Commit Graph

581 Commits

Author SHA1 Message Date
Russell King
a8d3584a2d [ARM] Remove clk_use()/clk_unuse()
It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:41:37 +00:00
Russell King
78ff18a412 [ARM] Cleanup ARM includes
arch/arm/kernel/entry-armv.S has contained a comment suggesting
that asm/hardware.h and asm/arch/irqs.h should be moved into the
asm/arch/entry-macro.S include.  So move the includes to these
two files as required.

Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h
includes which use those facilities, and remove asm/io.h from
kernel/process.c.

Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm
and arch/arm/mach-footbridge.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 17:39:34 +00:00
Russell King
9d4f13e531 [ARM] Make kernel link address depend on PAGE_OFFSET
We are coding the kernel link address into the makefiles, which is
invisibly dependent on PAGE_OFFSET.  If PAGE_OFFSET is changed, the
makefiles also need to be changed.

Make adjustments such that the makefiles encode just the offset from
PAGE_OFFSET for the kernel link address, and use PAGE_OFFSET in the
linker scripts directly.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 17:28:33 +00:00
Nicolas Pitre
7c612bfd4e [ARM] 3210/1: add missing memory barrier helper for NPTL support
Patch from Nicolas Pitre

Strictly speaking, the NPTL kernel helpers are required for pre ARMv6
only.  They are available on ARMv6+ as well for obvious compatibility
reasons.  However there are cases where extra memory barriers are needed
when using an SMP ARMv6 machine but not on pre-ARMv6.

This patch adds a memory barrier kernel helper that glibc can use as
needed for pre-ARMv6 binaries to be forward compatible with an SMP
kernel on ARMv6, as well as the necessary dmb instructions to the
cmpxchg helper.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-19 22:20:51 +00:00
Russell King
567bd98017 [ARM] Fix sys_sendto and sys_recvfrom 6-arg syscalls
Rather than providing more wrappers for 6-arg syscalls, arrange for
them to be supported as standard.  This just means that we always
store the 6th argument on the stack, rather than in the wrappers.

This means we eliminate the wrappers for:
* sys_futex
* sys_arm_fadvise64_64
* sys_mbind
* sys_ipc

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-17 15:25:42 +00:00
Daniel Jacobowitz
c2e2611425 [ARM] 3205/1: Handle new EABI relocations when loading kernel modules.
Patch from Daniel Jacobowitz

Handle new EABI relocations when loading kernel modules.  This is
necessary for CONFIG_AEABI kernels, and also for some broken
(since fixed) old ABI toolchains.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-14 22:04:22 +00:00
Lothar Wassmann
1ee9530a71 [ARM] 3201/1: PXA27x: Prevent hangup during resume due to inadvertedly enabling MBREQ (replaces: 3198/1)
Patch from Lothar Wassmann

The patch makes sure, that the ouptut functions of pins are restored
before restoring the Alternat Function settings, preventing pins from
being intermediately configured for undefined or unwanted alternate
functions.

Here is the original comment:
I've got a PXA270 system that uses GPIO80 as nCS4. This system did
hang on resume. Digging into the problem I found that the processor
stalled immediately when restoring the GAFR2_U register which restored
the alternate function for GPIO80. Since the GPDR registers were
restored after the GAFR registers, the offending GPIO was configured
as input at this point.
Thus the alternate function that was in effect after restoring the
GAFR was in fact the input function "MBREQ" instead of the output
function "nCS4". The "PXA27x Processor Family Developer's Manual"
(Footnote in Table 6-1 on page 6-3) states that:
"The MBREQ alternate function must not be enabled until the PSSR[RDH]
bit field is cleared. For more details, see Table 3-15, "PSSR Bit
Definitions" on page 3-71."

There is another note in the Developer's Manual (chapter 24.4.2
"GPIO operation as Alternate Function" on page 24-4)
stating that:
"Configuring a GPIO for an alternate function that is not defined for
it causes unpredictable results."

Since some GPIOs have no input function defined, and to prevent
inadvertedly programming the MBREQ function on some pin, the GAFR
registers should be restored after the GPDR registers have been
restored.

Additional provisions have to be made when the MBREQ function is
actually required. The corresponding GAFR bits should not be restored
with the regular GAFR restore, but must be set only after the PSSR
bits have been cleared.

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-12 16:44:05 +00:00
Nikola Valerjev
22f975f4ff [ARM] 3200/1: Singlestep over ARM BX and BLX instructions using ptrace fix
Patch from Nikola Valerjev

Single stepping an application using ptrace() fails over ARM instructions BX and BLX.

Steps to reproduce:

Compile and link the following files

main.c
-----
void foo();
int main() {
    foo();
    return 0;
}

foo.s
-----
	.text
	.globl foo
foo:
	BX LR

Using ptrace() functionality, run to main(), and start singlestepping.
Singlestep over \"BX LR\" instruction won\'t transfer the control back
to main, but run the code to completion.

This problems seems to be in the function get_branch_address() in
arch/arm/kernel/ptrace.c. The function doesn\'t seem to recognize BX
and BLX instructions as branches. BX and BLX instructions can be used
to convert from ARM to Thumb mode if the target address has the low
bit set. However, they are also perfectly legal in the ARM only mode.
Although other things in the kernel seem to indicate that only ARM
mode is accepted (and not Thumb), many compilers will generate BX
and BLX instructions even when generating ARM only code.

Signed-off-by: Nikola Valerjev <nikola@ghs.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-10 11:59:15 +00:00
Richard Purdie
08af295ba4 [ARM] 3188/1: Add missing i2c dependency for Akita
Patch from Richard Purdie

Akita requires inbuilt kernel i2c support for its GPIOs. Add this
requirement to Kconfig and update the defconfig to match.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-01 15:52:47 +00:00
Jeff Hansen
a35d6c91b8 [ARM] Fix IXDP425 setup bug
There is a typo in the ARM IXDP425 setup definition that mistakenly tries
to use UART1's IRQ for UART2's traffic.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-01 15:50:35 +00:00
Russell King
df2f5e721e [ARM SMP] Disable lazy flush_dcache_page for SMP
Lazy flush_dcache_page() causes userspace instability on SMP
platforms, so disable it for now.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-30 16:02:54 +00:00
Richard Purdie
0e1637420e [ARM] 3180/1: Update Zaurus defconfigs
Patch from Richard Purdie

This updates the Zaurus defconfigs. Poodle gets merged into
corgi_defconfig and support for tosa and akita is enabled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28 18:08:45 +00:00
Richard Purdie
243077f58f [ARM] 3179/1: Update/correct Zaurus Kconfig entries
Patch from Richard Purdie

Add iWMMX Extentions for the pxa27x based Zaurus models and
fix a couple of minor mistakes in the PXA Kconfig file.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28 18:08:44 +00:00
Russell King
79a558ffba [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-25 15:59:01 +00:00
Russell King
9f22090780 [ARM] Realview core.c does not need mach-types.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-25 15:57:21 +00:00
Russell King
5edf71ae12 [ARM] Do not call flush_tlb_kernel_range() with IRQs disabled.
We must not call TLB maintainence operations with interrupts disabled,
otherwise we risk a lockup in the SMP IPI code.

This means that consistent_free() can not be called from a context with
IRQs disabled.  In addition, we must not hold the lock in consistent_free
when we call flush_tlb_kernel_range().  However, we must continue to
prevent consistent_alloc() from re-using the memory region until we've
finished tearing down the mapping and dealing with the TLB.

Therefore, leave the vm_region entry in the list, but mark it inactive
before dropping the lock and starting the tear-down process.  After the
mapping has been torn down, re-acquire the lock and remove the entry
from the list.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-25 15:52:51 +00:00
Russell King
3c0bdac387 [ARM] Remove mach-types.h from head.S
We don't really need to check whether the machine type is Netwinder
or CATS before setting up the PCI IO mapping for debugging.  This
allows us to eliminate asm/mach-types.h from head.S

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-25 15:43:22 +00:00
Russell King
9b73fcf85f [ARM] Shut up gcc warning in clps7500 core.c
core.c:263: warning: initialization makes integer from pointer without a cast

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21 17:03:15 +00:00
Russell King
2f3eca8b4f [ARM] Shut up gcc warning in assabet.c
assabet.c:291: warning: 'scr' may be used uninitialized in this function

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21 17:01:13 +00:00
Dirk Opfer
067c90481a [ARM] 3170/1: Sharp SL-6000x: platform device conversion fixup
Patch from Dirk Opfer

Fix an error in tosa.c after the platform device conversion.

Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21 15:17:06 +00:00
Daniel Jacobowitz
a6c61e9dfd [ARM] 3168/1: Update ARM signal delivery and masking
Patch from Daniel Jacobowitz

After delivering a signal (creating its stack frame) we must check for
additional pending unblocked signals before returning to userspace.
Otherwise signals may be delayed past the next syscall or reschedule.

Once that was fixed it became obvious that the ARM signal mask manipulation
was broken.  It was a little bit broken before the recent SA_NODEFER
changes, and then very broken after them.  We must block the requested
signals before starting the handler or the same signal can be delivered
again before the handler even gets a chance to run.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-19 10:01:07 +00:00
Russell King
d2c5b69099 [ARM] Fix get_user when passed a const pointer
Unfortunately, later gcc versions error out when our get_user is passed
a const pointer, since we write to a temporary variable declared as
typeof(*(p)) which propagates the const-ness.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-18 14:22:03 +00:00
Russell King
02b3083922 [ARM] Fix some corner cases in new mm initialisation
Document that the VMALLOC_END address must be aligned to 2MB since
it must align with a PGD boundary.

Allocate the vectors page early so that the flush_cache_all() later
will cause any dirty cache lines in the direct mapping will be safely
written back.

Move the flush_cache_all() to the second local_flush_cache_tlb() and
remove the now redundant first local_flush_cache_tlb().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-17 22:43:30 +00:00
Russell King
67a1901ff4 [ARM] __ioremap doesn't use 4th argument
The "align" argument in ARMs __ioremap is unused and provides a
misleading expectation that it might do something.  It doesn't.
Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-17 16:48:00 +00:00
Russell King
728f5c076a [ARM] Improve comment about ASSERT()s in vmlinux.lds.S
Provide folk with an idea what to do if the ASSERT statements fail
with their linker.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-17 16:43:14 +00:00
Russell King
45e109d072 [ARM] sa1111.c needs asm/sizes.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 18:29:51 +00:00
Russell King
1b12050f17 [ARM] Move zone adjustment for SA1111 on SA11x0 platforms
Unfortunately, using PAGE_SHIFT in asm/arch/memory.h is unsafe, and we
can't include asm/page.h into this file because then we have a circular
dependency.  Move the offending code to arch/arm/common/sa1111.c
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 17:38:40 +00:00
Ben Dooks
994e128053 [ARM] 3162/1: S3C2410 - updated defconfig
Patch from Ben Dooks

Minor changes, including add SysRq, selecting the DM9000
as a built-in driver, not as a module, and selecting the
framebuffer.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 15:05:13 +00:00
Ben Dooks
b526bf23fd [ARM] 3161/1: BAST - fix commas on end of structs
Patch from Ben Dooks

Make the use of , on the lsat entry structs consistenent
through arch/arm/mach-s3c2410/mach-bast.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 15:05:12 +00:00
Russell King
224b5be6dd [ARM] compressed/head.S debugging defaults to asm/arch/debug-macro.S
Since we want new platforms to use debug-macro.S, make the decompressor
debugging method default to using this include file rather than having
new platforms add to an #if defined().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 14:59:51 +00:00
Russell King
0a5709b2dc [ARM] Include asm/hardware.h instead of asm/arch/hardware.h
Rationalise hardware.h include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 14:51:20 +00:00
Russell King
ce07d90aa8 [ARM] Fix arch-realview/system.h to use __io_address()
Move __io_address to arch-realview/hardware.h, drop core.h from platsmp.c
and localtimer.c, and include asm/io.h where required.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16 14:38:19 +00:00
Russell King
72724382d3 [ARM] Initialise SA1111 core before SA1111 PCMCIA
This avoids a BUG_ON with kref.c when SA1111 tries to register
a driver with an unregistered bus type.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-15 19:04:22 +00:00
Russell King
eceab4ac8d [ARM] Use kernel/power/Kconfig
Rather than defining our own PM option, use kernel/power/Kconfig.
This fixes build errors introduced by
bca73e4bf8

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-15 11:31:41 +00:00
Linus Torvalds
70ac551651 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-11-13 18:17:54 -08:00
Jeff Garzik
bca73e4bf8 [PATCH] move pm_register/etc. to CONFIG_PM_LEGACY, pm_legacy.h
Since few people need the support anymore, this moves the legacy
pm_xxx functions to CONFIG_PM_LEGACY, and include/linux/pm_legacy.h.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:10 -08:00
Richard Purdie
bd5d080ab9 [ARM] 3160/1: SharpSL: Add driver for Akita specific GPIOs
Patch from Richard Purdie

Add a driver for the extra GPIOs found on the Sharp SL-C1000 (Akita).
These GPIOs are found on a Maxim MAX7310 I2C i/o expander chip. A
generic GPIO driver for the MAX7310 was attempted but this mini
driver is a much simpler and much more effective solution avoiding
several issues and complexity the generic driver had (as discussed
on LKML).

The platform device is required so the device parent can be set
correctly which ensures the device is one of the last to suspend
and first to resume. Whilst the i2c suspend/resume calls can be
influenced, nothing guarantees this is easlier/later than the
subsystems the gpios are used on which are all independent of i2c
(sound, irda, video/backlight etc.).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-13 10:07:48 +00:00
Richard Purdie
e8b6f7f437 [ARM] 3159/1: SharpSL: Add PM device driver for the SL-Cx00 machines.
Patch from Richard Purdie

Add a SharpSL PM device driver for the SL-Cxx00 machines.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-13 10:07:47 +00:00
Richard Purdie
d72f25b0df [ARM] 3158/1: SharpSL: Add PM device driver for the SL-C7x0 machines.
Patch from Richard Purdie

Add a SharpSL PM device driver for the SL-C7x0 machines.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-13 10:07:46 +00:00
Russell King
865052fd51 [ARM] Re-fix footbridge
That's __phys_to_pfn, not __phy_to_pfn.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-13 09:53:34 +00:00
Pavel Machek
c35bf4a593 [ARM] Fix collie for -rc1
This fixes compilation for collie after -rc1 platform_device
changes. And yes, it even boots.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12 20:25:25 +00:00
Richard Purdie
c5e1ae9729 [ARM] 3154/1: SharpSL PM Driver updates
Patch from Richard Purdie

Updates to the SharpSL PM driver including cleanups from both
Pavel Machek and myself and updates after the platform device
changes to make it compile again.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12 18:53:48 +00:00
Richard Purdie
94cabd003e [ARM] 3149/1: SharpSL: Add Akita (SL-C1000) machine support
Patch from Richard Purdie

Add the core machine support for the Sharp SL-C1000 (Akita)
and enable the Kconfig selection for it.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12 18:53:48 +00:00
Russell King
da2660d2c4 [ARM] Restore apparant pointless change in arch/arm/kernel/smp.c
Restore smp.c back to how it used to be.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12 17:21:47 +00:00
Russell King
6460177f42 [ARM] Fix Footbridge-based machines
Unfortunately, all these machines got broken when the PFN memory
setup changes happened.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12 16:49:37 +00:00
Russell King
c6bd232843 [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11 21:56:33 +00:00
Lennert Buytenhek
60cef2988a [ARM] 3147/1: update ixp2000 defconfigs to 2.6.14-git13
Patch from Lennert Buytenhek

Update the ixp2000 defconfigs to 2.6.14-git13.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11 21:53:30 +00:00
Nicolas Pitre
8adbb3718d [ARM] 3152/1: make various assembly local labels actually local (the rest)
Patch from Nicolas Pitre

For assembly labels to actually be local they must start with ".L" and
not only "." otherwise they still remain visible in the final link and
clutter kallsyms needlessly, and possibly make for unclear symbolic
backtrace. This patch simply inserts a"L" where appropriate. The code
itself is unchanged.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11 21:51:49 +00:00
Nicolas Pitre
a9c4814d8d [ARM] 3151/1: make various assembly local labels actually local (io-*.S)
Patch from Nicolas Pitre

For assembly labels to actually be local they must start with ".L" and
not only "." otherwise they still remain visible in the final link and
clutter kallsyms needlessly, and possibly make for unclear symbolic
backtrace. This patch simply inserts a"L" where appropriate. The code
itself is unchanged.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11 21:51:48 +00:00
Nicolas Pitre
7ba11a9c15 [ARM] 3150/1: make various assembly local labels actually local (uaccess.S)
Patch from Nicolas Pitre

For assembly labels to actually be local they must start with ".L" and
not only "." otherwise they still remain visible in the final link and
clutter kallsyms needlessly, and possibly make for unclear symbolic
backtrace. This patch simply inserts a"L" where appropriate. The code
itself is unchanged.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11 21:51:47 +00:00