Commit Graph

22 Commits

Author SHA1 Message Date
Andrew Ruder
43e2be14c1 ARM: pxa: correct errata number for PXA270
Comment incorrectly cites errata 39
    E39. SDIO: SDIO Devices Not Working at 19.5 Mbps

Should be errata 38
    E38. MEMC: Memory Controller hangs when entering Self Refresh Mode.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2014-07-04 20:30:42 +08:00
Russell King
a9503d2185 ARM: pm: pxa: move cpu_suspend into C code
We don't need a veneer for cpu_suspend, it can be called directly from
C code now.  Move it into the PXA CPU suspend functions, along with
the accumulator register saving/restoring.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24 08:48:45 +01:00
Russell King
e8856a8797 ARM: pm: convert cpu_suspend() to a normal function
cpu_suspend() has a weird calling method which makes it only possible to
call from assembly code: it returns with a modified stack pointer to
finish the suspend, but on resume, it 'returns' via a provided pointer.

We can make cpu_suspend() appear to be a normal function merely by
swapping the resume pointer argument and the link register.

Do so, and update all callers to take account of this more traditional
behaviour.

Acked-by: Frank Hofmann <frank.hofmann@tomtom.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24 08:48:43 +01:00
Russell King
dbc125168f ARM: pm: move sa1100 to use proper suspend func arg0
In the previous commit, we introduced an official way to supply an
argument to the suspend function.  Convert the sa1100 suspend code
to use this method.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24 08:48:39 +01:00
Russell King
4f5ad99bb5 ARM: pm: convert PXA to generic suspend/resume support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-22 17:11:24 +00:00
Russell King
404a02cbd2 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h
2011-01-06 22:33:32 +00:00
Aric D. Blumer
24c7855774 ARM: pxa: fix page table corruption on resume
Before this patch, the following error would sometimes occur after a
resume on pxa3xx:

    /path/to/mm/memory.c:144: bad pmd 8040542e.

The problem was that a temporary page table mapping was being improperly
restored.

The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu
to avoid a prefetch abort.  The pxa3xx_resume_after_mmu code requires
that the r1 register holding the address of this mapping not be
modified, however, resume_turn_on_mmu does modify it. It is mostly
correct in that r1 receives the base table address, but it may also
get other bits in 13:0.  This results in pxa3xx_resume_after_mmu
restoring the original mapping to the wrong place, corrupting memory
and leaving the temporary mapping in place.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-03 23:18:59 +08:00
Marek Vasut
ad68bb9f7a ARM: pxa: Access SMEMC via virtual addresses
This is important because on PXA3xx, the physical mapping of SMEMC registers
differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx
and PXA320, the PCMCIA driver was adjusted accordingly as well.

Also, various places in the kernel had to be patched to use
__raw_read/__raw_write.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16 14:31:16 +08:00
Christoph Egger
8973860a22 [ARM] pxa: removing dead XSCALE_CACHE_ERRATA
XSCALE_CACHE_ERRATA doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:33 +08:00
Eric Miao
5bf3df3f00 [ARM] pxa: separate definitions from pxa-regs.h and remove it finally
The remaining registers are separated into:

   - <mach/regs-ost.h>
   - <mach/regs-rtc.h>
   - <mach/regs-intc.h>

and then we can remove pxa-regs.h completely. Instead of #include this
file, let's:

1. include the specific <mach/regs-*.h> with care (if that's absolutely
   necessary)

2. define the registers in the driver, make cleanly defined API to expose
   the register access to external with sufficient reason

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:40 +08:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King
be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
eric miao
c4d1fb627f [ARM] pxa: add preliminary suspend/resume code for pxa3xx
1. clear RDH bit after resuming back from D3, otherwise, the multi function
   pins will retain the low power state

2. save/restore essential system registers

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:17:33 +00:00
Russell King
533462fba5 [ARM] pxa: omit PXA25x or PXA27x standby/sleep code as appropriate
There's no point building standby/sleep code for processors which
aren't configured.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:56 +00:00
Russell King
8785a8fbd5 [ARM] pxa: move memory controller registers into pxa2xx-regs.h
PXA3 has a different memory controller from PXA2 platforms.  Avoid
clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:54 +00:00
Russell King
3b1904d00a [ARM] pxa: don't rely on r2 being preserved over a function call
r2 is not guaranteed to be preserved over a function call, so relying
on it to store the link register over the call to sleep_phys_sp() is
unreliable.  Store the link register on the stack instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-20 10:09:59 +00:00
Eric Miao
b750a09385 [ARM] 4489/1: pxa: split pxa_cpu_suspend to processor specific ones
1. split pxa_cpu_suspend to pxa25x_cpu_suspend and pxa27x_cpu_suspend
   and make pxa25x_cpu_pm_enter() and pxa27x_cpu_pm_enter() to invoke
   the corresponding _suspend functions, thus remove all those ugly
   #ifdef .. #endif out of sleep.S

2. move the declarations of those suspend functions to pm.h

note: this is not a clean enough solution until all the pxa25x and
pxa27x specific part is further removed out of sleep.S, sleep.S is
supposed to contain generic code only

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 17:25:20 +01:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Russell King
801194e3bc [ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ
DEFAULT_FIQ was entirely unused.  MODE_* are just redefinitions
of *_MODE.  Use *_MODE instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 12:01:48 +01:00
Todd Poynor
80a18573ce [ARM] 2787/2: PXA27x low power modes support
Patch from Todd Poynor

Add symbols for PXA2xx PWRMODE register M field that selects low-power
mode, replace unadorned constants.  Honor power mode parameter of
pxa_cpu_suspend(mode), no longer force to 3 (sleep).  Full Deep Sleep
low-power mode support for PXA27x is pending generic PM interfaces to
select more than 2 suspend-to-RAM-style power modes, but this is
expected soon. This can be hardcoded in the meantime by replacing the
pxa_cpu_suspend() parameter value.  From David Burrage and Todd Poynor.
Try #2 removes one of the register copies and moves the code to save the
pxa_cpu_suspend parameter to immediately surround the call that requires
the parameter value be preserved.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 16:25:01 +01:00
Jeff Lackey
41130d37a4 [PATCH] ARM: 2650/1: PXA27x sleep - workaround Errata 39 & 50 (Patch 2667)
Patch from Jeff Lackey

This patch updates arch/arm/mach-pxa/sleep.S to support
the PXA270 CPU.  It works around Errata 39 & 50 from the
Intel(R) PXA27x Processor Family Specification Update.

Signed-off-by: Jeff Lackey
Signed-off-by: Russell King
2005-04-25 23:38:55 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00