Commit Graph

72 Commits

Author SHA1 Message Date
Nicolas Pitre
6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Eric Bénard
c074512905 imx-esdhc: update devices registration
Tested on i.MX25 and i.MX35 and i.MX51

Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19 18:45:00 +02:00
Eric Bénard
c0550c4bf1 eukrea_mbimxsd: add support for DVI displays
Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19 18:44:59 +02:00
Eric Bénard
52d084fc90 cpuimx25 & cpuimx35: fix OTG port registration in host mode
the PHY is UTMI so don't create an ULPI viewpoint.

Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19 18:44:58 +02:00
Eric Bénard
e482b3bee6 mx25: fix clock's calculation
* get_rate_arm : when 400MHz clock is selected (cctl & 1<<14),
ARM clock is 400MHz (MPLL * 3 / 4) and not 800MHz
* get_rate_per : peripherals's clock is derived from AHB and not
from IPG (ref manual : figure 5-1)
* can2_clk : use the correct ID

* without this patch, peripherals getting their clock from PER
clocks work fine because of the 2 errors which fix themselves
(ARM clock x 2 and per clock actually based on IPG which is AHB/2)
but flexcan can't work as it gets its clock from IPG and thus
calculates its bitrate using a reference value which is twice
what it really is.

Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19 18:44:58 +02:00
Wolfram Sang
0d0e9cbf81 mx25/clocks: match esdhc-clocks to platform device
So the correct clock will be taken for each of the two independent
controllers.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11 15:31:41 +02:00
Uwe Kleine-König
6bd96f3c33 ARM: imx: dynamically register fec devices
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11 15:31:37 +02:00
Eric Bénard
6f8460eb82 eukrea_mbimxsd for cpuimx25: add CAN & SDCard support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11 15:22:14 +02:00
Eric Bénard
f5e40c28b6 i.mx25: add esdhc support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11 15:22:13 +02:00
Uwe Kleine-König
00b57bf978 ARM: imx: reorganize nand registration to use a struct
Addiontionally make the interrupt #defines match the base address
defines MX.._NFC_BASE_ADDR.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01 09:33:02 +02:00
Uwe Kleine-König
ab5605037c ARM: imx: use platform ids for spi_imx devices
The driver recently learned to handle platform ids.  Make use of this
new feature.  The up side is that the driver needs less knowledge about
the spi interfaces used on different SoCs.

Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01 09:32:14 +02:00
Uwe Kleine-König
64de5ec168 ARM: imx: reorganize imx-i2c device registration to use a struct per SoC
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 15:46:39 +02:00
Uwe Kleine-König
4697bb926f ARM: imx: dynamically allocate imx-ssi devices
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 15:46:38 +02:00
Uwe Kleine-König
5162de08d1 ARM: imx: change the way imx-uarts are registered
For mx1_defconfig this yields:

	add/remove: 1/0 grow/shrink: 1/4 up/down: 49/-108 (-59)
	function                                     old     new   delta
	imx1_imx_uart_data                             -      48     +48
	kernel_config_data                          7277    7278      +1
	imx_add_imx_uart_1irq                        132     128      -4
	imx_add_imx_uart_3irq                        164     156      -8
	scb9328_init                                  96      64     -32
	mx1ads_init                                  220     156     -64

for mx21_defconfig this yields:

	add/remove: 1/0 grow/shrink: 0/3 up/down: 64/-52 (12)
	function                                     old     new   delta
	imx21_imx_uart_data                            -      64     +64
	imx_add_imx_uart_3irq                        160     156      -4
	imx_add_imx_uart_1irq                        140     136      -4
	mx21ads_board_init                           220     176     -44

for a random mx25 config this yields:

	add/remove: 1/0 grow/shrink: 0/5 up/down: 80/-56 (24)
	function                                     old     new   delta
	imx25_imx_uart_data                            -      80     +80
	imx_add_imx_uart_3irq                        160     156      -4
	imx_add_imx_uart_1irq                        140     136      -4
	mx25pdk_init                                 288     272     -16
	eukrea_mbimxsd_baseboard_init                272     256     -16
	eukrea_cpuimx25_init                         252     236     -16

for mx27_defconfig this yields:

	add/remove: 1/0 grow/shrink: 0/10 up/down: 96/-280 (-184)
	function                                     old     new   delta
	imx27_imx_uart_data                            -      96     +96
	imx_add_imx_uart_3irq                        160     156      -4
	imx_add_imx_uart_1irq                        140     136      -4
	pca100_init                                  560     544     -16
	mx27pdk_init                                 112      96     -16
	mx27lite_init                                 92      76     -16
	eukrea_cpuimx27_init                         332     316     -16
	pcm038_init                                  388     348     -40
	mxt_td60_board_init                          320     280     -40
	eukrea_mbimx27_baseboard_init                476     436     -40
	mx27ads_board_init                           368     280     -88

and finally for mx3_defconfig:

	add/remove: 2/0 grow/shrink: 0/9 up/down: 128/-344 (-216)
	function                                     old     new   delta
	imx31_imx_uart_data                            -      80     +80
	imx35_imx_uart_data                            -      48     +48
	imx_add_imx_uart_1irq                        132     128      -4
	imx_add_imx_uart_3irq                        164     152     -12
	mx31moboard_devboard_init                    360     344     -16
	mx31lite_db_init                             176     160     -16
	mx31moboard_smartbot_init                    384     360     -24
	kzm_board_init                               232     208     -24
	armadillo5x0_init                            392     364     -28
	mx31lilly_db_init                            248     208     -40
	mxc_board_init                              3760    3580    -180

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 15:46:37 +02:00
Uwe Kleine-König
35bab0589b ARM: imx: change the way spi-imx devices are registered
Group soc specific data in a global struct instead of repeating it for
each call to imxXX_add_spi_imxX.  The structs holding the actual data
are placed in .init.constdata and so don't do much harm.  Compared to
the previous approach this reduces code size to call imx_add_spi_imx.

Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 15:46:31 +02:00
Russell King
b6d17c1a8e Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6 2010-09-01 10:08:50 +01:00
Uwe Kleine-König
70ddd47f7d ARM: imx: fix build failure concerning otg/ulpi
The build failure was introduced by

	13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23 20:50:17 -07:00
Eric Bénard
ec53fe3d65 eukrea-baseboards: fix the merge in one file
Last change I did made a big mess in function names and CONFIG names,
this patch fixes this so that the baseboard support is really built
when selected.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-16 13:30:35 +02:00
Jason Wang
84659ab585 imx: move gpio init after to irq init
The commit 9a763bf "get rid of mxc_gpio_init" changed gpio_init
and irq_init sequence. Usually we will call set_irq_chained_handler
in gpio_init functions, this should be called after the irq_init
called, otherwise the chained irq can't get propoer irq_chip and this
irq will remain masked even we called set_irq_chained_handler.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:35 +02:00
Eric Bénard
95afd09075 eukrea-baseboards: merge includes in one file
as per suggested by Sascha

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:34 +02:00
Eric Bénard
8cd1b5c3d4 Fix KConfig warning
This patch fixes the following Kconfig warning :
"arch/arm/mach-mx25/Kconfig:18:warning: choice value used outside its
choice group

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:33 +02:00
Eric Bénard
72fe99f642 mbimxsd baseboards : remove unnecessary include
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:32 +02:00
Marc Kleine-Budde
61c6850232 imx: dynamically register flexcan devices for mx25 and mx35
In order to make this patch compile, even if the flexcan driver with
it's header defining the platform data isn't merged yet, two ifdefs have
been added. They effect that the "imx_add_flexcan" function results in a
no-op function if the driver hasn't been activated.

These ifdefs can be removed after the flexcan driver has been merged.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:29 +02:00
Sascha Hauer
e993ade18f mx25: flexcan clock support
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:24 +02:00
Eric Bénard
7e688f0d77 imx25: fix low level debug
DEBUG_LL is actually broken on i.MX25, this patch fix it.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:29:21 +02:00
Uwe Kleine-König
2dcf78c0ee Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD
There are some more conflicts than detected by git, namely support for
the newly added cpuimx machines needed to be converted to dynamic device
registration.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Conflicts:
	arch/arm/mach-imx/Makefile
	arch/arm/mach-imx/devices.c
	arch/arm/mach-imx/devices.h
	arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
	arch/arm/mach-mx2/Kconfig
	arch/arm/mach-mx25/Makefile
	arch/arm/mach-mx25/devices.c
	arch/arm/plat-mxc/include/mach/mx25.h
	arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-07-26 14:27:25 +02:00
Baruch Siach
f747847e8f mx25: add support for the CSI device
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:29 +02:00
Baruch Siach
ac0eb0f3ca mx25: add a comment documenting undocumented IPG clocks
The information in the i.MX25 Reference Manual is lacking. Add information from
the Freescale BSP.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:18 +02:00
Baruch Siach
fd3c46b306 mx25pdk: register watchdog device
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:17 +02:00
Baruch Siach
30816abc21 mx25: add watchdog clock
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:15 +02:00
Eric Bénard
6f1fa706fc i.MX25: add cpuimx25 module and its baseboard
* cpuimx25 integrates i.MX25, RAM, NAND, Ethernet, I2C RTC, USB Host
and USB OTG
* mbimxsd provides access to LCD, Audio, LED, Switch button, UART ...

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:14 +02:00
Eric Bénard
8402ed30e1 i.MX25: add AUDMUX and SSI support
* add clocks for audmux and ssi 1 & 2
* add irq for ssi 1 & 2
* add devices platform for ssi1 & 2
* update audmux-v2 for i.MX25
* add base addresses for audmux & ssi 1 & 2
* add iomux configuration for GPIO for AUD5 port

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:13 +02:00
Eric Bénard
a6e92b49ae i.MX25: fix get_rate_otg to return the correct value
usb drivers need to get the right value for otg clock so
calculate and return it

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:09 +02:00
Eric Bénard
5a36c39923 MX25: put define for OTG base address in right include
the standard place for this define is include/mach/mx25.h

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:06 +02:00
Baruch Siach
c45dd81400 mx25pdk: add keypad support
The keymap is taken from the Freescale supplied kernel.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:17:56 +02:00
Baruch Siach
49535a952b mx25: add platform code for imx-keypad
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:17:55 +02:00
Uwe Kleine-König
7cc3c84666 ARM: imx: dynamically register imx-uart devices (imx25)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:56 +02:00
Uwe Kleine-König
63ddc5b016 ARM: imx: dynamically register spi_imx devices (imx25)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:48 +02:00
Uwe Kleine-König
a8ff045603 ARM: imx: dynamically register imx-i2c devices (imx25)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:40 +02:00
Uwe Kleine-König
b0c4845c47 ARM: imx: Change the way nand devices are registered (imx25)
Make use of new mechanism to register a nand device.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:32 +02:00
Uwe Kleine-König
6cc702a6a2 ARM: mx25: remove paragraphs with old address of the FSF
As the kernel contains a copy of the GPL anyhow just get rid of the address
specification instead of fixing it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:24 +02:00
Uwe Kleine-König
9a763bfbe4 ARM: imx: get rid of mxc_gpio_init
This function is defined once for each imx family and so is in the way
when compiling a kernel for more than one SoC.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:40 +02:00
Uwe Kleine-König
c10ea4d60e ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number
Additionally document all known names of that machine.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-02 21:33:15 +02:00
Wolfram Sang
5ab0a2758c arm/mx25: add watchdog device
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Juergen Beisert <jbe@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-18 08:32:33 +02:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Linus Torvalds
ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Uwe Kleine-König
9b1489e989 Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into imx/master
Removed selection of COMMON_CLKDEV by CONFIG_ARCH_MX5.  This is handled
in 03e09cd890.

arch/arm/plat-mxc/iomux-mx1-mx2.c was moved to
arch/arm/plat-mxc/iomux-v1.c in 5e2e95f520
and got bug fixed in 5c17ef878f.  The bug
in arch/arm/plat-mxc/iomux-v1.c isn't present any more since
bac3fcfad5, so
arch/arm/plat-mxc/iomux-mx1-mx2.c is simply deleted.

Conflicts:
	arch/arm/plat-mxc/Kconfig
	arch/arm/plat-mxc/Makefile
	arch/arm/plat-mxc/iomux-mx1-mx2.c

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-25 14:01:49 +01:00
Baruch Siach
08268b78d6 mx25: move ARCH_MXC_IOMUX_V3 to the ARCH level
ARCH_MXC_IOMUX_V3 is not specific to the i.MX25 PDK platform. Thus,
ARCH_MXC_IOMUX_V3 should be selected by ARCH_MX25.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-24 10:45:21 +01:00
Uwe Kleine-König
261f6f681c arm/mx25: don't include iomux.h which is for iomux-v1 machines
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:14 +01:00
Baruch Siach
0f547dc1f6 mx25pdk: add LCD support
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-18 08:35:55 +01:00