Use the ocfs2_xattr_bucket abstraction in
ocfs2_xattr_create_index_block() and its helpers. We get more efficient
reads, a lot less buffer_head munging, and nicer code to boot. While
we're at it, ocfs2_xattr_update_xattr_search() becomes void.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Change the ocfs2_xattr_bucket_find() function to use ocfs2_xattr_bucket
as its abstraction. This makes for more efficient reads, as buckets are
linear blocks, and also has improved caching characteristics. It also
reads better.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_xattr_bucket structure is a nice abstraction, but it is a bit
large to have on the stack. Just like ocfs2_path, let's allocate it
with a ocfs2_xattr_bucket_new() function.
We can now store the inode on the bucket, cleaning up all the other
bucket functions. While we're here, we catch another place or two that
wasn't using ocfs2_read_xattr_bucket().
Updates:
- No longer allocating xis.bucket, as it will never be used.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that the places that copy whole buckets are using struct
ocfs2_xattr_bucket, we can do the copy in a dedicated function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
A common action is to call ocfs2_journal_access() and
ocfs2_journal_dirty() on the buffer heads of an xattr bucket. Let's
create nice wrappers.
While we're there, let's drop the places that try to be smart by writing
only the first and last blocks of a bucket. A bucket is contiguous, so
writing the whole thing is actually more efficient.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_read_xattr_bucket() function would read an xattr bucket into a
list of buffer heads. However, we have a nice ocfs2_xattr_bucket
structure. Let's have it fill that out instead.
In addition, ocfs2_read_xattr_bucket() would initialize buffer heads for
a bucket that's never been on disk before. That's confusing. Let's
call that functionality ocfs2_init_xattr_bucket().
The functions ocfs2_cp_xattr_bucket() and ocfs2_half_xattr_bucket() are
updated to use the ocfs2_xattr_bucket structure rather than raw bh
lists. That way they can use the new read/init calls. In addition,
they drop the wasted read of an existing target bucket.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
A common theme is walking all the buffer heads on an ocfs2_xattr_bucket
and releasing them. Let's wrap that.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The xattr code often wants to access the ocfs2_xattr_header at the start
of an bucket. Rather than walk the pointer chains, let's just create
another nice macro. As a side benefit, we can get rid of the mostly
spurious ->bu_xh element on the bucket structure. The idea is ripped
from the ocfs2_path code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The xattr code often wants to access the data pointer for blocks in an
xattr bucket. This is usually found by dereferencing the bh array
hanging off of the ocfs2_xattr_bucket structure. Rather than do this
all the time, let's provide a nice little macro. The idea is ripped
from the ocfs2_path code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The xattr code often wants to know the block number of an xattr bucket.
This is usually found by dereferencing the first bh hanging off of the
ocfs2_xattr_bucket structure. Rather than do this all the time, let's
provide a nice little macro. The idea is ripped from the ocfs2_path
code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_xattr_bucket structure keeps track of the buffers for one
xattr bucket. Let's prefix the fields for easier code navigation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
Define the OCFS2_FEATURE_COMPAT_JBD2 bit in the filesystem header.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we create xattr bucket during the process of xattr set, we always
need to update the ocfs2_xattr_search since even if the bucket size is
the same as block size, the offset will change because of the removal
of the ocfs2_xattr_block header.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
We're panicing in ocfs2_read_blocks_sync() if a jbd-managed buffer is seen.
At first glance, this seems ok but in reality it can happen. My test case
was to just run 'exorcist'. A struct inode is being pushed out of memory but
is then re-read at a later time, before the buffer has been checkpointed by
jbd. This causes a BUG to be hit in ocfs2_read_blocks_sync().
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In init_dlmfs_fs(), if calling kmem_cache_create() failed, the code will use return value from
calling bdi_init(). The correct behavior should be set status as -ENOMEM before going to "bail:".
Signed-off-by: Coly Li <coyli@suse.de>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_unlock_ast(), call wake_up() on lockres before releasing
the spin lock on it. As soon as the spin lock is released, the
lockres can be freed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The locking_state dump, ocfs2_dlm_seq_show, reads the lvb on locks where it
has not yet been initialized by a lock call.
Signed-off-by: David Teigland <teigland@redhat.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: James Morris <jmorris@namei.org>
ocfs2_xattr_block_get() calls ocfs2_xattr_search() to find an external
xattr, but doesn't check the search result that is passed back via struct
ocfs2_xattr_search. Add a check for search result, and pass back -ENODATA if
the xattr search failed. This avoids a later NULL pointer error.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2/xattr, we must make sure the xattrs which have the same hash value
exist in the same bucket so that the search schema can work. But in the old
implementation, when we want to extend a bucket, we just move half number of
xattrs to the new bucket. This works in most cases, but if we are lucky
enough we will move 2 xattrs into 2 different buckets. This means that an
xattr from the previous bucket cannot be found anymore. This patch fix this
problem by finding the right position during extending the bucket and extend
an empty bucket if needed.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping
isn't updated, and it will cause the user space program get SIGBUS and
exit. The reason is that during race writeable mmap, we will do
unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is
that if we reuturn 0 in page_mkwrite, VFS will retry fault and then
call page_mkwrite again, so it is safe to return 0 here.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch sets journal descriptor to NULL after the journal is shutdown.
This ensures that jbd2_journal_release_jbd_inode(), which removes the
jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode()
even after the journal has been shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM),
so we should check whether handle is NULL. Fix them to use IS_ERR().
Jan has made the patch for other part in ocfs2(thank Jan for it), so
this is just the fix for fs/ocfs2/xattr.c.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We forgot to set i_nlink to 0 when returning due to error from ocfs2_mknod_locked()
and thus inode was not properly released via ocfs2_delete_inode() (e.g. claimed
space was not released). Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
new_inode() does not return ERR_PTR() but NULL in case of failure. Correct
checking of the return value.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM).
Thus checks for !handle are wrong. Fix them to use IS_ERR().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Fix some typos in the xattr annotations.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Since now ocfs2 supports empty xattr buckets, we will never remove
the xattr index tree even if all the xattrs are removed, so this
function will never be called. So remove it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_xattr_block_get() looks up the xattr in a startlingly familiar
way; it's identical to the function ocfs2_xattr_block_find(). Let's just
use the later in the former.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
There are a couple places that get an xattr bucket that may be reading
an existing one or may be allocating a new one. They should specify the
correct journal access mode depending.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_xattr_update_xattr_search() function can return an error when
trying to read blocks off of disk. The caller needs to check this error
before using those (possibly invalid) blocks.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
If the xattr disk structures are corrupt, return -EIO, not -EFAULT.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The xattr.c code is currently memcmp()ing naking buffer pointers.
Create the OCFS2_IS_VALID_XATTR_BLOCK() macro to match its peers and use
that.
In addition, failed signature checks were returning -EFAULT, which is
completely wrong. Return -EIO.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Make the handler_map array as large as the possible value range to avoid
a fencepost error.
[ Utilize alternate method -- Joel ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Include/linux/xattr.h already has the definition about xattr prefix,
so remove the duplicate definitions in xattr.c.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Because we merged the xattr sources into one file, some functions
no longer belong in the header file.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes the license in xattr.c and xattr.h.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing uses prepare_write or commit_write. Remove them from the tree
completely.
[akpm@linux-foundation.org: schedule simple_prepare_write() for unexporting]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
[PATCH] kill the rest of struct file propagation in block ioctls
[PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
[PATCH] get rid of blkdev_locked_ioctl()
[PATCH] get rid of blkdev_driver_ioctl()
[PATCH] sanitize blkdev_get() and friends
[PATCH] remember mode of reiserfs journal
[PATCH] propagate mode through swsusp_close()
[PATCH] propagate mode through open_bdev_excl/close_bdev_excl
[PATCH] pass fmode_t to blkdev_put()
[PATCH] kill the unused bsize on the send side of /dev/loop
[PATCH] trim file propagation in block/compat_ioctl.c
[PATCH] end of methods switch: remove the old ones
[PATCH] switch sr
[PATCH] switch sd
[PATCH] switch ide-scsi
[PATCH] switch tape_block
[PATCH] switch dcssblk
[PATCH] switch dasd
[PATCH] switch mtd_blkdevs
[PATCH] switch mmc
...
* get rid of fake struct file/struct dentry in __blkdev_get()
* merge __blkdev_get() and do_open()
* get rid of flags argument of blkdev_get()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ocfs2_read_blocks() currently requires the CACHED flag for cached I/O.
However, that's the common case. Let's flip it around and provide an
IGNORE_CACHE flag for the special users. This has the added benefit of
cleaning up the code some (ignore_cache takes on its special meaning
earlier in the loop).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2's cached buffer I/O goes through ocfs2_read_block(s)(). dir.c had
a naked wait_on_buffer() to wait for some readahead, but it should
use ocfs2_read_block() instead.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
dir.c is the only place using ocfs2_bread(), so let's make it static to
that file.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED.
Only six pass a different flag set. Rather than have every caller care,
let's make ocfs2_read_block() take no flags and always do a cached read.
The remaining six places can call ocfs2_read_blocks() directly.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that synchronous readers are using ocfs2_read_blocks_sync(), all
callers of ocfs2_read_blocks() are passing an inode. Use it
unconditionally. Since it's there, we don't need to pass the
ocfs2_super either.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_read_blocks() function currently handles sync reads, cached,
reads, and sometimes cached reads. We're going to add some
functionality to it, so first we should simplify it. The uncached,
synchronous reads are much easer to handle as a separate function, so we
instroduce ocfs2_read_blocks_sync().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
According to Christoph Hellwig's advice, we really don't need
a ->list to handle one xattr's list. Just a map from index to
xattr prefix is enough. And I also refactor the old list method
with the reference from fs/xfs/linux-2.6/xfs_xattr.c and the
xattr list method in btrfs.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
According to Christoph Hellwig's advice, the hash value of EA
is only calculated by its suffix.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Per Christoph Hellwig's suggestion - don't split these up. It's not like we
gained much by having the two tiny files around.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
i and b_len don't really need to be u64's. Xattr extent lengths should be
limited by the VFS, and then the size of our on-disk length field.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
As Mark mentioned, it may be time-consuming when we remove the
empty xattr bucket, so this patch try to let empty bucket exist
in xattr operation. The modification includes:
1. Remove the functin of bucket and extent record deletion during
xattr delete.
2. In xattr set:
1) Don't clean the last entry so that if the bucket is empty,
the hash value of the bucket is the hash value of the entry
which is deleted last.
2) During insert, if we meet with an empty bucket, just use the
1st entry.
3. In binary search of xattr bucket, use the bucket hash value(which
stored in the 1st xattr entry) to find the right place.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
During the process of xatt insertion, we use binary search
to find the right place and "low" is set to it. But when
there is one xattr which has the same name hash as the inserted
one, low is the wrong value. So set it to the right position.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch adds check for [no]user_xattr in ocfs2_show_options() that completes
the list of all mount options.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2 wants JBD2 for many reasons, not the least of which is that JBD is
limiting our maximum filesystem size.
It's a pretty trivial change. Most functions are just renamed. The
only functional change is moving to Jan's inode-based ordered data mode.
It's better, too.
Because JBD2 reads and writes JBD journals, this is compatible with any
existing filesystem. It can even interact with JBD-based ocfs2 as long
as the journal is formated for JBD.
We provide a compatibility option so that paranoid people can still use
JBD for the time being. This will go away shortly.
[ Moved call of ocfs2_begin_ordered_truncate() from ocfs2_delete_inode() to
ocfs2_truncate_for_delete(). --Mark ]
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that ocfs2 limits inode numbers to 32bits, add a mount option to
disable the limit. This parallels XFS. 64bit systems can handle the
larger inode numbers.
[ Added description of inode64 mount option in ocfs2.txt. --Mark ]
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2 inode numbers are block numbers. For any filesystem with less
than 2^32 blocks, this is not a problem. However, when ocfs2 starts
using JDB2, it will be able to support filesystems with more than 2^32
blocks. This would result in inode numbers higher than 2^32.
The problem is that stat(2) can't handle those numbers on 32bit
machines. The simple solution is to have ocfs2 allocate all inodes
below that boundary.
The suballoc code is changed to honor an optional block limit. Only the
inode suballocator sets that limit - all other allocations stay unlimited.
The biggest trick is to grow the inode suballocator beneath that limit.
There's no point in allocating block groups that are above the limit,
then rejecting their elements later on. We want to prevent the inode
allocator from ever having block groups above the limit. This involves
a little gyration with the local alloc code. If the local alloc window
is above the limit, it signals the caller to try the global bitmap but
does not disable the local alloc file (which can be used for other
allocations).
[ Minor cleanup - removed an ML_NOTICE comment. --Mark ]
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_xattr_free_block, we take a cluster lock on xb_alloc_inode while we
have a transaction open. This will deadlock the downconvert thread, so fix
it.
We can clean up how xattr blocks are removed while here - this patch also
moves the mechanism of releasing xattr block (including both value, xattr
tree and xattr block) into this function.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_extend_trans, when we can't extend the current
transaction, it will commit current transaction and restart
a new one. So if the previous credits we have allocated aren't
used(the block isn't dirtied before our extend), we will not
have enough credits for any future operation(it will cause jbd
complain and bug out). So check this and re-extend it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The original get/put_extent_tree() functions held a reference on
et_root_bh. However, every single caller already has a safe reference,
making the get/put cycle irrelevant.
We change ocfs2_get_*_extent_tree() to ocfs2_init_*_extent_tree(). It
no longer gets a reference on et_root_bh. ocfs2_put_extent_tree() is
removed. Callers now have a simpler init+use pattern.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
struct ocfs2_extent_tree_operations provides methods for the different
on-disk btrees in ocfs2. Describing what those methods do is probably a
good idea.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We now have three different kinds of extent trees in ocfs2: inode data
(dinode), extended attributes (xattr_tree), and extended attribute
values (xattr_value). There is a nice abstraction for them,
ocfs2_extent_tree, but it is hidden in alloc.c. All the calling
functions have to pick amongst a varied API and pass in type bits and
often extraneous pointers.
A better way is to make ocfs2_extent_tree a first-class object.
Everyone converts their object to an ocfs2_extent_tree() via the
ocfs2_get_*_extent_tree() calls, then uses the ocfs2_extent_tree for all
tree calls to alloc.c.
This simplifies a lot of callers, making for readability. It also
provides an easy way to add additional extent tree types, as they only
need to be defined in alloc.c with a ocfs2_get_<new>_extent_tree()
function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
A couple places check an extent_tree for a valid inode. We move that
out to add an eo_insert_check() operation. It can be called from
ocfs2_insert_extent() and elsewhere.
We also have the wrapper calls ocfs2_et_insert_check() and
ocfs2_et_sanity_check() ignore NULL ops. That way we don't have to
provide useless operations for xattr types.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
A caller knows what kind of extent tree they have. There's no reason
they have to call ocfs2_get_extent_tree() with a NULL when they could
just as easily call a specific function to their type of extent tree.
Introduce ocfs2_dinode_get_extent_tree(),
ocfs2_xattr_tree_get_extent_tree(), and
ocfs2_xattr_value_get_extent_tree(). They only take the necessary
arguments, calling into the underlying __ocfs2_get_extent_tree() to do
the real work.
__ocfs2_get_extent_tree() is the old ocfs2_get_extent_tree(), but
without needing any switch-by-type logic.
ocfs2_get_extent_tree() is now a wrapper around the specific calls. It
exists because a couple alloc.c functions can take et_type. This will
go later.
Another benefit is that ocfs2_xattr_value_get_extent_tree() can take a
struct ocfs2_xattr_value_root* instead of void*. This gives us
typechecking where we didn't have it before.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Provide an optional extent_tree_operation to specify the
max_leaf_clusters of an ocfs2_extent_tree. If not provided, the value
is 0 (unlimited).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_num_free_extents() re-implements the logic of
ocfs2_get_extent_tree(). Now that ocfs2_get_extent_tree() does not
allocate, let's use it in ocfs2_num_free_extents() to simplify the code.
The inode validation code in ocfs2_num_free_extents() is not needed.
All callers are passing in pre-validated inodes.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The root_el of an ocfs2_extent_tree needs to be calculated from
et->et_object. Make it an operation on et->et_ops.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The 'private' pointer was a way to store off xattr values, which don't
live at a set place in the bh. But the concept of "the object
containing the extent tree" is much more generic. For an inode it's the
struct ocfs2_dinode, for an xattr value its the value. Let's save off
the 'object' at all times. If NULL is passed to
ocfs2_get_extent_tree(), 'object' is set to bh->b_data;
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Rather than allocating a struct ocfs2_extent_tree, just put it on the
stack. Fill it with ocfs2_get_extent_tree() and drop it with
ocfs2_put_extent_tree(). Now the callers don't have to ENOMEM, yet
still safely ref the root_bh.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The members of the ocfs2_extent_tree structure gain a prefix of 'et_'.
All users are updated.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_extent_tree_operations structure gains a field prefix on its
members. The ->eo_sanity_check() operation gains a wrapper function for
completeness. All of the extent tree operation wrappers gain a
consistent name (ocfs2_et_*()).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes the following build warnings:
fs/ocfs2/xattr.c: In function 'ocfs2_half_xattr_bucket':
fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 7 has type 'long int'
fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 8 has type 'long int'
fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 7 has type 'long int'
fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 8 has type 'long int'
fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 7 has type 'long int'
fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 8 has type 'long int'
fs/ocfs2/xattr.c: In function 'ocfs2_xattr_set_entry_in_bucket':
fs/ocfs2/xattr.c:4092: warning: format '%d' expects type 'int', but argument 6 has type 'size_t'
fs/ocfs2/xattr.c:4092: warning: format '%d' expects type 'int', but argument 6 has type 'size_t'
fs/ocfs2/xattr.c:4092: warning: format '%d' expects type 'int', but argument 6 has type 'size_t'
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds the s_incompat flag for extended attribute support. This
helps us ensure that older versions of Ocfs2 or ocfs2-tools will not be able
to mount a volume with xattr support.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In inode removal, we need to iterate all the buckets, remove any
externally-stored EA values and delete the xattr buckets.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Where the previous patches added the ability of list/get xattr in buckets
for ocfs2, this patch enables ocfs2 to store large numbers of EAs.
The original design doc is written by Mark Fasheh, and it can be found in
http://oss.oracle.com/osswiki/OCFS2/DesignDocs/IndexedEATrees. I only had to
make small modifications to it.
First, because the bucket size is 4K, a new field named xh_free_start is added
in ocfs2_xattr_header to indicate the next valid name/value offset in a bucket.
It is used when we store new EA name/value. With this field, we can find the
place more quickly and what's more, we don't need to sort the name/value every
time to let the last entry indicate the next unused space. This makes the
insert operation more efficient for blocksizes smaller than 4k.
Because of the new xh_free_start, another field named as xh_name_value_len is
also added in ocfs2_xattr_header. It records the total length of all the
name/values in the bucket. We need this so that we can check it and defragment
the bucket if there is not enough contiguous free space.
An xattr insertion looks like this:
1. xattr_index_block_find: find the right bucket by the name_hash, say bucketA.
2. check whether there is enough space in bucketA. If yes, insert it directly
and modify xh_free_start and xh_name_value_len accordingly. If not, check
xh_name_value_len to see whether we can store this by defragment the bucket.
If yes, defragment it and go on insertion.
3. If defragement doesn't work, check whether there is new empty bucket in
the clusters within this extent record. If yes, init the new bucket and move
all the buckets after bucketA one by one to the next bucket. Move half of the
entries in bucketA to the next bucket and go on insertion.
4. If there is no new bucket, grow the extent tree.
As for xattr deletion, we will delete an xattr bucket when all it's xattrs
are removed and move all the buckets after it to the previous one. When all
the xattr buckets in an extend record are freed, free this extend records
from ocfs2_xattr_tree.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In xattr bucket, we want to limit the maximum size of a btree leaf,
otherwise we'll lose the benefits of hashing because we'll have to search
large leaves.
So add a new field in ocfs2_extent_tree which indicates the maximum leaf cluster
size we want so that we can prevent ocfs2_insert_extent() from merging the leaf
record even if it is contiguous with an adjacent record.
Other btree types are not affected by this change.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add code to lookup a given extended attribute in the xattr btree. Lookup
follows this general scheme:
1. Use ocfs2_xattr_get_rec to find the xattr extent record
2. Find the xattr bucket within the extent which may contain this xattr
3. Iterate the bucket to find the xattr. In ocfs2_xattr_block_get(), we need
to recalcuate the block offset and name offset for the right position of
name/value.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Ocfs2 breaks up xattr index tree leaves into 4k regions, called buckets.
Attributes are stored within a given bucket, depending on hash value.
After a discussion with Mark, we decided that the per-bucket index
(xe_entry[]) would only exist in the 1st block of a bucket. Likewise,
name/value pairs will not straddle more than one block. This allows the
majority of operations to work directly on the buffer heads in a leaf block.
This patch adds code to iterate the buckets in an EA. A new abstration of
ocfs2_xattr_bucket is added. It records the bhs in this bucket and
ocfs2_xattr_header. This keeps the code neat, improving readibility.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When necessary, an ocfs2_xattr_block will embed an ocfs2_extent_list to
store large numbers of EAs. This patch adds a new type in
ocfs2_extent_tree_type and adds the implementation so that we can re-use the
b-tree code to handle the storage of many EAs.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch implements storing extended attributes both in inode or a single
external block. We only store EA's in-inode when blocksize > 512 or that
inode block has free space for it. When an EA's value is larger than 80
bytes, we will store the value via b-tree outside inode or block.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add the structures and helper functions we want for handling inline extended
attributes. We also update the inline-data handlers so that they properly
function in the event that we have both inline data and inline attributes
sharing an inode block.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add some thin wrappers around ocfs2_insert_extent() for each of the 3
different btree types, ocfs2_inode_insert_extent(),
ocfs2_xattr_value_insert_extent() and ocfs2_xattr_tree_insert_extent(). The
last is for the xattr index btree, which will be used in a followup patch.
All the old callers in file.c etc will call ocfs2_dinode_insert_extent(),
while the other two handle the xattr issue. And the init of extent tree are
handled by these functions.
When storing xattr value which is too large, we will allocate some clusters
for it and here ocfs2_extent_list and ocfs2_extent_rec will also be used. In
order to re-use the b-tree operation code, a new parameter named "private"
is added into ocfs2_extent_tree and it is used to indicate the root of
ocfs2_exent_list. The reason is that we can't deduce the root from the
buffer_head now. It may be in an inode, an ocfs2_xattr_block or even worse,
in any place in an ocfs2_xattr_bucket.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The old uptodate only handles the issue of removing one buffer_head from
ocfs2 inode's buffer cache. With xattr clusters, we may need to remove
multiple buffer_head's at a time.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Ocfs2 uses a very flexible structure for storing extended attributes on
disk. Small amount of attributes are stored directly in the inode block - up
to 256 bytes worth. If that fills up, attributes are also stored in an
external block, linked to from the inode block. That block can in turn
expand to a btree, capable of storing large numbers of attributes.
Individual attribute values are stored inline if they're small enough
(currently about 80 bytes, this can be changed though), and otherwise are
expanded to a btree. The theoretical limit to the size of an individual
attribute is about the same as an inode, though the kernel's upper bound on
the size of an attributes data is far smaller.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Factor out the non-inode specifics of ocfs2_do_extend_allocation() into a more generic
function, ocfs2_do_cluster_allocation(). ocfs2_do_extend_allocation calls
ocfs2_do_cluster_allocation() now, but the latter can be used for other
btree types as well.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In the old extent tree operation, we take the hypothesis that we
are using the ocfs2_extent_list in ocfs2_dinode as the tree root.
As xattr will also use ocfs2_extent_list to store large value
for a xattr entry, we refactor the tree operation so that xattr
can use it directly.
The refactoring includes 4 steps:
1. Abstract set/get of last_eb_blk and update_clusters since they may
be stored in different location for dinode and xattr.
2. Add a new structure named ocfs2_extent_tree to indicate the
extent tree the operation will work on.
3. Remove all the use of fe_bh and di, use root_bh and root_el in
extent tree instead. So now all the fe_bh is replaced with
et->root_bh, el with root_el accordingly.
4. Make ocfs2_lock_allocators generic. Now it is limited to be only used
in file extend allocation. But the whole function is useful when we want
to store large EAs.
Note: This patch doesn't touch ocfs2_commit_truncate() since it is not used
for anything other than truncate inode data btrees.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_extend_meta_needed(), ocfs2_calc_extend_credits() and
ocfs2_reserve_new_metadata() are all useful for extent tree operations. But
they are all limited to an inode btree because they use a struct
ocfs2_dinode parameter. Change their parameter to struct ocfs2_extent_list
(the part of an ocfs2_dinode they actually use) so that the xattr btree code
can use these functions.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_num_free_extents() is used to find the number of free extent records
in an inode btree. Hence, it takes an "ocfs2_dinode" parameter. We want to
use this for extended attribute trees in the future, so genericize the
interface the take a buffer head. A future patch will allow that buffer_head
to contain any structure rooting an ocfs2 btree.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
A per-mount debugfs file, "local_alloc" is created which when read will
expose live state of the nodes local alloc file. Performance impact is
minimal, only a bit of memory overhead per mount point. Still, the code is
hidden behind CONFIG_OCFS2_FS_STATS. This feature will help us debug
local alloc performance problems on a live system.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Ocfs2's local allocator disables itself for the duration of a mount point
when it has trouble allocating a large enough area from the primary bitmap.
That can cause performance problems, especially for disks which were only
temporarily full or fragmented. This patch allows for the allocator to
shrink it's window first, before being disabled. Later, it can also be
re-enabled so that any performance drop is minimized.
To do this, we allow the value of osb->local_alloc_bits to be shrunk when
needed. The default value is recorded in a mostly read-only variable so that
we can re-initialize when required.
Locking had to be updated so that we could protect changes to
local_alloc_bits. Mostly this involves protecting various local alloc values
with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which
is used when the local allocator is has shrunk, but is not disabled. If the
available space dips below 1 megabyte, the local alloc file is disabled. In
either case, local alloc is re-enabled 30 seconds after the event, or when
an appropriate amount of bits is seen in the primary bitmap.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Do this instead of tracking absolute local alloc size. This avoids
needless re-calculatiion of bits from bytes in localalloc.c. Additionally,
the value is now in a more natural unit for internal file system bitmap
work.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This is actually pretty easy since fs/dlm already handles the bulk of the
work. The Ocfs2 userspace cluster stack module already uses fs/dlm as the
underlying lock manager, so I only had to add the right calls.
Cluster-aware POSIX locks ("plocks") can be turned off by the same means at
UNIX locks - mount with 'noflocks', or create a local-only Ocfs2 volume.
Internally, the file system uses two sets of file_operations, depending on
whether cluster aware plocks is required. This turns out to be easier than
implementing local-only versions of ->lock.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Plug ocfs2 into ->fiemap. Some portions of ocfs2_get_clusters() had to be
refactored so that the extent cache can be skipped in favor of going
directly to the on-disk records. This makes it easier for us to determine
which extent is the last one in the btree. Also, I'm not sure we want to be
caching fiemap lookups anyway as they're not directly related to data
read/write.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: ocfs2-devel@oss.oracle.com
Cc: linux-fsdevel@vger.kernel.org
ocfs2 will become read-only if we try to read the bytes which pass
the end of i_size. This can be easily reproduced by following steps:
1. mkfs a ocfs2 volume with bs=4k cs=4k and nosparse.
2. create a small file(say less than 100 bytes) and we will create the file
which is allocated 1 cluster.
3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit.
4. The ocfs2 volume becomes read-only and dmesg shows:
OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks:
Inode 66010 has a hole at block 1
File system is now read-only due to the potential of on-disk corruption.
Please run fsck.ocfs2 once the file system is unmounted.
So suppress the ERROR message.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_stack_driver_request() function failed to increment the
refcount of an already-active stack. It only did the increment on the
first reference. Whoops.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Marcos Matsunaga <marcos.matsunaga@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We were setting i_blocks based on allocation before the extent insert, which
is wrong as the value is a calculation based on ip_clusters which gets
updated as a result of the insert. This patch moves the line in question
to just after the call to ocfs2_insert_extent().
Without this fix, inline directories were temporarily having an i_blocks
value of zero immediately after expansion to extents.
Reported-and-tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we fail to insert extent in ocfs2_expand_inline_dir(), we should go to
out_commit, not out.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This fixes a bug introduced with 539d826409:
[PATCH 2/2] ocfs2: Fix race between mount and recovery
ocfs2_mark_dead_nodes() was reading journal inodes while holding the
spinlock protecting our in-memory recovery state. The fix is very simple -
the disk state is protected by a cluster lock that's already held, so we
just move the spinlock down past the read.
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2/cluster/netdebug.c: fix warning
fs/ocfs2/cluster/netdebug.c:154: warning: format '%lu' expects
type 'long unsigned int', but argument 17 has type 'suseconds_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Commit 0f475b2abe (ocfs2/net: Silence build
warnings) made sense as far as it fixed compile warnings, but it was not
required that it made the functions global.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.
The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression l;
@@
mutex_lock(l);
... when != mutex_unlock(l)
when any
when strict
(
if (...) { ... when != mutex_unlock(l)
+ mutex_unlock(l);
return ...;
}
|
mutex_unlock(l);
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes an oops that is reproduced when one races writes to a mmap-ed
region with another process truncating the file.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
As the fs recovery is asynchronous, there is a small chance that another
node can mount (and thus recover) the slot before the recovery thread
gets to it.
If this happens, the recovery thread will block indefinitely on the
journal/slot lock as that lock will be held for the duration of the mount
(by design) by the node assigned to that slot.
The solution implemented is to keep track of the journal replays using
a recovery generation in the journal inode, which will be incremented by the
thread replaying that journal. The recovery thread, before attempting the
blocking lock on the journal/slot lock, will compare the generation on disk
with what it has cached and skip recovery if it does not match.
This bug appears to have been inadvertently introduced during the mount/umount
vote removal by mainline commit 34d024f843. In the
mount voting scheme, the messaging would indirectly indicate that the slot
was being recovered.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch renames the ij_pad to ij_recovery_generation in struct ocfs2_dinode.
This will be used to keep count of journal replays after an unclean shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The configfs operations ->make_item() and ->make_group() currently
return a new item/group. A return of NULL signifies an error. Because
of this, -ENOMEM is the only return code bubbled up the stack.
Multiple folks have requested the ability to return specific error codes
when these operations fail. This patch adds that ability by changing the
->make_item/group() ops to return ERR_PTR() values. These errors are
bubbled up appropriately. NULL returns are changed to -ENOMEM for
compatibility.
Also updated are the in-kernel users of configfs.
This is a rework of reverted commit 11c3b79218.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: fix oops in mmap_truncate testing
configfs: call drop_link() to cleanup after create_link() failure
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
configfs: Fix failing mkdir() making racing rmdir() fail
configfs: Fix deadlock with racing rmdir() and rename()
configfs: Make configfs_new_dirent() return error code instead of NULL
configfs: Protect configfs_dirent s_links list mutations
configfs: Introduce configfs_dirent_lock
ocfs2: Don't snprintf() without a format.
ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
ocfs2/net: Silence build warnings on sparc64
ocfs2: Handle error during journal load
ocfs2: Silence an error message in ocfs2_file_aio_read()
ocfs2: use simple_read_from_buffer()
ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
[PATCH 2/2] ocfs2: Instrument fs cluster locks
[PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
This patch fixes a mmap_truncate bug which was found by ocfs2 test suite.
In an ocfs2 cluster more than 1 node, run program mmap_truncate, which races
mmap writes and truncates from multiple processes. While the test is
running, a stat from another node forces writeout, causing an oops in
ocfs2_get_block() because it sees a buffer to write which isn't allocated.
This patch fixed the bug by clear dirty and uptodate bits in buffer, leave
the buffer unmapped and return.
Fix is suggested by Mark Fasheh, and I code up the patch.
Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The configfs operations ->make_item() and ->make_group() currently
return a new item/group. A return of NULL signifies an error. Because
of this, -ENOMEM is the only return code bubbled up the stack.
Multiple folks have requested the ability to return specific error codes
when these operations fail. This patch adds that ability by changing the
->make_item/group() ops to return an int.
Also updated are the in-kernel users of configfs.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Some system files are per-slot. Their names include the slot number.
ocfs2_sprintf_system_inode_name() uses the system inode definitions to
fill in the slot number with snprintf().
For global system files, there is no node number, and the name was
printed as a format with no arguments. -Wformat-nonliteral and
-Wformat-security don't like this. Instead, use a static "%s" format
and the name as the argument.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
A couple places use OCFS2_DEBUG_FS where they really mean
CONFIG_OCFS2_DEBUG_FS.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
suseconds_t is type long on most arches except sparc64 where it is type int.
This patch silences the following warnings that are generated when building
on it.
netdebug.c: In function 'nst_seq_show':
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 13 has type 'suseconds_t'
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 15 has type 'suseconds_t'
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 17 has type 'suseconds_t'
netdebug.c: In function 'sc_seq_show':
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 19 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 21 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 23 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 25 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 27 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 29 has type 'suseconds_t'
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch ensures the mount fails if the fs is unable to load the journal.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences an EINVAL error message in ocfs2_file_aio_read()
that is always due to a user error.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Fix printk format warnings when OCFS2_FS_STATS=n:
linux-next-20080528/fs/ocfs2/dlmglue.c: In function 'ocfs2_dlm_seq_show':
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds code to track the number of times the fs takes
various cluster locks as well as the times associated with it.
The information is made available to users via debugfs.
This patch was originally written by Jan Kara <jack@suse.cz>.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The stack-glue merge changed the way we use flags in dlmglue in that we now
use the fs/dlm equivalents. Unfortunately, a merge error left the new flock
code only partially updated. This took a while to show up though, because
the lock level constants are actually identical between o2dlm and fs/dlm.
The *_CONVERT and *_NOQUEUE flags have different values though, which is
eventually causing a crash in flags_to_o2dlm().
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch fixes a race that can result in an oops while adding a
lockres to the dlm lockres tracking list.
Bug introduced by mainline commit 29576f8bb5.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that
the generic stack glue code handles this, the underlying stack drivers
don't need to know about it.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Take o2hb_stop() out of the o2cb code and make it part of the generic
stack glue as ocfs2_leave_group(). This also allows us to remove the
ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now
part of stackglue.c. o2cb no longer needs a ->hangup() function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2 needs to call out to the hb_ctl program at unmount for all cluster
stacks. The first step is to move the hb_ctl_path sysctl out of the
o2cb code and into the generic stack glue.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences the build warnings concerning o2net_init_nst()
and friends when building without CONFIG_DEBUG_FS enabled.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences the build warnings concerning dlm_debug_init()
and friends when building without CONFIG_DEBUG_FS enabled.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences the build warnings concerning o2net_debugfs_init()
and friends when building without CONFIG_DEBUG_FS enabled.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The static structure describing the userspace cluster plugin for ocfs2
was named 'user_stack', which is a real pain when people are grep(1)ing
the tree for the program stack object 'user_stack'. Change the name to
something distinct and namespaced.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
kmalloc() during a localalloc window move can trigger the mm to prune
the dcache which inturn can trigger the fs to delete an inode causing
it start a recursive transaction.
The fix also makes the change in kmalloc during localalloc shutdown
just to be safe.
Fixes oss bugzilla#901
http://oss.oracle.com/bugzilla/show_bug.cgi?id=901
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds the ability to change attributes of a symlink.
Fixes oss bugzilla#963
http://oss.oracle.com/bugzilla/show_bug.cgi?id=963
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
