Commit Graph

181 Commits

Author SHA1 Message Date
Ben Hutchings
288379f050 net: Remove redundant NAPI functions
Following the removal of the unused struct net_device * parameter from
the NAPI functions named *netif_rx_* in commit 908a7a1, they are
exactly equivalent to the corresponding *napi_* functions and are
therefore redundant.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:33:50 -08:00
Neil Horman
908a7a16b8 net: Remove unused netdev arg from some NAPI interfaces.
When the napi api was changed to separate its 1:1 binding to the net_device
struct, the netif_rx_[prep|schedule|complete] api failed to remove the now
vestigual net_device structure parameter.  This patch cleans up that api by
properly removing it..

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22 20:43:12 -08:00
Stephen Hemminger
008298231a netdev: add more functions to netdevice ops
This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:14:53 -08:00
Francois Romieu
8b4ab28dae r8169: convert to net_device_ops
Based upon a patch by Stephen Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:42:45 -08:00
David S. Miller
babcda74e9 drivers/net: Kill now superfluous ->last_rx stores.
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.

Drivers need not do it any more.

Some cases had to be skipped over because the drivers
were making use of the ->last_rx value themselves.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 21:11:17 -08:00
Francois Romieu
e383d56487 r8169: revert "read MAC address from EEPROM on init"
This reverts commit 7bf6bf4803.

The code has both a short existence and an increasing track of failures
despite some work to amend it for -rc1.  It is not just a matter of
reading the eeprom: sometimes the eeprom is read correctly, then the mac
address is not written correctly back into the mac registers.

Some chipsets seem to work reliably but it is not clear at this point if
the code can simply be made to work on a per-chipset basis and post -rc1
is not the place where I want to experiment these things.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 09:35:05 -07:00
Francois Romieu
e1564ec938 r8169: checks against wrong mac addresse init
Checking the signature of the eeprom and the validity of the
MAC address should be enough to filter out the bad addresses
observed so far.

Contributed by Ivan Vecera and Martin Capitanio.

Tested on 8102el, 8168b and 8169 for a start.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-22 06:22:06 -04:00
Francois Romieu
cd926c7330 r8169: verbose mac address init
I prefer the debug information to be displayed until
the issue is properly handled.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-22 06:22:04 -04:00
Petr Vandrovec
738e1e694b r8169: NULL pointer dereference on r8169 load
mmio_addr in r8169 needs to be initialized before use

Maybe that all tp-> initialization should be moved before rtl_init_mac_address call,
but this is enough to get rid of crash in rtl_rar_set due to mmio_addr being uninitialized.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-12 20:58:29 -07:00
Francois Romieu
1765f95d2d r8169: add shutdown handler
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:09:12 +02:00
Francois Romieu
5b538df9de r8169: preliminary 8168d support
Taken from Realtek's 8.007.00 r8168 driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Ivan Vecera <ivecera@redhat.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:09:07 +02:00
Francois Romieu
7f3e3d3a69 r8169: support additional 8168cp chipset
Taken from Realtek's 8.007.00 r8168 driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Ivan Vecera <ivecera@redhat.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:09:04 +02:00
Francois Romieu
ef808d502c r8169: change default behavior for mildly identified 8168c chipsets
The addition of a new device has so far implied a specialization of
these masks. While they identify 8168c devices, they can be expected
to be further refined as they have been by Realtek so far.

The change should bring the driver closer to the version 8.006.00 of
Realtek's 8168 driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:09:00 +02:00
Francois Romieu
ef3386f00f r8169: add a new 8168cp flavor
Taken from Realtek's 8.006.00 r8168 driver.

I have left some bits related to jumbo frame aside for now.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:55 +02:00
Francois Romieu
6fb07058d2 r8169: add a new 8168c flavor (bis)
Taken from Realtek's 8.006.00 r8168 driver.

I have left some bits related to jumbo frame aside for now.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:50 +02:00
Francois Romieu
197ff761db r8169: add a new 8168c flavor
Taken from Realtek's 8.006.00 r8168 driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:47 +02:00
Francois Romieu
b726e493e8 r8169: sync existing 8168 device hardware start sequences with vendor driver
This part of the driver should be reasonably in line with Realtek's
8.006.00 driver.

I have left some bits related to jumbo frame and optional features
aside for now.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:42 +02:00
Francois Romieu
2e68ae4430 r8169: 8168b Tx performance tweak
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:37 +02:00
Francois Romieu
219a1e9d46 r8169: make room for more specific 8168 hardware start procedure
Broadly speaking the 8168c* share some common code which will
be factored in __rtl_hw_start_8168cp. The 8168b* share some
code too but it will be a bit different.

Any change of behavior should be confined to the currently
unidentified 8168 chipsets. They will not be applied the Tx
performance tweak and will emit a warning instead.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:34 +02:00
Francois Romieu
b836390159 r8169: shuffle some registers handling around (8168 operation only)
I can not argue strongly for (or against) a specific ordering
on a purely technical ground but the patch avoids to swallow
Realtek's changes in one big, hard-to-read gulp.

Let aside the way the RxConfig register is written (see
rtl_set_rx_tx_config_registers / RxConfig / rtl_set_rx_mode),
this change brings the registers write ordering closer with
Realtek's driver one (version 8.006.00) for the 8168 chipsets.

More 8168 specific code which touches the Configx registers will
be added in the section covered by Cfg9346_UnLock / Cfg9346_Lock.

This code should not be the cause of regression for 810x and
8110 users.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:30 +02:00
Francois Romieu
236b8082aa r8169: new phy init parameters for the 8168b
The new parameters are synced with Realtek's driver
version 8.006.00.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:25 +02:00
Francois Romieu
f50d427542 r8169: update phy init parameters
The modified parameters are synced with Realtek's driver
version 8.006.00.

The change should only be noticeable with some 8168c.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10 23:08:22 +02:00
Francois Romieu
a2de6b89b7 r8169: wake up the PHY of the 8168
This is typically needed when some other OS puts the PHY
to sleep due to the disabling of WOL options in the BIOS
of the system.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Chiaki Ishikawa <chiaki.ishikawa@ubin.jp>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Cc: RyanKao <ryankao@realtek.com.tw>
2008-10-10 23:07:58 +02:00
Francois Romieu
df58ef51ca r8169: fix early spinlock use
rtl8169_init_one
-> rtl_init_mac_address
   -> rtl_rar_set
      -> spin_lock_irq(&tp->lock);
[...]
-> spin_lock_init(&tp->lock);

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:35:58 -07:00
Bruno Prémont
8b76ab3919 r8169: WoL fixes, part 2.
Since recent kernel (2.6.26 or 2.6.27) the PCI wakeup functions are
influenced by generic device ability and configuration when enabling
PCI-device triggered wake-up.

This patch causes WoL setting to enable/disable device's wish to
be permitted to wake-up the host when changing WoL options and
also during device probing.

Without this patch one has write 'enabled' to
  /sys/bus/pci/devices/0000:02:08.0/power/wakeup

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:06:25 -07:00
Bruno Prémont
20037fa407 r8169: WoL fixes, part 1.
When probing the chip and handling it's power management settings
also remember wether WoL feature is enabled.

Without this patch one has to call ethtool to change WoL settings
for this flag to be set and any WoL being enabled on suspend to
RAM.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:05:03 -07:00
Ivan Vecera
7bf6bf4803 r8169: read MAC address from EEPROM on init
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 15:40:51 -07:00
Harvey Harrison
b39d66a81f drivers/net: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:59:00 -04:00
Francois Romieu
523a609496 r8169: fix RxMissed register access
- the register is defined for the 8169 chipset only and there is
  no 8169 beyond RTL_GIGA_MAC_VER_06.
- only the lower 3 bytes of the register are valid

Fixes:
1. http://bugzilla.kernel.org/show_bug.cgi?id=10180
2. http://bugzilla.kernel.org/show_bug.cgi?id=11062 (bits of)

Tested by Hermann Gausterer and Adam Huffman.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:48:54 -04:00
Jeff Garzik
9389523a77 Merge branch 'r8169-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-next 2008-09-03 10:21:20 -04:00
Francois Romieu
a866bbf6aa r8169: balance pci_map / pci_unmap pair
The leak hurts with swiotlb and jumbo frames.

Fix http://bugzilla.kernel.org/show_bug.cgi?id=9468.

Heavily hinted by Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Timothy J Fontaine <tjfontaine@atxconsulting.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27 05:16:24 -04:00
Francois Romieu
2857ffb7b8 r8169: additional 8101 and 8102 support
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-08-17 15:53:05 +02:00
Francois Romieu
dacf815434 r8169: add hw start helpers for the 8168 and the 8101
This commit triggers three 'defined but not used' warnings but
I prefer avoiding to tie these helpers to a specific change in
the hw start sequences of the 8168 or of the 8101.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-08-17 15:53:05 +02:00
Francois Romieu
f162a5d1b3 r8169: add 8168/8101 registers description
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-08-17 15:53:05 +02:00
Francois Romieu
9c14ceafa5 r8169: use pci_find_capability for the PCI-E features
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-08-17 15:53:04 +02:00
Francois Romieu
458a9f617a r8169: Tx performance tweak helper
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-08-17 15:53:04 +02:00
Francois Romieu
ccdffb9a88 r8169: get ethtool settings through the generic mii helper
It avoids to report unsupported link capabilities with
the fast-ethernet only 8101/8102.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Martin Capitanio <martin@capitanio.org>
Fixed-by: Ivan Vecera <ivecera@redhat.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-08-17 15:53:04 +02:00
Marcus Sundberg
77332894c2 r8169: avoid thrashing PCI conf space above RTL_GIGA_MAC_VER_06
The magic write to register 0x82 will often cause PCI config space on
my 8168 (PCI ID 10ec:8168, revision 2. mounted in an LG P300 laptop)
to be filled with ones during driver load, and thus breaking NIC
operation until reboot. If it does not happen on first driver load it
can easily be reproduced by unloading and loading the driver a few
times.

The magic write was added long ago by this commit:

Author: François Romieu <romieu@fr.zoreil.com>
Date:   Sat Jan 10 06:00:46 2004 -0500

     [netdrvr r8169] Merge of changes done by Realtek to rtl8169_init_one():
     - phy capability settings allows lower or equal capability as suggested
       in Realtek's changes;
     - I/O voodoo;
     - no need to s/mdio_write/RTL8169_WRITE_GMII_REG/;
     - s/rtl8169_hw_PHY_config/rtl8169_hw_phy_config/;
     - rtl8169_hw_phy_config(): ad-hoc struct "phy_magic" to limit duplication
       of code (yep, the u16 -> int conversions should work as expected);
     - variable renames and whitepace changes ignored.

As the 8168 wasn't supported by that version this patch simply removes
the bogus write from mac versions <= RTL_GIGA_MAC_VER_06.

[The change above makes sense for the 8101/8102 too -- Ueimor]

Signed-off-by: Marcus Sundberg <marcus@ingate.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2008-07-20 19:49:30 +02:00
Francois Romieu
f887cce8de r8169: multicast register update
The layout of the 8101 series is identical to that of the 8168 one,
thus allowing to pack everything not 8169 related above MAC_VER_06.
New 810x and 8168 chipsets should automagically behave correctly.

It matches code in Realtek's 1.008.00 8101 and 8.007.00 8168 drivers.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2008-07-20 19:48:20 +02:00
Francois Romieu
865c652d6b r8169: remove non-napi code
It will almost unavoidably cause some breakage but it
is long overdue.

The driver identification string has been updated, a
lost tabulation and some unused code have been removed.
Otherwise the code paths should stay the same.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-06-29 15:08:28 +02:00
Francois Romieu
1087f4f4af r8169: multicast register update (sync with Realtek's 8.004.00 8168 driver)
The layout of the 8168 serie is different from that of the 8110 one.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-06-29 15:08:28 +02:00
Ivan Vecera
21e197f231 r8169: fix oops in r8169_get_mac_version
r8169_get_mac_version crashes when it meets an unknown MAC
due to tp->pci_dev not being set. Initialize it early.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2008-04-17 22:48:41 +02:00
Roel Kluin
cee60c377d r8169: fix past rtl_chip_info array size for unknown chipsets
'i' is unsigned.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2008-04-17 22:35:54 +02:00
Francois Romieu
cadf1855e9 r8169: fix missing loop variable increment
Spotted-by: Citizen Lee <citizen_lee@thecus.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12 17:41:04 -05:00
David S. Miller
d1d08d1265 [NET]: Fix drivers to handle napi_disable() disabling interrupts.
When we add the generic napi_disable_pending() breakout
logic to net_rx_action() it means that napi_disable()
can cause NAPI poll interrupt events to be disabled.

And this is exactly what we want.  If a napi_disable()
is pending, and we are looping in the ->poll(), we want
->poll() event interrupts to stay disabled and we want
to complete the NAPI poll ASAP.

When ->poll() break out during device down was being handled on a
per-driver basis, often these drivers would turn interrupts back on
when '!netif_running()' was detected.

And this would just cause a reschedule of the NAPI ->poll() in the
interrupt handler before the napi_disable() could get in there and
grab the NAPI_STATE_SCHED bit.

The vast majority of drivers don't care if napi_disable() might have
the side effect of disabling NAPI ->poll() event interrupts.  In all
such cases, when a napi_disable() is performed, the driver just
disabled interrupts or is about to.

However there were three exceptions to this in PCNET32, R8169, and
SKY2.  To fix those cases, at the subsequent napi_enable() points, I
added code to ensure that the ->poll() interrupt events are enabled in
the hardware.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by:  Don Fry <pcnet32@verizon.net>
2008-01-08 23:30:12 -08:00
Al Viro
95e0918dbb r8169 endianness
missing conversions in a couple of places

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-22 22:53:07 -05:00
Francois Romieu
a6baf3af89 r8169: prevent bit sign expansion error in mdio_write
Oops.

The current code does not like being given an u16 with the highest
bit set as an argument to mdio_write. Let's enforce a correct range of
values for both the register address and value (resp. 5 and 16 bits).

The callers are currently left as-is.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-11-10 04:25:16 -05:00
Mark Lord
50d84c2dc0 r8169: revert 7da97ec96a (bis repetita)
RTL_GIGA_MAC_VER_17 breaks as well.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-11-10 04:25:15 -05:00
Mark Lord
b9d04e2401 r8169: revert 7da97ec96a (partly)
Various symptoms depending on the .config options:
- the card stops working after some (short) time
- the card does not work at all
- the card disappears (nothing in lspci/dmesg)

A real power-off is needed to recover the card.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-11-10 04:25:10 -05:00
Francois Romieu
66ec5d4fb1 r8169: do not enable the TBI for the 8168 and the 81x0
The 8168c and the 8100e choke on it. I have not seen an indication
nor received a report that the TBI is being actively used on the
remaining 8168b and 8110. Let's disable it for now until someone
complains.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Matthias Winkler <m.winkler@unicon-ka.de>
Cc: Maarten Vanraes <maarten.vanraes@gmail.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-11-10 04:25:09 -05:00