Commit Graph

30 Commits

Author SHA1 Message Date
Krzysztof Kozlowski
84b2170109 ARM: S3C24XX: Add SPDX license identifiers
Replace GPL license statements with SPDX license identifiers (GPL-2.0
and GPL-2.0+).  The h1940-bluetooth.c was licensed under GPL-1.0.  This
also adds GPL-2.0 to few files lacking license statement.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-03 18:36:43 +01:00
Sergio Prado
e9f66ae23c mtd: s3c2410: make ecc mode configurable via platform data
Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode
field in the drivers's platform data structure so it can be selectable
via platform data.

Also setting this field to NAND_ECC_SOFT in all boards using this
driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-07 14:48:35 +01:00
Boris Brezillon
102232c546 ARM: Explicitly apply PWM config extracted from pwm_args
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:08 +02:00
Thierry Reding
c107fe904a ARM: S3C24XX: Use PWM lookup table for mach-rx1950
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13 05:04:22 +09:00
Mika Westerberg
c673a2b400 leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors
Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO
descriptors") already converted most of the driver to use GPIO descriptors.
What is still missing is the platform specific hook gpio_blink_set() and
board files which pass legacy GPIO numbers to this driver in platform data.

In this patch we handle the former and convert gpio_blink_set() to take
GPIO descriptor instead. In order to do this we convert the existing four
users to accept GPIO descriptor and translate it to legacy GPIO number in
the platform code. This effectively "pushes" legacy GPIO number usage from
the driver to platforms.

Also add comment to the remaining block describing that it is legacy code
path and we are getting rid of it eventually.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:25 +01:00
Heiko Stuebner
f6361c6b38 ARM: S3C24XX: remove separate restart code
The restart-handler series from Guenter Roeck got accepted recently and
implements among other things also the restart handler in the samsung
watchdog driver and where applicable in the clock drivers. So there is
no need for having the restart callbacks in s3c24xx boards anymore.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-14 02:43:09 +09:00
Heiko Stuebner
2916f9a2c6 ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion
This finally removes all remaining SAMSUNG_CLOCK conditional code
from s3c24xx architectures.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13 08:00:46 +09:00
Heiko Stuebner
a28d618e2e ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework
Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.

Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13 08:00:43 +09:00
Heiko Stuebner
51cb128987 ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled
Add platform device and select the correct implementation automatically
depending on wether the old samsung_clock or the common clock framework
is enabled.

This is only done for machines already using the old dclk implementation,
as everybody else should move to use dt anyway.

The machine-specific settings for the external clocks will have to be set
by somebody with knowledge about the specific hardware.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
[pebolle@tiscali.nl: pointed out typo and fixed]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13 08:00:01 +09:00
Tushar Behera
334a1c70bb ARM: SAMSUNG: Replace inclusion of plat/regs-serial.h header file
regs-serial.h only includes linux/serial_s3c.h. Include this header
directly to remove unnecessary platform dependency.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
[broonie@linaro.org: Acked for S3C64XX related changes]
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-14 10:35:00 +09:00
Linus Walleij
364374121b ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
Previously the custom GPIO header for the S3C24xx would in turn
bring in the custom pin control implementation from
<plat/gpio-cfg.h>. This is not good as it mixes up two
subsystems and makes the dependencies hard to track. Make
the dependency explicit by explicitly including the pin
control header where needed.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14 15:24:54 +01:00
Linus Walleij
b0161caa72 ARM: S3C[24|64]xx: move includes back under <mach/> scope
When refactoring and breaking out the includes for the
machine-specific GPIO configuration, two files were created
in <linux/platform_data/gpio-samsung-s3c[24|64]xx.h>, but as
that namespace shall be used for defining data exchanged
between machines and drivers, using it for these broad macros
and config settings is wrong.

Move the headers back into the machine-local
<mach/gpio-samsung.h> file and think about the next step.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14 15:24:06 +01:00
Linus Walleij
c67d0f2926 ARM: s3c24xx: get rid of custom <mach/gpio.h>
This isolates the custom S3C24xx GPIO definition table to
<linux/platform_data/gpio-samsung-s3x24xx.h> as this is
used in a few different places in the kernel, removing the
need to depend on the implicit inclusion of <mach/gpio.h>
from <linux/gpio.h> and thus getting rid of a few nasty
cross-dependencies.

We also delete the nifty CONFIG_S3C24XX_GPIO_EXTRA stuff.
The biggest this can ever be for the S3C24XX is
CONFIG_S3C24XX_GPIO_EXTRA = 128, and then for CPU_S3C2443 or
CPU_S3C2416 32*12 GPIOs are added, so 32*12+128 = 512
is the absolute roof value on this platform. So we set
the size of ARCH_NR_GPIO to this and the GPIOs array will
fit any S3C24XX platform, as per pattern from other archs.

ChangeLog v2->v3:
- Move the movement of the S3C64XX gpio.h file out of
  this patch and into the follow-up patch where it belongs.
ChangeLog v1->v2:
- Added an #ifdef ARCH_S3C24XX around the header inclusion
  in drivers/gpio/gpio-samsung.c as we would otherwise
  have colliding definitions when compiling S3C64XX.
- Rename inclusion guard in the header file.

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 18:19:26 +01:00
Thierry Reding
a63652f1a7 ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
The GPIO API defines 0 as being a valid GPIO number, so this field needs
to be initialized explicitly.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:05:57 +02:00
Tomasz Figa
7fa33bdb4c ARM: SAMSUNG: Modify board files to use new PWM platform device
This patch modifies any board files using the legacy PWM device to use
the new device instead.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Mark Brown <broonie@linaro.org>
Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-12 21:53:22 +02:00
Linus Torvalds
6fa52ed33b ARM: arm-soc driver changes for 3.10
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00
Heiko Stübner
e636602ac2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
The register definitions are only used in the driver itself.
This also removes the last dependency on plat/ includes from the
i2c driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-24 10:30:57 +01:00
Heiko Stuebner
ce6c164bf0 ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
s3c2440 and s3c2442 need separate init functions, as the s3c2440 contains
even more differing irqs that will be moved in the following patch.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:33 +09:00
Romain Naour
7f78b6eb5f ARM: S3C24XX: Add samsung-time support for s3c24xx
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
[heiko@sntech.de: tested on a s3c2416 based machine]
Reviewed-and-Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:16:38 +09:00
Olof Johansson
5b399db0b7 Merge branch 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
From Kukjin Kim:
AS I commented, this makes <mach/*.h> local so that they could be removed.

* 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (26 commits)
  ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled
  ARM: S3C64XX: make regs-syscon-power.h local
  ARM: S3C64XX: make regs-sys.h local
  ARM: S3C64XX: make regs-srom.h local
  ARM: S3C64XX: make regs-modem.h local
  ARM: S3C64XX: make regs-gpio-memport.h local
  ARM: S3C64XX: make crag6410.h local
  ARM: S3C24XX: remove dsc.c and make regs-dsc.h local
  ARM: S3C24XX: remove idle.h
  ARM: S3C2412: cleanup regs-s3c2412.h
  ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h
  ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local
  ARM: S3C24XX: make otom-map.h local
  ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local
  ARM: S3C24XX: make h1940.h and h1940-latch.h local
  ARM: S3C24XX: make gta02.h local
  ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
  ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local
  ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h
  ARM: SAMSUNG: cleanup mach/regs-audss.h file
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-04 21:49:29 -08:00
Kukjin Kim
507c4d6839 ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local
This makes the headers local in mach-s3c24xx/.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:36 -08:00
Kukjin Kim
232910d6bf ARM: S3C24XX: make h1940.h and h1940-latch.h local
The headers can be local in mach-s3c24xx/.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:35 -08:00
Stephen Warren
6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Padmavathi Venna
a08485d8fd ASoC: Samsung: Do not register samsung audio dma device as pdev
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a
platform_device. This didn't represent the hardware well, since there
was no separate hardware associated with this platform_device; it was a
virtual device with sole purpose to call snd_soc_register_platform().

This change removes the platform_device completely. Each Samsung DAI now
registers the ASoC 'platform' itself. Machine drivers are adjusted for
the new 'platform' name.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07 19:36:07 +09:00
Arnd Bergmann
436d42c61c ARM: samsung: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the samsung include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: linux-samsung-soc@vger.kernel.org
2012-09-19 17:42:18 +02:00
Sylwester Nawrocki
353ba37a09 ARM: S3C24XX: Remove unused GPIO definitions for port J
There is no need now for individual GPIO port J pin control bit
definitions, the GPIO0..12 pins can be configured using the gpiolib
API. The GPJ* register address offset definitions for S3C2413 are
moved to the common mach-s3c24xx/include/mach/regs-gpio.h header.
These are still used outside of the gpio-samsung driver by PM code.

Switching GPJ port to camera function can be done for example with:
s3c_gpio_cfgall_range(S3C2410_GPJ(0), 13, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13 18:05:29 +09:00
Tushar Behera
5f3b90dcc0 ARM: S3C24XX: Use common macro to define resources on mach-rx1950.c
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12 16:12:25 +09:00
Arnd Bergmann
f4e2467bad Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 into next/cleanup
* 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6:
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file

(update to v3.3-rc7)

Conflicts:
	arch/arm/mach-s3c2440/common.h
2012-03-15 15:20:07 +00:00
Olof Johansson
d60d506e6b Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
* 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443
  ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443
  ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443
  ARM: S3C24XX: remove obsolete S3C2416_DMA option
  ARM: S3C24XX: Reuse S3C2443 dma for S3C2416
  ARM: S3C24XX: Fix indentation of dma-s3c2443
  ARM: S3C24XX: Move device setup files to mach directory
  ARM: S3C24XX: Consolidate Simtec extensions
  ARM: S3C24XX: move simtec-specific code to mach directory
  ARM: S3C24XX: Move common-smdk code to mach directory
  ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx
  ARM: s3c2410_defconfig: update s3c2410_defconfig
  ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
  ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
  ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
  ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
  ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
  ARM: S3C2410: move s3c2410_baseclk_add to clock.h
  ...
2012-03-08 08:53:14 -08:00
Kukjin Kim
dd6f01b5cc ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
This patch moves S3C2440 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

And this patch is including following.
- re-ordered alphabetically by option text at Kconfig and Makefile

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-03 08:55:17 +09:00