Before mirroring support was added, the pageio descriptor's pg_lseg was
set to null when an RPC was sent. Because of this, pg_init was called
at lseg boundaries with pg_lseg = NULL, and it could be set to the new
lseg.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
With pgio refactoring in v3.15, .init_read and .init_write can be
called with valid pgio->pg_lseg. file layout was fixed at that time
by commit c6194271f (pnfs: filelayout: support non page aligned
layouts). But the generic helper still needs to be fixed.
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
The flexfile layout is a new layout that extends the
file layout. It is currently being drafted as a specification at
https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Tao Peng <bergwolf@primarydata.com>
When resending to MDS, we might resend multiple mirroring
requests to MDS. As a result, nfs_direct_good_bytes() ends
up counting bytes multiple times, causing application to
get wrong return results in read/write syscalls.
Fix it by tracking start of a dreq and checking the range of
pgio header.
Cc: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Use it to indicate that LD wants to retry layoutget. LD can set
it whenever it wants the common pnfs code to return and retry
pnfs path through a new layout.
The bit gets cleared when client does a new layoutget, when client
closes the file (ROC case), or when kernel needs to evict the inode
(non-ROC case).
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Otherwise we'll lose error tracking information when
encoding layoutreturn.
pnfs_put_lseg may be called from rpc callbacks. So we should not
call pnfs_send_layoutreturn directly because it can deadlock in
the rpc layer.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
When it is set, generic pnfs would try to send layoutreturn right
before last close/delegation_return regard less NFS_LAYOUT_ROC is
set or not. LD can then make sure layoutreturn is always sent
rather than being omitted.
The difference against NFS_LAYOUT_RETURN is that
NFS_LAYOUT_RETURN_BEFORE_CLOSE does not block usage of the layout so
LD can set it and expect generic layer to try pnfs path at the
same time.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
So that callers can specify which range to return.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
If current IO cannot be completed due to some transient errors,
LD may want to ask generic layer to resend the request through
pnfs again.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Let it return current nfs_pgio_mirror in use depending on pg_mirror_count.
For read, we always use pg_mirrors[0], so this effectively gives us freedom
to use pg_mirror_idx to track the actual mirror to read from through out the
IO stack.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
so that we don't reset desc->pg_mirror_idx for read unnecessarily.
Remove WARN_ON_ONCE from __nfs_pageio_add_request to allow LD to
set pg_mirror_idx for read where pg_mirror_count is always 1.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
So that we can detect the case if some layout segments are still
pinned which is surely a bug that we need to fix.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
This skips the WARN_ON_ONCE, but doesnt change behavior (the memcmp would
fail).
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
The current mirroring code only notices short writes to the first
mirror. This patch keeps per-mirror byte counts and only considers
a byte to be written once all mirrors report so.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
This patch adds mirrored write support to the pgio layer. The default
is to use one mirror, but pgio callers may define callbacks to change
this to any value up to the (arbitrarily selected) limit of 16.
The basic idea is to break out members of nfs_pageio_descriptor that cannot
be shared between mirrored DSes and put them in a new structure.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Instead of calling layoutreturn directly, call pnfs_error_mark_layout_for_return
to mark layouts for return and let generic code return layout when
layout segments are freed.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Conflicts:
fs/nfs/filelayout/filelayout.c
So that pnfs path is not disabled for ever.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
If current lseg is the last lseg marked with NFS_LSEG_LAYOUTRETURN,
send layoutreturn.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
And if we are to return the same type of layouts, don't bother
sending more layoutgets.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.
It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It allows to specify different iomode to return.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
So that it is possible to return a specific iomode layouts.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Flexfiles layout would want to use them to report DS IO status.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.
In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Enable pNFS callbacks to allow flex files to work correctly with a
NFSv3-enabled data server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
so that flexfile layout client can pass in DS credential instead of
using user cred, which will be done in the next patch.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
flexclient needs this as there is no nfs_server to DS connection.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
pnfs flexfile layout client may want to use NFSv3 ops rather
than the default MDS v4 ops.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
flexfile layout may need to set such when making DS connections.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
The flexfiles layout wants to create DS connection over NFSv3.
Add nfs3_set_ds_client to allow that to happen.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
They can be reused by flexfile layout as well.
Also add a code such that if read fails on one DS and
there are other DSes available to use, don't resend
through MDS but through pNFS so that client can read
from other DSes.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
flexfile layout may use different auth flavor as specified by MDS.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It can be reused by flexfiles layout client.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It can be reused by flexfile layout.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs.
They can all be reused by flexfile layout as well.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
The flexfilelayout driver will share some common code
with the filelayout driver. This set of changes refactors
that common code out to avoid any module depenencies.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
These tests are off by one because if len == sizeof(nfs_export_path)
then we have truncated the name.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Most filesystems prevent truncation of an active swapfile by way of
inode_newsize_ok, called from inode_change_ok. NFS doesn't call either
from nfs_setattr, presumably because most of these checks are expected
to be done server-side. However, the IS_SWAPFILE check can only be done
client-side, and truncating a swapfile can't possibly be good.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Bruce reported seeing this warning pop when mounting using v4.1:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1121 at kernel/sched/core.c:7300 __might_sleep+0xbd/0xd0()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810ff58f>] prepare_to_wait+0x2f/0x90
Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer ppdev joydev snd virtio_console virtio_balloon pcspkr serio_raw parport_pc parport pvpanic floppy soundcore i2c_piix4 virtio_blk virtio_net qxl drm_kms_helper ttm drm virtio_pci virtio_ring ata_generic virtio pata_acpi
CPU: 1 PID: 1121 Comm: nfsv4.1-svc Not tainted 3.19.0-rc4+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153950- 04/01/2014
0000000000000000 000000004e5e3f73 ffff8800b998fb48 ffffffff8186ac78
0000000000000000 ffff8800b998fba0 ffff8800b998fb88 ffffffff810ac9da
ffff8800b998fb68 ffffffff81c923e7 00000000000004d9 0000000000000000
Call Trace:
[<ffffffff8186ac78>] dump_stack+0x4c/0x65
[<ffffffff810ac9da>] warn_slowpath_common+0x8a/0xc0
[<ffffffff810aca65>] warn_slowpath_fmt+0x55/0x70
[<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
[<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
[<ffffffff810dd2ad>] __might_sleep+0xbd/0xd0
[<ffffffff8124c973>] kmem_cache_alloc_trace+0x243/0x430
[<ffffffff810d941e>] ? groups_alloc+0x3e/0x130
[<ffffffff810d941e>] groups_alloc+0x3e/0x130
[<ffffffffa0301b1e>] svcauth_unix_accept+0x16e/0x290 [sunrpc]
[<ffffffffa0300571>] svc_authenticate+0xe1/0xf0 [sunrpc]
[<ffffffffa02fc564>] svc_process_common+0x244/0x6a0 [sunrpc]
[<ffffffffa02fd044>] bc_svc_process+0x1c4/0x260 [sunrpc]
[<ffffffffa03d5478>] nfs41_callback_svc+0x128/0x1f0 [nfsv4]
[<ffffffff810ff970>] ? wait_woken+0xc0/0xc0
[<ffffffffa03d5350>] ? nfs4_callback_svc+0x60/0x60 [nfsv4]
[<ffffffff810d45bf>] kthread+0x11f/0x140
[<ffffffff810ea815>] ? local_clock+0x15/0x30
[<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
[<ffffffff81874bfc>] ret_from_fork+0x7c/0xb0
[<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
---[ end trace 675220a11e30f4f2 ]---
nfs41_callback_svc does most of its work while in TASK_INTERRUPTIBLE,
which is just wrong. Fix that by finishing the wait immediately if we've
found that the list has something on it.
Also, we don't expect this kthread to accept signals, so we should be
using a TASK_UNINTERRUPTIBLE sleep instead. That however, opens us up
hung task warnings from the watchdog, so have the schedule_timeout
wake up every 60s if there's no callback activity.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that we deal correctly with the case where the server sends us a
newer instance of the same delegation. If the stateids match, but the
sequence numbers differ, then treat the new delegation as if it were
an atomic upgrade.
Signed-off-by: Trond Myklebust <Trond.Myklebust@primarydata.com>
Replace the current code with something that is a little closer to what
net/sunrpc/auth_unix.c uses.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Optimise the layout return on close code by ensuring that
1) Add a check for whether we hold a layout before taking any spinlocks
2) Only take the spin lock once
3) Use nfs_state->state to speed up open file checks
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Note, however, that we still serialise on the open stateid if the lock
stateid is unconfirmed. Hopefully that will not prove too much of a
burden for first time locks; it should leave the ability to parallelise
OPENs unchanged, since they no longer call the serialisation primitives.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that we test the lock stateid remained unchanged while we were
updating the VFS tracking of the byte range lock. Have the process
replay the lock to the server if we detect that was not the case.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch ensures that the server cannot reorder our LOCK/LOCKU
requests if they are sent in parallel on the wire.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The original text in RFC3530 was terribly confusing since it conflated
lockowners and lock stateids. RFC3530bis clarifies that you must use
open_to_lock_owner when there is no lock state for that file+lockowner
combination.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we update the lock stateid, we really do need to ensure that this is
done under the state->state_lock, and that we are indeed only updating
confirmed locks with a newer version of the same stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Remove the serialisation of OPEN/OPEN_DOWNGRADE and CLOSE calls for the
case of NFSv4.1 and newer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we relax the sequencing on the NFSv4.1 OPEN/CLOSE code, we will want
to use the value NULL to indicate that no sequencing is needed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If an OPEN RPC call races with a CLOSE or OPEN_DOWNGRADE so that it
updates the nfs_state structure before the CLOSE/OPEN_DOWNGRADE has
a chance to do so, then we know that the state->flags need to be
recalculated from scratch.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we are to remove the serialisation of OPEN/CLOSE, then we need to
ensure that the stateid sent as part of a CLOSE operation does not
change after we test the state in nfs4_close_prepare.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This function call was being optimized out during nfs_fhget(), leading
to situations where we have a valid fileid but still want to use the
mounted_on_fileid. For example, imagine we have our server configured
like this:
server % df
Filesystem Size Used Avail Use% Mounted on
/dev/vda1 9.1G 6.5G 1.9G 78% /
/dev/vdb1 487M 2.3M 456M 1% /exports
/dev/vdc1 487M 2.3M 456M 1% /exports/vol1
/dev/vdd1 487M 2.3M 456M 1% /exports/vol2
If our client mounts /exports and tries to do a "chown -R" across the
entire mountpoint, we will get a nasty message warning us about a circular
directory structure. Running chown with strace tells me that each directory
has the same device and inode number:
newfstatat(AT_FDCWD, "/nfs/", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
newfstatat(4, "vol1", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
newfstatat(4, "vol2", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
With this patch the mounted_on_fileid values are used for st_ino, so the
directory loop warning isn't reported.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We only support swap file calling nfs_direct_IO. However, application
might be able to get to nfs_direct_IO if it toggles O_DIRECT flag
during IO and it can deadlock because we grab inode->i_mutex in
nfs_file_direct_write(). So return 0 for such case. Then the generic
layer will fall back to buffer IO.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
bdi_destroy already does all the work, and if we delay freeing the
anon bdev we can get away with just that single call.
Addintionally remove the call during mount failure, as
deactivate_super_locked will already call ->kill_sb and clean up
the bdi for us.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case. Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Remove an incorrect check for NFS_DELEGATION_NEED_RECLAIM in
can_open_delegated(). We are allowed to cache opens even in
a situation where we're doing reboot recovery.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Detect server trunking across transport protocols. Otherwise, an
RDMA mount and a TCP mount of the same server will end up with
separate nfs_clients using the same clientid4.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
While we normally expect the NFSv4 client to always send the same client
owner to all servers, there are a couple of situations where that is not
the case:
1) In NFSv4.0, switching between use of '-omigration' and not will cause
the kernel to switch between using the non-uniform and uniform client
strings.
2) In NFSv4.1, or NFSv4.0 when using uniform client strings, if the
uniquifier string is suddenly changed.
This patch will catch those situations by checking the client owner id
in the trunking detection code, and will do the right thing if it notices
that the strings differ.
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that we cache the NFSv4/v4.1 client owner_id so that we can
verify it when we're doing trunking detection.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, our trunking code will check for session trunking, but will
fail to detect client id trunking. This is a problem, because it means
that the client will fail to recognise that the two connections represent
shared state, even if they do not permit a shared session.
By removing the check for the server minor id, and only checking the
major id, we will end up doing the right thing in both cases: we close
down the new nfs_client and fall back to using the existing one.
Fixes: 05f4c350ee ("NFS: Discover NFSv4 server trunking when mounting")
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # 3.7.x
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
These patches fixes for iostats and SETCLIENTID in addition to cleaning
up the nfs4_init_callback() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PMdS
-----END PGP SIGNATURE-----
Merge tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next
Pull pull additional NFS client changes for 3.19 from Anna Schumaker:
"NFS: Generic client side changes from Chuck
These patches fixes for iostats and SETCLIENTID in addition to cleaning
up the nfs4_init_callback() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"
* tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
NFS: Clean up nfs4_init_callback()
NFS: SETCLIENTID XDR buffer sizes are incorrect
SUNRPC: serialize iostats updates
This patch adds support for using the NFS v4.2 operation DEALLOCATE to
punch holes in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch adds support for using the NFS v4.2 operation ALLOCATE to
preallocate data in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs4_init_callback() is never invoked for NFS versions other than 4.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use the correct calculation of the maximum size of a clientaddr4
when encoding and decoding SETCLIENTID operations. clientaddr4 is
defined in section 2.2.10 of RFC3530bis-31.
The usage in encode_setclientid_maxsz is missing the 4-byte length
in both strings, but is otherwise correct. decode_setclientid_maxsz
simply asks for a page of receive buffer space, which is
unnecessarily large (more than 4KB).
Note that a SETCLIENTID reply is either clientid+verifier, or
clientaddr4, depending on the returned NFS status. It doesn't
hurt to allocate enough space for both.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Define and use nfs_inc_fscache_stats when plus one, which can save to
pass one parameter.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The nfs_put_client() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs4_layoutget_release() drops layout hdr refcnt. Grab the refcnt
early so that it is safe to call .release in case nfs4_alloc_pages
fails.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Fixes: a47970ff78 ("NFSv4.1: Hold reference to layout hdr in layoutget")
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Recent work in the pgio layer made it possible for there to be more than one
request per page. This caused a subtle change in commit behavior, because
write.c:nfs_commit_unstable_pages compares the number of *pages* waiting for
writeback against the number of requests on a commit list to choose when to
send a COMMIT in a non-blocking flush.
This is probably hard to hit in normal operation - you have to be using
rsize/wsize < PAGE_SIZE, or pnfs with lots of boundaries that are not page
aligned to have a noticeable change in behavior.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use the number of pages in the pagecache mapping instead of the
number of pnfs requests which is only slightly related.
Reported-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This should make the code easier to maintain in the future.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS4ERR_ACCESS has number 13 and thus is matched and returned
immediately at the beginning of nfs4_map_errors() and there's no point
in checking it later.
Coverity-id: 733891
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
