/x86: Remove mcount support
  ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
  tracing: Simplify "if" macro code
  tracing: Fix documentation about disabling options using trace_options
  tracing: Replace kzalloc with kcalloc
  tracing: Fix partial reading of trace event's id file
  tracing: Allow RCU to run between postponed startup tests
  tracing: Fix white space issues in parse_pred() function
  tracing: Eliminate const char[] auto variables
  ring-buffer: Fix mispelling of Calculate
  tracing: probeevent: Fix to make the type of $comm string
  tracing: probeevent: Do not accumulate on ret variable
  tracing: uprobes: Re-enable $comm support for uprobe events
  ftrace/x86_64: Emulate call function while updating in breakpoint handler
  x86_64: Allow breakpoints to emulate call instructions
  x86_64: Add gap to int3 to allow for call emulation
  tracing: kdb: Allow ftdump to skip all but the last few entries
  tracing: Add trace_total_entries() / trace_total_entries_cpu()
  ...
2019-05-15 16:05:47 -07:00
Stephen Rothwell 89963adcdb kernel/compat.c: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch aims to suppress 3 missing-break-in-switch false positives
on some architectures.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-15 08:16:14 -07:00
Linus Torvalds 1064d85773 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - a couple of hotfixes

 - almost all of the rest of MM

 - lib/ updates

 - binfmt_elf updates

 - autofs updates

 - quite a lot of misc fixes and updates
    - reiserfs, fatfs
    - signals
    - exec
    - cpumask
    - rapidio
    - sysctl
    - pids
    - eventfd
    - gcov
    - panic
    - pps

 - gdb script updates

 - ipc updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
  mm: memcontrol: fix NUMA round-robin reclaim at intermediate level
  mm: memcontrol: fix recursive statistics correctness & scalabilty
  mm: memcontrol: move stat/event counting functions out-of-line
  mm: memcontrol: make cgroup stats and events query API explicitly local
  drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl
  drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl
  mm, memcg: rename ambiguously named memory.stat counters and functions
  arch: remove <asm/sizes.h> and <asm-generic/sizes.h>
  treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>
  fs/block_dev.c: Remove duplicate header
  fs/cachefiles/namei.c: remove duplicate header
  include/linux/sched/signal.h: replace `tsk' with `task'
  fs/coda/psdev.c: remove duplicate header
  ipc: do cyclic id allocation for the ipc object.
  ipc: conserve sequence numbers in ipcmni_extend mode
  ipc: allow boot time extension of IPCMNI from 32k to 16M
  ipc/mqueue: optimize msg_get()
  ipc/mqueue: remove redundant wq task assignment
  ipc: prevent lockup on alloc_msg and free_msg
  scripts/gdb: print cached rate in lx-clk-summary
  ...
2019-05-14 20:08:51 -07:00
Aaro Koskinen b287a25a71 panic/reboot: allow specifying reboot_mode for panic only
Allow specifying reboot_mode for panic only.  This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.

Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Feng Tang c39ea0b9dd panic: avoid the extra noise dmesg
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:

[   35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[   35.749975] ------------[ cut here ]------------

The above message are very useful for debugging.

But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:

	WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
	Call Trace:
	<IRQ>
	try_to_wake_up
	default_wake_function
	autoremove_wake_function
	__wake_up_common
	__wake_up_common_lock
	__wake_up
	wake_up_klogd_work_func
	irq_work_run_list
	irq_work_tick
	update_process_times
	tick_sched_timer
	__hrtimer_run_queues
	hrtimer_interrupt
	smp_apic_timer_interrupt
	apic_timer_interrupt

For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.

Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.

Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.

To verify this, make sure kernel is not configured to reboot on panic and
in console
 # echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.

Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Greg Hackmann e178a5beb3 gcov: clang support
LLVM uses profiling data that's deliberately similar to GCC, but has a
very different way of exporting that data.  LLVM calls llvm_gcov_init()
once per module, and provides a couple of callbacks that we can use to
ask for more data.

We care about the "writeout" callback, which in turn calls back into
compiler-rt/this module to dump all the gathered coverage data to disk:

   llvm_gcda_start_file()
     llvm_gcda_emit_function()
     llvm_gcda_emit_arcs()
     llvm_gcda_emit_function()
     llvm_gcda_emit_arcs()
     [... repeats for each function ...]
   llvm_gcda_summary_info()
   llvm_gcda_end_file()

This design is much more stateless and unstructured than gcc's, and is
intended to run at process exit.  This forces us to keep some local
state about which module we're dealing with at the moment.  On the other
hand, it also means we don't depend as much on how LLVM represents
profiling data internally.

See LLVM's lib/Transforms/Instrumentation/GCOVProfiling.cpp for more
details on how this works, particularly GCOVProfiler::emitProfileArcs(),
GCOVProfiler::insertCounterWriteout(), and GCOVProfiler::insertFlush().

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190417225328.208129-1-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Co-developed-by: Nick Desaulniers <ndesaulniers@google.com>
Co-developed-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Tested-by: Daniel Mentz <danielmentz@google.com>
Tested-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Greg Hackmann 826eba0d77 gcov: clang: move common GCC code into gcc_base.c
Patch series "gcov: add Clang support", v4.

This patch (of 3):

base.c contains a few callbacks specific to GCC's gcov implementation.
Move these into their own module in preparation for Clang support.

Link: http://lkml.kernel.org/r/20190318025411.98014-2-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Petri Gynther <pgynther@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Timmy Li 1fd402df45 kernel/pid.c: remove unneeded hash header file
Hash functions are not needed since idr is used now.  Let's remove hash
header file for cleanup.

Link: http://lkml.kernel.org/r/20190430053319.95913-1-scuttimmy@gmail.com
Signed-off-by: Timmy Li <scuttimmy@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Eric Sandeen 3116ad38f5 kernel/sysctl.c: fix proc_do_large_bitmap for large input buffers
Today, proc_do_large_bitmap() truncates a large write input buffer to
PAGE_SIZE - 1, which may result in misparsed numbers at the (truncated)
end of the buffer.  Further, it fails to notify the caller that the
buffer was truncated, so it doesn't get called iteratively to finish the
entire input buffer.

Tell the caller if there's more work to do by adding the skipped amount
back to left/*lenp before returning.

To fix the misparsing, reset the position if we have completely consumed
a truncated buffer (or if just one char is left, which may be a "-" in a
range), and ask the caller to come back for more.

Link: http://lkml.kernel.org/r/20190320222831.8243-7-mcgrof@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Christian Brauner e260ad01f0 sysctl: return -EINVAL if val violates minmax
Currently when userspace gives us a values that overflow e.g.  file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.

This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed.  This commit makes sure to
return EINVAL when an overflow is detected.  Please note that this is a
userspace facing change.

Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Andy Shevchenko 475dae3854 kernel/sysctl.c: switch to bitmap_zalloc()
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.

Link: http://lkml.kernel.org/r/20190304094037.57756-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Mathieu Malaterre b028fb6128 kernel/signal.c: annotate implicit fall through
There is a plan to build the kernel with -Wimplicit-fallthrough and this
place in the code produced a warning (W=1).

This commit remove the following warning:

  kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=]

Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:50 -07:00
Rasmus Villemoes 6c4e121fda kernel/user.c: clean up some leftover code
The out_unlock label is misleading; no unlocking happens after it, so
just return NULL directly.

Also, nothing between the kmem_cache_zalloc() that creates new and the
two key_put() can initialize new->uid_keyring or new->session_keyring,
so those calls are no-ops.

Link: http://lkml.kernel.org/r/20190424200404.9114-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:49 -07:00
Lin Feng e02c9b0d65 kernel/latencytop.c: rename clear_all_latency_tracing to clear_tsk_latency_tracing
The name clear_all_latency_tracing is misleading, in fact which only
clear per task's latency_record[], and we do have another function named
clear_global_latency_tracing which clear the global latency_record[]
buffer.

Link: http://lkml.kernel.org/r/20190226114602.16902-1-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:49 -07:00
Lin Feng 0cc75888da kernel/latencytop.c: remove unnecessary checks for latencytop_enabled
1. In latencytop source codes, we only have such calling chain:

account_scheduler_latency(struct task_struct *task, int usecs, int inter)
{
        if (unlikely(latencytop_enabled)) /* the outtermost check */
                __account_scheduler_latency(task, usecs, inter);
}
__account_scheduler_latency
    account_global_scheduler_latency
        if (!latencytop_enabled)

So, the inner check for latencytop_enabled is not necessary at all.

2. In clear_all_latency_tracing and now is called
   clear_tsk_latency_tracing the check for latencytop_enabled is redundant
   and buggy to some extent.

   We have no reason to refuse clearing the /proc/$pid/latency if
   latencytop_enabled is set to 0, considering that if we use latencytop
   manually by echo 0 > /proc/sys/kernel/latencytop, then we want to clear
   /proc/$pid/latency and failed.

   Also we don't have such check in brother function
   clear_global_latency_tracing.

Notes: These changes are only visible to users who set
   CONFIG_LATENCYTOP and won't change user tool latencytop's behavior.

Link: http://lkml.kernel.org/r/20190226114602.16902-2-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:49 -07:00
Vasily Averin 831246570d kernel/notifier.c: double register detection
By design notifiers can be registerd once only, 2nd register attempt
called by mistake silently corrupts notifiers list.

A few years ago I investigated described problem, the host was power
cycled because of notifier list corruption.  I've prepared this patch
and applied it to the OpenVZ kernel and sent this patch but nobody
commented on it.  Later it helped us to detect a similar problem in the
OpenVz kernel.

Mistakes with notifier registration can happen for example during
subsystem initialization from different namespaces, or because of a lost
unregister in the roll-back path on initialization failures.

The proposed check cannot prevent the described problem, however it
allows us to detect its reason quickly without coredump analysis.

Link: http://lkml.kernel.org/r/04127e71-4782-9bbb-fe5a-7c01e93a99b0@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:49 -07:00
Dan Schatzberg df5ba5be74 kernel/sched/psi.c: expose pressure metrics on root cgroup
Pressure metrics are already recorded and exposed in procfs for the
entire system, but any tool which monitors cgroup pressure has to
special case the root cgroup to read from procfs.  This patch exposes
the already recorded pressure metrics on the root cgroup.

Link: http://lkml.kernel.org/r/20190510174938.3361741-1-dschatzberg@fb.com
Signed-off-by: Dan Schatzberg <dschatzberg@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Suren Baghdasaryan 0e94682b73 psi: introduce psi monitor
Psi monitor aims to provide a low-latency short-term pressure detection
mechanism configurable by users.  It allows users to monitor psi metrics
growth and trigger events whenever a metric raises above user-defined
threshold within user-defined time window.

Time window and threshold are both expressed in usecs.  Multiple psi
resources with different thresholds and window sizes can be monitored
concurrently.

Psi monitors activate when system enters stall state for the monitored
psi metric and deactivate upon exit from the stall state.  While system
is in the stall state psi signal growth is monitored at a rate of 10
times per tracking window.  Min window size is 500ms, therefore the min
monitoring interval is 50ms.  Max window size is 10s with monitoring
interval of 1s.

When activated psi monitor stays active for at least the duration of one
tracking window to avoid repeated activations/deactivations when psi
signal is bouncing.

Notifications to the users are rate-limited to one per tracking window.

Link: http://lkml.kernel.org/r/20190319235619.260832-8-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Suren Baghdasaryan 8af0c18af1 include/: refactor headers to allow kthread.h inclusion in psi_types.h
kthread.h can't be included in psi_types.h because it creates a circular
inclusion with kthread.h eventually including psi_types.h and
complaining on kthread structures not being defined because they are
defined further in the kthread.h.  Resolve this by removing psi_types.h
inclusion from the headers included from kthread.h.

Link: http://lkml.kernel.org/r/20190319235619.260832-7-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Suren Baghdasaryan 333f3017c5 psi: track changed states
Introduce changed_states parameter into collect_percpu_times to track
the states changed since the last update.

This will be needed to detect whether polled states activated in the
monitor patch.

Link: http://lkml.kernel.org/r/20190319235619.260832-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Suren Baghdasaryan 7fc70a3999 psi: split update_stats into parts
Split update_stats into collect_percpu_times and update_averages for
collect_percpu_times to be reused later inside psi monitor.

Link: http://lkml.kernel.org/r/20190319235619.260832-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:47 -07:00
Suren Baghdasaryan bcc78db641 psi: rename psi fields in preparation for psi trigger addition
Rename psi_group structure member fields used for calculating psi totals
and averages for clear distinction between them and for trigger-related
fields that will be added by "psi: introduce psi monitor".

[surenb@google.com: v6]
  Link: http://lkml.kernel.org/r/20190319235619.260832-4-surenb@google.com
Link: http://lkml.kernel.org/r/20190124211518.244221-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:47 -07:00
Suren Baghdasaryan 9289c5e6a7 psi: make psi_enable static
psi_enable is not used outside of psi.c, make it static.

Link: http://lkml.kernel.org/r/20190319235619.260832-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:47 -07:00