Commit Graph

173471 Commits

Author SHA1 Message Date
Johannes Berg
a6bae9e7ab mac80211: remove useless setting of IEEE80211_TX_INTFL_DONT_ENCRYPT
There's no value in setting a flag that will
never be checked after this point, this seems
to be legacy code -- I think previously the
flag was used to check whether to encrypt the
frame or not. Now, however, the flag need not
be set, and setting it actually interferes if
the frame will be processed again later.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:17 -05:00
Johannes Berg
697e6a0fb0 mac80211: clear TX control on filtered frames
When an skb survived a round-trip through the driver
and needs to be re-used, its control information is
definitely not valid any more, the driver will have
overwritten it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:16 -05:00
Johannes Berg
edc6ccb7b9 mac80211: move and rename misc tx handler
This TX handler is used only for assigning the
station pointer in the control information, so
give it a better name. Also move it before rate
control.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:16 -05:00
Bob Copeland
8e9310c179 mac80211: pid: replace open-coded msecs_to_jiffies
Code directly scaling by HZ and rounding can be more efficiently
and clearly performed with msecs_to_jiffies.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:15 -05:00
Reinette Chatre
1f44780827 iwlwifi: update copyright year to 2010
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:15 -05:00
Wey-Yi Guy
4e9772b0a9 iwlwifi: remove extra statistics request from debugfs
When reading current ucode statistics information from debugfs, in
current implementation, it will always send a new "statistics request" to
uCode. In normal operation, uCode should report the statistics per beacon
interval. Remove this extra request to reduce the additional command exchanges
between driver and uCode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:13 -05:00
Wey-Yi Guy
1b3eb8236a iwlwifi: display flowhandler register when sw error or on-demand
Flowhandler handle the communication between driver and uCode, when any
uCode error happen, we also like to know what is the status of the
flowhandler; it can help to debug flowhandler related problem.

Also adding debugfs file to dump current value of flowhandler registers.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:12 -05:00
Wey-Yi Guy
2a11df6ee5 iwlwifi: software w/a for h/w bug cause Rx bit get clear
This is a w/a for a hardware bug. the h/w bug may cause the Rx bit
(bit 15 before shifting it to 31) to clear when using interrupt coalescing.

This does not mean frames are lost - their processing is just delayed until
next interrupt arrives.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:12 -05:00
Wey-Yi Guy
2be76703a3 iwlwifi: set interrupt coalescing timer range and default
For interrupt coalescing timer, the CSR_INT_COALESCING is an 8 bit
register in 32-usec unit, the range can go from 0x00 - 0xFF. set the
range and default timeout value for both calibration mode and operation mode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:11 -05:00
Wey-Yi Guy
937c397eb6 iwlwifi: correct return code for log_event
When dumping event log in debugfs, iwl_dump_nic_event_log()
should return the correct error code instead of let the calling
function makes it own assumption.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:10 -05:00
Wey-Yi Guy
11fc524941 iwlwifi: add num_of_sos_stats to statistics counter
When uCode detects number of beacon missed consecutively above the
internal missed beacon threshold (set by uCode), it will reset and
re-tune the radio in order to get out of bad PHY state.

This "num_of_sos_states" counter monitors number of time uCode
encounters this bad condition and has to re-tune the radio.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:10 -05:00
Wey-Yi Guy
e3ef216438 iwlwifi: format and show statistics counter from uCode
To help debug uCode related problem, adding "delta" and "max"
information in debugfs statistics counters display.

Those information show the delta between two statistics report from
uCode, user can monitor the counters for any "un-normal" behavior.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Jay Sternberg<jay.e.sternberg@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:09 -05:00
Wey-Yi Guy
9ed333e029 iwlwifi: fix clear statistics counter command
When receive reply statistics command with "clear" mask, just reset the
accumulated statistics counters, but not the current statistics counters,
so the accumulated statistics counter can provide the correct
information.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:08 -05:00
Felix Fietkau
861a57cd01 mac80211: fix WMM AC default for non-QoS data frames
The WMM AC selection added to the monitor mode selection function
accidentally assigns non-QoS data frames to the same AC as mgmt frames
(VO). This is not serious, but should be fixed anyway. This patch
assigns them to the BE AC instead.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:25:07 -05:00
John W. Linville
031cf0e94c Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-01-19 15:58:41 -05:00
Hin-Tak Leung
ad580db50e zd1211rw: adding 0409:0248 to supported device list
Yasuhiro ABE <yadiary@gmail.com> reported success in sourceforge zd1211-dev list.
The device is a NEC Aterm WL54GU usb wireless stick.

The brand and retail product name
    NEC, Aterm PA-WL54GU
The USB ID's (duh)
    ID 0409:0248
The chip ID string
    zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N-
The FCC ID
    unknown

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Yasuhiro ABE <yadiary@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18 15:07:03 -05:00
Christian Lamparter
f5300e04df p54pci: rx frame length check
A long time ago, a user reported several crashes due to
data corruptions which are likely the result of a
not-100%-supported, or faulty? PCI bridge.
( http://patchwork.kernel.org/patch/53004/ )

This patch fixes entry #1.
"1.  p54p_check_rx_ring - skb_over_panic: Under a ping flood
or just left running for a bit would panic with a skb_over_panic."
As described in the mail: The invalid frame length causes
skb_put to bailout and trigger a crash.

Note:
Simply dropping the frame is problematic, because if its content
contains a tx feedback we would lose some portion of the device
memory space.... And the driver/mac80211 should handle all other
invalid data.

Reported-by: Quintin Pitts <geek4linux@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18 15:07:02 -05:00
Bob Copeland
e850f68b8f mac80211: fix sign error in pid controller
While testing the pid rate controller in mac80211_hwsim, I noticed
that once the controller reached 54 Mbit rates, it would fail to
lower the rate when necessary.  The debug log shows:

1945 186786 pf_sample 50 3534 3577 50

My interpretation is that the fixed point scaling of the target
error value (pf) is incorrect: the error value of 50 compared to
a target of 14 case should result in a scaling value of
(14-50) = -36 * 256 or -9216, but instead it is (14 * 256)-50, or
3534.

Correct this by doing fixed point scaling after subtraction.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Stefano Brivio <stefano.brivio@polimi.it>
Acked-by: Mattias Nissler <mattias.nissler@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18 15:07:02 -05:00
Reinette Chatre
bb5d2db570 iwlwifi: add license to tracing files
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18 15:07:01 -05:00
Wey-Yi Guy
1152dcc28c iwlwifi: Fix throughput stall issue in HT mode for 5000
Similar to 6000 and 1000 series, RTS/CTS is the recommended protection
mechanism for 5000 series in HT mode based on the HW design.

Using RTS/CTS will better protect the inner exchange from interference,
especially in highly-congested environment, it also prevent uCode encounter
TX FIFO underrun and other HT mode related performance issues.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18 15:07:00 -05:00
Rafał Miłecki
730dd70549 b43: N-PHY: drop unused definition, uncomment needed call
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:44 -05:00
Rafał Miłecki
6dcd9d911c b43: N-PHY: implement TX power control coef setup
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:43 -05:00
Rafał Miłecki
15931e318b b43: N-PHY: add RX IQ calibrationi for rev < 3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:43 -05:00
Rafał Miłecki
fb43b8e235 b43: N-PHY: add huge calculating TX IQ LO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
e9762492f5 b43: N-PHY: implement calculating IQ gain params
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
de7ed0c624 b43: N-PHY: update TX calibration ladder
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
c4a92003b0 b43: N-PHY: add RX radio cores calibration
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:41 -05:00
Rafał Miłecki
fe3e46e881 b43: N-PHY: add TX LP FBW (TX filter 40 related)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
b0022e15cc b43: N-PHY: implement getting TX gains
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
34a56f2cae b43: N-PHY: implement calculating RX IQ comp
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
2faa6b832f b43: N-PHY: implement RX IQ estimation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:39 -05:00
Rafał Miłecki
2f258b74d1 b43: N-PHY: implement restoring general configuration
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:39 -05:00
Rafał Miłecki
0914640072 b43: N-PHY: implement workaround for TX IQ
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:38 -05:00
Rafał Miłecki
a67162ab00 b43: N-PHY: implement RX IQ coeffs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:38 -05:00
Rafał Miłecki
5c1a140afb b43: N-PHY: add function than forces (not) staying in carrier search
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:37 -05:00
Rafał Miłecki
42e1547e51 b43: N-PHY: add RSSI calibration restore
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>`
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:37 -05:00
Rafał Miłecki
e50cbcf674 b43: N-PHY: implement PA overriding (RF control related)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:36 -05:00
Rafał Miłecki
90b9738d85 b43: N-PHY: RSSI calibration for rev < 3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:36 -05:00
Rafał Miłecki
dfb4aa5dd0 b43: N-PHY: add RSSI polling and setting 2055 (radio) VCM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:35 -05:00
Rafał Miłecki
3c95627d40 b43: N-PHY: implement RSSI selection and offset scaling
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:35 -05:00
Rafał Miłecki
bbec398c1b b43: N-PHY: add clip detection reading/writing and some classifier function
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:34 -05:00
Rafał Miłecki
4cb9977516 b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:34 -05:00
Rafał Miłecki
4a933c8566 b43: N-PHY: update CCA reset
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:33 -05:00
Rafał Miłecki
0988a7a1a9 b43: N-PHY: update init code to match current specs
Previous init path was based on old specs from old driver. Update it
as much as possible leaving some TODOs for not implemented functions.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:33 -05:00
Rafał Miłecki
088e56b44a b43: N-PHY: add various tables
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:32 -05:00
Rafał Miłecki
2a448bfc70 b43: N-PHY: add global variables to b43_phy_n struct
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:32 -05:00
Rafał Miłecki
5b0ade3377 b43: N-PHY: add missing register definitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:30 -05:00
Rafał Miłecki
f8187b5b97 b43: N-PHY: add needed struct definitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:30 -05:00
Rafał Miłecki
76a4db303d b43: N-PHY: add shared memory offsets definitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:29 -05:00
Rafał Miłecki
4772ae107c b43: N-PHY: clean table init, check PHY rev
Move table init to tables_nphy.c, detect newer PHY which use different init.
We don't init newer PHYs yet but this at least shows what more is needed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:29 -05:00