Commit Graph

40 Commits

Author SHA1 Message Date
Robert Jarzmik
32f17997c1 ARM: pxa: remove irq init from dt machines
The init_irq and handle_irq can be declared through standard irqchip
declaration and are not necessary in machine descriptions.

This is another step towards the generic kernel for the pxa
architecture.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-09-09 18:08:01 +02:00
Robert Jarzmik
ca5be4c678 ARM: pxa: prepare pxa25x interrupts for device-tree platforms
Add the device-tree interrupts initialization function required to have
a generic pxa25x device-tree machine.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-08-09 08:16:58 +02:00
Robert Jarzmik
a1c0a6adbc ARM: pxa: Transition pxa25x, pxa27x, pxa3xx to clk framework
Transition the PXA25x, PXA27x and PXA3xx CPUs to the clock framework.
This transition still enables legacy platforms to run without device
tree as before, ie relying on platform data encoded in board specific
files.

This is the last step of clock framework transition for pxa
platforms. It was tested on lubbock (pxa25x), mioa701 (pxa27x) and
zylonite (pxa3xx).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-05-12 23:26:46 +02:00
Robert Jarzmik
5e1d012851 ARM: pxa: change clocks init sequence
Since pxa clocks were ported to the clock framework, an ordering issue
appears between clocks and clocksource initialization. As a consequence,
the pxa timer clock cannot be acquired in pxa_timer, and is disabled by
clock framework because it is "unused".

The ordering issue is that in the kernel boot sequence :
  start_kernel()
    ...
    time_init()
      -> pxa_timer()
        -> here the clocksource is initialized
    ...
    rest_init()
      kernel_init()
	initcalls
	  -> here the clocks are initialized

In the current sequence, the clocks are initialized way after pxa_timer,
which cannot acquire the OSTIMER0 clock.

To solve this issue, the clocks initialization is moved to pxa_timer(),
so that clocks are initialized before clocksource for non device-tree.
For device-tree, the standard arm time_init() will take care of the
ordering.

Reviewed-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-05-12 23:26:25 +02:00
Robert Jarzmik
4508f77517 arm: pxa: move init functions into generic.h
In order to have a unique .c file for all pxa variants device-tree
definitions, all the initialization functions for MACHINE_START and
DT_MACHINE_START have been put together into generic.h.

The alternative would have been one pxaXXX-dt.c file per variant.

The move is necessary because each include/mach/pxaXXX.h includes the
variant register descriptions which intersects and conflicts one with
each other.

The change is a preparation for pxa-dt.c to support multiple pxa,
ie. pxa3xx and pxa27x.

The machine files including mach/pxaXXX.h all include generic.h, which
guarantees no regression should be introduced.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 23:53:14 +01:00
Robin Holt
7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Stephen Warren
6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Haojian Zhuang
0c7de34be3 ARM: pxa: remove duplicated registeration on pxa-gpio
Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700.

Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver,
but it still exists in arch-pxa directory. It resulsts failure on
reboot and suspend.

Now remove the registration code in arch-pxa.

Reported-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-06 14:40:59 +08:00
Russell King
271a74fc87 ARM: restart: pxa: use new restart hook
Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05 12:57:17 +00:00
Eric Miao
ca0e687c8e ARM: pxa: move declarations from generic.h to <soc>.h
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-12 19:50:32 +08:00
Rafael J. Wysocki
2eaa03b5be ARM / PXA: Use struct syscore_ops for "core" power management
Replace sysdev classes and struct sys_device objects used for "core"
power management by the PXA platform code with struct syscore_ops
objects that are simpler.

This reduces the code size and the kernel memory footprint.  It also
is necessary for removing sysdevs entirely from the kernel in the
future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-24 19:16:09 +02:00
Lennert Buytenhek
a3f4c927d3 ARM: PXA SoCs: irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13 17:18:56 +01:00
Haojian Zhuang
a4553358d9 ARM: pxa: support pxa95x
The core of PXA955 is PJ4. Add new PJ4 support. And add new macro
CONFIG_PXA95x.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-18 21:02:14 +08:00
Eric Miao
2a125dd56b ARM: pxa: remove get_memclk_frequency_10khz()
Introduce 'struct clk' for memory and remove
get_memclk_frequency_10khz().

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16 14:31:19 +08:00
Marek Vasut
851982c1b6 ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish
between PXA25x/PXA27x and PXA3xx memory mapping.

Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io()
and pxa3xx_map_io() is included.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16 14:31:15 +08:00
Haojian Zhuang
799929d704 ARM: pxa: reduce the scope of get_memclk_frequency_10khz()
Up to now, only pxa2xx pcmcia driver is using the API. No other device driver
is using this API in PXA3xx or any other PXA silicons.

Restrict the scope only on pxa2xx and remove the implementation of pxa3xx. So
we can avoid oo much checking on cpuid after more pxa chips supported.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:31 +08:00
Russell King
be37030274 ARM: Remove DISCONTIGMEM support
Everything should now be using sparsemem rather than discontigmem, so
remove the code supporting discontigmem from ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
Russell King
cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00
Marek Vasut
918c71c0ff [ARM] pxa: add missing declaration of pxa26x_init_irq()
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-13 12:10:36 +08:00
Eric Miao
3b8e285c21 [ARM] pxa: move declaration of 'pxa_last_gpio' into <mach/gpio.h>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:37 +08:00
Eric Miao
a58fbcd8ad [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
This is part of the work making gpio.c generic enough, the changes
include:

1. move IRQ handling of GPIO 0 and 1 outside (and back into irq.c)

2. pxa_init_gpio() accepts a range for muxed GPIO IRQs, and an IRQ
   number for the muxed GPIOs

3. __gpio_is_occupied() and __gpio_is_inverted() are made inline,
   and are moved into <mach/gpio.h> instead of generic gpio.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:37 +08:00
Eric Miao
5a3d965190 [ARM] pxa: better MFP low power state support for pxa25x/pxa27x
When configured as a specific low power state: MFP_LPM_DRIVE_LOW,
MFP_LPM_DRIVE_HIGH, the corresponding GPDR register bit during
low power mode shall be re-configured as output (if they are not
configured so), thus the PGSRx bits can output.

Create an additional low power values GPDR registers, and properly
save/restore the GAFR + GPDR registers when doing suspend/resume.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:20 +01:00
Eric Miao
04fef228fb [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage
Due to the problem of reset status bits being handled by different
registers between pxa2xx and pxa3xx, introduce a global reset_status
variable, initialized by SoC-specific code and later being used by
other drivers.

And also introduce clear_reset_status(), which is used to clear the
corresponding status bits. Pass RESET_STATUS_ALL to clear all bits.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-08-05 09:26:02 +08:00
eric miao
3d3934c357 [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h
for use by other platforms

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:04 +01:00
eric miao
4be35e236c [ARM] pxa: move mfp sysdev registeration out for suspend/resume order
MFP configurations after resume should be done before the GPIO registers
are restored.  Move the mfp sysdev registeration to the same place where
GPIO and IRQ sysdev(s) are registered to better control the order.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:04 +01:00
eric miao
b9e25aced3 [ARM] pxa: merge assignment of set_wake into pxa_init_{irq,gpio}()
To further clean up the GPIO and IRQ structure:

1. pxa_init_irq_gpio() and pxa_init_gpio() combines into a single
   function pxa_init_gpio()

2. assignment of set_wake merged into pxa_init_{irq,gpio}() as
   an argument

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:04 +01:00
eric miao
f6fb7af476 [ARM] pxa: integrate low IRQ chip (ICIP) and high IRQ chip (ICIP2) into one
This makes the code better organized and simplified a bit.  The change
will lose a bit of performance when performing IRQ ack/mask/unmask,but
that's not too much after checking the result binary.

This patch also removes the ugly #ifdef CONFIG_PXA27x .. #endif by
carefully not to access those pxa{27x,3xx} specific registers, this
is done by keeping an internal IRQ number variable.  The pxa-regs.h
is also modified so registers for IRQ > PXA_IRQ(31) are made public
even if CONFIG_PXA{27x,3xx} isn't defined (for pxa25x's sake)

The incorrect assumption in the original code that internal irq starts
from 0 is also corrected by comparing with PXA_IRQ(0).

"struct sys_device" for the IRQ are reduced into one single device on
pxa{27x,3xx}.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:04 +01:00
eric miao
e3630db1fa [ARM] pxa: move GPIO IRQ specific code out of irq.c into gpio.c
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:03 +01:00
Philipp Zabel
1c44f5f16f gpiolib support for the PXA architecture
This adds gpiolib support for the PXA architecture:
  - move all GPIO API functions from generic.c into gpio.c
  - convert the gpio_get/set_value macros into inline functions

This makes it easier to hook up GPIOs provided by external chips like
ASICs and CPLDs.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Minor ARM fixup from David Brownell folded into this ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:13 -08:00
eric miao
16dfdbf038 [ARM] pxa: introduce sysdev for GPIO register saving/restoring
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:17:33 +00:00
eric miao
c016550490 [ARM] pxa: introduce sysdev for IRQ register saving/restoring
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:17:33 +00:00
eric miao
2c8086a5d0 [ARM] pxa: PXA3xx base support
Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15 18:53:43 +01:00
eric miao
c95530c779 [ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c
a function pxa_init_irq_set_wake() was introduced, so that
processor specific code could install their own version

code setting PFER and PRER registers within pxa_gpio_irq_type
are removed, and the edge configuration is postponed to the
(*set_wake) and copies the GRER and GFER register, which will
always be set up correctly by pxa_gpio_irq_type()

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:15:33 +01:00
eric miao
30f0b40844 [ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variable
This definition produces processor specific code in generic function
pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x
and pxa27x in a single zImage.

As David Brownell suggests, make it a run-time variable and initialize
at run-time according to the number of GPIOs on the processor. For now
the initialization happens in pxa_init_irq_gpio(),  since there is
already a parameter for that, besides, this is and MUST be earlier
than any subsequent calls to pxa_gpio_mode().

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:15:32 +01:00
Russell King
a88a447d44 [ARM] pxa: remove get_lcdclk_frequency_10khz()
get_lcdclk_frequency_10khz() is now redundant, remove it.  Hide
pxa27x_get_lcdclk_frequency_10khz() from public view.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:15:25 +01:00
Russell King
15a4033354 [ARM] pxa: fix naming of memory/lcd/core clock functions
Rename pxa25x and pxa27x memory/lcd/core clock functions, and
select the correct version at run time.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:14:52 +01:00
Russell King
46c41e62a1 [ARM] pxa: move platform devices to separate header file
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Russell King
34f3231f43 [ARM] pxa: move device registration into CPU-specific file
This allows individual CPU support to determine which platform
devices should be registered.  Also fix a copy-n-paste bug in
the I2C power platform device entry.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Eric Miao
cd49104d99 [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
/* should be ok this time, I aligned this patch to your arm:pxa2.mbox */

1. move pxa25x specific IRQ initialization code to pxa25x_init_irq()
and pxa27x code to pxa27x_init_irq(), remove pxa_init_irq()

2. replace all pxa_init_irq() with their PXA25x or PXA27x specific
functions

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:15 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00