Commit Graph

275 Commits

Author SHA1 Message Date
Linus Torvalds
c9d6329c35 Merge branch 'for-next' of git://git.linaro.org/people/triad/linux-pinctrl
* 'for-next' of git://git.linaro.org/people/triad/linux-pinctrl:
  pinctrl/sirf: fix sirfsoc_get_group_pins prototype
  pinctrl: Don't copy function name when requesting a pin
  pinctrl: Don't copy pin names when registering them
  pinctrl: Remove unsafe __refdata
  pinctrl: get_group_pins() const fixes
  pinctrl: add a driver for the CSR SiRFprimaII pinmux
  pinctrl: add a driver for the U300 pinmux
  drivers: create a pin control subsystem
2011-10-25 14:04:01 +02:00
Linus Walleij
8959e74399 mfd: Delete ab3550 driver
The AB3550 never passed the prototype stage. Instead it was used
as a precursor to AB5500 for testing basic building blocks used
in that chip, since they had large similarities. Since AB3550 will
not see the light of day in product form and since the prototypes
are no longer used, let's delete the driver and any references to
it.

Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24 14:09:16 +02:00
Sascha Hauer
40c6d8aee4 ARM: 7022/1: allow to detect conflicting zreladdrs
Boards used to specify zreladdr in their Makefile.boot with
zreladdr-y := x, so conflicting zreladdrs were silently overwritten.
This patch changes this to zreladdr-y += x, so that we end
up with multiple words in zreladdr in such a case. We can
detect this later and complain if necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17 09:12:40 +01:00
Linus Walleij
98da352953 pinctrl: add a driver for the U300 pinmux
This adds a driver for the U300 pinmux portions of the system
controller "SYSCON". It also serves as an example of how to use
the pinmux subsystem. This driver also houses the platform data
for the only supported platform.

This deletes the old U300 driver in arch/arm/mach-u300 and
replace it with a driver using the new subsystem.

The new driver is considerably fatter than the old one, but it
also registers all 467 pins of the system and adds the power
and EMIF pin groups and corresponding functions. The idea
is to use this driver as a a reference for other
implementation so it needs to be as complete and verbose
as possible.

Reviewed-by: Barry Song <21cnbao@gmail.com>
[Fixup for changed function names and semantics in the v10 patch]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-13 12:57:45 +02:00
Arnd Bergmann
71f2c15375 Merge branch 'depends/rmk/devel-stable' into next/cleanup 2011-10-08 21:07:42 +02:00
Nicolas Pitre
639da5ee37 ARM: add an extra temp register to the low level debugging addruart macro
Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use.  Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.

This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.

Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-26 10:11:25 -04:00
Linus Walleij
cc890cd78a ARM: 7083/1: rewrite U300 GPIO to use gpiolib
This rewrites the U300 GPIO so as to use gpiolib and
struct gpio_chip instead of just generic GPIO, hiding
all the platform specifics and passing in GPIO chip
variant as platform data at runtime instead of the
compiletime kludges.

As a result <mach/gpio.h> is now empty for U300 and
using just defaults.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Debian kernel maintainers <debian-kernel@lists.debian.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-08 10:03:56 +01:00
Russell King
ad30a2bbdc Merge branch 'atag_offset' of git://git.linaro.org/people/nico/linux into devel-stable 2011-08-23 10:54:51 +01:00
Jon Medhurst
d70a5969e9 ARM: mach-u300: Setup consistent dma size at boot time
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2011-08-22 12:00:11 +00:00
Linus Walleij
e9fe594344 ARM: 7034/1: mach-u300: delete irq_to_gpio() function
This function is not used in the U300 build, and on the whole the
call is hard to consolidate so get rid of it from this machine.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22 09:12:53 +01:00
Linus Walleij
eb3cf18ccc ARM: 7033/1: mach-u300: break out GPIO driver specifics
The <mach/gpio.h> file is included from upper directories
and deal with generic GPIO and gpiolib stuff. Break out the
platform and driver specific defines and functions into its own
header file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22 09:12:53 +01:00
Nicolas Pitre
4611b68922 ARM: mach-u300: convert boot_params to atag_offset
Someone was smoking good stuff with CONFIG_MACH_U300_2MB_ALIGNMENT_FIX here...

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-08-21 17:15:18 -04:00
Linus Walleij
c21d2319ef mach-u300: retire AVE device
We need to face the fact that there will never be a mainlined
driver for the U300 advanced video encoder, so let's just
drop the declaration of this device.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-17 10:20:30 +02:00
Linus Walleij
711e2deb63 mach-u300: delete bogus memory mappings
Get rid of the bogus memory map to TCM (there is a real
mechanism for handling that nowadays!) and the commented-
out declaration of the ROM.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-17 10:20:30 +02:00
Linus Walleij
c43ed5600b mach-u300: drop SEMI config option
When we have only dual-RAM configurations, the SEMI (shared
memory interface) must always be enabled.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-17 10:20:29 +02:00
Linus Walleij
7328514654 mach-u300: retire odd singlemem variant
The U300 had a special variant where a memory was shared
between two CPU:s and only one part of memory was
accessible for the kernel. However it is now seriously
legacy and only create problems for kernel consolidation,
so let's retire it.

Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-17 10:20:29 +02:00
Russell King
8f3c4537bb ARM: gpio: make trivial GPIOLIB implementation the default
Rather than marking the mach/gpio.h header files which want to use the
trivial GPIOLIB implementation, mark those which do not want to use it
instead.  This means that by default, you get the trivial implementation
and only have to do something extra if you need to.  This should
encourage the use of the trivial default implementation.

As an additional bonus, several gpio.h header files become empty.

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12 08:54:19 +01:00
Russell King
01e7dc89d0 ARM: gpio: consolidate gpio_to_irq
Many of the gpio_to_irq implementations use the gpiolib version of this
function.  Provide the standard gpiolib gpio_to_irq() for everyone, but
allow platforms to override it if they wish.  Add the neccessary
overrides for those platforms which do not use the standard definition.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12 08:54:05 +01:00
Linus Torvalds
69f1d1a6ac Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig
2011-07-26 17:41:04 -07:00
Jiri Kosina
b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Linus Walleij
32d55ff916 mach-u300: set apropriate FIFO trigger levels
The U300 just defined the fill level limits for the FIFOs to
1 item out of habit. It can easily handle four.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-23 12:09:43 +02:00
Linus Walleij
cde21de148 mach-u300: cleanup clockevent code
Use the new clockevents_config_and_register() function to register
the U300 clockevent, since that code requires ->cpumask to be set
we set this even on this UP system to please the framework.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-23 12:09:42 +02:00
Joe Perches
28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00
Linus Walleij
6075e9df47 ARM: 6949/2: mach-u300: fix compilaton warning in IO accessors
The IO accessors for U300 were using u32 rather than the nominal
void __iomem * type, rectify this by properly defining the
virtual base for statically mapped peripherals to be
void __iomem *. Requires fixing a field in struct clk as well.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-09 10:15:06 +01:00
Linus Walleij
9425032b77 ARM: 6947/2: mach-u300: fix compilation error in timer
The introduction of the mmio timer accidentally referenced the
old clocksource struct which does not exist anymore. Fix this by
using a simple string instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-06 10:56:10 +01:00
Linus Walleij
06caa7ad83 gpio: move U300 GPIO driver to drivers/gpio
This moves the U300 GPIO driver out of arch/arm/mach-u300 and into
the desired location indicated by the subsystem maintainer.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:29:33 -06:00
Russell King
234b6ceddb clocksource: convert ARM 32-bit up counting clocksources
Convert ixp4xx, lpc32xx, mxc, netx, pxa, sa1100, tcc8k, tegra and u300
to use the generic mmio clocksource recently introduced.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: "Hans J. Koch" <hjk@hansjkoch.de>
Acked-by: Colin Cross <ccross@android.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23 18:04:51 +01:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
411f5c7a50 Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig
2011-03-17 19:08:06 -07:00
Linus Walleij
96cb164bde mach-u300: define a dummy filter function for coh901318
All platform data has to be made conditional on
as to avoid cluttering the code with other #ifdef:s.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14 14:05:17 +01:00
Linus Walleij
ec8f12533b mach-u300: config U300 PL180 PL011 PL022 for DMA
This will configure the platform data for the PL180, PL011 and
PL022 PrimeCells found in the U300 to use DMA with the generic
PrimeCell DMA engine for COH 901 318.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14 14:05:13 +01:00
Linus Walleij
1a721859f8 mach-u300: use mmci driver for GPIO card detect
The mmci driver can handle a GPIO pin for card detect, using
IRQs and all just fine, so switch to using that. Delete the
old bogus input device hack, if userspace need to detect
MMC cards it should use udev like everyone else.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14 14:05:12 +01:00
Russell King
f4117ac9e2 ARM: P2V: separate PHYS_OFFSET from platform definitions
This uncouple PHYS_OFFSET from the platform definitions, thereby
facilitating run-time computation of the physical memory offset.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17 23:26:55 +00:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Russell King
4073723acb Merge branch 'misc' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/common/Makefile
	arch/arm/kernel/Makefile
	arch/arm/kernel/smp.c
2011-01-06 22:32:52 +00:00
Russell King
5c21b7ca2c ARM: u300: convert sched_clock() to use new infrastructure
Convert u300 to use the new sched_clock() infrastructure for extending
32bit counters to full 64-bit nanoseconds.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:47 +00:00
Russell King
5e06b6492e ARM: ensure all sched_clock() implementations are notrace marked
ftrace requires sched_clock() to be notrace.  Ensure that all
implementations are so marked.  Also make sure that they include
linux/sched.h

Also ensure OMAP clocksource read functions are marked notrace as
they're used for sched_clock() too.

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Eric Miao <eric.y.miao@gmail.com>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:42 +00:00
Russell King
da797478c1 ARM: U300: update clock source registration
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new
interfaces were added which simplify (and optimize) the selection of the
divisor shift/mult constants.  Switch over to using this new interface.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:37 +00:00
Jiri Kosina
4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Jean-Christop PLAGNIOL-VILLARD
6d803ba736 ARM: 6483/1: arm & sh: factorised duplicated clkdev.c
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.

as the code is identical at 99%

put the arch specific code for allocation as example in asm/clkdev.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26 10:51:04 +00:00
Uwe Kleine-König
b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Linus Torvalds
90ae83f7fc Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/pl022: fix erroneous platform data in U300
  spi: fixed odd static string conventions in core code
  spi/bfin_spi: only request GPIO on first load
  spi/bfin_spi: handle error/status changes after data interrupts
  spi: enable spi_board_info to be registered after spi_master
2010-11-01 07:50:43 -04:00
Linus Walleij
65289d6345 spi/pl022: fix erroneous platform data in U300
This fixes an erroneous use of LSB first in the U300 machine, the
PL022 used in U300 is a standard ARM core that doesn't support this
bit so it should never have been set.

Cc: Kevin Wells <wellsk40@gmail.com>OA
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-01 01:01:08 -04:00
David Woodhouse
67577927e8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:
	drivers/mtd/mtd_blkdevs.c

Merge Grant's device-tree bits so that we can apply the subsequent fixes.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30 12:35:11 +01:00
Linus Walleij
93ac5a552c ARM: platform data to use the FSMC NAND with the U300
Just as it says, if this is merged along with the other patch, the
driver supports the U300 NAND flash interface.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25 00:35:46 +01:00
Linus Torvalds
b5153163ed Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...
2010-10-21 16:42:32 -07:00
Nicolas Pitre
6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Jeremy Kerr
0ea1293009 arm: return both physical and virtual addresses from addruart
Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.

This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.

Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com>
and Tony Lindgren <tony@atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-20 00:27:33 -04:00
Kevin Wells
bde435a9ca spi/pl022: Add spi->mode support to AMBA SPI driver
This patch adds spi->mode support for the AMBA pl022 driver and
allows spidev to correctly alter SPI modes. Unused fields used in
the pl022 header file for the pl022_config_chip have been removed.

The ab8500 client driver selects the data transfer size instead
of the platform data.

For platforms that use the amba pl022 driver, the unused fields
in the controller data structure have been removed and the .mode
field in the SPI board info structure is used instead.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Linus Walleij
63f469324f ARM: 6377/1: supply _cansleep gpio function to U300
We have to use _cansleep gpio accessors in the MMCI driver so as
to avoid slowpath warnings, now U300 has MMCI but doesn't have
these functions in place to siply wrap the existing non-sleeping
functions into sleepable variants.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17 10:16:49 +01:00
Linus Walleij
3af8a8dad0 ARM: 6297/1: move U300 timer to dynamic clock lookup
This moves the U300 timer code to look up its clock rate from the
clock framework as is apropriate and also switches it over to use
the generic code for *calc_mult_shift() on clock source and clock
event.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:56 +01:00
Linus Walleij
b7276b236d ARM: 6296/1: clock U300 intcon and timer properly
This removes the quirks to clock the U300 VIC and timer by custom
hooks and moves the control out to the clock framework where it
belongs. This is possible now that clocks are available early.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:55 +01:00
Linus Walleij
379aae5d6c ARM: 6295/1: fix U300 apb_pclk split
This fixes a regression due to the new apb_pclk stuff in the U300
platform, makes it run by splitting the apb clock off the single
UART clocks. For the MMCI and PL022 clocks we don't split them:
these are actually hardwired to the same clock terminal and will
thus simply have a double reference count and will be referenced
twice.

We also move clock registration to .init_irq() so they are
available early enough for probing to be successful and remove the
earlier quirk to clock primecells during PrimeCell registration.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:55 +01:00
Linus Walleij
c2fab1242a ARM: 6306/1: fix inverted MMC card detect in U300
This converts the U300 to uninverted logic for MMCI card detect,
fixing a regression in the current tree.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:54 +01:00
Jiri Kosina
d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Russell King
ceb0885d3b Merge branch 'misc' into devel
Conflicts:
	arch/arm/mm/init.c
2010-07-31 14:20:02 +01:00
Russell King
b31fc7af78 Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel 2010-07-31 14:19:35 +01:00
Linus Walleij
1dbd30e989 ARM: 6225/1: make TCM allocation static and common for all archs
This changes the TCM handling so that a fixed area is reserved at
0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but
XScale does not have TCM so the mechanisms are mutually exclusive.

This change is needed to make TCM detection more dynamic while
still being able to compile code into it, and is a must for the
unified ARM goals: the current TCM allocation at different places
in memory for each machine would be a nightmare if you want to
compile a single image for more than one machine with TCM so it
has to be nailed down in one place.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:42:38 +01:00
Russell King
8d717a52d1 ARM: Convert platform reservations to use LMB rather than bootmem
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:48:23 +01:00
Russell King
3126c7bc41 ARM: AMBA: Add pclk definition for platforms using primecells
Add a dummy clk definition for the APB pclk signal on all platforms
using the AMBA bus infrastructure.  This ensures that these platforms
continue to work when the core amba bus code controls the APB pclk.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-22 09:55:38 +01:00
Christoph Egger
82400d2c82 Removing dead MACH_U300_BS26
MACH_U300_BS26 doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-20 17:27:15 +02:00
Russell King
98c672cf1f ARM: Move platform memory reservations out of generic code
Move the platform specific bootmem memory reservations out of
arch/arm/mm/mmu.c into their respective platform files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 11:06:40 +01:00
Jiri Kosina
f1bbbb6912 Merge branch 'master' into for-next 2010-06-16 18:08:13 +02:00
Uwe Kleine-König
421f91d21a fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:05:05 +02:00
Mattias Wallin
d162251d1b ARM: AB3550 board configuration and irq for U300
This patch adds the i2c board configuration needed for the
Mixed Signal chip AB3550. It also adds the irq numbers needed
for the irq_chip implementation.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:47 +02:00
Linus Walleij
812f9e9d42 mfd: Renamed ab3100.h to abx500.h
The goal here is to make way for a more general interface for the
analog baseband chips ab3100 ab3550 ab550 and future chips.

This patch have been divided into two parts since both changing name
and content of a file is not recommended in git.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:44 +02:00
Linus Torvalds
6f68fbaafb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  DMAENGINE: extend the control command to include an arg
  async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
  DMAENGINE: DMA40 fix for allocation of logical channel 0
  DMAENGINE: DMA40 support paused channel status
  dmaengine: mpc512x: Use resource_size
  DMA ENGINE: Do not reset 'private' of channel
  ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
  ioat3: disable cacheline-unaligned transfers for raid operations
  ioat2,3: convert to producer/consumer locking
  ioat: convert to circ_buf
  DMAENGINE: Support for ST-Ericssons DMA40 block v3
  async_tx: use of kzalloc/kfree requires the include of slab.h
  dmaengine: provide helper for setting txstate
  DMAENGINE: generic channel status v2
  DMAENGINE: generic slave control v2
  dma: timb-dma: Update comment and fix compiler warning
  dma: Add timb-dma
  DMAENGINE: COH 901 318 fix bytesleft
  DMAENGINE: COH 901 318 rename confusing vars
2010-05-21 17:05:46 -07:00
Dan Williams
0b28330e39 Merge branch 'ioat' into dmaengine 2010-05-17 16:30:58 -07:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Linus Walleij
72638ddd14 ARM: 6034/1: ARM: U300: set f_max to 24 MHz for MMCI
This employs the frequency setting mechanism introduced to the
MMCI to specify that this system can actually be clocked at 24 MHz.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 16:08:18 +01:00
Linus Walleij
771dc157e0 ARM: 6032/1: ARM: MMCI: support 8bit mode on the ST Micro version
This adds support for an 8bit wide bus to the card (data lines
MCIDAT0 through 7 exist) on the ST Micro version and alters the
U300 platform to support this. Also add some ST_ prefix to the
ST-specific registers.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 16:08:17 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Linus Walleij
0793448187 DMAENGINE: generic channel status v2
Convert the device_is_tx_complete() operation on the
DMA engine to a generic device_tx_status()operation which
can return three states, DMA_TX_RUNNING, DMA_TX_COMPLETE,
DMA_TX_PAUSED.

[dan.j.williams@intel.com: update for timberdale]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Li Yang <leoli@freescale.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-26 16:50:49 -07:00
Linus Walleij
c3635c78e5 DMAENGINE: generic slave control v2
Convert the device_terminate_all() operation on the
DMA engine to a generic device_control() operation
which can now optionally support also pausing and
resuming DMA on a certain channel. Implemented for the
COH 901 318 DMAC as an example.

[dan.j.williams@intel.com: update for timberdale]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Li Yang <leoli@freescale.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-26 16:44:01 -07:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Linus Torvalds
9bb676966a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (28 commits)
  ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypes
  ioat3: interrupt coalescing
  ioat: close potential BUG_ON race in the descriptor cleanup path
  ioat2: kill pending flag
  ioat3: use ioat2_quiesce()
  ioat3: cleanup, don't enable DCA completion writes
  DMAENGINE: COH 901 318 lli sg offset fix
  DMAENGINE: COH 901 318 configure channel direction
  DMAENGINE: COH 901 318 remove irq counting
  DMAENGINE: COH 901 318 descriptor pool refactoring
  DMAENGINE: COH 901 318 cleanups
  dma: Add MPC512x DMA driver
  Debugging options for the DMA engine subsystem
  iop-adma: redundant/wrong tests in iop_*_count()?
  dmatest: fix handling of an even number of xor_sources
  dmatest: correct raid6 PQ test
  fsldma: Fix cookie issues
  fsldma: Fix cookie issues
  dma: cases IPU_PIX_FMT_BGRA32, BGR32 and ABGR32 are the same in ipu_ch_param_set_size()
  dma: make Open Firmware device id constant
  ...
2010-03-04 08:20:14 -08:00
Linus Walleij
b87108a772 DMAENGINE: COH 901 318 descriptor pool refactoring
This centralize some spread-out initialization of descriptors into
one function and cleans up the error paths.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-02 14:17:20 -07:00
Russell King
9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Russell King
2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Russell King
186f93ea1f Merge branch 'tmpreg' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-25 22:07:25 +00:00
Linus Walleij
cd71f8f48e ARM: 5958/1: ARM: U300: fix inverted clk round rate
The clk_round_rate() functions in the U300 clocking will always
select the lowest clocking frequency due to inverted rounding
comparisons. Fix this.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24 21:10:17 +00:00
Roel Kluin
fcfadcaa57 ARM: 5956/1: misplaced parentheses
The parentheses appear misplaced.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24 21:10:07 +00:00
Fenkart/Bostandzhyan
c931b4f655 ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
Makes it consistent with VMALLOC_START

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Linus Walleij
d40956665d ARM: 5935/1: [U300] Fix the DMA configuration
This fixes a few bugs in the DMA configuration for the COH 901 318
DMA engine used in U300. It also removes the directional parameter
for each channel: separate DMA engine patches (submitted to the
DMA engine maintainer) switches that mechanism over to using
dynamic configuration of this, to handle bidirectional DMA
channels.

Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-14 23:11:03 +00:00
Russell King
0a0300dc8c ARM: Consolidate clks_register() and similar
Most machine classes want some way to register a block of clk_lookup
structures, and most do it by implementing a clks_register() type
function which walks an array, or by open-coding a loop.

Consolidate all this into clkdev_add_table().

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:32:36 +00:00
Tony Lindgren
4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Daniel Mack
3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Linus Walleij
633e81a66b ARM: 5895/2: Alter name of U300 watchdog resource
This changes the bus name of the U300 watchdog from just "wdog"
to "coh901327_wdog" which is used to match the corresponding
driver. This makes the watchdog probe properly.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 22:00:47 +00:00
Linus Walleij
08d1e2e68d ARM: 5852/1: Add COH 901 318 DMA driver platform config for U300
This adds platform configuration for the COH 901 318 DMA driver
for the U300 series mobile platforms.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 22:00:15 +00:00
Linus Torvalds
7949456b1b Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  ppc440spe-adma: adds updated ppc440spe adma driver
  iop-adma.c: use resource_size()
  dmaengine: clarify the meaning of the DMA_CTRL_ACK flag
  sh: stylistic improvements for the DMA driver
  dmaengine: fix dmatest to verify minimum transfer length and test buffer size
  sh: DMA driver has to specify its alignment requirements
  Add COH 901 318 DMA block driver v5
2009-12-16 10:28:56 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Russell King
e28edb723e Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' into devel 2009-12-05 10:35:18 +00:00
Adam Buchbinder
6070d81eb5 tree-wide: fix misspelling of "definition" in comments
"Definition" is misspelled "defintion" in several comments; this
patch fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 23:41:47 +01:00
Linus Walleij
61f135b92f Add COH 901 318 DMA block driver v5
This patch adds support for the ST-Ericsson COH 901 318 DMA block,
found in the U300 series platforms. It registers a DMA slave for
device I/O and also a memcpy slave for memcpy.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:45:19 -07:00
Linus Walleij
378ce74bee ARM: 5787/1: U300 COH 901 331 fixes
This will fix some small issues with the COH 901 331 RTC driver:
- Interrupt is disabled after alarm so that we don't fire
  multiple interrupts.
- We return 0 from the coh901331_alarm_irq_enable() ridding
  a compile warning.
- We alter the name in the U300 device registry to match that
  of the driver so they sucessfully resolve.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-16 16:15:49 +00:00
Linus Walleij
6635529987 ARM: 5783/1: Make it possible for U300 LDO D to shut down
This changes the regulator platform config for U300 so that the
LDO D regulator can change status and shut down the system and
the pm_shutdown() hook in regulator.c starts working.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-10 23:47:07 +00:00
Linus Walleij
f9e8eefc60 ARM: 5725/2: U300 switch MMCI to use regulator
This switches the U300 over from using a custom translate_vdd
function (which was just flipping blind bits in the hardware)
to using the regulator that actually controls the MMC voltage.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-19 17:10:09 +01:00
Linus Walleij
3d81277b65 ARM: 5724/1: U300 AB3100 boardinfo v5
This defines regulator platform data and board power
regulator hogs for the ST-Ericsson U300 platform.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-19 17:10:09 +01:00
Linus Walleij
ee17962e24 ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3
The #ifdefs in the MMCI driver were erroneous and just masking
a bug in the U300 generic GPIO implementation. This removes the
ifdefs and fixes the U300 generic GPIO instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01 16:26:15 +01:00
Linus Walleij
6ef297f86b ARM: 5720/1: Move MMCI header to amba include dir
This moves the mmci platform data definition struct away from
arch/arm/include/asm/mach/mmc.h into the more proper place among
the other primecells in include/linux/amba/mmci.h and at the same
time renames it to "mmci.h", and also the struct in this file
confusingly named mmc_platform_data has been renamed
mmci_platform_data for clarity.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-22 20:49:04 +01:00
Russell King
59b69e27ca Merge branch 'u300' into devel 2009-09-21 16:03:13 +01:00
Linus Walleij
ee2b805c8e ARM: 5678/1: SSP/SPI PL022 polarity terminology fix
The definition of the SPI clock phase for the Motorola mode of
the PL022 driver was incorrect: the spec had been interpreted as
data being recieved on rising or falling edge of the clocks while
the correct interpretation is that data can be recieved on the
first or second edge transition, falling or rising depending on
the polarity setting.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-18 22:09:02 +01:00
Linus Walleij
a2ca00ea93 ARM: 5704/1: U300 sched_clock implementation v2
This adds the long debated sched_clock() override for the weak
in-kernel jiffybased sched_clock(). The implementation is more or
less identical to the one used in arch/arm/plat-omap/common.c
and at last attempt to merge this the merge was postponed at the
request of Peter Zijlstra due to pending discussions regarding
generalized clocksource-based sched_clock() implementations by
adding a flag to the clocksource. However that discussion ended
up with the generic code needing to be rewritten and Paul Mundt
see no reason not to proceed with this for the time being as it
can be easily converted once the generic code is in place.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-18 22:09:02 +01:00
Linus Walleij
9e6c82cd3e ARM: 5698/1: MMCI pass capabilities in platform data
This makes it possible to pass down the host controller
capabilities for the MMCI driver using the platform data. It
also provides the capabilties for the U300 implementation as an
example, and makes sure the 4bit wide mode is set if this is
requested by the ios() now that we can actually set that
capability for a platform.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:11:06 +01:00
Linus Walleij
bc581770cf ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3
This adds the TCM interface to Linux, when active, it will
detect and report TCM memories and sizes early in boot if
present, introduce generic TCM memory handling, provide a
generic TCM memory pool and select TCM memory for the U300
platform.

See the Documentation/arm/tcm.txt for documentation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:11:05 +01:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Linus Walleij
a2bb9f4d6a ARM: 5673/1: U300 fix initsection compile warning
The u300_init_check_chip() function was not properly tagged with
the __init macro and provided a initsection mismatch on
compilation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:36:52 +01:00
Linus Walleij
6be2a0cacc ARM: 5668/2: U300 I2C board setup
This sets up the U300 I2C subdevices so that the AB3100
analog baseband ASIC is properly detected and also the
camera devices in the U335 reference design get properly
registered.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:36:29 +01:00
Linus Walleij
c7c8c78fdf ARM: 5667/3: U300 SSP/SPI board setup and test
This adds a U300 board configuration for the PL022 SSP/SPI
PrimeCell driver recently merged to the 2.6.31-rc series.
Further it adds a dummy loopback SPI chip that can be used
for testing the SPI functionality on a running system using
the loopback mode of PL022.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:36:29 +01:00
Linus Walleij
df1e0520f9 ARM: 5666/1: Revamped U300 padmux API
This abstracts the hackish padmux API on the U300 platform into
something more manageable. It provides a way for drivers to
activate/deactivate a certain padmux setting. It will also switch
the users of the old API over to using the new style, pushing
muxing into the apropriate setup files.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:36:28 +01:00
Linus Walleij
5ad73d0717 ARM: 5665/1: U300 syscon register updates
This adds in a few new register and defines for improved padmux
support and some figures that were plain wrong on the targeted
U300 platforms.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:36:28 +01:00
Linus Walleij
6860107a46 [ARM] 5594/1: Correct U300 VIC init PM setting
This makes the VIC resume from suspend flagged IRQ:s identical to
the flags indicating all possible interrupts. This is perhaps not
the optimal setting but setting it to 0 makes the system suspend
and never come back again (all IRQ sources masked off).

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09 16:15:46 +01:00
Russell King
7fb2bbf4d9 MMC: MMCI: allow GPIOs to be passed
Add and initialize the gpio_wp and gpio_cd members.  We need to
ensure that all users are covered, because GPIO 0 may be valid.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2009-07-09 15:15:12 +01:00
Linus Walleij
4ebfc3dba5 [ARM] 5581/1: U300 clock updates
This adds a few default locks to the clocks (the clocks were used
before the locks were initialized by code), then renames the clocks
a bit to fit with the latest driver names (some changed during
review). Lastly it moves the initialization of the clock debugfs
entry to module_init() initcall level since the debugfs isn't up
in core_initcall().

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 17:24:39 +01:00
Russell King
b7c11ec9f1 Merge branch 'u300' into devel
Conflicts:
	arch/arm/Makefile
Updates:
	arch/arm/mach-u300/core.c
	arch/arm/mach-u300/timer.c
2009-06-14 11:01:44 +01:00
Linus Walleij
7666c17e2b [ARM] 5535/1: U300 Makefile.boot
The Makefile.boot file for the U300 port. This will compile the
kernel for different ZRELADDR depending on the location of
physical RAM in the chosen configuration.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-04 17:47:36 +01:00
Russell King
ed31b2dfad [ARM] make U300 clk_set_rate() return a _real_ errno
Another stupid instance of "return -1"-ism.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 15:08:11 +01:00
Linus Walleij
f7a9a4d782 [ARM] 5510/1: U300 GPIO debug and init fixes
This moves the GPIO driver away from using __devinit and __devexit
It also removes all printk() in favor of using dev_* print macros
on pdev->dev struct instead. Surplus prints are removed, and the
platform_device_probe() function is used instead of putting a
.probe function in the platform driver struct.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-18 16:48:55 +01:00
Linus Walleij
bb3cee2b35 [ARM] 5473/1: U300 core machine support
This adds core support for the ST-Ericsson U300 series
platforms: U300, U330, U335 and U365. Supports memory
mappings, interrupt controller, system timer (clocksource
and clockevents), and binds to the existing drivers for
the PrimeCells used in this design: PL190 (VIC), PL180
(MMC/SD host) and PL011 (UART). This is intented to serve
as starting point for our mainling work, more patches to
follow.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-28 22:44:15 +01:00
Linus Walleij
cd27e48541 [ARM] 5474/1: U300 clocking framework
This adds the clocking framework and hooks into the clkdevice
for U300 series platforms.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-28 22:44:12 +01:00
Linus Walleij
bd41b99d46 [ARM] 5471/2: U300 GPIO and PADMUX support
This adds GPIO and PADMUX headers and implementation for
the U300 platform. This is an implementation in isolation
that depend on later patches in this series to plug into
the framework.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-28 22:44:09 +01:00
Linus Walleij
fa59440d0c [ARM] 5470/1: U300 register definitions
This adds registers, interrupt numbers and IO mappings
for the U300 series platforms core support, including
basic block offsets and registers definitions for the
system controller.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-28 22:44:05 +01:00